1. Before Getting Started Main Features Accessories 2

Transcription

1 çêðð Ð Í» Š ̱ Š Þ± Ë» Ž Ù«¼»

2

3 For your safety Information contained in this manual is subject to change without notice. No part of this publication may be copied, reproduced, or translated to another language for any purpose. Be sure to read the user manual before starting the operation of the receiver. Do not open the housing. The receiver contains high-voltage components and parts. Even after switching off the receiver still contains high-voltage for a while. Do not expose to rain or moisture. Do not make objects or fluid enter the housing through the ventilation slot. If any spilt liquid went into to the housing, unplug the power cord and call your local Service provider. Do not place close to any heat source. Do not press with hard or heavy object. To protect possible malfunction by lighting, we recommend you to use power surge unit. Call your local dealer for advice. II

4 Contens 1. Before Getting Started Main Features Accessories 2 2. Controls and Functions Front Panel Rear Panel Remote Control Unit 5 3. Connections Connecting to the TV, VCR and Satellite Antenna Connecting DiSEqC switch Connecting to the TV, HiFi system Connecting Smart Card module (Optional) 8 4. Settings and Operations Installation Viewing TV(or Radio) Other Functions System Settings Recent Settings Automatic S/W update via Internet CA Information Appendix Troubleshooting Specification Glossary 39 III

5 Before Getting Started ïòï Ó ² Ú». Easy Menu Function. TV Guide Function. RF Output Function. Electronic Program Guide(EPG) for On Screen Channel Information. Software Upgrading Function through RS-232C Cable by PC. Perfect DiSEqC 1.0 for Various Antenna Systems. Supports of Ku/C band, SCPC and MCPC. Additional Audio Output Function for Connection to Hi-Fi Audio System. Other Functions of Remote Controller, Receiving Level Selection, Channel Editing, Menu Language Selection and Audio Selection. Digital free-to-air Satellite Receiver. NTSC & PAL Output Function Regardless of the TV type, NTSC and PAL channels can be viewed by selection When PAL channel is viewed on NTSC TV, small deletion on up & down sides of the screen may occur and it is normal, as its conversion is managed by software. And darker color on the bottom side of the screen may occur, when NTSC channel is viewed on PAL TV Transponders and 3200 Channel Memory Function. Teletext Supported. Multi Language Function(Menu, Audio) 1

6 Accessories ïòî ß½½» ±» Users Guide Batteries (AAA) Remote Control Unit 2

7 Controls and Functions îòï Ú ±² Ð ²» Turn the power on/off. MENU Shows the menu application. OK Select menu or value on menu item. VOL Control volume, change item on menu or input frequency value. CH Change channel, move menu, or input frequency value. 3

8 Rear Panel îòî λ Ð ²» IP Connection Network interface LNB IN It receives signals from the LNB in the range of 950 ~ 2150MHz. Connect a satellite dish to DIGITAL SATELLITE RECEIVER. LOOP It sends signal to another receiver. AUDIO (R,L) It provides stereo audio output. Connect the audio on TV to AUDIO with RCA cable. VIDEO It provides composite video output. Connect the Video on TV to VIDEO with RCA cable. SPDIF Output for connection to a digital amplifier. RF IN The signal supplied to this connector from a TV antenna will be sent to TV antenna output. Connect a TV antenna to TV ANT IN. RF OUT It provides a modulated audio and video from the receiver. Connect the TV/VCR on TV to TV/VCR with the RF cable. VCR It provides composite video and audio outputs. Connect the VCR scart on VCR(or Decoder) to VCR with scart cable. TV It provides RGB video and Composite video. Connect the TV scart on TV to TV. RS-232C DATA It receives data by connecting to PC for software upgrading. Connect with RS-232C cable a PC and receiver. ON / OFF The switch is to turn on or off the main power of the receiver mechanically. 4

9 Controls and Functions îòí λ³±» ݱ² ± ˲ Open the controller cover on the back and insert two batteries (AAA - 1.5V). MUTE Deactivate current sound. POWER Turn the power on/off. Numeric(0~9) Change channel or input frequency value. CLEAR Clear wrong number input or delete channel from TV (Radio) list or favorite channel list. TV/SAT Select between TV Channels and Satellite channels for RF output. MENU Shows the menu application. EXIT Exit from the menu. OK / LIST Shows channel list, Select menu or value on menu item. RECALL It is to move to previous channel. GUIDE Shows EPG [ELECTRONIC PROGRAM GUIDE] FAV Add TV or Radio channel to the favorite list on Edit TV(Radio) Channels, or watch favorite channel from your favorite list. Channel Change channel, move menu, or input frequency value. Volume Control volume, change item on menu or input frequency value. 5

10 Remote Control Unit Page UP/DOWN Move to previous/next page on TV(Radio), Favorite Channels or Edit TV(Radio) Channels. INFO Shows the information of current channel. Click the INFO button twice, EPG mode will be displayed. When pressed in channel list channels will be sorted in alphabetical order A-Z AUDIO Select Stereo, Main or Sub from multi language channels available. LANG Select the audio language from 2 or more audio language channels available. TEXT Change to Teletext mode. TV Change to TV mode from radio channel. RADIO It is for fast change to radio mode from TV channel. Shows the current Radio program list. SIZE Select between standard 4:3 and wide 16:9 screen sizes. RECENT If you hope to show channel list which you watched TV channel list recently, you have to use this function and may show channel list easily. 6

11 Connections íòï ݱ²²»½ ²¹ ±» ÌÊô ÊÝÎ ²¼ Í»» ß²»²² It is not necessary to adjust power, as the product is of free - voltage (AC 110~220V ) 1. Connect another scart cable from the TV on the satellite receiver to scart socket on the TV. 2. Connect the RF cable from the TV OUT on the satellite receiver to a TV. Connect an antenna to the LNB socket on the VCR or other receiver and the RF modulate on the VCR and the TV ANT.IN. 3. Connect a cable of the satellite dish to the DIGITAL on the satellite receiver 3 íòî ݱ²²»½ ²¹ Ü ÍÛ Ý ½ If you have one antenna equipped with many LNBs or two antennas with one LNB on each, you need a DiSEqC switch. 1. Connect the LNBs to a DiSEqC switch at first. 2. Connect the antenna cable to the OUT connector on the DiSEqC switch and connect the end of the cable to the DIGITAL on the satellite receiver. 7

12 íòí ݱ²²»½ ²¹ ±» ÌÊô Ø Ú»³ Connecting to the TV, HiFi system 1. Connect the RCA cable from the VIDEO INPUT on the TV to the VIDEO on the satellite receiver. 2. Connect a RCA stereo cable from the AUDIO RL on the satellite receiver to the AUDIO RL on the HiFi system. íòì ݱ²²»½ ²¹ ͳ Ý ¼ ³±¼ øñ ±² To get service of Xcrypt encrypted programs, subscribe a Xcrypt Smart card from program provider. Insert Xcrypt smart card into slot for watching encrypted TV programs. NOTE Insert smart card into a smart card slot with facing IC upwards 8

13 Settings And Operations ìòï ² ±² If it is the first time using a receiver, you should set parameters for system configuration. Refer to the following section. 1. Turn on your TV and Satellite receiver. 2. Press the MENU button, main menu screen will appear as shown below. 1. Select Installation on the Main Menu. To enter Installation password is required. The default password is

14 Installations 2. Select Antenna Setting 3. Select LNB Power. If LNB Power is independently supplied from outside source, set the LNB Power OFF. Otherwise set it ON. If DiSEqC 1.2 selects ON, you can set DiSEqC for slectected Satellite. 10

15 Settings And Operations 4. Select correct name of Satellite. If there is no proper satellite name listed, select one from any of USER1 ~ USER If you want to change the LNB type go to LNB TYPE and use / buttons to select the LNB Frequency 11

16 Installations 6. If only one antenna is in use, set DiSEqC mode to disable. If more than 1 antenna According to the option and position of DiSEqC switch, select mini A, Mini B, DiSEqC 1 ~ DiSEqC 4. If the option AUTO is selected the receiver will select the correct position automatically. 7. If you have a DiSEqC 1.2 motorized system to control your satellite antenna you have to select ON on DiSEqC 1.2 If DiSEaC1.2 sets ON, DiSEqC1.2 Settings menu will be active and you can set it up. 12

17 Settings And Operations 8. If you are not using external LNB switch set 0/12V to disable If you are using external LNB switch you can control it by selecting either 0V or 12V 9. Select Search Channels on the Antenna Setting; press OK, all the available Channels will be searched automatically. <Manual search> 1. Select manual search of the installation 2. Select correct name of Satellite. If there is no proper satellite name listed in the item, select one from any of USER1 ~ USER

18 Installations 3. Move to desired TP with CH on the RCU. If there are no transponder data which you want, move to Add New TP and press OK button. 4. Select the desired satellite. And input correct values of Frequency, Polarization and Symbol Rate. Select the Polarization value as Hor of Ver. If you did not know accurate polarization value, select Auto in the Polarization. Once all the parameters are entered, Press OK on Search channels button to scan programs on the TP. If no any channels get scanned manually select the option advanced search Input proper Channel name and input the values of Video PID, Audio PID and PCR PID. Then, press OK button from the Add item. 14

19 Settings And Operations Encrypted or Scrambled channel is marked as $ sign at the beginning of the channel name. After successful completion of channel searching, move to TV channels or radio channels on MAIN MENU to select currently received channels. NOTE Depending on certain TP or satellite, the Network Search function may not work. Multi Sat. Search To use the Multi Sat. Search function, Move: MAIN menu -> Installation -> Channel Search -> Multi Sat. Search Press OK button on Select Sat. mode. Press OK to choose the desired satellite Press the RED button present in the RCU to scan the selected satellites. 15

20 Installations [ Network Search ] Network search function is enable to search new TPs and all channels in all TPs. * How to go Network Search menu : Main menu -> Installation --> Channel Search --> Select Search Channels -> Choose Network Search mode in the Search Channels. <DiSEqC 1.2 Limit Settings> If you have a DiSEqC 1.2 motorized system to control your satellite antenna you have to make the following setting. First, you must select ON on DiSEqC 1.2 of LNB Setting in the Setting. < Please refer to the Setting section > 1. Move Antenna Settings menu. Select DiSEqC 1.2 Limit Settings of the Antenna Setting 16

21 Settings And Operations 2. Move West- East 3. Store Position Save DiSEqC setting. 17

22 Installations 4. Go to Position Move DiSEqC position to be set by applicable satellite. 5. Go to Reference Move to DiSEqC 0 18

23 Settings And Operations ìòî Ê» ²¹ ÌÊø± Î ¼ ± 1. Press the Power button. 2. Press the TV(or Radio) button. 3. If you want to see all TV channel list, click the OK button and then select the TV Channel(or Radio Channel). TV Channel (or Radio Channel) window will appear. Press [ ] button on RCU, you will see current Satellite name box. Select any satellite in the satellite name box, only the TV list of selected satellite will be displayed. 1. Press FAV key. 2. Select a CH. To move to next or previous page, press PAGE UP/DOWN buttons on Favorite TV(or Radio) List. Edit TV Channels / Edit Radio Channels From these menus you can see in the installation menu. Press OK button from Edit TV List in the installation menu and similar screen will be shown as below. 19

24 Viewing TV(or Radio) Arrange channel To change the channel orders from TV List, press OK button from your desired channel. Then you should move to the desired number by pressing CH, after then press OK button. Its orders will be changed. Delete channel Press CLEAR button twice on the channel list for deletion. Create favorite channel Press FAV button on t your favorite channel, the channel will be moved to Favorite List box. 20

25 Settings And Operations Sort Select SORT button in the Edit TV List screen. You can select the order you want. Lock Channel Press F.BK button on the lock channel to prevent unauthorized access to these channels. 21

26 Viewing TV(or Radio) Edit Channel Name Press OK button from Edit TV List or Edit Radio List in the installation menu. 1. Press INFO button on Edit TV or Edit Radio List. 2. Press OK button on the Channel name menu. 22

27 Settings And Operations 3. To change character set (small letter, number), press INFO button. To save the channel name, press MENU button. To change the name of satellites, go to the installation on MAIN menu. Select Channel Search, press INFO button. 23

28 Viewing TV(or Radio) Delete channel by SAT Delete all channel of applicable satellite by satellite name. Parental Control You can protect your installed data and information by locking the menu. Channel lock allows you to lock the channel with the password in order to prevent from accessing of the channel by your children or some unauthorized person. Default password is This can be changes here. 24

29 Settings And Operations ìòí Ñ» Ú«²½ ±² Audio Selection If broadcasting channel is supporting multi language, different language can be selected from Audio Selection. 1. To select different language on current channel, press LANG button on RCU. 2. Press OK button on your favorite language. According to different audio data on each channel, different audio language types can be selected. TV Guide Press GUIDE button of RCU for channel information. This function works in digital mode only. 25

30 Other Functions Teletext function Pressing the TEXT button will open a Teletext page. Select teletext pages with the numeric buttons on the RCU. From Teletext Screen CLEAR Overlay background screen and teletext mode according to the following order(transparency - Teletext only - Opacity) INFO Hold of current Teletext page PAGE UP/DOWN Move previous and next page in ten CH UP/DOWN Move previous and next page in one FAV/TV/RADIO/F.BK/LANG/AUDIO 100/200/300/400/500/600 page level 0 ~ 9 Select Teletext page EXIT Exit teletext mode 26

31 Settings And Operations [ Screen Division Function ] You can check other channels (still picture mode) while you are watching a specific alive channel with this function. 1. In the full screen mode, press "F5 key in the Remote Control then you will get 4 divided pictures. 2. By pressing "VOL " key, you can select a frame one by one. Selected frame will provide you a live picture. 3. By pressing CH key, you can change the channel in the selected frame. 4. Press Exit key, then the function goes to the full screen mode. 5. If you press OSD key one more time in the No.1 stage above, you will have 13 divided pictures and operations are same as above. 27

32 System Settings ìòì Í»³ Í» ²¹ From these menus you can select System Setting on the Main Menu. Language Setting Use < > keys to select the desired language. Audio language Only if a current channel contains 2 or more audio language information, set the Audio Language as English or other favorite language. Menu Language For menu language selection, select desired language from Menu Language of system Settings. Subtitle Mode Subtitle is a printed version of the dialogue, narration, and/or sound effects of a TV program. Subtitle will appear at either the top or bottom of the screen during. 28

33 Settings And Operations Subtitle Language Please select the primary and secondary languages in your area. * From these menus you can select System Setting on the Main Menu. TV Standard Except for a few, most countries are using PAL system for TV signal, accordingly set TV. Standard as PAL. To be more flexible for NTSC or PAL signal from different satellites, select MULTI for automatic signal conversion. Time Adjustment To set the receiver time for EPG (Electronic Program Guide), set the time according to GMT (Greenwich Mean Time) by using CH. If EPG in England is needed to set, adjust as 00:00. In the case of Beijing, adjust as 08:00. If you want to set the time manually select the option GMT OFF and set the time in TIME SETTINGS option. Time Settings Here you can set the time manually. Before the time is set manually remember to set the time adjustment to GMT OFF. Clock : set the local time. Sleep Timer : set 10 ~ 240 minutes On Timer : set the timer and the channel. Off Timer : set the timer and the channel. Time Adjustment To set the receiver time for EPG(Electronic Program Guide), set the time according to GMT(Greenwich Mean Time) by using CH. If EPG in England is needed to set, adjust as 00:00. In the case of Beijing, adjust as 08:00. Time Settings Clock : set the your local time. Sleep Timer : set 10 ~ 240 minutes On Timer : set the timer and the channel. Off Timer : set the timer and the channel. 29

34 System Settings TV Aspect Ratio Press SIZE button when you watch on TV or go to System Setting menu. Select TV Aspect Ratio and you can change You can change 4:3, 4:3Pan, 16:9Full or 16:9Pillar modes. OSD/Screen Setting CH to CH Selection While you are changing the channel, it shows whether the blank screen or not. Transparency Adjust Transparency on the ODS(On Screen Display) OSD Timeout Set up OSD Timeout for hidden on / off TV List Timeout TV List Timeout Set up the TV channel list timeout for hidden on /off 30

35 Settings And Operations RF mode If the satellite receiver is connected to the TV with a RF cable, you have to set the RF mode, which is dependent on the country where the satellite is being used. Remove this sentence. 1. Select the accurate RF System type of country the satellite receiver is used. 2. Select the Channel No (Select a channel of RF output of TV set that you are using). 3. Select TV or SAT on the RF out. S/W Version Select S/W Version. Copy Mode You can choose Copy All, Copy Program, Copy Channel, Copy Key or Copy BGI modes. Factory Default You can choose All Information, Setting values or Searched Channels modes. 31

36 Automatic S/W update via Internet ìòë λ½»² Í» ²¹ Recent List Setting If you hope to show channel list which you watched TV channel list recently, you have to use this function and may show channel list easily. Press Main Menu and select System Settings Select OSD/Screen Setting 32

37 Settings And Operations Select Recent List Setting and choose On or Off. If you choose OFF and press recent key, you couldnt show recent list and add channel list. However, it is memorized channel list(disappear) before OFF setting 33

38 Automatic S/W update via Internet Function of Recent List 1. If you watch TV/Radio channel over 5minutes, automatically added Recently list. The latest watching channel is located in high rank. If you watch TV channel in Recent List over 5 minutes, it is changed a high rank in Recent List automatically. 2. In Recent List, you can move curser and select channel. If you press Ok button, you can watch the selected channel. 3. Button Clear Key : Delete selected channel in Recent List. 4. Button Red Key(F1 key): Delete all channel in Recent List. Favorite Hot key If you press Green Key(F2 key) when you are watching TV, selected channel is added Favorite Group as below. You can select Favorite Group to save. Previously you added favorite channel list, you can show the message This channel exist Favorite 1 34

39 Settings And Operations as below. ìòê ß«±³ ½ ÍñÉ «¼» ª ²» ²» ͱº» ¼± ² ± ¼ ²¼ Ð Í» ²¹ò ø ±½» ª» ±«¼ ¾» ½±²²»½»¼ ²» ²» ½ ¾» Auto Update Check During booting, it will check updated software version on the server, and notice w hether it needs to update or not. 35

40 Automatic S/W update via Internet Network Information DHCP : receive IP address automatically. STATIC setting : setting fixed IP address use or not. Input IP address, Gateway and Subnet Mask by RCU. S/W Upgrade S/W Version Check Turn On/Off of automatic updated software check while boot-up. Start Download Update the latest software. 36

41 Settings And Operations ìòé Ýß ²º± ³ ±² øñ ±² It shows information of inserted smart card. 37

42 Troubleshooting ëòï Ì ±«¾» ±± ²¹ SYMPTOM No picture display and no LED channel display No picture display with normal LED channel display No satellite channel with MAIN MENU screen on No sound with normal screen display Remote control unit does not work SOLUTION Check the power connection 1. Check the connection with TV 2. Check the connection between TV outside input and receiver cable 1. Check the LNB, Frequency, Polarization and Symbol Rate from Installation menu 2. Check the connection of receiver or Antenna Angle 1. Check between sound output connector and TV 2. Check if it is not in MUTE condition Check if the batteries in remote control unit are Dead ëòî Í»½ º ½ ±² LNB/Tuner MPEG VIDEO Audio General Data RF input frequency RF input level LNB control LNB power LNB tone switch Video 950 to 2,150MHz -65 to -25dBm DiSEqC1.0/1.2 13V/18V(Max.400mA) 22KH±2KHz(0.6Vp-p) MPEG-II Main Level Audio MPEG-II layer I&II Resolution Video output level 1Vp-p into 75 Aspect ratio 4:3, 16:9 Frequency range 20Hz to 20KHz Sampling frequency 32/44.1/48KHz Frequency response 20Hz to 20KHz Hi-Fi Quality Digital stereo Audio output level 2V rms into 600 Supply voltage (100~240V AC, 50/60Hz) Power consumption 25W(Standby 10W) Operating temp. 0 ~ 50 Storage temp. -40 ~65 Dimensions Weight 300(W) 230(D) 64(H)mm 2.0Kg 38

43 Appendix ëòí Ù ± LNB Low Noise Block converter. The LNB is an electronic unit mounted on satellite dish to receive signals reflected by the dish and convert to signals. L.O. frequency Local Oscillator frequency as a part of LNB. It converts the satellite frequency to usable signals for the receiver. Polarization Polarization allows several programs to be fitted into same frequency band. Symbol Rate Size of the digital package transmission Parental Control The function is to allow parents to lock channels for unsuitable viewers. A locked program can only be unlocked with the password. DVB Digital Video Broadcast. International standard for digital TV broadcasting MPEG Moving Picture Experts Group, A system for compression of digital data RF Radio Frequency EPG Electronic Programming Guide. Program information is displayed on the TV screen, depending upon the satellite condition. MHz Abbreviation for Megahertz. The prefix mega means million, and Hertz means cycles per second. DiSEqC Digital Satellite Equipment Control NTSC National Television Standards Committee PAL Phase Alternate Line Ku band 11~18GHz Frequency 39

44 Glossary C band 3~4GHz Frequency SCPC Single Channel Per Carrier MCPC Multi Channel Per Carrier PID Packet Identifier. TP Transponder SCART, RCA A connector for connection of Satellite receiver, VCR and TV sets. VCR Video Cassette Recorder. 40

45 MMNA8KY00IP3G00