Preset counters, electronic

Size: px

Start display at page:

Download "Preset counters, electronic"

Deirdre Collins
5 years ago
Views:

With its automatic help texts, clearly and legibly displayed on 14 LED segments, the Codix 560 preset counter takes the user effortlessly through the programming.

1 With its automatic help texts, clearly and legibly displayed on 14 LED segments, the Codix 560 preset counter takes the user effortlessly through the programming. The large user-friendly front keys can be operated even when wearing gloves. The 14 mm high LED display ensures easy reading even from a long distance and in poor lighting conditions. New: now available also with /485 interface and MODUS and protocol RoHS DC C V V Power supply DIN 96 x 48 Temperature range DIN front bezel Menu-driven programming t Hz IP65 65 khz t Hz HR High protection level High count frequency Multifunctional Frequency display with HR POSITION Position display LEDs 14 segment LED atch RS atch counter Total counter Optional interface Multifunctional Counter, tachometer, timer and position display in one device. Can be used as preset counter, batch counter or total counter. 2 relays (change-over). Many different count modes. Scalable display. Set value, step or tracking preset. Multi-range power supply for C or DC. Readable or configurable via /485 interface via MODUS or protocol. llows direct connection of a large display or printer. User-friendly utomatic help texts, displayed in German and English. 14-segment LED for improved text representation. Status display of the presets. 3 predefined parameters. Tracking presets eliminate the need for reprogramming of the pre-signal. Minimum installation depth. 4-stage RESET modes. 3-stage keypad locking. Suitable for installation in mosaic systems. Order code X a X b X c a Power supply 0 = V C, ±10 % 1) 3 = V DC 1) b Input trigger levels 0 = Standard level (HTL) 1) = V DC level c Interface (optional) 0 = None 5 = (MODUS or ) 7 = (MODUS or ) Delivery specification Preset counter Mounting clip Instruction manual ccessories Dimensions in mm [inch] Order no. Mounting frame with cut-out 92 x 45 [3.62 x 1.77] for snap-on mounting on 35 [1.38] top-hat DIN rail, for counters 96 x 48 [3.78 x 1.89] grey G Suitable gaskets as well as further accessories can be found in the accessories section or in the accessories area of our website at: 1) Stock types 134

2 Technical data General technical data Display Operating temperature Storage temperature 6-digit red 14 segment LED display, 14 mm [0.55] high -20 C C [-4 F F] (non-condensing) -25 C C [-13 F F] Relative humidity at +40 C [+104 F] RH 93 % (non-condensing) ltitude up to 2000 m [6562 ] Electrical characteristics Power supply C V C, ±10 % max. 11 V, 50/60 Hz DC V, max. 5.5 W External fuse protection 230 V C T V DC T 0.25 Data retention > 10 years, EEPROM Response time of the frequency meter 100 / 600 ms Input modes pulse counters count direction (cnt.dir), difference (up.dn), addition + (up.up), phase discriminator x1, x2, x4 (quad, quad x2, quad x4), ratio (/), ratio in % ((-)/ x100 %) frequency meter, -, + quad, /, (-)/ x 100 % timer 4 start modes: FrErun, uto, Inp.Inp., Inp.Inp. Sensor power supply C supply 24 V DC ±15 %, 80 m DC supply max. 80 m, external power supply is connected through EMC standards EN class, EN , EN Device safety designed to EN part 1 protection class 2 application area pollution level 2 UL approval file E Mechanical characteristics Protection Weight IP65 (from the front) approx. 180 g [6.35 oz] Inputs Count inputs Polarity of the inputs Input resistance and programmable for all inputs in common, NPN/PNP 5 kw Count frequency pulse counters max. 55 khz tachometers max. 65 khz can be damped to 30 Hz (mechanical contacts) Control / Reset input MPI 1 and MPI 2, Lock, Gate, Reset Min pulse duration of the inputs 10 ms /1 ms Switching levels HTL-level: LOW: V DC with C supply HIGH: V DC V DC: LOW: V DC HIGH: V DC Switching levels HTL-level: LOW: x U with DC supply HIGH: 0.6 x U V DC V DC: LOW: V DC HIGH: V DC Pulse shape Outputs Switching voltage Switching current Switching capacity variable, Schmitt-Trigger characteristics max. 250 V C / 150 V DC max. 3 C / DC min. 30 m DC max. 750 V / 90 W Output mech. service life (switching cycles) 2 x 10 7 N of switching cycles at 3 / 250 V C 5 x 10 4 N of switching cycles at 3 / 30 V DC 5 x 10 4 relay with changeover contact Reaction time of the outputs 13 ms (pulse / time) Optional interface MODUS and Count frequency max. 45 khz Interface, aud rate 9600 Device address , programmable Preset counters Terminal assignment Pin (optional) 22 GND 23 RXD 24 TXD Pin (optional) DO 24 DI Pin Signal and control inputs 1 INP (Signal input ) 2 INP (Signal input ) 3 RESET (Reset input) 4 LOCK (Keypad lock) 5 GTE (Gate input) 6 MPI 1 (User input 1) 7 MPI 2 (User input 2) 8 Sensor power supply C: 24 V DC/80 m DC: U connected through 9 Shared connection for signal and control inputs GND (0 VDC) Pin Version with relay/optocoupler 10 Relay contact C.2 11 Relay contact N.O.2 12 Relay contact N.C.2 13 Relay contact C.1 14 Relay contact N.O.1 15 Relay contact N.C.1 16 C: V C, ±10 %, N~ DC: V DC 17 C: V C, ±10 %, L~ DC: GND (0 V DC) Output 2 Output 1 Power supply Fritz Kübler GmbH, subject to errors and changes. 10/

3 Pulse counter Count with direction mode Difference mode Quadrature mode quad / quad2 / quad4 dd, Sub, automatic reset 2-input adding mode + Ratio measurement / Multi-range power supply for C or DC Percentage difference measurement (-)/ x 100 % atch counting Totalizer (Overall total) Multiplication and division factor (up to ) Set value Step or tracking preset pplication examples CountDir + dd Roller shutter door with automatic shut-off Quad + dd Running direction and position on milling machines, Limit switch monitoring UpDown + dd utomatic subtraction of faulty or reject parts from the total piece count CountDir + atch Logging of piece numbers and packing units plus control of replenishment of packing cartons UpUp + dd dding up of two parallel or staggered production lines Quad + dd tot Cut-to-length with overall total count and control of the machine 136

4 Frequency meter (tachometer) + / ( ) / x 100 % (percentage display) Quad (phase discriminator with recognition of direction) veraging Start delay 2nd tacho input Gate input Multiplication and division factor (up to ) pplication examples Synchro monitoring and control of two conveyor belts Quad Speed regulation with indication of direction Preset counters / Ratio measurement (-)/ [%] Ratio measurement, e.g. for speed alignment Time and hours-run meter (timer) FrErun (control via gate input) uto (start via reset, stop at preset) Inp.Inp (start with first edge at Inp., stop with second edge Inp.) Inp. Inp (start with Inp., stop with Inp.) Totalizer (overall total) atch counting Set value Step or tracking preset pplication examples Inp. Inp Interval measurement FrErun Measurement of overall time from switching on the conveyor belt till switching off Inp. Inp Run-time measurement uto Time-controlled production line Fritz Kübler GmbH, subject to errors and changes. 10/

5 / interface (optional) For connecting the counter to a PC, a PLC, a large display or a printer for reading-out data or configuring the device. 1 MODUS MODUS Dimensions Dimensions in mm [inch] 96 3,77 max.35 1,38 C 48 1, ,69 C 7,35 0, ,54 D 90,5 3,56 11,2 0,44 D E [ ] Panel cut-out E F [ ] This document is property of Fritz Kübler GmbH, use of this document without written permission is General prohibited. tolerances Das Urheberrecht an dieser Zeichnung verbleibt uns. Sie darf ohne unsere vorherige Zustimmung weder llgemeintol. vervielfältigt noch Dritten zugänglich gemacht oder DIN ISO auf andere Weise mißbraucht werden. Zuwiederhandlungen verpflichten zu Schadenersatz m-H Surface: Oberfläche: Date Scale: Material: Werkstoff: Maßstab: Type: 1:1 Typ: 56X Size: Title:/enennung: Format: 3 Name Codix al da da Drawn by earb. pprov. by Gepr Rev. St. 4 Z1364 Revision Rev. No./Änd. Nr. Date Name da Drawingnumber:/Zeichnungsnummer: Sheet/ latt 1 / 1 138

Preset counters, electronic

Preset counters, electronic The multifunction preset counters Codix 923 / 924 can be used universally. These preset pulse counters, tachometers or preset timers with up to 6 presets can solve a wide variety of control and monitoring