UNIVERSITATEA DUNĂREA DE JOS DIN GALAŢI FACULTATEA DE MECANICĂ

Transcription

1 UNIVERSITATEA DUNĂREA DE JOS DIN GALAŢI FACULTATEA DE MECANICĂ Str. Domnească nr. 111, Tel./Fax: Galaţi, România Lucrări publicate în reviste naţionale B+ (CNCSIS) Mihailescu, D., Constantin, E., Georgescu, B., Belcin V., Hardness Vickers HV 10 modifications at hyperbaric PF-position dry welding, Annual Scientific Journal of Ovidius University, Mechanical Engineering Series, Volume XII, Tom I, Ovidius University Press, Constanta, 2010, ISSN , pag Iordachescu D., Iordachescu M., Georgescu B., Scutelnicu E., Ruiz-Hervias J.: Magnetarc Welding Peculiarities of Joining Thin Wall Tubes, Metalurgia nr.1, 2010, Editura FMR, ISSN pag Visan D., Birsan D. C., Mircea O., Mechanical Properties of the Joints in the Electroslag with Electromagnetic Agitation, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, 2010, ISSN , pag Visan D., Nenita G., Mistodie L., Bormambet M., The Influence of Electromagnetic Agitation on Electroslag Welding, Annual Scientific Journal of Ovisius University, Mechanical Engineering Series, Volume XII, Tom I, 2010, ISSN , pp Mircea O., Visan D., Birsan D. C., Residual Stresses in Welded Joints: Analytical Solution, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, 2010, ISSN , pag Georgescu B., Corrosion phenomenon in Aluminium-Copper mechanical joints, The Annals of Dunarea de Jos University of Galati, Fascicle XIII, Welding Equipment and Technology, ISSN , Year XX, 2010, pag Georgescu B., Mircea O, Indirect cold welding on cogged surfaces, The Annals of Dunarea de Jos University of Galati Fascicle XII Wleding Equipment and Technology Volume 21 (Year XXI), 2010, pag Birsan D., Scutelnicu E., Stan F., Hardness of friction stir welded joints of AA6061-T6 Aluminium alloy, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, 2010, ISSN , pag Birsan D. C., Visan D., Mircea O., Numerical Simulation of Transient Temperature and Von Mises Stresses of the FSW Process, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, 2010, ISSN , pag Rusu, C.C., Mistodie, L.R, Thermography Used in Friction Stir Welding Processes, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, ISSN , 2010, pag , Scopus, Belcin, V., Mihailescu, D., Nenita, G., The Sonorous Emission analysis of Electric Arc Welding as the Possibility of Estimating the Mass Transfer to Short-arc Welding, Petroleum - Gas University of Ploiesti, Bulletin Technical Series, Vol. LXII, No. 2/2010, ISSN , pag Ene N., Scutelnicu E., Solutions for productivity improvement of thick sections welding, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, 2010, ISSN , pag Ursachi L., Scutelnicu E., Welding research journals included in ISI Web of Knowledge database, The XXI, 2010, ISSN , pag

2 Frincu, O., Mihailescu, D., Zburlea, I. M., Root-pass Weld Quality at MAG Mechanized in Vertical up Position PF in Naval Field, Annual Scientific Journal of Ovidius University, Mechanical Engineering Series, Volume XII, Tom I, Ovidius University Press, Constanta, 2010, ISSN , pag Stanciu, L., Mihailescu, D., Mihailescu, A., Zburlea, M., Microhardness Vickers HV 1 Modifications at PC Position MAG - C Mechanized welding with Ceramic Backing, Petroleum - Gas University of Ploiesti, Technical Series, Vol. LXII, No. 2/2010, ISSN , pag Zburlea, I. M., Mihailescu, D., Frincu, O., WIG Manual Welding for Pipes of Heat Rezistant Steel Type 15Mo3 Mark, Annual Scientific Journal of Ovidius University, Mechanical Engineering Series, Volume XII, Tom I, Ovidius University Press, Constanta, 2010, ISSN , pag Zburlea, I. M., Mihailescu, D., Frincu, O., WIG Manual and Mechanized Welding of Heat Rezistant Steel Pipes Type 10CrMo9-10 Mark, Annual Scientific Journal of Ovidius University, Mechanical Engineering Series, Volume XII, Tom I, Ovidius University Press, Constanta, 2010, ISSN , pag Scutelnicu E., Birsan D., Iordachescu M., Computational modelling of friction stir welding initial plunging phase, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, Pag , ISSN Scutelnicu E., Iordachescu M., Iordachescu D., Arc welding of dissimilar metals: FEA and experiments in case of copper carbon steel joints, Metalurgia nr.1, 2009, Pag , Editura FMR, ISSN , 3. Mihăilescu, D., Stanciu, L., Mihăilescu, A., Zburlea, I. M., Researches concerning the upward butt welding in the ferrous, Revista Sudura, Nr. 6, 2009, ISSN , pag Mihăilescu, D., Stanciu, L., Mihăilescu, A., Microhardness Vickers HV 1 Modification at PF Position MAG - C Mechanized Welding with Ceramic Backing, The Annals of Dunărea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN , pag Mihăilescu, D., Mihăilescu, A., Hardness Modifications at 4G+position Hyperbaric Dry Welding, The Annals of Dunărea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN , pag Mihăilescu, D., Zburlea, M., Marin, V.D., Mihăilescu, A., WIG Manual Welding of Termoresistant Steel Pipes 13CrMo4-5TC2 Mark, The Annals of Dunărea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN , pag f 7. Mihăilescu, D., Stanciu, L., Mihăilescu, A., Microhardness Vickers HV 1 Modification at PC Position MAG - M Pulse Arc Mechanized Welding with Ceramic Backing, The Annals of Dunărea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN , pag Iordachescu M., Iordachescu D., Scutelnicu E., A cold press welding of aluminium original theoretic and experimental approach, Metalurgia nr. 3, 2009, Pag. 5-11, Editura FMR, ISSN Iordachescu M., Iordachescu D., Scutelnicu E., Cold press welding of aluminium original theoretic and experimental approach, Metalurgia nr. 5, 2009, Pag. 5-11, Editura FMR, ISSN , 10. Visan D., Birsan D., Mircea O., Electro thermo-magnetic field changes in case of electro-slag welding using electromagnetic agitation, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN , pag Mircea O., Visan D., Birsan D., Properties analysis of the X60 welded joint using unidirectional test specimens, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN , pag Georgescu B., Iordachescu D. New coil variant for magnetic control. The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, ISSN , Year XX, 2009, pag Georgescu B. Procedure of welding by cold pressure on cogged surfaces. The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, ISSN , Year XX, 2009, pag Georgescu B., Maier C. The Model of Aluminium Deformation Cold-welded on Cogged Surfaces. The Annals of Dunarea de Jos University of Galati, Fascicle V, Technologies in Machine Building, ISSN , Year XXVII, 2009, pag

3 Birsan D., Visan D., Mircea O., Temperature monitoring in friction stir welding using thermovision method, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN , pag Mistodie, L.R, Joni, N., Artificial intelligence in welding processes, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, ISSN , 2009, pag Mistodie, L.R, Rusu, C.C., Voicu, C., Arc Welding Investigation Using Laser Shadowgraph Method, The XX, ISSN , 2009, pag Neniţă, G.M., Parameters influences on current intensity in soldering applications, The Annals of Dunărea de Jos University of Galaţi, Fascicle XII, Welding equipment and technology, Year XX, 2009, ISSN , pag Neniţă, G.M., Experimental results obtained in spot pressure electricalsoldering, The Annals of Dunărea de Jos University of Galaţi, Fascicle XII, Welding equipment and technology, Year XX, 2009, ISSN , pag Rusu, C.C., Mistodie, L.R, Techico-Economical Considerations on Abrasive Water Jet Cutting, The XX, ISSN , 2009, pag Georgescu V., Iordachescu D., Georgescu B. Characteristic features in the magnetically impelled arc butt welding. Romanian Welding Society s review SUDURA, ISSN , Nr 3 / 2009, pag Georgescu, V., Rusu, C.C., Achievements of Robotics and Welding Department in the period , The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, ISSN , 2009, pag Voicu, C., Mistodie, L.R, Joni, N., Rusu, C.C., TANDEM Welding Methods in Shipbuilding, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, ISSN , 2009, pag , IndexCopernicus 24. Voicu, C., Mistodie, L.R, Rusu, C.C., Welding Arc Monitoring Using Artificial Vision, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, ISSN , 2009, pag , IndexCopernicus 25. Voicu, C., Mistodie L.R., Rusu, C.C., Correlations between Drops Dynamics and the GMAW-P Arc Stability The Annals of Dunarea de Jos University of Galati, Fascicle V - Technologies in Machine Building, Year XXVII (XXXII), 2009, ISSN , pag , 26. Voicu, C., Mistodie L.R., Rusu, C.C., Synergic Regimes Optimisation of Pulsed MIG Arc Welding, The Annals of Dunarea de Jos University of Galati, Fascicle V - Technologies in Machine Building, Year XXVII (XXXII), 2009, ISSN , pag Scutelnicu E., Constantin E., Iordachescu M., Ocana J. L., Naval propellers reconditioning by Friction stir welding FSW, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, ISSN , 2008, pag Georgescu V., Iordachescu D., Scutelnicu E., Study of magnetizing systems for magnetarc welding, The XIX, ISSN , 2008, pag Iordachescu M., Scutelnicu E., An overview of welding in solid state, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, ISSN , 2008, pag Iordachescu M., Scutelnicu E., Iordachescu D., Planas Roselló J., Ocaña J. L., Strain-Hardness Correlation in Aluminium Butt Cold Welded Joints, SUDURA, Year XVIII-2/2008, ISSN , pag Visan D., Mircea O., Birsan D., Simulation of the electromagnetic agitation of the molten pool, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, 2008, ISSN , pag

4 Mircea O., Visan D., Birsan D., Georgescu B., Thermal fields and residual stresses in welded joints: FEA and experiments, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, 2008, ISSN , pag Georgescu B., Georgescu V. New welding techology the cold welding on cogged surfaces. The Annals of Dunarea de Jos University of Galati, Fascicle IX, Metallurgy and Materials Science, ISSN X, Year XXV, No , pag Georgescu B., Mircea O., Mechanical resistance of spot cold aluminium welded joints, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, 2008, ISSN , pag Birsan D., Visan D., Mircea O., Numerical simulation of transient temperature and Cauchy stresses of the friction stir welding process, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, 2008, ISSN , pag , 10. Birsan D., Iordachescu D., Ocana J.L., Vilaca P. FEM model for friction stir welding of aluminium, The XIX, 2008, ISSN , pag Banea M., Lucas F M da Silva, An overview of adhesively bonded joints in fibre reinforced plastic composite materials, The Annals of Dunarea de Jos University of Galati Fascicle XII, Welding Equipment and Technology, Year XVII, 2008, pag , ISSN , 12. Riţiu, Şt. Ghe., Mihăilescu, D., Vişan, D., Reconditioning by Welding of Magnesium Alloy RZ5, The Annals of Dunărea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX/ 2008, ISSN , pag Constantin E., Mistodie L., Consideratii teoretice si rezultate experimentale la transferul masic prin arcul electric, Revista Asociatiei de Sudura din Romania SUDURA, ISSN , Nr 1 din 2007, pag Iordachescu, D., Iordachescu, M., Quintino, L., Miranda, R.M., Properties of MIG brazed joints on thin sheet, BID ISIM, 3/2007, ISSN , pag Scutelnicu, E., Iordachescu, M., Georgescu, B. - Dissimilar metals welding - FEA and experiments, The XVII, 2007, ISSN , pag Iordachescu, M., Scutelnicu, E., Quintino, L., Iordachescu, D., Vilaca, P. - Friction stir processing: tools design and microstructural characterization, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XVII, 2007, ISSN , pag , 5. Georgescu, B., Iordachescu, M., Scutelnicu, E., Georgescu, V. - Aluminium deformation model in case of cold-welding on cogged surfaces, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XVII, 2007, ISSN , pag. 5-10, 6. Georgescu B., Georgescu V., Study of stresses and strains during cold welding on cogged surfaces. Revista Asociatiei de Sudura din Romania SUDURA, ISSN , Nr 2 din 2007, pag. 4-10, 1. Iordachescu, D., Quintino, L., Miranda, R., Pimenta, G., Brazed Joints Properties of the Automotive Galvanised Thin Sheets, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Year XVI, 2006, p , ISSN Iordachescu, D., Iordachescu, M., Mistodie, L., Raport de Cercetare Grant: A - Sistem de Monitorizare si Comanda a Proceselor de Brazare cu Arc Electric a Tablelor Subtiri pentru Autovehicule, Revista de Politica Stiintei si Scientometrie, Numar Special 2006, ISSN , 45 pag 3. Mihailescu, D., Mihailescu, A., Hardness Modifications at 3G-Position Hyperbaric Dry Welding, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XVII/2006, ISSN , pag Scutelnicu, E., Iordachescu, M., Approaches on Heat Lost of the Welded Joints, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XVII, 2006, pag , ISSN

5 5. Iordachescu, M., Scutelnicu, E., Iordachescu, D., Fundamentals of the Process and Tools Design: Friction Stir Processing of Materials, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XVII, 2006, pag , ISSN , 6. Visan D., Birsan D., Microstructural characteristics of the electro-slag welded joints due to the electromagnetic agitation, The Annals of Dunărea de Jos University of Galati, Fascicle XII Welding Equipment and Technology, 2006, ISSN , pag. 7. Mircea O., Banea D.M. Theoretical and experimental stresses and deformations of the butt welded joints, The Annals of Dunărea de Jos University of Galati, Fascicle XII Welding Equipment and Technology, 2006, ISSN , pag Georgescu B., Iordachescu M., Georgescu V., Varieties of cold welding on cogged surfaces, The Annals of Dunarea de Jos University of Galati, Fascicle XII, ISSN , Year XVII, 2006, pag , 9. Belcin V., Nenita G. M., The molten metal at the end of electrode wire, The Annals of Dunărea de Jos University of Galati, Fascicle XII Welding Equipment and Technology, 2006, ISSN