*MFL * OWNER S MANUAL. Please read this manual carefully before operating your set and retain it for future reference.

Transcription

1 OWNER S MANUAL Please read this manual carefully before operating your set and retain it for future reference. 55EC EC9800 *MFL * P/NO : MFL (1406-REV01)

2 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, WARNING/CAUTION within an equilateral triangle, is intended to RISK OF ELECTRIC SHOCK DO NOT OPEN alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION - TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. ydo not use this apparatus near water. yclean only with a dry cloth. ydo not block any ventilation openings. Install in accordance with the manufacturer s instructions. ydo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged. ydo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country). NOTE The note helps you understand and use the product safely. Please read the note carefully before using the product. Power Supply ydo not press strongly upon the Short-circuit panel with a hand or a Breaker sharp object such as a nail, pencil or pen, or make a scratch on it. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

3 IMPORTANT SAFETY INSTRUCTIONS 3 yprotect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. yonly use attachments/accessories specified by the manufacturer. yuse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. yunplug this apparatus during lightning storms or when unused for long periods of time. ycaution concerning the Power Cord (Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. yrefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Short-circuit Breaker ywarning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. Power Supply ydo not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in. ykeep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. ydo not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). Short-circuit Breaker Short-circuit Breaker Short-circuit Breaker Power Supply Power Supply Power Supply

4 4 IMPORTANT SAFETY INSTRUCTIONS ygrounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a threeprong grounded AC plug must be connected to a threeprong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes. Short-circuit Breaker Power Supply yas long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. ydo not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user s authority to operate this product. youtdoor Antenna Grounding (Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and builtup static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Ground Clamp Electric Service Equipment Ground Clamp NEC: National Electrical Code Antenna Lead in Wire Antenna Discharge Unit (NEC Section ) Grounding Conductor (NEC Section ) Power Service Grounding Electrode System (NEC Art 250, Part H) ycleaning When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine. ymoving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. yventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places. yif you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center. ykeep the product away from direct sunlight. ynever touch this apparatus or antenna during a thunder or lightning storm. ywhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV. ydo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen. ydisconnecting DEVICE FROM THE MAIN POWER Mains plug is the disconnecting device. The plug must remain readily operable. ystore the accessories (battery, etc.) in a safe location out of the reach of children. ythis apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information. ydo not dispose of batteries in a fire. ydo not short circuit, disassemble or allow the batteries to overheat. ydot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

5 IMPORTANT SAFETY INSTRUCTIONS 5 ygenerated Sound Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product. ytake care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product. ydo not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall. yif the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. Preventing Image burn or Burn-in on your TV screen For USA and Canada FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/tv technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. yif a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty. yif the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. yavoid displaying a fixed image on the TV screen for a long period of time (1 or more hours for OLED). to prevent image burn. ypreventing Screen Burn Displaying still images, such as a station s logo, subtitle, screen menu, video game or computer screen, for a long time may damage the screen, causing screen burn which can remain for a long time or never disappear. Do not display still images for over an hour. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer s attention to Article of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

6 6 IMPORTANT SAFETY INSTRUCTIONS Viewing 3D Imaging CAUTION WARNING Viewing Environment Viewing Environment yviewing Time - When watching 3D contents, take 5 to 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness ysome users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents. ydo not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc. y3d Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced. yif you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult. yif your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents. Symptoms which require discontinuation or refraining from watching 3D contents ydo not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking. ywhen these symptoms are experienced, stop using/ watching 3D contents and get enough rest until the symptom subsides. - Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue. yviewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age yinfants / Children - Usage/ Viewing 3D contents for children under the age of 5 are prohibited. - Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents. - Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image. yteenagers - Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired. yelderly - The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance. Cautions when using the 3D glasses ymake sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. ydo not use 3D glasses instead of your normal glasses, sunglasses or protective goggles. yusing modified 3D glasses may cause eye strain or image distortion. ydo not keep your 3D glasses in extremely high or low temperatures. It will cause deformation. ythe 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

7 LICENSES / OPEN SOURCE SOFTWARE NOTICE 7 LICENSES Supported licenses may differ by model. For more information about licenses, visit OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

8 8 TABLE OF CONTENTS TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 6 Viewing 3D Imaging 7 LICENSES 7 OPEN SOURCE SOFTWARE NOTICE 8 TABLE OF CONTENTS 9 INSTALLATION PROCEDURE 34 MAGIC REMOTE FUNCTIONS 35 Registering Magic Remote 35 How to use Magic Remote 35 Precautions to Take when Using the Magic Remote 36 USING THE USER GUIDE 37 SPECIFICATIONS 38 EXTERNAL CONTROL DEVICE SETUP 9 ASSEMBLING AND PREPARING 9 Unpacking 11 Optional Extras 12 Parts and Buttons 13 Using the Joystick Button 14 Lifting and Moving the TV 14 Setting Up the TV 14 - Attaching the AV Cover 15 - Mounting on a Table 16 - Tidying Cables 16 - Mounting on a Wall 20 Using Built-in Camera (For 77EC9800) 20 - Preparing Built-in Camera 21 - Name of Parts for the Built-In Camera 21 - Checking the Camera s Shooting Range 39 MAINTENANCE 39 Cleaning Your TV 39 - Screen, Frame, Cabinet, and Stand 39 - Power Cord 39 TROUBLESHOOTING 22 MAKING CONNECTIONS 22 Connecting to an Antenna or Cable 23 Connecting to an HD receiver, DVD Player, or VCR 23 - HDMI Connection 25 - DVI to HDMI Connection 26 - Connecting to a Mobile Phone 27 - Component Connection 28 - Composite Connection 29 Connecting a PC 29 - HDMI Connection or DVI to HDMI Connection 31 Connecting to an Audio System 31 - Digital Optical Audio Connection 32 Connecting headphones (For 77EC9800) 33 Connecting a USB Device NOTE yimage shown may differ from your TV. yyour TV s OSD (On Screen Display) may differ slightly from that shown in this manual. ythe available menus and options may differ from the input source or product model that you are using. ynew features may be added to this TV in the future.

9 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 9 INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Connect an external device to the TV set. 3 Make sure the network connection is available. You can use the TV network functions only when the network connection is made. * When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. CAUTION ydo not use any unapproved items to ensure the safety and product life span. yany damages or injuries by using unapproved items are not covered by the warranty. yin case of some model, the thin film on screen is a part of TV, So don t take it off. NOTE ythe items supplied with your product may vary depending upon the model. yproduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. yfor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick (0.39 inches) and 18 mm (0.7 inches) width. yuse an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not fit into your TV s USB port. B B A A *A 10 mm (0.39 inches) *B 18 mm (0.7 inches)

10 10 ASSEMBLING AND PREPARING Magic Remote, Batteries (AA) (See page 34.) Owner s Manual Polishing cloth Use this to remove dust from the cabinet. Tag On Cinema 3D Glasses The number of 3D glasses may differ depending upon the model or country. Tag on Component Video Cable (See page 27.) (For 55EC9300) Composite Video Cable (See page 27 and 28.) (For 77EC9800) Cable Holder (See page 16.) (For 77EC9800) AV Cover (See page 14.) HDMI Cable (See page 24 and 29.) AV Cover (See page 14.)

11 ASSEMBLING AND PREPARING 11 Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models. The model name or design may be changed manufacturer s circumstances or policies. AN-MR500 Magic Remote AG-F***DP Dual Play Glasses AG-F*** Cinema 3D Glasses LG Audio Device AN-VC5** Video Call Camera (Depending upon model) Tag On

12 12 ASSEMBLING AND PREPARING Parts and Buttons (For 55EC9300) Front Rear Screen Joystick button2 LG Logo Light Speakers Remote Control Sensor and Intelligent Sensor1 (For 77EC9800) Front Rear Built in Camera Screen Joystick button2 Speakers LG Logo Light Remote Control Sensor and Intelligent Sensor1 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 Joystick button is located behind the screen of TV. NOTE yyyou can set the LG Logo Light to on or off by selecting GENERAL in the main menus. (Depending upon model)

13 ASSEMBLING AND PREPARING 13 Using the Joystick Button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic functions Power On When the TV is turned off, place your finger on the joystick button and press it once and release it. Power Off When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it. Volume Control If you place your finger over the joystick button and move it left or right, you can adjust the volume level you want. Channels Control If you place your finger over the joystick button and move it up or down, you can scrolls through the saved channels you want. NOTE ywhen your finger over the joystick button and push it up, down, left, or right, be careful not to press the joystick button. If you press the joystick button first, you may not be able to adjust the volume level and/or scroll through saved channels. Adjusting the menu When the TV is turned on, press the joystick button one time. You can adjust the Menu items(,, )moving the joystick button left or right. TV Off close Input Turns the power off. Clears on-screen displays and returns to TV viewing. Changes the input source.

14 14 ASSEMBLING AND PREPARING Lifting and Moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. ywhen transporting a large TV, there should be at least 2 people. ywhen transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yavoid touching the screen at all times, as this may result in damage to the screen. ydo not place the product on the floor with its front facing down. Doing so may result in damage to the screen. yit is recommended to move the TV in the box or packing material that the TV originally came in. ybefore moving or lifting the TV, disconnect the power cord and all cables. ywhen holding the TV, the screen should face away from you to avoid damage. ywhen transporting the TV, do not expose the TV to jolts or excessive vibration. ywhen transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right. ydo not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen. ybe sure to keep your TV upright instead of laying or tilting it while moving the TV. ywhen handling the TV, be careful not to damage the protruding joystick button. Setting Up the TV yhold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. Attaching the AV Cover Please assemble the AV cover as shown in the figure. (For 55EC9300) AV cover (For 77EC9800) AV cover

15 ASSEMBLING AND PREPARING 15 Mounting on a Table Securing the TV to a wall (optional) 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. 10 cm (4 inches) 10 cm 10 cm 10 cm 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface. CAUTION ymake sure that children do not climb on or hang on the TV. 2 Connect the power cord to a wall outlet. CAUTION ydo not place the TV near or on sources of heat, as this may result in fire or other damage. NOTE yuse a platform or cabinet that is strong and large enough to support the TV securely. ybrackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

16 16 ASSEMBLING AND PREPARING Tidying Cables Mounting on a Wall Gather and bind the cables with the cable holder. (For 55EC9300) An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. When you do not use LG s wall mount bracket, please use wall mount bracket which the distance to the wall is adequately secured for seamless connectivity to external devices. Cable Holder Cable Holder 10 cm (4 inches) 10 cm 10 cm (For 77EC9800) 10 cm Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Model 55EC9300 Cable Holder Cable Holder A A 210 CAUTION ydo not move the TV by holding the cable management and cable band, as the cable holders may break, and injuries and damage to the TV may occur. Standard screw Number of screws 2 Wall mount bracket (optional) M6 OSW100 Model VESA (A x B) 77EC x 400 A B Standard screw Number of screws 4 Wall mount bracket (optional) M6 LSW420BX

17 ASSEMBLING AND PREPARING 17 OSW100 LSW420BX Wall mount bracket (optional) CAUTION ydisconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yif you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. ydo not over tighten the screws as this may cause damage to the TV and void your warranty. yuse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. Removing a stand (For 55EC9300) 1 2 Hanger Screw for attaching the hanger NOTE yuse the screws that are listed on the VESA standard screw specifications. ythe wall mount kit includes an installation manual and necessary parts. ythe wall mount bracket is optional. You can obtain additional accessories from your local dealer. ythe length of screws may differ depending upon the wall mount. Make sure to use the proper length. yfor more information, refer to the manual supplied with the wall mount. yyou will need at least two people to remove the stand and one more to separate the stand from the TV so it doesn t fall when the screws are removed. ywhen removing a stand, lay the TV on its back on a padded table or surface. Do not put the TV face (front) down on the table. CAUTION ywhen laying the TV on its back on a padded table or surface, be careful to prevent the TV from being damaged. 3 NOTE yfor more information about mounting on a wall, refer to the OSW100 manual. ywhen mounting the TV on a table, attach the stand by performing the stand removal in reverse. CAUTION (When attaching the stand) ymake sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.) ydo not tighten the screws with too much force; otherwise they may be damaged and come loose later.

18 18 ASSEMBLING AND PREPARING 77EC9800 Wall Type Set-up Guide 1 Guide spacer assembly : Remove the VESA screws 4EA and assemble guide spacer 4EA Type 1. Hanging the TV on the wall before removing a stand. 1 2 Wall mount bracket installation : After installation, move the bracket forward

19 ASSEMBLING AND PREPARING 19 Type 2. Hanging the TV on the wall after removing a stand. 1 4 CAUTION ywhen laying the TV on its back on a padded table or surface, be careful to prevent the TV from being damaged

20 20 ASSEMBLING AND PREPARING Using Built-in Camera (For 77EC9800) Preparing Built-in Camera You can make a Skype video call or use the motion recognition function using the built-in camera of the TV. This TV does not support the use of an external camera. 1 Pull up the built-in camera at the back of the TV. NOTE ybefore using the built-in camera, you must recognize the fact that you are legally responsible for the use or misuse of the camera by the relevant national laws including the criminal law. ythe relevant laws include the Personal Information Protection law which regulates the processing and transferring of personal information and the law which regulates the monitoring by camera in a workplace and other places. ywhen using the built-in camera, the user must gain consent from the persons being observed. Please avoid using the camera in the following manner. We suggest avoiding the following situations: (1) Using the camera in areas where the use of camera is generally prohibited such as restroom, locker room, fitting room, and security area. (2) Using the camera while causing the infringement of privacy. (3) Using the camera while causing the violation of the relevant regulations or laws. Slide NOTE yremove the protective film before using the built-in camera. 2 You can adjust the angle of the camera with the angle adjustment lever on the back of the built-in camera (within 5 degrees vertically). [Side View] 7 5 Lever Lens

21 ASSEMBLING AND PREPARING 21 3 Pull down the built-in camera when you are not using it. Name of Parts for the Built-In Camera Camera Lens Protective Film Microphone Checking the Camera s Shooting Range 1 Press the (Home) button on the remote control to display the Home menu. 2 Select CAMERA and then press the Wheel (OK) button. NOTE ythe optimal distance from the camera to use the motion recognition function is between 1.5 m (5 ft) and 4.5 m (15 ft).

22 22 MAKING CONNECTIONS MAKING CONNECTIONS yimage shown may differ from your TV. You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device s connection, refer to the manual provided with each device. NOTE yif you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. ythe external device connections shown may differ slightly from illustrations in this manual. yconnect external devices to the TV regardless of the order of the TV port. yif you connect a gaming device to the TV, use the cable supplied with the gaming device. yrefer to the external equipment s manual for operating instructions. Connecting to an Antenna or Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. (For 55EC9300) Antena VHF Antena UHF (For 77EC9800) Antena VHF Antena UHF Antenna Antenna (*Not Provided) Coaxial (75Ω) (*Not Provided) Coaxial (75Ω) Terminal Terminal CAUTION ymake sure not to bend the copper wire of the RF cable. Copper wire ycomplete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV. NOTE yuse a signal splitter to use more than 2 TVs. ydtv Audio Supported Codec: MPEG, Dolby Digital.

23 MAKING CONNECTIONS 23 Connecting to an HD receiver, DVD Player, or VCR Connect an HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE yuse the latest High Speed HDMI Cable that supports CEC (Customer Electronics Control) function. yhigh Speed HDMI Cables are tested to carry an HD signal up to 1080p and higher. yhdmi Audio Supported Format: PCM (Up to 192 khz, 32 khz / 44.1 khz / 48 khz / 96 khz / 192 khz) ywhen you use an HDMI cable (HDMI port3), it is recommended that you use the cable provided. If you use a regular HDMI cable, use a high-speed HDMI cable (3m or less). (For 77EC9800) Choose any HDMI input port to connect. It does not matter which port you use. (For 55EC9300) (*Not Provided) HDMI DVD / Blu-Ray / HD Cable Box / HD STB ARC (Audio Return Channel) ywhen connected with a high-speed HDMI cable, digital audio can be sent to a compactible device without an additional optical audio cable. yarc is only supported on the HDMI/DVI IN 1 (ARC) port. An external audio device that supports ARC should be connected to HDMI/DVI IN 1 (ARC) if you wish to use ARC.

24 24 MAKING CONNECTIONS (For 77EC9800) 60Hz Support Format Resolution 3840 X 2160p 4096 X 2160p Frame rate (Hz) Supported at HDMI3 Port only Color Depth / Chroma Sampling 8 bit 10 bit 12 bit YCbCr 4:2:0 YCbCr 4:2:0 1 YCbCr 4:2:2 1 YCbCr 4:4: RGB 4:4: HDMI Cable NOTE yhdmi specifications may be different for each input port, so make sure to check the device specifications before connecting. ycontact customer service for more information on the HDMI specifications of each input port. HDMI DVD / Blu-Ray / HD Cable Box / HD STB ARC (Audio Return Channel) ywhen connected with a high-speed HDMI cable, digital audio can be sent to a compactible device without an additional optical audio cable. yarc is only supported on the HDMI/DVI IN 2 (ARC) port. An external audio device that supports ARC should be connected to HDMI/DVI IN 2 (ARC) if you wish to use ARC.

25 MAKING CONNECTIONS 25 DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. NOTE ywhen using the HDMI/DVI cable, Single link is only supported. Choose any HDMI input port to connect. It does not matter which port you use. (For 55EC9300) (For 77EC9800) (*Not Provided) (*Not Provided) (*Not Provided) (*Not Provided) AUDIO OUT DVI OUT DVD / Blu-Ray / HD Cable Box AUDIO OUT DVI OUT DVD / Blu-Ray / HD Cable Box

26 26 MAKING CONNECTIONS Connecting to a Mobile Phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. NOTE yconnect the mobile phone to the HDMI/DVI IN 4 (MHL) port to view the phone screen on the TV. ythis only works with an MHL-enabled phone. ywith some MHL supporting mobile phones, you can use the TV remote to control the phone. yan MHL passive cable is needed to connect the TV and a mobile phone. yremove the MHL cable from the TV when: - the MHL function is disabled - your mobile device is fully charged in standby mode (For 55EC9300) MHL Cable (*Not Provided) Mobile phone (For 77EC9800) MHL Cable (*Not Provided) Mobile phone

27

28 28 MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE yif you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. ycheck to ensure the cables are matched with the corresponding color connection. (For 55EC9300) (For 77EC9800) AV IN COMPONENT VIDEO AUDIO PR PB Y AV IN COMPONENT VIDEO AUDIO PR PB Y YELLOW YELLOW YELLOW (Use the composite video cable provided.) WHITE WHITE RED RED (*Not Provided) YELLOW YELLOW YELLOW (Use the composite video cable provided.) WHITE WHITE RED RED YELLOW WHITE RED YELLOW WHITE (*Not Provided) RED VIDEO L ( MONO ) AUDIO R VIDEO L ( MONO ) AUDIO R VCR / DVD / Blu-Ray / HD Cable Box VCR / DVD / Blu-Ray / HD Cable Box

29 MAKING CONNECTIONS 29 Connecting a PC NOTE yuse an HDMI connection for the best image quality. ydepending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. yin PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. ythe synchronization input form for Horizontal and Vertical frequencies is separate. ydepending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly. yif you are using DVI out from a PC, you have to connect analog audio separately. Refer to the instructions on the next page. ywhen using the HDMI/DVI cable, Single link is only supported. yif Ultra HD content is played on your PC, video or audio may become disrupted intermittently depending upon your PC s performance. (For 77EC9800) HDMI Connection or DVI to HDMI Connection Choose method A or B to make connection. Method A: HDMI Connection Choose any HDMI input port to connect. It does not matter which port you use. (For 55EC9300) (For 77EC9800) (*Not Provided) HDMI Cable HDMI AUDIO OUT HDMI PC AUDIO OUT DVI OUT PC

30 30 MAKING CONNECTIONS Method B: DVI to HDMI Connection Choose any HDMI input port to connect. It does not matter which port you use. (For 55EC9300) (For 77EC9800) (*Not Provided) (*Not Provided) (*Not Provided) (*Not Provided) AUDIO OUT HDMI DVI OUT PC AUDIO OUT DVI OUT PC

31 MAKING CONNECTIONS 31 Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTE ydo not look into the optical output port. Looking at the laser beam may damage your vision. yaudio with ACP (Audio Copy Protection) function may block digital audio output. (For 55EC9300) (For 77EC9800) (*Not Provided) (*Not Provided) Digital Audio System OPTICAL AUDIO IN Digital Audio System OPTICAL AUDIO IN

32 32 MAKING CONNECTIONS Connecting headphones (For 77EC9800) Listening to sound with headphones. NOTE ydo not use headsets (earphones) at high volume or for a long time. It may cause damage to your hearing. yaudio menu options are disabled when headphones are connected. ywhen changing AV MODE with a headphone connected, the change is applied to video but not to audio. yoptical Digital Audio Out is not available when connecting a headphone. yheadphone impedance: 16 Ω ymax audio output: mw to mw yheadphone jack size: 3.5 mm (0.13 inches) Headphone (*Not Provided)

33 MAKING CONNECTIONS 33 Connecting a USB Device Connect a USB storage device such as USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTE ysome USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it directly to the USB port on the TV. ysome USB device may not work if it does not meet USB 3.0 standard. In case, connect it to USB IN 2 or USB IN 3 port. (For 77EC9800) Choose any USB input port to connect. It does not matter which port you use. (For 55EC9300) (*Not Provided) USB / USB HUB / HDD (For 77EC9800) (*Not Provided) USB / USB HUB / HDD

34 34 MAGIC REMOTE FUNCTIONS MAGIC REMOTE FUNCTIONS When the message Magic Remote battery is low. Change the battery. is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. CAUTION ydo not mix old and new batteries, as this may damage the remote control. This remote uses infrared light. When in use, it should be pointed in the direction of the TV s remote sensor. Wheel (OK) Press the center of the Wheel button to select a menu. You can change channels and scroll the menu by using the Wheel button. (BACK) Returns to the previous screen. (EXIT to LIVE) Switches among broadcast (antenna) and various inputs. (POWER) Turns the TV on or off. Navigation buttons (up/down/left/right) Press the up, down, left or right button to scroll the menu. If you press buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right. Color buttons These access special functions in some menus. ( Red, Green, Yellow, Blue) VOL Adjusts the volume level. /INPUT Displays the Screen Remote. * Accesses the Universal Control Menu in some regions. * Pressing and holding the button will display a menu to select an external device that is connected to the TV. Used for viewing 3D video. (MUTE) Mutes all sounds. * By pressing and holding the button, VD function will be enabled. SAP(Secondary Audio Program) Feature can also be enabled by pressing the key.. CH Scrolls through the saved channels. VOL /INPUT CH (Home) Accesses the Home menu. (Voice recognition) Network connection is required to use the voice recognition function. 1. Press the voice recognition button. 2. Speak when the voice display window appears on the left of the TV screen. * Use the Magic Remote no further than 10 cm (4 inch) from your face. * The voice recognition may fail when you speak too fast or too slowly. * The recognition rate may vary depending upon the user s characteristics (voice, pronunciation, intonation, and speed) and the environment (noise and TV volume).

35 MAGIC REMOTE FUNCTIONS 35 Registering Magic Remote The Magic Remote operates by pairing with your TV. How to register the Magic Remote (Wheel) How to deregister the Magic Remote (BACK) (Home) To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control. * If the TV fails to register the Magic Remote, try again after turning the TV off and back on. Press the (BACK) and (Home) at the same time, for five seconds, to unpair the Magic Remote with your TV.»» Pressing and holding the (EXIT to LIVE) button will let you cancel and reregister Magic Remote at once. Precautions to Take when Using the Magic Remote yuse the Magic remote within the maximum communication distance (10 m, 32.8 ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure. ya communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic remote. ythe Magic remote may be damaged or may malfunction if it is dropped or receives a heavy impact. ytake care not to bump into nearby furniture or other people when using the Magic remote. ymanufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric wave interference. yit is recommended that an Access Point (AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m (3.28 ft), the Magic remote may not perform as expected due to frequency interference. How to use Magic Remote yshake the Magic Remote slightly to the right and left or press (Home), /INPUT, buttons to make the pointer appear on the screen. (In some TV models, the pointer will appear when you turn the Wheel button.) yif the pointer has not been used for a certain period of time or Magic Remote is placed on a flat surface, then the pointer will disappear. yif the pointer does not move as you wish, shake Magic Remote to the left and right. The pointer will move to the center of the screen. ythe Magic Remote depletes batteries faster than a normal remote due to the additional features.

36 36 USING THE USER GUIDE USING THE USER GUIDE User Guide allows you to easily access detailed TV information. 1 Press (Home) button to access the Home menu. 2 Select User Guide and press the Wheel (OK) button.

37 SPECIFICATIONS 37 SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement Television System AC 120 V ~ 50 / 60 Hz NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV External Antenna Impedance Environment condition Operating Temperature 75 Ω 0-40 C (32 F ~ 104 F) Operating Humidity Less than 80 % Storage Temperature C (- 4 F ~ 140 F) Storage Humidity Less than 85 % Dimensions (W x H x D) Weight MODELS With stand Without stand With stand Without stand Current Value / Power consumption 55EC9300 (55EC9300-UA) 1,225 x 753 x 204 (mm) 48.2 x 29.6 x 8.0 (inch) 1,225 x 715 x 44 (mm) 48.2 x 28.1 x 1.7 (inch) 16.7 kg (36.8 Ibs) 14.7 kg (32.4 Ibs) 3.2 A / 320 W Dimensions (W x H x D) Weight MODELS With stand Without stand With stand Without stand 77EC9800 (77EC9800-UA) 1,718 x 1,110 x 322 (mm) 67.6 x 43.7 x 12.6 (inch) 1,718 x 1,064 x 33.7 (mm) 67.6 x 41.8 x 1.3 (inch) 43.3 kg (95.4 Ibs) 39.9 kg (87.9 Ibs) (For 55EC9300) Wireless Lan Wireless module (LGSBW41) Specifications Bluetooth Standard IEEE a/b/g/n Standard Bluetooth Version 3.0 Frequency Range Output Power (Max.) 2400 to MHz 5150 to 5250 MHz 5725 to 5850 MHz a: 11.5 dbm b: 11 dbm g: 10.5 dbm n - 2.4GHz: 11 dbm n - 5GHz: 12.5 dbm Frequency Range Output Power (Max.) 2400 to MHz 10 dbm or Lower ybecause band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. ythis device should be installed and operated with minimum distance 20 cm (7.8 inch) between the device and your body. And this phrase is for the general statement for consideration of user environment. ycontains FCC ID: BEJLGSBW41 / Contains IC: 2703H-LGSBW41

38 38 SPECIFICATIONS / EXTERNAL CONTROL DEVICE SETUP (For 77EC9800) Standard Frequency Range Output Power (Max.) Wireless module (LGSWF41) Specifications IEEE a/b/g/n/ac 2400 to MHz 5150 to 5250 MHz 5725 to 5850 MHz a: 11.5 dbm b: 14.5 dbm g: 16.5 dbm n - 2.4GHz: 16.5 dbm n - 5GHz: 14.5 dbm ac - 5GHz : 14.5 dbm ybecause band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. ythis device should be installed and operated with minimum distance 20 cm (7.8 inch) between the device and your body. And this phrase is for the general statement for consideration of user environment. ycontains FCC ID: BEJLGSWF41 / Contains IC: 2703H-LGSWF41 Bluetooth module (BM-LDS401) Specifications Standard Bluetooth Version 3.0 Frequency Range Output Power (Max.) ycontains FCC ID : BEJLDS401 / Contains IC : 2703H-LDS to MHz 10 dbm or Lower EXTERNAL CONTROL DEVICE SETUP To obtain the external control device setup information, please visit

39 MAINTENANCE / TROUBLESHOOTING 39 MAINTENANCE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product lifespan. CAUTION ybefore cleaning, turn the power off and disconnect the power cord and all other cables. ywhen the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen, Frame, Cabinet, and Stand To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. CAUTION ydo not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions. ydo not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or lubricants, as these may damage the screen s finish and cause discoloration. ydo not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction. Power Cord Remove the accumulated dust or dirt on the power cord regularly. TROUBLESHOOTING Problem Cannot control the TV with the remote control. No image display and no sound is produced. The TV turns off suddenly. Solution ycheck the remote control sensor on the product and try again. ycheck if there is any obstacle between the product and the remote control. ycheck if the batteries are still working and properly installed ( to, to ). ycheck if the product is turned on. ycheck if the power cord is connected to a wall outlet. ycheck if there is a problem in the wall outlet by connecting other products. ycheck the power control settings. The power supply may be interrupted. ycheck if the Sleep Timer/Time Power Off is activated in the TIMERS settings. yif there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

40

41

42

43 CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. As you enjoy your television, please note that all televisions new and old- must be supported on proper stands or installed according to the manufacturer s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury. TUNE IN TO SAFETY ALWAYS follow the manufacturer s recommendations for the safe installation of your television. ALWAYS read and follow all instructions for proper use of your television. NEVER allow children to climb on or play on the television or the furniture on which the television is placed. NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers. ALWAYS install the television where it cannot be pushed, pulled over or knocked down. ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed. WALL OR CEILING MOUNT YOUR TELEVISION ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television. ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL). ALWAYS follow all instructions supplied by the television and mount manufacturers. ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer. Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation. MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions. ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight. NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb. ALWAYS make sure your older CRT television does not hang over the edge of your furniture. CE.org/safety