OLEDWorks Lumiblade OLED Panel Brite 3 FL300 ww Warm white 3000K

Transcription

1 1 OLEDWorks Lumiblade OLED Panel Brite 3 FL300 ww Warm white 3000K Third time truly functional OLED-light When it comes to lighting OLEDs inspire on a whole different level. There is the unique quality of the light itself. In combination with other characteristics e.g. the razor-thin shape and the instant glare-free light when switched on, OLEDs can be used to realize innovative applications and designs. With its 3 rd generation of the OLED panel Brite FL300 OLEDWorks brings OLED lighting again further into functional lighting applications, by featuring a more efficient and more beautiful OLED lighting experience. With the luminous flux of up to 300 lumens the Brite products are still the brightest OLED panel commercially available worldwide. The Brite 3 FL300 family products are available at three integration levels making it the ideal building block for every OLED lighting application to be used in the area of functional lighting. These new FL300 OLED panels are already the third family of bright OLEDs and now in three different shapes and still two different color temperatures which will make it even more easy to bring functional OLED lighting to places or products that require beautiful and functional lighting at the same time. The new advantages: Efficient: Efficacy of more than 80 lm/w Beautiful: CRI of >90 and R9 >50 The well-known advantages: Brightest warm white OLED panel commercially available with up to 300 lumens. Thin Film Encapsulation for ultimate reliability. Ideal for applications in functional general lighting systems. Warm white color temperature - 3,000K Low thickness of 1.4 to 2.1 mm All the known advantages of OLED technology: thin homogenous instant glare free

2 2 Description The OLED Panel Brite 3 FL300 ww is a flat light source. Focusing on general lighting applications, OLEDWorks OLED Lighting is developing products with a high lumen output at low costs. One further significant step in this direction is the range extension of the OLEDWorks OLED Panel Brite 3 FL300 ww which are available at three different integration levels. Introduction OLED is a large-area diffuse light source. Unlike incandescent bulbs, which generate light by passing electricity through a wire, or fluorescent lamps, which pass current through a gas, OLED lighting works by passing electricity through one or more extremely thin layers of organic semiconductor material. These layers are sandwiched between one positively and one negatively charged electrode. The sandwich is placed on a sheet of glass or other transparent material known as the substrate. The OLED is protected by a thin-film encapsulation and a flat heat spreader on the rear side. When current is applied to the electrodes, they inject positively and negatively charged holes and electrons. These recombine in the organic layer of the sandwich and create a brief, high-energy state called exciton. As this layer returns to its original stable, non-excited state, the energy flows evenly through the organic film causing it to emit light. In contrast to virtually all previous OLED products the OLED Panel family Brite 3 FL300 is a product that for the first time attains the status of a general lighting application. As part of its ongoing product improvement, OLEDWorks will continue to develop the OLED Panel family Brite 3 FL300 to higher levels of performance in different shapes and sizes, like now with the Brite 3 range extension. This document refers to Product Integration Product Code Level OLED Panel Brite 3 FL300 ww Level 1 1 LPB3300S1WWL101 OLED Panel Brite 3 FL300 ww Level LPB3300S1WWL105 OLED Panel Brite 3 FL300 ww Level 2 2 LPB3300S1WWL201

3 3 Standard compliance and sustainability OLEDWorks products are environmentally friendly and provide efficient illumination without the use of hazardous materials. This product is RoHS (EU Directive 2011/65/EU) and IEC (OLED safety) and IEC (OLED performance) compliant. This product is compliant with UL8752 (OLED safety). This product is UL recognized in file E Within the UL report certain Conditions of Acceptability are mentioned as follows. When installed in the end product, the following shall be taken into consideration: 1. These products have been evaluated for connection to an isolated DC Class 2 constant current power source. Caution: Do not operate the OLED panel with other than UL-Class 2 power supplies. 2. This product has been evaluated for use in dry or damp locations. 3. The OLED panel temperature shall not exceed 80 C. 4. Input leads to the OLEDs are intended for factory installation only. Strain relief to be considered in the end-use application if leads are subjected to mechanical stress. 5. Input leads to the OLED panels shall be sufficiently separated from higher voltage conductors in the end-product in compliance with end-product requirements.

4 4 System Description Remark Indoor / outdoor Indoor buildings location with insignificant shock and vibration Ingress protection not applicable for OLED components Classification Applicable in applications with Application standard IEC61140 Class III (IEC) and Class II (UL) protection OLED color White Carrier material Glass Cable AWG 26 Brite 3 FL300 ww Level 2 Connector 5-pin Molex Picoblade RoHS conform Yes 2011/65/EU Operational environmental conditions* Specification item Value Unit Condition Ambient temperature C Relative humidity %rh no dew, no water spray, a maximum %rh of 60 is Recommended internal operation temperature (OLED organic temperature) Maximum internal operation temperature (OLED organic temperature) recommended. 35 C local temperature 80 C local temperature, for T > 40 C lifetime will be reduced. * please refer to Thermal Characteristics on page 20 for more information. The Brite 3 FL300 ww is designed for indoor use only. Do not expose to water or excessive moisture. Storage conditions* 1 Specification item Value Unit Condition Ambient temperature C Relative humidity 5 85 %rh no dew, no water spray * 1 Recommended storage temperature is between C with a humidity < 65 %rh. Transport conditions Specification item Value Unit Condition Ambient temperature C Relative humidity 5 85 %rh no dew, no water spray

5 5 MECHANICAL DIMENSIONS Specification item Value Unit Condition Brite 3 FL300 ww Level 1 length ± 0.2 mm Brite 3 FL300 ww Level 1.5 width ± 0.2 mm height 1.4 ± 0.15 mm weight 38 ± 1 gram Brite 3 FL300 ww Level 2 length 127 ± 0.2 mm dimensions excluding cable width 127 ± 0.2 mm height 2.1 ± 0.2 mm excluding Molex Picoblade plug diameter screw 3.2 mm for fixation with M3 screws opening distance screw 127 ± 0.2 mm openings weight 70 ± 1 gram Light emitting area length ± 0.3 mm Brite 3 FL300 ww Level 1 width ± 0.3 mm Brite 3 FL300 ww Level 1.5 area cm 2 Brite 3 FL300 ww Level 2

6 6 Diagrams of the Brite 3 FL300 ww Level 1 Figure 1: Brite 3 FL300 ww Level 1 front and side view (top), rear view (bottom)

7 7 out-coupling foil default tolerance is ± 0.2mm Figure 2: Detail B of Figure 1; Brite 3 FL300 ww Level 1 PCB metal foil Figure 3: Detail C of Figure 1 corner of PCB frame - integration level 1 Figure 4: Detail D of Figure 1 contact pads and distance to corner - integration level 1

8 8 Diagrams of the Brite 3 FL300 ww Level 1.5 Figure 5: Brite 3 FL300 ww Level 1.5 front, rear and side view (top), details (bottom)

9 9 Diagrams of the Brite 3 FL300 ww Level 2 default tolerance is ± 0.2 mm Figure 6: Brite 3 FL300 ww Level 2 front and side view (top), rear view (bottom)

10 10 Figure 7: Details A and B of Figure 6 solder orientation on PCB and thickness of metal back plate - integration level 2 Mechanical handling OLEDs are electronic components and should not be tampered with in any way. They are made of thin glass with potentially sharp edges. Avoid mechanical stress, such as shock, pressure, bending, torsion and especially point loads on the OLED. To avoid fingerprints on the front side, preferably handle the OLED from the sides. Gloves or finger cots are recommended at all times whilst handling the OLED. Avoid contact with water. Do not submerge OLEDs in any kind of solvent, acid, base, salt or other chemicals. In case of damage to the product, disconnect the product from power supply without touching the damaged parts. Do not reconnect the product. Contact the manufacturer or a qualified service technician. Improper use can cause OLEDs to break resulting in glass splinters. Please handle all OLEDs with care to avoid breakage as especially the edges of the OLED are very delicate. Use of protective gloves is advised, in particular with broken OLEDs or OLEDs with sharp edges/corners. Avoid direct contact with broken OLEDs. The product may become warm during normal use. Do not cover with materials that are flammable.

11 ELECTRICAL AND OPTICAL CHARACTERISTICS - OLED 11 Electrical characteristics Specification item Value Unit Condition OLED rated current, I in rated A OLED voltage at t=0, U in / 1.0 V DC Iin rated OLED voltage at end of life, U EOL = U in max 22 V DC Iin rated Power consumption at t=0, P in 4.0 W Iin rated Power consumption at end of life, P EOL = P in max 4.7 W Iin rated All data nominal at stabilized conditions after 5 min warm-up, T organic = 35 C. OLED drivers Use of power supplies with dedicated controls for turning off output power if an OLED fails is recommended when operating the OLED Panel Brite 3 FL300 ww. Examples of recommended drivers are shown in the table below. These drivers all have sockets compatible with the Molex Picoblade connector Product Supply voltage Output channels Philips Product Code Driver D230V 80W/ /1A/28V TD/A 8CH 120, , 277 V AC Driver D024V 10W/0.1A-0.4A/28V D/A 24 V DC Driver D024V 10W/0.1A-0.4A/28V DMX 24 V DC Dimming Both pulse width modulation (PWM) and amplitude modulation (AM) techniques can be used to dim the OLED. More detailed information can be found in the design-in guide for the Brite 3 FL300 family. OLED connection The OLED Panel Brite 3 FL300 is available at different integration levels. At integration level 1, no cable is attached to the device. Integration levels 1.5 and 2 provide a cable with a Molex Picoblade connector type compatible with the Lumiblade OLED drivers and resistors integrated in the cable which support the recognition of the correct panel settings by the drivers. At integration level 1 the Brite 3 FL300 features contact areas on the rear side (see Figure 8). Area A and D provides contact pads A1 or D1 (plus) and A2 or D2 (minus). The individual signals for the 5-wire connector are shown in Figure 9. Only one of the interface areas need to be used for electrical contact.

12 12 A D1 D2 Figure 8: Contact pads of the Brite 3 FL300 ww Level 1 The function of the connector is illustrated in Figure 9. A1 and D1 link to the plus pole and A2 and D2 link to the minus pole. Using the Molex connector of the integration levels 1.5 and 2 according to the schematic in Figure 9 the dedicated OLED drivers automatically recognize the panel and drive it correctly. 5pin - Molex Picoblade Figure 9: Channel connections from driver to the Brite 3 FL300 ww Level 2 Specification item Value Unit Remark Wire cross-section 26 AWG voltage rating: 300 V circuits: 5 Wire length 198 ± 5 mm Connector (header/crimp) Molex Picoblade male

13 Voltage [V] 13 OLED voltage The voltage of the OLED depends on the point of operation, temperature of the organics and the age of the OLED. As a result, the OLED voltage is affected by the ambient temperature. During operation the temperature of the organics may increase, especially shortly after powering the OLED. At constant current control, this may result in a change in voltage. Example of voltage evolution after a cold start at different ambient temperature levels is shown in Figure 10. The initial voltage drop is due to the device heating up until steady state (approx. 5 min after turning on). Besides this the voltage/organic temperature depends on the ambient temperature. 27,00 25,00 23, C 21,00 19, C +15 C +5 C -10 C 17,00 15, time after switch on [s] Figure 10: typical voltage evolution after start-up at different ambient temperatures, integration level 1, vertical orientation, air, Iin rated = A Short circuit behavior If an OLED fails it can fall into a short circuit. Such a condition may mean that no light is generated the OLED is heated locally, i.e. one small spot of the OLED surface gets hot the current still flows through the OLED but the voltage drops to a lower value. In case such a fault occurs turning off the OLED is recommended. No indication based on internal tests or market feedbacks that shorts appear for Brite 2 or Brite 3

14 14 Optical characteristics FL300 ww* 2 Specification item Value Unit Condition Luminance, nominal 8500 cd/m I in rated = A, perpendicular A, perpendicular Luminous flux 300 ± 10 % Iin rated = A with L70B50 = 30khrs 100 ± A with L70B50 = 100khrs Luminous efficacy, nominal 75 I in rated = A A Color White Chromaticity x, nominal integral measurement, CIE 1931 Chromaticity y, nominal Chromaticity u, nominal integral measurement, CIE 1976 Chromaticity v, nominal Duv center of color box with respect to BBL Color spec limits CIE xy corner coordinates of area in colorspace Color spec limits CIE u v corner coordinates of area in colorspace CCT 3000 Iin rated = A Color Rendering Index: >90/ Iin rated = A CRI / R9 TM-30 metrics: 85 / Iin rated = A R f / R g Surface chromaticity uniformity Referring to IEC Angular chromaticity uniformity Referring to IEC Homogeneity 90% 9 point measurement, min/max, Iin rated = A * 2 all data for stabilized electrical conditions of the device after 5 min warm-up period, integration level 1. Figure 11: Color vector graphic based on TM-30 metrics for Brite 3 FL300 ww

15 luminance [cd/m²] emission [a.u.] OLED spectrum 15 Typical spectra of the OLED at different driving currents are given in Figure Wavelength [nm] FL300 ww 215mA FL300 ww 150mA FL300 ww 71mA Figure 12: typical emission spectra of the Brite 3 FL300 ww at different driving currents (I = A, A, A) Current voltage luminance characteristics current [ma] Figure 13: Luminance versus forward current at room temperature, integration level 1

16 luminuous flux [lm] voltage [V] 16 19,5 19,0 18,5 18,0 17,5 17, current [ma] Figure 14: Voltage versus forward current at room temperature, integration level 1 500,0 450,0 400,0 350,0 300,0 250,0 200,0 150,0 100,0 50,0 0, current [ma] Figure 15: Luminous flux vs current, integration level 1

17 efficacy [lm/w] 17 90,0 88,0 86,0 84,0 82,0 80,0 78,0 76,0 74, current [ma] Figure 16: Efficacy versus current at room temperature, integration level 1 Homogeneity of optical parameters The OLED Panel Brite 3 FL300 is a large area device and the luminance value may depend on the location within the active area. A very small color point distribution may also be observed. Figure 17: Typical luminance distribution for a Brite 3 FL300 ww Level 1. Operation conditions: vertical in air, RT (= 25 C), I = Iin rated

18 CIE 1931_y luminance [cd/m²] 18 Angular dependency The luminance (measured in cd/m 2 ) of the OLED light depends on angle of observation. Figure 18 shows typical values for the OLED Panel Brite 3 FL300 ww Level 1 operated at different driving currents viewing angle [ ] 215mA 140mA 71mA Figure 18: Luminance as function of the viewing angle. Driving currents I= A, A, A 0,415 0, ,405 0,4 0 0,395 0,39 0,385 0,425 0,43 0,435 0,44 0,445 0,45 CIE 1931_x BB line 215mA 140mA 71mA Figure 19: CIE x/y as function of the viewing angle. Driving currents I = A, A, 0.215, integration level 1

19 CIE 1976_v' 19 0,53 0, ,52 0, ,51 0,24 0,245 0,25 0,255 0,26 CIE 1976_u' BB line 215mA 140mA 71mA Figure 20: CIE u /v as function of the viewing angle. Driving currents I = A, A, A, integration level 1 THERMAL CHARACTERISTICS OLEDs can generate a certain amount of heat. Despite the fact that no active cooling is required, the panels should not be covered in order to avoid heat accumulation. The OLED temperature during operation depends on ambient conditions and driving current. Indicative values for internal (organics) temperature of the device can be measured at the glass surface at the center of the device with a thermocouple attached. Typical temperature for the Brite 3 FL300 ww Level 1 is 35 C with the following set-up: I = I in rated = A T ambient = RT = 25 C vertical orientation climate chamber, no active convection.

20 20 Lifetime Luminous flux reduces with lifetime of the OLED. The luminous flux of the Brite 3 FL300 decreases to approximately 70% after 30,000 hours at rated current. Brite 3 FL300 ww Specification item Value Luminous flux Condition OLED Panel Lifetime L70B50 30,000 hours Iin rated = A, Torganic = 35 C OLED Panel Lifetime L70B50 100,000 hours A, T organic = 30 C Voltage increases over lifetime of the OLED; color and homogeneity of the panel may also change. Storage lifetime Under the recommended storage conditions the shelf life of the OLED is 2 years. General handling recommendations and care Cleaning Please avoid scratching the front side with any hard or sharp objects. OLEDs can be cleaned with any soft textile. If required use a damp cloth but avoid extensive moisture. Use of a compressed air spray to remove regular dust from the individual panels is advised for everyday cleaning. Should fingerprints or more persistent contamination occur, isopropanol applied to a lint-free cloth can be used to gently clean the surface of the OLED. Clean using circular movements beginning at the center of the OLED and moving outwards towards the edges. Contact with water is to be avoided. Storage and operating Please note that the recommended storage temperature is 15 C to 25 C. The recommended relative storage humidity is 65% or lower. Avoid exposing OLEDs to UV light. Safety Please be careful when handling OLEDs. The edges of the OLED panels may be sharp and can chip or break. In the unlikely event that an OLED fails, the temperature may rise locally to high levels. To avoid this the OLED should be turned off immediately. Disposal OLEDs should be disposed of according to local legislation

21 21 Logistical data Specification item Value Product name OLED Panel Brite 3 FL300 ww Level 1 Order code LPB3300S1WWL101 Pieces per box 20 Specification item Value Product name OLED Panel Brite 3 FL300 ww Level 1.5 Order code LPB3300S1WWL105 Pieces per box 20 Specification item Value Product name OLED Panel Brite 3 FL300 ww Level 2 Order code LPB3300S1WWL201 Pieces per box 20 Contact: OLEDWorks LLC 1645 Lyell Avenue, Suite 140 Rochester, NY 14606, USA OLEDWorks GmbH Philipsstr. 8, Aachen, Germany OWinfo@oledworks.com For more information visit: OLEDWorks LLC All rights reserved. Correct as of July 2018.