GB-ER series. Direct connection to LH70/71 series
|
|
|
- Milo Hensley
- 5 years ago
- Views:
Transcription
1 GB-ER series Direct connection to LH70/71 series 21/12/2007
2 Product comparison GB-A series Cable length : 3m, 5m, 10m Waterproof connector CH01 Multi-gap head PM output Up/Down output GB-ER series Cable length : Standard 3m only, Extension cable 2m, 7m Waterproof connector ASIC inside MR head w/ ref. SIN/COS A/B differential output
3 System configuration Scale unit : SR138R series Connection cable : CH04-03C Extension cable : CE10 series SMSJ will prepare 2m and 7m.
4 SR138R series Dimensions is same as GB-A Additional mounting hole 0.5m : 0.2m longer than GB-A It will be change to 0.3m as same as GB- A in near feature.
5 CH04 Series Status lamp Green : Normal Red : Error (Over speed, Cable disconnection, Defect signal ) Tapping hole for mounting Interpolator inside
6 Product specification comparison (Difference between GB-A and GB-ER) Item GB-A GB-ER Note Output signal Up/down single-end TTL A/B/Z TTL Line driver Added on reference point. Output connector (CH cable) SONY Original I/F box (CH01 cable) I/F unit with D-sub 9 pin (CH04 cable) Output connector (From head cable) JAE Circular waterproof type Male N JB1DB 10PL2 JAE Circular waterproof type Male N JB1DB 10PL2 Same connector but No compatible signal Mounting pattern of the Head Two sides (Top and Bottom) Three sides (Top, Bottom and Side) Cable output direction change Yes (It is changeable by customer.) No (Another side direction is available as special model) Inside of the head is glued in order to against coolant or water. Included cable (CH01 series) ML:50 to 850 : 3m ML: 950 to 1850 : 5m ML:2050,2200 : 10m (CH04 series) ML:50 to 2200 :3m Cable combination Necessary Necessary Use extension cable for long scale Model name :CE10. Head cable length 0.3m 0.5m. Reference point No Yes (Center one point) Can be ordered any one position as special model. Display LH51, LH52 LH70,LH71 Direct connect to.. Power consumption No general information 200mA(120ohm termination) Power supply No general information(+5v, -5V) +5V ±5% *Other specifications are same as GB-A scale.
7 General specifications Item GB-005ER to 020ER Measuring length : ML (mm) 50,100,150,200 Overall length (mm) Max. travel length (mm) GB-025ER to 085ER Resolution (µm) 0.5 Min. phase difference (ns) 200 Mounting parallelism (mm) ±0.1 Operation temperature ( C) 0 to 40 GB-095ER to 185ER 950,1050,1250,140 0,1600,1850 Cable length (m) SR138R Head cable : 0.5 CH04 Standard : 3 (Can be extend up to 30 / Extension cable : CE10) Output signal Power consumption (ma) A/B/Z Differential line driver (DS34C87) Power supply DC +5 ±5% Output connector Max. response speed (m/min) Inrush current (A) ML+104 ML ,300,350,400,450,500,550,600,650,750,850 ML+120 ML+30 Center foot plate No : ML=50 to 950 / Yes : ML=1050 to 2200 Accuracy (at 20 C) (µm) Reference point 5+5ML/1000 Thermal expansion coefficient(/ C) (11 ±1) x 10-6 IP glade One center location in measuring length Storage temperature ( C) -10 to 50 IP65 (Scale part) / IP30 (Interface unit part) D-sub 9 pin male (Inch screw for fixing) 60 (Scale signal and Reference point signal) Max. 200 (at 120 ohm termination) GB-205ER to 220ER 2050,2200
8 Technical item comparison Item GB-A GB-ER Note Scale Rod type scale Rod type scale Same material using. Ø 2mm 200µm signal pitch Clamp : Spherical surface Ø 2mm 200µm signal pitch. Detection principle is same as SD608-RA. Head Multi-gap head MR elements (Incremental and Reference point) Reference point None On the scale rod Inside Slider PWB for cable connection Analog circuit inside Interpolation circuit Analog circuit (PM signal) With interpolation IC Analog circuit (SIN/COS) with interpolation ASIC Interface box of the cable end Cable PVC 6 wire PVC 10 wire GB-ER : 10 wire cable Head cable length 0.3m 0.5m
9 Connection Cables with LH50 series Scale Head/Cable Adapter DRO GB-A Accessory (CH01 is included.) SR128 CH01- C SR127 LH51 LH52 SR-801 MSS-101 CE07- C SZ51-MS01 LH54-3 LY51 LY52 SR118 CE05- C SL110 PL20B- SL130 SJ700
10 Connection Cables with LH70 series Scale Head/Cable Adapter DRO GB-ER Accessory (CH04 is included.) SR138 CH04- C SR127 Discontinue LH70 LH71 SR-801 MSS-101 CE07- C SZ51-MS01 LY71 LY72 SR118 CE05- C SL110 PL20B- SL130 SJ700
11 Connection Cables with LH70 series Scale Head/Cable Adapter DRO GB-A Accessory SR128 CH01- C SR127 LH70 SR-801 CE07- C SZ51-MS01 LH71 MSS-101 LY71 LY72 SR118 CE05- C SL110 PL20B- SL130 SJ700
12 Connection Cables with LH50 series Scale Head/Cable Adapter DRO GB-ER Accessory SZ** SR138 CH04- C Not decided yet SR127 CH01- C LH51 LH52 SR-801 CE07- C SZ51-MS01 LH54-3 MSS-101 LY51 LY52 SR118 CE05- C SL110 PL20B- SL130 SJ700 SZ51-AB01
MAGNESCALE. digital magnetic scale. Series GB-ER. Key-Features:
MAGNESCALE digital magnetic scale Series GB-ER Key-Features: Content: Technical Data Technical Drawing Displays Order Code...2...2...4...5 - available measurement ranges: 50 to 2200 mm - Resolution up
Digital Readout Systems
Digital Readout Systems Magnescale Tel: +49 711 5858-777 E-Mail: smse-mp@eu.sony.com www.sonymanufacturing.com Reliable measuring systems higher quality and increased profit Sony magnetic scales fulfil
Magnetic Sensor - Incremental EHP
small design: 12 x 13 x 35 mm stainless steel case resolution up to 0,5 μm; hysteresis ± 1μm pole pitch:1; 2 mm output signal: Digital (TTL-RS422) or analog (1 Vpp) direct connection to control / display
Magnescale Co., Ltd. Digital Readout General Catalog. Ihr Fachhandelspartner:
Digital Readout General Catalog Ihr Fachhandelspartner: GeBoTech GmbH Industriestaße 24 778 Bühl Tel. 7223/9249-3 Fax. 7223/9249-9 www.gebotech.de info(at)gebotech.de Magnescale Co., Ltd. Shinagawa Intercity
ABS AT1100 Series. Assembly Type ABS AT Series Absolute Scale Unit (Standard Type) ABS AT Effective length Interface specifications
Assembly Type ABS AT Series (Standard Type) (esolution 0.05μm Specification) Features This series has adopted a new structure not easily subject to infiltration of coolant and a dust-proof rubber highly
Linear Probe Encoder Page 1 of 7. Description. Features
Page 1 of 7 Description The PE series linear plunger-style optical encoder has a machined aluminum enclosure. The PE provides either single-ended or differential quadrature encoder output in a convenient
Index. Index. 1.0 Introduction...2 This Manual Operation Finger Lift Cable Lift Pneumatic Operation...
Li nearenc oder s wi t httlout put Us ermanual Index 1.0 Introduction..........................2 This Manual...........................2 2.0 Safety Summary......................3 Terms in this Manual....................3
MAGNETIC TAPE. Series MB. incremental scale. Key-Features:
MAGNETIC TAPE incremental scale Series MB Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...3 Installation Instruction...3 Digital Displays...4 Order Code...5 - Available
ENC - LKE51 - L I B
ENC-LKE51 Linear Magnetic Encoder FEATURES DESCRIPTION LKE51 ORDERING INFORMATION Resolutions: 5, 10, 25, and 50μm Linear Travel Speed: Up to 16m/s Standard Sensor for Linear and Rotary Axis Gap Clearance
F250. Advanced algorithm enables ultra high speed and maximum flexibility. High-performance Vision Sensor. Features
High-performance Vision Sensor Advanced algorithm enables ultra high speed and maximum flexibility Features Inspection and positioning that was difficult with previous vision sensors is now surprisingly
Product Information. LS 1679 Incremental Linear Encoder with Integrated Roller Guide
Product Information LS 1679 Incremental Linear Encoder with Integrated Roller Guide February 2007 LS 1679 Incremental linear encoder for measuring steps to 5 µm or 1 µm Integrated wear-free roller guide
Product Information. LIC 4113 LIC 4193 Absolute Exposed Linear Encoders
Product Information LIC 4113 LIC 4193 Absolute Exposed Linear Encoders November 2016 LIC 4113, LIC 4193 Absolute linear encoder for measuring lengths up to 3 m Measuring steps to 0.001 µm Measuring standard
CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions
CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance
Gurley Models LA18, LA20, LA25, High Resolution - Industrial Ruggedness
Gurley Models LA18, LA20, LA25, and LA35 Absolute Linear Encoders Motion Type: Linear Usage Grade: Industrial Output: absolute Max Resolution: 0.5 to 8µm High Resolution - Industrial Ruggedness ingenuity@work
EZ Encoder : Optical Incremental
1. Introduction The EZ25 Encoder is a 2.5 incremental optical encoder, designed for optical shaft encoder motion control and precision sensor systems. Our ET7272 available models are short circuit proof
Material: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
Material: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
ABS ST700 Compact Type Series
Separate Type ABS ST Series (High environmental resistance type) ABS ST700 Compact Type Series Features Scale base type Absolute measurement with separate type scales Non-contact detection is optimal for
EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features
Description Page 1 of 8 The EM1 is a transmissive optical encoder module. This module is designed to detect rotary or linear position when used together with a codewheel or linear strip. The EM1 consists
ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:
ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental
Absolute Encoders Multiturn
The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft
part numbers 5 VDC ±5% 5 VDC ±5% 35 ma 30 ma RS 422 3,2 MHz < 4 VDC 160 khz RS 422
Magnetic sensors for rotary applications MDFK 08, 2 channel features competitively priced angular measurement solution using or magnetic rotor 2 channel version channel A/B 90 shifted 8-/16-fold interpolation
ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:
ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental
SERIES x5. Nickel-plated brass Connection 1) PUR cable type 1 Degree of protection. IP 67 Mounting. Embeddable Max. switching frequency
1 Size SERIES 400 x SERIES x Operating distance mm 0.8 0.8 1. Housing material Connection 1) PUR cable type 1 PUR cable type 1 / Connector S8 PUR cable type 1 Degree of protection Mounting Max. switching
RK-2 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD. Main characteristics
RK-2 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD (ANALOG OR START/STOP OUTPUT) Main characteristics Absolute transducer Strokes from 50 to 4000mm (RK-2- -N/E/S) Digital output
Product Information. EIB 700 Series External Interface Box
Product Information EIB 700 Series External Interface Box June 2013 EIB 700 Series The EIB 700 units are external interface boxes for precise position measurement. They are ideal for inspection stations
E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm
Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.
Material: Weight: IP Rating: Cable: Connector:
Automation / Mini Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 6 mm Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution: Supply Voltage:
EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features
Description Page 1 of 8 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear
EM1. Transmissive Optical Encoder Module Page 1 of 9. Description. Features
Description Page 1 of 9 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear
Linear encoders without bearings incremental System for linear motion feedback
Features Robust magnetic sensing method Output signals A 90 B with index signal Output circuits: HTL/push-pull and TTL/RS422 Resolution up to 5 µm (4-times evaluation) Non-contact, wear-free sensing system
Absolute encoders multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a maximum resolution
Fiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements
NO: PH-165 PRODUCT: E3S-X3, E3X-NL, E3X-NM DATE: August 2012 TYPE: Discontinuation Update Fiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements Affected
EZ Encoder : Optical Incremental (P Series)
1. Introduction Our EZ Encoders effectively eliminate multiple encoder part numbers by bringing intelligence and security to the design. A four-digit LED display with two push-buttons enables the user
Incremental Hollow Shaft Encoder
www.scancon.dk Incremental Hollow Shaft Encoder RMHF Introduction Mini hollow shaft encoder (blind end) mm diameter - up to 00 pulses/turn Up to 0000 counts Std. IP ( option; Ribbon cable +IDC connector
DIN EUROCARD CONNECTORS
DIN 41612 EUROCARD CONNECTORS 2230 SERIES SERIES. Vertical Female Type Half B Connectors. PCB Solder 4mm Wrap post tail length 13mm Wrap post tail length 17mm Soldar cable 16 a 2230 T061 2230 T063 2230
case 5 temperature sensor cosine sensor sine sensor ground + 5V phase 2- phase 2+ phase 1- phase 1+
Motor Cables Accessories Motor Cables Extension cables tailo for use with Norgren NP Linear Motors are available in two different versions; standard and high flex for the use in trailing chains or cable
LVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD Hydraulic Series. Key-Features:
HM 1808 LVDT Inductive Position Transducer - Hydraulic Series SM-HYD Hydraulic Series Key-Features: Content: - Screw flange M18x1,5 / M30x1,5 or plug-in flange Ø18 - Pressure up to 400 bar - Measurement
MODEL ED32i TTL LINEAR ENCODER
Reliable non-contact measurement Can be used for rotary as well as linear measurements Differential 5V TTL A/B-Quadrature output Error detection like out of range or missing scale Programmable reference
STBART0200K standard analog input kit STB - 2 I - 15 bits + sign
Product data sheet Characteristics STBART0200K standard analog input kit STB - 2 I - 15 bits + sign Main Range of product Product or component type Kit composition Analogue input type Analogue input number
Technical data. General specifications. Indicators/operating means
Model Number Single head system Features Sensor head bidirectional and rotatable Function indicators visible from all directions Quick mounting bracket Selectable sound lobe width Programmable Diagrams
Incremental Hollow Shaft Encoder
www.scancon.dk Incremental Hollow Shaft Encoder SCH32B Introduction Mini hollow through shaft encoder Std. IP 65 Thermal shutdown at 155 C Strong compact electronics Based on 2 precision ball bearings,
Displays Open Frame Monitor Model Number: AND-TFT-150Bxx
Displays 15.0 Open Frame Monitor Model Number: AND-TFT-150Bxx The AND-TFT-150Bxx 15.0 Open Frame Monitor series are rugged, high performance Industrial LCD Monitors, designed for commercial and industrial
Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.
Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous
Incremental angle encoders based on the inductive AMOSIN Measuring Principle
Incremental angle encoders based on the inductive MOSIN Measuring Principle Product information ugust 2016 WMK2010 series Composed of K WMK2010 and measuring flange or measuring ring Grating period 1000µm
Smart-Encoder : Optical Incremental
1. Introduction The Smart-Encoder effectively eliminates multiple encoder part numbers by bringing intelligence and security to its design. In seconds, a four-digit LED display with two push-buttons enables
AD16-16U(PCI)EV. Features. High-Speed & Resolution Analog Input Board for PCI AD16-16U(PCI)EV 1. Ver.1.02
High-Speed & Resolution Analog Input Board for PCI * Specifications, color and design of the products are subject to change without notice. This product is PCI-compliant interface boards that convert analog
PROXIMITY SWITCHES INDUCTIVE TUBULAR SENSOR M30 SERIES HIGHLIGHTS APPLICATIONS
INDUCTIVE TUBULAR SENSOR M30 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
RLC2IC component magnetic encoder with magnetic rings MR050C and MR047B
Issue 1, 29 th September 2014 RLC2IC component magnetic encoder with magnetic rings MR050C and MR047B RLC is a PCB level encoder for rotary measurements. With its compact design it is suitable for integration
Clamps, mounting plate EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles
PRDS2 Magnetic Angle Encoder with Incremental Output Magnetic angle encoder 0-360 degrees in a flat housing with 36 mm dia. Measurement range 0 to 360 Protection class IP67 / IP69K Incremental encoder
Connectors, self-assembly
Sub-D connection Connectors, self-assembly 9 pin Order no. Male connector with cable outlet solder contacts, for cable ø.5....6 mm [0.1... 0. ].0000.51A.0000 () () () (5) Housing: ABS, metallized, IP0
SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR
SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR Description SE22HR is a very high performance hollow shaft encoder; a high resolution is achievable in a small space with a good performance/price
Photoelectric Sensors E3F2
Photoelectric Sensors E3F2 Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Switch M18 DIN-sized cylindrical housing Housing materials: plastic, nickel
AD12-16U(PCI)EV. Features. High-Speed Analog Input Board for PCI AD12-16U(PCI)EV 1. Ver.1.01
High-Speed Analog Input Board for PCI AD2-6U(PCI)EV * s, color and design of the products are subject to change without notice. This product is PCI-compliant interface boards that convert analog input
LED control gear Compact fixed output
Driver LC 40W 900mA fixc SR SNC ESSENCE series Product description Independent fixed output LED Driver Constant current LED Driver Output current 900 ma Max. output power 39 W Nominal life-time up to 50,000
ELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE
NorthStar brand SERIES HD35R Heavy Duty Encoder Key Features Phased Array Sensor for Reliable Signal Output Rugged Design with Wide-Spaced Oversized Bearings Unbreakable Code Disc up to 5000PPR Improved
Analog Input Module HART Ex n Inputs, 8 Channels Series 9461/15
> 8 channels for 2-wire HART transmitters > Inputs for Ex nl, Ex na and Nonincendive > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit >
ZN-PD. Smallest Air Particle Sensor in the Industry for In-line Measurement. Air Particle Sensor. Features
Air Particle Sensor Smallest Air Particle Sensor in the Industry for In-line Measurement Suitable for continuous measurement. With Realtime Clean Air Monitor. Be sure to read Safety Precautions on page
IMPAC Infrared Thermometers
IMPAC Infrared Thermometers focusable optics for non-contact temperature measurements on metals, ceramics, graphite etc. between 300 and 3300 C IS 140 IGA 140 IS 140-PB IGA 140-PB Short response times
MICROMASTER Encoder Module
MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified
APPLICATIONS. Automatic warehouse. Trasportation lines
INDUCTIVE TUBULAR SENSOR M12 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
GV 460 / GV 461 Impulse Splitters for Incremental Encoders with Potential Separation between Input and Outputs
control motion interface GV 460 / GV 461 Impulse Splitters for Incremental Encoders with Potential Separation between Input and Outputs GV 480 / GV 481 Impulse Splitters for Incremental Encoders with all-around
FLAT DISPLAY TECHNOLOGY
15.0 Open Frame Monitor Model Number: LOF1506xx This product is RoHS compliant SPEC No.: SAS-1008002 Version: 0.0 Issue Date: September 6, 2010 1. Introduction: 1.1 About the Product The LOF1506xx 15.0
Product model and standard
Preface Thank you for purchasing the Ikan Blitz 400 HD Wireless Video System. This system features uncompressed high definition video with zero delay. Before using the product, please read this user s
Optical ENCODERS for LINEAR and ROTARY Applications PRODUCT RANGE SIMPLY PRECISE
Optical ENCODERS for LINEAR and ROTARY Applications WWW.NUMERIKJENA.DE 2016 PRODUCT RANGE SIMPLY PRECISE NOTES 2 3 Index 1. Company 4 2. Product Overview 6 2.1 Complete Product Range 6 2.2 Technical Comparison
Material: Weight: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-H-SR EN 60079 Electrical Specifications Code: Resolution: Supply Voltage: Voltage: Current: Incremental 1 to 10,000 ppr (pulses per revolution) 4.5 Vdc min. to 30 Vdc
LMP 305. Slimline Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.
Slimline Probe Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO Nominal pressure from 0... mh 2 O up to 0... 250 mh 2 O Output signals 2-wire: 4... 20 ma
Photoelectrics Through-beam Type PA18C.T..., DC
Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:
Online data sheet SGS4-S108P3PS2W03 SLG SWITCHING AUTOMATION LIGHT GRIDS
Online data sheet SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS A B C D E F H I J K L N O P R S T Detailed technical data Features Technology Ordering information
USER S Manual NGLT104WPD NGLT150WPD LCD TV / Monitor (IP67 Grade)
USER S Manual NGLT104WPD NGLT150WPD LCD TV / Monitor (IP67 Grade) This Manual is revisable without further notice Contents CONTENTS ------------------------------------------------------------------- 1
LED Driver Compact dimming
Driver CA 15W 180-350mA flexc PH-C SR ADV ADVACED series Product description Dimmable constant current ED Driver (SEV) Independent ED Driver with cable clamps Selectable output current between 180, 250
45 mm : all channels. Output indicator Yellow LED System status indicator Light source Infrared (880 nm) Opening angle +/ 4 Emission angle +/ 5
SPACEGUARD SERIES Description 1-12 metre sensing range 16 to 56 parallel scanning beams Active height of 0 mm to 2520 mm Detector length of 1928 mm to 2648 mm 3 different channel placement models Cable
Type SCH94FO. Type SCH94FO. Description
Type SCH94FO Hollow Shaft Fiber Optic Encoder - Ø 94 mm Dual Output Option (Digital & Fiber Optic) Fiber Optic Transmission up to 2,000 meters (~ 1.25 miles) No Degradation of Encoder Signal from Electrical
IPC-DT/H20X(PC)T IPC-DT/M20V(PC)T, IPC-DT/L20S(PC)T, IPC-DT/H20X(PC)T. Option. Features. Ver.1.10
Panel-Mount with Analog RGB FLAT PANEL DISPLAY IPC-DT/M20V(PC)T 10.-inch TFT color LCD (60 x80 dots ) IPC-DT/L20S(PC)T 12.1-inch TFT color LCD (800 x600 dots ) IPC-DT/H20X(PC)T 1-inch TFT color LCD (102
AS09..S 3-pole Contactors - Spring Terminals
4 kw 5 hp AS09..S 3-pole Contactors - Spring AC Operated Description - 3-pole contactors with spring terminals, - N.C. or N.O. built-in auxiliary contact, - Rail-mounted, no tools required, - Additional
DATA SHEET Panorama Rudder Indicator, TRI-2
DATA SHEET Panorama Rudder Indicator, TRI-2 Class 1 accuracy on CAN version Readable from up to 5 metres Single and dual CAN or analogue interface LED illumination DEIF A/S Frisenborgvej 33 DK-7800 Skive
Chip3 Inline Ultraslim RGB Multi Pixel
Key Features Slim Enclosure Overmolded Electronics Full-color RGB pixels Triple Brightness Center Mounting Hole 24 Dust- and Water Resistant 24 Month Warranty Many Applications RoHS Certified and Built
HN Connectors. Automatic Connector. Introduction. Contents. 631/ FAX 631/
Connectors Introduction 2004 Automatic Connector. All rights reserved. pdf 1.0 4-13-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable
Revision 1.2d
Specifications subject to change without notice 0 of 16 Universal Encoder Checker Universal Encoder Checker...1 Description...2 Components...2 Encoder Checker and Adapter Connections...2 Warning: High
LOW-COST, 3 1/2 DIGIT DC VOLTMETERS MODEL 201A & 201AN OPTION 201AN-AC / 301AN
LOW-COST, 3 1/2 DIGIT DC VOLTMETERS MODEL 201A & 201AN OPTION 201AN-AC / 301AN STANDARD FEATURES ±1,999-count display span ±200 mv to ±200 Vdc ranges True-differential input with 80 db CMR 3-wire ratio
Series SM ø12 mm. Inductive Position Transducer. ranges mm. linearity 0,2/0,3% ø12 mm, clamp-ø8 mm h6. out: AC, V, V, 4...
LVDT Inductive Position Transducer Series SM ø12 mm ranges 2...200 mm linearity 0,2/0,3% ø12 mm, clamp-ø8 mm h6 out: AC, 0...10 V, 0...5 V, 4...20 ma with external or integrated cable electronics repeatability
Technical data. General specifications. 60 ma Power consumption P 0. 1 W Time delay before availability t v. 120 ms Interface. Protocol IO-Link V1.
Model Number Single head system Features IO-link interface for service and process data Programmable via DTM with PACTWARE programmable switch outputs Selectable sound lobe width Synchronization options
SPECIFICATION SFW056XU1-AV
Version:2.0 Customer Approved Customer SPECIFICATION SFW056XU1-AV Date By Sunful s Confirmation Approved By Prepared By Date: 2005.1.10-1 - CONTENTS General Description..3 Features.3 Applications 3 Driving
BASIC PH METER BASIC PH METER KIT
BASIC PH METER 840087 BASIC PH METER KIT 840088 Instruction Manual 2 TABLE OF CONTENTS I. INTRODUCTION... 3 II. PANEL DESCRIPTION... 4 III. OPERATING INSTRUCTIONS A. PH CALIBRATION PROCEDURE... 5 B. MEASUREMENT
Product Information. RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads
Product Information RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads May 2014 RIQ 425 Absolute rotary encoders Synchro flange 01C Solid shaft for separate shaft
W100L: Laser Sensor in Mini- Format
Product group W00 Laser Photoelectric proximity switch energ. Photoelectric reflex switch W00L: Laser Sensor in ini- Format Through-beam photoelectric switch Where applications demand it, the sensor can
FOM-9010, FOM-9011 and FOM-9012
Control and Alarm Voltage sense, open collector, or contact inputs Features: FOM-00: Voltage Sense, Open Collector, or Dry Contact Inputs. State Detection for TIA-, TIA-, and TTL Signals. FOM-0: SPDT Form
HDMI Standard Digital Interface Connector. DC1 Series
COMPONENTS PRODUCT INFORMATION NEW HDMI Standard Digital Interface Connector DC1 Series CONNECTOR MB-0121-2 August 2008 RoHS Compliant Recently, the market for digital consumer devices such as LCD TVs,
SERIES 400 SERIES 620
x 0. 0... PUR cable type,000 Hz SERIES 00 SERIES 0 0,000 Hz Table Diagram ---.... 9 VDC /. ma** PUR cable type / Connector S,000 Hz 0,000 Hz Table Diagram ---.... 9 VDC /. ma** PUR cable type,000 Hz x
Ocean Sensor Systems, Inc. Wave Staff, OSSI F, Water Level Sensor With 0-5V, RS232 & Alarm Outputs, 1 to 20 Meter Staff
Ocean Sensor Systems, Inc. Wave Staff, OSSI-010-002F, Water Level Sensor With 0-5V, RS232 & Alarm Outputs, 1 to 20 Meter Staff General Description The OSSI-010-002E Wave Staff is a water level sensor that
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
48x24. Options ORDER NUMBER OF TYPE PFL B
Frequency metering (0.01 Hz 9999 Hz) with 2 setpoints Free scalable indication and setpoints from 0 up to +9999 Standard: min/max memory - option: analogue output Allow to be placed side by side in grid
CONDITIONER TERMINAL BLOCK 8 ISOLATED ANALOG INPUTS STB 582
CONDITIONER TERMINAL BLOCK 8 ISOLATED ANALOG INPUTS STB 582 Eight 3-port isolated analog inputs INPUTS / OUTPUTS / POWER SUPPLY Protected inputs Levels from ± 50mV FS to ± 40V FS Low-pass 2 nd order filter
Analog Input Module HART Ex i / I.S. Inputs, 8 Channels Type 9461/
> 8 channels for 2-wire HART transmitters > Intrinsically safe inputs Ex ia IIC > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit > Module
IS 140 IGA 140 IS 140-PB IGA 140-PB IS 140-PN IGA 140-PN IS 140-ET IGA 140-ET
IMPAC Infrared Temperature Sensors focusable optics for non-contact temperature measurements on metals, ceramics, graphite etc. between 220 and 3500 C IS 140 IGA 140 IS 140-PB IGA 140-PB IS 140-PN IGA
Cyclo Series. user manual. MartinArchitectural
Cyclo Series user manual MartinArchitectural Measurements are in millimeters 63 Cyclo 02 88 Cyclo 03 1000 81 1190 88 Cyclo 04 98 88 2002 Martin Professional A/S, Denmark. All rights reserved. No part of
MODEL LDL-C Miniature Non-Contacting Linear Encoder Kit
MODEL LDL-C Miniature Non-Contacting Linear Encoder Kit Differential RS422 line driver output. Two count channels ( A & B ) wave in quadrature with compliments and index Low cost non-contacting linear
MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT)
MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT) TECHNICAL DATA Measurement taken Position read sampling time (typical) Shock test DIN IEC68T2-27 Vibrations DIN
Bimetal Temperature Switch
Phone: +44 19 635533 Fax: +44 19 635262 Data sheet 608301 Page 1/8 Bimetal Temperature Switch Special features Electromechanical temperature switch with a fixed switching temperature Protection type IP52,
Linear encoders series 300
Dimension Linear encoders series 300 Characteristics Cross section The maximum error The maximum speed The reference point Protection Resolution Output 70-1020 (mm) 15x24 (mm) ±3/±5/±10 (μm) (20 C/68 F)