SPECIFICATIONS MODEL NO. FN070MY03 LCD MODULE, 800(RGB) * 480 PIXELS,WITH CTP TYPE. Preliminary Specification Final Specification
|
|
- Marjory Harvey
- 5 years ago
- Views:
Transcription
1 REV 00 SPECIFICATIONS MODEL NO. FN070MY03 TYPE LCD MODULE, 800(RGB) * 480 PIXELS,WITH CTP Preliminary Specification Final Specification FANNAL CUSTOMER PREPARED CHECKED APPROVED APPROVED FANNAL ELECTRONICS CO., LTD
2 Page:2 /20 Spec No:FN070MY03 RECORDS OF REVISION REV. DATE Page DESCRIPTION OF CHANGES First Release
3 Page:3 /20 CONTENT 1. GENERAL SPECIFICATION MECHANICAL DRAWING INTERFACE ASSIGNMENT ELECTRICAL SPECIFICATION POWER SUPPLY DC CHARACTER AC CHARACTER TIMING DIAGRAM OF INTERFACE SIGNAL BACKLIGHT SPECIFICATION OPTICAL CHARACTERISTICS TOUCH PANEL SPECIFICATION RELIABILITY TESTS PACKAGE DRAWING PRECAUTIONS HANDLING STORAGE SAFETY LIMITED WARRANTY RETURNING LCM UNDER WARRANTY TERMS AND CONDITIONS...20
4 Page:4 /20 1. GENERAL SPECIFICATION 1.1. Description The FM070MY03 is a color active matrix Thin Film Transistor (TFT) Liquid Crystal Display (LCD) that uses amorphous silicon (a-si) TFT as a switching device. This model is composed of a single 7.0 (16:9) inches transmissive type main TFT-LCD panel. The resolution of the panel is 800(RGB) x 480 pixels and can display up to 16M color Feature -TM type for main TFT-LCD panel -24bits RGB interface -One backlight with 24 white LEDs 1.3. Application -Display terminals for digital product 1.4. General Specification No. Item Specification Unit Remark 1 LCD Size 7(digital) inch - 2 Panel Type a-si TFT active matrix Resolution 800 (RGB) x 480 pixel - 4 Display Mode Normally white,transmissive Display Number of 16M Viewing Direction 6 o clock peack CR (12o clock good view) - Note 7 Contrast Ratio 500(TYP) Luminance 360(TYP) cd/m 2-9 Module Size 164.9(W ) x 100.0(H) x 6.93(D) mm Note 10 Active Area (H) x 86.42(V) mm Note 11 Pixel Pitch mm - 12 Weight TBD g - 13 Driver IC HX8264-D05&HX8664-B Light Source 24 LEDs White Interface RGB 24bit Operating Temperature -20~70-18 Storage Temperature -30~80 - Note: Please refer to the mechanical drawing.
5 Page:5 /20 2. MECHANICAL DRAWING 0.3±0.05 *5.5±0.1TFT FN070MY03 FANNAL ELECTRONICS CO.,LTD
6 Page:6 /20 3. INTERFACE ASSIGNMENT PIN NO. SYMBOL I/O FUNCTION DESCRIPTIONS 1 LED-A P Power for LED backlight (Anode) 2 LED-A P Power for LED backlight (Anode) 3 LED-K P Power for LED backlight (Cathode) 4 LED-K P Power for LED backlight (Cathode) 5 GND P Power Ground 6 VCOM P TFT Common Voltage input 7 DVDD P Power for Digital Circuit 8 MODE I DE/SYNC mode select 9 DE I Data enable signal 10 VS I Vertical sync input. 11 HS I Horizontal sync input. 12~19 B7~B0 I Blue Data Input 20~27 G7~G0 I Green Data Input 28~35 R7~R0 I Red Data Input 36 GND P Power Ground 37 DCLK I Sample Clock Input 38 GND P Power Ground 39 L/R I Left / right selection 40 U/D I Up/down selection 41 VGH P Positive Power for TFT Gate ON 42 VGL P Negative Power for TFT Gate OFF 43 AVDD P Power for Analog Circuit 44 RESET I Global reset pin. 45 NC / No connection 46 VCOM P TFT Common Voltage input 47 DITHB I Dithering function 48 GND P Power Ground 49 NC / No connection 50 NC / No connection I: input, O: output, P: Power Note 1: DE/SYNC mode select. Normally pull high. When select DE mode, MODE= 1, VS and HS must pull high. When select SYNC mode, MODE= 0, DE must be grounded. Note 2: When input 18 bits RGB data, the two low bits of R,G and B data must begrounded. Note 3: Data shall be latched at the falling edge of DCLK. Note 4: Selection of scanning mode
7 Page:7 /20 4. ELECTRICAL SPECIFICATION 4.1. POWER SUPPLY Item Symbol Min. Typ. Max. Unit Note Vcc V Supply Voltage VGH V VGL V AVDD V VCOM VCom V Note 1 Note 1: Please adjust VCOM to make the flicker level be minimum DC Characteristics Symb Item Min. Typ. Max. Unit Note ol Input signal Voltage ViH 0.7Vcc - Vcc V Note(1) ViL Vcc V Current of power IDD ma supply IADD ma Note (1): HSYNC, VSYNC, DE, Digital Data 4.3. AC Characteristics
8 Page:8 / TIMING DIAGRAM OF INTERFACE SIGNAL
9 Page:9 /20
10 Page:10 /20
11 Page:11 / BACKLIGHT SPECIFICATION 5. OPTICAL CHARACTERISTICS (T a =+25, VCC=+3.3V, I B =180mA) B Item Symbol Condition Values Unit Remark Min. Typ. Max. Left θ L Viewing Right θ R CR 10 Angle Range Top Ф T degree Note 1,2 Botto Ф BB Normal Response Time T on +T off θ=ф= ms Note 2,3 Contrast Ratio CR Normal θ=ф= Note 2,4 Luminance L Normal θ=ф= cd/m 2 Note 2,5 White Wx Wy Rx Color Red Ry Normal Chromaticity Gx θ=ф= (CIE1931) Green Gy Note 2,4 Blue Bx By Color Gamut NTSC CIE % - Luminance Uniformity Flicker U L Normal θ=ф=0 Normal θ=ф= % Note 2,7 Not visible - Note 9 Crosstalk Normal θ=ф=0 Not visible - Note 10
12 Page:12 /20 Note 1: Definition of viewing angle range Normal line θ=ф=0 θ B θ T 12 o clock direction Ф=90 θ L θ R Ф=180 Ф=0 Active Area LCD Panel Ф=270 6 o clock direction Fig. 1 Definition of viewing angle Fig. 2 Definition of viewing angle for display Note 2: Definition of optical measurement system
13 Page:13 /20 The optical characteristics should be measured in a dark room with ambient temperature T a =+25. The optical properties are measured at the center point of the LCD screen after 5 minutes operation. (Equipment: Photo detector TOPCON BM-5AS Field of view: 1 /Height: 500mm.) Photo detector Normal line θ=ф=0 500mm 12 o clock direction Ф=90 Ф=180 Ф=0 Active Area LCD Panel Ф=270 6 o clock direction Fig. 3 Optical measurement system setup Note 3: Definition of response time The response time is defined as the LCD optical switching time interval between White state and Black state. Rise time (T on ) is the time between photo detector output intensity changed from 90% to 10%, and fall time (T off ) is the time between photo detector output intensity changed from 10% to 90%. White (TFT OFF) Black (TFT ON) White (TFT OFF) (Relative value) Photo detector output 100% 90% 10% 0% T on T off Fig. 4 Definition of response time
14 Page:14 /20 Note 4: Definition of contrast ratio Note 5: Definition of luminance Measured at the center area of the panel when LCD panel is driven at white state. Note 6: Definition of color chromaticity (CIE1931) Color coordinates measured at the center point of LCD when panel is driven at White, Red, Green and Blue state respectively. Note 7: Definition of luminance uniformity To test for uniformity, the tested area is divided into 3 rows and 3 columns. The measurement spot is placed at the center of each circle as below. L Luminance Uniformity (U L ) = L min max L Active area length W----- Active area width W W/6 W/3 W/3 L L/3 L/3 L/6 Fig. 5 Definition of luminance uniformity L min : The measured minimum luminance of all measurement position. L max : The measured maximum luminance of all measurement position. Note 9: Definition of Flicker
15 Page:15 /20 Flicker is the pattern usually used to describe the visual sensation produced by a rapidly varying light intensity. There should be no visible flicker in normal direction of the display when the following figure are loaded. The figure is composed of interlaced black and white lines. Fig.6 Flicker checker pattern Note 10: Definition of crosstalk There should be no visible in normal direction of the display when the following figures are loaded. Fig.7 Crosstalk checker pattern
16 Page:16 /20 6. TOUCH PANEL SPECIFICATION 6.1. Feature -7" Projective capacitive touch panel -IC FocalTech FT5316 -True Multi-touch with up to 5 Points of Absolution X and Y Coordinates 6.2. General Specification No. Item Specification Unit Remark 1 CTP Size 7 inch - 2 Panel Type Glass Cover+Glass Sensor Resolution 800 x 480 pixel - 4 Module Size (W ) x 99.60(H) x 1.83(D) mm Note 1 5 Active Area (H) x 88.32(V) mm Note 1 6 Surface Hardness 6H Transparency 80%min - Note 2 8 Driver IC FT Interface I2C Support Points Rate Hz - 12 Power supply V - 13 Operating current Normal mode 7.2(Typ.) ma - Green mode 3(Typ.) ma - Sleep mode ma - 14 Operating Temperature -20~70-15 Storage Temperature -30~80-16 ESD Note1: Please refer to the mechanical drawing. Note2: Wave Length 550nm. Note3: Touch Panel Surface. Air ±8 KV Note3 Contact ±4 KV Note FPC PIN Assignment PIN NO. SYMBOL FUNCTION DESCRIPTIONS 1 VCC Analog power supply( v) 2 WAKE Wake signal 3 INT Interrupt signal(1.8v) 4 SCL I2C clock(1.8v) 5 SDA I2C data(1.8v) 6 GND Ground
17 Page:17 / Serial Interface FT5316 supports the I2C interfaces, which can be used by a host processor or other devices.the I2C is always configured in the Slave mode. The data transfer format is shown in Figure 2-4.
18 Page:18 / Electrical Specifications Absolute Maximum Ratings
19 Page:19 /20 7. RELIABILITY TESTS ITEM CONDITION CRITERION Operating Temperature Test Storage Temperature Test High Temp &High Humidity Thermal Shock Test Vibration Test Package Drop Test Electro Static Discharge High Temperature: +70±2 ºC,96hrs Low Temperature: -20±2 ºC, 96hrs High Temperature: +80 ±3ºC, 120hrs Low Temperature: -30±3ºC, 120hrs 50 ºC, 90RH, 96hrs -20 ºC (0.5 hrs) +70 ºC(0.5 hrs) 10 cycles Package Operating Time: 60 minutes exposure for each Y direction Sweep Frequency:10~55Hz (1 min) Amplitude: 1.5mm Speed:20m/s2 Height :1.0m (Weight 10kg); 60cm(Weight 10kg) 1 corner,3 edges,6 surfaces ± 2KV, Human Body Mode, 100pF/1500Ω ± 8KV, Air Mode, 100pF/1500Ω No defects in display and operational functions No defects in display and operational functions No defects in display and operational functions No defects in display and operational functions No defects in display and operational functions No defects in display and operational functions No defects in display and operational functions NOTE: 1) The samples must be free from defect before test, must be restored at room condition at least for 2 hours after reliability test before any inspection. 2) Before test the function of TP, the sample must be placed in room temperature for 24hrs after RA test. 8. PACKAGE DRAWING TBD 9. PRECAUTIONS 9.1. HANDLING Polarizer Cleaning, Petroleum ether (or N-hexane) is recommended for cleaning the front/rear polarizers and reflectors, acetone, toluene and ethanol are not allowed to avoid damaging the surface Body grounding, must wear Anti-ESD wrist strap while pick up LCDs FPC Soldering, less than 300 /3S, solder must be grounding on grounding bench If use electric Screwdriver to do assembly, screwdriver must be grounding.
20 Page:20 / STORAGE Keep in a sealed polyethylene bag Keep in a dark place Keep in temperature between 0 and 35. NOT allowed at 70 for more than 160 Hours, or at -20 for more than 48 Hrs SAFETY If liquid crystal leak out of a damaged glass cell, DO NOT put it in your mouth or touch eyes, if the liquid crystal touch your skin or clothes, please wash it off immediately using soap and water. Tel: FAX: Sales@fannal.com
SPECIFICATIONS MODEL NO. LCD MODULE, 800(RGB) * 480 PIXELS,WITH CTP TYPE. Preliminary Specification Final Specification VICTRONIX TECHNOLOLY LTD
REV 00 SPECIFICATIONS MODEL NO. TYPE VX-S99815-PT070WV LCD MODULE, 800(RGB) * 480 PIXELS,WITH CTP Preliminary Specification Final Specification VICTRONIX CUSTOMER PREPARED CHECKED APPROVED APPROVED VICTRONIX
More informationINNOLUX DISPLAY CORPORATION
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT065TN14 SPEC NO.: A065-14-TT-01 Date: 2010/02/02 Version: 01 Preliminary Specification Final Specification For Customer s Acceptance
More informationINNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT070TN92 V.1 SPEC NO.: A070-92-TT-12 Date: 2010/03/23 Version: 02 Preliminary Specification Final Specification For Customer
More informationLCD Module Product Specification
Website: www.displaytech.com.hk LCD Module Product Specification Product: DT070ATFT & DT070ATFT-TS 7.0'' TFT Display Module (800RGBx480DOTS) Contents in this document are subject to change without notice.
More informationTFT LCD Module Product Specification
TFT LCD Module Product Specification DT035BTFT-PTS1 3.5 (320(RGB) x 240 DOTS) TFT Module with Capacitive Touch Screen October 28, 2016 Remark: Contents in this document are subject to change without notice.
More informationINNOLUX DISPLAY CORPORATION SPECIFICATION. Customer: Model Name: AT070TN90 SPEC NO.: Date: 2010/03/22 Version: 02. Preliminary Specification
INNOLUX DISPLAY CORPORATION SPECIFICATION Customer: Model Name: AT070TN90 SPEC NO.: Date: 2010/03/22 Version: 02 Preliminary Specification Final Specification Remark 7DD FOG (FPC:47.51mm) For Customer
More informationSPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY
AZ DISPLAYS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY CUSTOMER APPROVAL PART NO. : ATM0500D7(AZ DISPLAYS) VER1.1 COMPANY APPROVAL CHOP CUSTOMER COMMENTS AZ DISPLAYS ENGINEERING APPROVAL DESIGNED BY CHECKED
More informationDEM N1 TMH-PW-N
Display Elektronik GmbH TFT MODULE DEM 480272N1 TMH-PW-N (C-TOUCH) 4,3 TFT + PCT Product Specification Ver.: 0 22.06.2018 Revision History VERSION DATE REVISED PAGE NO. Note 0 22.06.2018 First issue Version:
More informationCHIMEI INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: EJ050NA-01G Date: 2011/12/01 Version: 01 Preliminary Specification Final Specification For Customer s Acceptance Approved by Comment Approved
More informationCHIMEI INNOLUX DISPLAY CORPORATION
CHIMEI INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: EJ050NA-01G Date: 2012/11/30 Version: 01 Preliminary Specification Final Specification For Customer s Acceptance Approved
More informationCHIME INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
CHIME INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT070TN94 Date: 2010/11/03 Version: 02 Preliminary Specification Final Specification For Customer s Acceptance Approved
More informationTFT LCD Module Product Specification
TFT LCD Module Product Specification DT035BTFT 3.5 (320(RGB) x 240 DOTS) TFT Module November 25, 2015 Remark: Contents in this document are subject to change without notice. No part of this document may
More informationINNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT090TN12 SPEC NO.: A090-12-TT-03 Date: 2009/03/16 Version: 03 Preliminary Specification Final Specification For Customer s Acceptance
More informationLCD MODULE SPECIFICATION
TECHNOLOGY CO., LTD. LCD MODULE SPECIFICATION Model : MI0220IT-1 Revision Engineering Date Our Reference DOCUMENT REVISION HISTORY DOCUMENT REVISION DATE DESCRIPTION FROM TO A 2008.03.10 First Release.
More informationRECORD OF REVISION Revision Date Page Contents Editor 2013/03/15 -- New Release Emil 2013/03/19 3 Correct the interface description. Emil 2013/03/28 1
SPECIFICATIONS FOR LCD MODULE CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. AM-800600C4TMQW-A1H APPROVED BY DATE Approved For Specifications Approved For Specifications & Sample AMPIRE CO., LTD. 4F., No.116,
More informationCHIMEI INNOLUX DISPLAY CORPORATION
CHIMEI INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT080TN64 SPEC NO.: A080-64-TT-02 Date: 2010/10/15 Version: 01 Preliminary Specification Final Specification For Customer
More informationASI-T-3501NA5FN/D. Outline Dimension (W x H x D) 51.16x 86.45x2.0 mm Active Area x 75.6 mm. Transflective Normally black
Item Contents Unit Size 3.5 inch Resolution 480(RGB) x 800 / Interface RGB 24 bits / Technology type TFT active matrix / Pixel pitch 0.0945x0.0945 mm Pixel Configuration R.G.B. Vertical Stripe Outline
More information2.2 Application Multimedia products, instrument device, GPS, MID and other electronic products Etc. No. Item Specification Remark
2. General Specifications 2.1 Description is a Transmissive type color active matrix liqui d crystal display (LCD), which uses amorphous thin film transistor (TFT) as switching devices. This product is
More informationINNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT050TN33 V.1 SPEC NO.: A050-33-TT-11 Date: 2008/11/25 Version: 01 Preliminary Specification Final Specification For Customer
More informationT2432C13VR01 REV. B (3.5 DIGITAL TFT with LED BACKLIGHT) 1-Chip Solution
LCD MODULE (DEPARTMENT) SPECIFICATION T2432C13VR01 REV. B (3.5 DIGITAL TFT with LED BACKLIGHT) 1-Chip Solution CUSTOMER APPROVAL... STAMP AND SIGNATURE DATE: IMPORTANT NOTE: This document must be approved
More informationAZ DISPLAYS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY CUSTOMER APPROVAL AZ DISPLAYS ENGINEERING APPROVAL PART NO.: ATM0800D3 (AZ DISPLAYS) VER1.
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY CUSTOMER APPROVAL PART NO.: ATM0800D3 () VER1.0 APPROVAL COMPANY CHOP CUSTOMER COMMENTS ENGINEERING APPROVAL DESIGNED BY CHECKED BY APPROVED BY ATM0800D3() MODULE
More informationCHIMEI INNOLUX DISPLAY CORPORATION
DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT043TN20 Date: 2010/05/10 Version: 01 Preliminary Specification Final Specification Remark 4.3 FOG (FPC:44.05mm) For Customer s Acceptance
More informationLCD MODULE SPECIFICATION. Customer: Model Name: AT090TN10 SPEC NO.: A TT-32 Date: 2008/12/24 Version: 02
LCD MODULE SPECIFICATION Customer: Model Name: AT090TN10 SPEC NO.: A090-12-TT-32 Date: 2008/12/24 Version: 02 Preliminary Specification Final Specification For Customer s Acceptance Approved by Comment
More informationFORMIKE ELECTRONIC CO.,LTD
PRDUCT SPECIFICATON TFT LCD MODULE MODEL : KWH070KQ20-F03 Preliminary Specification Finally Specification CUSTOMER'S APPROVAL SIGNATURE: DATE: APPROVED PM PD PREPARED BY REVIEWD REVIEWD BY Kam / Stephen
More informationINNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT056TN52 V.3 SPEC NO.: A056-52-TT-31 Date: 2009/03/25 Version: 01 Preliminary Specification Final Specification For Customer
More informationK90DWN0-V1-F. Product. 9 inch Diagonal 800 x 480 x RGB Dots 16.7M colors TFT display With white LED backlight With resistive touch screen
PAGE 1 OF 14 K90DWN0-V1-F Product 9 inch Diagonal 800 x 480 x RGB Dots 16.7M colors TFT display With white LED backlight With resistive touch screen Kentec Electronics (Displays) Limited URL: http://www.kentecdisplay.com.hk
More informationSpecification Sheet. Mode: Transmissive Type, Negative mode, 3.97 LTPS LCD module 16.7M color. Checked by PM QA BU
Specification Sheet Customer Part No. Product type ZRoHS Remarks TVL-55806GD040J-LW-G-AAN Mode: Transmissive Type, Negative mode, 3.97 LTPS LCD module 16.7M color Non-compliance Compliance Preliminary
More informationSPECIFICATIONS. PG-95014(Ver.0) Customer Approved. Sales Sign QC Confirmed Checked By Designer. OKAYA Electric America, Inc.
OKAYA Electric America, Inc. SPECIFICATIONS DRAWING CODE SAMPLE CODE PG-95014(Ver.0) PH-06005-005 LMD-PE12864WRF-049-H-Q PS12032LRS-DGB-B01(Ver.0) PS320240T-004-I05 SE12864WRF-49-H-Q (This Code will be
More informationSpecification for Approval
Specification for Approval Customer: Model Name: Supplier Approval R&D Designed R&D Approved QC Approved Customer approval Peter Peng Jun YU DU AMSON ELECTRONICS CO.,LTD. Page 1 of 20 Revision Record REV
More informationVICTRONIX. Approval sheet. Prelimi nary Speci f icat ion. Final Specification. For Customer s Acceptance. Approved by Reviewed by Prepared by
Approval sheet Customer: Model name: Spec NO: Date: 2013.7.19 Version: 01 Prelimi nary Speci f icat ion Final Specification For Customer s Acceptance Approved by Content Approved by Reviewed by Prepared
More information5.0 inch TFT LCD SPECIFICATION
5.0 inch TFT LCD Without Touch Panel SPECIFICATION MODEL NAME: LMCRA050Z H N1 Date: 2013 / 02 / 18 Customer Signature Customer Approved Date Approved By Reviewed By Record of Revision Version Revise Date
More informationASI-T-700XA2DN/D. Item Contents Unit. Size 7.0 inch. Resolution 800X3(RGB) x 480 / Interface Digital,Parallel8-bit RGB / Technology type a-si TFT /
Item Contents Unit Size 7.0 inch Resolution 800X3(RGB) x 480 / Interface Digital,Parallel8-bit RGB / Technology type a-si TFT / Pixel pitch 0.1926x0.1790 mm Pixel Configuration R.G.B. Stripe Outline Dimension
More informationCHIMEI INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT070TNA2 V.1 SPEC NO.: A070-A2-TT-11 Date: 2010
CHIMEI INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT070TNA2 V.1 SPEC NO.: A070-A2-TT-11 Date: 2010/08/30 Version: 01 Preliminary Specification Final Specification For Customer
More informationDEM A VMH-PW-N 5 TFT
Display Elektronik GmbH TFT MODULE DEM 7201280A VMH-PW-N 5 TFT Product Specification Ver.: 0 25.08.2017 Revision History VERSION DATE REVISED PAGE NO. Note 0 25.08.2017 First Issue Version: 0 PAGE: 2 Contents
More informationTFT LCD Module Product Specification
TFT LCD Module Product Specification DT050TFT-TS 5.0 (800(RGB) x 480 PIXELS) TFT Module with Resistive Touch Panel June 1, 2016 Remark: Contents in this document are subject to change without notice. No
More informationLCD Module Product Specification
Website: www.displaytech.com.hk LCD Module Product Specification Product: DT043BTFT & DT043BTFT-TS 4.3'' TFT Display Module (480RGBx272DOTS) Contents in this document are subject to change without notice.
More informationRocktech Displays Limited
Rocktech Displays Limited LCD Module Specification Module P/N: RK043FN02H-CT Version: 1.0 Description : 4.3 inch TFT 480*272 pixels with LED Backlight and capacitive touch panel TEL: 0086-755-26065260
More informationRECORD OF REVISION. DigiWise International Corporation. Version Revised Date Page Content V /05/29 -- First Issued. 5/29/2015 Page 2 of 21
TFT Module Specification MODEL: 13-101ZIEB00C1-S PRELIMINARY SPECIFICATION APPROVAL SPECIFICATION CUSTOMER APPROVED BY DATE: DESIGNED CHECKED APPROVED MICROTIPS TECHNOLOGY USA 3504 Lake Lynda Dr, Suite
More informationDATE DESCRIPTION CHANGED BY. CHECKED BY FROM TO A First Release. ZENG LI HUANG YUAN LIANG
PAGE 2 OF 18 DOCUMENT REVISION HISTORY DOCUMENT REVISION DATE DESCRIPTION CHANGED BY CHECKED BY FROM TO A 2010.07.15 First Release. ZENG LI HUANG YUAN LIANG PAGE 3 OF 18 CONTENTS Page No. 1. GENERAL DESCRIPTION
More informationCHIMEI INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
CHIMEI INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT065TN14 SPEC NO.: A065-14-TT-02 Date: 2011/09/05 Version: 02 Preliminary Specification Final Specification For Customer
More informationINNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT080TN52 V.1 SPEC NO.: A080-52-TT-12 Date: 2008/11/04 Version: 01 Preliminary Specification Final Specification For Customer
More informationINNOLUX. Record of Revision. Version Revise Date Page Content /12/26 Initial Release
InnoLux copyright 2004 All rights reserved, Copying forbidden. Record of Revision Version Revise Date Page Content 1 2005/12/26 Initial Release Contents 1. General Specifications...1 2. Pin Assignment...2
More informationTFT LCD Module Product Specification
TFT LCD Module Product Specification DT028BTFT-TS 2.8 (240(RGB) x 320 PIXELS) TFT Module with Resistive Touch Panel June 1, 2016 Remark: Contents in this document are subject to change without notice.
More informationSpecification for Approval
Specification for Approval Customer: Model Name: Supplier Approval R&D Designed R&D Approved QC Approved Customer approval Peter Peng Jun YU DU AMSON ELECTRONICS CO.,LTD. Page 1 of 21 Revision Record REV
More informationProduct Specification 7 COLOR TFT-LCD MODULE
Doc. Version 0.0 Total Page 20 Date 2009/02/05 Product Specification 7 COLOR TFT-LCD MODULE MODEL NAME: C070VW02 V1 < >Preliminary Specification < >Final Specification Note: The content of this specification
More informationFORMIKE ELECTRONIC CO.,LTD
PRDUCT SPECIFICATON TFT LCD MODULE MODEL NO. : KWH080KQ03-F01 Preliminary Specification Finally Specification CUSTOMER'S APPROVAL SIGNATURE: DATE: APPROVED PM PD PREPARED BY REVIEWD REVIEWD BY Ken Lily
More informationVer. Edi. Description Page Design by. 10/24/ New Drawing - Yuan. Modify Optical Characteristics Modify Drawing
TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : SH800480T013-IBA01 MASS PRODUCTION CODE : PH800480T013-IBA01 SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 006 DRAWING NO. (Ver.) : LMD-PH800480T013-IBA01
More informationSPECIFICATIONS CUSTOMER : GFTM043IA S_ CERTIFICATION : Revision Record PAGE 1/14 ISO 9001:2008 ISO 14001:2004. Environmentally Certified
SO 9001:2008 SO 14001:2004 SPECFCATONS CUSTOMER : MODEL NO. : GFTM043A480272-S_ VERSON DATE : : A 2012.04.03 CERTFCATON : Customer Sign Sales Sign ROHS Approved By Prepared By Revision Record Data(y/m/d)
More information070CBOT-01P
070CBOT-01P 7.080048 Contents 1.0 General description 2.0 Absolute maximum ratings 3.0 Optical characteristics 4.0 Block diagram... 5.0 Interface pin connection... p. 6.0 Electrical characteristics...
More informationTFT LCD Module Product Specification
TFT LCD Module Product Specification DT022CTFT 2.2 (240(RGB) x 320 PIXELS) TFT Module January 9, 2018 Remark: Contents in this document are subject to change without notice. No part of this document may
More informationAbsolute Maximum Rating NOTE: Do not exceed these ratings at any time. Item Symbol Remark Min. Max. Unit DV DD V AV DD
800 x 480 Pixels LCD Color Monitor The AND-TFT-TN is a compact full color TFT LCD module, whose driving board is capable of converting composite video signals to the proper interface of LCD panel and is
More informationMODEL NAME: LMCAA09 0Y VN1
9.0 inch TFT LCD without Touch Panel SPECIFICATION MODEL NAME: LMCAA09 0Y VN1 Date: 2010 / 11 / 24 Customer Signature Customer Approved Date Approved By Reviewed By Table of Contents Table of Contents...
More informationTFT Display Module. Part Number E43RG34827LW2M300-R
Ph. 480-503-4295 NOPP@FocusLCD.com TFT CHARACTER UWVD FSC SEGMENT CUSTOM REPLACEMENT TFT Display Module Part Number E43RG34827LW2M300-R Overview 480x272(105.4x67.15), 8/16/18/24 bit RGB interface, WHITE
More informationT2432C15VQ01 REV. B (3.5 Digital TFT with Touch Panel) 1-Chip Solution
LCD MODULE (DEPARTMENT) SPECIFICATION T2432C15VQ01 REV. B (3.5 Digital TFT with Touch Panel) 1-Chip Solution CUSTOMER APPROVAL... STAMP AND SIGNATURE DATE: IMPORTANT NOTE: This document must be approved
More informationLCD MODULE SPECIFICATION
MULTIINNO TECHNOLOGY CO., LTD. LCD MODULE SPECIFICATION Model : MI0350D1T2 Revision Engineering Date Our Reference MODULE NO.: MI0350D1T2 DOCUMENT REVISION HISTORY DOCUMENT REVISION DATE FROM TO DESCRIPTION
More informationSpecification for Approval
Specification for Approval Customer: Model Name: Supplier Approval R&D Designed R&D Approved QC Approved Customer approval Peter Peng Jun YU DU AMSON ELECTRONICS CO.,LTD. Page 1 of 23 Revision Record REV
More informationTFT LCD Module Product Specification
TFT LCD Module Product Specification DT070CTFT-TS 7.0 (800(RGB) x 480 DOTS) TFT Module with Resistive Touch Panel January 2, 2018 Remark: Contents in this document are subject to change without notice.
More informationLCD Module Product Specification
Website: www.displaytech.com.hk LCD Module Product Specification Product: DT022ATFT 2.2'' TFT Display Module (240RGBx320DOTS) Contents in this document are subject to change without notice. No part of
More informationMicrotech Technology Co. Ltd.
Microtech Technology Co. Ltd. PRODUCT SPECIFICATIONS MODULE NO. :MTF0240CMIL-06 REVISION :V3.0 DRAWING BY : QSC DATE : 2012-09-18 APPROVED BY : DATE : FOR CUSTOMER S APPROVAL CHECK BY: DATE : APPROVED
More informationSPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY
AZ DISPLAYS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY CUSTOMER APPROVAL PART NO. : ATM0700D38B-CT (AZ DISPLAYS) VER1.3 APPROVAL COMPANY CHOP CUSTOMER COMMENTS AZ DISPLAYS ENGINEERING APPROVAL DESIGNED
More informationCHANGED BY A First Release. ZHANG YAN FANG
VLPSCOGT350MCQH01 REV.A (COGT350MCQH01) PAGE 2 OF 20 DOCUMENT REVISION HISTORY DOCUMENT REVISION DATE FROM TO DESCRIPTION CHANGED BY A 2007.05.15 First Release. ZHANG YAN FANG CHECKED BY LIN GUO HUI VLPSCOGT350MCQH01
More informationASI-T-500MA6F5/D. Item Contents Unit. Size 5.0 inch. OutlineDimension(WxHxD) x76.20x5.00 mm. Active Area x mm
Item Contents Unit Size 5.0 inch Resolution 800(RGB) x 480 / Interface RGB 24 bits / Technology type a-si TFT / Pixel pitch 0.135x0.135 mm Pixel Configuration R.G.B. Vertical Stripe OutlineDimension(WxHxD)
More informationINNOLUX InnoLux copyright 2004 All rights reserved, Copying forbidden. Record of Revision Version Revise Date Page Content Pre-spec /07/21 Ini
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT070TN84 V.1 SPEC NO.: A070-84-TT-11 Date: 2008/07/21 Version: 01 Preliminary Specification Final Specification For Customer
More informationANDpSi025TD-LED 320 x 240 Pixels TFT LCD Color Monitor
320 x 240 Pixels TFT LCD Color Monitor The ANDpSI025TD-LED is a 2.5 active matrix color TFT LCD module, that is suitable for applications such as a portable television (NTSC), camcorder, digital camera
More informationTFT Display Module TFT CHARACTER UWVD FSC SEGMENT CUSTOM REPLACEMENT. Part Number. Overview. Ph E24RG12432LWIM800-C
Ph. 480-503-4295 NOPP@FocusLCD.com TFT CHARACTER UWVD FSC SEGMENT CUSTOM REPLACEMENT TFT Display Module Part Number E24RG12432LWIM800-C Overview 2.4 inch TFT: 240x320(42.72x60.26), 18- bit RGB; 8/16-bit
More information5.6 TFT LCD. Date: Customer. Approved by. Reviewed by
5.6 inch TFT LCD Withoutt Touch Panel SPECIFICATION MODEL NAME: LMIX0560NTN53V1 Date: 2010 / 04 / 06 Customer signature Customer Approved date Approved by Reviewed by Record of Revision Version Revise
More informationDLC Display Co., Limited 德爾西顯示器有限公司
DLC Display Co., Limited 德爾西顯示器有限公司 MODEL No: DLC0220JZD-1 TEL: 86-755-86029824 FAX: 86-755-86029827 E-MAIL: sales@dlcdisplay.com WEB: www.dlcdisplay.com . Module Name: DLC0220JZD-1 Ver1.0 Record of Revision
More informationSpecification for Approval
Specification for Approval Customer: Model Name: Supplier Approval R&D Designed R&D Approved QC Approved Customer approval Peter Peng Jun YU DU AMSON ELECTRONICS CO.,LTD. Page 1 of 22 Revision Record REV
More informationProduct Specification
Customer: Model Name: Date: Version: Product Specification H0154PHQ 24I1804 Preliminary Specification Final Specification For Customer s Acceptance Approved by Comment Approved by Reviewed by Prepared
More informationASI-T-283DA5QN/D. Item Contents Unit. Size 2.83 inch. Resolution 240(RGB) x 320 / Interface 3-wire SPI &RGB / Technology type a-si /
Item Contents Unit Size 2.83 inch Resolution 240(RGB) x 320 / Interface 3-wire SPI &RGB / Technology type a-si / Pixel pitch 0.18x0.18 mm Pixel Configuration R.G.B. Vertical Stripe Outline Dimension (W
More informationAMP DISPLAY INC. SPECIFICATIONS AMP DISPLAY INC 9856 SIXTH STREET RANCHO CUCAMONGA CA TEL: FAX:
AMP DISPLAY INC. SPECIFICATIONS CUSTOMER CUSTOMER PART NO. AMP PART NO. APPROVED BY DATE Approved For Specifications Approved For Specifications & Sample AMP DISPLAY INC 9856 SIXTH STREET RANCHO CUCAMONGA
More informationSPECIFICATION. Hans Chen. David Lee. James Yu Charlie Chou. Customer: Model Name: AT070TN92 V.5 SPEC NO.: A TT-51 Date: 2010/11/05 Version: 01
SPECIFICATION Customer: Model Name: AT070TN92 V.5 Date: 2010/11/05 Version: 01 Preliminary Specification Final Specification For Customer s Acceptance Approved by Comment Approved by Reviewed by Prepared
More informationLCD MODULE SPECIFICATION
MULTI-INNO TECHNOLOGY CO., LTD. LCD MODULE SPECIFICATION Model : MI0700G1T Revision 01 Engineering Date Our Reference Record of Revision Version Revise Date Page Content Pre-spec. 01 2009/03/26 Initial
More informationMODEL NO.: G070Y3-T01
Issued Date Apr. 2, 2 Model No. G7Y3-T TFT LCD Specification MODEL NO. G7Y3-T Customer Approved by Note 2-4-22 73956 APPL (yhchang) Director Accept / 27 Issued Date Apr. 2, 2 Model No. G7Y3-T - CONTENTS
More informationAMP DISPLAY INC. SPECIFICATIONS AMP DISPLAY INC 9856 SIXTH STREET RANCHO CUCAMONGA CA TEL: FAX:
AMP DISPLAY INC. SPECIFICATIONS CUSTOMER CUSTOMER PART NO. AMP PART NO. AM-240320MJTNQW-00H APPROVED BY DATE Approved For Specifications Approved For Specifications & Sample AMP DISPLAY INC 9856 SIXTH
More informationMODEL NO.: G070Y2-L01
Issued DateOct. 3,29 Model No. G7Y2-L TFT LCD Specification MODEL NO. G7Y2-L Customer Approved by Note 29--8 4563 APPL (yhchang) Director Accept / 28 Version 2. Issued DateOct. 3,29 Model No. G7Y2-L -
More informationAPPROVAL SHEET. Sample. Customer. Approved Checked by Made by. Approval option: Specification MODEL NO: T070MTQA-01. Approved by: Date: Note:
APPROVAL SHEET MODEL NO: Approval option: Specification Sample Customer s Confirmation Customer Approved by: Date: Note: Center Confirmed: Approved Checked by Made by Records of Revision DATE REF.PAGE
More informationMicrotech Technology Co. Ltd.
Microtech Technology Co. Ltd. PRODUCT SPECIFICATIONS MODULE NO. :MTF0240QTI-17 REVISION: V1.0 DRAWING BY : QSC DATE : 2016-05-25 APPROVED BY : DATE : FOR CUSTOMER S APPROVAL CHECK BY: DATE : APPROVED BY:
More informationSPECIFICATION FOR LCD MODULE MODULE NO: AFD A0L-10.1N6NTM-C VERSION NO.: V1.0
SPECIFICATION FOR LCD MODULE MODULE NO: AFD1024600A0L-10.1N6NTM-C VERSION NO.: V1.0 Customer s Approval: PREPARED BY CHECKED BY APPROVED BY SIGNATURE DATE Orient Display (NA) Ltd. 145 Royal Crest Court
More informationNHD EF-ASXV#
NHD-7.0-800480EF-ASXV# TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD- Newhaven Display 7.0-7.0 Diagonal 800480-800xRGBx480 Pixels EF- Model A- Built-in Driver / No Controller S- High
More informationMODEL NAME: LMCP017TW 03 NV1
1.77 inch TFT LCD without Touch Panel SPECIFICATION MODEL NAME: LMCP017TW 03 NV1 Date: 2013 / 08 / 27 Customer Signature Customer Approved Date Approved By Reviewed By Revision History Revision Date Originator
More informationItem Symbol Absolute Maximum Rating Unit Remarks
5.6 TFT LCD asi LCD Color Module The AND-TFT-56LP is a compact full color TFT LCD module, that is suitable for portable products, industrial products, hand-held products, security products, instrument
More informationRocktech Displays Limited 磐石电子有限公司
Rocktech Displays Limited 磐石电子有限公司 LCD Module Specification Module P/N: RK035FQ03-T Version: 1.0 Description : 3.5 inch TFT 320*240 Pixels with LED backlight and Touch Panel TEL: 0086-755-26065260 Fax:
More informationSPECIFICATION GEMINI TECHNOLOGY CO., LTD. Approval by Customer. NG,Problem survey: Product Model: K G035C3-TP. Quality Department by.
SPECIFICATION Product Model: K G035C3-TP Designed by R&D Checked by Quality Department by Approved by Approval by Customer OK NG,Problem survey: Approved By All Rights Reserved 1/18 Revision Record REV
More informationMidas Components Limited Electra House 32 Southtown Road Great Yarmouth Norfolk NR31 0DU England. Specification. VERSION DATE REVISED PAGE NO.
Midas Components Limited Electra House 32 Southtown Road Great Yarmouth Norfolk NR31 0DU England Telephone +44 (0)1493 602602 Fax +44 (0)1493 665111 Email sales@midasdisplays.com Website www.midasdisplays.com
More informationDOCUMENT REVISION HISTORY 1:
PAGE 2 OF 22 DOCUMENT REVISION HISTORY 1: DOCUMENT REVISION FROM TO DATE DESCRIPTION CHANGED BY A 2007.10.30 First Release. PHILIP CHENG CHECKED BY PHILIP HO PAGE 3 OF 22 CONTENTS Page No. 1. GENERAL DESCRIPTION
More informationTel: 1 (888) Fax: (407) Web:
Model No: Approved By Tel: 1 (888) 499-8477 Fax: (407) 273-0771 E-mail: mtusainfo@microtipsusa.com Web: www.microtipsusa.com RECORD OF REVISION Version Revised Date Page Content V1.0 2018/03/09 -- First
More informationSpecification for Approval
Specification for Approval Customer: Model Name: Supplier Approval R&D Designed R&D Approved QC Approved Customer approval Peter Peng Jun YU DU AMSON ELECTRONICS CO.,LTD. Page 1 of 23 Revision Record REV
More informationINNOLUX DISPLAY CORPORATION
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT050TN34 SPEC NO.: A050-34-TT-01 Date: 2008/04/21 Version: 01 Preliminary Specification Final Specification Remark Touch screen
More informationNHD MF VIDEO Board V1.1
NHD 3.5 320240MF VIDEO Board V1.1 TFT Evaluation Video Board NHD Newhaven Display 3.5 3.5 Diagonal 320240 320xRGBx240 pixels MF Model VIDEO Composite VIDEO input V1.1 Version 1.1 Newhaven Display International,
More informationOutline Dimension. View Angle
320 x 234 Pixels LCD Color Monitor The is a compact full color TFT LCD module, whose driving board is capable of converting composite video signals to the proper interface of LCD panel and is suitable
More informationNote 1: RoHS compliant. Note 2: LCM weight tolerance: ± 5%.
ITEM CONTENTS UNIT LCD Type TFT/Transmissive/Normally white / Size 5.0 Inch Viewing Direction 12:00 (without image inversion) O Clock Gray Scale Inversion Direction 6:00 O Clock LCM (W H D ) 136.00 92.80
More informationTEL: TIPS (8477) FAX: (407) WEB:www.microtipsusa.com
Model No: MT TEL: 1-888-499-TIPS (8477) FAX: (407) 273-0771 E-MAIL: mtusainfo@microtipsusa.com WEB:www.microtipsusa.com . Record of Revision Date Revision No. Summary 2011-05-26 1.0 Rev 1.0 was issued
More informationDisplays AND-TFT-5PA PRELIMINARY. 320 x 234 Pixels LCD Color Monitor. Features
PRELIMINARY 320 x 234 Pixels LCD Color Monitor The is a compact full color TFT LCD module, whose driving board is capable of converting composite video signals to the proper interface of LCD panel and
More informationMODEL NAME: LMTAA070Y V12
7.0 inch TFT LCD Without Touch Panel SPECIFICATION MODEL NAME: LMAT1020NA0DCWHB6 MODEL NAME: LMTAA070Y V12 Date: 2011 / 10 / 11 Customer Signature Customer Approved Date Approved By Reviewed By Contents
More informationRecord of Revision ASI-T-283DA3CN/D
Item Contents Unit Size 2.83 inch Resolution 240(RGB) x 320 / Interface CPU / Technology type a-si / Pixel pitch 0.18x0.18 mm Pixel Configuration R.G.B. Vertical Stripe Outline Dimension (W x H x D) 50.0x69.2x2.3
More informationSPECIFICATION FOR TFT LCD MODULE MODEL NO.: LT050B-01B
Laurel Electronics Co., Ltd. SPECIFICATION FOR TFT LCD MODULE MODEL NO.: LT050B-01B 5.0, 480(RGB) x 272 PIXELS TFT LCD MODULE REVISION PREPARED CHECKED APPROVED 0.1 Y.D.Y. L.Y.J. L.Y. Laurel Electronics
More informationINNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT043TN24 V.1 SPEC NO.: A043-24-TT-13 Date: 2009/01/05 Version: 03 Preliminary Specification Final Specification Remark Touch Screen Panel
More informationMODEL NO.: G104S1-L01
Issued Date May 24, 2 Model No. G4S-L TFT LCD Approval Specification MODEL NO. G4S-L Customer Approved by Note FOR MORE INFORMATION AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http//www.AZDISPLAYS.com
More informationDRIVING BOARD SPECIFICATION
MULTI-INNO TECHNOLOGY CO., LTD. DRIVING BOARD SPECIFICATION MI703N1 Revision 1.1 Engineering Date Our Reference Address : Room 10J,Xin HaoFang Building, No.188 Shennan Road, Nanshan Drstrict, ShenZhen,China.
More information