DIGITAL READOUT SYSTEMS

Size: px
Start display at page:

Download "DIGITAL READOUT SYSTEMS"

Transcription

1 DIGITAL READOUT SYSTEMS improve the productivity and accuracy of manually operated machines

2 RSF Elektronik, Corporate Head Quarters Tarsdorf, Austria RSF Elektronik, Manufacturing Subsidiary Chotešov, Czech Republic High-precision linear measuring systems and industrial electronics "Made in Austria" for cutting-edge positioning solutions RSF Elektronik is one of the world's leading companies in the field of electronic linear measuring systems and it offers an extensive portfolio which includes almost all designs which are required by the market. The typical resolutions or measuring steps range from a few micrometres down to the nanometre range. Another core element of the product range are high-precision and resistant graduations which are manufactured in thin-layer technology on glass or other carrier substrates. RSF Elektronik also develops customized cable systems for the widest range of sectors and areas of application, and these are manufactured by the Chotešov subsidiary. In order to safeguard the company's high quality standard, a comprehensive quality assurance and environmental management system certified according to DIN EN ISO 9001 and DIN EN ISO has been put in place. Thanks to the company's extensive distribution network, optimum customer service is guaranteed in practically all regions. 02

3 IMPROVE ACCURACY AND PRODUCTIVITY BY USING DIGITAL READOUT SYSTEMS In a competitive market, using the latest technology to improve your productivity is essential. Adding a Digital Readout and Linear Encoders is one of the best ways to make a machine tool more profitable. The productivity and value of your machine tool will be increased when using an RSF Elektronik Digital Readout and Linear Encoders. Regardless of the machine tool, old or new, standard or special use, RSF Elektronik has the Digital Readout and Linear Encoders for your machine and application. Advantages of using Digital Readout Systems from RSF Elektronik Digital Readouts from RSF Elektronik can be mounted quickly and easily to your machine tool. Installation is simple using available mounting hardware. The Digital Readout displays the exact tool position at all times. No longer does the machine operator need to count handwheel turns or keep track of the dial position. Linear Encoders from RSF Elektronik measure the machine travel directly at the machine guideway. Lead screw error and backlash have no influence on the measuring accuracy. If your have questions during the Digital Readout or Linear Encoder installation, do not hesitate to contact our company or nearest RSF agent. A complete Digital Readout System Advantages and Profit Analysis Technical Data Components of a Digital Readout System Operating principle of a Digital Readout System Mounting location of a Digital Readout System Digital Readout System advantages Profit from adding a RSF Elektronik Digital Readout System The Z 300 DRO for all purposes Accessory (optional) External Input/Output Unit IFB Linear Encoders: MSA 650 Series MSA 651 Series MSA 350 Series MSA 352 Series Other RSF Elektronik Products RSF Elektronik Ges.m.b.H. Exposed and Sealed Linear Encoders, Probes, Rotary Encoders Distribution Contacts

4 THE DIGITAL READOUT SYSTEM Components of a complete Digital Readout System The system consists of one or more Linear Encoders, commonly referred to as scales, and a Digital Readout. The Linear Encoder measures the machine travel and the Digital Readout (sometimes called a DRO) displays the distance moved or machine table position to the operator. Core elements of RSF Elektronik Linear Encoders A Linear Encoder consists of two components: 1. the scale (extrusion/glass combination) and 2. the scanning head (reading head). The scale unit consists of a high accuracy graduation pattern printed on glass spar. A metal extrusion holds and protects the glass. Special shaped rubber sealing lips in the extrusion keep out coolants and contamination. The scanning head has a dual guided carriage to maintain alignment with the glass scale. The design of the scanning head carriage allows for a large mounting tolerance without affecting the accuracy of the scale. The glass scale is opto-electrically scanned using LEDs, photodiodes and a reticle. Operation mode of RSF Elektronik Digital Readout Systems The opto-electronics in the Linear Encoder scanning head convert distance movement into quadrature square-wave signals. These signals are transmitted to the Digital Readout, which in turn displays the distance moved or table position. Linear Encoders from RSF have reference index marks. The reference index marks are a very useful features if the Digital Readout loses power or if power is turned off. Linear Encoders from RSF Elektronik are also available with distance-coded reference marks: after travelling 20 mm the absolute position will be recalled on the display. Mounting a Digital Readout System on your machine To get the best accuracy, a Linear Encoder should be mounted as near as possible to the machine guideway. When mounted at guideway, the true guideway travel is measured, without an ABBE offset error. Neither lead screw error or backlash from a sloppy ball nut or hand wheel has any influence on the accuracy of the display position. The Digital Readout is mounted to the machine by a support arm/tray. This allows the machine operator easy access to the display for operation and reading the display. 04

5 THE ADVANTAGES OF A DIGITAL READOUT SYSTEM Advantages of a Digital Readout System Profitting from a RSF Elektronik Digital Readout System In the past, the operator of a machine tool without a Digital Readout System had to concentrate on reading and keeping track of the handwheel vernier dial. After a brief review of the Digital Readout System operations manual, you will immediately work faster with better accuracy. Scrapped and rejected parts will be reduced. The display shows the position in clear and bright digits. Digital Readouts from RSF Elektronik have more features than just displaying position. Refer to the specific models for a listing of the features. The RSF Digital Readout has a waterproof keypad and a rugged metal housing to ensure error free operation under harsh workshop conditions. Thread holes on the housing floor enable a simple mounting. Minimize your work time at the machine. Reduce the scrap rate and save material. Increase the accuracy and productivity of the machine. Decrease the time to move to the next position up to 63%. Investment pay back is achieved very fast. Example: A milling machine with table travel of: 700 x 400 x 450 mm The purchase and the mounting of the digital readout costs: about Euro 2.800, Profit and production increasing: mind. 20 % Working time: 135 h/month Machine costs per hour: Euro 60, /h Economies from machine changes: 20 % x Euro 60, x 135 h = Euro 1.620, /month 100 % h months Amortization: Euro 2.800, Euro 1.620, /month = 1.7 months 05

6 Z 300 OVERVIEW The Digital Readout Z 300 is especially suited for use on milling, drilling and boring machines and lathes with up to three axes. A separate I/O unit provides switching input/outputs for simple tasks in automation (optional: IFB 48). Description The Z 300 display unit is designed as a sturdy upright unit with splash-proof fulltravel keypad for use in a workshop. It is equipped with a monochrome flat screen for position values, dialog and input displays, graphic functions and graphic positioning support. Functions The Z 300 display unit is characterized by its plain language dialog guidance. The distance-to-go display facilitates positioning. You approach the next position quickly and reliably by simply traversing until the display reads zero. The functions for each application are easily activated by parameter input. Special functions are available for producing hole patterns (linear patterns and circular patterns). Datums can be determined quickly and accurately with an edge finder. The Z 300 readout supports you with special probing functions. You can easily switch between radius and diameter display when the position display is configured for turning. The readout also offers support for lathes with separate top slide: The sum display feature allows you to display the saddle and top slides together or separately. To set a datum, touch the workpiece and freeze the tool position. Then retract and measure the workpiece. Data interfaces The Z 300 features an RS-232-C/V.24 serial interface for measured value transfer to a PC or printer, for input/output of parameters and compensation value lists and for diagnostics. Mounting Z 300 is conceived as an upright unit. Mounting possibilities: Threaded mounting holes M6 and M8 on the housing floor Mounting frame (optional) Mounting frame (optional accessory) ID For mounting the digital readout in a housing or operating panel. 06

7 Z 300 TECHNICAL DATA Features Axes 2 or 3 Encoder inputs Display steps* Display Status display Functions Mode: milling/drilling/boring Mode: turning Error compensation Data interface RS-422 inputs for quadrature signals and reference pulse Adjustable, max. 7 digits Linear axes: 1 mm to mm Angular axes: 1 to ( ) 5.7 " monochrome flat-panel display for position values, dialogs and inputs, and soft keys Tool, reference point, operating function, feed rate, ABS/INC, mm/inch, stopwatch 10 datums 16 tools REF reference mark evaluation for distance-coded or single reference marks Distance-to-go mode Scaling factor mm/inch switching Absolute/incremental display On-screen help and operating instructions Graphic positioning support ("Near Zero" warning) Calculator Calculation of positions for hole patterns (circular patterns as well as linear patterns) Tool radius and tool length compensation Probing functions for reference-point acquisition with KT edge finder: "Edge," "Centerline" and "Circle center" Linear hole patterns, bolt hole circles Taper calculator Radius/diameter switching Freezing the tool position for back-off Vectoring: X/Z display of the traverse path with inclined top slide Sum displays for Z and ZO (axis coupling) Axis error: Linear and multipoint over up to 200 correction points Backlash compensation: for compensation of reversal error V.24/RS-232-C: 300 to Baud Switching I/O Input for edge finder (with switching signal or contact triggering) Further inputs/outputs over the IFB 48 external input/output unit Accessories Mounting frame, external input/output unit IFB 48 Main power input 100 V AC to 240 V AC ( 10 % to +10 %), 47 Hz to 63 Hz; max. 135 W Operating temperature 0 C to 45 C Protection EN IP 40, front panel: IP 54 Weight 2.6 kg * depends on the signal period of the connected encoder 07

8 ACCESSORY (optional): EXTERNAL INPUT/OUTPUT UNIT IFB 48 The Z 300 provides applicationdependent additional functions that are available when the IFB 48 external input/output unit is connected. External input/output unit IFB 48 (ID ) The IFB 48 input/output unit is attached to a standard NS 35 rail (DIN or EN ). It is connected to the Z 300 using the touch probe input. LEDs show the power supply, the data transmission and the status of the inputs and outputs. Accessory: Connecting cable complete with connector, between IFB 48 and Z 300 (ID xx) Features 4 switching inputs 9 switching outputs 1 analog output Power supply via Z 300 Cable length 15 m to Z 300 Storage temperature Operating temperature Zero reset of axes 1 to 3 (for milling applications) Recognition of max. 3 operating gears (for turning appl.) External activation of CSS (for turning applications) 8 relay outputs as switching functions (for milling appl.) 1 relay output for readiness 0 to 10 V Turning mode: for constant surface speed Milling mode: for controlling the spindle speed 20 to 70 C 0 to 45 C Distribution cable complete with connectors, for parallel connection of IFB 48 and an edge finder to Z 300 (ID ) The additional functions can be configured on the Z 300 when the IFB 48 is connected. Switching inputs The switching inputs are active when a High signal (contact or pulse) is present. They are isolated and can be supplied externally or internally. Signal level of the switching inputs 0 V U L 1.5 V 4.5 V U H 26 V I L 25 ma t min 100 ms Zero reset In the milling mode, each axis can be set to the display value 0 over an external signal. Detection of gear ranges In the turning mode, three switching inputs are available for the recognition of gear ranges. 08

9 Switching outputs The IFB 48 features nine floating relay outputs. Readiness The readiness output is at LOW level if the Z 300 cannot operate the IFB (e. g. not switched on, cable disconnected). Switching functions (milling mode) One or more switching ranges or switching points can be defined for an axis. Switch-off ranges lie symmetrically to the 0 display value. If switching points are used, the relay activates when the position display reaches a specific value. You can set whether the switching function should apply to the actual value or distance-to-go mode the relay will open or close when the condition is met or the relay remains activated as long as the switching condition is met (continuous mode) or for a specified duration (pulsed mode). Analog output Constant surface cutting speed CSS (only in turning applications) CSS provides spindle speed control as the diameter of the workpiece changes. A speed command signal is sent to the inverter of the spindle motor via the analog interface (DAC 0 V to 10 V) of the IFB 48. The maximum and minimum permissible spindle speeds can be specified. In addition, a maximum of three operating gears can be taken into account. The Z 300 recognize the current gear selection by means of the switching inputs of the IFB 48. CSS control can also be started remotely (via an input to the CSS board) with an external switch. Controlling the spindle speed (only in milling applications) With the analog outputs, the speed of the spindle on milling machines can be controlled in an open controlled loop. A spindle speed can be assigned to each tool defined in the tool table. The speed can be manually adapted during machining. 09

10 MSA 650 SERIES - TECHNICAL DATA Features: Max. measuring length: 1740 mm Small cross-section Mounting holes on the extrusion ends One additional center mounting hole for longer measuring lengths Reference marks Scale model System resolution [µm] Accuracy grades [µm/m] Grating pitch [µm] Integrated interpolation Max. velocity [m/s] continuous momentary Square-wave signals with integrated Subdiving Electronics MSA ±10 40 times MSA ±5, ±10 20 times MSA ±5, ±10 40 times MSA ±5, ±10 20 times MSA ±5, ±10 20 times Other accuracy grades or grating pitches (e. g. Inch) on request Standard measuring lengths [mm]: 170, 220, 270, 320, 370, 420, 470, 520, 620, 670, 720, 770, 820, 920, 1040, 1140, 1240, 1340, 1440, 1540, 1640, 1740 Scale unit: Glass scale (α 8.5 x 10 6 /K) Location of the reference marks: - Distance-coded reference marks: after travelling max. 20 mm the absolute position is available - Up to measuring length 920 mm: one reference mark in the middle of the measuring length or 35 mm from both ends of measuring length; measuring length 1040 mm and longer: 45 mm from both ends of measuring length - Optional: one reference mark at any location; additional reference marks by distances of n x 50 mm Permissible temperature 20 C to +70 C (storage) 0 C to +50 C (operation) Weight (approx.): 0.8 kg/m (scale spar) kg (reading head with 3 m cable) Signal output (optional) Square-wave signals (single ended) with integrated Subdividing Electronics Square-wave signals (differential) via Line Driver RS 422 Standard with integrated Subdividing Electronics Power supply: +5 V ±5 %, < 150 ma (without interpolation, unloaded) < 200 ma (with interpolation, unloaded) Required moving force: - With standard sealing lips: < 3 N - With low drag sealing lips: < 0.2 N Environmental sealing acc. EN 60529: With standard sealing lips: IP 53 RoHS-conformity: The Linear Encoders of the MSA 650 series comply with the guideline of the RoHS-directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment 10

11 DIMENSIONS - TOLERANCES - MOUNTING POSSIBILITIES 11

12 MSA 651 SERIES - TECHNICAL DATA Features: Max. measuring length: 2240 mm Small cross-section Mounting via holes in the extrusion for improved vibration behavior Reference marks Scale model System resolution [µm] Accuracy grades [µm/m] Grating pitch [µm] Integrated interpolation Max. velocity [m/s] continuous momentary Square-wave signals with integrated Subdiving Electronics MSA ±10 40 times MSA ±5, ±10 20 times MSA ±5, ±10 40 times MSA ±5, ±10 20 times MSA ,5 ±5, ±10 20 times Other accuracy grades or grating pitches (e. g. Inch) on request Standard measuring lengths [mm]: 170, 220, 270, 320, 370, 420, 470, 520, 620, 670, 720, 770, 820, 920, 1040, 1140, 1240, 1340, 1440, 1540, 1640, 1740, 1840, 2040, 2240 Scale unit: Glass scale (α 8.5 x 10 6 /K) Location of the reference marks: - Distance-coded reference marks: after travelling max. 20 mm the absolute position is available - Up to measuring length 920 mm: one reference mark in the middle of the measuring length or 35 mm from both ends of measuring length; measuring length 1040 mm and longer: 45 mm from both ends of measuring length - Optional: one reference mark at any location; additional reference marks by distances of n x 50 mm Required moving force: - With standard sealing lips: < 3 N - With low drag sealing lips: < 0.2 N Environmental sealing acc. EN 60529: With standard sealing lips: IP 53 Permissible temperature 20 C to +70 C (storage) 0 C to +50 C (operation) Weight (approx.): 0.8 kg/m (scale spar) kg (reading head with 3 m cable) Signal output (optional) Square-wave signals (single ended) with integrated Subdividing Electronics Square-wave signals (differential) via Line Driver RS 422 Standard with integrated Subdividing Electronics Power supply: +5 V ±5 %, < 150 ma (without interpolation, unloaded) < 200 ma (with interpolation, unloaded) RoHS-conformity: The Linear Encoders of the MSA 651 series comply with the guideline of the RoHS-directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment 12

13 DIMENSIONS - TOLERANCES - MOUNTING POSSIBILITIES 13

14 MSA 350 SERIES - TECHNICAL DATA Features: Max. measuring length: 3040 mm Rigid mounting; large cross-section Mounting holes on the extrusion ends Reference marks Additional mounting support for longer measuring lengths Scale model System resolution [µm] Accuracy grades [µm/m] Grating pitch [µm] Integrated interpolation Max. velocity [m/s] continuous momentary Square-wave signals with integrated Subdiving Electronics MSA ±10 40 times MSA ±5, ±10 20 times MSA ±5, ±10 40 times MSA ±5, ±10 20 times MSA ,5 ±5, ±10 20 times Other accuracy grades or grating pitches (e. g. Inch) on request Standard measuring lengths [mm]: 170, 220, 270, 320, 370, 420, 470, 520, 620, 670, 720, 770, 820, 920, 1040, 1140, 1240, 1340, 1440, 1540, 1640, 1740, 1840, 2040, 2240, 2440, 2640, 2840, 3040 Scale unit: Glass scale (α 8.5 x 10 6 /K) Location of the reference marks: - Distance-coded reference marks: after travelling max. 20 mm the absolute position is available - Up to measuring length 920 mm: one reference mark in the middle of the measuring length or 35 mm from both ends of measuring length; measuring length 1040 mm and longer: 45 mm from both ends of measuring length - Optional: one reference mark at any location; additional reference marks by distances of n x 50 mm Required moving force: - With standard sealing lips: < 3 N - With low drag sealing lips: < 0.2 N Environmental sealing acc. EN 60529: - With standard sealing lips: IP 53 - With DA 400: IP 64 Permissible temperature 20 C to +70 C (storage) 0 C to +50 C (operation) Weight (approx.): 3 kg/m (scale spar) kg (reading head with 3 m cable) Signal output (optional) Square-wave signals (single ended) with integrated Subdividing Electronics Square-wave signals (differential) via Line Driver RS 422 Standard with integrated Subdividing Electronics Power supply: +5 V ±5 %, < 150 ma (without interpolation, unloaded) < 200 ma (with interpolation, unloaded) RoHS-conformity: The Linear Encoders of the MSA 350 series comply with the guideline of the RoHS-directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment 14

15 DIMENSIONS - TOLERANCES - MOUNTING POSSIBILITIES 15

16 MSA 352 SERIES - TECHNICAL DATA Features: Max. measuring length: 3040 mm Rigid mounting; large cross-section Mounting holes on the extrusion ends Reference marks Additional mounting support for longer measuring lengths MSA 352 is equipped with an additional set of sealing lips; the other features are identical with MSA 350 Optional: the MSA 352 is available with air inlets on extrusion ends. In addition to the two sets of sealing lips, low pressure air helps to keep out coolants and contamination. The RSF air pressure unit DA 400 is designed to clean and regulate the encoder air. Scale model System resolution [µm] Accuracy grades [µm/m] Grating pitch [µm] Integrated interpolation Max. velocity [m/s] continuous momentary Square-wave signals with integrated Subdiving Electronics MSA ±10 40 times MSA ±5, ±10 20 times MSA ±5, ±10 40 times MSA ±5, ±10 20 times MSA ,5 ±5, ±10 20 times Other accuracy grades or grating pitches (e. g. Inch) on request Standard measuring lengths [mm]: 170, 220, 270, 320, 370, 420, 470, 520, 620, 670, 720, 770, 820, 920, 1040, 1140, 1240, 1340, 1440, 1540, 1640, 1740, 1840, 2040, 2240, 2440, 2640, 2840, 3040 Scale unit: Glass scale (α 8.5 x 10 6 /K) Location of the reference marks: - Distance-coded reference marks: after travelling max. 20 mm the absolute position is available - Up to measuring length 920 mm: one reference mark in the middle of the measuring length or 35 mm from both ends of measuring length; measuring length 1040 mm and longer: 45 mm from both ends of measuring length - Optional: one reference mark at any location; additional reference marks by distances of n x 50 mm Required moving force: Two sets of sealing lips: < 6 N Environmental sealing acc. EN 60529: - With two sets of sealing lips: IP 54 - With DA 400: IP 64 Permissible temperature 20 C to +70 C (storage) 0 C to +50 C (operation) Weight (approx.): 3 kg/m (scale spar) kg (reading head with 3 m cable) Signal output (optional) Square-wave signals (single ended) with integrated Subdividing Electronics Square-wave signals (differential) via Line Driver RS 422 Standard with integrated Subdividing Electronics Power supply: +5 V ±5 %, < 150 ma (without interpolation, unloaded) < 200 ma (with interpolation, unloaded) RoHS-conformity: The Linear Encoders of the MSA 352 series comply with the guideline of the RoHS-directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment 16

17 DIMENSIONS - TOLERANCES - MOUNTING POSSIBILITIES 17

18 PRODUCT DIRECTORY MS 2x Series Reflective scanning Linear Encoder with integrated mounting control (only MS 25, MS 26) Easy mounting; no test box or oscilloscope needed Quality of the scanning signals is directly visible at the reading head via a 3-coloured LED Two independent switch signals for individual special functions Position of reference mark selectable High insensitivity against contamination High traversing speed Integrated subdividing: up to times 100 interpolation Max. measuring length Glass scale: 3140 mm Steel tape scale: mm MS 30, MS 31 Series Reflective scanning Linear Encoder Two independent switch signals for individual special functions Position of reference mark selectable Small dimensions Easy mounting as a result of large mounting tolerances High traversing speed High insensitivity against contamination Integrated subdividing: up to times 100 interpolation Max. measuring length Glass scale: 3140 mm Steel tape scale: mm MS 45 Series Reflective scanning Linear Encoder with integrated mounting control Easy mounting; no test box or oscilloscope needed Quality of the scanning signals is directly visible at the reading head via a 3-coloured LED Small dimensions Easy mounting as a result of large mounting tolerances High insensitivity against contamination High traversing speed Integrated subdividing: up to times 100 interpolation Max. measuring length Steel tape scale: mm MS 82 Series Interferential Linear Encoder Two switch tracks for individual special functions Non-contact reflective scanning High traversing speed Small dimensions Scale unit: glass scale or ROBAX glass cramic scale with phasse grating Max. measuring length Glass scale: 3140 mm Glass ceramic: 1540 mm MS 14 Series Reflective scanning Linear Encoder with integrated mounting Easy mounting; no test box or oscilloscope needed Quality of the scanning signals is directly visible at the reading head via a 3-coloured LED Extremely small dimensions Easy mounting as a result of large mounting tolerances High insensitivity against contamination High traversing speed Integrated subdividing: up to times 100 interpolation Max. measuring length Steel tape scale: mm MSR 40 Modular Rotary Encoder with steel tape scale Different versions Full-circle or segment version Grating pitch: 200 µm Accuracy of the grating (stretched): ±30 µm/m High rotational speed resp. circumferential speed Integrated subdividing: up to times 100 interpolation MSR 20 Segment version Grating pitch: 40 µm Accuracy of the grating (stretched): ±15 µm/m High circumferential speed Integrated subdividing: up to times 100 interpolation DG 118, DG 120 Rotary Encoder for universal application Standard line/rev.: graduated from 100 to 5400 DIT 10, DIT 30, DIT 48 Precision Measuring Probes For universal applications Stroke length: 10, 30, 48 mm Mounting on shaft sleeve Mounting with two tapped holes on body (DIT 30, DIT 48) With cable lifter Integrated pneumatic lifter optional Sealing bellows optional (DIT 30, DIT 48) 18

19 E. g.: MSA 470 E..g.: MSA 730 MSA 170 Series Sealed version Guided by ball bearings Distance-coded reference marks Mounting holes on the extrusion ends Max. measuring length: 520 mm MSA 7xx, MSA 8xx Series (small dimensions) MSA 4xx, MSA 5xx Series (large dimensions) Optimized thermal behavior Connection cable pluggable (optional) Sealed version Distance-coded reference marks Mounting holes at the ends or along the scale unit for improved vibration stability Max. measuring length: 3040 mm MSA 374 Series With integrated guide rail system For application on presses bending machines and hydraulic cylinders Sealed version Roller bearing dual guided scanning carriage Free positionable switching magnets for special functions Distance-coded reference marks Mounting holes on the extrusion ends Max. measuring length: 720 mm UFC 430 USB-Interface-Module USB-interface acc. to spec. 2.0 Available inputs: 1 Vpp max. 200 khz or TTL (RS 422) max. 500 khz Interpolation: up to times 400 for measuring systems with output 1 Vpp and up to times 4 for measuring systems with square-wave Line Driver signals Three 15-pin Sub-D female connectors for 3 encoder inputs 32 Bit counter with preset and latch register IFC 430R Encoder-interface-card PC interface board for quadrature encoder signal evaluation: times 1, -2 or -4 Latch logic for measured values Three counter channels à 32 bit, one load and two latch registers for each channel PC bus Signal edge separation: up to 100 ns Demo program with examples and driver software Precision Graduations Length graduations on glass, chromium coated Length graduations on steel tape, gold coated or polished surface Circular graduations on glass, chromium coated Graticules Antireflex coatings Coatings Cable Systems Individual cable design Hybrid cable Trailing cable System solutions Function control 19

20

Reliable. Sophisticated. Flexible. PRODUCT DIRECTORY. Linear Encoders, Digital Readouts, Rotary Encoders, Probes, Cable Systems, Precision Graduations

Reliable. Sophisticated. Flexible. PRODUCT DIRECTORY. Linear Encoders, Digital Readouts, Rotary Encoders, Probes, Cable Systems, Precision Graduations Reliable. Sophisticated. Flexible. PRODUCT DIRECTORY Linear Encoders, Digital Readouts, Rotary Encoders, Probes, Cable Systems, Precision Graduations RSF Elektronik, Corporate Head Quarters Tarsdorf, Austria

More information

MS 45 Series. Exposed Linear Encoders with Singlefield Scanning

MS 45 Series. Exposed Linear Encoders with Singlefield Scanning MS 45 Series Exposed Linear Encoders with Singlefield Scanning CONTENTS Description of Operating Principles / Design Advantages... 03 Technical Data... 08 Scanning Principles... 04 MS 45 MO/MK Dimensions,

More information

Digital Readouts. Linear Encoders For Manually Operated Machine Tools

Digital Readouts. Linear Encoders For Manually Operated Machine Tools Digital Readouts Linear Encoders For Manually Operated Machine Tools September 2012 Digital readouts from HEIDANHAIN are used in a wide variety of applications. These include machine tools, infeed axes

More information

PRODUCT DIRECTORY Linear Encoders Rotary Encoders Probes Digital Readouts Cable Systems Precision Graduations

PRODUCT DIRECTORY Linear Encoders Rotary Encoders Probes Digital Readouts Cable Systems Precision Graduations PRODUCT DIRECTORY Linear Encoders Rotary Encoders Probes Digital Readouts Cable Systems Precision Graduations RSF Elektronik, Corporate Head Quarters Tarsdorf, Austria RSF Elektronik, Manufacturing Subsidiary

More information

Position Display Units. Linear Encoders for Manually Operated Machine Tools

Position Display Units. Linear Encoders for Manually Operated Machine Tools Position Display Units Linear Encoders for Manually Operated Machine Tools September 2008 Digital readouts from HEIDENHAIN are used in a wide variety of applications. These include machine tools, infeed

More information

MSR 20, MSR 40. Modular Rotary Encoder with Singlefield Scanning

MSR 20, MSR 40. Modular Rotary Encoder with Singlefield Scanning MSR 20, MSR 40 Modular Rotary Encoder with Singlefield Scanning CONTENTS Description of Operating Principles/ Design Advantages... 03 Scanning Priciple, Shielding, Pin Assignment... 04 PG and PS: Electronic

More information

Reliable. Sophisticated. Flexible. Open Linear Encoders with with Singlefield Scanning

Reliable. Sophisticated. Flexible. Open Linear Encoders with with Singlefield Scanning Reliable. Sophisticated. Flexible. MS MS 3x 3x Series Open Linear Encoders with with Singlefield Scanning Contents Description of Operating Principles / 03 Design Advantages Scanning Principle 04 Shielding,

More information

MS 2x Series. Exposed Linear Encoders with Singlefield Scanning

MS 2x Series. Exposed Linear Encoders with Singlefield Scanning MS 2x Series Exposed Linear Encoders with Singlefield Scanning CONTENTS Description of Operating Principles/ Design Advantages... 03 Scanning Priciple, Shielding, Pin Assignment... 04 Output Signals...

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft

More information

ENC - LKE51 - L I B

ENC - LKE51 - L I B ENC-LKE51 Linear Magnetic Encoder FEATURES DESCRIPTION LKE51 ORDERING INFORMATION Resolutions: 5, 10, 25, and 50μm Linear Travel Speed: Up to 16m/s Standard Sensor for Linear and Rotary Axis Gap Clearance

More information

MAGNETIC TAPE. Series MB. incremental scale. Key-Features:

MAGNETIC TAPE. Series MB. incremental scale. Key-Features: MAGNETIC TAPE incremental scale Series MB Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...3 Installation Instruction...3 Digital Displays...4 Order Code...5 - Available

More information

Three Axis Digital Readout System

Three Axis Digital Readout System NEWALL MEASUREMENT SYSTEMS C80 Three Axis Digital Readout System CONTENTS 2 SPECIFICATIONS 3 CONNECTIONS 4 MOUNTING 4 Arm Mounting (Non-adjustable) 4 Arm Mounting (Adjustable) 5 Face Mounting (Adjustable)

More information

Product Information. LS 1679 Incremental Linear Encoder with Integrated Roller Guide

Product Information. LS 1679 Incremental Linear Encoder with Integrated Roller Guide Product Information LS 1679 Incremental Linear Encoder with Integrated Roller Guide February 2007 LS 1679 Incremental linear encoder for measuring steps to 5 µm or 1 µm Integrated wear-free roller guide

More information

03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through

03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through Feed-through Feed-through FEED-THROUGH Series Size Page Rotary Feed-through for Robots DDF 202 DDF 031 206 DDF 040 208 DDF 040-1 210 DDF 050 212 DDF 050-1 214 DDF 063 216 DDF 080 218 DDF 080-1 220 DDF

More information

Index. Index. 1.0 Introduction...2 This Manual Operation Finger Lift Cable Lift Pneumatic Operation...

Index. Index. 1.0 Introduction...2 This Manual Operation Finger Lift Cable Lift Pneumatic Operation... Li nearenc oder s wi t httlout put Us ermanual Index 1.0 Introduction..........................2 This Manual...........................2 2.0 Safety Summary......................3 Terms in this Manual....................3

More information

Digital Readout Systems

Digital Readout Systems Digital Readout Systems Magnescale Tel: +49 711 5858-777 E-Mail: smse-mp@eu.sony.com www.sonymanufacturing.com Reliable measuring systems higher quality and increased profit Sony magnetic scales fulfil

More information

Sealed Linear Encoders with Single-Field Scanning

Sealed Linear Encoders with Single-Field Scanning Linear Encoders Angle Encoders Sealed Linear Encoders with Single-Field Scanning Rotary Encoders 3-D Touch Probes Digital Readouts Controls HEIDENHAIN linear encoders are used as position measuring systems

More information

MAGNESCALE. digital magnetic scale. Series GB-ER. Key-Features:

MAGNESCALE. digital magnetic scale. Series GB-ER. Key-Features: MAGNESCALE digital magnetic scale Series GB-ER Key-Features: Content: Technical Data Technical Drawing Displays Order Code...2...2...4...5 - available measurement ranges: 50 to 2200 mm - Resolution up

More information

Magnetic Sensor - Incremental EHP

Magnetic Sensor - Incremental EHP small design: 12 x 13 x 35 mm stainless steel case resolution up to 0,5 μm; hysteresis ± 1μm pole pitch:1; 2 mm output signal: Digital (TTL-RS422) or analog (1 Vpp) direct connection to control / display

More information

HOT LINKS Trade Show Schedule ISO Certification Contact

HOT LINKS Trade Show Schedule ISO Certification Contact July 2012 HOT LINKS Trade Show Schedule ISO Certification Contact Single-Field Scanning - Reduced Sensitivity To Contamination, Higher Quality PRODUCT SPOTLIGHT The type of scanning in harsh operating

More information

Up to 85% higher Service Life due to efficient sealing method.

Up to 85% higher Service Life due to efficient sealing method. Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348

More information

DIRECT DRIVE ROTARY TABLES SRT SERIES

DIRECT DRIVE ROTARY TABLES SRT SERIES DIRECT DRIVE ROTARY TABLES SRT SERIES Key features: Direct drive Large center aperture Brushless motor design Precision bearing system Integrated position feedback Built-in thermal sensors ServoRing rotary

More information

Electric Rotary Modules. Rotary Actuators

Electric Rotary Modules. Rotary Actuators Electric Rotary Modules Rotary Actuators Electric Rotary Modules Rotary Actuators ROTARY ACTUATORS Series Size Page Miniature Rotary Actuators MRD-S 224 MRD-S 4 232 MRD-S 8 234 MRD-S 12 236 Explanation

More information

Product Information. EIB 700 Series External Interface Box

Product Information. EIB 700 Series External Interface Box Product Information EIB 700 Series External Interface Box June 2013 EIB 700 Series The EIB 700 units are external interface boxes for precise position measurement. They are ideal for inspection stations

More information

Gurley Models LA18, LA20, LA25, High Resolution - Industrial Ruggedness

Gurley Models LA18, LA20, LA25, High Resolution - Industrial Ruggedness Gurley Models LA18, LA20, LA25, and LA35 Absolute Linear Encoders Motion Type: Linear Usage Grade: Industrial Output: absolute Max Resolution: 0.5 to 8µm High Resolution - Industrial Ruggedness ingenuity@work

More information

DDF-SE. Application example. Feed-through Stationary Rotary Feed-through. Max. speed 500 revs/ min. Air feed-through Up to 6x

DDF-SE. Application example. Feed-through Stationary Rotary Feed-through.  Max. speed 500 revs/ min. Air feed-through Up to 6x DDF-SE www.comoso.com Sizes 080.. 120 Max. speed 500 revs/ min Air feed-through Up to 6x Electrical feed-throughs Up to 8x Application example Turning a component for laser welding or centrifugal drying

More information

MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT)

MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT) MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT) TECHNICAL DATA Measurement taken Position read sampling time (typical) Shock test DIN IEC68T2-27 Vibrations DIN

More information

Linear encoders without bearings incremental System for linear motion feedback

Linear encoders without bearings incremental System for linear motion feedback Features Robust magnetic sensing method Output signals A 90 B with index signal Output circuits: HTL/push-pull and TTL/RS422 Resolution up to 5 µm (4-times evaluation) Non-contact, wear-free sensing system

More information

RK-2 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD. Main characteristics

RK-2 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD. Main characteristics RK-2 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD (ANALOG OR START/STOP OUTPUT) Main characteristics Absolute transducer Strokes from 50 to 4000mm (RK-2- -N/E/S) Digital output

More information

GSK988T TURNING CENTER CNC SYSTEM

GSK988T TURNING CENTER CNC SYSTEM GSK988T TURNING CENTER CNC SYSTEM GSK988T is a new CNC controller for slant bed CNC lathe and turning center, adopt micro processor of 400MHz high performance, and it can control five feeding axes (including

More information

IMPAC Infrared Thermometers

IMPAC Infrared Thermometers IMPAC Infrared Thermometers focusable optics for non-contact temperature measurements on metals, ceramics, graphite etc. between 300 and 3300 C IS 140 IGA 140 IS 140-PB IGA 140-PB Short response times

More information

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features: ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental

More information

1000TII TURNING CNC CONTROLLER

1000TII TURNING CNC CONTROLLER 1000TII TURNING CNC CONTROLLER 1000TII from CNCmakers Limited, is a superior turning machine CNC system with high performance 32-bit microprocessor, new structure design and open PLC process. It is employed

More information

IS 140 IGA 140 IS 140-PB IGA 140-PB IS 140-PN IGA 140-PN IS 140-ET IGA 140-ET

IS 140 IGA 140 IS 140-PB IGA 140-PB IS 140-PN IGA 140-PN IS 140-ET IGA 140-ET IMPAC Infrared Temperature Sensors focusable optics for non-contact temperature measurements on metals, ceramics, graphite etc. between 220 and 3500 C IS 140 IGA 140 IS 140-PB IGA 140-PB IS 140-PN IGA

More information

Label Applicator HERMA 400

Label Applicator HERMA 400 Label Applicator HERMA 400 Info GB V6.0 / 30.3.07 [ Facts & Data ] R Constructional variant Right-hand or left-hand version, always flexible to use L Power supply / Line voltage Max. power consumption

More information

RESOLUTE absolute optical encoder with Panasonic serial communications

RESOLUTE absolute optical encoder with Panasonic serial communications L-9517-9460-07-A RESOLUTE absolute optical encoder with Panasonic serial communications True absolute non-contact optical encoder system: no batteries required Wide set-up tolerances for quick and easy

More information

Absolute encoders multiturn

Absolute encoders multiturn The Sendix multiturn encoders 5868 and 5888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a maximum resolution

More information

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing

More information

In-process inspection: Inspector technology and concept

In-process inspection: Inspector technology and concept Inspector In-process inspection: Inspector technology and concept Need to inspect a part during production or the final result? The Inspector system provides a quick and efficient method to interface a

More information

Rexroth IndraDrive Fc Compact, high-performance standard frequency converters

Rexroth IndraDrive Fc Compact, high-performance standard frequency converters Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Rexroth IndraDrive Fc Compact, high-performance standard frequency converters Simply a better drive 2

More information

Linear Probe Encoder Page 1 of 7. Description. Features

Linear Probe Encoder Page 1 of 7. Description. Features Page 1 of 7 Description The PE series linear plunger-style optical encoder has a machined aluminum enclosure. The PE provides either single-ended or differential quadrature encoder output in a convenient

More information

LVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD Hydraulic Series. Key-Features:

LVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD Hydraulic Series. Key-Features: HM 1808 LVDT Inductive Position Transducer - Hydraulic Series SM-HYD Hydraulic Series Key-Features: Content: - Screw flange M18x1,5 / M30x1,5 or plug-in flange Ø18 - Pressure up to 400 bar - Measurement

More information

Scanning System S-2100

Scanning System S-2100 2D laser measurement system The fastest 2D laser measurement system in the world 119 m range Scan rate >1 million points/sec 360 vertical field of view System description The PENTAX Scanning System S-2100

More information

SMT Encoder for High Performance, High Volume Designs Small Size High Resolution Low Cost ChipEncoder Reflective Surface Mount Encoder Features

SMT Encoder for High Performance, High Volume Designs Small Size High Resolution Low Cost ChipEncoder Reflective Surface Mount Encoder Features SMT Encoder for High Performance, High Volume Designs Small Size 7.0mm (W) x 11.0mm (L) x 3.1mm (H) High Resolution Linear: 10μm or 1μm per quadrature count Rotary: 3,300 to 327,000 quadrature counts per

More information

Multifunction devices

Multifunction devices devices devices devices, electronic Type Page LED multifunction displays pulse, frequency, time (DC) Codix 524 240 pulse, frequency, time (AC+DC) Codix 544 243 LCD multifunction preset counters 1 or 2

More information

Rexroth IndraDrive Fc Compact, high-performance standard frequency converters

Rexroth IndraDrive Fc Compact, high-performance standard frequency converters Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Rexroth IndraDrive Fc Compact, high-performance standard frequency converters Simply a better drive 2

More information

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features Description Page 1 of 8 The EM1 is a transmissive optical encoder module. This module is designed to detect rotary or linear position when used together with a codewheel or linear strip. The EM1 consists

More information

TECHNICAL DATASHEET Absolute Encoder AC 58 - SSI-P

TECHNICAL DATASHEET Absolute Encoder AC 58 - SSI-P n n n n n Compact design: 59 mm mounting depth for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response Parameterization: Resolution, code type, direction,

More information

GB-ER series. Direct connection to LH70/71 series

GB-ER series. Direct connection to LH70/71 series GB-ER series Direct connection to LH70/71 series 21/12/2007 Product comparison GB-A series Cable length : 3m, 5m, 10m Waterproof connector CH01 Multi-gap head PM output Up/Down output GB-ER series Cable

More information

OPTICAL SCALES MAGNETIC SCALES ROTARY ENCODERS DIGITAL READOUTS POSITION CONTROLLERS

OPTICAL SCALES MAGNETIC SCALES ROTARY ENCODERS DIGITAL READOUTS POSITION CONTROLLERS General catalogue OPTICAL SCALES MAGNETIC SCALES ROTARY ENCODERS DIGITAL READOUTS POSITION CONTROLLERS M e a s u r i n g a n d c o n t r o l s y s t e m s Index Optical scales 4 ISA 2320 SCR 3923 PBS-HR

More information

SPECTRO Series SPECTRO-3-50-UV-JR. Aufbau. SPECTRO-3 Series True Color Sensors. Product name: SPECTRO-3-50-UV-JR (incl. software SPECTRO3-Scope)

SPECTRO Series SPECTRO-3-50-UV-JR. Aufbau. SPECTRO-3 Series True Color Sensors. Product name: SPECTRO-3-50-UV-JR (incl. software SPECTRO3-Scope) SPECTRO Series - Measuring range typ. 15 mm... 100 mm - Up to 31 colors can be stored - RS232 interface (USB adapter is available) - 8x UV LED, 382 nm, focused (AC-/DC-/PULSEoperation or OFF for luminous

More information

MICROMASTER Encoder Module

MICROMASTER Encoder Module MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified

More information

ZU 251. Incremental Counter Module With Analogue Output and Serial Interface. Operating Instructions. control motion interface

ZU 251. Incremental Counter Module With Analogue Output and Serial Interface. Operating Instructions. control motion interface control motion interface motrona GmbH Zwischen den Wegen 32 78239 Rielasingen - Germany Tel. +49 (0)7731-9332-0 Fax +49 (0)7731-9332-30 info@motrona.com www.motrona.com ZU 251 Incremental Counter Module

More information

IMPAC Infrared Thermometers

IMPAC Infrared Thermometers IMPAC Infrared Thermometers Small, stationary infrared thermometers in 2-wire technique for non-contact temperature measurement of non-metallic surfaces between -20 C and 600 C IN 300 Very small housing

More information

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features: ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental

More information

Advanced Test Equipment Rentals ATEC (2832)

Advanced Test Equipment Rentals ATEC (2832) Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Uncompromising Accuracy Z-Mike non-contact gauges deliver precise, dimensional measurements for improved product quality

More information

Speed sensor MiniCoder GEL 2471

Speed sensor MiniCoder GEL 2471 Speed sensor MiniCoder GEL 2471 for electrically conducting toothed-wheels Technical information version 10.02 The MiniCoder family from Lenord + Bauer offers spacesaving solutions for the contactless

More information

Optical ENCODERS for LINEAR and ROTARY Applications PRODUCT RANGE SIMPLY PRECISE

Optical ENCODERS for LINEAR and ROTARY Applications  PRODUCT RANGE SIMPLY PRECISE Optical ENCODERS for LINEAR and ROTARY Applications WWW.NUMERIKJENA.DE 2016 PRODUCT RANGE SIMPLY PRECISE NOTES 2 3 Index 1. Company 4 2. Product Overview 6 2.1 Complete Product Range 6 2.2 Technical Comparison

More information

Preface 11 Key Concept 1: Know your machine from a programmer s viewpoint 17

Preface 11 Key Concept 1: Know your machine from a programmer s viewpoint 17 Table of contents Preface 11 Prerequisites 11 Basic machining practice experience 11 Math 12 Motivation 12 Controls covered 12 What about conversational controls? 13 Controls other than Fanuc 13 Limitations

More information

SPECTRO Series SPECTRO-3-30-UV-ANA. Design. SPECTRO-3 Series True Color Sensors. Product name:

SPECTRO Series SPECTRO-3-30-UV-ANA. Design. SPECTRO-3 Series True Color Sensors. Product name: SPECTRO Series SPECTRO-3-30-UV-ANA - Measuring range typ. 15 mm... 80 mm - Transmitter power of UV LED can be adjusted for excitation of luminescent marks - Up to 3 colors (or color groups) can be stored

More information

MTI-2100 FOTONIC SENSOR. High resolution, non-contact. measurement of vibration. and displacement

MTI-2100 FOTONIC SENSOR. High resolution, non-contact. measurement of vibration. and displacement A worldwide leader in precision measurement solutions MTI-2100 FOTONIC SENSOR High resolution, non-contact measurement of vibration and displacement MTI-2100 Fotonic TM Sensor Unmatched Resolution and

More information

.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.

.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71. Optical SERIES 61K High Resolution, 4-Pin FEATURES 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available Sealed Version Available Rugged Construction Cable or Pin Versions 10 Million Rotational

More information

DT9834 Series High-Performance Multifunction USB Data Acquisition Modules

DT9834 Series High-Performance Multifunction USB Data Acquisition Modules DT9834 Series High-Performance Multifunction USB Data Acquisition Modules DT9834 Series High Performance, Multifunction USB DAQ Key Features: Simultaneous subsystem operation on up to 32 analog input channels,

More information

THE NEW LASER FAMILY FOR FINE WELDING FROM FIBER LASERS TO PULSED YAG LASERS

THE NEW LASER FAMILY FOR FINE WELDING FROM FIBER LASERS TO PULSED YAG LASERS FOCUS ON FINE SOLUTIONS THE NEW LASER FAMILY FOR FINE WELDING FROM FIBER LASERS TO PULSED YAG LASERS Welding lasers from ROFIN ROFIN s laser sources for welding satisfy all criteria for the optimized laser

More information

UDC100 Universal Digital Controller. Specification. Overview. Features. Features, continued /99 Page 1 of 4

UDC100 Universal Digital Controller. Specification. Overview. Features. Features, continued /99 Page 1 of 4 UDC100 Universal Digital Controller 51-52-03-29 11/99 Page 1 of 4 Specification Overview The UDC100 Universal Digital Controller is a microprocessor-based 1/4 DIN low cost temperature controller. It combines

More information

Figure 1: Standard 906 Sensor and Pulser Disc. Figure 2: Standard 906 Sensor and Pulser Wrap

Figure 1: Standard 906 Sensor and Pulser Disc. Figure 2: Standard 906 Sensor and Pulser Wrap Description: The TR5000 is a Full Logic Control Process ratemeter that can display up to three separate values of rate and compare them to programmable set points. Rates A & B can be programmed by the

More information

The full range of performance

The full range of performance sensors sensors P sensors PS series series The full range of performance The sensors of this series cover all important pressure ranges from -1 +600 bar with an accuracy of 0.5% f.s.. Bar, psi and further

More information

LAUREL. Laureate Digital Panel Meter for Load Cell & Microvolt Input ELECTRONICS, INC. Features. Description

LAUREL. Laureate Digital Panel Meter for Load Cell & Microvolt Input ELECTRONICS, INC. Features. Description Description LAUREL ELECTRONICS, INC. Features Laureate Digital Panel Meter for Load Cell & Microvolt Input 20, 50, 100, 250 & 500 mv ranges Span adjust from 0 to ±99,999, zero adjust from -99,999 to +99,999

More information

Considerations for Specifying, Installing and Interfacing Rotary Incremental Optical Encoders

Considerations for Specifying, Installing and Interfacing Rotary Incremental Optical Encoders Considerations for Specifying, Installing and Interfacing Rotary Incremental Optical Encoders Scott Hewitt, President SICK STEGMANN, INC. Dayton, OH www.stegmann.com sales@stegmann.com 800-811-9110 The

More information

LAUREL ELECTRONICS, INC.

LAUREL ELECTRONICS, INC. LAUREL ELECTRONICS, INC. Laureate Digital Panel Meter for Process, Strain & Potentiometer Follower Signals Features Selectable ±0.2, ±2, ±20, ±200, ±300 & ±600 Vdc voltage ranges Selectable ±2, ±20, ±200

More information

High Resolution Multicolor Contrast Scanner. Dimensioned drawing

High Resolution Multicolor Contrast Scanner. Dimensioned drawing Specifications and description KRTM 20 High Resolution Multicolor Contrast Scanner Dimensioned drawing en 01-2011/06 50116669 12mm 20mm 50mm 12-30 V DC 50 / 25 khz We reserve the right to make changes

More information

SPECTRO Series SPECTRO-3-30-UV. Design. SPECTRO-3 Series True Color Sensors. Product name: Accessories: (p. 9-10)

SPECTRO Series SPECTRO-3-30-UV. Design. SPECTRO-3 Series True Color Sensors. Product name: Accessories: (p. 9-10) SPECTRO Series SPECTRO-3-30-UV - Measuring range typ. 15 mm... 80 mm - Ideal adjustment to luminescent objects - Up to 31 colors can be stored - RS232 interface (USB or Ethernet adapter is available) -

More information

Transmitter optics with 9x white light LED (optics cover made of glass)

Transmitter optics with 9x white light LED (optics cover made of glass) SPECTRO Series SPECTRO-3-85-FCL-30 /30 - Recommended measuring distance: typ. 50 mm ± 5 mm - Big dynamic range due to focused white-light operation - Up to 31 colors can be stored - RS232 interface (USB

More information

SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR

SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR Description SE22HR is a very high performance hollow shaft encoder; a high resolution is achievable in a small space with a good performance/price

More information

POSIWIRE. WS61 with internal magnetic encoder Position Sensor. Cable Extension Position Sensors. Datasheet

POSIWIRE. WS61 with internal magnetic encoder Position Sensor. Cable Extension Position Sensors. Datasheet Cable Extension Position Sensors with internal magnetic encoder Position Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does

More information

FLAT DISPLAY TECHNOLOGY

FLAT DISPLAY TECHNOLOGY 15.0 Open Frame Monitor Model Number: LOF1506xx This product is RoHS compliant SPEC No.: SAS-1008002 Version: 0.0 Issue Date: September 6, 2010 1. Introduction: 1.1 About the Product The LOF1506xx 15.0

More information

User's Manual ND 281 NDP 281. Measured value display 5/97

User's Manual ND 281 NDP 281. Measured value display 5/97 User's Manual ND 81 NDP 81 Measured value display /97 Display of actual value and input (7-segment LED, 9 decades with algebraic sign) Numeric keypad with decimal point 7 8 9 6 REF 1 SET START PRINT in.

More information

Flexible. Fast. Precise. PPU-E Pick & Place Unit

Flexible. Fast. Precise. PPU-E Pick & Place Unit PPU-E Flexible. Fast. Precise. PPU-E Pick & Place Unit Compact 2-axis unit for a faster, flexible running of any curve on one plane. Field of Application For use in clean and slightly polluted environment.

More information

EM1. Transmissive Optical Encoder Module Page 1 of 9. Description. Features

EM1. Transmissive Optical Encoder Module Page 1 of 9. Description. Features Description Page 1 of 9 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear

More information

What is a Fagor Turnkey Package?

What is a Fagor Turnkey Package? What is a Fagor Turnkey Package? A Turnkey Package is a pre-engineered CNC-Servo System. The CNC is integrated into a functional machine tool pendant and the Servo System is engineered into an electrical

More information

I/A Series Hardware Fiber Optic LAN Converter

I/A Series Hardware Fiber Optic LAN Converter I/A Series Hardware PSS 21H-7F3 B4 The provides bidirectional conversion between coaxial and fiber optic media. The converter is compatible with existing I/A Series system hardware, utilizes industry standard

More information

Technical data. General specifications. Indicators/operating means

Technical data. General specifications. Indicators/operating means Model Number Single head system Features Sensor head bidirectional and rotatable Function indicators visible from all directions Quick mounting bracket Selectable sound lobe width Programmable Diagrams

More information

Nikon s DigiMicro Position Encoders Nanometer Resolution with Sub-Micron Accuracy

Nikon s DigiMicro Position Encoders Nanometer Resolution with Sub-Micron Accuracy Nikon s DigiMicro Position Encoders Nanometer Resolution with Sub-Micron Accuracy Available in North America through NanoWave, Inc. The DigiMicro product line from Nikon is a family of optically-based

More information

All Control Electronics, No Electronics. And Host System Connections M06 Industrial-Grade Fiber Optic Cabling (Recommended)

All Control Electronics, No Electronics. And Host System Connections M06 Industrial-Grade Fiber Optic Cabling (Recommended) MR314 ZapFree Hollow Shaft FIBER OPTIC ROTARY ENCODER MICRONOR automation components Products The MR314 ZapFree High Resolution (1024ppr) Hollow Shaft Rotary Encoder is an entirely passive, intrinsically

More information

Microincrements IP67-related solutions

Microincrements IP67-related solutions technology microincrements Keywords microincrements Distributed Clocks EtherCAT EtherCAT Box IP 67 EP50 encoder Microincrements IP67-related solutions This application example describes how an EP50 EtherCAT

More information

Innovative Rotary Encoders Deliver Durability and Precision without Tradeoffs. By: Jeff Smoot, CUI Inc

Innovative Rotary Encoders Deliver Durability and Precision without Tradeoffs. By: Jeff Smoot, CUI Inc Innovative Rotary Encoders Deliver Durability and Precision without Tradeoffs By: Jeff Smoot, CUI Inc Rotary encoders provide critical information about the position of motor shafts and thus also their

More information

E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm

E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.

More information

Operating Instructions

Operating Instructions CNTX Contrast sensor Operating Instructions CAUTIONS AND WARNINGS SET-UP DISTANCE ADJUSTMENT: As a general rule, the sensor should be fixed at a 15 to 20 angle from directly perpendicular to the target

More information

FP-QUAD-510. Features. Power Requirement OPERATING INSTRUCTIONS. 4-Axis, Quadrature Input Module

FP-QUAD-510. Features. Power Requirement OPERATING INSTRUCTIONS. 4-Axis, Quadrature Input Module OPERATING INSTRUCTIONS FP-QUAD-510 4-Axis, Quadrature Input Module These operating instructions describe the installation, features, and characteristics of the FP-QUAD-510. For details on configuring and

More information

Product Information. LIC 4113 LIC 4193 Absolute Exposed Linear Encoders

Product Information. LIC 4113 LIC 4193 Absolute Exposed Linear Encoders Product Information LIC 4113 LIC 4193 Absolute Exposed Linear Encoders November 2016 LIC 4113, LIC 4193 Absolute linear encoder for measuring lengths up to 3 m Measuring steps to 0.001 µm Measuring standard

More information

A COMPUTERIZED SYSTEM FOR THE ADVANCED INSPECTION OF REACTOR VESSEL STUDS AND NUTS BY COMBINED MULTI-FREQUENCY EDDY CURRENT AND ULTRASONIC TECHNIQUE

A COMPUTERIZED SYSTEM FOR THE ADVANCED INSPECTION OF REACTOR VESSEL STUDS AND NUTS BY COMBINED MULTI-FREQUENCY EDDY CURRENT AND ULTRASONIC TECHNIQUE More Info at Open Access Database www.ndt.net/?id=18566 A COMPUTERIZED SYSTEM FOR THE ADVANCED INSPECTION OF REACTOR VESSEL STUDS AND NUTS BY COMBINED MULTI-FREQUENCY EDDY CURRENT AND ULTRASONIC TECHNIQUE

More information

Application Note AN-708 Vibration Measurements with the Vibration Synchronization Module

Application Note AN-708 Vibration Measurements with the Vibration Synchronization Module Application Note AN-708 Vibration Measurements with the Vibration Synchronization Module Introduction The vibration module allows complete analysis of cyclical events using low-speed cameras. This is accomplished

More information

EAM PROFIBUS MULTITURN ABSOLUTE ENCODER PRESENTATION HARDWARE INSTALLATION DEVICE MULTITURN ABSOLUTE ENCODERS EAM PROFIBUS

EAM PROFIBUS MULTITURN ABSOLUTE ENCODER PRESENTATION HARDWARE INSTALLATION DEVICE MULTITURN ABSOLUTE ENCODERS EAM PROFIBUS EAM PROFIBUS MULTITURN ABSOLUTE ENCODER PRESENTATION The Eltra multiturn Pro bus encoder series (Identi cation Number 0x0599) is complying to the Pro bus DP standard as described on the European Standard

More information

Single Axis Position Controller

Single Axis Position Controller SERIES P9511 Single Axis Position Controller Compact Construction Simple Go-to operation Integrated Relay Output Integrated Mains Power Supply ELEKTRO-TRADING sp. Z o.o. 44-109 Gliwice, ul. Mechaników

More information

RLS Series RLS-GD-20/20 -UV. Design. RLS-GD Series Gloss Detection Sensors. Accessories: (cf. page 9) Product name:

RLS Series RLS-GD-20/20 -UV. Design. RLS-GD Series Gloss Detection Sensors. Accessories: (cf. page 9) Product name: RLS Series RLS-GD-20/20 -UV Detection of Glass Coating - Insensitive to outside light due to clocked UV illumination - Receiver (20 ) and reference - Storing of up to 31 gloss degrees (gloss values) -

More information

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment. Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous

More information

SPECTRO Series SPECTRO-3-20-COF. Design. SPECTRO-3 Series True Color Sensors. Product name: Accessories: (p. 9)

SPECTRO Series SPECTRO-3-20-COF. Design. SPECTRO-3 Series True Color Sensors. Product name: Accessories: (p. 9) SPECTRO Series SPECTRO-3-20-COF - Measuring range typ. 15 mm... 30 mm - Integrated transmitter and receiver optics (confocal) - Up to 31 colors can be stored - RS232 interface (USB or Ethernet adapter

More information

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing Description The electronic pressure switch is the successful combination of hygienic process connections with flush welded

More information

SPECTRO Series SPECTRO-3-50-FCL-JR. Design. SPECTRO-3 Series True Color Sensors. Product name: SPECTRO-3-50-FCL-JR (incl. software SPECTRO3-Scope)

SPECTRO Series SPECTRO-3-50-FCL-JR. Design. SPECTRO-3 Series True Color Sensors. Product name: SPECTRO-3-50-FCL-JR (incl. software SPECTRO3-Scope) SPECTRO Series - Measuring range typ. 10 mm... 150 mm - Big dynamic range due to focused white-light operation - Up to 31 colors can be stored - RS232 interface (USB or Ethernet adapter available) - 8x

More information

MultiMac. Eddy Current Instrument for Encircling Coil, Sector and Rotary Probe Testing of Tube, Bar, & Wire

MultiMac. Eddy Current Instrument for Encircling Coil, Sector and Rotary Probe Testing of Tube, Bar, & Wire MultiMac Eddy Current Instrument for Encircling Coil, Sector and Rotary Probe Testing of Tube, Bar, & Wire Inspection Features Versatile Threshold Selection Challenging test conditions are made simple

More information