Description. Specifications

Size: px
Start display at page:

Download "Description. Specifications"

Transcription

1 PW21 Wideband Block Features to 6MHz 7MHz P1dB 23MHz OIP3 19MHz Lead-free / Green / compliant SOT-89 Package Applications Base station / Repeater / Mobile / Automotive / Military FDD-LTE, TD-LTE, TDS-CDMA, CDMA, WCDMA, WiMAX, PCS, GSM, GPS, GPRS, TETRA IoT / Broadcasting / WLAN FM, DMB, DVB, ISM Description The PW21 is a high performance InGaP HBT MMIC Amplifier and consists of Darlington pair amplifiers. The features of PW21 are high linear performance, wideband operation and high reliability. The PW21 operates from a single voltage supply and requires only two DC-blocking capacitors, a bias resistor and an inductor for operation. The device is a general purpose buffer amplifier that offers high dynamic range in a low cost surface-mounted plastic SOT-89 package. All devicesare 1% RF and DC tested. Specifications Parameters Units S21 db S11 db S22 db Functional Diagram 1 / Bias 3 GND 2,4 P1dB dbm OIP3 dbm NF db V / I V/mA 4.74 / 46 Rth C/W 7 1) Test Conditions : T=2 C, =V, Rbias=.6ohm, ohm System 2) OIP3 measured with two tones at an output power of dbm/tone separated by 1MHz. ESD/MSL 1 ESD sensitive device. Observe handling precautions. 2 HBM: Class 2, JESD22-A114 3 CDM: Class C3, JESD22-C11F 4 MSL 3, J-STD-2 Absolute Maximum Ratings Parameter Rating Unit 11 V Current 2 ma RF Power Input 2 dbm Storage Temperature - to 1 C Ambient Operating Temperature -4 to 8 C Junction Temperature 187 C 1) Stresses above the maximum values listed have may cause permanent damage to the device. 2) MTTF is more than 1 years. Products and product information are subject to change without notice. Version.9 1

2 S22 (db) OIP3 (dbm) S21 (db) S11 (db) PW21 Wideband Block Typical RF Performance for 1.9GHz Tuned Application Circuit Bias = 6V, R(bias)= 27 ohm, Current= 46mA Parameters Units S21 db S11 db S22 db P1dB dbm dbm dbm NF db Recommended Bias Values ( V ) R bias Value (ohm) Size RBIAS pF 22nH 6pF 6pF vs. vs Input Input Return Return (GHz) (GHz) Output Output Return Return 3 OIP3 vs. OIP3 vs (GHz) (GHz) Products and product information are subject to change without notice. Version.9 2

3 Output power(dbm) / (db) Output power(dbm) / (db) Output power(dbm) / (db) Output power(dbm) / (db) Id (ma) NF (db) OIP3 (dbm) P1dB (dbm) PW21 Wideband Block 34 OIP3 OIP3 vs. vs Output Output Power Power 2 P1dB P1dB vs. vs MHz 26 19MHz 214MHz 26MHz Output Power (dbm) (GHz) 2 Id vs. Vd Id vs. Vd NF NF vs. vs Vd (V) (GHz) 2 Output Output Power Power / vs vs Input Input Power 9MHz.9GHz 2 Output Output Power Power / / vs Input vs Input 1.9GHz 19MHz Output Power Output Power Input Power (dbm) Input Power (dbm) 2 Output Output Power Power / / vs Input vs Input Power 214MHz 2 Output Output Power Power / / vs Input vs Input 2.6GHz 26MHz Output Power Output Power Input Power (dbm) Input Power (dbm) Products and product information are subject to change without notice. Version.9 3

4 ACLR (dbc) ACLR (dbc) PW21 Wideband Block -3 ACLR vs. Channel 18MHz 3GPP WCDMA 6FA, Test Model TM1+64DPCH, MHz offset -3 ACLR vs. Channel 214MHz 3GPP WCDMA 6FA, Test Model TM1+64DPCH, MHz offset Output Channel Power (dbm) Output Channel Power (dbm) Products and product information are subject to change without notice. Version.9 4

5 S11 (db) S22 (db) S21 (db) PW21 Wideband Block Typical RF Performance for - MHz Tuned Application Circuit Bias = 6V, R(bias)= 27 ohm, Current=46mA Parameters Units S21 db S11 db S22 db P1dB dbm dbm NF db vs. vs RBIAS 2 2 1nF 82nH 1nF 1nF Input Input Return Return Output Output Return Return Products and product information are subject to change without notice. Version.9

6 S21 (db) S11 / S22 (db) S21 (db) S11 / S22 (db) PW21 Wideband Block Typical RF Performance for MHz Tuned Application Circuit (V / 3mA) 9.1ohm Parameters Units S21 db S11 db nF 6nH 1nF 1nF S22 db -1-2 P1dB dbm dbm dbm NF db vs. vs Return Return 2-1 S11 S Typical RF Performance for 3.GHz Tuned Application Circuit (6V / 46mA) 27ohm Parameter Units 3 S21 db 16. S11 db pF 22nH 3.3pF 3.3pF S22 db -12 P1dB dbm 1 dbm dbm 26. 1) Test Board Information : Rogers 43B PCB (Dielectric Constant = 3.48, thick =.8mm(32mil)) 22 vs. vs Return Return 2 - S11 S Products and product information are subject to change without notice. Version.9 6

7 S21 (db) S11 / S22 (db) PW21 Wideband Block Typical RF Performance for.8ghz Tuned Application Circuit (6V / 46mA) 6.8pF 27ohm 4.7nH 6.8pF 6.8pF Parameters Units 8 S21 db 14.3 S11 db -2 S22 db -13 P1dB dbm 11 -3dBm dbm 24. 1) Test Board Information : Rogers 43B PCB (Dielectric Constant = 3.48, thick =.8mm(32mil)) 2 vs. vs Return Return 18-7 S11 S Products and product information are subject to change without notice. Version.9 7

8 PW21 Wideband Block Lead-free /RoHS Compliant / Green SOT-89 Package Outline POOOO X X X X Product Code Lot Number REF. DIMENSIONS (mm) Min. Max. A B.43.8 B C.3.46 D D E E e 1. e1 3. H L Land Pattern Evaluation Board Layout (4x4) Mounting Instructions 1 Use a large ground pad area with many plated through-holes as shown. 2 We recommend 1 oz copper minimum. 3 Measurement for our data sheet was made on.8mm thick FR-4 Board. 4 RF trace width depends on the board material and construction. Add mounting screws near the part to fasten the board to a heatsink. 6 Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. Products and product information are subject to change without notice. Version.9 8

2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. Absolute Maximum Ratings

2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. Absolute Maximum Ratings Device Features OIP3 = 41 dbm @ 14 MHz Gain = 2. db @ 14 MHz Output P1 db = 2. dbm @ 14 MHz NF = 2.7 @ 14MHz at Demo Board Ω Cascadable Lead-free/RoHS-compliant SOT-89 SMT package Typical Performance 1

More information

1 Watt High Linearity, High Gain InGaP HBT Amplifier. Product Description

1 Watt High Linearity, High Gain InGaP HBT Amplifier. Product Description Product Features 18 24 MHz 24.7 db Gain +3 dbm P1dB +46 dbm Output IP3 +V Single Positive Supply Internal Active Bias Lead-free/ RoHS-compliant SOIC-8 & 4xmm DFN Package Applications Mobile Infrastructure

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 28 dbm @ 1900 MHz Gain = 16 db @ 1900 MHz Output P1 db = 15.5 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 7 dbm per tone separated by 1 MHz. Absolute Maximum Ratings

Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 7 dbm per tone separated by 1 MHz. Absolute Maximum Ratings Device Features OIP3 = 32 dbm @ 1900 MHz Gain = 21.5 db @ 1900 MHz Output P1 db = 19 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

Typical Performance 1. 2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. +5V. RFout. Absolute Maximum Ratings

Typical Performance 1. 2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. +5V. RFout. Absolute Maximum Ratings Device Features OIP3 = 41.5 dbm @ 500 MHz Gain = 27 db @ 140 MHz Output P1 db = 21 dbm @ 140 MHz NF = 2.7 @ 70MHz at Demo Board Product Description BeRex s BIG8 is a high performance InGaP/ GaAs HBT MMIC

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 35 dbm @ 1900 MHz Gain = 13.3 db @ 1900 MHz Output P1 db = 18.5 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 30 dbm @ 1900 MHz Gain = 16.4 db @ 1900 MHz Output P1 db = 17 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

GHz Wideband High Linearity LNA Gain Block. Typical Performance 1

GHz Wideband High Linearity LNA Gain Block. Typical Performance 1 Device Features Internally matched to 50 ohms This can be operated at Vd of 3.3V and 4.4V 37.0 dbm Output IP3 at 5dBm/tone at 1900MHz 15.5 db Gain at 1900MHz 22.0 dbm P1dB at 1900 MHz 1.6 db NF at 1900MHz

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features 3 ~ 3.2V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-363 package Application: Driver Amplifier, Cellular, PCS, GSM, UMTS, WCDMA, Wireless

More information

Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 9 dbm per tone separated by 1 MHz. Absolute Maximum Ratings

Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 9 dbm per tone separated by 1 MHz. Absolute Maximum Ratings Device Features OIP3 = 35.5 dbm @ 1900 MHz Gain = 16 db @ 1900 MHz Output P1 db = 19.7 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 39.0 dbm @ 70 MHz Gain = 24 db @ 70 MHz Output P1 db = 20.5 dbm @ 70 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product Description

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 32.5 dbm @ 1900 MHz Gain = 20.9 db @ 1900 MHz Output P1 db = 18.8 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 35 dbm @ 1900 MHz Gain = 16 db @ 1900 MHz Output P1 db = 19.5 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 44.0 dbm @ 70 MHz Gain = 20.3 db @ 70 MHz Output P1 db = 23.5 dbm @ 70 MHz 50 Ω Cascadable Patented over voltage protection Lead-free/RoHS-compliant SOT-89 SMT package Product Description

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features Single Fixed 3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-363 package Application: Driver Amplifier, Cellular, PCS, GSM, UMTS, WCDMA,

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features Single Fixed 3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-363 package Application: Driver Amplifier, Cellular, PCS, GSM, UMTS, WCDMA,

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features Single Fixed 3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-363 package Application: Driver Amplifier, Cellular, PCS, GSM, UMTS, WCDMA,

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 43.0 dbm @ 70 MHz Gain = 17.5 db @ 70 MHz Output P1 db = 20.5 dbm @ 70 MHz 50 Ω Cascadable Patented temperature compensation Patented over voltage protection Lead-free/RoHS-compliant

More information

Not recommended for new designs

Not recommended for new designs Device Features NF = 0.7 db @ 900MHz at RF connectors of Demo board Gain = 19.0 db @ 900 MHz OIP3 = 36.0 dbm @ 1900MHz, 2450MHz Output P1 db = 21.0 dbm @ 900MHz, 22.0 dbm @2450MHz 5V/48mA, MTTF > 100 Years,

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features NF = 0.91 db @ 900MHz at RF connectors of Demo board Gain = 22.0 db @ 900 MHz OIP3 = 36.0 dbm @ 1900MHz, 38.0 dbm @ 2450MHz Output P1 db = 20.5 dbm @ 900/1900/2140 MHz 5V/75mA, MTTF > 100

More information

Features. Specification Min. Typ. Max. Input Return Loss MHz db. Output Return Loss MHz db. Reverse Isolation -22.

Features. Specification Min. Typ. Max. Input Return Loss MHz db. Output Return Loss MHz db. Reverse Isolation -22. Product Description RG512 is a low current and low noise Gain Block Amplifier in a low-cost surface mount package and provides 30dBm high OIP3 and 1.62dB Noise Figure at 1900MHz. It is fabricated on a

More information

4W High Linearity InGaP HBT Amplifier. Product Description

4W High Linearity InGaP HBT Amplifier. Product Description AH42 Product Features 4 27 MHz +3.7 dbm P1dB -49 dbc ACLR @ 26 dbm db Gain @ 2 MHz 8 ma Quiescent Current + V Single Supply MTTF > 1 Years Lead-free/green/RoHS-compliant 12-pin 4xmm DFN Package Applications

More information

FH1. Functional Diagram. Product Description. Product Features. Applications. Typical Performance (6) Specifications (1) Absolute Maximum Rating

FH1. Functional Diagram. Product Description. Product Features. Applications. Typical Performance (6) Specifications (1) Absolute Maximum Rating FH Product Features 5 4 MHz Low Noise Figure 8 db Gain +4 dbm OIP3 + dbm PdB Single or Dual Supply Operation Lead-free/Green/RoHS-compliant SOT-89 Package MTTF > years Applications Mobile Infrastructure

More information

AH125 ½ W High Linearity InGaP HBT Amplifier

AH125 ½ W High Linearity InGaP HBT Amplifier Product Overview The is a high dynamic range driver amplifier in a low-cost surface mount package. The InGaP/GaAs HBT is able to achieve high performance across a broad range with +45 dbm OIP3 and +28

More information

Typical Performance 1

Typical Performance 1 Device Features Internally matched to 50 ohms Operated at 3.0V and 5.0V 37.5 dbm Output IP3 at 0dBm/tone at 700MHz 22.5dB Gain at 700MHz 21.1dBm P1dB at 700 MHz 0.40 db NF at 700MHz on evaluation board

More information

Typical Performance 1

Typical Performance 1 Device Features Internally matched to 50 ohms Operated at 3.0V and 5.0V 36.2 dbm Output IP3 at 0dBm/tone at 1850 MHz 18.5dB Gain at 1850MHz 19.6dBm P1dB at 1850MHz 0.65 db NF at 1850MHz on evaluation board

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 32.0 dbm @ 1900 MHz Gain = 22.2 db @ 1900 MHz Output P1 db = 19.0 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant

More information

50~100MHz. 100~210MHz C2 1nF. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage

50~100MHz. 100~210MHz C2 1nF. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage 0.7~1.4GHz High IIP3 GaAs MMIC with Integrated LO AMP Device Features +31.7 dbm Input IP3 8.8dB Conversion Loss Integrated LO Driver -2 to +2dBm LO drive level Available 3.3V to 5V single voltage MSL 1,

More information

Preliminary Datasheet

Preliminary Datasheet Device Features Operated at 3.0V and 5.0V 35.5 dbm Output IP3 at 0dBm/tone at 3500MHz 16.4 db Gain at 3500 MHz 20.1 dbm P1dB at 3500MHz 0.67 db NF at 3500MHz Fast shut down to support TDD systems Lead-free/Green/RoHS

More information

* Notices. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage.

* Notices. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage. 1.7~2.7GHz High IIP3 GaAs MMIC with Integrated LO AMP Device Features +33.9 dbm Input IP3 8.3dB Conversion Loss Integrated LO Driver -2 to +4dBm LO drive level Available 3.3V to 5V single voltage MSL 1,

More information

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V * Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized

More information

Monolithic Amplifier GVA-60+ Flat Gain, High IP to 5 GHz. The Big Deal

Monolithic Amplifier GVA-60+ Flat Gain, High IP to 5 GHz. The Big Deal Flat Gain, High IP3 Monolithic Amplifier 50Ω 0.01 to 5 GHz The Big Deal Excellent Gain Flatness and Return Loss over 50-1000 MHz High IP3 vs. DC Power consumption Broadband High Dynamic Range without external

More information

GHz High Dynamic Range Amplifier

GHz High Dynamic Range Amplifier Features.2 to 6. GHz Range +41 dbm Output IP3 1.7 db db +23 dbm P1dB LGA Package Single Power Supply Single Input Matching The is a high dynamic range amplifier designed for applications operating within

More information

Features. Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Min. Typ. Max. Units v. DOWNCONVERTER, - GHz Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radios Features Conversion

More information

Features. = +25 C, Vs = 5V, Vpd = 5V

Features. = +25 C, Vs = 5V, Vpd = 5V v1.117 HMC326MS8G / 326MS8GE AMPLIFIER, 3. - 4. GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional

More information

HMC581LP6 / 581LP6E MIXERS - SMT. HIGH IP3 RFIC DUAL DOWNCONVERTER, MHz. Typical Applications. Features. Functional Diagram

HMC581LP6 / 581LP6E MIXERS - SMT. HIGH IP3 RFIC DUAL DOWNCONVERTER, MHz. Typical Applications. Features. Functional Diagram Typical Applications The HMC1LP6 / HMC1LP6E is ideal for Wireless Infrastructure Applications: GSM, GPRS & EDGE CDMA & W-CDMA Cellular / 3G Infrastructure Functional Diagram Features +26 dbm Input IP3

More information

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V * Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized

More information

OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram v1.111 LO AMPLIFIER, 1.7-4. GHz Typical Applications The HMC215LP4 / HMC215LP4E is ideal for Wireless Infrastructure Applications: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM &

More information

Features. = +25 C, Vdd = +7V, Idd = 820 ma [1]

Features. = +25 C, Vdd = +7V, Idd = 820 ma [1] Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Functional Diagram Features Saturated

More information

QPL GHz GaN LNA

QPL GHz GaN LNA General Description The is a wideband cascode low noise amplifier fabricated on Qorvo s 0.25um GaN on SiC production process. This cascode LNA is robust to 5W of input power with 17dB typical gain and

More information

CMD197C GHz Distributed Driver Amplifier

CMD197C GHz Distributed Driver Amplifier Features Functional Block Diagram Wide bandwidth High linearity Single positive supply voltage On chip bias choke Pb-free RoHs compliant 4x4 mm SMT package Description The CMD197C4 is a wideband GaAs MMIC

More information

Features. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V*

Features. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V* v3.1 LO AMPLIFIER, 7 - MHz Typical Applications The HMC684LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +32

More information

HMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V

HMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V Typical Applications High Dynamic Range Infrastructure: GSM, GPRS & EDGE CDMA & W-CDMA Cable Modem Termination Systems Functional Diagram Features +34 dbm Input IP3 Conversion Loss: db Low LO Drive: -2

More information

Power Amplifier 0.5 W 2.4 GHz AM TR Features. Functional Schematic. Description. Pin Configuration 1. Ordering Information

Power Amplifier 0.5 W 2.4 GHz AM TR Features. Functional Schematic. Description. Pin Configuration 1. Ordering Information Features Ideal for 802.11b ISM Applications Single Positive Supply Output Power 27.5 dbm 57% Typical Power Added Efficiency Downset MSOP-8 Package Description M/A-COM s is a 0.5 W, GaAs MMIC, power amplifier

More information

DC-6.0 GHz 1.0W Packaged HFET

DC-6.0 GHz 1.0W Packaged HFET Features 46. dbm OIP3 @.8 GHz 1. db Gain @ 2 GHz.0 db Gain @ 6 GHz 30.0 dbm P1dB SOT-89 Package Functional Block Diagram General Description The X is a high linearity Hetrojunction Field Effect Transistor

More information

MH1A. Product Features. Product Description. Functional Diagram. Applications. Specifications (1) Absolute Maximum Rating. Ordering Information

MH1A. Product Features. Product Description. Functional Diagram. Applications. Specifications (1) Absolute Maximum Rating. Ordering Information Product Features +3 dbm IIP3 RF: 1 2 MHz LO: 1 1 MHz IF: 2 MHz +1 dbm Drive Level Lead-free/green/RoHS-compliant SOIC- SMT package No External Bias Required Applications 2.G and 3G GSM/CDMA/wCDMA Optimized

More information

TGL2209 SM 8 12 GHz 50 Watt VPIN Limiter

TGL2209 SM 8 12 GHz 50 Watt VPIN Limiter Product Overview The Qorvo is a high power, X-band GaAs VPIN limiter capable of protecting sensitive receive channel components against high power incident signals. The does not require DC bias, and achieves

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The is ideal

More information

Product Description. Ordering Information. GaAs HBT GaAs MESFET. InGaP HBT

Product Description. Ordering Information. GaAs HBT GaAs MESFET. InGaP HBT InGaP HBT MMIC Amplifier 5MHz to 3MHz RFGA244 InGaP HBT MMIC AMPLIFIER 5MHz TO 3MHz Package: SOT-89 Features Low Cost Broadband Gain Internally Matched Internal Active Bias No Dropping Resistor Single

More information

RFOUT/ VC2 31 C/W T L =85 C

RFOUT/ VC2 31 C/W T L =85 C 850MHz 1 Watt Power Amplifier with Active Bias SPA-2118(Z) 850MHz 1 WATT POWER AMPLIFIER WITH ACTIVE BIAS RoHS Compliant and Pb-Free Product (Z Part Number) Package: ESOP-8 Product Description RFMD s SPA-2118

More information

TGA2218-SM GHz 12 W GaN Power Amplifier

TGA2218-SM GHz 12 W GaN Power Amplifier Applications Satellite Communications Data Link Radar Product Features Functional Block Diagram Frequency Range: 13.4 16.5 GHz PSAT: > 41 dbm (PIN = 18 dbm) PAE: > 29% (PIN = 18 dbm) Large Signal Gain:

More information

QPC6222SR GENERAL PURPOSE DPDT TRANSFER SWITCH. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information

QPC6222SR GENERAL PURPOSE DPDT TRANSFER SWITCH. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information Product Overview The is a dual-pole double-throw transfer switch designed for general purpose switching applications where RF port transfer (port swapping) control is needed. The low insertion loss along

More information

Features. Parameter Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Units HMCBLPE v.. -. GHz Typical Applications The HMCBLPE is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Features Conversion Gain: db Image Rejection:

More information

TGA2807-SM TGA2807. CATV Ultra Linear Gain Amplifier. Applications. Ordering Information. CATV EDGE QAM Cards CMTS Equipment

TGA2807-SM TGA2807. CATV Ultra Linear Gain Amplifier. Applications. Ordering Information. CATV EDGE QAM Cards CMTS Equipment Applications CATV EDGE QAM Cards CMTS Equipment 28-pin 5x5 mm QFN Package Product Features Functional Block Diagram 40-000 MHz Bandwidth DOCSIS 3.0 Compliant ACPR: -69 dbc at 6 dbmv Pout Pdiss:.9 W.5 db

More information

10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B

10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B Data Sheet FEATURES Passive; no dc bias required Conversion loss 8 db typical for 1 GHz to 18 GHz 9 db typical for 18 GHz to 26 GHz LO to RF isolation: 4 db Input IP3: 19 dbm typical for 18 GHz to 26 GHz

More information

Absolute Maximum Ratings Parameter Rating Unit Max Supply Current (I C1 ) at V CC typ. 150 ma Max Supply Current (I C2 ) at V CC typ. 750 ma Max Devic

Absolute Maximum Ratings Parameter Rating Unit Max Supply Current (I C1 ) at V CC typ. 150 ma Max Supply Current (I C2 ) at V CC typ. 750 ma Max Devic 850MHz 1 Watt Power Amplifier with Active Bias SPA2118Z 850MHz 1 WATT POWER AMPLIFIER WITH ACTIVE BIAS Package: Exposed Pad SOIC-8 Product Description RFMD s SPA2118Z is a high efficiency GaAs Heterojunction

More information

Features. = +25 C, Vdd = +4.5V, +4 dbm Drive Level

Features. = +25 C, Vdd = +4.5V, +4 dbm Drive Level Typical Applications The is ideal for: Clock Generation Applications: SONET OC-192 & SDH stm-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Sensors Features High Output Power: +21

More information

QPL6216TR7 PRELIMINARY. Product Description. Feature Overview. Functional Block Diagram. Applications. Ordering Information. High-Linearity SDARS LNA

QPL6216TR7 PRELIMINARY. Product Description. Feature Overview. Functional Block Diagram. Applications. Ordering Information. High-Linearity SDARS LNA Product Description The is a high linearity, ultra-low noise gain block amplifier in a small 2x2 mm surface-mount package. At 2332 MHz, the amplifier typically provides +36 dbm OIP3. The amplifier does

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.511 Typical Applications Features

More information

DATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier

DATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier DATASHEET ISL008 NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART ISL01 Data Sheet MMIC Silicon Bipolar Broadband Amplifier FN21 Rev 0.00 The ISL00, ISL007, ISL008 and ISL009, ISL0, ISL011

More information

1.5 GHz to 4.5 GHz, GaAs, MMIC, Double Balanced Mixer HMC213BMS8E

1.5 GHz to 4.5 GHz, GaAs, MMIC, Double Balanced Mixer HMC213BMS8E FEATURES Passive: no dc bias required Conversion loss: 1 db typical Input IP3: 21 dbm typical RoHS compliant, ultraminiature package: 8-lead MSOP APPLICATIONS Base stations Personal Computer Memory Card

More information

OBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram

OBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram v3.1 HMC98LC Typical Applications The HMC98LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radio Functional Diagram

More information

TGA4541-SM Ka-Band Variable Gain Driver Amplifier

TGA4541-SM Ka-Band Variable Gain Driver Amplifier Applications VSAT Point-to-Point Radio Test Equipment & Sensors Product Features 441 1347 717 QFN 6x6mm L Functional Block Diagram Frequency Range: 28 31 GHz Power: 23 dbm P1dB Gain: 33 db Output TOI:

More information

6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A

6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A FEATURES Conversion loss: 9 db typical Local oscillator (LO) to radio frequency (RF) isolation: 37 db typical LO to intermediate frequency (IF) isolation: 37 db typical RF to IF isolation: db typical Input

More information

TGP2109-SM GHz 6-Bit Digital Phase Shifter. Product Description. Functional Block Diagram. Product Features. Applications. Ordering Information

TGP2109-SM GHz 6-Bit Digital Phase Shifter. Product Description. Functional Block Diagram. Product Features. Applications. Ordering Information TGP219-SM Product Description The Qorvo TGP219-SM is a packaged 6-bit digital phase shifter fabricated on Qorvo s high performance.15μm GaAs phemt process. It operates over 8 to 12 GHz and provides 36

More information

TGL2210-SM_EVB GHz 100 Watt VPIN Limiter. Product Overview. Key Features. Applications. Functional Block Diagram. Ordering Information

TGL2210-SM_EVB GHz 100 Watt VPIN Limiter. Product Overview. Key Features. Applications. Functional Block Diagram. Ordering Information .5 6 GHz Watt VPIN Limiter Product Overview The Qorvo is a high-power receive protection circuit (limiter) operating from.5-6ghz. Capable of withstanding up to W incident power levels, the allows < dbm

More information

Features. = +25 C, 50 Ohm System

Features. = +25 C, 50 Ohm System v.211 18 Analog Phase Shifter, 2-2 GHz Typical Applications The is ideal for: EW Receivers Military Radar Test Equipment Satellite Communications Beam Forming Modules Features Wide Bandwidth: 2-2 GHz 18

More information

HMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications

HMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications Typical Applications The is ideal for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Sensors Functional Diagram Features High

More information

Features OBSOLETE. LO = +19 dbm, IF = 100 MHz Parameter

Features OBSOLETE. LO = +19 dbm, IF = 100 MHz Parameter Typical Applications The HMC351S8 / HMC351S8E is ideal for: Cellular Basestations Cable Modems Fixed Wireless Access Systems Functional Diagram Electrical Specifications, T A = +25 C Features Conversion

More information

Features. = +25 C, 50 Ohm System

Features. = +25 C, 50 Ohm System v1.111 47 Analog Phase Shifter, Typical Applications The is ideal for: EW Receivers Military Radar Test Equipment Satellite Communications Beam Forming Modules Features Wide Bandwidth: 47 Phase Shift Low

More information

Features. Parameter Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Units Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Features Conversion Gain: db Image Rejection: dbc Input Third-Order

More information

SKY LF: GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier

SKY LF: GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier DATA SHEET SKY67105-306LF: 0.6-1.1 GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier Applications GSM, CDMA, WCDMA, cellular infrastructure systems Ultra low-noise, high gain and high linearity

More information

RF2360 LINEAR GENERAL PURPOSE AMPLIFIER

RF2360 LINEAR GENERAL PURPOSE AMPLIFIER Linear General Purpose Amplifier RF2360 LINEAR GENERAL PURPOSE AMPLIFIER RoHS Compliant & Pb-Free Product Package Style: Standard Batwing Features 5MHz to 1500MHz Operation Internally Matched Input and

More information

SKY LF: 1.5 to 3.8 GHz Two-Stage, High-Gain Low-Noise Amplifier

SKY LF: 1.5 to 3.8 GHz Two-Stage, High-Gain Low-Noise Amplifier DATA SHEET SKY67180-306LF: 1.5 to 3.8 GHz Two-Stage, High-Gain Low-Noise Amplifier Applications LTE, GSM, WCDMA, HSDPA macro-base and micro-base stations S and C band ultra-low-noise receivers Cellular

More information

The Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units

The Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units Typical Applications The Hmc86LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features Electrical Specifications, T

More information

Data Sheet. ALM MHz 915 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description.

Data Sheet. ALM MHz 915 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description. ALM-11136 870 MHz 915 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature Data Sheet Description Avago Technologies ALM-11136 is an easy-to-use GaAs MMIC Tower Mount Amplifier

More information

OBSOLETE HMC423MS8 / 423MS8E MIXERS - DBL-BAL - SMT. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications.

OBSOLETE HMC423MS8 / 423MS8E MIXERS - DBL-BAL - SMT. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Typical Applications The HMC423MS8 / HMC423MS8E is ideal for: Base Stations Portable Wireless CATV/DBS ISM Functional Diagram Electrical Specifications, T A = +25 C Features Integrated LO Amplifi er w/

More information

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz Typical Applications Functional Diagram The HMC28AMS8 / HMC28AMS8E is ideal for: Base Stations PCMCIA Transceivers Cable Modems Portable Wireless Features Ultra Small Package: MSOP8 Conversion Loss: db

More information

RF V W-CDMA BAND 2 LINEAR PA MODULE

RF V W-CDMA BAND 2 LINEAR PA MODULE 3 V W-CDMA BAND 2 LINEAR PA MODULE Package Style: Module, 10-Pin, 3 mm x 3 mm x 1.0 mm Features HSDPA and HSPA+ Compliant Low Voltage Positive Bias Supply (3.0 V to 4.35 V) +28.5 dbm Linear Output Power

More information

DATASHEET ISL Features. Ordering Information. Applications. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier

DATASHEET ISL Features. Ordering Information. Applications. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier DATASHEET ISL551 MMIC Silicon Bipolar Broadband Amplifier NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART ISL551 FN28 Rev. The ISL551 is a high performance gain block featuring a Darlington

More information

Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V

Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V v4.414 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Integrated LO Amplifier: -4

More information

Features OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1]

Features OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1] v2.614 Typical Applications The HMC412AMS8G / HMC412AMS8GE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Functional Diagram Features General Description Parameter Min. Typ. Max. Units Frequency

More information

GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A

GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A FEATURES Conversion loss: db LO to RF isolation: db LO to IF isolation: 3 db Input third-order intercept (IP3): 1 dbm Input second-order intercept (IP2): dbm LO port return loss: dbm RF port return loss:

More information

TGC2610-SM 10 GHz 15.4 GHz Downconverter

TGC2610-SM 10 GHz 15.4 GHz Downconverter Applications VSAT Point-to-Point Radio Test Equipment & Sensors -pin 5x5 mm QFN package Product Features Functional Block Diagram RF Frequency Range: 15. GHz IF Frequency: DC GHz LO Frequency: 19 GHz LO

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v4.414 Typical Applications Features

More information

Features. = +25 C, IF = 1 GHz, LO = +13 dbm*

Features. = +25 C, IF = 1 GHz, LO = +13 dbm* v.5 HMC56LM3 SMT MIXER, 24-4 GHz Typical Applications Features The HMC56LM3 is ideal for: Test Equipment & Sensors Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Functional Diagram

More information

Data Sheet. ALM MHz 870 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description.

Data Sheet. ALM MHz 870 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description. ALM-11036 776 MHz 870 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature Data Sheet Description Avago Technologies ALM-11036 is an easy-to-use GaAs MMIC Tower Mount Amplifier

More information

HMC219AMS8 / 219AMS8E. Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz

HMC219AMS8 / 219AMS8E. Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz Typical Applications The HMC219AMS8 / HMC219AMS8E is ideal for: UNII & HiperLAN ISM Microwave Radios Functional Diagram Features Ultra Small Package: MSOP8 Conversion Loss: 8.5 db LO / RF Isolation: 25

More information

SUNSTAR 微波光电 TEL: FAX: v HMC750LP4 / 750LP4E 12.5 Gbps LIMITING AMPLIFIER

SUNSTAR 微波光电   TEL: FAX: v HMC750LP4 / 750LP4E 12.5 Gbps LIMITING AMPLIFIER Typical Applications The HMC75LP4(E) is ideal for: OC-192 Receivers Gbps Ethernet Receivers Gbps Fiber Channel Receivers Broadband Test & Measurement Functional Diagram Features Electrical Specifications,

More information

TGP2108-SM 2.5-4GHz 6-Bit Digital Phase Shifter

TGP2108-SM 2.5-4GHz 6-Bit Digital Phase Shifter TGP218-SM Product Description The Qorvo TGP218-SM is a packaged 6-bit digital phase shifter fabricated on Qorvo s high performance.15 um GaAs phemt process. It operates over 2.5-4 GHz while providing 36

More information

SKY LF: GHz Ultra Low-Noise Amplifier

SKY LF: GHz Ultra Low-Noise Amplifier PRELIMINARY DATA SHEET SKY67151-396LF: 0.7-3.8 GHz Ultra Low-Noise Amplifier Applications LTE, GSM, WCDMA, TD-SCDMA infrastructure Ultra low-noise, high performance LNAs Cellular repeaters High temperature

More information

OBSOLETE HMC422MS8 / 422MS8E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

OBSOLETE HMC422MS8 / 422MS8E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram v4.712 Typical Applications The HMC422MS8 / HMC422MS8E is ideal for: MMDS & ISM Wireless Local Loop WirelessLAN Cellular Infrastructure Functional Diagram Electrical Specifications, T A = +2 C Features

More information

= +25 C, IF= 100 MHz, LO = +17 dbm*

= +25 C, IF= 100 MHz, LO = +17 dbm* v3.514 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Wide IF Bandwidth: DC - 3.5

More information

Features. PFD Output Voltage 2000 mv, Pk - Pk. PFD Gain Gain = Vpp / 2π Rad khz 100 MHz Square Wave Ref.

Features. PFD Output Voltage 2000 mv, Pk - Pk. PFD Gain Gain = Vpp / 2π Rad khz 100 MHz Square Wave Ref. HMC98LP5 / 98LP5E Typical Applications The HMC98LP5(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Functional Diagram Features Ultra

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC148* Product Page Quick Links Last Content Update: 11/1/216 Comparable

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units v1.214 HMC163LP3E Typical Applications The HMC163LP3E is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Sensors Functional Diagram Features

More information

HMC412MS8G / 412MS8GE

HMC412MS8G / 412MS8GE v.91 HMC4MS8G / 4MS8GE MIXER, 9. - 15. GHz Typical Applications The HMC4MS8G / HMC4MS8GE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Features Conversion Loss: 8. db Noise Figure: 8. db

More information

TGC4546-SM GHz Upconverter with Quadrupler

TGC4546-SM GHz Upconverter with Quadrupler Applications Point-to-Point Radio TriQuint TGC4546 1326 MAL ACQ285 28-pin 5x5mm QFN package Product Features RF Frequency Range: 36 45 GHz IF Frequency: DC 3.5 GHz LO Frequency: 8.1 10.4 GHz LO Input Power:

More information

TGA2627-SM 6-12 GHz GaN Driver Amplifier

TGA2627-SM 6-12 GHz GaN Driver Amplifier Applications Commercial and Military Radar Communications Electronic Warfare (EW) Product Features Functional Block Diagram Frequency Range: 6-12 GHz Push-Pull Configuration Low Harmonic Content; -4 dbc

More information

CMD257C GHz High IP3 I/Q Mixer. Features. Functional Block Diagram. Description

CMD257C GHz High IP3 I/Q Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High IP3 Image rejection: 3 db Wide IF bandwidth Pb-free RoHs compliant 4x4 mm SMT package Description The is a high IP3 I/Q mixer in a leadless surface

More information