DELV-2LCD-7XLPRO DELV-2LCD-7XLRM DELV-2LCD7XLS (SDI) USER MANUAL

Transcription

1 DELV-LCD-7XLPRO DELV-LCD-7XLRM DELV-LCD7XLS (SDI) DUAL NTSC 7" COLOR TFT :9 / : LCD RACKMOUNT MONITOR SERIES USER MANUAL

2 I. Product Description Get ready for the new and demanding high resolution video production market, the Delvcam LCD series advanced monitoring system is loaded with features. A dual monitor rackmount solution for the high end video environment, the Delvcam LCD series provides both :9 and standard : aspect ratio video monitoring in a well designed, rackmount housing with optional adjustable pitch. DELV-LCD-7XLPRO Tilting Model Features: Picture Mode Select: :9 Wide Cinema Mode : Normal Mode : Wide Mode : Full Mode Looping BNC inputs High Resolution Performance NTSC-M Standard CATV, UHF, VHF TV ATSC Receiver (Monitor A only: 7XLPRO) Allows 80 of tilt while mounted in rack : 7XLPRO Low power consumption and heat dissipation for mobile applications Fits in standard 9" rack, spaces high On screen color, tint, brightness and contrast controls Wireless I/R remote control Assembled in USA, 90 Day Warranty II. Product Specifications DELV-LCD-7XLRM DELV-LCD7XLS (SDI) DISPLAY 7 active matrix TFT-LCD(:9) BACK LIGHT Internal CCFT DOT MATRIX 0.9 (H) x 0.7 (V) RESOLUTION 0 Horizontal x Vertical BRIGHTNESS 00 cd/m(nit) CONTRAST 0: VIEWING ANGLE U : / D :, R / L :0 PIXEL CONFIGURATION Striped VIDEO SIGNAL Vpp into 7Ω Terminated & Looping Input STANDARD NTSC-M POWER REQUIREMENTS DELV-LCD-7XLPRO: DELV-LCD7XLS:(SDI) DELV-LCD-7XLRM: OPERATING TEMPERATURE REMOTE CONTROL DIMENSIONS DELV-LCD-7XLPRO: DELV-LCD7XLS:(SDI) DELV-LCD-7XLRM: WEIGHT 0-0 VoltsAC 0/0 cycauto switching, watts 0-0 VoltsAC 0/0 cycauto switching, watts Dual AC Power Adapters v A - Degrees F (0-0 C) Handheld Infrared 9"W x."d x 7"H (RU) 9"W x."d x 7"H (RU) 9"W x.7"d x 7"H (RU) XLPRO-.0 Lbs. XLS-8.0 Lbs. RM-0.0 Lbs.

3 III. Items Included DELV-LCD-7XLPRO Hand-Held IR Remote Control Unit () 7 Ohm Terminator () RF Adapter (Monitor A Only) 0-0V 0/0Hz Power Adapter: A Items Included DELV-LCD-7XLRM & DELV-LCD7XLS (SDI) DELV-LCD-7XLRM ONLY Hand-Held IR Remote Control Unit () External RF Antenna Adapter Cable () DELV-LCD7XLS (SDI) ONLY Video / Audio Input Cable () - DELV-LCD-7XLRM ONLY 0-0V 0/0Hz Power Adapter: () V Cigarette Adapter () 7 Ohm Terminator () - DELV-LCD 7XLS (SDI) ONLY

4 IV. Front Panel Product Controls DELV-LCD-7XLPRO DELV-LCD-7XLRM DELV-LCD7XLS (SDI) IR Remote Complete instructions for LCD setup and operation are covered in the included LCD manual. Please note that the manual does cover mechanical items and topics that are no longer covered for the Delvcam dual-rack monitor configuration. It is recommended that you read and study that manual first.

5 V. Rear Panel Connections DELV-LCD-7XLPRO Power Entry Monitor B - Video input (looping) Monitor B - Audio input Monitor A - RF (CATV) input Monitor A - Audio input Monitor A - Video input (looping) VI. Monitor Tilt Operation Mount Monitor in Rack Push Top or Bottom of Monitor to Tilt as Desired Side View

6 VII. Rear & Side Panel Features DELV-LCD-7XLRM 7 8 Interface Area - Side View Monitor A & B For presentation clarity, information is shown for one monitor only Headphone Jack Internal Antenna AV Input Speaker - Left AV Input 7 Speaker - Right V DC Power Input 8 External RF Input Jack

7 VIII. Rear Panel Connections DELV-LCD-7XLS (SDI) 7 Audio L-R Input Power Input V Encoder Circuit On / Off Note: If battery powered this switch must be turned off after use. Composite Video / SDI Video Switch 7 Composite Video Input - Note: CVI uses side port AV input SDI Video Input (terminated) Composite Video Loop Output For presentation clarity, information is shown for one monitor only Side View - Composite Video Input REV

8 SAFETY WARNING. To prevent fire or shock hazard, do not expose this equipment to the environment of high humidity and dust. Do not use it in an unprotected outdoor installation or any area classified as wet.. The temperature for installation should be kept between -0 C ~ +9 C. Avoid direct sunlight or extreme changes of temperature.. For the sake of safety, do not disseminate the unit or put it on an unstable base. Do not drop it and avoid heavy impact.. Ventilation: Openings in the enclosure are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. This unit should not be placed in a built-in installation unless proper ventilation is provided.. Cleaning: Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth.. Overload: Do not overload outlets and extension cords as this may result in a risk of fire or electric shock. 7. Object and Liquid Entry: Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit. 8. Service: Do not attempt to open or service this unit yourself as opening or removing covers may expose you to dangerous voltage of other hazards. Tower Drive Saugerties, NY 77 Tel Fax 8--0