S020 fluorescent tube luminary

Transcription

1 S020 fluorescent tube luminary DESCRIPTION: Fluorescent lamps S020 are suitable above all for uniform lighting of bigger areas. Lamps from the range S020 are manufactured from extruded aluminium profile with plastic faces where two fluorescent tubes T5, a polished aluminium reflector and OSRAM electronic ballast are placed. The carrying section is tightened by a polyurethane seal that resists to all known lubrication and cutting fluids. The front side of the lamp is covered by a 4 mm strong hardened glass with extraordinary resistance against breakdown. Both side faces of the lamp are equipped with threads for the gland M20x1.5, so it is possible to choose complement of the gland left (L), right (R) or for continuous power supply (LR). The connective terminal box is hidden under the gland. TECHNICAL SPECIFICATION: Fluorescent tubes Luminous flux Consumption 2 x 24 W 3800 lm 53 W 2 x 39 W 7000 lm 87 W 2 x 54 W lm 120 W 2 x 80 W lm 178 W - Supply voltage 230V AC +-20% - Light source fluorescent tube T5, standard OSRAM Fluorescent tube lifetime h, ballast lifetime h - Ingress protection IP67 - Environment working temperature -20 až +50 C

2 ADVANTAGES: - Aluminium body ensures excellent heat removal from the tubes, significant increase of efficiency. - Extraordinary low height 31 mm only. - In-gland connection of mains, no luminary dismantle required. - Hardened flat front glass has more than 20x higher resistance against breakdown comparing standardly used glass tube. DIMENSIONS: - Width: 140 mm - Height: 31 mm - Length 2x 24 W: 635 mm - Length 2x 39 W: 935 mm - Length 2x 108 W: 1235 mm - Length 2x 160 W: 1535 mm LUMINARY CONNECTION: One face of the lamp (or both faces) is complemented by a gland M20x1.5. The connecting terminal box is accessible after unscrewing of the gland tightened by O ring. Thanks to this, the connection of the lamp to the supply is very quick and easy and does not require dismantle of the lamp s sealing components. LUMINARY INSTALLATION: The lamp is fastened to the machine standardly by plastic clamps inserted into the cut on the lamp s bottom part. The clamps have an opening with a diameter of 5.1 mm and the spacing of these openings is mm after mounting to the lamp. Four pieces of plastic clamps are attached as a part of the delivery in the standard version.

3 Upon wish, the lamp can be equipped with two joint clamps with the possibility of turning within the range degrees. TIPS FOR INSTALLATION: 1) Mount the lamp in such a way that the gland with cable is placed on the lowest point. 2) Hole for the supply cable through the panel, on which the lamp is mounted, should be lower than the lamp s gland 3) If you use a cable with metal braid, finish the braid before the gland, apply the shrinking tube through the end of the braid and lead only the middle of the cable with the shrinking tube into the gland. Water could rise into the lamp through the metal braid even through a very well tightened gland. Position of cable gland: Right

4 Ordering code Length Fluorescent tube type Luminous flux Fixture Outlet S020 24WX2/230R* 635 mm 2x TL5 24 W lm Plastic fixture 1x Gland right S020 39WX2/230R* 935 mm 2x TL5 39 W lm Plastic fixture 1x Gland right S020 54WX2/230R* 1235 mm 2x TL5 54 W lm Plastic fixture 1x Gland right S020 80WX2/230R* 1535 mm 2x TL5 80 W lm Plastic fixture 1x Gland right S020 24WX2/230L 635 mm 2x TL5 24 W lm Plastic fixture 1x Gland left S020 39WX2/230L 935 mm 2x TL5 39 W lm Plastic fixture 1x Gland left S020 54WX2/230L 1235 mm 2x TL5 54 W lm Plastic fixture 1x Gland left S020 80WX2/230L 1535 mm 2x TL5 80 W lm Plastic fixture 1x Gland left S020 24WX2/230LR 635 mm 2x TL5 24 W lm Plastic fixture 1x Gland L&R S020 39WX2/230LR 935 mm 2x TL5 39 W lm Plastic fixture 1x Gland L&R S020 54WX2/230LR 1235 mm 2x TL5 54 W lm Plastic fixture 1x Gland L&R S020 80WX2/230LR 1535 mm 2x TL5 80 W lm Plastic fixture 1x Gland L&R S020 24WX2/230R/J 635 mm 2x TL5 24 W lm Plastic joint 1x Gland right S020 39WX2/230R/J 935 mm 2x TL5 39 W lm Plastic joint 1x Gland right S020 54WX2/230R/J 1235 mm 2x TL5 54 W lm Plastic joint 1x Gland right S020 80WX2/230R/J 1535 mm 2x TL5 80 W lm Plastic joint 1x Gland right S020 24WX2/230L/J 635 mm 2x TL5 24 W lm Plastic joint 1x Gland left S020 39WX2/230L/J 935 mm 2x TL5 39 W lm Plastic joint 1x Gland left S020 54WX2/230L/J 1235 mm 2x TL5 54 W lm Plastic joint 1x Gland left S020 80WX2/230L/J 1535 mm 2x TL5 80 W lm Plastic joint 1x Gland left S020 24WX2/230LR/J 635 mm 2x TL5 24 W lm Plastic joint 1x Gland L&R S020 39WX2/230LR/J 935 mm 2x TL5 39 W lm Plastic joint 1x Gland L&R S020 54WX2/230LR/J 1235 mm 2x TL5 54 W lm Plastic joint 1x Gland L&R S020 80WX2/230LR/J 1535 mm 2x TL5 80 W lm Plastcic joint 1x Gland L&R

5 LIGHT DISTRIBUTION: S020 2x24W S024 2x39W S020 2x54W S020 2x80W