TALLYSMAN - PART NUMBER ORDERING GUIDE For all Embedded Antennas

Transcription

1 For all Embedded Antennas Assigned by Tallysman for custom tuned antennas 33-aaaa-xx-yyyy-zz 08 = H.FL (female)** (micro-coax cable) 09 = U.FL (micro-coax cable) For the TW2000 Family of s 33-2aaa-xx-yyyy 07 = SMA female (jack) bulkhead NOTE: To order any of the TW2000 antennas with NO MAGNETS, add NM after the (eg NM ). To add Adhesive Tape to the bottom of the same, add AT after the Name (eg AT-07). If you desire both, then use NMAT, eg NMAT-07. Page 1

2 For the TW3000 Family of s For TW3865, TW3870E, TW3872E, TW3967 & TW3972E - refer to Page 1 Embedded Antennas Modifier 4 digits (if applicable) 33-3aaabb-xx-yy-zzzz radome shape and colour 14 = N-Type female NMO = NMO mount Modifiers: ST = short thread Radome Codes: 00 = Dark grey Conical 10 = Dark grey low profile 01 = White Conical 11 = White low profile For AJ Antennas: W = White G=Grey For the TW4000 Family of s 33-4aaa-xx-yyyy (max length 5000mm) NOTE: To order any of the TW4000 antennas with NO MAGNETS, add NM after the (eg NM ). To add Adhesive Tape to the bottom of the same, add AT after the Name (eg AT ). If you desire both, then add them together, eg> NMAT Page 2

3 For the TW5000 Family of s Configuration radome type and colour 33-5aaa-x-yy-zz Cable Length in metres Configuration code: x= 1 = RS232 5V; 2 = CMOS 5V, 3 = CMOS, 3.3V, 5 = RS V, 6 = RS232, 12-36V Cable Length: zz= 05 = 5m Standard, 15 = 15m (premium charged), 25 = 25m (premium charged) Radome Codes: 00 = Dark grey Conical 10 = Dark grey low profile 01 = White Conical 11 = White low profile For the VP6000 Family of s 33-6abbcd-ee-ff-gg 33-6abbcd-ee-ff-gg a = Covered Frequencies: bb = LNA Gain 0 = All GNSS frequencies + L-Band ( MHz) 35 = 35dB 2 = L1/L2, G1/G2, B1/B2, E1 + L-Band 50 = 50dB 3= L1/L2/L5, G1/G2/G3, B1/B2, E1/E5a+b 4-9 = Reserved for future use c = Base Type d = Options 0 = Standard base 1-9 = Reserved for future use 0 = No options ee and ff = connector types: 01 = TNC Female 14 = N-Type Female ** xx = no connector. NOTE: ff defines a second connector (requiring a custom base to be ordered) At this time, ff defaults to xx gg = radome: 01 = White Conical 11 = White Flat top Example: xx-11 Is an antenna which covers all GNSS frequencies + L-Band, provides, 50 db of gain, uses a standard base, has one TNC female connector and a white flat top radome. Page 3

4 For the VC6000 Family of s 33-6xyy-zz Where x= 1 = All GNSS Signals Where yy= 35 = 35dB amplifier 50 = 50dB amplifier zz= 01 = TNC (f ) connector 14 = N-Type connector PN for short SCIGN Radome = For Helical Family of s 33-xyy Where x = 6 = Iridium antenna 8 = Dual band antenna 9 = Triple band antenna 71 = no L-band reception 72 = L-band reception capable Where yy = 00 = for Iridium antenna Page 4

5 For the TW7000 Family of s 33-7aaa-xx-yyyy 07 = SMA female (jack) bulkhead NOTE: To order any of the TW7000 antennas with NO MAGNETS, add NM after the (eg NM ). To add Adhesive Tape to the bottom of the same, add AT after the Name (eg AT-07). If you desire both, then use NMAT, eg NMAT-07. For the TW8000 Family of s 33-8aaa-xx-yyyy (max length 5000mm) NOTE: To order any of the TW8000antennas with NO MAGNETS, add NM after the (eg NM ). To add Adhesive Tape to the bottom of the same, add AT after the Name (eg AT ). If you desire both, then add them together, eg NMAT Page 5