Actuator for dampers ACCESSORIES. Actuators for air dampers control in ventilation and air-conditioning systems.

Transcription

1 SP Actuator for dampers CM230-1-F-L LF 230 TF 230 LM230A-TP LM24A-TP LM230A-SR-TP NM24A-TP NM230A-TP NM24A-SR-TP NF230A NF24A SF24A SF230A SF24A-SR SM230A-TP SM24A-TP SM24A-SR-TP ZAKP0027 ZAKP0039 ZAKP0063 ZAKP0045 ZAKP0049 ZAKP0043 ZAKP0058 ZAKP0055 ZAKP0057 ZAKP0051 ZAKP0053 ZAKP0072 ZAKP0059 ZAKP0060 ZAKP0062 ZAKP0067 ZAKP0068 Actuators for air dampers control in ventilation and air-conditioning systems. Type Area, m 2 Torque power, Nm Power supply, VAC Control signals Actuator LM230A-TP 1 5 AC V, 50/60 Hz 2 point (ON/OFF) Actuator LM24A-TP 1 5 AC 24 V, 50/60 HZ / DC 24 V 2/3 point Actuator LM24A-SR-TP 1 5 AC 24 V, 50/60 HZ / DC 24 V Modulating 0-10VDC Actuator NM24A-TP 2 10 AC 24 V, 50/60 HZ / DC 24 V 2/3 point Actuator NM230A-TP 2 10 AC V, 50/60 Hz 2 point (ON/OFF) Actuator NM24A-SR-TP 1 10 AC 24 V, 50/60 HZ / DC 24 V Modulating 0-10VDC Actuator NF230A 2 10 AC V, 50/60 Hz 2 point (ON/OFF) Spring return Actuator NF24A 2 10 AC 24 V, 50/60 HZ / DC 24 V 2 point (ON/OFF) Actuator SF24A 4 20 AC 24 V, 50/60 HZ / DC 24 V 2 point (ON/OFF) Spring return Actuator SF230A 4 20 AC 230 V, 50/60 Hz 2 point (ON/OFF) Spring return Actuator SF24A-SR 4 20 AC 24 V, 50/60 HZ / DC 24 V Modulating 0-10VDC Spring return Actuator SM230A-TP 4 20 AC V, 50/60 Hz 2/3 point (ON/OFF) Actuator SM24A-TP 4 20 AC 24 V, 50/60 HZ / DC 24 V 2/3 point Actuator SM24A-SR- TP 4 20 AC 24 V, 50/60 HZ / DC 24 V Modulating 0-10VDC Actuator CM230-1-F-L 0,4 2 AC V, 50/60 Hz 3 point (ON/OFF) Actuator LF230 0,8 4 AC 230 V, 50/60 Hz 2/3 point Spring return Actuator TF230 0,5 2,5 AC 230 V, 50/60 Hz On/OFF 210 The company reserves the right to make changes of technical data without prior notice

2 SK / SKR Shut-off dampers SK SKR SK 100 SK 125 SK 160 SK 200 SK 250 SK 315 SK 355 SK 400 SK 450 SK 500 SK 630 GSKSK001 GSKSK002 GSKSK003 GSKSK004 GSKSK005 GSKSK006 GSKSK011 GSKSK007 GSKSK008 GSKSK009 GSKSK010 SKR 100 SKR 125 SKR 160 SKR 200 SKR 250 SKR 315 SKR 355 SKR 400 SKR 450 SKR 500 SKR 630 GSKSKR001 GSKSKR002 GSKSKR003 GSKSKR004 GSKSKR005 GSKSKR006 GSKSKR011 GSKSKR007 GSKSKR008 GSKSKR009 GSKSKR010 Shut-off dampers SK/ SKR are used for shutting off and controlling airflow. They are easily installed in a circular air duct system. Can be mounted in any position. The casing is made of galvanized steel. Have a rotating, cut-off blade. The blade can be continually adjusted in a 0-90º angle by the handle (a handle is attached using one screw) on the top of damper. The blade angle of SK/ SKR damper can be read from an embossed scale on the edge of the plate. Type ød, [mm] L1, [mm] L, [mm] H, [mm] SK SK SK SK SK SK SK SK SK SK SK Type ød, [mm] L1, [mm] L, [mm] H, [mm] SKR SKR SKR SKR SKR SKR SKR SKR SKR SKR SKR The company reserves the right to make changes of technical data without prior notice 211

3 SKG / SKM Shut-off dampers SKG SK SKM SKG 100 SKG 125 SKG 160 SKG 200 SKG 250 SKG 315 SKG 355 SKG 400 SKG 450 SKG 500 SKG 630 GSKSKG001 GSKSKG002 GSKSKG003 GSKSKG004 GSKSKG005 GSKSKG006 GSKSKG007 GSKSKG008 GSKSKG009 GSKSKG010 GSKSKG011 SKM 100 SKM 125 SKM 160 SKM 200 SKM 250 SKM 315 SKM 355 SKM 400 SKM 450 SKM 500 SKM 630 GSKSKM001 GSKSKM002 GSKSKM003 GSKSKM004 GSKSKM005 GSKSKM006 GSKSKM022 GSKSKM007 GSKSKM008 GSKSKM009 GSKSKM010 Shut-off dampers SKG/SKM are used for shutting off and controlling airflow. They are easily installed in a circular air duct system. Can be mounted in any position. The casing is made of galvanized steel. Have a rotating, cut-off blade. The blade can be continually adjusted in a 0-90º angle by a motor on the top of damper. The blade of SKG dampers has rubber seal that tightens the inside of the damper when it s in closed position. SKG/SKM shut-off damper is controlled by a motor which is supplied separately. Type ød, [mm] L1, [mm] L, [mm] H, [mm] SK SK SK SK SK SK SK SK SK SK SK Type ød, [mm] L1, [mm] L, [mm] H, [mm] SKM SKM SKM SKM SKM SKM SKM SKM SKM SKM SKM The company reserves the right to make changes of technical data without prior notice

4 SSK Dampers for rectangular ducts SSK - damper without separating profile SSK dampers are used for closing airflow. The dampers are made of aluminium profile with sealing rubber gaskets. Palm driving gear is made of glass-fibre material. Silicon sealing strip provides proper tightness. Dampers are suitable to be used in the temperature ranges from -40º to +80ºC. The flange system of these dampers is the same as in the rectangular air ducts and fans, therefore mounting operations are simple. Size range of manufactured SSK dampers varies from 100mm (H min -100mm, L min -100mm) to 3000mm (H max -3000mm, L max mm). If dimension L bigger than 1000mm, dampers SSK are produced with separating plate. Calculation of required size: H=H n +40 L=L n +40 h=h-30 l=l-60 H - height of damper L - width of damper h - inner height of damper l - inner width of damper H n - nominal height of damper L n - nominal width of damper Specification Damper for rectangular ducts Width [mm] Height [mm] Pressure drop Pressure drop [Pa] SSK L-H SSK L H Air flow [m 3 /s] The company reserves the right to make changes of technical data without prior notice 213

5 RSK Back draft shutter RSK 100 RSK 125 RSK 150 RSK 160 RSK 200 RSK 250 RSK 315 RSK 355 RSK 400 RSK 450 RSK 500 GSKRSK001 GSKRSK002 GSKRSK008 GSKRSK003 GSKRSK004 GSKRSK005 GSKRSK006 GSKRSK009 GSKRSK007 GSKRSK011 GSKRSK012 Back draft dampers RSK are used in circular ducting. They allow circulation of air in one direction only. They are mounted into a system of round air ducts. The damper casing is made of galvanized steel. Blades are made of aluminium, they are spring-loaded. Shutter RSK has to be installed as it is shown in the picture: shaft stands vertically rubber ring is fitted inside. Type ØD, [mm] L, [mm] L1, [mm] Weight RSK ,13 kg RSK ,17 kg RSK ,22 kg RSK ,24 kg RSK ,29 kg RSK ,68 kg RSK ,81 kg RSK ,68 kg 214 The company reserves the right to make changes of technical data without prior notice

6 SKS Rectangular duct silencer SKS SKS SKS SKS SKS SKS SKS SKS SKS GSOSKS001 GSOSKS002 GSOSKS003 GSOSKS004 GSOSKS005 GSOSKS006 GSOSKS007 GSOSKS008 GSOSKS009 Rectangular duct silencers SKS are designed for rectangular duct fans VKS/VKSA and can be mounted into a system of rectangular air ducts. SKS silencers have good sound attenuation characteristics. Several silencers can be mounted into a rectangular air duct system if there is requirement for bigger noise reduction. The casing is made of galvanized steel and inner casing is made of perforated sheet steel. Mineral wool is used for sound insulation. Pressure drop Pressure drop [Pa] Type B, [mm] H, [mm] L, [mm] Weight, [kg] SKS ,0 SKS ,0 SKS ,0 SKS ,0 SKS ,0 SKS ,0 SKS ,0 SKS ,0 SKS ,0 Air flow [m 3 /h] Attenuation values in frequency bands [db] Type 125 Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz SKS SKS SKS SKS SKS SKS SKS SKS SKS The company reserves the right to make changes of technical data without prior notice 215

7 AKS / SAKS Circular duct silencers Round duct silencers AKS/SAKS can be mounted into a system of round air ducts. These silencers have good sound attenuation characteristics. Several silencers can be mounted into a circular air duct system if there is requirement for bigger noise reduction. The housing is made of external SPIRO System duct and inner casing is made of perforated sheet steel. Mineral wool is used for sound insulation. The insulating part in SAKS silencers is thicker than in AKS silencers. Type L, [mm] ød, [mm] ød, [mm] AKS ; 600; AKS ; 600; 900; 1000; AKS ; 900; 1000; AKS ; 900; 1000; AKS ; 900; 1000; AKS ; 900; 1000; AKS ; 1000; AKS ; 1000; AKS ; 1000; AKS ; 1000; SAKS ; 600; 900; 1000; SAKS ; 600; 900; 1000; SAKS ; 600; 900; 1000; SAKS ; 600; 900; 1000; SAKS ; 600; 900; 1000; SAKS ; 1000; The company reserves the right to make changes of technical data without prior notice

8 AKS / SAKS Weight Weight [kg] Type 300 mm 600 mm 900 mm 1000 mm 1200 mm AKS 100 3,0 4,1 4,7 - - AKS 125 3,2 4,5 5,0 5,2 7,7 AKS 160-5,8 6,4 7,0 10,0 AKS 200-7,0 10,0 11,5 12,0 AKS ,3 13,0 14,1 15,0 AKS ,10 17,2 21,0 24,0 AKS ,8 23,0 32,0 AKS ,64 28,0 29,0 AKS ,6 33,4 35,0 AKS ,00 46,1 58,5 SAKS 100 2,1 4,2 6,3 7,0 8,4 SAKS 125 2,2 4,4 6,6 7,3 8,8 SAKS 160 3,3 5,6 9,2 10,2 12,2 SAKS 200 3,6 6,8 10,0 11,0 13,2 SAKS 250 4,1 8,2 12,4 13,8 16,6 SAKS ,6 26,2 31,4 Attenuation values in frequency bands [db] Type 125 Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz AKS 100/ AKS 100/ AKS 125/ AKS 125/ AKS 160/ AKS 160/ AKS 200/ AKS 200/ AKS 250/ AKS 250/ AKS 315/ AKS 315/ AKS 400/ AKS 500/ AKS 630/ AKS 800/ The company reserves the right to make changes of technical data without prior notice 217

9 WSG Grilles WSG 150 WSG 160 WSG 200 GGRWSG0126_508 GGRWSG0126_509 GGRWSG0126_510 Grilles WSG are used for air supply and extraction of air handling units. Made of steel with powder coating. 218 The company reserves the right to make changes of technical data without prior notice

10 AP Mounting clamps for circular ducts AP 100 AP 125 AP 150 AP 160 AP 200 AP 250 AP 315 AP 355 AP 400 AP 450 AP 500 AP 560 AP 630 AP 710 AP 800 GAPAP001 GAPAP002 GAPAP003 GAPAP004 GAPAP005 GAPAP006 GAPAP007 GAPAP008 GAPAP009 GAPAP010 GAPAP011 GAPAP015 GAPAP012 GAPAP016 GAPAP013 Clamps AP are used for the mounting of various elements of ventilation and air conditioning systems. They minimize vibrations and ensure tight fit of various parts of a system. Made of galvanized steel. Type ød, [mm] A, [mm] Weight, [kg] AP ,12 AP ,15 AP ,18 AP ,20 AP ,22 AP ,25 AP ,28 AP ,30 AP ,32 AP ,35 AP ,37 AP ,4 AP ,44 AP ,48 AP ,52 The company reserves the right to make changes of technical data without prior notice 219

11 STP Flange adapter Flange adapters are used to connect AHU with standard ventilation ducts. Adapters are made of galvanized steel. [mm] A B C ød E F G H I J STP-C 400x STP-C 500x STP-C 700x STP-C 700x STP-C 800x STP 700x x STP 700x x STP 800x x STP 900x x The company reserves the right to make changes of technical data without prior notice

12 LJ / PG Flexible connection LJ/PG LJ/PG LJ/PG LJ/PG LJ/PG LJ/PG LJ/PG LJ/PG LJ/PG GLJLJ/PG001 GLJLJ/PG002 GLJLJ/PG004 GLJLJ/PG005 GLJLJ/PG007 GLJLJ/PG008 GLJLJ/PG009 GLJLJ/PG010 GLJLJ/PG011 Flexible connection LJ/PG is made from galvanised steel sheet and neoprene fabric. Type B, [mm] H, [mm] Weight, [kg] LJ/PG 30x ,3 LJ/PG 40x ,4 LJ/PG 50x ,5 LJ/PG 50x ,7 LJ/PG 60x ,0 LJ/PG 60x ,2 LJ/PG 70x ,4 LJ/PG 80x ,7 LJ/PG 100x ,0 The company reserves the right to make changes of technical data without prior notice 221