Description. Features MODEL ODN2P OPTICAL DISTRIBUTION NODE WITH TWO AMPLIFIED RF PORTS LIGHT LINK SERIES 2.

Transcription

1 MODEL ODN2P OPTICAL DISTRIBUTION NODE WITH TWO AMPLIFIED RF PORTS LIGHT LINK SERIES 2 Description Features The Light LinkB B Series 2 Optical distribution node with two amplified RF ports (ODN2P) has been designed to deliver interactive CATV and high capacity DOCSIS services. The ODN2P is IP67 rated and suitable for outdoor and indoor applications. The ODN2P deep fibre node solution suits the last-mile in broadband access networks. The small and rugged design makes this unit an ideal answer for fibre-to-the-apartment and fibre-to-the-curb applications. The ODN2P can also be equipped with return path transmitter modules for various optical wavelengths, making CWDM single fibre operation a viable solution. The ODN2P return transmitter has a 4.5 MHz pilot generator and an FSK modulator for node status monitoring. When connected to an RPQRM headend port, all node data is available to the NMS3 network management system. Suits CENELEC and NTSC standards up to 110 analog TV channels. Includes support for DOCSIS and DVB digital transmission standards. Two individually GaAsFET amplified RF outputs, for 1 GHz transmission systems. Field upgradeable diplexers and filters. Forward path twin receiver module capability with automatic AB protection switching. Integrated NMS3 network management capability. Supports segmentation with dual uplinks for increased DOCSIS traffic handling capacity Supports dual CWDM return transmitters. Environmentally hardened and robust deep fibre node solution.

2 P Specifications Forward Path Optical Operating wavelength: Optical Input range: Nominal design input: Return loss: Forward Path RF 1200~1600 nm Bandwidth ODN2P-[U]-0-[W]-[X]-[Y]-[Z]: ODN2P-[U]-3045-[W]-[X]-[Y]-[Z]: ODN2P-[U]-4254-[W]-[X]-[Y]-[Z]: ODN2P-[U]-6585-[W]-[X]-[Y]-[Z]: -2 dbm to +2.5 dbm -1 dbm > 45 db SC/APC, FC/APC requires adaptor (OA-FCAPC-SCAPC ordered separately) 45~1000 MHz 45~1000 MHz 54~1000 MHz 85~1000 MHz Output level Output Port 1: > 52 dbmv at 1000 MHz (1) Output Port 2: > 52 dbmv at 1000 MHz (1) RF amplifier: Flatness Without diplexer: With diplexer: Impedance: RF level adjustment: Inter-stage slope adjustment: Test point: Test point flatness: Dual GaAsFET ± 0.75 db 75 Ω 1 db step plug in (2)P 3 db to 16 db plug in (2)P 5/8 KS cable ports -20 db Forward Optical Link Performance P CNR: P(3)P 64 PAL B/G,D channels CSO: P(3)P CTB: P(3)P > 51 db > 63 dbc > 67 dbc 42 CENELEC channels (as per EN ) CSO: P(3)P CTB: P(3)P > 64 dbc > 68 dbc (1) Specified forward path RF output level applies to ODN2P revision 2 models only. (2) Please refer to Accessories section for details. (3) Forward Path CNR CNR (db) CNR vs OMI Optical input power (dbm) Fibre Protection Switching 3.2% OMI 4.0% OMI 5.7% OMI The ODN2P node can be configured for automatic switching protection on the fibre path by installing two receiver modules. The AB switching relay is part of the motherboard and does not need to be ordered separately. Optical input detection is done in the optical receiver modules themselves and jumpers on the motherboard determine the AB switching operation mode. The forward path protection switching is usually combined with one return path laser transmitter module and an optical splitter in the splicing tray, permitting a simultaneous feed of both the A and the B upstream fibre. The status of the forward path optical detectors is reported in the NMS3 status monitoring system via the 4.5 MHz return path pilot. If any of the optical inputs drop below the threshold, an alarm is generated and the AB switch is activated to connect with the secure fibre link. The ODN2P has three plug-in module slots which can be equipped for either two forward path receivers with one return transmitter, or for one forward path receiver with two return transmitters providing return path segmentation is active. (3) Measured with PBN LTM13 laser transmitter module, 10 km single mode optical fibre, -1 dbm input, 4% OM, 52 dbmv RF output at 1000 MHz and 14 slope from 85 to 1000 MHz. In 1550 nm systems the RF output levels are 1 db more and the CNR performance is 1 db better. CNR performance for NTSC television channels with 4 MHz RNB is another 1 db better.

3 Return Path Optical Laser Types Laser types for ODN2P-RT, return path transmitter module ODN2P-RT-FP-[Z]: ODN2P-RT-DFB0-[Z]: ODN2P-RT-DFB-[Z]: ODN2P-RT-1510-[Z]: ODN2P-RT-1530-[Z]: ODN2P-RT-1550-[Z]: ODN2P-RT-1570-[Z]: 1310 nm FP isolated laser, 1 mw (0 dbm) 1310 nm DFB isolated laser, 1 mw (0 dbm) 1310 nm DFB isolated laser, 2 mw (3 dbm) 1510 nm, CWDM series DFB 1530 nm, CWDM series DFB 1550 nm, CWDM series DFB 1570 nm, CWDM series DFB SC/APC standard FC/APC requires adaptors type OA-FCAPC-SCAPC (ordered separately) Return Path RF Performance Bandwidth ODN2P-[U]-3045-[W]-[X]-[Y]-[Z]: ODN2P-[U]-4254-[W]-[X]-[Y]-[Z]: ODN2P-[U]-6585-[W]-[X]-[Y]-[Z]: 5~30 MHz 5~42 MHz 5~65 MHz Input level range External Ports (ODN2P): 16 dbmv to 36 dbmv Internal Ports (ODN2P-RT): -1 dbmv to 19 dbmv, factory set for 6 dbmv Flatness: ± 0.5 db Impedance: 75 Ω Gain adjustment: Inter-stage Gain ( - loss): Connections: External: Internal: Test point: Test point flatness: 1 db step plug in - 8 db 5/8 KS cable ports to suit RF KS connectors RF cable pigtails with mini SMB connectors -20 db Return Path Transmitter Module Return Optical Link Performance Laser type: FP DFB 1### CWDM CNR: (4) 46 db > 48 db >48 db IMDB2B: (4) < -44 dbc < -52 dbc < -52 dbc NPR: (5) < -40 dbc < -40 dbc < -40 dbc (4) Measured with an RPQRM optical receiver, 4 channels (11.5 MHz, 26.5 MHz, 45.5 MHz and 58.5 MHz), 6% OMI. IMD2 is measured at f1 ± f2. CNR performance for NTSC television channels with 4 MHz RNB is another 1 db better. (5) Measured with RPQRM 35 MHz noise loading. Return Path CNR Performance CNR (db) CNR vs Optical Power Incident Optical Power (dbm) 6 % OMI 12 % OMI 20 % OMI PBN.ODN2P - Datasheet V5b - Released 06 Jul 09.doc - Page 3 of 12

4 PPP P Monitored Node Parameters PPPP Parameter: Node location ID: Return TX identification: AC line voltage: Internal DC rail voltage: Receiver optical input: Urgent alarm: Non-urgent alarm: AB protection switch state: Forward path RF output total power (including channel loading): Summary alarms: Return TX optical power: Return TX laser bias: Return TX internal temperature: (6) Range and Resolution: Derived from the associated RPQRM receiver port number in the headend, expressed as: [building floor rack shelf slot port] Model and serial number 30 Vac to 90 Vac 0 Vac to 120 Vac 1 V resolution 21 Vdc to 26 Vdc 0 Vdc to 47.3 Vdc 0.2 V resolution -4 dbm to +2 dbm -8 dbm to +4 dbm 0.5 db resolution > +2 dbm < -4 dbm RX1 input or RX2 input In dbm 0.5 db resolution - Non-urgent alarm, - Urgent alarm Expressed in dbm Expressed in ma 0 C to 80 C 0 C to 125 C 1 C resolution General Power: Coax line KS 5/8 : Power consumption: 1Rx: 1Rx + 1Tx: 1Rx + 2Tx: 2Rx + 1Tx: 35 Vac to 90 Vac 44 W 46 W 48 W 49.4 W Operating temperature: -20 C to 60 C Storage Temperature: -40 C to 80 C Dimensions (HxWxD): 157 x 222 x 254 mm Ship size (HxWxD): Weight (1Rx + 1Tx): Ship weight (1Rx + 1Tx): Enclosure IP rating: 190 x 240 x 310 mm 4.4 kg (7)P 5.1 kg IP67 (7) Unit weight may vary somewhat depending on model options. (6) Status monitoring of an ODN2P node requires an RPQRM return path receiver in the headend. This receiver is located in an OCMR-SNMP chassis, which in turn generates SNMP traps to disseminate alarms and accepts SNMP poll requests to report the node status. PBN.ODN2P - Datasheet V5b - Released 06 Jul 09.doc - Page 4 of 12

5 Order Details Model Codes for complete factory pre-configured and tested optical nodes: ODN2P-[U]-[V]-[W]-[X]-[Y]-[Z] U V W X Y Z Forward path receiver U1RX U2RX Diplexers U3045 U4254 U6585 Optical connectors Single optical receiver Two optical receivers with automatic AB protection switching. No diplexers Diplexers for 5~30/45~1000 MHz Diplexers for 5~42/54~1000 MHz Diplexers for 5~65/85~1000 MHz UE E2000/APC connectors SC SC/APC connectors Primary return laser transmitter UFP UDFB0 UDFB U1470 U1490 U1510 U1530 U1550 U1570 U1590 U1610 No return transmitter FP laser 1310 nm, 1 mw (0 dbm) DFB laser, 1310nm, 1 mw (0 dbm) DFB laser, 1310nm, 2 mw (3 dbm) 1470 nm CWDM DFB laser, 2 mw (3 dbm) 1490 nm CWDM DFB laser, 2 mw (3 dbm) 1510 nm CWDM DFB laser, 2 mw (3 dbm) 1530 nm CWDM DFB laser, 2 mw (3 dbm) 1550 nm CWDM DFB laser, 2 mw (3 dbm) 1570 nm CWDM DFB laser, 2 mw (3 dbm) 1590 nm CWDM DFB laser, 2 mw (3 dbm) 1610 nm CWDM DFB laser, 2 mw (3 dbm) Secondary return laser transmitter UFP UDFB0 UDFB U1470 U1490 U1510 U1530 U1550 U1570 U1590 U1610 No secondary return transmitter FP laser, 1310 nm, 1 mw (0 dbm) DFB laser, 1310nm, 1 mw (0 dbm) DFB laser, 1310nm, 2 mw (3 dbm) 1470 nm CWDM DFB laser, 2 mw (3 dbm) 1490 nm CWDM DFB laser, 2 mw (3 dbm) 1510 nm CWDM DFB laser, 2 mw (3 dbm) 1530 nm CWDM DFB laser, 2 mw (3 dbm) 1550 nm CWDM DFB laser, 2 mw (3 dbm) 1570 nm CWDM DFB laser, 2 mw (3 dbm) 1590 nm CWDM DFB laser, 2 mw (3 dbm) 1610 nm CWDM DFB laser, 2 mw (3 dbm) Return pilot and status monitoring 0 No pilot, no status monitoring SMS FSK status monitoring on 4.5 MHz pilot Configuration notes: Automatic forward path AB protection switching permits only one return transmitter to be installed (3 slots only). However, this one transmitter can feed two uplink fibres via an optical splitter. Segmented nodes with two return transmitters are limited to one receiver module. (3 slots only) PBN.ODN2P - Datasheet V5b - Released 06 Jul 09.doc - Page 10 of 12