MDS 100 LINE MULTIPLIER, SCAN CONVERTER AND SWITCHER

Transcription

1 5 INPUTS WITH ASSOCIATED AUDIO 2 SIMULTANEOUS CONVERSIONS: PC/TV AND TV/PC WIDE RANGE OF CORRECTIONS AND ADJUSTMENTS MUTE AUDIO FUNCTION ON BOTH OUTPUTS OSD ON BOTH OUTPUTS MAINTENANCE OF PRESETTINGS POSSIBILITY OF RECALLING PRESELECTIONS CAN BE FULLY CONTROLLED BY PC REMOTE CONTROL MDS100-M (28/08/08) 1

2 INSTALLATION AND USE OF THE MDS 100 INDEX 1.0 Overview 2.0 Power supply 3.0 Presettings 4.0 Installation 5.0 Selection of sources 6.0 OSD functions 7.0 Computer control 8.0 Accessories 9.0 Technical data 10.0 Note Please read this manual carefully before installing the MDS100. The manufacturers shall not be answerable for damage resulting from the use, proper or otherwise, of their products. Product data and specifications are subject to change without prior notice. 2

3 1.0 OVERVIEW Thank you for choosing this product. Check that the following items are included in the packaging: The MDS unit This handbook The mains cable IR control Floppy disk with the application software for PC control The MDS100 unit comprises two format converters: it can convert the standard TV signal into an SVGA graphic signal and the SVGA signal sent by a computer into the standard Pal and Y/C TV formats. The choice of 3 video inputs and 2 computer inputs with relative associated audio make the MDS100 the ideal solution for multimedial presentations. 3

4 A single SVGA output towards the video projector is an important feature of presentation systems. Likewise, a Pal or Y/C output for recording or remote forwarding of images is also useful. "System with MDS100" 4

5 2.0 POWER SUPPLY The MDS100 unit must be powered by 230 Vac 50Hz by means of the cable supplied. Plug the cable outlet into the relative panel plug situated to the left of the unit s rear wall. The panel plug is equipped with a fuse-holder for 5X20 fuses. In the event of fuse burnout, the replacement fuse must be of the same value, as specified on the back of the unit. All operations must be performed by specialized personnel who must be made aware of electric shock hazards. In some countries the current plug must be adapted to comply with local standard types. Wires can be identified according to the following code: -Brown PHASE (Marked with the letter L, may be red) -Blue NEUTRAL (Marked with the letter N, may be black ) -Yellow/Green GROUND (Marked with the letter E, may be green) Grounding is compulsory 5

6 3.0 PRESETTINGS The unit hardware has no jumper presettings. All functions are controlled by means of the keyboard and OSD (On Screen Display) or by the PC, using the connection software provided with the unit. 4.0 INSTALLATION a) Check that all units to be installed are disconnected. b) Connect the Pal sources to the two RCA sockets marked Pal1 IN and Pal2 IN VHS as source could not be visualized correctly on a LCD destination c) Connect the Y/C source to the mini-din connector marked Y/C IN d) Connect the computer sources to the HDD15p.f. connectors marked SVGA IN PC1 and PC2 e) Connect the computer destination (video projector or multiscan monitor) to the HDD15p.f. connector marked SVGA OUT and the TV standard destination to the RCA and 4-pin mini-din connectors marked VIDEO OUT Pal and Y/C. If the destination is a device LCD a VHS input could not be visualized correctly If the length of the cable used to connect the computer destination exceeds 10m. we recommend the use of an INBOX/4 as amplifier If the length of the cable used to connect the TV destination exceeds 30m. we recommend the use of a DA124 as amplifier/distributor f) Connect the stereo audio output from the 5 sources to the 5 stereo RCA sockets marked AUDIO IN. g) Connect the AUDIO OUT stereo audio outputs to the destinations, bearing in mind that the contents of the 2 outputs may differ. h) Connect the control PC as described in chapter 7.0, if required. i) Make the Vac power supply connections as described in chapter 2.0 and check on the front panel that the leds related to the Pal1 input for both outputs light up. j) Energize the sources and destinations. The source connected to the Pal1 input must be displayed on both destinations. 6

7 5.0 SELECTION OF SOURCES The sources must be selected separately for each of the 2 outputs. Selection is sequential and is effected by means of a pushbutton. When one of the 5 leds that represent the various inputs lights up, this indicates which input is present to the output. If PC inputs are selected on the SVGA output, these move towards the output without any further processing. If PAL and Y/C inputs are selected towards the Pal and Y/C output, these move towards the output without any further processing. When the unit is switched on, the Pal1 input is automatically activated on both outputs. 6.0 OSD FUNCTIONES (On Screen Display) OSD, for both outputs, can be controlled by means of the remote control provided. For real-time use, the MUTE AUDIO on each output can also be controlled from the keyboard. Hold down the selection key for 3 seconds to activate mute audio on the output Hold down the selection key for a further 3 seconds to deactivate mute mode. The remote control can be deactivated and reactivated from the keyboard. Hold down both selection keys to deactivate remote control. Hold down the selection keys for a further 3 seconds to reactivate remote control. 7

8 The following functions can be controlled by means of remote control: 1) Real-time selection of the source to be directed to the Pal output 2) Real-time selection of the source to be directed to the SVGA output 3) Mute audio on the Pal output 4) Mute audio on the SVGA output 5) OSD on the Pal output 6) OSD on the SVGA output OSD on the Pal output is only active if the PC1 or PC2 input has been selected OSD on the SVGA output is only active if the Pal1, Pal2 or Y/C input has been selected Both OSDs are managed by the commands: SEL (Select),,+ and OFF. 6.1 OSD on Pal output. The first 4 settings adjust the video image DISPLAY ADJ (Horiz. & Vert.) PAN IMAGE (Horiz. & Vert.) Moves the entire image on the screen Scrolls the image across the screen H Scale ratio Expands the image horizontally V Scale ratio Expands the image vertically Zoom Image Zooms in onto the image With Zoom Image set to ON the PAN IMAGE can be used to display a specific area of the image. BRIGHTNESS (4 levels) Adjusts image brightness ANTIFLICKER (8 levels) Controls the antiflicker function FREEZE Freezes the image CHROMA FILTER Restricts the chrominance band ENHANCE SVIDEO COLOUR Enhances the colours on the Y/C output BLACK/WHITE Sets the image to B/W BARS Generates bars to 75% MUTE AUDIO Sets the Pal output audio to zero SAVE SETTINGS Saves the video image adjustment settings (8 settings possible)) 8

9 RECALL SETTINGS Recalls the stored settings (8 settings re-callable) SET DEFAULT PARAMETERS SAVE and EXIT Returns to standard image parameters Exits and saves the settings activated by the input that is currently active. The SAVE and EXIT function can be activated alternately with inputs PC1 and PC2 in order to always obtain the same image. 6.2 OSD on SVGA output PICTURE ADJUST BRIGHTN CONTRAST SATUR MUTE AUDIO MUTE VIDEO GAMMA CORRECT BORDER COLOURS BORDER VISIBLE ADVANCED FUNCTION: HOR SYNC VER SYNC ALIASING INPUT AMPLIF POOR SIGNAL SPECIAL EFFECTS: FILTER R FILTER G FILTER B NEGATIVE DIGITIZ NORMAL DEFAULT VALUE Enables adjustment of image dimensions Enables brightness adjustment Enables contrast adjustment Enables saturation adjustment Sets the output audio level to zero Obscures the image Inserts the Gamma correction on the RGB signals Enables the definition of border colour Inserts image border H sync polarity setting V sync polarity setting Insertion of the antialiasing filter on the input signal Increases input signal amplitude Enhances image content Removes the R signal from the image Removes the G signal from the image Removes the B signal from the image Displays the negative image Reduces image quantization (Solarization) Removes all special effects Returns to standard image parameters 9

10 7.0 COMPUTER CONTROL All functions of the MDS100 unit can be controlled by computer. Standard equipment includes two floppy disks containing the application software. Connect the serial port of the computer as illustrated in the drawing below. For installation, recalling and available software functions, refer to the instructions provided with the floppy disk. 8.0 ACCESSORIES The MDS100 unit is provided with the following standard equipment: - The mains cable - Floppy disk with the application software for PC control -IR control The following equipment is available upon request: VGA cables of various lengths for connection to destination (refer. to list of accessories). 10

11 9.0 TECHNICAL DATA VIDEO: AUDIO: Inputs :N 2 CVBS with RCA socket Inputs :N 5 stereo with RCA N 1 Y/C with Mini-Din socket N 2 PC with HDD15 p.f. Input coupling :AC, unbalanced PC formats compatibility: Input impedance :47KΩ up to 1024X768 70Hz N.I. Input level :+11 dbm Max. Outputs :2, indipendent as follows: Gain :-0.5dB Frequency response :-1 db from 40Hz to High resolution: SVGA 800x600 50Hz with HDD15p.f. 20KHz Sync level: Crosstalk :60 db at 5 KHz TTL Distortion :<0.03% at 0dBm with Sync polarity: 10KΩ load selectable by RS232 or IR control Outputs :2, separated (1 related to output Pal, Standard TV: 1 related to output SVGA) Pal+Y/C with BNC and mini-din 4p. Output load :10KΩ nominal, 600Ω min. Output impedance :100Ω Main input :230Vac 50Hz Power consumption :15VA Size (WXDXH) :483X210X44 Weight :3Kg Operating temp.range :0 45 Safety :according to EN60065 EMC :according to EN and EN CE mark 10.0 NOTE This product is guaranteed for 2 years from the date of purchase. The guarantee does not cover damage to the product caused by improper use or operations effected by third parties For the duration of guarantee Elpro shall repair faulty units free of charge. Faulty units must be sent with a standard waybill and CARRIAGE PAID to Elpro s Turin works. Repaired units shall be returned CARRIAGE FORWARD to the consignee. Faulty units that are no longer covered by guarantee shall be repaired by Elpro EX WORKS Turin and the work shall be charged to the customer. For any problems regarding installation of the MDS100 call the Elpro hot line oppure elprosrl@tin.it 11

12 INDEX OF ACCESSORIES INFOVIDEO LINE Cod. ELPRO ADC 101MM ADC 101 ADC 105 ADC 110 ADC 120 ADC 130 Description Cable HDD 15 p. m./m. 1,5 mt. Cable HDD 15 p. m./f. 1,5 mt. Cable HDD 15 p. m./f. 5,0 mt. Cable HDD 15 p. m./f. 10,0 mt. Cable HDD 15 p. m./f. 20,0 mt. Cable HDD 15 p. m./f. 30,0 mt. ADC 201 Adapter cable HHD 15 p. m./5 BNC ADC 301 MAC Adapter cable DB 15 p. f./hhd 15 p. m. ADC 401 SUN Adapter cable 13W3 f./hhd 15 p. m. ADC 402 SUN Adapter cable 13W3 m./hhd 15 p. f. ADC 501 SGI Adapter cable 13W3 f./hhd 15 p. m. ADC 502 SGI Adapter cable 13W3 m./hhd 15 p. f. ADC 710 Cable for TCR 03 DB 15 p. m./f. 10mt. ADM 001 ADM 010 AC Adapter 230 Vac 50Hz 9V 500mA AC Adapter 230 Vac 50Hz 9V 1000mA ADP 010 Connector DB 15 p. m. with cover ADP 101 VGA Adapter m./m. ADP 102 VGA Adapter f./f. ADP 302 MAC Adapter plug DB 15 p. m./hhd 15 p. f. ADR 2U ADR 3U ADR 2U BLK ADR 3U BLK EP BOX1 EP RACK1 Rack adapter 2U Rack adapter 3U Blank panel 2U Blank panel 3U Kit for wall mounting of EASYPATCH Mounting on 19" of EASYPATCH 12