INSTRUCTION MANUAL AND PARTS LIST
|
|
- Blanche Smith
- 5 years ago
- Views:
Transcription
1 7360R-2SS INSTRUCTION MANUAL AND PARTS LIST
2
3
4
5
6
7
8
9 1. COVER COMPONENTS Ref. No Part No. Name Qty Face plate arm Gasket Rubber plug (ɸ19) Rubber plug (ɸ11.8) Screw Thread eyelet screw Face plate screw Behind cover Behind cover washer plate Behind cover screw Behind cover screw gasket Oil sight window components Three hole thread eyelet Three hole thread eyelet screw Small tension screw Small tension spring Small tension disc Small tension disc gasket Snap ring Small tension thread guide plate Tension knob Tension knob stopper Tension screw Tension spring Tension disc holder Tension disc Take up spring Rubber ring Tension set Tension set screw Thread release pin Tension set fixing screw Thread eyelet Thread eyelet screw Rubber (ɸ8.8) Rubber (ɸ27) Throat plate Throat plate screw Bed slide assembly Bed slide spring Bed slide spring screw Bed plate stud Spring ring Tension set Tension set screw Rubber (ɸ5.7) 1
10
11 2. THREAD TAKE UP COMPONENTS Ref. No Part No. Name Qty Thread take up components Thread take up lever link Hinge shaft of jointed lever for cross stitching Thread take up assembly 1 4a Needle shaft bushing Screw (left twist) Needle bar crank rod Needle bar connecting rod Screw Screw Thread take up lever cover Screw Needle bar brace Screw Screw Screw Needle bar bush (upper) Screw Felt plug of pin holder sleeve (up) Rubber plug Needle bar bush lower Needle bar thread guide Needle bar Thread finger Needle (DBx1) 14# Screw Needle bar connecting link guide Screw Slide block 1
12
13 3. MAIN SHAFT & UPRIGHT SHAFT Ref. No Part No. Name Qty Main shaft Screw Thrust collar assembly Screw Main shaft bush (left) Oil felt Main shaft bushing (middle) Screw Main shaft bushing (right) Main shaft bushing oil seal Hand wheel Screw End screw Cam Screw of cam Plate of cam Connecting rod Upright shaft Gear assembly Pinion assembly (upper) Screw Pinion assembly (lower) Gear assembly (lower) Bushing (upper) Bushing (lower) Screw Collar of feed driving connecting rod Screw 3
14
15 4. HOOK DRIVING SHAFT COMPONENTS Ref. No Part No. Name Qty Hook driving shaft Oil seal screw Oil seal Thrust collar asm Screw Thrust collar asm Hook driving shaft (left) Oil adjusting screw Oil adjusting spring Hook driving shaft (right) Oil pipe Plunger Plunger spring Guard plate Screw Spring washer Hook component Screw Hook set guide Screw Bobbin bushing components Bobbin 1
16
17 5. FEED MECHANISM COMPONENTS Ref. No Part No. Name Qty Feed dog Feed bar component Feed bar washer Feed dog asm shaft Feed dog screw Feed driving rocker Screw Screw Feed rocker shaft Retaining ring Feed rocker shaft bushing Thrust collar asm Screw Feed rocker shaft crank asm (right) Pin Screw Screw Pin Feed driving shaft asm Screw Thrust collar bush (left) Feed driving fork Feed driving shaft Screw Screw Oil thread 2
18
19 6. FEED ADJUSTMENT COMPONENTS Ref. No Part No. Name Qty Stitch length adjusting link lever screw Stitch length set Link lever partial shaft screw Link lever partial shaft Stitch length adjusting handle Stitch length adjusting handle pitching screw (left) Left pitching screw Stitch length adjusting handle pitching screw (right) Right pitching screw Stitch length set screw Stitch length set tension screw Stitch length set shaft sheath Stitch length set shaft Rubber (ɸ20) Screw Back sewing joy stick handle Joy stick handle pulling shaft Joy stick handle pulling spring Joy stick handle screw Pulling spring shelf Short stitch length screw Reverse feed control lever Feed reverse shaft (short) Rubber ring End screw Screw Washer Feed regulator screw Rubber ring Feed dial Connecting link Walking food pin Screw Stopper pin Stopper pin spring Connecting rod Bar Walking foot pin Walking foot link Screw Slide block 1
20
21 7. PRESSER COMPONENTS Ref. No Part No. Name Qty Hand lifter lever Hand lifter lever screw Hand lifter cam asm Rubber ring Hand lifter protecting spring Lifting lever link shaft (left) Tension release plate Lifting lever link shaft screw (left) Screw Lifting lever connecting rod Tension released plate screw Release rod Lifting lever link shaft (right) Lifting lever link shaft spring (right) Lifting lever connecting rod Spring pin Presser lever shaft bushing Presser lever Guided bracket for pressing lever Guided rack, s screw of pressing lever Guided pole Spring of pressing lever Presser spring regulator Nut Hand lifter screw Presser components Line hook Screw Screw 1
22
23 8. OIL PUMP ASM Ref. No Part No. Name Qty Oil pump Oil pump impeller Oil pump impeller screw Oil pump adjusting base Spring gasket Lubricating oil pump cover Oil adjusting plate Oil pump filter asm Oil pump screw Lower shaft oil tube Components of locating board for oil line Screw of locating board for oil line Upper shaft oil tube components Oil return tube Tapis of oil return tube Oil return tube holder 1
24
25 9. OIL RESERVOIR COMPONENTS Ref. No Part No. Name Qty Oil reservoir asm Oil drain screw Oil drain cap gasket Gasket (big) Gasket (small) Knee press rod Spring Knee controlled throttling frame Screw Nut Knee controlled lifting standing lever Knee lifter plate rod Bearing bracket Screw Knee press plate Knee press plate frame Screw Knee press plate cover Thrust ring Screw Belt cover asm 1
26
27 10. BOBBIN WINDER COMPONENTS Ref. No Part No. Name Qty Bobbin winder base asm Bobbin winder swing lever asm Bobbin winder asm Set screw Bobbin winder shaft Bobbin winder frame rod Screw Rubber brake stopper Locating hook Screw Thread tension bracket Hinge screw Tension disc Spring Tension stud nut Washer Screw Wood screw washer Wood screw Thread frame components 1
28
29 11. ATTACHMENTS Ref. No Part No. Name Qty Machine hinge Machine hinge plate Vibration proof cushion (big) Vibration proof cushion (small) Small oil reservoir Magnet Screw driver (big) Screw driver (small) Double end wrench Oil Tank Vinyl cover Rest pin 1
Briggs&Stratton 44Q B1
Accessories IPL, Briggs&Stratton 44Q777-1272-B1, 2010-03 Briggs&Stratton 44Q777-1272-B1 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 48 SHORT BLOCK 1329 REPLACMENT
More informationCM MTC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068-0050 319-556-7484 / Fax 319-556-1235 CM-2400-0MTC PARTS LIST ENGINE OIL GRADE: ENGINE OIL CAPACITY: PUMP OIL: PUMP OIL CAPACITY: NOZZLE SIZE: 30W 21 oz. MI-T-M #AW-4085-0016
More informationCM MVC & CM MHC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 CM-2400-0MVC & CM-2403-0MHC PARTS LIST (After Serial #215703) Vanguard Engine Oil Grade: Vanguard Engine Oil Capacity: Honda Engine
More informationCollator series 300/400, 310B Spare parts list
Collator series 300/400, 30B Spare parts list AUGUST 997 Part # 9049 USER INFORMATION T0703 This Spare part list is devided into one Series 300/400 section, one 30 B section and one Paper feeder section.
More informationM8400RV Base Cover Assembly Item # Part Number Part Description Qty
Base Cover Assembly Item # Part Number Part Description Qty 1 PH1741200 Base frame 1 2 PT6680100 Rubber foot 4 3 PA3741000 Frame bracket 1 4 MD4301022 Pan head screw 3 5 PA3742500 Frame bracket 1 6 MD4301022
More informationM SERIES DISPENSER M SERIES DISPENSER
M SERIES DISPENSER PART NUMBER 5006621 M SERIES DISPENSER M SERIES DISPENSER... M - 1 M15 TOP EXPLODED VIEW... M - 2 M15 TOP PARTS LIST... M - 3 M15 BASE EXPLODED VIEW... M - 4 M15 BASE PARTS LIST... M
More informationM-8400RVe Printer. Parts List. Page 1-1. P/N Rev.B
M-8400RVe Printer Parts List Page 1-1 P/N 9001085 Rev.B Table of Contents M-8400RVe Parts List Page Frame Assembly...3 Head Assembly... 8 Ribbon Assembly... 11 Feed Roller Assembly... 16 Base Cover Assembly...
More informationPARTS LIST FOR CM-1250-A/C 1.5 HP
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR CM-1250-A/C Motor Specs: Pump Oil: Pump Oil Capacity: Nozzle Size: 1.5 HP / 1 Phase / 115 Volts Mi-T-M #AW-4085-0016
More information16S151-16S181 16S221-16S251 Planetary Gear with HELICAL TEETH
400.195 ZF EcoSplit Models 16S151-16S181 16S221-16S251 Planetary Gear with HELICAL TEETH 04/2008 File ZFE0023.Pdf 1 Z.F. EcoSplit III 6S151 to 16S25 6S251 From 16S1 suitable to : Planetary Gear with HELICAL
More informationMDT3 and MDT4 Service Parts
This parts lists contains part numbers for the service parts available for the MDT and MDT4. They have been manufactured in both 60 Hz and 50 Hz models. The 60 Hz models are: MDTF-A or MDTFA-H MDT4F-A
More informationENGLISH INSTRUCTION MANUAL
ENGLISH INSTRUCTION MANUAL * "CompactFlash(TM)" is the registered trademark of SanDisk Corporation, U.S.A. CONTENTS. PREFACE.... SET-UP... () Installing M-9 small sized motor unit... () Installing to the
More informationFor printer model: TG3 Series
RFID User Guide Parts List For printer model: TG3 Series PN: 9001227(A) Read this User Guide before and during usage of the above product. Keep this document handy for future reference. www.satoamerica.com
More informationM-8460Se Printer Standard Unit
M-8460Se Printer Standard Unit Parts List Page 1-1 P/N 9001090 Table of Contents M-8460Se Spare Parts List Page Frame Assembly...3 Print Head Assembly...8 Ribbon Assembly... 11 Platen Frame Assembly...14
More informationPower Rack with Lat Pull
Power Rack with Lat Pull BD-7 Owner's Manual VA0900 D SAFETY & PRECAUTIONS IMPORTANT: READ ALL PRECAUTIONS CAREFULLY BEFORE USING THIS PRODUCT. RETAIN OWNER'S MANUAL FOR FUTURE REFERENCE. Note: This item
More informationSPECIAL TOOLS BULLETIN
SPECIAL TOOLS BULLETIN Title: MANDATORY VOLVO SPECIAL TOOL LIST Supersedes the November 16, 2009 edition. 1 of 12 Car Market: United States, Canada : YEAR MONTH DAY 2010 07 29 The following tools have
More informationContents Section 9, Illustrated Parts
Contents Section 9, Illustrated Parts Figures 9-1. Parts of RT7... 9-5 9-2. RT7 Drive Assembly... 9-9 9-3. RT7 Refrigeration System... 9-10 9-4. Parts of RT7 PLUS... 9-15 9-5. RT7 PLUS Drive Assembly...
More informationCME500 SERVICE PARTS
This section contains the parts illustrations and parts lists for the CME500. CME500 ice machines are manufactured in both 115 volt, 60 cycle and 220 volt, 50 cycle. When ordering electrical parts, be
More informationRevision 1.0 Parts List Mega
Revision.0 www.grindex.com Parts List 824.400 Mega Table of Contents Table of Contents Introduction... 2 Specially approved products...2 Product Description...3 The data plate...3 Exploded Views...4 Drive
More informationPARTS LIST ERSATZTEILLISTE LISTE DE PIECES
MBS-708CS Metal Working Bandsaw 50000331T 400/50/1 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES WMH Tool Group AG Bahnstrasse 24, CH 8603 Schwerzenbach www.wmhtoolgroup.ch; info@wmhtoolgroup.ch Tel +41 (0)
More informationBelts ITEM DESCRIPTION FITS MACHINES
Belts PDG.83226.50 4 Row Belt PDG 8000P (propane) PDG.83226.30 3 Row Belt PDG 8000P (propane) PDG.83226.00 Belt, 3/3VP 450 GATES PDG 8000P (propane) PDG.80039.00 Belt, PK21 Bottom PDG 8000 PDG.80040.00
More informationRevision 1.0 Parts List Mega
Revision.0 www.grindex.com Parts List 824.390 Mega Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. Products included... 3 2.2 The data
More informationSPARE PARTS OVERVIEW.
SPARE PARTS OVERVIEW www.spiro.ch CONTENTS Contents Spare Parts Packages... 4 Silver Package...4 Tubeformer Packages - Formroller Units...5-8 Tubeformer Packages - Slitter Maintenance...9 Tubeformer Packages
More informationMITSUBISHI. Mitsubishi Limiservo X G series TECHNICAL INFORMATION MANUAL
MITSUBISHI Mitsubishi Limiservo X G series TECHNICAL INFORMATI MANUAL Motor XL-G554-10(Y), XL-G554-20(Y) Control box XC-GMFY(CE) Induction type AC servo motor and control box with automatic needle positioner
More informationBasics of building the ROV Rev2
Basics of building the ROV Rev2 www.rollette.com/rovrev2 1. Assemble the PVC pipe hull as shown below. All pieces are off the shelf parts. The only parts that need to be cut to length are the 2 pipe. This
More informationFord F Super Duty and E Series Installa4on Instruc4ons
Ford F Super Duty and E Series Installa4on For more information, contact your local Motion Reseller or Motion Representative wwwmotioncomputingcom 1) Using a plas,c trim panel removal tool, take out the
More informationAristoMig U320w 208/230/400/460/475/500 V 3~ 50/60 Hz With cooling unit and central connection
Spare parts list Edition 060727 Valid for serial no. 310 -xxx -xxx, 445 -xxx -xxx, 620 -xxx -xxx The AristoMig 450 power source is renamed: New name Old name Mig 4500i AristoMig 450 Mig U4500i AristoMig
More information12A-969D190 LC-215 (1997) Page 1 of 12 Cables And Pivot Shaft
12A-969D190 LC-215 (1997) Page 1 of 12 Cables And Pivot Shaft 12A-969D190 LC-215 (1997) Page 2 of 12 Cables And Pivot Shaft 1 746-0939 1 S 6 Spd. Cable Code: N Notates a new part (not 2 656-0613 1 S Pulley
More information1Ver.0.2OldStyle. t r i. v t o. m e. a c
Se r v omo t o rf o r I ndus t r i a lse wi ngma c hi ne SV7 1Ver.0.2OldStyle or hmot c t u l c hana gt n i v a s gy r ne e e r o m ntand e i c i f f e e r Mo SV-71 INSTRUCTION MANUAL Ver. 0.2 Old Style
More informationPhone Horizontal Multistage Pumps Horizontal Stainless Steel Multistage Pumps 3, 6, 9 m³/h
Horizontal Stainless Steel Multistage Pumps 3, 6, 9 m³/h Horizontal Multistage Pumps 50 Hz Stainless Steel 3-9 m3/h Model Number Explanation Example: 3AMH2B-51 3 = m 3 /h AMH = Series 2 = # of Stages
More informationTYPE ASR 650 / 850 FLAT LIST 1/3
TYPE ASR 650 / 850 FLAT LIST 1/3 TYPE ASR 650 / 850 FLAT LIST 1/3 NR. ARTICLECODE DESCRIPTION REMARKS 1 110006000.2 Fixation (grey) for antenna ASR 650 FLAT 1 110006004 Fixation (grey) for antenna ASR
More informationNava Buffet Assembly Instructions
Thank you for your purchase. lease follow the instructions below for correct assembly. B dowel x0 x1 bolt x H height adjuster x1 bracket x Q clip x R locking nut x K seal x S F x shelf plugx8 x8 L hinge
More information2018 PARTS CATALOG. Head Office - Calgary, AB, Canada Mounting, Parts, Service, Engineering, Administration
2018 PARTS CATALOG 2018 PARTS CATALOG DY has you covered, coast to coast, country to country. With parts for all pump brands in stock, our parts and service departments are there when you need us most.
More informationFIST-GCOG2-Dx6. Follow all local safety regulations related to optical fiber plant elements.
FIST-GCOG2 I N S T A L L A T I O N I N S T R U C T I O N TC-986-IP Rev A, Mar 2017 www.commscope.com FIST-GCOG2-Dx6 Content 1 Introduction 2 General 2.1 Abbreviations 2.2 Kit contents 2.3 Tools 2.4 Accessories
More informationSchumacher Irrigation, Inc. Phone: or Fax:
Page 38 Nu-Flex Tubing & Siphon Tubes Oetiker Clamp (Single Ear) -Oetiker ear type clamps "Breathe" and adapt to the expansion and contraction of hose affected by thermodynamics or aging, no need to retighten
More informationAssembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door
CHAPTER 8 Assembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door July 13, 2012, This document provides you with the procedures you perform to assemble and mount the
More information98027-Body Posts 98037-Receiver Mount 98038-Battery Holder 98039-Battery Mount 98090-Adjustable Linkage (not include Extra Longer version ) 98091-Center Linkage 140*6.0mm(94880 /T2 T3 T6) 97002-Center
More informationFOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N
FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N In-line and butt version Cold applied re-usable fiber optic closure Contents 1 Introduction 1.1 Product description 1.2 Capacity 2 General
More informationNo-Hub Couplings Drainage Drains Cleanout Plugs Cover Plates
Flexible Couplings Transitions all types of DWV plastic, copper, steel, cast iron and clay pipe. 300 series stainless steel clamps Flexibility - Sleeve is manufactured of molded natural and synthetic rubber
More informationCoyote popup display set up instructions
Coyote popup display set up instructions Frame 1 2 3 Prepare frame for assembly by locating the purple hooks on top of the frame. Stretch frame to size, snapping magnetic locking arms together. Attach
More informationparts catalog vulcano automatic
parts catalog vulcano automatic V1.3 Please consider the environment before printing dimensions 3 NOTE: 4 Grinder 5 Grinder GRINDER 1 M.1.003 HOPPER COVER 2 M.1.004 COMPLETE VULCANO HOPPER SET 3 M.1.005
More informationRevision 1.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded view...
More informationMultifunction Table and HANSS with Biofeedback February 26, 2010 Weekly Presentation
Multifunction Table and HANSS with Biofeedback February 26, 2010 Weekly Presentation Team #1 Mark Galiette, Liz Hufnagel, Dan Tichon Client: Annalee Hughes Final Design Completed Work: o o HANSS 1. Mounting
More informationMF-4000 WEIGHT BENCH OWNER S MANUAL
MF-4000 WEIGHT BENCH OWNER S MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner s manual for future
More informationSPIRAL MIXERS CONTENT CHAPTER 1 COMPANY BRIEF INTRODUCTION OPERATION INSTRUCTION
SPIRAL MIXERS OPERATION INSTRUCTION CONTENT CHAPTER 1 COMPANY BRIEF INTRODUCTION.....P1 CHAPTER 2 PRODUCTION INTRODUCTION.....P2 2.1 Machine trait........p2-3 2.2 Technical parameter.......p4-6 CHAPTER
More informationNava Entertainment Unit Assembly Instructions
ava ntertainment nit ssembly nstructions Thank you for your purchase. Please follow the instructions below for correct assembly. B dowel x2 x8 H locking nut x22 Q x32 x10 x10 K bracket x P bolt x22 height
More information8mm PrecisionPro (Green) DL Spliceable 7-13 Tape Feeder. T Rev. B hd This document supports assembly Rev. -
8mm PrecisionPro (Green) DL Spliceable Tape Feeder 8mm PrecisionPro (Green) DL Spliceable Tape Feeder 8mm PrecisionPro (Green) DL Spliceable Tape Feeder 8mm PrecisionPro (Green) DL Spliceable 7-13 Tape
More informationM2 Antenna Systems, Inc. Model No: 23CM35
M2 Antenna Systems, Inc. Model No: 23CM35 SPECIFICATIONS: Model... 23CM35 Frequency Range... 1250 To 1300 MHz *Gain... 20.94 dbi Front to back... 25 db Typical Beamwidth... E=17 H=18 Feed type... Folded
More informationHigh Head Close-Coupled Centrifugal Pumps
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationParts and Maintenance Manual for GL50 Spiral Mixer
Parts and Maintenance Manual for GL50 Spiral Mixer WARRANTY TERMS Validity: The warranty starts from the delivery date and lasts 2 months, if: The mixer was not damaged during transportation, and it was
More informationRevision 3.0 Parts List Salvador 1~, 3~
Revision 3.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data
More informationRevision 1.0 Parts List Salvador 1~, 3~
Revision.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded
More informationDLMP Installation Instructions
DLMP Installation Instructions Tools Needed Posidrive No.3 Screwdriver Large Flat Head Screwdriver 2x 10mm Spanner 1x 13mm Spanner Ø8mm Drill Ø6mm Drill Kit Contents [ ] 1x Tube 2.5M long 17420 [ ] 2 x
More information3M Distribution Box (DDB)
3M Distribution Box (DDB) Merged Copper and Fiber Pole/Post Mount Enclosure Installation Instructions November 2015 78-0015-2736-1-A 2 November 2015 78-0015-2736-1-A Contents 1.0 General 2.0 Enclosure
More informationOperation and Maintenance Guide Electric Needle Scalers
Operation and Maintenance Guide Electric Needle Scalers Models Covered Model Number ENS100V ENS200V Electric Needle Scaler, 110V-1ph Electric Needle Scaler, 220V-1ph Description IMPA Number 59 12 01 59
More informationRevision 2.0 Parts List Minette 1~, 3~
Revision.0 www.grindex.com Parts List 80.7 Minette ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3
More informationTurret Replacement Instruction Manual
Automatic Multi-Satellite TV Antenna Turret Replacement Instruction Manual for models RPSKLGL, RPSKSML, SK-LG00, SK-SM00, & RP-SWM For help, email help@winegard.com or call -800-788-7 568 Raising the Antenna
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: LPDA 200 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
More informationAccessories K6..-. / K9..-. / KC6..-. / KC9..-. ACCESSORIES INCLUDED OPTIONAL ACCESSORIES OTHER OPTIONAL ACCESSORIES
Accessories K6..-. / K9..-. / KC6..-. / KC9..-. ACCESSORIES INCLUDED COLLET COLLET CNOMO SERIES 200 1 CNOMO collet ø 6 mm 615 526 049 0 2 Series 200 resilient collet, ø 5.55 to 6.35 mm (1/4") 615 526 063
More informationI OPERATING PRECAUTIONS
I OPERATING PRECAUTIONS Please place the turntable on a horizontal support free of vibrations. For prevention of acoustical feedback, the speakers must be placed a sufficient distance from the turntable.
More informationBionic Elephant Trunk. Assembly Instructions
Bionic Elephant Trunk Assembly Instructions Equipment and Supplies Required items from the Bionics Kit and/or Materials Pack: 1. Tail fin (small) assembled 2 see Start Here for tail fin assembly instructions
More informationRW45 Motor Gearboxes:. Drive torques up to 120Nm at 50 Hz and 60 Hz mains frequencies;
RW45 Motor Gearboxes Motor gearboxes RW45 Motor Gearboxes The RW45 motor gearboxes are maintenance-free, compact power units for driving ventilation, screen and flap ventilation systems in greenhouses
More informationService Parts Diagrams. For Model: 10/20/09 Service Parts Diagrams for the Rear Projection SMART Board 3000i-DV Interactive Whiteboard 1
Service Parts Diagrams For Model: 000i-DV with the serial NEC MT060 numbers Serial greater numbers than 000 000i-DV-09000 to 0999 0/0/09 Service Parts Diagrams for the Rear Projection SMART Board 000i-DV
More informationRevision 2.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3 Exploded
More informationRevision 3.0 Parts List Minex 1~ Minex Lite, Minex 3~
Revision 3.0 www.grindex.com Parts List 80.60 Minex ~ 80.7 Minex Lite, Minex 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included...
More informationMedium Box for Cable Termination
FIST-MB2-T I N S T A L L A T I O N I N S T R U C T I O N Medium Box for Cable Termination Contents 1 Introduction 1.1 Product description. 2 General 2.1 Tools 2.2 Kit contents 3 Installation and pre assembling
More informationCambridge International Examinations Cambridge International General Certificate of Secondary Education
Cambridge International Examinations Cambridge International General Certificate of Secondary Education *5003676564* DESIGN AND TECHNOLOGY 0445/42 Paper 4 Systems and Control May/June 2015 1 hour Candidates
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: MOD 550 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
More informationDL-AR2 Technical Specifications Universal HDMI Adapter Ring Rev
DL-AR2 Technical Specifications Universal HDMI Adapter Ring Rev. 130814 The DL-AR2 Digital Adapter Keychain was developed to support the rising proliferation of mobile devices used in presentation systems.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PARTS REQUIRED Parts in the box Single monitor Dual monitor M2 M8 M/Flex + (package contents will depend on configuration ordered) Tools required for installation 6.0 mm Hex Key
More informationStep 1. 2x Kep Nut 1x Left Motor Assembly
Start with the build completed in Lesson 3 of the TETRIX Getting Started Guide. Steps 1 to 3 involve removing elements from the model. These elements will be reattached later. Parts to be Removed Step
More information3. Disassembly and Reassembly
3. Disassembly and Reassembly 3.1 General Precautions on Disassembly When you disassemble and reassemble components, you must use extreme caution. The close proximity of cables to moving parts makes proper
More informationHigh Performance (Gold Plus) Spliceable Tape Feeder Part Number: Part Number: Revision 3 Jun 2008 No.
8mm High Performance (Gold Plus) Spliceable Tape Feeder Part Number: 50934707 12mm High Performance (Gold Plus) Spliceable Tape Feeder Part Number: 50934807 Revision 3 Jun 2008 No. 0930D-E010 i Table
More information1-Touch Vibratory Sieve Shaker SS-10
1-Touch Vibratory Sieve Shaker SS-10 Safety Instructions WARNING!! This machine operates on electric current. Improper operation could result in electrical shock, electrocution, or an explosion! 1. ALWAYS
More informationIndustrial Monitor Update Kit
Industrial Monitor Update Kit (Bulletin Number 6157) Installation Instructions 2 Table of Contents Table of Contents Industrial Monitor Update Kit... 3 Overview... 3 Part 1 - Initial Preparation... 5 Part
More informationVITALink Taped Splice Straight Through Crimp
A Marmon Wire & Cable Berkshire Hathaway Company VITALink Taped Splice Straight Through Crimp 2 Hour Fire-Rated Splice VITALink MC Cables, UL FHIT 120 Installation Instructions Description The VITALink
More informationCOYOTE CLOSURE FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (15.24 cm x cm cm x cm)
OCTOBER 2004 COYOTE CLOSURE FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (15.24 cm x 55.88 cm 21.59 cm x 55.88 cm) Be sure to read and completely understand this procedure before applying
More informationInstruction manual. KUZMA 4POINT 14 inch TONEARM Serial Number:
Instruction manual KUZMA 4POINT 14 inch TONEARM Serial Number:.. 2016-09 1 KUZMA LTD INSTRUCTION MANUAL FOR 4POINT 14 tonearm The 4POINT 14 tonearm is a very precisely engineered piece of equipment, however,
More information3. Electronics and MMU2 unit assembly
Written By: Jakub Dolezal 2018 manual.prusa3d.com/ Page 1 of 34 Step 1 Tools necessary for this chapter Please prepare tools for this chapter: 2.5mm Allen key for M3 screws 2mm Allen key for nut alignment
More informationDesk Mount Articulating Dual Monitor Arm with Cable Management & Height Adjust
Desk Mount Articulating Dual Monitor Arm with Cable Management & Height Adjust ARMDUAL *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com
More informationE-TEXTILES STARTER PACK
LEARN HOW TO SEW A CIRCUIT WITH THIS E-TEXTILES STARTER PACK WHITE LEDs BLUE LEDs LARGE COIN CELL MINIATURE COIN CELL SEWABLE ELECTRONICS INTRODUCTION TO ELECTRO-FASHION Electro-Fashion is Kitronik's own
More information2178-L/S Series Fiber Optic Splice Case with Gasket
2178-L/S Series Fiber Optic Splice Case with Gasket Instructions for: 2178-S Splice Case 2178-LS Splice Case 2178-LL Splice Case 2181-LS Cable Addition Kit May 1997 34-7041-9949-5-A 1 Table of Contents
More informationManual placement system MPL3100. for BGA, CSP and Fine-Pitch components
Manual placement system MPL3100 for BGA, CSP and Fine-Pitch components Part No: MPL3100BA1.0e Issue Date: 02/2001 You have opted for an ESSEMTEC MPL3100 pick and place system. We thank you for this decision
More informationFlygt Handleiding voor installatie, bediening en onderhoud
Flygt 068 Handleiding voor installatie, bediening en onderhoud Table of Contents Table of Contents 1 Introduction... 1.1 Specially approved products... Product Description....1 The data plate.... Approvals...4.
More informationMay-June Caveat: Phonograph
-1341- Caveat: Phonograph [New York,] May 29, i8y8 la To all whom it may concern. Be it known that I, Thomas Alva Edison of Menlo Park in the State of New Jersey United States of America Electrician, have
More informationInstallation instructions, accessories. Subwoofer. Volvo Car Corporation Gothenburg, Sweden. Page 1 / 29
Installation instructions, accessories Instruction No 30752136 Version 1.1 Part. No. 30752135 Subwoofer Volvo Car Corporation Subwoofer- 30752136 - V1.1 Page 1 / 29 Equipment A0000162 A0000161 A0801178
More informationvelocity standard 07 velocity features and benefits: dimensions: additional information:
velocity standard 07 V-S-07 Chic and robust - a highly-structural portable 10 x10 exhibit that emphasizes your identity and message seamlessly with a combinaton of fabric graphics, rigid accents and accessories.
More informationCN Remove the scanner assembly (X476 and X576 models) and all doors/covers.
CN598-67045 www.hp.com/support IMPORTANT: Ensure the product firmware is upgraded to at least version 1336MR before performing this repair procedure. If the firmware upgrade cannot be completed, contact
More informationHCS - HES Cabling Systems
HCS - HES Cabling Systems Installation Manual for HCS High-Capacity Fiber-Optic Rack-Mount Cabinets Be sure to read and completely understand this procedure before applying product. Be sure to select the
More informationvelocity standard 08 velocity features and benefits: dimensions:
velocity standard 08 V-S-08 Chic and robust - a highly-structural portable 10 x20 exhibit that emphasizes your identity and message seamlessly with a combinaton of fabric graphics, rigid accents and accessories.
More informationSatellite Dish Installation Manual (Ver. 2) 1
Satellite Dish Installation Manual Provided by DiscoverNet, Inc. Satellite Dish Installation Manual (Ver. 2) 1 Table of Contents Section 1: Introduction Page 3 Section 2: Recommended Tools and Materials
More informationeasydelta BUILD MANUAL easydelta 3D printer design & documentation by Achatz Industries Haefland 8A 6441 PA Brunssum The Netherlands
easydelta BUILD MANUAL easydelta 3D printer design & documentation by Achatz Industries Haefland 8A 6441 PA Brunssum The Netherlands BUILD MANUAL Welcome to the 1. Edition Build Manual for your easydelta
More informationOrdering parts and supplies
Ordering parts and supplies Parts Order replacement parts from the following website: http://www.hp.com/ssg/parts/direct_order.html Related documentation and software Order documentation and software from
More informationHAXL-PNI-40 NEW DANA SERVICE KITS AND PARTS FOR MODELS BUILT ON OR AFTER JUNE 10, 2013 PART NUMBER INFORMATION DATE: August 15, 2013
HAXL-PNI-40 NEW DANA 170-190-590 SERVICE KITS AND PARTS FOR MODELS BUILT ON OR AFTER JUNE 10, 2013 PART NUMBER INFORMATION DATE: August 15, 2013 TO: All Dana Aftermarket Group Spicer Heavy Axle Customers
More informationFIST-MB2-S. FIST Medium Box for Cable Splicing Only. 4 Cable installation. 1 Introduction. Contents. 2 General. 5. Fiber routing to individual trays
FIST-MB2-S I N S T A L L A T I O N I N S T R U C T I O N FIST Medium Box for Cable Splicing Only Contents 1 Introduction 1.1 Product description 2 General 2.1 Tools 2.2 Kit contents 3 Installation and
More informationETKA : Model. Restrictions. Illustration. Year EPIS 198. et_bild.frm
7 7-0 0:00 2.02.200 et_bild.frm EPIS 8 7 7-0 0:00 2.02.200 Pos Part Number Description Remark Qty cable tie retaining plate for cable - 4F0 7 850 cable tie + N 020 02 2 cable tie 3,6246MM () + N 020 04
More information,
Page 39 Description Part Number List Price Section Three NuFlex Tubing Siphon Tubes Sprinkler Mainline Tubing Gated Accessories Vacuum PVC Underground Gates & Accessories 40 40 42, 46 43 4445 46 47 4849
More informationWINEGARD INSTALLATION MANUAL. Model GM Carryout Ladder Mount for mounting pipes with outer diameters between 1 to 1-1/8
WINEGARD INSTALLATION MANUAL Model GM-3000 Carryout Ladder Mount for mounting pipes with outer diameters between 1 to 1-1/8 WARNING: DO NOT USE THE LADDER MOUNT AS A STEP! NOT INTENDED FOR USE WITH THE
More informationGENUINE PARTS. SIRIUS Under Glass Antenna Kit
GENUINE PARTS SATELLITE RADIO INSTALLATION INSTRUCTIONS 1. DESCRIPTION: Satellite Radio System 2. APPLICATION: Pathfinder (2006-2007) 3. PART NUMBERS: XM Tuner Kit 999U9-AS005 SIRIUS Tuner Kit 999U9-AS006
More informationGrounding-type plugs and sockets K Product information
Product information Plugs and sockets for harsh conditions. SCHUO by MENNEES with the hammer symbol. Acc. to VDE 0105 part 115. Made of high-grade AMAPLAST. Acc. to VDE 0620 for harsh conditions. Application
More informationFlag System Drop Feeding
Flag System Drop Feeding Installation & Operator s Manual warranty installation parts list November 1997 MA1015C WARRANTY INFORMATION Chore-Time equipment warrants each new product manufactured by it to
More information