12/2018 Technical application guide BackLED RGBW Plus G2 BackLED TW Plus G2 Light is OSRAM

Transcription

1 12/2018 Technical application guide BackLED RGBW Plus G2 BackLED TW Plus G2 Light is OSRAM

2 BackLED RGBW Plus G2 and BackLED TW Plus G2 Contents Contents 1 Product overview BackLED TW Plus G BackLED RGBW Plus G System information Technical data 05 2 Product overview: OPTOTRONIC electronic devices OPTOTRONIC all-in-one devices OTi DALI 50/ / CH OTi DALI 80/ / CH OTi DALI 160/ / CH OTi DALI 50/ /24 TW OTi DALI 80/ /24 TW OTi DALI 160/ /24 TW 09 3 System combination System overview: LED chains and control devices System overview: All-in-one devices LED chains Recommended solutions 11 4 Application overview 14 5 Thermal properties Casing temperature at the t c point Measuring the t c temperature 15 6 Norms and standards BackLED RGBW Plus G2 and BackLED TW Plus G Further information 17 Please note: All information in this guide has been prepared with great care. OSRAM, however, does not accept liability for possible errors, changes and/or omissions. Please check or contact your sales partner for an updated copy of this guide. This technical application guide is for information purposes only and aims to support you in tackling the challenges and taking full advantage of all opportunities the technology has to offer. Please note that this guide is based on own measurements, tests, specific parameters and assumptions. Individual applications may not be covered and need different handling. Responsibility and testing obligations remain with the luminaire manufacturer/oem/ application planner. 2

3 BackLED RGBW Plus G2 and BackLED TW Plus G2 Product overview 1 Product overview 1.1 BackLED TW Plus G2 The BackLED TW Plus G2 version has six warm-white LEDs with 2700 K and six cold-white LEDs with 6500 K per single module. Connected to light management systems, BackLED TW Plus G2 allows simulating daylight in hospitality or in shop applications. Product benefits Dynamic white light: Easy control of the color temperature from 2700 to 6500 K (in conjunction with a light management system) Outstanding uniform illumination of almost any shape Applications Light ceilings for daylight simulation Color temperature adjustable to application requirements Sales fl oor: Merchandise can be highlighted with variable color temperatures Cultural institutions: Almost IR- and UV-free light protects sensitive exhibits Hospitality: Dynamically changing white light activates or relaxes Light distribution curve 2700 K and 6500 K BackLED TW Plus G Technical features Maximum power: 96 W Luminous effi cacy: 95 lm/w Dimensions (L x W x H): 8400 x 35 x 17.2 mm; length adjustable Very broad beam angle for homogeneous backlighting IP66/IP68 protection Lifetime: up to hours One chain consisting of 20 modules with six LEDs with 2700 K and six LEDs with 6500 K No additional heat sink needed Mounting profi le available as accessory for quick installation without tools cd/klm η = 100% C0 - C180 C90 - C cd/klm η = 100% C0 - C180 C90 - C270 Spectral data 2700 K Spectral data 6500 K Wavelength (nm) Wavelength (nm) 3

4 BackLED RGBW Plus G2 and BackLED TW Plus G2 Product overview 1.2 BackLED RGBW Plus G2 The BackLED RGBW Plus G2 has two red, green and blue LEDs each, plus two cold-white 6500 K LEDs, thus enabling even a mixing of soothing pastel colors. In combination with light management systems, the BackLED RGBW Plus G2 offers you control over dynamic color effects or very specifi c colors. Product benefits Outdoor LED chain for dynamic, colored backlighting RGBW LED with specially designed optics for very high color homogeneity Applications Light ceilings for mood lighting Signage and illuminated advertising Large light boxes, replacement of colored fl uorescent tubes Backlighting for shop, hospitality and architainment applications BackLED RGBW Plus G2 Technical features Total maximum power: 55.2 W Dimensions (L x W x H): 6000 x 35 x 13.5 mm; length adjustable Very broad beam angle for homogeneous backlighting IP66/IP68 protection Lifetime: up to hours One chain consisting of 15 modules with two red, green and blue LEDs each Modules optimized for use with OSRAM OPTOTRONIC power supplies No additional heat sink needed Mounting profi le available as accessory for quick installation without tools Light distribution curve RGBW cd/klm η = 98% C0 - C180 C90 - C270 Spectral data red Spectral data green Spectral data blue Spectral data white (6500K) 4

5 BackLED RGBW Plus G2 and BackLED TW Plus G2 Product overview 1.3 System information Technical data Product family Product group BackLED RGBW Plus G2 BackLED TW Plus G2 Product reference BA-RGBW-PL G2 BA-TW-PL G2 Product number Light color RGBW TW white red green blue cold white warm white No. of LED modules per chain (no. of LEDs per module) 15 (8) 20 (12) (2) (2) (2) (2) Voltage [V] Total current [A] Current per color [A] Total power per chain (per module) [W] 52.8 (10.6 x min. unit 3 modules) 96 (4.8) Power per color [W] Luminous flux per chain (per module) [lm] 710 (47) 490 (33) 960 (64) 150 (10) 4800 (240) 4400 (220) Beam angle [ ] Color temperature [K] Wavelength [nm] Accessories Product group Mounting profile Product reference BX-MP Product number Product benefits Can easily be shortened to any length Quick and easy mounting of the profi le with self-tapping screws or pop rivets Quick and simple snap-in fi xing of the LED modules, no tools required Robust aluminum profi le Areas of application Advertising and lettering Backlighting of light boxes Easy retrofi tting of old light boxes Stretched ceilings Technical features Universally applicable mounting profi le for light boxes Overall length: 2,365 mm Integrated 55 mm mounting grid for simple positioning of the LED modules Integrated holes for cable tying 5

6 BackLED RGBW Plus G2 and BackLED TW Plus G2 Product overview Labeling BackLED RGBW Field C: LED bin Field D: Date code G2 24V DC XXX XXX XXX XXX XXX 10.56W / 3 modules Field A: Generation Field B: Voltage Field E: Power Labeling BackLED TW Module code Date code G2 24V DC XX XX XXX 4.8W / modules Generation Voltage Power 6

7 BackLED RGBW Plus G2 and BackLED TW Plus G2 Product overview: OPTOTRONIC electronic devices 2 Product overview: OPTOTRONIC electronic devices 2.1 OPTOTRONIC all-in-one devices OTi DALI 50/ / CH EAN: Product features Dimmable via Touch DIM (if supported) LED driver whose output power can be shared arbitrarily among the 2 or 4 channels Dimming range: % Line frequency: 0 Hz 50 Hz 60 Hz Product benefits Intelligent power matching thanks to Smart Power Supply Slim form factor for mounting on the cove or in linear luminaires Minimized fl icker thanks to high PWM frequency Suitable for installation in emergency lighting systems according to EN Available as Tunable White version (DALI Device Type 8) DALI message detection LED module failure IP rating: IP OTi DALI 80/ / CH EAN: Product features Dimmable via Touch DIM (if supported) LED driver whose output power can be shared arbitrarily among the 2 or 4 channels Dimming range: % Line frequency: 0 Hz 50 Hz 60 Hz Product benefits Intelligent power matching thanks to Smart Power Supply Slim form factor for mounting on the cove or in linear luminaires Minimized fl icker thanks to high PWM frequency Suitable for installation in emergency lighting systems according to EN Available as Tunable White version (DALI Device Type 8) DALI message detection LED module failure IP rating: IP20 Please note: Additional technical information can be found in the technical data overview on page 10 or at the OSRAM website 7

8 BackLED RGBW Plus G2 and BackLED TW Plus G2 Product overview: OPTOTRONIC electronic devices OTi DALI 160/ / CH EAN: Product features Dimmable via Touch DIM (if supported) LED driver whose output power can be shared arbitrarily among the 1 or 2 channels Dimming range: % Line frequency: 0 Hz 50 Hz 60 Hz Product benefits Intelligent power matching thanks to Smart Power Supply Slim form factor for mounting on the cove or in linear luminaires Minimized fl icker thanks to high PWM frequency Suitable for installation in emergency lighting systems according to EN Available as Tunable White version (DALI Device Type 8) DALI message detection LED module failure IP rating: IP OTi DALI 50/ /24 TW EAN: Product features Dimmable via Touch DIM (if supported) LED driver whose output power can be shared arbitrarily among the 2 or 4 channels Dimming range: % Line frequency: 0 Hz 50 Hz 60 Hz Product benefits Intelligent power matching thanks to Smart Power Supply Slim form factor for mounting on the cove or in linear luminaires Minimized fl icker thanks to high PWM frequency Suitable for installation in emergency lighting systems according to EN DALI message detection LED module failure IP rating: IP20 8

9 BackLED RGBW Plus G2 and BackLED TW Plus G2 Product overview: OPTOTRONIC electronic devices OTi DALI 80/ /24 TW EAN: Product features Dimmable via Touch DIM (if supported) LED driver whose output power can be shared arbitrarily among the 2 or 4 channels Dimming range: % Line frequency: 0 Hz 50 Hz 60 Hz Product benefits Intelligent power matching thanks to Smart Power Supply Slim form factor for mounting on the cove or in linear luminaires Minimized fl icker thanks to high PWM frequency Suitable for installation in emergency lighting systems according to EN DALI message detection LED module failure IP rating: IP OTi DALI 160/ /24 TW EAN: Product features Dimmable via Touch DIM (if supported) LED driver whose output power can be shared arbitrarily among the 2 or 4 channels Dimming range: % Line frequency: 0 Hz 50 Hz 60 Hz Product benefits Intelligent power matching thanks to Smart Power Supply Slim form factor for mounting on the cove or in linear luminaires Minimized fl icker thanks to high PWM frequency Suitable for installation in emergency lighting systems according to EN DALI message detection LED module failure IP rating: IP20 9

10 BackLED RGBW Plus G2 and BackLED TW Plus G2 System combination 3 System combination 3.1 System overview: LED chains and control devices ~230 V 24 V 24 V DIM Power supplies (24 V) OT 20/ / OT 50/ / OT 75/ / OT 75/ /24 E OT 20/ /24 P OT 40/ /24 P OT 60/ /24 P OT 100/ /24 P OTe 120/ /24 E OT 130/ /24 P OT 250/ /24 P Suggested dimming devices * OTi DALI DIM OT DMX RGBW DIM OT BLE DIM LED modules BackLED TW Plus G2 BackLED RGBW Plus G2 All-in-one devices OTi DALI 50/ / CH OTi DALI 50/ /24 TW OTi DALI 80/ /24 TW OTi DALI 80/ / CH OTi DALI 160/ / CH OTi DALI 160/ /24 TW *Refer to the OSRAM website for the complete range of dimming devices 3.2 System overview: All-in-one devices LED chains Product BackLED RGBW Plus G2 BackLED TW Plus G2 Maximum power per chain 55.2 W 96.0 W OTi DALI 50/ / CH Maximum: 12 modules Maximum: 10 modules OTi DALI 80/ / CH 1 chain (15 modules) + 6 modules (parallel) Total maximum: 21 modules Maximum: 16 modules OTi DALI 160/ / CH 1 chain (20 modules) + 13 modules (parallel) Total maximum: 33 modules Overview: Power consumption of individual channels Product BackLED RGBW Plus G2 BackLED TW Plus G2 Color per chain per min. 3-modules unit per chain per single module 2700 K 2 A -> 48 W 0.1 A -> 2.4 W 6500 K 2 A 48 W 0.1 A -> 2.4 W Red 0.55 A 13.2 W 0.11 A -> 2.64 W Green 0.9 A 21.6 W 0.18 A -> 4.32 W Blue 0.45 A 10.8 W 0.9 A 2.16 W White 0.30 A 7.2 W 0.06 A -> 1.44 W Total 2.20 A 52.8 W 4 A 96 W 10

11 BackLED RGBW Plus G2 and BackLED TW Plus G2 System combination 3.3 Recommended solutions In most cases, the two following options are the two easiest solutions: Option 1: OTi DALI TW + BackLED TW Plus G2 PE N L L 24 V (+) N COLD (-) WARM (-) DA DA OTi DALI TW nc nc + C (-) W (-) + BackLED TW Plus G2 C DALI control device Option 2: OTi DALI 1-4 CH + BackLED TW Plus G2 PE N L OTi DALI 1-4 CH L 24 V (+) N CH1 (R-) CH2 (G-) CH3 (B-) DA CH4 (W-) DA + W (-) C (-) BackLED TW Plus G2 + C DALI control device OTi DALI 1-4 CH configuration DIP1 DIP2 1-channel device (1 DALI address): 80 W (50 W) at channel 1 ON ON 2-channel device (2 DALI addresses): 80 W (50 W) split between channel 1 and 2 OFF ON 3-channel device (3 DALI addresses): 80 W (50 W) split between channel 1, 2 and 3 ON OFF 4-channel device (4 DALI addresses): 80 W (50 W) split between channel 1, 2, 3 and 4 OFF OFF 11

12 BackLED RGBW Plus G2 and BackLED TW Plus G2 System combination Option 3: OTi DALI 1-4 CH + BackLED RGBW Plus G2 PE N L OTi DALI 1-4 CH L 24 V (+) N CH1 (R-) CH2 (G-) CH3 (B-) DA CH4 (W-) DA + R G B W BackLED RGBW Plus G2 DALI control device OTi DALI 1-4 CH configuration DIP1 DIP2 1-channel device (1 DALI address): 80 W (50 W) at channel 1 ON ON 2-channel device (2 DALI addresses): 80 W (50 W) split between channel 1 and 2 OFF ON 3-channel device (3 DALI addresses): 80 W (50 W) split between channel 1, 2 and 3 ON OFF 4-channel device (4 DALI addresses): 80 W (50 W) split between channel 1, 2, 3 and 4 OFF OFF Option 4: OT...24 V + OT BLE DIM + BackLED TW or RGBW Plus G2 PE N L + BackLED RGBW Plus G2 R OT...24 V G B L N + 24 V V - -COM1 + IN 1 OT BLE DIM IN (-) (+) (+) (+) 4 channels color Tunable White (-) W (-) B (-) G (or COLD WHITE) (-) R (or WARM WHITE) W + C (-) W (-) BackLED TW Plus G2 + C W B G R WW (R) CW (G) 12

13 BackLED RGBW Plus G2 and BackLED TW Plus G2 System combination Secondary wire calculation BackLED RGBW Plus G2 AWG20/0.57 mm 2 AWG18/0.79 mm 2 AWG14/2.08 mm 2 AWG13/2.62 mm 2 AWG16/1.23 mm mm mm 2 60 Maximum secondary cable length [m] W 12 modules 4 units 55 W 16 modules 1 chain (5 units) W 6 modules 2 units 33 W 9 modules 3 units 44 W 12 modules 4 units 55 W 15 modules 1 chain LED module power [W] BackLED TW Plus G2 AWG20/0.57 mm 2 AWG18/0.79 mm 2 AWG14/2.08 mm 2 AWG13/2.62 mm 2 Maximum secondary cable length [m] AWG16/1.23 mm mm mm W 15 modules 3/4 chain 96 W 20 modules 1 chain W 5 modules 1/4 chain 48 W 10 modules 1/2 chain 72 W 15 modules 3/4 chain 96 W 20 modules 1 chain LED module power [W] LED driver LED module LED module LED module Max. secondary length = LED driver fi rst LED module + wire extension LED module LED module + Disclaimer: In terms of electromagnetic compatibility (EMC), the maximum permitted cable length is 10 meters (please refer to the technical data sheet of the applied OSRAM OPTOTRONIC LED driver). Users are responsible to ensure EMC. Please note: We recommend to use the LED modules only in combination with OSRAM OPTOTRONIC LED drivers. The maximum secondary length is the maximum cable length between the LED driver and the fi rst LED module of a chain plus the wire extensions between the LED modules (see above). 13

14 BackLED RGBW Plus G2 and BackLED TW Plus G2 Application overview 4 Application overview BackLED TW Plus G2 homogeneity Transmission T < 25 % T < 40 % T < 50 % Luminance [cd/m²] ~8.5 modules per m² 2700 K 280 Minimum depth [mm] Luminance [cd/m²] 420 Minimum depth [mm] Luminance [cd/m²] 355 Minimum depth [mm] 6500 K Both ~19 modules per m² 2700 K K Both BackLED RGBW Plus G2 homogeneity Transmission T < 25 % T < 40 % T < 50 % Luminance [cd/m²] ~8.5 modules per m² 2700 K 280 Minimum depth [mm] Luminance [cd/m²] 420 Minimum depth [mm] Luminance [cd/m²] 355 Minimum depth [mm] 6500 K Both ~19 modules per m² 2700 K K Both

15 BackLED RGBW Plus G2 and BackLED TW Plus G2 Thermal properties 5 Thermal properties 5.1 Casing temperature at the t c point The casing temperature is the temperature at a defi ned point on the LED casing, the t c point. The maximum t c temperature is the highest permitted temperature that may occur at the t c point under the planned ambient and operating conditions in the thermally steady state. Thermo-wire NiCr Ni Thermo element Type K with mini connector Mini connector K If the maximum permitted t c temperature is exceeded, the LED module may go into a state in which the load limits on the module (LED, PCB, optics and electrical components) are reached. A thermal link between the BackLED modules and the mounting surface is not absolutely essential. 5.2 Measuring the t c temperature The indicated lifetime can only be achieved if the permitted operating temperatures at the t c point are maintained. After the LED modules have been installed in an application, the t c temperature must be measured under the planned ambient and operating conditions in the thermally steady state. To do this, attach a temperature sensor to the t c point with a suitable adhesive (cyanoacrylate-free). The illustration below shows the t c reference point, marked by a small rectangle on the front of the LED module. Permitted t c temperatures Operating temperature at the t c point* [ C] BackLED RGBW Plus G2-25 to 75 BackLED TW Plus G2-25 to 80 * If the maximum temperature limits are exceeded, the lifetime of the module will be greatly reduced or the module may be destroyed. The temperature of the LED module at the t c point should be measured in the thermally steady state by means of a temperature sensor or temperature-sensitive sticker in accordance with EN For the precise position of the t c point, see the illustration below. BackLED RGBW Plus G2 BackLED TW Plus G2 t c point t c point t c point t c point 15

16 BackLED RGBW Plus G2 and BackLED TW Plus G2 Norms and standards 6 Norms and standards 6.1 BackLED RGBW Plus G2 and BackLED TW Plus G2 Eye security: IEC Flammability: IEC Protection class: EN Safety requirements: EN 62031, IEC EMC/radio disturbance characteristics: EN EMC/immunity: EN Approvals: CE 16

17 BackLED RGBW Plus G2 and BackLED TW Plus G2 Further information 7 Further information Product data sheets, technical guides, operating instructions, EULUMDATs and more information concerning the BackLED LED modules and OPTOTRONIC devices are available at the OSRAM website The catalog with the complete LED portfolio can be found here: Disclaimer All information contained in this document has been collected, analyzed and verified with great care by OSRAM. However, OSRAM is not responsible for the correctness and completeness of the information contained in this document and OSRAM cannot be made liable for any damage that occurs in connection with the use of and/or reliance on the content of this document. The information contained in this document reflects the current state of knowledge on the date of issue. 17

18 OSRAM GmbH Headquarters Germany Phone: OSRAM Lighting Middle East FZE Dubai United Arab Emirates Phone: ds-mea@osram.com OSRAM LDA Portugal, Açores, Madeira Phone: osram@osram.pt OSRAM a.s Office Austria Phone: info@osram.at OSRAM Lighting SASU France Phone: oem@osram.fr OSRAM OOO Russia DS Phone: +7 (499) ds-russia@osram.com OSRAM Benelux B.V. Netherlands Phone: +31 (0) osram@osram.nl Belgium Phone: +32 (0) osram@osram.be OSRAM Sales EOOD Bulgaria Phone: sales-sofi a@osram.com OSRAM d.o.o. Croatia Phone: osram@osram.hr OSRAM Ceska republika s.r.o. Czech Republic Phone: osram@osram.cz OSRAM A/S Denmark Phone: OSRAM Oy Finland Phone: asiakaspalvelu@osram.fi Baltic DS/OSRAM Oy Finland: Estonia, Latvia and Lithuania Phone: customerservice@osram.fi OSRAM Limited Great Britain Phone: oem@osram.com OSRAM a.s. Magyarországi Fióktelepe Hungary Phone: info@osram.hu OSRAM SpA Società Riunite OSRAM Edison Clerici Italy Phone: oemcentroservizi@osram.com OSRAM Lighting AS Norway Phone: OSRAM North Africa S.a.r.l. contact@osram.com OSRAM (Pty.) Ltd. South Africa Phone: OSRAM Sp. z.o.o. Poland Phone: biuro.pl@osram.pl OSRAM Romania S.R.L. Phone: +40 (21) osram_ro@osram.com OSRAM, a.s. Slovak Republic Phone: contact@osram.com OSRAM a.s. Slovenia Phone: info@osram.at OSRAM Lighting S.L. Spain Phone: marketing-ds@osram.com OSRAM AB Sweden Phone: info@osram.se OSRAM Lighting AG Switzerland Phone: info.ch@osram.com OSRAM Teknolojileri Ticaret A.S. Turkey Phone: contact@osram.com 12/2018 OSRAM DS SMK Subject to change without notice. Errors and omissions excepted. OSRAM GmbH Headquarters Germany: Marcel-Breuer-Strasse Munich, Germany Phone Fax