Foxview Circle SANDY SPRING BUILDERS TECHNICAL GUIDE B CASEMENT WINDOWS

Transcription

1 B3 Foxview Circle SANDY SPRING BUILDERS TECHNICAL GUIDE B CASEMENT WINDOWS

2 PRODUCT FEATURES SPECIFICATIONS STYLES GLAZING STANDARDS METAL CLADDING Traditional, Mission, French, Push Out models. Quarter Round, Full Radius and Camber Top options. STANDARD FEATURES Natural, clear Douglas Fir interior (no visible finger joints) (116 mm) jamb construction Low E insulated glazing with 1/2" (13 mm) airspace Roto gear operator and concealed sash locks Extruded aluminum cladding in a variety of standard colors, primed wood or clear fir exterior Flexible continuous weatherstrip system Insect screens with High Transparency mesh option handle, cover, and locks HARDWARE Multiple hardware type and finish choices are available. See the Hardware in section A for more information. Heat-Smart Double, Heat-Smart Triple, Tranquility and StormForce. StormForce is not available on all products. SIMULATED DIVIDED LITES (SDL) Ogee Profile 3/4" (19 mm), 1 1/8" (30 mm), 2" (51 mm) Putty Profile (16 mm), 7/8" (22 mm), 1 1/8" (30 mm), 2" (51 mm) Square Profile (interior only) 3/4" (19 mm), 7/8" (22 mm), 1 1/8" (30 mm), 2" (51 mm) CASING WOOD: 2" (51 mm) Brickmould, 3 1/2" (89 mm) Flat, 5 1/2" (139 mm) Flat, Adams and Williamsburg. METAL CLAD: 2" (51 mm) Brickmould, 3 1/2" (89 mm) Flat, 2" clad frame extension. Nose & Cove, Adams, Williamsburg and Contemporary. METAL CLAD COLOR SPECTRUM Standard and Architectural Palette colors, including anodized finishes. Available in Cyprium Collection (see section N). Most units have been tested by an independent laboratory for air and water infiltration, structural performance, and thermal performance requirements. FRAME & SASH Manufactured from Coastal Douglas Fir kiln-dried lumber with frame construction designed for (116 mm) jamb. All wood exterior components are factory primed unless specified as clear exterior. Minor scratches or abrasions in the wood surface or primer are not considered defects. ALTERNATE SPECIES The entire Loewen product line is also available in optional Mahogany or optional chain of custody certified Douglas Fir (SCS-COC-0051). PRESERVATIVE TREATED All wood parts are dipped in approved preservative. GLAZING With countless glazing configurations and Low E coating options, we ensure that you can choose the perfect blend of protection Heavy duty exterior metal cladding comprised of extruded aluminum is available in a variety of Standard and Architectural Palette colors, including anodized and Cyprium (copper and bronze cladding). Interior of window can be natural wood (unfinished) or primed. clad units are supplied ready-toinstall complete with integral metal nailing flange. HARDWARE Standard sash opens out to nearly 90 degrees for ease of cleaning. The roto gear operator will hold the sash at any position in its operating radius. The sash is supported by concealed heavy-duty hinges. All steel components are coated for superior corrosion protection. HARDWARE OPTION Operator and sash locks are standard in bronze, linen, sandstone or black. Optional finishes are available at an additional charge. DOUBLE WEATHERSTRIP The combination of a continuous, flexible foam weatherstrip and a flexible automotive type bulb weatherstrip ensures maximum energy efficiency and protection against air and water infiltration. and comfort. B2 HARDWARE STYLES Folding Crank Handle Push Out Handle Multipoint Lock Traditional Mission Mission French LEGEND: Standard Optional Push Out French (Camber Top) VARIABLES Function: Use for Egress 3 Available with Screen Concealed Hardware Durability: Low Maintenance 1 Clear Douglas Fir Finish Clear Mahogany Finish Traditional Mission Push Out French Push Out INSULATING GLASS Double or triple glass configurations with 1/2" (13 mm) airspace. HEAT-SMART SYSTEMS Heat-Smart best describes the benefits of the product that incorporates Low E coating and argon gas. Heat-Smart systems help reduce heating and cooling costs, providing superior energy efficiency. SIMULATED DIVIDED LITES (SDL) Standard SDL complete with airspace grilles, where available. Grille bars are permanently applied to the interior and exterior. Screens available in bronze, linen, sandstone, Tuscany brown, brushed aluminum or black aluminum frame, screened with anti-glare fiberglass cloth. -framed screens and High Transparency mesh available. Optional Retractable Screen and Swinging Screen available. Swinging Screen available on Push Out models only. EGRESS Consult local building codes for confirmation of size requirements for your area. Special egress hardware is available for windows, which enables some sizes to meet egress codes, eliminating the need to go to the next larger size window. Consult your Authorized Loewen Dealer for more details. B3 Primed Finish Cyprium Collection Performance: Heat-Smart Double FINISH OPTIONS: REFER TO SECTION A. 1 Various Standard and Architectural metal clad colors, including anodized finishes 2 Swinging as standard, retractable screen optional Heat-Smart Triple Tranquility StormForce Appearance: SDL Visit the Loewen Photo Gallery online at for a large collection of Loewen product and elevation photography. Numerous custom window configuration opportunities exist please contact your Authorized Loewen Dealer. Specifications and technical information are subject to change without notice. Imperial and metric measurements are converted accurately. However, in some cases, industry standards cause a 1 mm variance. (Example: 3/4" is shown as 19 mm for all glass measurements.) CAD Download: Installation Instructions: 3 Some size restrictions apply

3 L R CASEMENT 1 WIDE WINDOW SIZES OVERSIZED CASEMENT WINDOW (ROTO GEAR ONLY) 16 1/2 [9] 20 7/16 [519] 16 1/2 [9] 20 7/16 [519] 15 3/4 [400] 19 11/16 [500] [] 15 3/4 [400] 19 11/16 [500] [] [10] 9 3/4 [247] 13 11/16 [347] 7/16 R.O 9 3/4 [247] 13 11/16 [347] 7/16 [847] 35 1/4 [895] [1047] 25 1/16 [6] [] 17 3/8 [4] /16 [7] * /16 [5] [8] * 1010 * /16 [786] 23 5/16 [592] /16 [10] * 1011 * /4 [6] S /16 [10] * 1012 * 1112 * /16 [10] 3/16 [7] [8] /4 7/8 [12] [13] [14] * 1014 * 1015 * 1016 * 1114 * 1115 * 1116 * 1214 * 1215 * 1216 B4 11/16 [10] * 1018 * 1118 * 1218 B5 3/4 7/8 [12] [13] [14] 76 7/16 [19] Size = + 15/16" (24 mm) New oversized CA operator up to 1224 watch for sizes where tempering, triple sash stabilizer etc. are required roto gear only rectangular /8 [2436] 95 1/4 [29] 94 1/2 [2400] 76 7/16 [19] 88 1/4 [22] Size = + 15/16" (24 mm) *Only available with roto gear hardware * 04 * 0524 * 0624 * 0724 * 7524 * 0824 * 0924 * 1021 * 1024 * 1121 * 1124 * 1221 * 1224 Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. Meets US Egress Meets Canadian Egress Egress calculations are based on the unit being opened at 70 for washability hinge, 80 for egress hinge, and having minimum clear openings of: USA: 20" in width, 24" in height, with a total egress area of 5.7 Sq Ft CAN: 15" in width, 15" in height, with a total egress area of 3.8 Sq Ft Please check your local building codes for any variation in Egress Standards from those stated above. For egress information, contact your Authorized Loewen Dealer. Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order.

4 L R L F CASEMENT 2 WIDE WINDOW SIZES F FIXED CASEMENT WINDOW SIZES 3/4 16 1/2 [9] 20 7/16 [519] 15 3/4 [400] 19 11/16 [500] [] [10] 9 3/4 [247] 13 11/16 [347] 7/16 9 3/4 [247] 13 11/16 [347] 7/ /8 [847] 35 1/4 [895] 25 1/16 [6] [] 17 3/8 [4] /4 [336] 12 9/16 [319] 11 13/16 [300] 5 9/16 [1] /16 [5] /16 [436] 16 1/2 [9] 15 3/4 [400] 9 1/2 [2] /16 [786] 23 5/16 [592] /8 [536] 20 7/16 [519] 19 11/16 [500] 13 7/16 [3] /4 [6] /16 [6] [] 17 3/8 [4] /16 [7] /16 [5] /16 [10] [8] /16 [786] 23 5/16 [592] 25 1/4 [6] B6 11/16 3/4 [10] 7/8 [12] [13] [14] 76 7/16 [19] Size = + 15/16" (24 mm) /16 11/16 3/4 [10] 3/16 [7] [8] [10] 7/8 [12] [13] [14] 76 7/16 [19] B /16 [2436] 95 1/4 [29] 94 1/2 [2400] 88 1/4 [22] Size = + 15/16" (24 mm) Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. Meets US Egress Meets Canadian Egress SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. Egress calculations are based on the unit being opened at 70 for washability hinge, 80 for egress hinge, and having minimum clear openings of: USA: 20" in width, 24" in height, with a total egress area of 5.7 Sq Ft CAN: 15" in width, 15" in height, with a total egress area of 3.8 Sq Ft Please check your local building codes for any variation in Egress Standards from those stated above. For egress information, contact your Authorized Loewen Dealer. Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. For Masonry opening information see page A24-A. Information is subject to change without notice. CAD Download and nstallation Instructions:

5 F FIXED CASEMENT WINDOW SIZES L LR R FRENCH CASEMENT WINDOW SIZES [219] 3/4 79 1/2 [2019] 95 1/4 [29] 1/8 [1044] 3/4 78 3/4 [2000] 94 1/2 [2400] 40 3/8 [1025] [10] [1047] 49 1/8 [1247] 53 1/16 [1347] 56 15/16 [1447] 64 13/16 [1647] 72 11/16 [1847] 76 5/8 [1947] 88 7/16 [2247] 10 5/16 [262] 14 1/4 [362] 14 3/4 [374] 15 3/8 [386] 18 3/16 [462] 22 1/8 [562] 24 1/8 [612] 26 1/16 [662] 30 [762] 13 1/4 [336] 12 9/16 [319] 11 13/16 [300] 5 9/16 [1] /16 [6] [] 17 3/8 [4] /16 [436] 16 1/2 [9] 15 3/4 [400] 9 1/2 [2] /16 [5] /8 [536] 20 7/16 [519] 19 11/16 [500] 13 7/16 [3] /4 [6] * B8 25 1/16 [6] 30 15/16 [786] 11/16 11/16 3/4 [] [10] 17 3/8 [4] 21 5/16 [5] 23 5/16 [592] 25 1/4 [6] 3/16 [7] [8] [10] 7/8 [12] [13] [14] 76 7/16 [19] /16 11/16 3/4 [10] 3/16 [7] [8] [10] 7/8 [12] [13] [14] Size = + 15/16" (24 mm) * Only available with roto gear hardware Only available lwith Push Out hardware * 1009 * 1010 * 1011 * 1012 * 1014 * 1015 * 1016 * 1018 Minimum width roto gear * * 1818 B /16 [2436] 95 1/4 [29] 94 1/2 [2400] 88 1/4 [22] Size = + 15/16" (24 mm) Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. Meets US Egress Meets Canadian Egress Egress calculations are based on the unit being opened at 70 for washability hinge, 80 for egress hinge, and having minimum clear openings of: USA: 20" in width, 24" in height, with a total egress area of 5.7 sq ft CAN: 15" in width, 15" in height, with a total egress area of 3.8 sq ft Please check your local building codes for any variation in Egress Standards from those stated above. For egress information, contact your Authorized Loewen Dealer.

6 CAMBER TOP CASEMENT STANDARD RADIUS ELEVATIONS L F CAMBER TOP CASEMENT 1 WIDE WINDOW SIZES IMPERIAL 18 11/16 R 15 3/8 R 98 7/16 11 R 118 1/8 16 1/2 [9] 20 7/16 [519] 78 3/ / /4 [400] 19 11/16 [500] [] R R 98 7/16 R 118 1/8 9 3/4 [247] 13 11/16 [347] 7/ / / /16 [538] / /16 [786] [588] R R 118 1/8 R / /8 [8] /2 13 3/4 94 1/2 10 5/ /8 1/16 [738] [838] /16 R 11 15/ /8 R 118 1/8 8 3/8 126 R /16 11/16 11/16 [10] 34 7/8 [886] 40 7/8 [1038] B10 3/4 [1238] B11 METRIC R 1500 R 1500 R R 2500 R 2500 R R 3000 R 3000 R / /16 [1338] 56 5/8 [1438] 64 1/2 [18] 76 5/16 [1938] Size = + 15/16" (24 mm) CTC R R R 3500 STANDARD SIZES SHOWN. ADDITIONAL SIZES AND RADII MAY BE AVAILABLE. CUSTOM SIZES CAN BE ORDERED Note: Custom shapes available. Custom size and radii available Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. " (800mm) radius.

7 L R L F CAMBER TOP CASEMENT 2 WIDE WINDOW SIZES L F HALF ROUND CASEMENT WINDOW SIZES 3/4 [] 9 3/4 [247] 13 11/16 [347] 7/16 7/ /16 [538] [8] /16 [786] [588] /16 [10] /8 [8] /16 [10] /16 [738] /8 [12] [838] [13] /16 [10] 34 7/8 [886] /4 [14] / /8 [1038] B12 3/4 [1238] /16 [19] B13 3/ /16 [1338] 56 5/8 [1438] 64 1/2 [18] 76 5/16 [1938] Size = + 15/16" (24 mm) Size = + 15/16" (24 mm) Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. " (1500 mm) radius. Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware.

8 CASEMENT WINDOW WALL CONNECTION CASEMENT WINDOW 1 3/16" [31] 1 7/16" [37] ROUGH OPENING ROUGH OPENING METAL CLAD DOUBLE (116 mm) WOOD EXTERIOR TRIPLE B14 ROUGH OPENING FRAME B15 METAL CLAD DOUBLE (116 mm) ROUGH OPENING FRAME 1 7/16" [37] 1 7/16" [37] WOOD EXTERIOR TRIPLE

9 PUSH OUT CASEMENT WINDOW FIXED CASEMENT WINDOW 1 3/16" [31] 1 15/16" [50] 1 7/16" [37] 1 5/16" [34] 1 13/16" [45] 2 1/2" [64] 1 15/16" [50] ROTO GEAR SASH MOULDING OPTIONS GLAZING STOP PROFILES 1 11/16" [43] METAL CLAD TRIPLE PUTTY GLAZING STOPS HINGED WOOD WOOD EXTERIOR DOUBLE (116 mm) 2" BRICKMOULD WITH STANDARD SILL NOSING HINGED WOOD 1 1/2" [39] WOOD EXTERIOR TRIPLE ADAMS CASING WITH BC SUBSILL SQUARE GLAZING STOPS RETRACTABLE PUSHOUT - SASH MOULDING OPTIONS METAL CLAD DOUBLE WITH SILL COVER TO MATCH OPERATING EXPOSED LOCKING HARDWARE WOOD EXTERIOR - SASH MOULDING OPTIONS ARE THE SAME AS METAL CLAD B16 6" [153] B17 VISIBLE GLASS 1 3/4" [44] 1 11/16" [43] 1 11/16" [43] DOUBLE RETRACTABLE DOUBLE 15/16" [24] 5/16" [8] METAL CLAD 6" [153] TRIPLE HINGED WOOD TRIPLE METAL CLAD DOUBLE (116 mm) ADAMS CASING WITH BC SILL NOSE RETRACTABLE HINGED WOOD 5/16" [8] 15/16" [24] RETRACTABLE WOOD EXTERIOR

10 MISSION CASEMENT WINDOW FRENCH CASEMENT WINDOW 1 3/16" [31] 1 7/16" [37] 1 5/16" [34] 1 9/16" [40] 2 1/2" [64] 1 15/16" [50] GLAZING STOP PROFILES 4" [102] 4" [102] 4" [102] METAL CLAD TRIPLE STANDARD WOOD EXTERIOR DOUBLE (116 mm) 2" BRICKMOULD WITH STANDARD SUBSILL RETRACTABLE WOOD EXTERIOR TRIPLE WILLIAMSBURG CASING WITH HERITAGE SUBSILL STANDARD B18 6" [153] CASING B19 2" VISIBLE GLASS [51] 4" [102] 2 1/2" [64] DOUBLE RETRACTABLE DOUBLE 15/16" [24] METAL CLAD 6" [153] 15/16" [24] TRIPLE RETRACTABLE TRIPLE 1 13/16" [45] STANDARD STANDARD METAL CLAD DOUBLE (116 mm) WILLIAMSBURG CASING WITH HERITAGE SILL NOSE RETRACTABLE 3/4" [19] 3/4" [19] WOOD EXTERIOR SEE SECTION A.

11 PUSH OUT FRENCH CASEMENT WINDOW RADIUS TOP CASEMENT WINDOW GLAZING STOP PROFILES 1 3/16" [31] [53] 1 7/16" [37] 1 5/16" [34] 2 7/8" [73] 1 15/16" [50] 1 11/16" [43] 1 1/2" [39] METAL CLAD TRIPLE STANDARD WOOD EXTERIOR DOUBLE (116 mm) 2" BRICKMOULD WITH STANDARD SUBSILL STANDARD WOOD EXTERIOR TRIPLE 3 1/2" FLAT CASING WITH BC SUBSILL STANDARD B20 CASING 6" [153] B21 1 3/16" [31] VISIBLE GLASS 1 11/16" [43] DOUBLE STANDARD DOUBLE 3/4" [19] METAL CLAD 6" [153] 3/4" [19] TRIPLE STANDARD TRIPLE SEE SECTION A. METAL CLAD DOUBLE (116 mm) STANDARD STANDARD 3/4" [19] 3/4" [19] STANDARD WOOD EXTERIOR RADIUS COMPONENT

12 PICTURE AND FIXED CASEMENT WINDOW TRANSOMS OVERSIZED CASEMENT WINDOW (ROTO GEAR ONLY) GLAZING STOP PROFILES CASING B22 B23 SEE SECTION A.

13 B24 York Mills AB8 GROUP