SPECIAL SPECIFICATION :1 Video (De) Mux with Data Channel
|
|
- Gertrude Skinner
- 5 years ago
- Views:
Transcription
1 1993 Specifications CSJ SPECIAL SPECIFICATION :1 Video (De) Mux with Data Channel 1. Description. This Item shall govern for furnishing and installing an 8 channel digital multiplexed video transmission system with two full duplex data channels designed to operate on single mode fiber optic cable. 2. General. A. Requirements. The 8 channel digital multiplexed video transmission system shall be designed to pass NTSC baseband video for up to 8 channels to a remote receiver over 1 single mode fiber. The baseband signal shall comply with RS250C medium haul standards. The output baseband signal must closely match the signal input to the system at the transmitter side. The data channels shall support simplex and full duplex operation in RS-232 or RS-422 format from DC to 230 kbps. B. Compatibility. In order to insure maximum similarity and compatibility, all components shall be a standard product line of the same manufacturer. C. Single Mode Fiber and Optical Budgets. The video transmission system shall operate on one single mode fiber. The equipment may operate at 1310 and/or 1550 nm wavelength(s). The transmission equipment must have an optical budget of at least 16 db, without the use of repeaters. The equipment shall monitor the rated performance over the entire dynamic range of the optical budget. D. Environment. All video transmission equipment shall operate in the temperature range of -40 F to F and a relative humidity of 0 to 95% non-condensing. The equipment shall be placed in a 19 in. rack shelf in the location indicated on the plans. The manufacturer must supply certification by an independent technical laboratory confirming that the equipment complies with these environmental specifications. E. Mechanical Dimensions. The stand alone multiplexer/demultiplexer unit shall not exceed 5 in. x 8 in. x 10 in. The rack mount multiplexer/demultiplexer units shall mount in a standard 19 in. equipment rack configuration where the total unit configuration does not exceed 12 rack units in height at maximum equipment buildout. The units shall be composed of a chassis or card cage designed to house individual modules including the power supply, video encoder cards, video decoder cards, singlemode optical transmitter, and singlemode optical receiver. With exception of the video encoder and decoder cards, all assemblies for the multiplexer/demultiplexer including but not limited to the chassis, power supply, optical receiver, and optical transmitter shall be sized to allow maximum system buildout. Filler plates shall be used for unoccupied slots in front and rear of the chassis
2 F. Electrical Power. All transmission equipment must operate on standard 120 VAC electrical service. The equipment shall operate over a voltage range of 105 to 125 volts AC at 60 HZ. The transmitter or receiver shall not exceed 10 watts in power consumption. G. Mounting. All components shall be configured for mounting as a stand alone or rack mount unit. All necessary hardware for each component shall be supplied with each assembly. H. Components. The 8 channel video transmission system consists of the following components: 1) NTSC 8 channel video multiplexer 2) NTSC 8 channel video demultiplexer The plans shall specify the exact quantities of each component required. All necessary interconnection cables and other components necessary to provide a fully operational system shall be provided. I. Signal to Noise Ratio. The video end to end signal to noise ratio of the 8-channel multiplexer shall not exceed 60 db at the maximum optical loss budget. J. Bandwidth. The bandwidth shall be DC to 6.5 MHZ per channel ± 3 db. K. Signal Characteristics. The video signal characteristics per E1A 170 are as follows: input/output impedance 75 ohms input/output voltage 1 v p-p NTSC video differential gain* less than 7.5% differential phase* less than 5 degrees crosstalk more or equal to 48 db The gain and phase specifications are at 10 to 90% average picture level. The data signal characteristics are as follows: Data Channels 2 Data Format Data rate Bit error rate Operating mode RS-232, RS-422 DC-230 kbps (NRZ) < 1 in maximum optical loss budget Simplex of Full Duplex 3. NTSC Video 8 Channel Video Multiplexer. This component (transmitter) translates up to 8 NTSC baseband video signals into a multiplexed video signal suitable for input into the video demultiplexer (receiver)
3 A. Input Ports. Sufficient input ports shall exist on the multiplexer to support the number of units required to satisfy the 8 channel requirement. The unit shall be supplied with the necessary interconnect cables to fully interface with the video sources. B. Fiber Optic, BNC and Data Connectors. The multiplexer (transmitter) shall include one FC connector for the primary transmission fiber. An FC patch cord shall be provided to link the transmitter to a fiber-optic patch panel. Eight BNC coaxial cables shall be supplied to connect between the multiplexer and the video sources. Terminal blocks with screw connections shall be provided for the data transmit and receive. C. Mechanical Requirements. The stand alone multiplexer unit shall not exceed 5 in. x 8 in. x 10 in. as discussed in Article 2.E of this Specification. The rack mount multiplexer units shall mount in a standard 19 in. equipment rack configuration where the total unit configuration does not exceed 12 rack units in height at maximum equipment buildout. The units shall be composed of a chassis or card cage designed to house individual modules including the power supply, video encoder cards, video decoder cards, singlemode optical transmitter, and singlemode optical receiver. With exception of the video encoder and decoder cards, all assemblies for the multiplexer including but not limited to the chassis, power supply, optical receiver, and optical transmitter shall be sized to allow maximum system buildout. Filler plates shall be used for unoccupied slots in front and rear of the chassis. 4. Channel Video Demultiplexer. The video demultiplexer is the counterpart to the video multiplexer defined in Section 3. The unit receives a multiplexed optical signal and converts it into an RS-170 electrical signal for the end equipment. A. Output Ports. Sufficient output ports shall exist on the demultiplexer to support the number of channels required to satisfy the 8 channel requirement. The unit shall be supplied with the necessary interconnect cables to fully connect to the video switcher unit and patch panels. B. Mechanical Requirements. The stand alone demultiplexer unit shall not exceed 5 in. x 8 in. x 10 in. as discussed in Article 2.E of this Specification. The rack mount demultiplexer units shall mount in a standard 19 in. equipment rack configuration where the total unit configuration does not exceed 12 rack units in height at maximum equipment buildout. The units shall be composed of a chassis or card cage designed to house individual modules including the power supply, video encoder cards, video decoder cards, singlemode optical transmitter, and singlemode optical receiver. With exception of the video encoder and decoder cards, all assemblies for the demultiplexer including but not limited to the chassis, power supply, optical receiver, and optical transmitter shall be sized to allow maximum system buildout. Filler plates shall be used for unoccupied slots in front and rear of the chassis. C. Power Requirements. The receiver shall include a separate AC power supply and line cord. Total power requirements shall not exceed 10 Watts at 115 VAC. D. Fiber Optic and BNC Connectors. The demultiplexer (receiver) shall include one FC connector for the primary reception fiber and 8 BNC connectors for the video output. An FC patch cord shall be provided to link the receiver to a fiber optic patch panel
4 Terminal blocks with screw connections shall be provided for the data transmit and receive. 5. Field Testing. In addition to requirements outlined in Article 2 of Special Specification, Testing, Training, Documentation, Final Acceptance and Warranty, the Multiplexer/Demultiplexer link shall be installed and tested from the field location to the El Paso City Hall and/or TxDOT TMC. The test shall consist of the following: A. Subsystem Test. The Contractor shall conduct a video transmission subsystem test. The test shall, as a minimum, demonstrate all video signal receptions in the control center location(s). A signal to noise ratio (SNR) test shall be conducted on all video links. Signal to noise ratio shall exceed 60 db for each of the 8 output channels at the City Hall and/or TxDOT TMC with a calibrated input signal at the field locations. If subsystem tests fail because of any component(s) in the subsystem, the particular component(s) shall be corrected or substituted with other component(s) and the tests shall be repeated. If a component has been modified as a result of the subsystem test failure, a report shall be prepared and delivered to the Engineer prior to re-testing. B. Data Performance Tests. Digital data performance testing shall include all tests necessary to ensure compliance with all of the requirements of EIA Standard 232. These tests shall, as a minimum, demonstrate data communications between each of the data channel unit in the control center and the corresponding data channel unit in the field. Using a loopback plug at each EIA-232 channel terminating at a field location, a 24 hour bit error rate test (BERT) for each channel shall be conducted using a data communications test set in the control center. This BERT is used to determine the bit error rate (BER) through the system and terminating equipment at each end, and to certify that the EIA-232 channels can operate at a sustained rate of 9600 bits/sec (bps) for a 24 hour period. The 511-bit CCITT standard pseudo-random pattern shall be used for testing. The bit error rate (BER) measured at 9600 bps shall not exceed 10 to the minus 9 power and the error free seconds (EFS) shall be better than 99.98%. If this BER is exceeded on any channel, the problem shall be corrected and the entire BERT shall be completely restarted from the beginning, as if no previous BERT had been conducted. If a component has been modified as a result of the subsystem test failure, a report shall be prepared and delivered to the Engineer prior to retesting. Procedures for the acceptance test (system integration test) shall be submitted to the Engineer 60 days prior to implementation of the 90 day acceptance test period. 6. Training. Prior to the acceptance of the first unit of each type, training shall be provided for the Department's engineering, maintenance and operations staff, at a facility provided by the Department in accordance with Article 3 of Special Specification, Testing, Training, Documentation, Final Acceptance and Warranty. The training shall include all materials and manuals required for each participant. The training shall be provided for a minimum of 4 hours for at least 10 engineering and operations personnel. The training shall include a complete demonstration of the operation and capabilities of the equipment. This session should include a complete review of any
5 field adjustments or calibration of the transmission equipment which may be necessary for optimum performance and should stress day-to-day operation and isolation of problems down to the unit level. Procedures shall be discussed for identifying a faulty module in the field, as opposed to board level repairs. 7. Instructions and Guarantees. The supplier shall furnish any and all equipment necessary for safe and reliable field operation of the multiplexer/demultiplexers part of the quoted price for the specified equipment. All components furnished under this specification must be current production equipment and of recent manufacturer. Any repairs made by a manufacturer or representative shall be documented and returned with units when warranty repaired. This documentation shall include an explanation of the exact repairs made and identification of parts replaced by part number and circuit number. All warranty repairs must be completed within 10 days of delivery of the equipment to the designated repair depot. 8. Submittal Requirements. Six sets of submittal data, i.e., cut sheets (data sheets) for the equipment and software, shall be submitted to the Engineer for review and approval recommendations. 9. Documentation. In addition to requirements outlined in Article 4 of Special Specification, Testing, Training, Documentation, Final Acceptance and Warranty, 6 sets of complete schematics and operating manuals (theory of operation) and maintenance manuals of each component shall be supplied with system furnished. The maintenance manuals shall include complete sub-component parts listing and diagnostics procedures. 10. Measurement. The 8:1 Video (DE) Mux with data units will be measured by the each unit of the types specified, with interface electronics, installed and tested in accordance with the specifications. The chassis rack unit will be measured by the each unit of the types specified, with interface electronics, installed and tested in accordance with the specifications. 11. Payment. The work performed and materials furnished in accordance with this Item and measured as provided under Measurement will be paid for at unit price bid for 8:1 Video (DE) Mux w/data Transmitter (Stand Alone), 8:1 Video (DE) Mux w/data Receiver (Stand Alone), 8:1 Video (DE) Mux w/data (Transmitter and Receiver) (Stand Alone) 8:1 Video (DE) Mux w/data Transmitter (Rack Mount), 8:1 Video (DE) Mux w/data Receiver (Rack Mount) and 8:1 Video (DE) Mux w/data (Transmitter and Receiver) (Rack Mount), Chassis Rack (8 slot), Chassis Rack (12 slot) and 8:1 Video (De) Mux w/data (Transceiver) (Rack Mount). This price shall be full compensation for all materials and equipment furnished, installed, made fully operational and tested, including all cables and connectors, labor, training, documentation, and tools necessary to complete the work
SPECIAL SPECIFICATION 6735 Video Optical Transceiver
2004 Specifications CSJ 0924-06-244 SPECIAL SPECIFICATION 6735 Video Optical Transceiver 1. Description. This Item governs the furnishing and installation of Video optical transceiver (VOTR) in field location(s)
More informationSPECIAL SPECIFICATION 1291 Fiber Optic Video Data Transmission Equipment
1993 Specifications CSJ 0500-01-117 SPECIAL SPECIFICATION 1291 Fiber Optic Video Data Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation of Fiber Optic Video
More informationSPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment
2004 Specifications CSJ 3256-02-079 & 3256-03-082 SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment 1. Description. Furnish and install Fiber Optic Video Data Transmission Equipment
More informationSPECIAL SPECIFICATION 1987 Single Mode Fiber Optic Video Transmission Equipment
1993 Specifications CSJ 0027-12-086, etc. SPECIAL SPECIFICATION 1987 Single Mode Fiber Optic Video Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation of color
More information1995 Metric CSJ SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT
1995 Metric CSJ 0508-01-258 SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT 1.0 Description This Item shall govern for the furnishing and installation of color Single
More informationSECTION 683 VIDEO OPTICAL TRANSCEIVER WITH BI-DIRECTIONAL DATA CHANNEL DESCRIPTION
683 SECTION 683 VIDEO OPTICAL TRANSCEIVER WITH BI-DIRECTIONAL DATA CHANNEL DESCRIPTION 683.01.01 GENERAL A. The Contractor shall furnish the designated quantity of Video Optical Transceiver (VOTR) pairs
More informationINSTALLATION MANUAL FT-FOTR-8VD-ST-S. 8-Channel Digital Duplex Baseband Video Transmitter and Receiver With Reverse Data Transmission for PTZ Cameras
INSTALLATION MANUAL FT-FOTR-8VD-ST-S 8-Channel Digital Duplex Baseband Transmitter and Receiver With Reverse Transmission for PTZ Cameras v1.0 4/5/11 1 PACKAGE CONTENTS This package contains: One each
More informationINSTALLATION MANUAL FT-FOTR-1VDE-ST-S
INSTALLATION MANUAL FT-FOTR-1VDE-ST-S 1-Channel Digital Duplex Baseband Video Transmitter and Receiver With Reverse Data Transmission & Ethernet Transmission v1.0 4/5/11 1 PACKAGE CONTENTS This package
More information1993 Specifications CSJ , etc. SPECIAL SPECIFICATION ITEM CCTV Central Equipment
1993 Specifications CSJ 0922-33-042, etc. SPECIAL SPECIFICATION ITEM 8549 CCTV Central Equipment 1. Description. This Item shall govern for the furnishing and installation of closed circuit television
More informationMAXCOM PRODUCT SPECIFICATIONS FIBER OPTIC VIDEO / AUDIO / ASI LINK. Model MX3257HD. Description. Features. Model Selection Guide
MAXCOM PRODUCT SPECIFICATIONS FIBER OPTIC VIDEO / AUDIO / ASI LINK Model MX3257HD Description The rack-mountable MX3257HD fiber optic video multiplexer is ideal for transmitting 1 channel of video, 2 channels
More informationSECTION 686 VIDEO DECODER DESCRIPTION
686 SECTION 686 VIDEO DECODER DESCRIPTION 686.01.01 GENERAL A. This specification describes the functional, performance, environmental, submittal, documentation, and warranty requirements, as well as the
More informationSPECIAL SPECIFICATION 6612 T1 Discrete Cosine Transform (DCT) Color Video Compression System
1993 Specifications Fort Worth District SPECIAL SPECIFICATION 6612 T1 Discrete Cosine Transform (DCT) Color Video Compression System 1. DESCRIPTION. THIS ITEM SHALL REGULATE THE FURNISHING AND INSTALLATION
More informationDVM-3000 Series 12 Bit DIGITAL VIDEO, AUDIO and 8 CHANNEL BI-DIRECTIONAL DATA FIBER OPTIC MULTIPLEXER for SURVEILLANCE and TRANSPORTATION
DVM-3000 Series 12 Bit DIGITAL VIDEO, AUDIO and 8 CHANNEL BI-DIRECTIONAL FIBER OPTIC MULTIPLEXER for SURVEILLANCE and TRANSPORTATION Exceeds RS-250C Short-haul and Broadcast Video specifications. 12 Bit
More informationAnalog HD video over fiber converters for smart HD CCTV
Our AHD Video over Fiber Converters can simultaneously transmit 1-16 channels AHD over one multimode or single-mode optical fiber. Electronic and optical adjustments are never required. LED indicators
More information4 Channel Video over Fiber With Ethernet
4 Channel Video over Fiber With Ethernet Fiber Optic Converters MX 3260 MDR Electronics www.mdrelectronics.com Table of contents 1. Introduction 3 2. Image 4 3. Specifications 5 4. Connection Diagram 6
More informationSPECIAL SPECIFICATION 6713 Ethernet Video Decoder (MPEG-4)
2004 Specifications CSJ 0016-04-103, etc. SPECIAL SPECIFICATION 6713 Ethernet Video Decoder (MPEG-4) 1. Description. Furnish, install, and make fully operational with the TransGuide or Combined Transportation,
More informationVersiVision. FVTMHA0xA / FVRMHA0xA 16-CHANNEL DIGITALLY ENCODED VIDEO 1-CHANNEL BI-DIRECTIONAL DATA MULTIPLEXER USER S MANUAL.
VersiVision FVTMHA0xA / FVRMHA0xA 16-CHANNEL DIGITALLY ENCODED VIDEO 1-CHANNEL BI-DIRECTIONAL DATA MULTIPLEXER USER S MANUAL Revision B April 2013 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702
More informationFiberLink 7142 Series
MANUAL FiberLink 7142 Series 4 Channels of Composite Video and 8 Channels of Audio over one single mode or multimode fiber Installation and Operations Manual WWW.ARTEL.COM FibeLink 7142 Series Contents
More informationVideo Digital Optical Converter
Video Digital Optical Converter Model : W-VD1 AD Model : W-VD2 AD Model : W-VD4 AD Model : W-VD8 AD Video Digital Optical Converter adopt the advanced international digital video and optical fiber transmission
More informationOPERATOR MANUAL OSD351 FIBRE OPTIC CCTV TRANSMITTER CARD
OPERATOR MANUAL OSD351 FIBRE OPTIC CCTV TRANSMITTER CARD OSD351 FIBRE OPTIC CCTV TRANSMITTER CARD Document No:10103701 PAGE 2 C O N T E N T S 1. TECHNICAL SUMMARY...4 1.1 BRIEF DESCRIPTION...4 1.2 TECHNICAL
More informationVersiVision. FVTM4BCxA-CE / FVRM4BCxA-CE MULTIPLEXER SYSTEM 4-CHANNELS DIGITALLY ENCODED VIDEO 2-CHANNELS BI-DIRECTIONAL DATA
VersiVision FVTM4BCxA-CE / FVRM4BCxA-CE MULTIPLEXER SYSTEM 4-CHANNELS DIGITALLY ENCODED VIDEO 2-CHANNELS BI-DIRECTIONAL DATA 4-CHANNELS BI-DIRECTIONAL AUDIO 4-CHANNELS BI-DIRECTIONAL CONTACT CLOSURE 1-CHANNEL
More informationMULTIDYNE INNOVATIONS IN TELEVISION TESTING & DISTRIBUTION DIGITAL VIDEO, AUDIO & DATA FIBER OPTIC MULTIPLEXER TRANSPORT SYSTEM
MULTIDYNE INNOVATIONS IN TELEVISION TESTING & DISTRIBUTION INSTRUCTION MANUAL DVM-1000 DIGITAL VIDEO, AUDIO & DATA FIBER OPTIC MULTIPLEXER TRANSPORT SYSTEM MULTIDYNE Electronics, Inc. Innovations in Television
More informationOPERATOR MANUAL OSD8865 DIGITAL TRIPLE VIDEO FIBER OPTIC RECEIVER
OPERATOR MANUAL OSD8865 DIGITAL TRIPLE VIDEO FIBER OPTIC RECEIVER INDEX 1 1 TECHNICAL SUMMARY... 4 1.1 BRIEF DESCRIPTION... 4 1.1.1 OVERVIEW... 4 1.1.2 APPLICATIONS... 4 1.1.3 FEATURES AND BENEFITS...
More informationLTC 46xx and LTC 47xx Series Fiber Optic Transmission Units
CCTV LTC 46xx and LTC 47xx Series Fiber Optic Transmission Units LTC 46xx and LTC 47xx Series Fiber Optic Transmission Units Video and data models available No adjustments required Long distance high security
More informationVersiVision. FVTM2BBxA / FVRM2BBxA 2-CHANNELS DIGITALLY ENCODED VIDEO 2-CHANNELS BI-DIRECTIONAL DATA 2-CHANNELS BI-DIRECTIONAL AUDIO
VersiVision FVTM2BBxA / FVRM2BBxA 2-CHANNELS DIGITALLY ENCODED VIDEO 2-CHANNELS BI-DIRECTIONAL DATA 2-CHANNELS BI-DIRECTIONAL AUDIO TRANSMITTER / RECEIVER MULTIPLEXERS USER S MANUAL Revision B April 2013
More informationOPERATOR MANUAL OSD390 SERIES 4 CHANNEL VIDEO/AUDIO/DATA FIBER OPTIC TRANSMISSION SYSTEM
PTY. LTD A.B.N. 83 003 020 504 OPERATOR MANUAL OSD390 SERIES 4 CHANNEL VIDEO/AUDIO/DATA FIBER OPTIC TRANSMISSION SYSTEM OSD390 SERIES 4 CHANNEL VIDEO/AUDIO/DATA FIBER OPTIC TRANSMISSION SYSTEM Document
More informationLTC 4600 and 4700 Series Fiber Optics
CCTV LTC 4600 and 4700 Series Fiber Optics LTC 4600 and 4700 Series Fiber Optics Video and data models available No adjustments required Long distance high security Surface-mount or rack-mount units Video
More informationSPECIAL SPECIFICATION 2344 TMC Support Equipment
2004 Specifications CSJ 0912-00-488 SPECIAL SPECIFICATION 2344 TMC Support Equipment 1. Description. Furnish Traffic Management Center (TMC) support equipment in the City of Missouri City TMC location
More informationMODEL NUMBER SRP-X700P
BID SPECIFICATION FOR POWERED MIXER / SWITCHER MODEL NUMBER SRP-X700P INSTRUCTIONS: REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO
More informationSPECIAL SPECIFICATION 6686 BSIF CCTV Central Equipment
2004 Specifications CSJ 0922-00-025, 0921-02-173 & 0921-06-208 SPECIAL SPECIFICATION 6686 BSIF CCTV Central Equipment 1. Description. Furnish and install closed circuit television (CCTV) central equipment
More informationOPERATOR MANUAL OSD553 TRIPLE VIDEO FIBRE OPTIC RECEIVER
OPERATOR MANUAL OSD553 TRIPLE VIDEO FIBRE OPTIC RECEIVER OSD553 TRIPLE VIDEO FIBRE OPTIC RECEIVER Document No: 101035 Revision 02 PAGE 2 C O N T E N T S 1. TECHNICAL SUMMARY... 4 1.1 BRIEF DESCRIPTION...
More informationSPECIAL SPECIFICATION 1118 Dual OC-3 ATM MPEG-2 Encoder
1993 Specifications CSJ 0521-04-190 SPECIAL SPECIFICATION 1118 Dual OC-3 ATM MPEG-2 Encoder 1. Description. Furnish, install, and make fully operational an Asynchronous Transfer Mode (ATM) Video Encoder
More informationHONEYWELL VIDEO SYSTEMS HIGH-RESOLUTION COLOR DOME CAMERA
Section 00000 SECURITY ACCESS AND SURVEILLANCE HONEYWELL VIDEO SYSTEMS HIGH-RESOLUTION COLOR DOME CAMERA PART 1 GENERAL 1.01 SUMMARY The intent of this document is to specify the minimum criteria for the
More informationInstruction Manual RT-91600D-SL RR-91600D-SL Sixteen Channel Video Multiplexer With Remote Diagnostic Interface
Instruction Manual RT-91600D-SL RR-91600D-SL Sixteen Channel Video Multiplexer With Remote Diagnostic Interface Copyright 2005, American Fibertek, Inc. 0804JD Table of Contents Functional Description...
More informationSONy BID SPECIFICATION FOR POWERED MIXER MODEL NUMBER SRP-X500P
SONy BID SPECIFICATION FOR POWERED MIXER MODEL NUMBER SRP-X500P INSTRUCTIONS: REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO ASSIST
More informationNational Park Service Photo. Utah 400 Series 1. Digital Routing Switcher.
National Park Service Photo Utah 400 Series 1 Digital Routing Switcher Utah Scientific has been involved in the design and manufacture of routing switchers for audio and video signals for over thirty years.
More information1995 METRIC CSJ SPECIAL SPECIFICATION ITEM 6573 CCTV CENTRAL EQUIPMENT
1995 METRIC CSJ 0196-03-209 SPECIAL SPECIFICATION ITEM 6573 CCTV CENTRAL EQUIPMENT 1.0 DESCRIPTION. THIS ITEM SHALL GOVERN FOR THE FURNISHING AND INSTALLATION OF CLOSED CIRCUIT TELEVISION (CCTV) CENTRAL
More informationDVBus and Multiplexer and demultiplexer assemblies for video channels, with bidirectional audio and data USER MANUAL
DVBus 8350-16 and 8350-4 Multiplexer and demultiplexer assemblies for 16-4 video channels, with bidirectional audio and data USER MANUAL 1. Description. Indicators and system connections DVBus 8350 systems
More informationGE Interlogix Fiber Options S700V & S702V. Instruction Manual FIBER-OPTIC VIDEO TRANSMISSION SYSTEM
g GE Interlogix Fiber Options Instruction Manual S700V & S702V FIBER-OPTIC VIDEO TRANSMISSION SYSTEM Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment
More informationMULTIDYNE Electronics, Inc. Innovations in Television Testing & distribution
INSTRUCTION MANUAL DVM-2200 DIGITAL VIDEO, AUDIO & DATA FIBER OPTIC MULTIPLEXER TRANSPORT SYSTEM MULTIDYNE Electronics, Inc. Innovations in Television Testing & distribution 1-(800)-4TV-TEST, 1-(800)-488-8378
More informationSPECIAL SPECIFICATION 6734 CCTV Central Equipment
1995 Metric CSJ 0038-01-033, Etc. SPECIAL SPECIFICATION 6734 CCTV Central Equipment 1. Description. This Item shall govern for the furnishing and installation of Closed Circuit Television (CCTV) central
More informationMX/HD-SDI-3G. Transmit HD-SDI-3G signals over Fiber
MX/HD-SDI-3G Transmit HD-SDI-3G signals over Fiber Key Features Transmit ASI or SDI signal over one single-mode Fiber Support data rate from 19.4Mb/s to 3Gb/s SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE
More informationSPECIAL SPECIFICATION 8494 CCTV Central Equipment
2004 Specifications CSJ 0912-34-150 SPECIAL SPECIFICATION 8494 CCTV Central Equipment 1. Description. Furnish and install closed circuit television (CCTV) central equipment in the City of Missouri City
More informationFiber Optic Transmission Systems
TM Fiber Optic Transmission Systems SHORT FORM CATALOG For cost-effective, interference-free transmission of analog and digital signals by means of modern optical technology. Since 1977 the people of Liteway
More informationModel /29S RF Splitter
Instruction Manual Model 1584-29/29S RF Splitter March 2013, Rev. 0 LNB VOLTAGE A B MODEL 1584 COMBINER CROSS TECHNOLOGIES INC. GND+DC ON Data, drawings, and other material contained herein are proprietary
More information4 Channel Video and IP Over Fiber Extender Kit with RS485 Data. User Manual L-4VID-1IP-FE-TX-RX
4 Channel Video and IP Over Fiber Extender Kit with RS485 Data User Manual L-4VID-1IP-FE-TX-RX Application Drawing Description The 4 Channel Video + 1-ch reverse Data +10/100M Ethernet optical transceiver
More informationSPECIAL SPECIFICATION 1676 Traffic Management Center Electronics
1993 Specifications CSJ s 0912-34-101 & 0027-08-108, etc. SPECIAL SPECIFICATION 1676 Traffic Management Center Electronics 1. Description. Furnish and install electronics equipment in the Traffic Management
More informationECT5484. Fiber Optic Digital Video, Audio & Data Multiplexer/Demultiplexer. Single Fiber Operation. Specifications
Specifications Optical Performance Fiber Type Multimode Singlemode Optical Core Diameter 0µ or.µ /0µ Operating Wavelength 0 nm 0/0 nm Optical Power Source Laser (VCSEL) Laser Optical Power Output - dbm
More informationCamera Control Unit 55D-BS VOLUME OPEN CABLE MIC OFF GND 2W CAMERA CABLE TALLY. Camera Adapter 55D-CA 9.39" 7.40" 5.2"
The Telemetrics Coax/Fiber Link is an affordable camera control system with increased operating distance. Using frequency multiplexing the following signals are transmitted over a single coaxial cable:
More informationTETRA 42x0. 1. General description. Four Channel Digital Video Multiplexer with Two-Way Data USER MANUAL
TETRA 42x0 Four Channel Digital Video Multiplexer with Two-Way Data USER MANUAL 1. General description TETRA 42x0 (4210 for multimode, and 4250 for singlemode) digital-optical multiplexer/demultiplexer
More informationIRT Eurocard. Type RWA RF Distribution Amplifier for 70 MHz IF signals
I R T Electronics Pty Ltd A.B.N. 5 000 8 575 6 Hotham Parade, ARTARMON N.S.W. 064 AUSTRALIA National: Phone: (0) 949 744 Fax: (0) 949 749 International: +6 949 744 +6 949 749 Email: sales@irtelectronics.com
More informationFeatures. CPU Version. Non-CPU Version
Features CPU Version Non-CPU Version Up to E or T links on one fiber Optical + protection 0/00 BaseT Ethernet Bridge mode, maximum transmission bandwidth 22Mbps (optional) One V.35, X.2, RS9/V.36, RS232/V.28,
More informationMODEL NUMBER PVM-20L5
BID SPECIFICATION FOR PRODUCTION CRT MONITORS MODEL NUMBER PVM-20L5 INSTRUCTIONS: REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO ASSIST
More informationDINTEK LAN Cabling Systems
CCTV over UTP Solution Benefits of structured UTP cabling include: Better interference rejection than coax UTP is less expensive than dedicated coax or fiber Color-coded cabling Unlimited bend radius Physically
More informationEthernet Media Converters
Allied Telesyn AT-MC13, AT-MC14, AT-MC15 and AT-MC16 Media Converters Seite 1 von 5 AT-MC13 Media Converter UTP to Fiber "ST" AT-MC14 Media Converter UTP to Fiber "SC" AT-MC15 Media Converter UTP to BNC
More informationINSTRUCTION MANUAL FOR MODEL IOC534 LOW LATENCY FIBER OPTIC TRANSMIT / RECEIVE MODULE
210 South Third Street North Wales, PA USA 19454 (T) 215-699-2060 (F) 215-699-2061 INSTRUCTION MANUAL FOR LOW LATENCY FIBER OPTIC TRANSMIT / RECEIVE MODULE i TO THE CUSTOMER Thank you for purchasing this
More informationCisco DAXI. Features. Data Sheet. Cisco DAXI. Figure 1.
Cisco DAXI The Cisco DSAN Auxiliary Input Box (DAXI) is a compatible external product that converts up to four analog video channels to digital format for distribution via the Digital Service Access Node
More informationAES-404 Digital Audio Switcher/DA/Digital to Analog Converter
Broadcast Devices, Inc. AES-404 Digital Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide Web: www.broadcast-devices.com
More informationB. The specified product shall be manufactured by a firm whose quality system is in compliance with the I.S./ISO 9001/EN 29001, QUALITY SYSTEM.
VideoJet 8000 8-Channel, MPEG-2 Encoder ARCHITECTURAL AND ENGINEERING SPECIFICATION Section 282313 Closed Circuit Video Surveillance Systems PART 2 PRODUCTS 2.01 MANUFACTURER A. Bosch Security Systems
More informationFibre Optic Modem ODW-611
Fibre Optic Modem ODW-611 PROFIBUS DP to fibre optic link, point-to-point applications The ODW-611 is a fibre optic modem designed for point-to-point fibre optic connections between PROFI- BUS DP networks.
More informationI N S T R U C T I O N D A T A
I N S T R U C T I O N D A T A RFL (C37.94) Fiber Service Unit Single Mode 108015-1 RS-449 108015-2 V.35 108015-3 G.703 108015-4 X.21 108015-5 E1 Multimode 107460-1 RS-449 107460-2 V.35 107460-3 G.703 107460-4
More information500 Business Center Drive Pittsburgh, PA USA CAGE 1BGJ7. June 2015 Part Numbers FIBER DRIVER
Market Central www.secureswitch.com 500 Business Center Drive Pittsburgh, PA 15205 USA 412.494.2800 CAGE 1BGJ7 June 2015 Part Numbers Fiber Driver ST Female (Lead Free) 61-00091 Fiber Driver - ST - Female
More informationCisco Prisma II 1310 nm, High-Density Transmitter and Host Module for 1.2 GHz Operation
Data Sheet Cisco Prisma II 1310 nm, High-Density Transmitter and Host Module for 1.2 GHz Operation Description The Cisco Prisma II line of optical network transmission products is an advanced system designed
More informationI/A Series Hardware Fiber Optic LAN Converter
I/A Series Hardware PSS 21H-7F3 B4 The provides bidirectional conversion between coaxial and fiber optic media. The converter is compatible with existing I/A Series system hardware, utilizes industry standard
More informationACTIVE IF SPLITTER/COMBINER UHP-IFS
ACTIVE IF SPLITTER/COMBINER UHP-IFS GENERAL DESCRIPTION AND INSTALLATION GUIDE DOCUMENT RELEASE 2 [UHP.IFS.2.EN] JUNE 2016 CONTENT Acronyms and Abbreviations... 4 Introduction... 5 Required level of qualification...
More informationOne channel video link With duplex data and contact closure
User Manual One channel video link With duplex data and contact closure CFO First Mile series consist of fi bre optic modems which provide a high quality and losless video transmission for variety of CCTV
More informationInstruction Manual Model # Block Upconverter
Instruction Manual Model 2115-278# Block Upconverter August 2018, Rev. A MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
More informationE3/DS3 Fibre Extender
User Manual E3/DS3 Fibre Extender Black Box Network Services 464 Basingstoke Road, Reading, Berkshire, RG2 0BG Tech: 0118 965 6000 www.blackbox.co.uk CONTENTS 1 Introduction 1 1.1 About the products 1
More informationI R T Electronics Pty Ltd A.B.N. 35 000 832 575 26 Hotham Parade, ARTARMON N.S.W. 2064 AUSTRALIA National: Phone: (02) 9439 3744 Fax: (02) 9439 7439 International: +61 2 9439 3744 +61 2 9439 7439 Email:
More informationOTFOA-25XX SERIES ERBIUM-DOPED FIBER AMPLIFIER (EDFA)
OTFOA-25XX SERIES ERBIUM-DOPED FIBER AMPLIFIER (EDFA) With Mid-stage Access Operating Manual TEL: (209) 586-1022 USA: (800) 545-1022 FAX: (209) 586-1026 E-Mail: salessupport@olsontech.com www.olsontech.com
More informationLong Reach, Client-Side SFP, Multi-Rate, Multi-Protocol, CWDM, 3R Transponder WaveReady Transponder 740 LR CWDM
COMMUNICATIONS MODULES & SUBSYSTEMS Long Reach, Client-Side SFP, Multi-Rate, Multi-Protocol, CWDM, 3R Transponder WaveReady Transponder 740 LR CWDM Key Features Client-side SFP modules support either single-mode
More informationHD/SD-SDI Over Fiber Transmitter and Receiver Extender Kit. User Manual L-1SDI-SFE-TX/RX
HD/SD-SDI Over Fiber Transmitter and Receiver Extender Kit User Manual L-1SDI-SFE-TX/RX Table of Contents Table of Contents---------------------------------------------------------------------------------1
More informationBILOXI PUBLIC SCHOOL DISTRICT. Biloxi Junior High School
BILOXI PUBLIC SCHOOL DISTRICT Biloxi Junior High School Request for Proposals E-Rate 2014-2015 - Internal Connections Submit Proposals To: Purchasing Department Attn: Traci Barnett 160 St. Peter Street
More informationFibre Optic Modem ODW-622
Fibre Optic Modem ODW-622 RS-232 to fibre optic link, redundant ring or multidrop applications The ODW-622 can be used to create either redundant ring or multidrop solutions for devices with RS-232 interfaces.
More informationAES-402 Automatic Digital Audio Switcher/DA/Digital to Analog Converter
Broadcast Devices, Inc. AES-402 Automatic Digital Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide Web:
More informationMulticom Optical Return Path Receiver MUL HRPR 4B
Multicom Optical Return Path Receiver User Manual v.9 www.multicominc.com 800 423 2594 407 331 7779 1076 Florida Central Parkway, Longwood, FL 32750 SAFETY NOTIFICATION Multicom strongly advises you to
More informationTruck router (3Gbps/HD/SD/ASI)
NVISION 8288 Truck router (3Gbps/HD/SD/ASI) The ultra-compact NVISION 8288 truck video routers are the world s smallest large routers with full broadcast quality, resilience and advanced control systems.
More informationBID SPECIFICATION FOR PRODUCTION CRT MONITORS
BID SPECIFICATION FOR PRODUCTION CRT MONITORS MODEL NUMBER PVM-136 INSTRUCTIONS: REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO ASSIST
More informationOPTICAL DISTRIBUTION STATION -
optical distribution station is a high performance, four individual outputs node. With high output levels and performance to 862MHz, it provides an ideal platform for support of the evolving technologies
More information1:1 and 1:2 Redundant Low-Noise Ka-Band Block Converter Systems
R Back to Block/Fixed Tuned Converters 1:1 and 1:2 Redundant Low-Noise Ka-Band Block Converter Systems 1:1 1:1 AND 1:2 REDUNDANT LOW- NOISE Ka-BAND BLOCK CONVERTER SYSTEMS Specifications Options 1:1 Diagram
More informationOmniStar GX2 Headend Optics Platform
arris.com OmniStar GX2 Headend Optics Platform GX2 RX200BX4 Quad Return Path Receiver FEATURES Very high module density allowing up to 16 quad receiver modules in a housing to provide 64 independent optical
More informationTable of Contents. Headend Optical Transport OmniStar Enhanced DFB Laser [AM-OMNI-ALM-*] file:////ncs-server-xp/temp/motorola CD 2001/frames.
Table of Contents Headend Optical Transport OmniStar Enhanced DFB Laser [AM-OMNI-*] file:////ncs-server-xp/temp/motorola CD 2001/frames.htm (1 of 5) [7/8/2009 8:23:40 AM] FEATURES 870 MHz passband: up
More informationFiberLink 3350 Series
MANUAL FiberLink 3350 Series 3G/HD/SD-SDI Transmission over one single mode or multimode fiber Installation and Operations Manual WWW.ARTEL.COM Contents Contents Welcome....3 Features....3 Package Contents....3
More informationIndustriefunkuhren. Technical Manual. Model 7248/7248RC. Fibre Optic Converter Board ENGLISH
Industriefunkuhren Technical Manual Fibre Optic Converter Board Model 7248/7248RC ENGLISH Version: 01.00-04.05.2007 2 / 16 7248/7248RC Fiber Optic Converter Board - V01.00 INPORTANT NOTES Downloading Technical
More informationPSI-MOS-RS232/FO 850 E Serial to Fiber Converter
PSI-MOS-RS232/FO 850 E Serial to Fiber Converter perle.com/products/serial-fiber-converters/psi-mos-rs232-fo850e-rs232-to-fiber.shtml Connect RS232 devices to fiber optic cable Extend serial data up to
More informationA. All equipment and materials used shall be standard components that are regularly manufactured and used in the manufacturer s system.
ENDURA NET5308T VIDEO ENCODER TECHNICAL SPECIFICATIONS SECURITY SYSTEM DIVISION 28 ELECTRONIC SAFETY AND SECURITY LEVEL 1 28 20 00 ELECTRONIC SURVEILLANCE LEVEL 2 28 23 00 VIDEO SURVEILLANCE LEVEL 3 28
More informationHeadend Optics Platform (CH3000)
arris.com Headend Optics Platform (CH3000) HT3540H Series Double-Density Full Spectrum DWDM Transmitter System FEATURES DWDM transmitter: up to 40 wavelengths on ITU grid Hot plug in/out, individually
More informationR e c e i v e r. Receiver
R e c e i v e r Receiver > Eight channels > Eight configurable inputs > Three independent zones > Integrated 7-channel amplifier with massive toroidal transformer and thermal/dc protection > AM/FM tuner
More informationExtended Reach, Client-Side SFP, Multi-Rate, Multi-Protocol, DWDM, 3R Transponder WaveReady Transponder 740 XLR
COMMUNICATIONS MODULES & SUBSYSTEMS Extended Reach, Client-Side SFP, Multi-Rate, Multi-Protocol, DWDM, 3R Transponder WaveReady Transponder 740 XLR Key Features Client-side SFP modules support either single-mode
More informationCisco 10GBASE Dense Wavelength-Division Multiplexing SFP+ Modules
Data Sheet Cisco 10GBASE Dense Wavelength-Division Multiplexing SFP+ Modules Use Dense Wavelength-Division Multiplexing (DWDM) SFP+ modules to integrate WDM transport directly into your Cisco 10 Gigabit
More informationUSER MANUAL. MODEL 460RC Rack-Mounted G.703 Coax to Twisted Pair Adapters (BALUNs)
USER MANUAL MODEL 460RC Rack-Mounted G.70 Coax to Twisted Pair Adapters (BALUNs) An ISO-900 Certified Company Part # 07M460RC-A Doc. #0908UA Revised //98 SALES OFFICE (0) 975-000 TECHNICAL SUPPORT (0)
More informationVM-100R. 1 RU HEIGHT PROGRAMMABLE 70 AND 140 MHz HIGH-PERFORMANCE VIDEO/AUDIO MODULATOR
VM-100R 1 RU HEIGHT PROGRAMMABLE 70 AND 140 MHz HIGH-PERFORMANCE VIDEO/AUDIO MODULATOR OPTIONS Up to four internal programmable audio subcarrier modulators Support full I:N redundant multiformat configurations,
More informationCABLE TV on fiber. CABLE TV FIBERLINK Pass 100+ TV channels on 1 SingleMode fiber with no need for amps
#FBS-870R-WALL-econ Reasonable prices, priceless reasoning. CABLE TV on fiber CABLE TV FIBERLINK Pass 100+ TV channels on 1 fiber with no need for amps Combine dozens of analog and digital channels in
More information40G SWDM4 MSA Technical Specifications Optical Specifications
40G SWDM4 MSA Technical Specifications Specifications Participants Editor David Lewis, LUMENTUM The following companies were members of the SWDM MSA at the release of this specification: Company Commscope
More informationMODEL OTM-4870 FREQUENCY AGILE 870MHz F.C.C. COMPATIBLE TELEVISION MODULATOR
MODEL OTM-4870 FREQUENCY AGILE 870MHz F.C.C. COMPATIBLE TELEVISION MODULATOR USERS MANUAL Phone: (209) 586-1022 (800) 545-1022 Fax: (209) 586-1026 E-Mail: salessupport@olsontech.com 025-000412 Rev. B www.olsontech.com
More informationCONVI104 SWITCHER & ANALOG TO SDI CONVERTER CONVI 104-M 15/03/2006
PAL and NTSC compatible 10-bit sampling Five-stage comb filter EDH generation and insertion Twin SDI output Frame Synch. with optional board (FS104) CONVI 104-M 15/03/2006 1 INSTALLATION AND USE OF THE
More information400G-FR4 Technical Specification
400G-FR4 Technical Specification 100G Lambda MSA Group Rev 1.0 January 9, 2018 Chair Mark Nowell, Cisco Systems Co-Chair - Jeffery J. Maki, Juniper Networks Marketing Chair - Rang-Chen (Ryan) Yu Editor
More informationSix-Channel TDM Multiplexers for 3G, HD, SDI, and ASI. Installation and Operations. Manual
Manual DigiLink DLC156 Function modules Six-Channel TDM Multiplexers for 3G, HD, SDI, and ASI Installation and Operations Manual WWW.ARTEL.COM ii DLC156 Function Modules Installation and Operations Manual
More information384A Adapter Installation Instructions
Instruction Sheet 860237684 Issue 9, October 2012 SYSTIMAX Solutions 384A Adapter Installation Instructions General The 384A adapter (Figure 1) is a broadband video adapter that provides connectivity to
More information4 Channel HD SDI Over Fiber Transmitter and Reciever Extender with RS 485 Channel User Manual L-4SDI-FE-HD-TX/RX
4 Channel HD SDI Over Fiber Transmitter and Reciever Extender with RS 485 Channel User Manual L-4SDI-FE-HD-TX/RX 1 Contents CHAPTER 1. INTRODUCTION... 2 1.1 OVERVIEW...2 1.2 FEATURE...2 1.3 APPLICATION...3
More information