AGRO. The Cable Glands.
|
|
- Winfred Golden
- 5 years ago
- Views:
Transcription
1 AGRO. The Cable Glands.
2 Systems and solutions for industrial applications and electric installations 2 For transportation, a secure grip on the feed line is vital. The Progress cable glands used in railway technology do not slacken, despite high vibrating loads. This results in perfect power and signal transmission throughout the train. For railwail applications according to EN 45545, you can now get certified cable glands. Nickel-plated brass or synthetic Syntec cable glands represent the optimal solution for a wide range of daily tasks. The patented, unique lamellar technology clamps the cable smoothly and guarantees practical cable entry with outstanding strain relief. Dust and exhaust emissions cause high levels of chemical pollution in tunnels. This calls for the use of stainless and acid-resistant stainless steel A4 cable glands with FPM sealing insert. Cable diameters from 2.0 mm to 52.0 mm are used here on a daily basis. For shipbuilding industry, cable glands have to meet specific requirements. DNV certification grants the fulfillment of such requirements. All metric AGRO cable glands are DNV certified. Additionally all AGRO Ex cable glands are approved, irrespective of their entry thread.
3 Electronically-controlled substations operate in a smooth way as long as parasitic currents do not affect their function. The concentric screened tap connection of Progress EMC cable glands discharges interference currents to earth and thus grants lowest transfer impedance. In food industries, anti-bacterial substances guarantee a high level of safety. These chemical agents, however, also place a considerable burden on production facilities. AGRO cable glands made of stainless steel A2 reliably meet these daily challenges. Progress ultraflat cable glands are EHEDG certified. Refineries and production facilities in the chemical industry with potentially explosive areas make specific demands on electrical installations. AGRO offers special cable glands and accessories for flameproof enclosure Ex d IIC, increased safety Ex e II and intrinsic safety Ex i II protection types that have been standardised throughout Europe. For the implementation of wind turbine generators, the Progress range offers cable protecting strain relief with high distortion protection. This applies to both round and flat cables. 3
4 AGRO AGRO s founder, Alfred Grossauer, invented the modern IP 68 cable gland in the 1950s. Since then, the company has further developed and perfected its knowhow and capabilities relating to the product. A team of approximately one hundred dedicated employees is there to ensure that you will receive a state-of-the-art product that conforms with all applicable standards. Every cable gland comes with a comprehensive package of services. Some of these such as a professional support at the installation location are immediately obvious, while others unfold in the background and are only represented by the fact that the appropriate product is delivered at the required time. In our own testing laboratory, we ensure that the products you receive from us are made of high quality. 4
5 Two clamping technologies for all requirements Progress in brass, steel or synthetic material The outstanding compression technology of AGRO Progress cable glands guarantees an effective seal and excellent cable-protecting strain relief, also for dynamic loads. Sealing inserts for special applications such as railway applications according to EN 45545, for drinking water, food industry or cleanroom applications are available as standard. 1 Short, long or special entry threads designed as metric, Pg-, Gaspipe or NPT 2 High distortion protection thanks to retaining grooves in the lower part 3 Two-piece sealing inserts for larger clamping range 4 Inner contours matched to the sealing insert guarantee its tightness in compliance with protection class IP 68 up to 10 bar and IP 69K Syntec in brass or synthetic material Syntec cable glands with their innovative lamellar technology are particulary suited for a flexible everyday use. The pre-fixation of the synthetic compression nut allows for overhead installation. 1 Short or long entry threads designed as metric, Pg- or NPT 2 The elastic sealing rings with good chemical resistance provide a reliable seal, are particularly durable and offer guaranteed protection to protection class IP 68 3 Lamellar geometry with movable jointed lamellas support the insertion of varying diameters and ensure outstanding strain relief and distortion protection 4 The large spanner flats of the synthetic compression nuts ensure reliable and secure hold when turning 5
6 Progress EMC - cable glands for electromagnetically compatible installations The Progress EMC easyconnect cable gland ensures full installation control and compensates for tolerances in the shield thickness for a reliable shield grip. The contact spring system facilitates a good and reliable shield contact, for both partially stripped shield cables and fully exposed cable shields as well as an easy and quick assembly. Progress EMC Rapid is the cable gland with two contact options, for very fast and simple shield contact by means of an integrated contact disc. It facilitates good contact for both partially stripped shield cables and fully exposed cable shields, which may also be extended and it is easily and quickly assembled. Progress EMC cable glands in nickle-plated brass, with the tried-and-trusted contact sleeve, make possible 360 sleeve contact with the braided shield that ends in the cable gland. The geometry of the contact sleeve prevents shearing of the braided shield. Progress EMC Series 85 cable glands in brass ensure, by means of the collet, a particularly low-impedance connection between the braided shield and the metal casing while facilitating reliable cable routing. The Progress EMC Series 85 cable glands are paticularly suitable for high leakage currents. 6
7 Progress cable glands certified for potentially explosive atmospheres Cable glands of ignition protection type Ex d IIC must be able to withstand the pressure of the explosion of an explosive mix inside the casing, and prevent the transmission of the explosion to any explosion-risk atmosphere outside the casing. Series 18 cable glands feature supplemental strain relief to protect the cable, thanks to suitable clamping and an appropriate trumpet-shaped geometry. Progress Ex Compact cable glands satisfy the requirements of protection types Ex d IIC and Ex e II. Their particular advantages include their compact design, their large clamping range and the option of a version for feeding through several cables. For Ex e II and Ex i II applications, the Progress range of cable glands for the feeding through of one or more cables includes both nickel-plated brass and synthetic versions. For pressure balance in explosion-risk areas, AGRO offers a nickel-plated pressure balance element with a membrane, which is certified for protection type Ex e II. 7
8 Progress : Modular cable gland assembly kit in nickle-plated brass The modular design of our Progress range is one of its great strengths. The components are designed with the others in mind, and can be freely combined with each other. Customer-specific requirements can be flexibly, practically and quickly met. We will combine the suitable upper and lower parts with the right seal insert for you, and in this way deliver the most effective and efficient solution for your needs. Upper part Standard compression nut Trumpet Trumpet with clamps Clamps Conduit glands Antikink spring Sealing inserts Short one or two-piece sealing insert made of NBR, TPE, special TPE acc. EN or FPM (heat resistant) Long one or two-piece overall length insulating sealing insert made of NBR or TPE special TPE acc. EN with standard holes with customised holes Lower Part with short entry thread - metric - Pg - NPT - Gaspipe with long entry thread - metric - Pg - NPT - Gaspipe 8
9 Customisation In case you have special requirements, we are able to customise each and every component of our Progress cable glands: turned parts as well as sealing inserts can be tailored to meet your needs. You save assembly time and gain safety trough the optimum solution. Customised upper parts Upper parts can be customised for shape and thread. By working closely with the customer, a component is developed which best meets individual requirements and offers superior benefit to the user. Customised sealing inserts Customer-specific lower parts Sealing inserts can be customised for shape and number of feedthroughs and also with regard to the selection of material. We work with the following materials: - NBR - TPE - TPE-V - FPM - Silicone caoutchouc - HNBR - EPDM - Special TPE acc. to EN Lower parts can be customised for shape and entry thread. All sizes and customer-specific thread lengths are available with the following types of threads: - metric - NPT - Pg - Gaspipe 9
10 Overview Progress and Syntec cable glands Cable glands Progress nickel-plated brass Cable glands Progress stainless steel A2 / A4 Special cable glands and cable entries nickel-plated brass EMC cable glands Progress nickel-plated brass Cable glands nickel-plated brass according to EN Ex cable glands nickel-plated brass or synthetic Combination conduit glands nickel-plated brass with integrated cable gland Synthetic cable glands Progress Cable glands Syntec, nickel-plated brass or synthetics Accessories for cable glands synthetic and metal AGROflex Braided sleevings and AGROtube Braided glass fibre sleevings 10
11 AGRO outstanding supply capabilities We have what you need and you will get it immediately! AGRO has an extensive network of specialist distributors in 40 countries. We are there where our customers are. To enable quick delivery to anywhere in the world, we send our cable glands by airfreight where necessary. Since our company is certified as a Known Consignor, the goods pass through airports without delay and the time required between placing of an order and delivery to the customer is significantly reduced. Convenience and confidence rolled into one! Known Consignor 11
12 AGRO. The cable glands. Progress cable glands made of metal or synthetic material are proven utilities for professional cable routing in industrial plants. The excellent compression technology ensures tight seals and strain relief which is exceptionally easy on cables. EMC cable glands made of brass ensure a low-impedance connection between the braided shield and the metal cabinet while maintaining secure cable entries. Progress Ex cable glands made of synthetic or brass ensure secure cable entries in potentially explosive environments. Syntec cable glands made of synthetic material or brass are the optimal solution for your daily installation tasks. The patented, unique lamellar technology always guarantees cable routing with excellent strain relief. Accessories and pressure balance elements With a comprehensive range of accessories such as lock nuts, reduction and enlarging fittings or locking plugs as well as pressure balance and drainage elements made of nickel-plated brass or synthetic material, we complete the product range KP en 1.0 A Technical information and advice Further information about products, system solutions and communication media can be found on our website: or using the app. GET IT ON GOOGLE PLAY Our technical staff will also be happy to assist in case of any question or need for information. We look forward to hearing from you. AGRO phone: +41 (0) AGRO info@agro.ch AGRO AG A KAISER COMPANY Korbackerweg 7 CH-5502 Hunzenschwil Phone +41(0) Fax+41(0) info@agro.ch
EMC cable glands. AGRO cable glands for interference-free cable installations.
EMC cable glands. AGRO cable glands for interference-free cable installations. EMC. A topic with serious consequences. Electromagnetic compatibility (EMC) is something that everyone in our modern world
More informationHigh Performance TOR-SPRING EMI/RFI Cord Grips
High Performance TOR-SPRING EMI/RFI Cord Grips The Importance of Meeting EMC Requirements When specifying and designing today s electronic control and data acquisition systems, consideration must be given
More information3 Cleaning. 4 Technical data
EXC+ EXC- Sig- SIG+ SEN- SEN+ 2.4 Attaching cable to the analog board Attaching cable of the weighing cell to the system solution Connect the cable to the appropriate terminal strip of the Ex1 system solution
More informationDMP 331 DMP 331. Industrial Pressure Transmitter. for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial. tri-matic.
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter from 0... 00 mbar
More informationKVT Split cable glands
KVT Split cable glands Description Type Order Inserts KT Thread PU No. small large Thread length KVT is a circular split frame for quick and easy installation of cables or complete cable harnesses. Polyamide
More informationPendant Light Fitting IEC Series 6470/2
> Available light sources high-pressure sodium lamps (HSE) metal halide lamps (HIE) halogen lamps (QT) > Versatile mounting methods > Enclosure made of saltwater-resistant aluminium www.stahl.de 11435E
More informationDMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter Nominal pressure from 0... 6 bar up to 0... 600 bar Output
More informationDMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 6 bar up to 0... 600 bar Output signals -wire: 4... 0 ma -wire:
More informationDMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0,35 % FSO. Nominal pressure
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0,5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
More informationEXPlora. Introduction
Introduction EXPlora The EXPlora range is most suited to manufacturers of ancillary electrical equipment such as motors, pumps, lighting equipment, process and control gear for use in factories and plant
More information7 Lighting Technology
7 Lighting Technology Floodlight 09676E00 explosion protected floodlight for use in explosive gas atmospheres of Zone 2 as well as in areas with combustibledust of Zone 21 and Zone 22. Explosion protection
More informationEMC 2 CABLE GLANDS INTRO EMC 2 SERIES. Tighten the cable gland to the housing. Remove outer sheath of shielded cable. Insert cable until EMC spring.
EMC 2 CABLE GLANDS These EMC cable glands combine several advantages in one product. First, you get the same clamping ranges as the standard brass glands. The protection class is IP68. In order to get
More informationHazLoc Essential Guides: Cable Glands
HazLoc Essential Guides: Cable Glands Intertek Deeside Lane, Chester, CH1 6DD UK hazloc@intertek.com 01244 882590 www.intertek-hazloc.com Contents Contents... 1 Introduction... 1 Legislation... 3 Cable
More informationNEW. Datasheet. Field wiring Cabtite Easy Cable Entry System!
Datasheet Field wiring Cabtite Easy Cable Entry System! NEW Do you really need a plug-in connector on the out-side of your switchgear cabinet? Or do you simply just want to make connections? Now you can
More informationKVT Split cable glands
KVT Description Type Order Grommets Thread PU KVT is a circular split frame for quick and easy installation and sealing of cables with connectors or complete cable harnesses. 3 KVT 20** 34 24 M20. Polyamide
More informationProduct group 1. Product description. At a glance. Cable entry systems for entering pre-terminated cables
Product group 1 Cable entry systems for entering pre-terminated cables At a glance The patented cable entry system enables the user to enter, seal and provide strain relief for pre-terminated and standard
More informationTYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-12360 This is to certify that the Cable Gland with type designation(s) ADE & RE; AD; FF; MM; SP; ET; LN. Manufactured by COOPER CAPRI SAS
More informationwww.mete-enerji.com.tr INDUSTIAL IEC PLUGS AND SOCKETS INDUSTIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 225/400-265/460 V~ 60 Hz (1) 3 P+N+ 3 P+ 2 P+ 120/208-144/250V~
More informationHN Connectors. Automatic Connector. Introduction. Contents. 631/ FAX 631/
Connectors Introduction 2004 Automatic Connector. All rights reserved. pdf 1.0 4-13-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable
More informationM23 RJ 45 M23 Profinet M16 (10pole)
Circular Connectors Industrial Ethernet M23 Hybrid + Power, Ethernet and Signal + Single-cable-solution for HIPER- FACE DSL and EnDat 2.2 use + Data transfer up to 500 Mbit / s + Simple assembly with snap-in
More informationGuide for installers. METTLER TOLEDO MultiRange System solution analog Ex1. Hazardous area. Safe area
Guide for installers METTLER TOLEDO MultiRange System solution analog Ex1 Hazardous area Safe area System solution analog Ex1 Contents Contents Page 1 Safety precautions... 2 2 System overview... 3 2.1
More informationLMP 305. Slimline Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.
Slimline Probe Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO Nominal pressure from 0... mh 2 O up to 0... 250 mh 2 O Output signals 2-wire: 4... 20 ma
More informationDMP 331Pi. Precision. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.
Precision Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm Version with cooling element accuracy according to IEC 0770: 0. % FSO Precision Pressure
More informationAmphenol. Amphenol-Tuchel Electronics GmbH. C 112 Series M12 - Connectors
Amphenol Amphenol-Tuchel Electronics GmbH C 112 Series M12 - Connectors We connect con The company Amphenol-Tuchel Electronics is a worldwide leader in electrical connectors and contacting devices. Our
More informationCable and Pipe Entry Products Cable penetration by design
Cable and Pipe Entry Products Cable penetration by design Design-A-Flange KLIKSEAL RUTASEAL TSS News Design-A-Flange Our new and revolutionary flange system allows you to configure your own flange, based
More informationSPECIFICATION FIBER OPTIC SPLICE CLOSURE. Spec No : VSS-1007-BS403A-04A/SD. VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division
SPECIFICATION FIBER OPTIC SPLICE CLOSURE Model Spec. No. Distribution Depts. VSOF-BS403A VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division Sales Division Management Division Revision 10. 07 (Rev.4)
More informationKEL 183 Cable entry frames
KEL 183 Cable entry frames Description Type Order.No. Inserts KT PU KT 183 KT large The new version of the split cable entry frame KEL 183 enables the user to route cables and tubes with a diameter up
More informationDMP 339. Pressure Transmitter. with G ¼" flush diaphragm. Pressure Transmitter. Industrial. accuracy according to IEC 60770: 0.
DMP 9 Industrial Pressure Transmitter with G ¼" flush diaphragm accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter DMP 9 Nominal pressure from 0... 60 bar up to 0... 600 bar Output
More informationCable entry and cable holding systems Solutions for cable applications
Cable entry and cable holding systems Solutions for cable applications Overview Murrplastik Systemtechnik GmbH has offered cable entry strips, cable entry panels, strain relief systems, cable holding systems
More information- special pressure ranges - variety of electrical and mechanical. Characteristics. - other versions on request
DMP Industrial Pressure Transmitter for Low Pressure piezoresistive stainless steel sensor O p t i o n : f l u s h v e r s i o n accuracy: 0.75 %, 0.5 %, 0.0 %, 0.05 % FSO BFSL (0.5 %, 0.5 %, 0. %, 0.
More informationCatalog. Industrial Plugs & Sockets The complete range
Catalog Industrial Plugs & Sockets The complete range Contents Type Page Introduction... 4 IEC 60309-2 (clock)... 5 Product overview Critical & Safe... 6 Tough & Safe... 7 Easy & Safe... 8 Plugs Splashproof...
More informationConnectivity accessories by Nestor Cables
Connectivity accessories by Nestor Cables NesCon product family includes essential installation and connection accessories for fibre optic networks, from ODFs to joint closures and terminations. www.nestorcables.com
More informationSPECIFICATION. Spec No : VSS-1402-CS603B
SPECIFICATION Spec No : VSS-1402-CS603B 1. INTRODUCTION 1.1. General This specification covers the design requirements and characteristics required of fiber optic splice closures to be used on fiber optic
More informationPressure transmitter For applications in hazardous areas Model IS-3
Pressure Pressure transmitter For applications in hazardous areas Model IS-3 WIKA data sheet PE 81.58 for further approvals see page 10 Applications Chemical, petrochemical industry Oil, natural gas Machine
More informationKEL 24 Cable entry frames
24 Cable entry frames Split inserts Description Type Order No. Inserts KT PU small large The 24 matches exactly the cut-out dimensions of 24-pole standard industrial connectors. 24 42241 - The split insert
More informationI Ex-protected connectors exlink I
Y-Junction-box Technical data Y-Junction-box / Marking to 94/9/EC II 2 G Ex de IIC T6/T5 / II 2D Ex td A21 T80 C/ T95 C EC-Type Examination Certificate PTB 05 ATEX 1084 IECEx-Certificate of Conformity
More informationInstallation instructions Ex frames
General information Installation and maintenance: For European member countries of GENELEC shall standard EN 60079-14 and EN 60079-17 be considered. For countries members of IECEx shall standard IEC 60079-14
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION (FIBER OPTIC SPLICE CLOSURE) Model Spec. No. Distribution Depts. VSOF-BS403A SJP-0609-403A-01A/SD Quality Assurance Team Manufacturing Division Sales Division Management Division
More informationDS 210. Electronic Pressure Switch. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure
Without Media Isolation accuracy according to IEC 60770: 0. % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Contacts, or independent contacts freely configurable Analogue output wire:... 0
More informationConnecting cables NEBS, for sensors
Connecting cables NEBS, for sensors Connecting cables NEBS, for sensors Product range overview Function Version Type code Connection technology (Electrical connection 2) Connecting cable Cable characteristic
More informationControl cabinet interface and cable entry systems
Modlink MPV Control cabinet interface The Modlink MPV control cabinet interface provides the connection from the control cabinet to the fieldbus environment (outside) in a simple way. Durable connection
More informationDMK 457 DMK 457. Pressure Transmitter for Shipbuilding and Offshore
GmbH Postal address: House address Fon (+49) 0 22 42-8703-0 Postbox 26 Löhestr. 37 Fax (+49) 0 22 42-8703-20 http: // www.tematec.de 53759 Hennef 53773 Hennef e-mail: team@tematec.de Data Sheet Page /5
More informationSmall Circular Connector. JN1/JN2 Series. Dust Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series Angle Plug CONNECTOR MB-0054-8 October 2009 [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
More informationDMK 457 DMK 457. Pressure Transmitter for Shipbuilding and Offshore
Pressure Transmitter for Shipbuilding and Offshore ceramic sensor accuracy: 0.25 % FSO BFSL (0.50 % FSO IEC 60770) nominal pressure ranges from 0... 0.6 bar up to 0... 600 bar The pressure transmitter
More informationInductive sensor. 2-wire, analog output BI8-M18-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M18 x 1 Chrome-plated brass 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection Wiring diagram Type code Ident no.
More informationUnipole and Multipole Connectors
Unipole and Multipole Connectors Miniature Cylindrical Connectors With Push-Pull-Locking Shenzhen Medplus Connector Co.,Limited. 2 th Floor,Ming An Street,GongMing Town, Baoan District, Shenzhen, China
More informationAutomatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces
Automatic s 2004 Automatic. All rights reserved. pdf 1.0 3-18-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable Plugs...................
More informationCustomer-Owned Outside Plant
Customer Premises Products (Enterprise) 3 Customer-Owned Outside Plant Fiber Optic Splice Case 2178 Series and Accessories 372 Fiber Optic Dome Splice Closure FD Series 376 Fibrlok II Universal Optical
More informationDMP 331i DMP 333i. Precision Pressure Transmitter. Stainless Steel Sensor. accuracy according to IEC 60770: 0.1 % FSO
DMP i DMP i Precision Pressure Transmitter Stainless Steel Sensor accuracy according to IEC 600: 0. % FSO from 0... 00 mbar up to 0... 600 bar Output signal wire:... 0 ma wire: 0 0 V others on request
More informationQuality products from a single source
Velocity sensors Quality products from a single source For more than 50 years Brüel & Kjær Vibro has been a leading manufacturer of vibration measuring instruments and machine condition monitoring systems.
More informationGel-sealed in-line fiber optic closure
SCIL-C Gel donut INSTALLATION INSTRUCTION TC-1363-1-IP Rev A, Oct 2017 www.commscope.com Gel-sealed in-line fiber optic closure Contents 1 General 2 Sizing and product kit information 3 Installation conditions
More informationUp to 85% higher Service Life due to efficient sealing method.
Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348
More informationEXLUX ECOLUX C-LUX 6480 Series
EXLUX ECOLUX C-LUX 6480 Series 6000 6008 6400 6408 6600 6608 6500 6480 Explosion Protected Fluorescent Luminaires for Hazardous and Corrosive Applications Features: Electronic Ballasts For Fluorescent
More informationSingle Point Flow Monitor SW118 SW119
SW8 SW9 SW8 SW9 Single point flow monitors with MIN/MAX monitoring function, suitable for water, oil, air and media with similar thermal conductivities (selectable by means of a medium switch). With either
More informationJUMO extherm-at Type , Explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22
Data Sheet 605055 Page 1/10 Type 605055, Explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22 Special features Single thermostat and double thermostat with capillary or rigid thermowell
More informationOMNI FIT Connectors and Universal Trimming Tools
OMNI FIT Connectors and Universal Trimming Tools Flexible tool options for fully compatible connectors RADIO FREQUENCY SYSTEMS T h e C l e a r C h o i c e OMNI FIT Standard OMNI FIT connector families
More informationInductive sensor With analog output BI15-M30-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M30 x 1.5 Chrome-plated brass 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection Wiring Diagram Type designation
More informationPendant Light Fittings Series 6050
> Saltwaterresistant enclosure, aluminium alloy, optionally with painting > Maintenancefree operation and long service life with induction lamp or LED > Mounting with ring bolts or tiltable mounting bracket
More informationCONTACT-DUO-PROFILE. Contact-Duo-Profile overview
13 6.3 13 6.3 4.7 20.7 24.6 +1/-0 24.6 +1/-0 2.5 24.6 +1/-0 20.7 4.3 +0.3-0.4 3.6 ±0.3 32.5 32.5 32.5 5 2 CONTACT-DUO-PROFILE Contact-Duo-Profile overview 13 6.3 13 6.3 4.7 2.5 16±0.8 4.7 2.5 4.7 2.5 2.6
More information3M Distribution Box (DDB)
3M Distribution Box (DDB) Merged Copper and Fiber Pole/Post Mount Enclosure Installation Instructions November 2015 78-0015-2736-1-A 2 November 2015 78-0015-2736-1-A Contents 1.0 General 2.0 Enclosure
More information03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through
Feed-through Feed-through FEED-THROUGH Series Size Page Rotary Feed-through for Robots DDF 202 DDF 031 206 DDF 040 208 DDF 040-1 210 DDF 050 212 DDF 050-1 214 DDF 063 216 DDF 080 218 DDF 080-1 220 DDF
More informationNational Wire and Cable and National Cable Molding Headquarters Los Angeles California
National Wire and Cable and National Cable Molding Headquarters Los Angeles California CAPABILITIES Medical Business Machines Communications Equipment Computer Equipment Audio Systems General Instrumentation
More informationInstallation instructions Cable transit device Roxtec RS ES Ex
General information Installation and maintenance: For European member countries of GENELEC, shall standard EN 60079-14 and EN 60079-17 be considered. For countries members of IECEx shall standard IEC 60079-14
More informationSmall Circular Connector. JN1W / JN2W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector / Series CONNECTOR MB-0178-5 December 2012 Angle Plug Cable Connecting Straight Plug Wall Mount Cable Connecting Waterproof Cap
More informationGuide for installers. METTLER TOLEDO MultiRange System solution Point Ex.
Guide for installers METTLER TOLEDO MultiRange System solution Point Ex www.mt.com/support System solution Point Ex Contents Contents Page 1 Safety precautions... 4 2 System overview... 5 2.1 Using the
More informationFIST-MB2-S. FIST Medium Box for Cable Splicing Only. 4 Cable installation. 1 Introduction. Contents. 2 General. 5. Fiber routing to individual trays
FIST-MB2-S I N S T A L L A T I O N I N S T R U C T I O N FIST Medium Box for Cable Splicing Only Contents 1 Introduction 1.1 Product description 2 General 2.1 Tools 2.2 Kit contents 3 Installation and
More informationEX-PROTECTED PORTABLE POWER SUPPLY UNITS
EX-PROTECTED PORTABLE POWER SUPPLY UNTS 125 A for Zone 1 Special requirements apply for power distributions for the use and operation of portable equipment in hazardous areas in Zones 1, 2, 21 and 22.
More informationEXLUX ECOLUX 6480 Series
EXLUX ECOLUX 6480 Series L I G H T I N G 6000 6008 6400 6408 6600 6608 6480 Explosion Protected Fluorescent Luminaires for Hazardous and Corrosive Applications Features: Electronic Ballasts For Fluorescent
More informationTRANSMISSION ENGINEERING STANDARD TES-P , Rev. 0 TABLE OF CONTENTS 1.0 SCOPE 2.0 CABLES SPLICES
1.0 SCOPE TABLE OF CONTENTS 2.0 CABLES SPLICES 2.1 Definitions 2.2 Scope of Specifications and Drawings 2.3 General Requirements 2.4 Routing Cables 2.5 Connectors 2.6 Conductor Connections 2.7 Heat Shrinkable
More informationDS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections
Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing Description The electronic pressure switch is the successful combination of hygienic process connections with flush welded
More informationDMP 331i / DMP 333i LMP 331 i
DMP i / DMP i LMP i Precision Pressure Transmitter / Screwin transmitter Stainless Steel Sensor accuracy according to IEC 60770: 0. % FSO from 0... 00 mbar up to 0... 600 bar Output signal wire:... 0 ma
More information2.9 Sigma/ 2 Plunger Metering Pumps
.9 Sigma/ Plunger Metering Pumps.9Sigma/ Plunger Metering Pumps.9.1 Sigma Plunger Metering Pumps The Sigma/ motor plunger metering pump has a high-strength inner metal housing for those component parts
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAE000010X File No: 828.90 Job Id: 262.1-010486-4 This is to certify: That the Cable Gland with type designation(s) ADE Issued to COOPER CAPRI SAS (EATON GROUP),
More informationJUMO extherm-at Type , explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22
Data Sheet 605055 Page 1/8 Type 605055, explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22 Special features Single thermostat with capillary or rigid thermowell and double thermostat
More informationHOG 86. The incremental HeavyDuty encoder for highest demands
HOG 86 The incremental HeavyDuty encoder for highest demands Extremely robust. Failsafe in any environment The solid, extremely sturdy housing with minimum 10 mm wall thickness is a prerequisite design
More informationOperating instructions
108183 2017-05-17 Page 1 0359 Operating instructions TPPL-EX series Hazardous environments luminaires Please read the instructions carefully before starting any works! Content: 1. Safety instructions 2.
More informationMax. temp. of sensor C. Capillary tube mm. Switching difference K. Sensor cartridge mm
21.610/1 RAK: Universal thermostat How energy efficiency is improved Demand-led controlling, monitoring and limiting, without auxiliary energy. Areas of application For controlling and monitoring the temperature
More informationSeaflex Beachflex. Joint Closures SEAFLEX BEACHFLEX JOINT CLOSURES
Seaflex Beachflex Joint Closures SEAFLEX BEACHFLEX JOINT CLOSURES 1 a complete solution is the Tykoflex submarine joint closure for fibre optic submarine cables. The closure is made of highly corrosion-resistant
More informationTWINTEC B Signal Circular Connectors
Signal Circular Connectors 67 Ordering information signal circular connectors ll standard connectors are published in this catalog. However, this catalog does not provide customer specific designs or
More informationInductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationMedium Box for Cable Termination
FIST-MB2-T I N S T A L L A T I O N I N S T R U C T I O N Medium Box for Cable Termination Contents 1 Introduction 1.1 Product description. 2 General 2.1 Tools 2.2 Kit contents 3 Installation and pre assembling
More informationRevision 1.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded view...
More informationSentronic PLUS Electronic Pressure Regulator. Installation Manual
Sentronic PLUS Electronic Pressure Regulator Installation Manual Sentronic PLUS ASCO NUMATICS Sentronic PLUS Electronic Pressure Regulator Electrical Characteristics * Max. ripple: 10 % Specifications
More informationLevel Measurement Point level measurement - RF Capacitance switches
Overview Configuration Installation Standpipes 50 (2) 20 (0.79) max. is a compact, 2-wire, inverse frequency shift capacitance switch for level and material detection in constricted spaces, interfaces,
More informationFlexibility and Safety. BERNSTEIN safety hinge switches
Flexibility and Safety BERNSTEIN safety hinge switches BERNSTEIN safety hinge switches Advantages of safety hinge switches in comparison to traditional door contacts Easy to install and tamper-resistant
More information1 Inductive proximity switches. 5 Connecting cables. Highlights: New:
Highlights: - All-metal housings - Miniature sizes - Long operating distances - Extreme environmental conditions - Analog outputs New: - All-metal devices for food industry and sea-water applications -
More informationGrounding-type plugs and sockets K Product information
Product information Plugs and sockets for harsh conditions. SCHUO by MENNEES with the hammer symbol. Acc. to VDE 0105 part 115. Made of high-grade AMAPLAST. Acc. to VDE 0620 for harsh conditions. Application
More information5374 Series Air Activated Tube Tester (For testing straight-through exchanger without removing both heads.)
TM-73 July 15, 2004 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors
More informationCatalogue Ignitors and power switches for HID
Catalogue 2012 Ignitors and power switches for HID Overview Product overview Ignitor matrix Standards Page 6 Page 7 Page 8 Product information Ignitors and power switches for HID Page 9 Superimposed-pulse
More informationNC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM
NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM Content 1. General 5 2. The products of NC-1000 system 6 3. Mounting of the frame 8 4. Earthing of the frame 8 NC-1000 FIBRE OPTIC
More informationCable entry systems. perfect innovative smart. Cable entry systems
Cable entry systems perfect innovative smart Cable entry systems Control systems engineering Switch cabinet engineering Vehicle engineering Plant engineering Machine construction Electrical installation
More informationRevision 2.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3 Exploded
More informationDS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection
with Flush Process Connection piezoresistive pressure sensor up to independent contacts, configurable optional: analogue output Exprotection (for wire) cooling element up to 00 C nominal pressure ranges
More informationtechnology Live on stage our cables!
Event technology Live on stage our cables! EN Our expertise Our expertise Company Since its foundation in 1926, MUCKENHAUPT & NUSSELT has concentrated on developing and production of cables. We are a special
More informationCARLITE grain orien TEd ELECTRICAL STEELS
CARLITE grain ORIENTED ELECTRICAL STEELS M-3 M-4 M-5 M-6 Product d ata Bulletin Applications Potential AK Steel Oriented Electrical Steels are used most effectively in transformer cores having wound or
More informationEXEL. Ex de. - Double locking system operated by hexagonal-head tool - Double channel electronic ballast - Zones 1, 2, 21, 22. G13 bi-pin lamp holder
EXEL - Double locking system operated by hexagonal-head tool - Double channel electronic ballast - Zones 1, 2, 21, 22 Reinforced polyester resin body G13 bi-pin lamp holder Internal emergency batteries
More informationFlygt Submersible Motor Cables
Flygt Submersible Motor Cables This brochure contains an overview of the Flygt motor cable assortment. The cables are especially designed for submersible use and made of carefully selected materials. The
More informationPROPORTIONAL VALVES Sentronic plus
04GB-06/R0 PROPORTIONAL VALVES Sentronic plus with external pressure supply G / FEATURES Sentronic plus is a highly dynamical -way proportional valve with digital control. Sentronic plus stands for: Digital
More informationDCT 532. Industrial Pressure Transmitter with i²c interface. Stainless Steel Sensor
Industrial Pressure Transmitter with i²c interface Stainless Steel Sensor Accuracy according to IEC 60770: standard: ± 0. % FSO option: ± 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Digital
More informationLevel instruments. Point level measurement - Capacitance switches. Pointek CLS100. 5/10 Siemens FI Overview.
Siemens G 2009 Overview Configuration is a compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam. Benefits
More information