T5-RM HD MITS. User Manual. 3-Dmed LEARNING THROUGH SIMULATION

Transcription

1 T5-RM HD MITS User Manual 3-Dmed LEARNING THROUGH SIMULATION

2 T5-RM HD Minimally Invasive Training System Thank you for purchasing the T5-RM HD MITS from 3-Dmed Each has been fully tested prior to shipment and is easy to setup and use FEATURES: LCD Monitor On/Off Switch Simulated Laparoscope (3-Dmed SimScope ) Pedestal Work Area Light Switch Ports for Trocars and/or Instruments Access to Work Area 2

3 Quick Guide Size & Weight Length: 21 (535cm) Height: 12 (305cm) Width: 135 (345cm) Weight: 18 lbs (8 kg) Your instruments can be inserted into any of the fourteen ports They can be used with or without trocars The trainer comes with both 5mm and 10mm grommets The grommets are easily removed or replaced The trainer has a generous, well-lit work area It will accommodate either arti cial anatomical structures or animal tissue Consider using an absorbent pad under animal tissue Monitor Adjustments: To make adjustments, push the button Use the arrows to adjust different functions Contrast - It increases/decreases the separation between light and dark Brightness - Adjusts the light level on the screen Hue (Color) - Controls the level of the color Saturation - Increases or decreases color in relation to brightness Sharpness - Adjusts edge contrast of objects being viewed Color Temperature - Cooler is generally better for tasks, our light is cool SimScope The SimScope can move in and out to change the eld of view and swivels to provide a full range of motion It will t into any of the ports Using Alternate Displays: The camera image can be sent to any other television monitor that has an RCA video input, such as a large TV Simply remove the RCA plug from the gold RCA jack, and attach an RCA female/male extension cord (not supplied) between the SimScope and the alternate monitor s video input This works great for lectures or demonstrations Recording and Using Multiple Monitors: Activity can be digital recording and analog recording by connecting the 3-Dmed SSVI07 Video Interface (sold separately) between the trainer and a digital storage device (computer/network) Additionally, the SSVI07 can split the input signal and can use up to four monitors For more information, please visit our website 3

4 Setup Instructions 1 Lift the lid by the black knob to open 2 The power cord is stored in the t r a i n e r R e m o v e t h e c o r d b y unhooking the Rip-Tie strap The cord is retained in the strap for transportation or storage 3 Mount the SimScope (see p3) Then, plug the black cord into the receptacle marked 9v DC on the right side of the trainer 4 Plug the white RCA plug into the receptacle 4

5 Setup Instructions (continued) 5 Attach the power cord on the side of the unit Plug into a standard 120v AC outlet 6 Once trainer is powered, press the button for two seconds The red LED light will turn green when monitor is on When turning the monitor off, press the button for one second 7 To illuminate the work area, press the black switch (labeled ) that is located on the right side of the trainer 8 If monitor adjustments are needed, press the button Use the arrows to choose the setting Use to adjust the setting The button should be set to AV NOTE: The monitor is Liquid Crystal Display (LCD) and care must be exercised regarding the surface of the screen To clean: use a soft cotton cloth lightly dampened with water, or a commercial computer LCD monitor cleanser, or use a solution of 50% isopropyl alcohol and 50% distilled water Products containing ammonia should not be used Do not apply any cleaning solutions directly onto the screen Never use cleaning products that contain abrasives or strong solvents Turn monitor off when not in use 5

6 Transferring Screen Module to Pedestal (Please read the entire procedure and refer to the gures as directed before proceeding) 1 Separate the trainer and pedestal Fold the pedestal 90 and stand it vertically with the slots to at the top Place it near the trainer 2 Unlatch the screen module and leave it in the closed position Locate the black thumbscrews on the back of the module and remove them 3 Grab the screen module by the knob and near the locating tab Using the knob, lift the assembly straight up clearing it from the mounting ange on the hinge 4 Position the tabs on the bottom of the screen module into the slots on the pedestal until they are fully seated The screen will face the holes in front of the slots 5 Continue to hold the screen assembly while securing it to the pedestal with the thumbscrews through the pedestal Tighten securely 6

7 Returning Screen Module to Trainer Body 1 Position the mounting ange for the module in the upright position 2 Hold the screen module while removing the thumbscrews that retain it to the pedestal 3 Remove the module from the pedestal and feed the black cord back into the trainer body as you guide it into position on the mounting ange Avoid pinching or twisting of the cord The screen module must be in the horizontal position when placed on the mounting ange 4 When fully seated on the ange, secure the thumbscrews through the back of the module to the mounting ange 7

8 Warranty In order to provide warranty or future service, please contact us via at: prior to taking any action This will help expedite the process Problems can be resolved by or phone 3-Dmed, a division of 3-D Technical Services Co, warrants this Product against defects, material, or workmanship subject to the following conditions: 1 MONITOR and CAMERA: These items are covered by their manufacturer s warranty for a period of one year 3-Dmed will act as liaison in the case of your claim, but nal determination of coverage is the manufacturer s decision 2 LABOR: For a period of 90 days from the date of purchase, if 3-Dmed determines the Product (part) to be defective, we will repair or replace the Product (part) at no charge After the warranty period, we will provide an estimate for labor charges upon request 3 PARTS: 3-Dmed will replace defective parts with new or rebuilt replacements for a period of 90 days After the warranty period, parts are available through 3-Dmed and pricing will be provided upon request TO OBTAIN WARRANTY SERVICE: YOU MUST OBTAIN A RETURN AUTHORIZATION NUMBER via phone or BEFORE sending the unit back The Product must be sent in its original packaging, or packaging affording an equal degree of protection, to 3-Dmed with insurance for its full value Uninsured parcels are sent at YOUR RISK for loss or damage This warranty does not cover user cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, or modi cation to any part of the Product This warranty does not cover damage due to improper operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than a trained technician at 3-Dmed This warranty is invalid if the factory applied serial number has been altered or removed from the Product 8

9 The 3-Dmed SimScope SETUP & ADJUSTMENTS Note: Please remove lens cap before using 1 The SimScope can be installed in any port Simply remove the grommet from the desired port To do this, press the outer edge of the grommet in toward the center then down ( g1) Figure 1 Figure 2 A Figure 3 2 Insert the camera end of the SimScope into the hole ( g2) Grasp the swivel collar and press until it snaps into place 3 Connect the black power cord to the receptacle marked 9v DC below the light switches on the right side of the trainer 4 Connect the white RCA plug to the gold RCA receptacle marked under the power receptacle 5 To increase the resistance of the ball joint movement: tighten the three phillips screws ( A g3) with a #1 phillips screwdriver Adjust in small increments Do not over tighten! 6 To adjust the resistance of the shaft slide movement: turn the insert in the tension adjustment boss (arrow g3) with a small at blade screwdriver Turn clockwise for more resistance, or counter clockwise for less Adjust in small increments DO NOT OVER TIGHTEN or DAMAGE to the shaft WILL RESULT 7 To remove the SimScope grasp the swivel collar placing your fore nger under the tension adjustment boss for leverage, and pull out with a rocking motion ( g 3) 8 To replace a grommet, squeeze it on opposite sides and t the slot in the grommet over the edge of the hole ( g4) Work your way around the hole Figure 4 9 If there s a need to adjust the focus of the camera lens, you must rst loosen the set screw in the side of the lens body with a 05 hex key (Allen wrench) Adjust the focus by screwing the lens in or out then gently secure the set screw to maintain that setting 9

10 T5-RM HD MITS - Symbol Legend - POWER, ON AND OFF - MENU ACCESS or MONITOR CONTROL NAVIGATION - ADJUST DISPLAY VALUES or CHOOSE MONITOR CONTROL FUNCTION - DISPLAY VALUES - SWITCH INPUT MODES - LIGHT SWITCH - RECEPTACLE FOR SIMSCOPE VIDEO CAMERA 12v DC - RECEPTACLE FOR SIMSCOPE POWER CORD - WARNING: ELECTRICAL HAZARD - WARNING: DISCONNECT POWER PRIOR TO ACCESS SCOPE AND LIMITS OF USE This Product is designed for laparoscopic surgical training tasks This Product is intended for simulation and training purposes only This Product is able to house animal tissue, for training purposes Task inserts intended for use inside the MITS can be purchased at www3-dmedcom This Product is not to be used on or with human patients Only use this Product with the appropriate power source Unplug the Product when not in use D TECHNICAL SERVICES FRANKLIN, OHIO, USA MODELS: TRLCD03-240, TRLCD TRLCD06-240, TRLCD INPUT: VOLTS AC 50-60Hz MADE IN USA 10

11 Laparoscopic Task Inserts Soft Tissue Suture Pad Playground Skill Building Task 1 Loops and Wire Skill Building Task 2 Pea on a Peg Tray of Organs Skill Building Task 3 Wire Chaser Skill Building Task 4 Post and Sleeve Practice Board for FLS Skills Vaginal Cuff and Holder Bowel Sections Penrose Drain and Holiotomy Holder 11

12 3-Dmed 255 Industrial Drive Franklin, OH 45005, USA +1 +(937) www3-dmedcom Sales +1 +(612) Check Us Out On: