LCD Television Users Guide

Transcription

1 POWER TV STB VCR DVD AUDIO MODE TUNE LIGHT INPUT DVR STATUS SOUND VIDEO RM-C1430 RETURN + TV MUTING GUIDE SUB CH C.C. DISPLAY TV/VCR SUB T. TWIN SLEEP ML/MTS SWAP SELECT LCD Television Users Guide LT-42X899 LT-47X p HDTV V1 V2 V3 V4 V CH + VOL + MENU OK BACK FAVORITE ASPECT TV Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user s guide in a convenient place for future reference. Keep the carton and original packaging for future use. Serial Number: Model Number: LCT A-A 0508TSH-II-IM

2 Table of Contents Warnings Precautions Remote Control TV Basic Controls Key Features Setup Interactive Plug-In Menu Remote Control Functions Return+ TV Favorite Aspect Sound Video Guide SUB CH C.C TWIN Sleep ML/MTS SWAP SELECT Customizing your TV Initial Setup Language Tuner Setup Set Clock Set Lock Code Interactive Plug-in Menu Software Version Auto Demo V-Chip V-Chip Set US TV Ratings Set Movie Ratings Set Canadian Ratings English Set Canadian Ratings French Unrated Closed Caption Closed Caption Reset On/Off Timer Mode On Time Off Time Channel On Volume Picture Adjust Video Status Natural Cinema Theater Pro II x.v.color Color Temp Color Management Dynamic Gamma Smart Picture Digital VNR MPEG NR Smart Sensor Reset Sound Adjust Balance Turn On Volume Volume Limit Optical Out Reset Features Video-5 Input Noise Muting Front Panel Lock Auto Shut Off Quick Start-up Aspect Position Adjustment Illumination Power indicator HDMI Size Control with HDMI Video-1 Audio Video Input Label Key Items Favorite Guide Display Sleep Timer Multi Language/MTS Photo Viewer Connecting Your Devices Programming Your Remote Troubleshooting Specifications Warranty Notes

3 Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT. 1. Operate only from the power source specified on the unit. 2. Avoid damaging the AC plug and power cord. 3. Avoid improper installation and never position the unit where good ventilation is unattainable. 4. Do not allow objects or liquid into the cabinet openings. 5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. Changes or modifications not approved by JVC could void the warranty. * When you don t use this TV set for a long period of time, be sure to disconnect both the power plug from the AC outlet and antenna for your safety. * To prevent electric shock do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. As an ENERGY STAR partner, JVC has determined that this product or product model meets the ENERGY STAR guidelines for energy efficiency. 3

4 Warnings IMPORTANT RECYCLING INFORMATION This product has a fluorescent lamp that contains mercury. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local authorities or for USA, the Electronic Industries Alliance: IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 4

5 Warnings 16) Place the television on a stable, flat surface. Failure to do so can result in the television falling, causing injury. 17) DO NOT allow young children to play around or on the television. Do not hang from the TV. Failure to do so can result in the television falling, causing injury. 18) DO NOT allow young children to play with the plastic bag that came with the television when you unpacked it. Failure to do so can result in suffocation, causing injury. 19) Avoid improper installation and never position the unit where good ventilation is impossible. When installing this TV, distance recommendations must be maintained between the set and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance guidelines shown for safe operation. 200 mm 7 7/8 in 200 mm 7 7/8 in 150 mm 5 7/8 in 150 mm 5 7/8 in 50 mm 2 in 20) Cautions for installation Do not tilt the TV towards the left or right, or towards the back. Install the TV in a corner on the floor so as to keep cords out of the way. The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to allow satisfactory cooling. Have two people remove the TV from the box with the screen facing away from you. It's possible your clothing, (such as a belt buckle or button) may scratch the front of the TV. Do the same when moving the TV to another location. 21) When attaching to a wall, use the optional JVC wall mounting unit. For LT-42X899: JVC-XUF-2637 LCD FLAT WALL MOUNT For LT-47X899: JVCPCM-MS2 TILT/FLAT WALL MOUNT Caution Consult qualified installers. See the included manual on mounting procedures. JVC is not responsible for damages or injuries due to improper mounting. Use with other wall mounting unit is capable of resulting in instability or causing possible injury. 22) Make enough room for inserting and removing the power plug. Place the TV as close to the outlet as possible. The main power supply for this TV is controlled by inserting or removing the power plug. 23) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. 24) When this TV is connected to the wall outlet, it is always on standby even when all the LED lamps are not lit. To shut down the TV, unplug the TV from the wall outlet. 5

6 Warnings FCC Notice: Caution: Changes or modifi cations not expressly approved by party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. We have an important note for customers who subscribe to basic cable services (do not have a separate cable box) and plan to use their JVC TV remote control to select channels. Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is receiving through the RF input), every channel number available from your cable company will appear in your television s Channel Summary and they will all be marked as available for scanning. Even though every channel is detected and appears as available, you will only be able to view those that you specifi cally subscribe to from your cable company. This will likely mean there are blank channels between those channels you wish to scan or surf. We apologize for any inconvenience this may cause but it is important to note that this is not a malfunction of your television. If you want to sequentially scan those channels you subscribe to without blank ones in between, you can contact your cable company for their cable box and remote, or manually deselect them using the edit / skip feature on page 25. 6

7 Precautions Avoiding Temporary Burn-in Displaying fi xed images for extended periods of time can leave a subtle but temporary burn-in image on your screen. To avoid this, mix your viewing pattern. Examples include, but are not limited to the following: Stock-market report bars Shopping channel logos and pricing displays Video game patterns or scoreboards Bright station logos Internet web sites or other computer-style images DVD discs, video tapes, laser discs Broadcast, cable, satellite channels or digital television tuners/converters TV on For example... XYZ TV off XYZ Caring for the Cabinet Normally, light dusting with a soft, non-scratching duster will keep your TV clean. If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly moistened with water. You can add a few drops of mild liquid detergent to the water to help remove spots of oily dirt. DO NOT allow liquid to enter the TV through the ventilation slots. DO NOT use strong or abrasive cleaners on the TV. DO NOT spray liquids or cleaners directly on the TV s surface. DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth. Caring for the Screen The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth. Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen. These will remove the coating layer and cause discolorations. Do not push or hit the screen. This could cause scratches on the screen surface and image distortions. 7

8 Precautions Tidying the cables A cable holder which keeps your connection cables tidy is attached to the back of the stand. Install your TV To prevent the TV from falling, thread the belt through the hole on the back of the standand secure it to the TV rack. Hole Belt and screw (not included) Disconnecting the stand 1) Place the TV face down on a soft cloth on a table. 2) Remove the five screws from the back of the TV. 3) Pull out the stand from the TV. Note: To re-install the stand, reverse the procedure from 3) to 1). 8

9 POWER TV STB VCR DVD AUDIO MODE TUNE LIGHT INPUT DVR STATUS SOUND VIDEO RM-C1430 RETURN + TV MUTING GUIDE SUB CH C.C. DISPLAY TV/VCR SUB T. TWIN SLEEP ML/MTS SWAP SELECT Precautions Package Contents Make sure you have the following. Television x 1 Remote Control x 1 AA Batteries x CH + VOL + + AA Alkaline + AA Alkaline MENU OK BACK FAVORITE ASPECT TV How to clean the frame and stand Frame Your TV has a glossy frame and stand which have protection sheets attached to them. Peel them off before use, but only after the TV has been properly placed. Take care with handling the glossy frame and stand because these surfaces are delicate. If the glossy frame or stand becomes dirty, first dust it off, then wipe it softly with a cleaning cloth. If you wipe without dusting off, you may damage it. Stand Insert the batteries Use two AA batteries (included). Place the " " end in the unit first, making sure the "+" and " " markings are correct. Place the " " end in the unit first. If this symbol is shown, it is only valid in the European Union 9

10 Remote Control The following pages gives you a brief description of each button s function. For more detailed information on the remote control buttons, see pages This remote can also control up to four other devices. See page POWER Turns the TV on or off. POWER TV STB VCR DVD AUDIO MODE INPUT V1 V2 V3 V4 V TUNE 0 RETURN + TV Switch between TV / STB / VCR / DVD / AUDIO devices. See page 55. Switch between devices connected to Video-1, 2, 3, 4 and 5. Change channels. Input remote codes. See page 55. TV STB VCR DVD AUDIO MODE INPUT V1 V2 V3 V4 V TUNE 0 RETURN + TV CH + VOL + TUNE RETURN + TV CH + VOL + Lets you decide the input channel and select it. After pressing the remote 0-9 buttons, press TUNE. Lets you go back to the previously selected channel. See page 20. Move sequentially through the channels. Raise or lower the volume. MENU LIGHT MUTING FAVORITE FA F AVO V OK ASPECT BACK DVR STATUS SOUND VIDEO GUIDE SUB CH C.C. DISPLAY TV/VCR SUB T. TWIN SLEEP ML/MTS A AS LIGHT All remote control buttons are illuminated, except for the LIGHT button. SWAP SELECT MUTING MENU Turns the TV volume to 0. Press again to restore the volume. Used to access the TV s onscreen menus. See page 24. RM-C1430 TV OK Used to navigate through the TV s onscreen menus. F BACK Go back to a previous onscreen menu or to correct a mistake. 10

11 Remote Control FAVORITE Save your favorite channels. See page 20. DVR ASPECT Change the aspect ratio of the image on your TV screen. See page 20. POWER STAT SOUND ATUS VIDEO GUIDE SUB CH TV/VCR Change the sound mode of the MaxxAudio function. See page 21. Choose different display settings according to personal preferences. See page 21. Programming information. (Digital channels only). See page 21. Used to select sub channels. (Digital channels only). See page 21. TV STB VCR DVD AUDIO MODE INPUT V1 V2 V3 V4 V TUNE 0 RETURN + TV CH + VOL + C.C. SUB T. Use the C.C. (Closed Caption) button to select the mode of closed caption. See page 22. MENU LIGHT OK MUTING BACK DISPLAY TWIN SLEEP View current channel information. Activate the split screen option. Choose how long the TV will stay on before turning off. See page 23. FAVORITE DVR STATUS SOUND VIDEO ASPECT GUIDE SUB CH C.C. DISPLAY TV/VCR SUB T. TWIN SLEEP ML/MTS SWAP SELECT ML/MTS Listen to a program in stereo, mono or another language (SAP). (Depending on availability in the program). See page 23. RM-C1430 TV SWAP Exchange the channel (or input) displayed in the split screen window for the main screen image. SELECT Select the picture (channel) while viewing split screen. * See page 56 for buttons that control your external devices. 11

12 TV Basic Controls Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television. Some of the connection terminals are color coded for easy connection with the proper cables. Front Panel Illumination POWER LED Side Panel OK BACK INPUT MENU C H VOL Input Change the input MENU Used to access the TV s onscreen menus. +CH Move sequentially through the channels. +VOL Raises or lowers the volume. POWER Turn the TV on or off. POWER Rear Panel For governing the use of the IR IN terminal, consult your dealer. F Antenna / Cable IR IN 75 Ω (VHF/UHF) 12

13 RS-232C INPUT 5 INPUT 4 INPUT 3 FOR HDMI 1 AUDIO OUT VIDEO R AUDIO L PR Y PR VIDEO R AUDIO L PR Y PR S-VIDEO VIDEO R AUDIO L R AUDIO L R AUDIO L DIGITAL AUDIO OPTICAL OUT PC IN (D-SUB) PHOTO VIEWER INPUT 5 INPUT 2 INPUT 1 TV Basic Controls G Audio System Digital Camera J DIGITAL AUDIO OPTICAL OUT PC IN (D-SUB) PHOTO VIEWER INPUT 5 INPUT 2 INPUT 1 A A A, B PC I DVD Player RS-232C For more detailed information, see pages For governing the usage of the RS-232C terminal, consult your dealer. INPUT 5 VIDEO R AUDIO L E STB (Digital Cable, satellite) Tuner Box Y PR PR C, E INPUT 4 VIDEO R AUDIO L Video Camera Y PR PR C, D, E INPUT 3 FOR HDMI 1 S-VIDEO VIDEO R AUDIO L R AUDIO L * This is used when you are using a DVI device. Game Console AUDIO OUT R AUDIO L H A, B, C, D, E, F, G, H, I, J: Types of connections. Audio System 13

14 TV Basic Controls Device Side With Cables TV Side Good Best VIDEO and AUDIO A B C D E HDMI HDMI Cable INPUT 1, 2 or 5 DVI + Audio Component Video + Audio S-Video + Audio Composite Video + Audio DVI HDMI Cable, Audio Cable INPUT 1 + HDMI ANALOG AUDIO Component Video + Audio INPUT 3 or 4 S-Video Cable, Audio Cable INPUT 3 + AUDIO Input Composite Video + Audio INPUT 3, 4 or 5 F Antenna / Cable (VHF / UHF) RF Cable 75Ω (VHF / UHF) Good Best AUDIO G H OPTICAL INPUT OPTICAL AUDIO Cable AUDIO INPUT (L / R) Audio Cable DIGITAL AUDIO OPTICAL OUT AUDIO OUT (L / R) 14

15 TV Basic Controls Compatible Signal Input HDMI (Digital) SD: 480i, 480p HD: 1080/60p / 1080/30p / 1080/24p / 1080i / 720p Audio L/R (Digital) Notes See page 52. Input DVI (Digital) SD: 480i, 480p HD: 1080/60p / 1080i / 720p Audio L/R (Analog) See page 51. Input Component (Analog) SD: 480i, 480p HD: 1080i, 720p Audio L/R (Analog) See page 49. Input S-Video (Analog) Audio L/R (Analog) Input Composite (Analog) Audio L/R (Analog) See page 49. ATSC (Digital) NTSC (Analog) Clear QAM (Digital) See page 48. Output Audio L/R (Digital) (PCM or Dolby Digital) See page 50. Output Audio L/R (Analog) (Fixed) See page

16 TV Basic Controls PC Device Side With Cables TV Side I PC IN (D-SUB) D-SUB + Audio (3.5 mm stereo mini jack) D-sub (15 pin) Cable + Audio Cable PC IN (D-SUB) + INPUT 5 AUDIO Input USB Device Side With Cables TV Side J USB USB Cable PHOTO VIEWER 16

17 Key Features Your JVC TV is equipped with many features. Here are some key features highlighted in detail. 1 Stunning picture quality via 1920x1080 Full HD panel. Dynamic Gamma and Color Management give further fi ne tuned picture reproduction. Smart Picture adjusts the best possible picture quality automatically scene by scene based on the incoming signal from any source! 2 120Hz Clear Motion Drive III technology displays 120 frames per second (120Hz) in the same time a conventional LCD TV displayes 60 frames (60Hz). You will be able to reduce blurring or image trails when there is rapid or complex movement across the screen. On Off i-clear Motion NR Provides 3D noise reduction for moving images by applying the high-precision motion prediction techniques. Real 12bit Driver JVC s new bit extention technology takes 8-bit images and turns them into images with 12-bit precision. It produces smooth, natural signal gradations without sacraficing the original HD signal. 3 JVC exclusive twin oblique cone speakers provide excellent TV sound quality. MaxxAudio sound provides you with 4 different settings based on the program you are watching. The equalizer will fi ne tune your listening preferences. 4 Full connectivity with 3 HDMI, 2 Component, 1 S-video and others. The variety of connections are explained on pages 47 to 51. HDMI CEC (see page 42) x 3 x 2 x 1 5 Aspect mode will show every pixel you are getting in High Defi nition. The Native mode will show 100% of 1080p. Full with slight overscan. Panorama and Cinema will fi ll the screen with various aspect settings. See page Photo Viewer allows you to enjoy your digital pictures stored on your USB Mass Storage Class devices. See page

18 BACK MENU MENU Setup Interactive Plug-In Menu When you turn on your TV for the first time, the Interactive Plug-In Menu appears automatically. These menus will help you setup your TV with basic information for Language, Time and Tuner Setup. POWER 1) Turn on the TV POWER MODE TV STB VCR DVD AUDIO INPUT V1 V2 V3 V4 V ) Set the language Interactive Plug-In Menu > Language/Langue/Idioma 1 Select a language Language/Langue/Idioma English Set OK TUNE 0 RETURN + TV Select Operate Exit CH + VOL + 2 Select Set LIGHT MUTING OK MENU OK BACK FAVORITE FA F AVO V ASPECT DVR STATUS SOUND VIDEO GUIDE SUB CH C.C. DISPLAY TV/VCR SUB T. A AS C 3) Set time attribute Interactive Plug-In Menu > Set Clock Mode Manual Channel Time : 3 Move to next menu 1 Change settings TWIN SLEEP ML/MTS Time Zone D.S.T Start Clock Pacific Off OK SWAP SELECT Operate Back Exit RM-C1430 TV Select OK 2 Select an item 3 Select Start Clock 4 Move to next menu 18 Mode Channel Time Time Zone D.S.T. Auto (Analog), Auto (Digital), Manual Only can select when Mode is in Auto (Digital) Only can select when Mode is in Manual Choose the time zone you live in. Changes the clock automatically for daylight saving time. On / Off

19 BACK MENU Setup Interactive Plug-In Menu (Continued) CH + VOL + LIGHT MUTING 4) Set TV attribute Interactive Plug-In Menu > Auto Tuner Setup Tuner Mode Cable Scan Mode Auto 1 Change settings MENU OK BACK Start OK Operate Back Exit FAVORITE FA F AVO V DVR STATUS SOUND VIDEO A AS ASPECT GUIDE Select 2 Select an item 3 Select Start SUB CH C.C. DISPLAY TV/VCR SUB T. OK TWIN SLEEP ML/MTS SWAP SELECT 4 Start scanning channels RM-C1430 TV Tuner Mode Scan Mode Choose Air (antenna), Cable or Skip Auto, STD, HRC, IRC * If you use a set top box (satellite or cable box), press Exit to skip this step. Cable Users: After your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 2, 3 or 4 in the auto tuner memory. This is normal. Thank you! Setup is now complete 19

20 Remote Control Functions RETURN + TV RETURN+ TV Has three functions. Return Returns to the channel viewed just before the channel currently onscreen. Return+ Lets you program a specific channel to return to while scanning through the channels using the CH + button as you memorize the channel. TV Returns to the TV mode as you are watching a video, DVD, etc. Note: Press the RETURN+ TV and hold for three seconds. This will memorize the current channel to return to while you scan through the other channels. To cancel, press and hold the RETURN+ TV button for three seconds. DVR FAVORITE FAVORITE Allows you to save channels you like so you can view them easily. First you must register the channels you like. Notes: Go to the channel you want to register and press the FAVORITE button for three seconds. To view your favorite channels, press FAVORITE. Move π to select your channel and press OK. To erase your favorite channels, press FAVORITE. Move π to select your channel and press. Both analog and digital channels can be registered. The newest channel you registered will appear at the top of the list. ASPECT ASPECT Allows you to adjust the way the image appears on your TV based on the format that is being received. Panorama / Cinema / Full / Panorama Zoom / Cinema Zoom / Full Native / Regular / Slim See page 40. Note: You can select the aspect mode by pressing the ASPECT button. 20

21 Remote Control Functions DVR STATU SOUND SUB CH SOUND Change the sound mode of the MaxxAudio function. High / Mid / Low / Off Notes: You can choose the different sound modes by pressing the SOUND button. TATUS VIDEO CC VIDEO Allows you to choose different picture settings according to personal preferences. You can access this feature for each input (TV, V1, V2, V3, V4, V5). Standard / Dynamic / Theater / Game / Memory-1 / Memory-2 Note: You can select Video Status by pressing the VIDEO button. See page 34. GUIDE DISPLAY GUIDE You can view program information for Digital Channels. Note: When the program information is not being broadcast, the correct information will not be displayed. The GUIDE will not show the correct time and date depending on the Time Zone and D.S.T. settings. See page 43. SUB CH TV/VCR TWIN SUB CH Digital broadcast sometimes offers sub channels. By using the SUB CH button, you can select a sub channel easily. For example, to move to sub channel : 1) Press 1, 2 and 3 in order 2) Press the SUB CH button 3) Press 4 and 5 in order 4) Press the TUNE button 21

22 Remote Control Functions C.C. SUB T. SLEEP C.C. (Closed Caption) Use the C.C. (Closed Caption) button to select the mode of closed caption. At first, select TV, STB or VCR mode to use the closed caption function. Notes: You can change the mode by pressing the π buttons and press OK. Smart Caption will appear when you press the MUTING button only on channels where the broadcast contains closed captioning. When you select On, it will be the mode selected in the Closed Caption Menu. See page 32 when you set the caption/text mode. If you are in PC mode or use HDMI, C.C. cannot be used. TWIN SWAP TWIN Activate the split-screen option by pressing TWIN on the remote control. The channel (or input) you were watching before pressing TWIN will appear on the left, the new channel will appear on the right. To turn split-screen off and return to normal television viewing, press TWIN again or press the BACK button. At first, select TV mode to use the TWIN function. TV MAIN SCREEN PICTURE Video-1 SPLIT SCREEN PICTURE Notes: You can enter the TWIN mode when you are in a single screen. Split screen functions will not work when you are receiving a 1080/30p and 1080/24p signal. Split screen functions will not work with locked channels or channels blocked by V-Chip ratings limits. A black screen will display instead. The aspect of Main Screen Picture becomes 16:9 when you input the picture of 480p, 720p, 1080i and 1080p from the component terminal, HDMI terminal and digital channels. When you are in TWIN mode, you cannot change the aspect ratio. When you press the MENU button in TWIN mode, the menu screen will not appear. When you are in PC mode, TWIN, SWAP and SELECT cannot be used. 22

23 Remote Control Functions SLEEP SELECT SLEEP Allows you to choose how long the TV will stay on before turning off. Notes: You can change the interval by pressing the π buttons and press OK. You can set the interval at 0, 15, 30, 45, 60, 90, 120 and 180 minutes. 60 seconds before the TV turns off, a message will appear and it will count the remaining time. If you want to extend the time, press the SLEEP button and you can change the interval. If you don t press the SLEEP button, within 60 seconds the TV will turn off. ML/MTS ML/MTS Allows you to listen to a program in stereo, mono sound or another language (SAP) if available. First you must set the MODE to TV on your remote. Notes: When you are receiving a digital broadcast, if there are other languages, you can change the language by pressing the ML/MTS button. Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo mode even if a certain broadcast is in mono sound only. Choose the mono setting to reduce excessive noise on a certain channel or broadcast. MTS is unavailable if your television s Input source is (V1, V2, V3, V4, V5). ML/MTS will not work when you are using HDMI or an external input. SWAP S SWAP You can exchange the channel (or input) displayed in the split screen window for the main screen image by pressing the SWAP button. At first, select TV mode to use the SWAP function. Notes: It will only work in TWIN mode. SELECT SELECT With SELECT, you can select the picture (channel) while viewing split screen. When you press SELECT button, the channel banner on the top will be highlighted. Each press of SELECT will shift the channel. The sound outputs from the screen you have selected. 23

24 BACK BACK MENU MENU > Set Clock Mode Channel Time Time Zone D.S.T Auto (Digital) : Pacific Off Start Clock Customizing your TV POWER 1) Display the menu bar MODE TV STB VCR DVD AUDIO MENU INPUT V1 V2 V3 V4 V ) Display the desired menu TUNE 0 RETURN + TV CH + VOL + Aa Initial Setup Language English Tuner Setup Set Clock Set Lock Code Interactive Plug-in Menu Software Version Auto Demo Operate Back Exit OK Select OK Select LIGHT MUTING MENU FAVORITE FA F AVO V OK AS ASPECT BACK DVR STATUS SOUND VIDEO GUIDE SUB CH C.C. DISPLAY TV/VCR SUB T. TWIN SLEEP ML/MTS A C 3) Change or adjust the setting Initial Setup Language Tuner Setup Set Clock Set Lock Code Interactive Plug-in Menu Software Version Auto Demo Select English Operate Back Exit Aa OK Enter Select OK Change / Adjust SWAP SELECT Change or adjust the setting using the pop-up menu. Select Enter English English RM-C1430 TV OK OK French Spanish (Example: Language) Note: Depending on the situation (analog channels, digital channels, video signal format, external inputs, etc.), some items will be displayed in gray and can not be selected. To enter an item s sub menu To the previous screen Select Enter OK OK (Example: Set Clock) 4) Close the menu BACK MENU 24

25 BACK MENU Customizing your TV Initial setup Aa Initial Setup Language Tuner Setup Set Clock Set Lock Code Interactive Plug-in Menu Software Version Auto Demo English Operate Back Exit Select Language Allows you to change the TV s onscreen menu languages to English, French or Spanish. Tuner Setup Auto Tuner Setup If you skipped this step in the initial setup or your setup has changed, you can redo your setup in this menu. Air / Cable Channel Summary >> Channel Summary Ch No. Scan Station CH-1 CH-2 CH-3 Channel summary allows you to customize the line-up of channels received by your TV. Regarding analog channels, you can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels. Regarding digital channels, the only channels that will appear are the ones that are broadcasting. 5 Select Operate Back BACK Exit MENU The Channel summary screen will now be displayed with the channels set to scan marked with an. Regarding analog channels, you can delete channels from the scan by removing the. If any channels were missed during auto tuner setup and you wish to add them, you may by placing an next to the channel number. Note: The number of a digital channel may change, depending on the time of some broadcastings. If this channel existed and now has disappeared, the lock channel or scanned channel mark by the channel summary for that channel will be cancelled. 25

26 Customizing your TV Initial setup (Continued) Channel Summary (Continued) >> Station You can set the channel label by selecting the Station column. Channel Set Reset Select Operate Back BACK Exit MENU Notes: You can use characters for: Alphabet, numbers, marks and spaces CH-1 Please enter lock code by 10 key pad. CH-2 CH-3 You can block access to a channel by activating the channel lock. Select the column. Find Channel Allows you to add channels by pressing the 10 key pad. Digital Antenna Level This is a bar graph displaying the state of the Digital Antenna Level. Tuner Diagnostic (Service Use Only) Set Clock The set clock function is described on page 18 as the Interactive Plug In Menu. You can choose to set the clock automatically or manually. 26

27 Customizing your TV Initial setup (Continued) Set Lock Code Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes preset with a lock code of You may change the code to any four-digit number you wish. Notes: After a power interruption you must reset the lock code. Write your lock code number down and keep it hidden from potential viewers. If you forget the lock code, a new code may be set using the steps listed above. Interactive Plug-In Menu If you skipped this step in the initial setup or your setup has changed, you can redo your setup in this menu. The Interactive Plug-in Menu is described on page 18. Software Version You can confirm the TV s software version. Auto Demo Auto Demo explains this TV s features to you. Notes: Please complete the Initial Setup menu first. The Auto Demo mode will start automatically when the Interactive Plug-In Menu is completed. If you press any button on the television or remote, with the exception of POWER or MENU, the Auto Demo mode will stop for 30 seconds. After 30 seconds have passed with no operation, the Auto Demo mode will start again. If you want to turn off the Auto Demo, press the MENU button. 27

28 BACK MENU Customizing your TV V-Chip Aa V-Chip V-CHIP Off Set US TV Ratings Set Movie Ratings Set Canadian Ratings English Set Canadian Ratings French Unrated View Operate Back Exit Select Notes: V-CHIP will not work with video signals from VCRs, DVD players, Blu-ray or camcorders connected to the TV. (For Canadian viewers only): V-CHIP is designed specifically for the US and may not work properly in Canada. Advanced V-Chip Rating and Advanced Canadian Rating menus may be displayed sometimes. This depends on the broadcast you are receiving. When entering the password When you try and access the V-Chip menu, Please input password will appear. Press the 0 button four times on your remote to access the V-Chip menu for the first time. g Set Movie Ratings Set Canadian Ratings Please English enter lock code by 10 key pad. Set Canadian Ratings French Unrated View When you lock or unlock channels You can lock or unlock ratings as shown below. > Set US TV RATINGS 1 Select TV MA TV 14 TV PG TV G TV Y7 TV Y V/FV S L D OK 2 Lock / Unlock Note: Once a channel has been unlocked, it will remain unlocked until the television is turned off. 28

29 Customizing your TV V-Chip (continued) V-Chip Allows you to block channels or content that you deem inappropriate for children. On / Off Set US TV Ratings This setting is based on the US ratings system. TV Y Appropriate for all children. Intended for all children 2-6 years old. TV Y7 Appropriate for older children. Intended for children 7 years or older. TV G General Audience. Suitable for all ages. TV PG Parental Guidance Suggested. Suitable for all ages with parental guidance. TV 14 Parents Strongly Cautioned. Intended for viewers 14 years or older. TV MA Mature Audiences Only. Intended for viewers 18 years or older. Viewing Guidelines: In addition to the above ratings, you can also block or allow more specifi c content. (Except for unrated programming). A program can contain any or all of the following: V/FV VIOLENCE/FANTASY VIOLENCE S SEXUAL CONTENT L Strong LANGUAGE D Suggestive DIALOG 29

30 Customizing your TV V-Chip (continued) Set Movie Ratings This setting is based on the US Motion Picture Association of America (MPAA) ratings system. NR Not Rated. Any type of programming that does not contain a rating. G General Audience. Suitable for all ages. PG Parental Guidance Suggested. Suitable for all ages with parental guidance. PG 13 Parents Strongly Cautioned. Intended for viewers 13 years or older. R Restricted. Not recommended for viewers 17 years without parental guidance. NC-17 No One Under 17. Not intended for viewers 17 years or younger. X No One Under 18. Not intended for viewers 18 years or younger. 30

31 Customizing your TV V-Chip (continued) Set Canadian Ratings English This setting is based on the Canada rating system. E Exempt. Any type of programming that does not contain a rating. C Intended for children. Suitable for all ages. C8+ Intended for children over 8 years old. Suitable for all ages over 8 years. G General Audience. May contain material not suited for younger viewers. PG Parental Guidance. May contain material not suited for younger viewers. Parents may consider some content not appropriate for children 8-13 years old Years or Older. Parents strongly urged to use their discretion in allowing viewing by persons under Adult. Intended for viewers 18 years or older. Set Canadian Ratings French For instructions on Set Canadian Ratings French, please see page 31 in the French user s guide. Unrated You can block programs that are not rated. Unrated programming refers to any programming which does not contain a rating signal. Programming on television stations which do not broadcast rating signals will be placed in the Unrated Programming category. Examples of Unrated programs: Emergency Bulletins Locally Originated Programming News Political Programs Public Service Announcements Religious Programs Sports Weather Some Commercials Note: TV programs or movies that do not have rating signals will be blocked if the unrated category is set to Block. 31

32 BACK MENU Customizing your TV Closed Caption Aa Closed Caption Page 1/2 Closed Caption Off Type Analog Service Digital Service Appearance Mode Font Size Font Style Auto CC1 1 Auto Auto Auto Operate Back Exit Select Closed Caption Allows you to select the mode of the closed caption. First you must set the MODE to either TV, STB or VCR on your remote. On / Smart Caption / Off Smart Caption Will display closed captioning when you press the MUTING button only on channels where the broadcast contains closed captioning. Type Auto: Shows closed caption a priority for digital channels over analog channels. It is set automatically. Advanced: Shows only the digital closed caption. Basic: Shows only the analog closed caption. Analog Service Choose the feature that you like for analog Closed Captioning. Digital Service Choose the feature that you like for digital Closed Captioning. Appearance Mode Auto / Manual Font Size Choose how big the text appears in Closed Captioning. Font Style Choose the style of the font in Closed Captioning. Text / Edge Opacity Choose how translucent the text appears in Closed Captioning. Background Opacity Choose how translucent the background box color for the Closed Captioning text. Text Color Choose the color of the text in Closed Captioning. Edge Color Choose the color of the border of the background box color for the Closed Captioning text. Background Color Choose the background box color for the Closed Captioning text. 32 Reset Resets all adjustments except for Closed Caption at once to the default settings.

33 BACK MENU Customizing your TV On/Off Timer Aa On/Off Timer Mode On Time Off Time Channel On Volume No 7 : 00 AM 10 : 00 AM 2 Current Set Operate Back Exit Select Notes: In order for the On/Off Timer to work, the clock must be set. After a power interruption, the timer settings must be reset. If your clock is not set, "PLEASE SET CLOCK FIRST!" will appear on the screen. Mode You can select timer frequency. No / Once / Everyday On Time You can set the time you want the television to turn itself on. Off Time You can set the time you want the television to turn itself off. Channel You can set the channel of when On Timer is on. Note: The On/Off Timer cannot be set to locked or guarded channels. On Volume You can set the volume level when On Timer is on. 0-50: Volume level Current: Start with current volume level. Set Set all settings of On/Off Timer menu. Note: If you are out from On/Off Timer menu without pressing Set, all settings go back to previous setting. 33

34 BACK MENU Customizing your TV Picture Adjust Aa Picture Adjust Page 1/2 Video Status Natural Cinema Standard Auto Tint Color Picture Bright Detail Energy Saver mode Theater Pro II Operate Back Exit Select Video Status Choose different display settings according to personal preferences. You can use this feature with TV, V1, V2, V3, V4 and V5. Standard Resets the picture display to the factory settings. Dynamic Gives a vivid picture with better contrast when viewing in a brightly lit room. Theater Gives a rich, film-like look to video when viewing in a dimly lit room. Game Used for when you are playing video games connected to your TV. Memory-1 / Memory 2 You can memorize your favorite picture settings (Tint, Color, Picture, Bright, Detail, Energy Saver Mode) Notes: Each mode is memorized for each input (TV, V1, V2, V3, V4, V5) connected to the TV. Each video status setting has a separate memory for HD (1080i/1080p/720p) and SD (480p/480i) video signal. Each video status can be chosen along with your favorite picture settings (Tint, Color, Picture, Bright, Detail and Energy Saver Mode). When an HD or SD signal is displayed, your HD or SD settings are recalled for the video status you are using. Allows you to change and adjust the way the picture appears on your television. Tint Allows you to adjust the levels of red and green on your TV. Color Allows you to make all the colors on your TV appear more vivid or subtle. Picture Allows you to adjust the level of black and white on your TV giving you a darker or brighter picture overall. Bright Allows you to adjust the overall brightness of the TV. Detail Allows you to adjust the level of fine detail on your TV. Energy Saver Mode Allows you to adjust the brightness of the internal lamp which effects the overall brightness of the TV. 34

35 Customizing your TV Picture Adjust Natural Cinema Allows you to compensate for image blurring when the original video you are watching was shot at 24 frames/sec, and is broadcast at 30 frames/sec. This conversion error is known as TELECINE. Auto / On / Off Notes: When you are receiving a 480p, 720p, 1080p signal, or in PC mode, Natural Cinema cannot be selected. Natural Cinema is only applied for SD 480i and HD 1080i signals. Theater Pro II It is possible to use Theater Pro II menu only when the Video Status mode is set to Theater, Memory-1 or Memory 2. It adjusts the detailed picture settings. Theater Pro II Menu DSD Detail H.Sharp V.Sharp DSD Noise Control Color Temp. (High, Low) Color Balance *Color Mngmt. (Red, Yellow, Green, Cyan) Axis *Color Mngmt. (Red, Yellow, Green, Cyan) Tint *Color Mngmt. (Red, Yellow, Green, Cyan) Color *Color:Bright Area *Color:Dark Area Reset Resets all Theater Pro II menu picture adjustments. Settings Shows the edge of the picture clearly Emphasizes the edge of the picture horizontally Emphasizes the edge of the picture vertically Reduces picture noise Adjusts the screen (red, blue or green) color Adjust the blue color naturally Select a corrected color Adjusts the tints of (red, yellow, green or cyan) Adjusts the color of (red, yellow, green or cyan) Adjusts the picture color of the bright areas Adjusts the picture color of the dark areas * These Theater Pro II menus cannot be selected when Color Management is OFF. See page 36. x.v.color This makes full use of the display s capabilities to produce the perception of depth-of-field and texture. Auto / On / Off x.v.color and are trademarks. Color Temp Allows you to change how strong or dull the colors appear. High - Bluish picture Low - Reddish picture 35

36 Customizing your TV Picture Adjust (continued) Color Management Allows you to compensate for dull colors to ensure dull colors are reproduced with natural hues. On / Off Dynamic Gamma Allows you see more detail in very dark or bright areas so these areas don t appear muddied. Normally, this feature should be left On for optimum picture quality. On / Off Smart Picture Allows you to adjust the brightness level automatically to a level suitable for what you are watching. On / Off Digital VNR This function can be selected to change the effect of Digital VNR (Video Noise Reduction). Auto / Max / Min / Off MPEG NR This function effects the block noise removal and mosquito NR (Noise Reduction) simultaneously. Max / Min / Off Note: When you are receiving digital channels, block noise removal will have no effect. Smart Sensor This function automatically adjusts the brightness on your TV according to the amount of light in the room. Display / On / Off Display Leaf icon will appear on your TV screen when Smart Sensor brightness adjustment occurs. The leaf icon will appear a maximum of 6 leaves. Reset Resets all picture adjustments at once to the default settings, except for Video Status and Natural Cinema. 36

37 BACK MENU Customizing your TV Sound Adjust Aa Sound Adjust Page 1/2 MaxxAudio Low MaxxBass MaxxTreble MaxxStereo MaxxVolume Balance Off Operate Back Exit Select MaxxAudio improves sound performance with four sound features (MaxxBass, MaxxTreble, MaxxStereo and MaxxVolume). High / Mid / Low / Off Allows you to change and adjust the four sound features on your television. MaxxBass Compensates for low frequencies and widens the frequency band. MaxxTreble Compensates for high frequencies and widens the frequency band. MaxxStereo Expands the stereo sound naturally. MaxxVolume Maintains a uniform sound volume even if the sound becomes too loud all of the sudden (during commercial breaks, etc.). On / Off Note: Adjustment made to the four sound features (MaxxBass, MaxxTreble, MaxxStereo and MaxxVolume) will be stored in the selected MaxxAudio setting. MaxxAudio is a registered trademark of Waves Audio Ltd. in the USA, Japan and other countries. Balance Adjust the level of sound between the TV s left and right speakers with the balance setting. Turn On Volume Turn On Volume allows you to set the volume level when you turn the TV on. Volume Limit Volume Limit allows you to set the maximum volume level. 37

38 Customizing your TV Sound Adjust (continued) Optical Out You can select the optical digital sound output as PCM or DOLBY DIGITAL when your TV is connected to an amplifier that has a DOLBY DIGITAL decoder. If you select DOLBY DIGITAL, you can enjoy listening to 5.1ch sound when watching digital broadcasts. This only applies to digital channels. Notes: Optical Out can be used for both digital and analog channels. If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don t select PCM, it cannot output the sound from the speakers. For connecting an amplifier using the optical output, see page 50. Manufactured under license from Dolby Laboratories. "Dolby", and the double-d symbol are trademarks of Dolby Laboratories. Reset Resets all sound adjustments at once to the default settings, except for MaxxAudio. 38

39 BACK MENU Customizing your TV Features Aa Features Page 1/2 Video-5 Input Noise Muting Front Panel Lock Auto Shut Off Quick Start-up Aspect Position Adjustment HDMI On Off Off On Full Operate Back Exit Select Video-5 Input Allows you to choose the signal type you wish to receive that you have connected to Video-5 Input. HDMI / D-sub / Composite Noise Muting This feature inserts a blank black screen over channels which are not broadcasting or are too weak to be received clearly. On / Off Front Panel Lock This allows you to lock the keys on the side of the TV. On / Off Auto Shut Off Auto Shut Off will work when there is no signal and there is no TV operation for 10 minutes. Auto Shut Off will not work while you are receiving a signal, even though there is no TV operation for 10 minutes. On / Off Note: If the channel that you have on does not receive a signal for more than one minute, the blinking text No Program or Weak Signal Auto shut off in 9 min. appears on the screen, and starts the countdown. If no signal is being received within 10 minutes, the TV shuts itself off. Quick Start-up This allows you to quickly start the TV by skipping over the JVC logo on the TV screen when you press the Power button. On / Off 39

40 Customizing your TV Features (continued) Aspect Allows you to adjust the way the image appears on your TV based on the format that is being received. Panorama - When watching a 4:3 aspect picture it is stretched to fit the dimensions of the 16:9 aspect screen. Cinema - This ratio zooms in on the center part of a 4:3 aspect picture, blowing it up proportionally to fill the 16:9 screen. Full - When watching a 4:3 aspect picture, it is stretched to fit the dimensions of the TV. When watching a 16:9 aspect picture, it displays 95% of the ratio. Panorama Zoom - When watching a High-Definition 16:9 aspect picture it is stretched to eliminate the black side bars. Cinema Zoom - This ratio zooms in on the center part of a High-Definition 16:9 aspect image to eliminate the black surrounding bars. Full Native - This ratio displays 100% of the ratio. Normally, all aspects except for Full Native display about 95%. Regular - When watching a 4:3 aspect picture without modifying the original picture to fit the dimensions of your 16:9 screen. Black bars will appear along the picture s sides. The picture will be centered within the boundaries of the 16:9 screen. Slim - This aspect mode shrinks the screen of a 16:9 broadcast to 4:3. There are some programming that is already stretched by mistake at broadcasting companies, so this mode corrects it. Black side bars will appear. Notes: Depending on the signal format, some aspect modes are unavailable. Slim can only be displayed when the signal is ATSC (720p, 1080i) or HD (720p, 1080i, 1080p). Full Native can only be displayed when the signal is ATSC (1080i) or HD (1080i, 1080p). If the television receives a 16:9 signal from your HDMI device, the aspect mode will turn to Full automatically. If the television receives a 4:3 signal from your HDMI device when you are in Full aspect mode, it will return to aspect mode you chose. If you change the aspect mode after the television changed it to Full automatically, the television will change to the aspect mode you choose. It also turns to Full automatically when the TV receives an HD (1080p, 1080i or 720p) signal. You can access the aspect modes using the buttons on the side of the TV, by using the MENU button, then CH + button. You can select Regular or Full in PC mode. 40

41 Customizing your TV Features (continued) Position Adjustment Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama or cinema. > Position Adjustment Operate Back Exit Select BACK MENU Notes: To reset the adjustment to the center, press the OK button. When the arrow disappears, while you are adjusting the position, the position is at its maximum limit. If you select Regular, Slim, Full or Full Native size with aspect or Multi Screen, position adjustment option is not selected. When you change the screen size, perform the position adjustment again. Position adjustment allows you to adjust the screen position vertically and horizontally when the aspect is set Panorama Zoom or Cinema Zoom for 1080p, 1080i and 720p signals, or when PC mode is set. It is also possible to use Position Adjustment when you are in PC Mode. Illumination Allows you adjust the brightness of the illumination on the front of the TV. High / Low / Off Power Indicator Allows you adjust the brightness of the POWER LED on the front of the TV. High / Low / Off HDMI Size The HDMI Size menu can only be selected when an HDMI 480p picture signal is being input to the HDMI terminal. This option adjusts the position when an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of HDMI 480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted by selecting Auto, Size1 or Size2. Note: You can select Auto only when the signal is 480p for HDMI. When you select Auto, the television will select "Size1" or "Size2" automatically. 41

42 Customizing your TV Features (continued) Control with HDMI If you use a HDMI CEC compatible device, set this setting to On. HDMI CEC (Consumer Electronics Control) allows the TV to connect and control multiple HDMI CEC enabled devices with a single remote. CEC (Consumer Electronics Control) is an optional protocol used in HDMI. HDMI CEC on this TV is compliant with High-Definition Multimedia Interface Specification. The TV does not support HDMI CEC functions that are not listed below. The TV does not guarantee to support use of all HDMI CEC enabled devices. Devices that are not enabled to HDMI CEC cannot be controlled with this TV. Control the TV using the HDMI CEC enabled device Turn the TV on and switch to the video source of the operating device. Switch to the video source of the operating device. Turn the TV off with the HDMI CEC enabled device you are viewing. For operating instructions of the device, refer to the device s manual. Control the HDMI CEC enabled device using the TV Turn off the operating device by turning off the TV. Some device may not support this function. For more details refer to the device s manual. Send status of the TV to the HDMI CEC enabled device When switching the TV s external input or channel. When switching the TV s menu language. Information regarding behavior of the device when status is received, refer to the external device s manual. If HDMI CEC does not work correctly: When HDMI CEC enabled device is connected to INPUT1, INPUT2 or INPUT5 with an HDMI cable, you may not be able to control TV s external input. To solve the problem set HDMI CEC to Off. Video-1 Audio Set to Digital or Auto for HDMI devices, or Analog or Auto for DVI devices for INPUT1. (Not available for INPUT2 and INPUT5) 42 Video Input Label Allows you to label all the devices you have connected to the TV that use the VIDEO-1, 2, 3, 4 and 5 inputs. VCR / DVD / Blu-ray Disc / PVR / D-VHS / STB / SAT / AMP / GAME / CAM / DISC Reset Resets all Video Input Label settings.

43 BACK MENU Customizing your TV Key Items Aa Key Items Favorite Guide Display Sleep Timer Multi Language/MTS Off 0 min. Operate Back Exit Select Favorite The Favorite button allows you to select your favorite channels easily. First, you must register the channels that you like. See page 20. Guide You can view program information. Notes: The GUIDE function will work when you are receiving digital program only. The GUIDE will not show the correct time and date if you have not performed the set clock function on your television. When the program information is not being broadcasted, it will not show the correct information. Display Change display of channel banner, clock etc.. Banner/Clock / Clock / Short Banner / Off Sleep Timer Allows you to choose how long the TV will stay on before turning off. First set the MODE to TV. 0 min. / 15 min. / 30 min. / 45 min. / 60 min. / 90 min. / 120 min. / 180 min. Note: 60 seconds before the TV turns off, a message will appear and it will count the remaining time. If you want to extend the time, press the SLEEP button and you can change the interval. If you don t press the SLEEP button, within 60 seconds the TV will turn off. 43

44 Customizing your TV Key Items (continued) Multi Language/MTS Allows you to listen to a program in stereo, mono sound or another language (SAP). (Depending if available in the program). First you must set the MODE to TV on your remote. Notes: When you are receiving a digital broadcast, if there are other languages, you can change the language by pressing the ML/MTS button. Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo mode even if a certain broadcast is in mono sound only. Choose the mono setting to reduce excessive noise on a certain channel or broadcast. MTS unavailable if your television s input source is (V1, V2, V3, V4, V5). ML/MTS will not work when you are using the HDMI and external input. 44

45 Page Jump > Multi Screen Date: Dimensions: Page: 1/1 Select Operate Back BACK Exit MENU BACK MENU Customizing your TV Photo Viewer Aa Photo Viewer Photo Viewer Operate Back Exit Select Connect your USB Mass Storage Class device to the Photo Viewer terminal on the TV. Photo Viewer allows you to enjoy your digital pictures stored on your USB Mass Storage Class devices. You can view them on the TV in high quality. Notes: Gently pull out your USB device from the Photo Viewer terminal after fi nishing the Photo Viewer menu. Device can only be selected when you have two or more USB devices connected to the TV. Photo Viewer cannot be guaranteed to work with all USB Mass Storage Devices. It may take some time to display or it may not display correctly. Please refer to the Customer Support website at for information and notes regarding your devices you wish to connect. Supported fi le formats are.jpg or.jpg. All your stored data should be backed up fi rst as a precaution before connecting to the TV. Depending on your stored fi le size, it can take extra time to display Photo Viewer page. Device Select your devices such as USB memory or digital camera. Note: By using the USB hub, you can connect several devices. Choices are different depending on your connected devices. Multi Screen Display digital pictures stored on your USB Mass Storage Class devices in thumbnail view. 1 Select Photo Viewer OK... 2 Display 45