Local Control Network
|
|
- Bonnie Anderson
- 5 years ago
- Views:
Transcription
1 Installation guide ocal Control etwork C-G/K C-G: coupling module for glass fibre cables with a range up to km. C-K: coupling module for plastic cables with a range up to 00m. The modules C-G and C-K are fibre optic coupling modules for building installation with C-Bus technology. The C-G/K serves as an extension and electrical isolation in two-wire bus systems. To connect a fibre optic coupling module C-G or C-K onto the C-Bus, an isolation amplifier C-IS is also required. Up to 5 isolation amplifiers and/or -couplers can be directly switched together in each distibution box. ocal Control etwork C C- Please remove the housing cover when connecting the fibre optic cable! ISSEORFF ichtwellenleiter-koppler fibre optic coupling module U =30, P =W housing cover
2 FUSE ISSEORFF U =30, P =.5W ISSEORFF U =30, P =W ISSEORFF U =30, P =W FUSE ISSEORFF U =30, P =.5W ISSEORFF U =30, P =W ISSEORFF U =30, P =W C-G/K building controls in perfection Installation guide How it functions The fibre optic coupling modules are passive building groups, that are not shown in the C-PRO (the same as the C-IS). A conversion of electrical signals into light signals is carried out in the two-wire bus and vice versa. Through this, an electrical 3 3 RC C-Bus A * B RC * B C-Bus B A A A A ocal Control etwork C ocal Control etwork C ocal Control etwork C ocal Control etwork C ocal Control etwork C ocal Control etwork C C-SH Tx Rx idle C-IS C- C-SH Tx Rx idle C-IS C- Sensor-/Aktor I/O Controller Trennverstärker Isol.- Amplifier ichtwellenleiter-koppler fibre optic coupling module Sensor-/Aktor I/O Controller Trennverstärker Isol.- Amplifier ichtwellenleiter-koppler fibre optic coupling module T P + - T P + - -wire Bus (e.g. x0,6mm shielded) -wire Bus fibre optic cable -plastic (max. 00m) or -Glass fibre (max. km) B = distribution box *
3 Installation guide ocal Control etwork C-G/K isolation is guaranteed. This is necessary for example in buildings with several feeds or to avoid danger of overvoltages. Connecting the fibre optic cable C-K:. Step cutting : Cut the plastic fibre optic cable with a razor blade or a very sharp knife. Check the cut end from the front: Has the fibre optic cable been cut clean and smoothly? Was the cut vertical? Is the cut surface neat and round? illustration. Step polishing : take a clean sheet of paper and place the fibre optic cable vertically onto it. ow rub it with an evenly pressure over the paper in the form of a figure eight: After repeating 0 times, check illustration the cut surface again from the front: Is it nice and smooth all over? Otherwise repeat the polishing again. 3. Step connecting : Finally lead the prepared cable end as far as possible into the coupler and tighten the sleeve nut. 3
4 C-G/K building controls in perfection Installation guide The transmitter on the one C-K module must be connected with the receiver from the other C-K module. With the C-K you can determine the wire order very simply, because the transfer is carried out with a visible light. Supply both C-K s on the transfer route Building up the C-G/K s jumpers for reducing speed with control- E for the transmitter. Jumper in: OPERATIO = stuck in (full speed) TEST = open (half speed) 4 ready to operate transmitting display: flashes, when telegrams are sent to -route. transmitter reveiver receiver transmitter route route transmitting display: flashes, when telegrams are sent to -route. G- G- S+ S+ illustration C-K: Surrounding nut to fix the plastic- C-G: ST-Bayonetconnection for fibre glass- Connecting -wire Bus to further C-IS/C-x with 30 and short circuit the signal input ( wire bus): now all W transmitters will light up. Stick the lighted cable ends into each receiver.
5 Installation guide ocal Control etwork C-G/K otes: Fibre optic coupling modules can be operated without C-IS as repeaters (booster amplifiers). In one segment there is only one -wire bus allowed and not independent buses! Please see the graphic on page 3 in the installation guide of the C-IS. Over the data connection (-wire bus), up to 5 C-IS, C-K / -G s can be cou.- pled together in each distributuin box. You will find further informations over the -wire bus in the installation guide from the C-IS. aying fibre optic cable: The reliability of the whole bus system, depends on the careful laying of the fibre optic cables! That s why you should be aware of the following points: Fibre optic cables are not as mechanically robust as normal cable: When pulling into cable channels etc., avoid damaging and pulling round tight corners. Every tight bend reduces the range. That,s why you should leave it lying loosely, in corners and bends! Even in sharp corners the bending radius should not be less than 00 mm. This applies especially in distribution boxes: It s better to leave the fibre optic cable a little longer, than to lead it to the C-G / K pulled tightly. You should also cut out a small opening from the housing of the C-fibre optic coupling module. Always lay fibre optic cables in pairs (for directions to and from ) or use cable with fibers. 5
6 C-G/K building controls in perfection Installation guide Important:test operation Pull out the test plugs for the speed reducing from all fibre optic coupling modules (see illustr. on page 3). Go into the C-Bus with the C-PRO let all of the modules be listed. When all modules are found, the -connections are okay. Replace the test plugs; The -routes have a power reserve of 50% now and are safe against temperature and aging for decades. Topology (construction varaitions): IS K IS 3... IS 5 max. 5 participants (C-IS/-x) on one copper -wire-bus max. 5 node points (in line form) U U U5 IS IS K IS IS K IS IS K max. 3 node points with more than one C-x (star pattern) U U U U IS K G IS G G IS G K IS K IS U0 K IS U3 G 6
7 Installation guide ocal Control etwork C-G/K Technical data: Glass fibre coupler C-G plug connection: fibre optic: wavelength: range: Typ: ST (bayonet) Multimode-fibre: 50/5µm & 6,5/5µm; type damping,5db/km 80nm (invisible Infrared light) km Plastic coupler C-K connection: fibre optic: wavelength: range: Test operation test plug: repeater function: cable is fastened with sleeve nut POF 980/000 ( mmø); typ. damping 30dB/km 650nm (visible, red light) max.00m when carefully layed with C-K, otherwise 50m half the sending power (-3dB) when plug removed Max. 5 couplers per fibre optic cable, switchable in a row Important note: espite its extensive functionalities, the C system is simple to install and programme: It s all in the hands of the electrician. However a training course is necessary for every electrician, who installs this system. The direct users support over the telephone hotline, is only free of charge and open to installers who have taken part in a training course. C-Hotline Rufnummer
8 C-G/K building controls in perfection Installation guide Technical data Connection power supply: powerconsumption: terminals/wire type: Two-wire Bus terminals/wire type: cable length: participants: Installation: operating temperature: air humidity: environmental conditions: protection art: dimensions (BxxH): installation: 30AC ± 5%, 50/60Hz (0AC available) <W screwless, solid max.,5mm² or fine wire with wire-end sleeves max.,5mm loop through current max. 6A screwless, solid or fine wire 0,5-,5mm² (shielded) max. 50m (all together, connection to C-IS) max. 5( C-IS / -K / -G s) o o -0 C to +40 C max. 80% rel., non condensing Use as stationary installation according to E63, E637 IP 0 85,5mm (5HP) x 9mm x 66,5mm I rail mounting 35mm (I500) 8 C-G/K /0 Technical information and images are non binding. Changes are reserved. Technical hotline: or ISSEORFF KG, 357 Sarstedt
Local Control Network Function. The LCN-HL4 can be connected to all intelligent LCNI-port test key
LED 4-channel dimmer The LED-dimmer operates on the I-Port of an LCN-module with firmware 170212 (Feb. 2013) or later. The dimmer is specified for simple and flexible controlling of LED s with constant
More informationDIAS power supply and DIC 221 fibre optic cable coupling module
POWER SUPPLY AND FIBRE OPTIC COUPLING MODULE DIC 221 DIAS power supply and DIC 221 fibre optic cable coupling module for the power supply of DIAS function modules, 2 x fibre optic cable connections (DIAS
More informationInstallation. SAPTF33xx-1xx in the Network. Standard Configuration
SAPTF33xx-1xx in the Network Standard Configuration One Unit A device (SAPTF33xx-100) and one device () are required for the standard configuration. The Unit A device is connected to the while the device
More informationALM-6813/6812 INSTALLATION AND PROGRAMMING MANUAL
ALM-6813/6812 INSTALLATION AND PROGRAMMING MANUAL Installation and programming Manual v2.2 1 MARSS Solar Defender SYSTEM This guidebook provides the essential instructions to install and configure the
More informationFibre optic router for TP/FT-10 LRW-112PP
Fibre optic router for TP/FT-10 LRW-112PP Lo n Wo r k s to fibre optic link, point-to-point applications The LRW-112PP router offers an easy way to extend the distance between LONWORKS 78 kbit/s TP/FT
More informationLONWORKS Fibre Optic Router
LONWORKS Fiber Optic Router LRW-112 and LRW-112/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-112 router offers an easy way to extend the distance between LONWORKS
More informationLONWORKS Fibre Optic Converter
LONWORKS Fiber Optic Converter LRW-102 and LRW-102/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-102 is a fibre optic modem designed for multidrop and redundant ring
More informationScope: Using Wave Division Multiplexing (WDM) for the Protection Data Interface (PDI) of the 7SD5 / 7SD61.
Page 1 of 10 Using Technology for the PDI of the and 7SA522/7SA6 Scope: Using Wave Division Multiplexing () for the Protection Data Interface (PDI) of the 7SD5 /. Two important issues related to differential
More informationFiberLink 7142 Series
MANUAL FiberLink 7142 Series 4 Channels of Composite Video and 8 Channels of Audio over one single mode or multimode fiber Installation and Operations Manual WWW.ARTEL.COM FibeLink 7142 Series Contents
More informationHP SMA BFOC. Brief instruction. Version. 4en.
HP SMA BFOC Version 4en www.helmholz.com Application and function description The OPTopus PROFIBUS Optical Link is a normal PRO- FIBUS repeater despite its small dimensions. It permits the conversion of
More informationIndustrial Diode Laser (IDL) System IDL Series
COMMERCIAL LASERS Industrial Diode Laser (IDL) System IDL Series Key Features Round, top-hat beam profile for uniform power distribution Warranted for full rated power in either pulsed or continuous wave
More informationUser Manual CXE Rev (12) CXX Series. User Manual. Teleste Corporation CXE810. Fibre optic receiver
27.3.2012 1(12) CXX Series User Manual Teleste Corporation CXE810 Fibre optic receiver 27.3.2012 2(12) Contents Introduction... 3 Installation... 3 Housing... 3 Powering... 4 Interfaces... 4 Fibre installation...
More informationMICROSENS. Fast Ethernet Switch Modul 4x 10/100Base-TX, 1x 100Base-FX. Description. Features
Fast Ethernet Switch Modul 4x 10/100Base-TX, 1x 100Base-FX Description This Ethernet Switch Module has been designed with 4x10/100Base-TX ports and 1x100Base-FX fiber optic port for the interconnection
More informationI/A Series Hardware Fiber Optic LAN Converter
I/A Series Hardware PSS 21H-7F3 B4 The provides bidirectional conversion between coaxial and fiber optic media. The converter is compatible with existing I/A Series system hardware, utilizes industry standard
More informationFibre Optic Modem ODW-611
Fibre Optic Modem ODW-611 PROFIBUS DP to fibre optic link, point-to-point applications The ODW-611 is a fibre optic modem designed for point-to-point fibre optic connections between PROFI- BUS DP networks.
More informationTypical applications:
Typical applications: Managing multiple inputs for growing satellite teleports Extended L-band frequency for Ka-band & HTS applications Routing live traffic to multiple modems ETL s new ultra compact Hurricane
More informationProposal of Distributing 4 SAT IF Signals To 209 Homes within 3Km Over Fiber Cable
Proposal of Distributing 4 SAT IF Signals To 209 Homes within 3Km Over Fiber Cable Shufeng Yang Greatway Technology Co., Ltd Web: www.greatwaytech.com Contents 1.0 Project Description 2.0 Project Schedule
More informationINSTALLATION MANUAL FT-FOTR-1VDE-ST-S
INSTALLATION MANUAL FT-FOTR-1VDE-ST-S 1-Channel Digital Duplex Baseband Video Transmitter and Receiver With Reverse Data Transmission & Ethernet Transmission v1.0 4/5/11 1 PACKAGE CONTENTS This package
More informationFibre Optic Modem ODW-622
Fibre Optic Modem ODW-622 RS-232 to fibre optic link, redundant ring or multidrop applications The ODW-622 can be used to create either redundant ring or multidrop solutions for devices with RS-232 interfaces.
More informationI N S T R U C T I O N D A T A
I N S T R U C T I O N D A T A RFL (C37.94) Fiber Service Unit Single Mode 108015-1 RS-449 108015-2 V.35 108015-3 G.703 108015-4 X.21 108015-5 E1 Multimode 107460-1 RS-449 107460-2 V.35 107460-3 G.703 107460-4
More informationAccessories EXP1 - cards to 19 rack extending the number of 1Vpp outputs to 3 at one-input cards
BREAK-TW-V.4/4, BREAK--V.4/4 BOX DIN RACK IP56 Optoconverters are designed to transfer videosignal and or data. I FM modulation I AGC optical loss I Universal for MM and SM fibres I Up to 3 independent
More informationOptical Perfection. HIGHYAG Beam Delivery Products
Optical Perfection HIGHYAG Beam Delivery Products At a Glance HIGHYAG Beam Delivery Products HIGHYAG beam delivery products for 1 µ lasers - from the beam launching unit at the laser via the laser light
More informationHDMI Over Single Coax Extender
HDMI Over Single Coax Extender HDMIRG6 User Manual Transmitter Receiver www.pro2.com.au Notice PRO2 reserves the right to make changes in the hardware, packaging and any accompanying documentation without
More informationSECTION 4 TABLE OF CONTENTS
Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for
More informationDATA SHEET. Two (2) fibers Detachable HDMI 2.0 Extender,
DATA SHEET Two (2) fibers Detachable HDMI 2.0 Extender, HDFX-300-TR Contents Description Features Applications Technical Specifications Operating Conditions Drawing of Module Drawing of Cable Connection
More informationPSI-MOS-RS232/FO 850 E Serial to Fiber Converter
PSI-MOS-RS232/FO 850 E Serial to Fiber Converter perle.com/products/serial-fiber-converters/psi-mos-rs232-fo850e-rs232-to-fiber.shtml Connect RS232 devices to fiber optic cable Extend serial data up to
More informationFiber Optic Testing. The FOA Reference for Fiber Optics Fiber Optic Testing. Rev. 1/31/17 Page 1 of 12
Fiber Optic Testing Testing is used to evaluate the performance of fiber optic components, cable plants and systems. As the components like fiber, connectors, splices, LED or laser sources, detectors and
More informationODW-621. RS-232 Point-to-point applications
Re-timing Data rate up to 250 kbit/s 9-position D-sub connector Redundant power supply inputs Status interface for fault indication Fibre link fault indication (Red) Design for harsh environments 40 to
More informationSEL-3405 High-Accuracy IRIG-B Fiber-Optic Transceiver
SEL-3405 High-Accuracy IRIG-B Fiber-Optic Transceiver Accurate IRIG-B Over Fiber Optics Major Features and Benefits The SEL-3405 High-Accuracy IRIG-B Fiber-Optic Transceiver can send high-accuracy demodulated
More informationOperating instructions Through-beam sensor. OJ51xx / / 2004
Operating instructions Through-beam sensor OJ5xx UK 7098 / 0 07 / 004 Contents Function and features... Installation... Installation of the supplied mounting fixture...4 Electrical connection...4 Setting
More informationViaLiteHD Fibre Optic Green OEM Link Modules
VIALITEHD-GREEN-OEM-LINK-HB-1 HANDBOOK ViaLiteHD Fibre Optic Green OEM Link Modules User Manual HD-Green-OEM-Link-HB-1 Handbook.docx CR3567 24/01/17 Pulse Power & Measurement Ltd, 65 Shrivenham Hundred
More informationSCdefault. 900 Installation instructions. Accessories Part No. Group Date Instruction Part No. Replaces :36-29 Sep
SCdefault 900 Installation instructions SITdefault Upgrade to Premium 300 sound system MONTERINGSANVISNING INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG INSTRUCTIONS DE MONTAGE Accessories Part No. Group
More informationUser Manual Entry Line Industrial Fast Ethernet Switch 4x 10/100Base-TX, 1x 100Base-X Fiber Port 4x PoE+ up to 30W
User Manual Entry Line Industrial Fast Ethernet Switch 4x 10/100Base-TX, 1x 100Base-X Fiber Port 4x PoE+ up to 30W Entry Line Fast Ethernet Switch Fast Ethernet Switch with PoE+ for Industrial Use Page
More informationUser Manual CXE800. Fibre Optic Receiver. CXX Series. Teleste Corporation
Broadband Cable Networks August 30, 2007 1(8) CXX Series User Manual Teleste Corporation CXE800 Fibre Optic Receiver Broadband Cable Networks August 30, 2007 2(8) Introduction The CXE800 is a unidirectional,
More informationMediaCento IPX 4K. Product Data Sheet VX-HDMI-4KIP-TX VX-HDMI-4KIP-RX. Overview. Basic Features blackbox.com
VX-HDMI-4KIP-TX VX-HDMI-4KIP-RX Product Data Sheet MediaCento IPX 4K Overview The MediaCento IPX 4K extends HDMI, USB, Audio, RS-232, and IR over IP via CATx or single-mode fiberoptic cable. The extender
More informationGigabit Multi-mode SX to Single Mode LX Converter. User s Manual NGF-728 Series. Warning COPYRIGHT
COPYRIGHT Gigabit Multi-mode SX to Single Mode LX Converter User s Manual NGF-728 Series All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted
More informationIndustrial 10/100 Base-TX to 100 Base-FX Media Converter NS-200AFC-T/NS-200AFCS-T/NS-200AFCS-60T +12 ~ +48
NS-200AF Series Industrial 0/00 Base-TX to 00 Base-FX Media Converter NS-200AFC-T/NS-200AFCS-T/NS-200AFCS-60T NS-200AFT-T 00Base-FX e F -30 ~ +75 +2 ~ +8 LAN x x Fiber Optic Features C C Temperature Automatic
More informationDATA SHEET. Two (2) fibers Detachable DisplayPort 1.2 Extender, DPFX-200-TR
DATA SHEET Two (2) fibers Detachable DisplayPort 1.2 Extender, DPFX-200-TR Contents Description Features Applications Technical Specifications Connection with DPAX Operating Conditions Drawing of Module
More informationFiber Optic Transmission Systems
TM Fiber Optic Transmission Systems SHORT FORM CATALOG For cost-effective, interference-free transmission of analog and digital signals by means of modern optical technology. Since 1977 the people of Liteway
More informationInstallation. Step 1 Carefully unpack the package contents.
Installation Important: Please follow the installation procedure below. Improper operation may result if the start-up sequence is not correctly followed. Step 1 Carefully unpack the package contents. Step
More informationIQORXD Dual-Channel Multimode Fibre Optic Receiver for SDI
Dual-Channel Multimode Fibre Optic Receiver for SDI CC Module Description The is a dual-channel fibre optic receiver for SDI. The unit takes two Multi-Mode optical inputs in accordance with SMPTE 297M
More informationOptical Fiber Link, 0.1~ 20 GHz RF Over Fiber, I-IFLRF12
Fiber Link, 0.1~ 20 GHz RF Over Fiber, I-IFLRF12 Our I-IFLRF20 series is a wideband RF over fiber link that provides optical transport of RF signals in radars, satcom, EW/ECM and other antenna remoting
More informationOPTICAL DISTRIBUTION STATION -
optical distribution station is a high performance, four individual outputs node. With high output levels and performance to 862MHz, it provides an ideal platform for support of the evolving technologies
More informationDATA SHEET. Four (4) fibers Detachable HDMI Extender, HDFX-150-TR
DATA SHEET Four (4) fibers Detachable HDMI Extender, HDFX-150-TR Contents Description Features Applications Technical Specifications Absolute Maximum Ratings Operating Conditions Drawing of Module Drawing
More informationIQOTXD Dual-Channel Multimode Fibre Optic Transmitter for SDI
Dual-Channel Multimode Fibre Optic Transmitter for SDI CC Module Description The is a dual-channel multimode fibre optic transmitter for SDI. The unit takes two inputs of SDI at 270 Mbits/s and provides
More informationVideo Digital Optical Converter
Video Digital Optical Converter Model : W-VD1 AD Model : W-VD2 AD Model : W-VD4 AD Model : W-VD8 AD Video Digital Optical Converter adopt the advanced international digital video and optical fiber transmission
More informationFOM-9010, FOM-9011 and FOM-9012
Control and Alarm Voltage sense, open collector, or contact inputs Features: FOM-00: Voltage Sense, Open Collector, or Dry Contact Inputs. State Detection for TIA-, TIA-, and TTL Signals. FOM-0: SPDT Form
More informationMiniature Synchronous/Asynchronous Fiber Optic Modems
SEPTEMBER 003 ME1570A-FST Miniature Synchronous/Asynchronous Fiber Optic Modems CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 74-746-5500) FREE technical
More information3M 8900 Single-mode SC Crimplok Connector
3M 8900 Single-mode SC Crimplok Connector Technical Report June 1999 80-6110-1441-8 1 1.0 Product Description & Requirements The 3M SC Single-mode Crimplok Connector is designed to provide the customer
More information3G-SDI Extender via Single Mode Fiber LC Simplex Connector Extends 3G-SDI Link Up To 20 Kilo Meters
Description 3G-SDI (3G Serial Digital Interface) recently has become increasingly popular in the application of video and audio transmission system. However, the traditional copper wire cable imposes limits
More informationSingle mode 9/125µm, duplex
Fiber Converter Module RS-232 MICROSENS General For the connection of devices, control units and machine controls with standard serial interfaces MICROSENS is offering special fiber converters for the
More informationPerle Fast Ethernet Fiber to Fiber Media Converter Module. Installation Guide. P/N (Rev D)
Perle Fast Ethernet Fiber to Fiber Media Converter Module Installation Guide C-100MM-XXXXX CM-100MM-XXXXX Unmanaged Module Managed Module P/N 5500313-10 (Rev D) Overview This document contains instructions
More information1550 nm TX / 1310 nm RX / 3 Gb/s Medium Power 1-Fibre SM Video SFP Transceiver
1550 nm TX / 1310 nm RX / 3 Gb/s Medium Power 1-Fibre SM Video SFP Transceiver (RoHS Compliant) **********************************************************************************************************************************************************************
More informationOPTICAL FIBRE CABLE NETWORK 2004/1
OPTICAL FIBRE CABLE NETWORK 2004/1 HELKAMA OPTICAL FIBRE CABLES Cabled optical fibre characteristics OS1 singlemode fibre SM ITU-T G.652 Mode field diameter 1310nm 9.3+/-0.5µm Mode field eccentricity 1.0
More informationOTFOA-25XX SERIES ERBIUM-DOPED FIBER AMPLIFIER (EDFA)
OTFOA-25XX SERIES ERBIUM-DOPED FIBER AMPLIFIER (EDFA) With Mid-stage Access Operating Manual TEL: (209) 586-1022 USA: (800) 545-1022 FAX: (209) 586-1026 E-Mail: salessupport@olsontech.com www.olsontech.com
More informationCC-Link IE Controller Network Compatible. CC-Link IE Controller Network Recommended Network Wiring Parts Test Specifications
Model Title CC-Link IE Controller Network Compatible CC-Link IE Controller Network Recommended Network Wiring Parts Specifications Management number: BAP-C0401-028-A CC-Link Partner Association (1/31)
More informationDescription. Features MODEL ODN2P OPTICAL DISTRIBUTION NODE WITH TWO AMPLIFIED RF PORTS LIGHT LINK SERIES 2.
MODEL ODN2P OPTICAL DISTRIBUTION NODE WITH TWO AMPLIFIED RF PORTS LIGHT LINK SERIES 2 Description Features The Light LinkB B Series 2 Optical distribution node with two amplified RF ports (ODN2P) has been
More informationOperating Manual. 50mW C-Band EDFA with GPIB and RS232 Interface
Fibotec Fiberoptics GmbH Herpfer Str. 40 98617 Meiningen Germany Tel. +49 3693 8813-200 Fax. +49 3693 8813-201 www.fibotec.com Operating Manual 50mW C-Band EDFA with GPIB and RS232 Interface (Version 1.1
More informationGenerator protection relay
Page 1 Issued: April 1999 Status: New Data subject to change without notice Features Off-the-shelf generator protection relay for small and medium sized power generators Three-phase time overcurrent and
More informationMBUS 10 RS232 TO MBUS LEVEL CONVERTER
Media and protocol converters MBUS 10 RS232 TO MBUS LEVEL CONVERTER RS232 to MBus level conversion Maximum 10 MBus slaves Baud Rate: 300 to 19200 bps RS232 MBus opto isolation Over-current and short-circuit
More informationSelection of a cable depends on functions such as The material Singlemode or multimode Step or graded index Wave length of the transmitter
Fibre Optic Communications The greatest advantage of fibre cable is that it is completely insensitive to electrical and magnetic disturbances. It is therefore ideal for harsh industrial environments. It
More informationABB EQmatic Energy Analyzer, M-Bus QA/S , 2CDG110226R0011, QA/S , 2CDG110227R0011
Technical data 2CDC512091D0201 ABB EQmatic Description of product QA/S 3.xx.1 are modular DIN Rail components (MDRC) Pro M design for installation in distribution boards on a 35 mm mounting rail. They
More informationCABLE TV on fiber. CABLE TV FIBERLINK Pass 100+ TV channels on 1 SingleMode fiber with no need for amps
#FBS-870R-WALL-econ Reasonable prices, priceless reasoning. CABLE TV on fiber CABLE TV FIBERLINK Pass 100+ TV channels on 1 fiber with no need for amps Combine dozens of analog and digital channels in
More informationOption TELCO / RJ-45 The converter is available either with twelve RJ45 jacks or one TELCO connector on the 10Base-T side.
Media Converter 12 port 10Base-FL/10Base-T TELCO /RJ-45 MS416700 /1 MS416704 /7 MICROSENS Features The MICROSENS 12 Port Ethernet Media Converter enables the direct repeaterless coupling of twisted pair
More informationDVO700 P FIBRE OPTIC TRANSMITTER
Timo Rantanen September 24, 2002 1(5) FIBRE OPTIC TRANSMITTER is a high performance, extremely linear externally modulated 1550 nm transmitter for DVO fibre optic CATV link. This transmitter type has been
More informationDATA SHEET. Two (2) fibers Detachable DisplayPort Extender, DPFX-100-TR
DATA SHEET Two (2) fibers Detachable DisplayPort Extender, DPFX-100-TR Contents Description Features Applications Technical Specifications Operating Conditions Drawing of Module Drawing of Cable Connection
More informationData Sheet GU-LCT-RY-V1-10 GU-LCT-RY-V1-11
Data Sheet GU-LCT-RY-V1-10 Part No.: AA-10276-001 Optical Input / Output: Glass Fibre GU-LCT-RY-V1-11 Part No.: AA-10276-002 Optical Input / Output: Plastic (POF) Picture shows AA-10276-001 (Glass Fibre)
More informationOperating instructions Through-beam sensor. OJ51xx laser / / 2010
Operating instructions Through-beam sensor OJ5xx laser 70480 / 00 05 / 200 Contents Preliminary note. Symbols used 2 Safety instructions Functions and features 4 4 Installation 4 5 Electrical connection5
More informationModel GS Port Node 1 GHz with 65/86 MHz split
Model GS7000 4-Port Node 1 GHz with 65/86 MHz split The Model GS7000 4-Port Node is our latest generation 1 GHz optical node platform and utilizes a completely new housing designed for optimal heat dissipation.
More informationOPERATOR MANUAL OSD351 FIBRE OPTIC CCTV TRANSMITTER CARD
OPERATOR MANUAL OSD351 FIBRE OPTIC CCTV TRANSMITTER CARD OSD351 FIBRE OPTIC CCTV TRANSMITTER CARD Document No:10103701 PAGE 2 C O N T E N T S 1. TECHNICAL SUMMARY...4 1.1 BRIEF DESCRIPTION...4 1.2 TECHNICAL
More informationXCOM1002JE (8602JE) Optical Receiver Manual
XCOM1002JE (8602JE) Optical Receiver Manual - 2 - 1. Product Summary XCOM1002JE (8602JE) outdoor optical receiver is our latest 1GHz optical receiver. With wide range receiving optical power, high output
More informationFibre Channel Fiber-to-Fiber Media Converters
Fibre Channel Fiber-to-Fiber Media Converters CN-155-XX CN-131-XX Multi-mode to Single-mode series Single-mode to Single-mode series Low cost CCN-2000 Fibre Channel media converter modules by Canary Communications
More informationL-BAND over Fiber Link TX/RX. User Manual. L-1Ch-L-Band-TX/RX
L-BAND over Fiber Link TX/RX User Manual L-1Ch-L-Band-TX/RX 1 Contents Chapter 1. Introduction... 2 1.1 Overview...2 1.2 Feature...2 1.3 Application...3 Chapter 2. Technical Specification... 4 2 Chapter
More informationModel FS-4608R. Features. Overview
Model FS-4608R Features 8-Channel Active Video Receiver Hub(dual video output) Full-motion color video signal up to 3936ft(1200m) via UTP cat5e/6 NTSC, PAL & SECAM video format compatible Real-time transmission
More informationWe will look first at the cable, and then the transceivers (which act as both transmitter and receiver on each end of the fiber cable).
Nuclear Sensors & Process Instrumentation Fiber Cable Basics Fiber-optic communication is a method of transmitting information from one place to another by sending light through an optical fiber. The light
More informationIndustriefunkuhren. Technical Manual. Model 7248/7248RC. Fibre Optic Converter Board ENGLISH
Industriefunkuhren Technical Manual Fibre Optic Converter Board Model 7248/7248RC ENGLISH Version: 01.00-04.05.2007 2 / 16 7248/7248RC Fiber Optic Converter Board - V01.00 INPORTANT NOTES Downloading Technical
More informationHighBand 25. TrueNet Category 6 Solutions
HighBand 25 TrueNet Category 6 Solutions The highest performing cross-connect system in the world. A unique high-density solution with superior cable management. ADC KRONE s HighBand 25 cross connect solution
More informationSERCOS TSX CSY 84 Module V
SERCOS TSX CSY 84 Module V At a Glance Aim of this Part What's in this part? This part presents the SERCOS TSX CSY 84 module, its operating features and its installation. This Part contains the following
More informationCisco ONS Exposed Faceplate Mux/Demux 48-Channel Extended Bandwidth Patch Panel and Splitter Coupler Module
Cisco ONS 15216 Exposed Faceplate Mux/Demux 48- Extended Bandwidth Patch Panel and Splitter Coupler Module Product Overview The Cisco ONS 15216 Exposed Faceplate Mux/Demux 48- Extended Bandwidth Patch
More information8000 Plus Series Safety Light Curtain Installation Sheet ( CD206A/ CD206B )
SMARTSCAN 8000 PLUS LIGHT CURTAIN 1 Unpacking 8000 Plus Series Safety Light Curtain Installation Sheet ( CD206A/0160306 CD206B160306 ) Remove all packaging material and retain it Locate and keep the delivery
More informationVersiVision. FVTMHA0xA / FVRMHA0xA 16-CHANNEL DIGITALLY ENCODED VIDEO 1-CHANNEL BI-DIRECTIONAL DATA MULTIPLEXER USER S MANUAL.
VersiVision FVTMHA0xA / FVRMHA0xA 16-CHANNEL DIGITALLY ENCODED VIDEO 1-CHANNEL BI-DIRECTIONAL DATA MULTIPLEXER USER S MANUAL Revision B April 2013 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702
More informationDisplayPort Extender over 2 LC Fibers
DisplayPort Extender over 2 LC Fibers Audio 3GSDI Embedder EXT-DP-CP-2FO User Manual Release A2 DisplayPort Extender over 2 LC Fibers Important Safety Instructions 1. Read these instructions. 2. Keep these
More informationE3/DS3 Fibre Extender
User Manual E3/DS3 Fibre Extender Black Box Network Services 464 Basingstoke Road, Reading, Berkshire, RG2 0BG Tech: 0118 965 6000 www.blackbox.co.uk CONTENTS 1 Introduction 1 1.1 About the products 1
More informationFOM-1090 FOM-1090 FOM FOM-1090 w/ DB-25 Female FOM-1091 w/ DB-25 Male
Serial Data Communications Synchronous, Asynchronous or Isochronous Signal rates: DC to 20 MHz FOM-1090 w/ DB-25 Female FOM-1091 w/ DB-25 Male Supported Interface Standards TIA-530, TIA-530A TIA-232 TIA-574
More informationUser s Manual. Digital Media Converter Package Part #: DL-HDCAT-WP
User s Manual Digital Media Converter Package Part #: DL-HDCAT-WP TABLE OF CONTENTS 1-1 Table of Contents 1-2 Welcome and Safety Notes 1-3 Product Description and General Specifications 1-4 Environmental
More informationTRFM Series RF Amplifier Module
Doc. 2272065, Rev. C TIARRA Optical Node TRFM Series RF Amplifier Module Contents Equipment Description... 39 Model Names... 41 Functional Description... 43 Return RF Signal Flow... 45 Controls and Connectors...
More informationCisco GS7000 High-Output 4-Way Segmentable Node with 42/54 Split
Data Sheet Cisco GS7000 High-Output 4-Way Segmentable Node with 42/54 MHz Split The Cisco GS7000 High-Output Segmentable Node with 42/54 MHz Split is the latest-generation 1-GHz optical node platform designed
More informationCisco 1.25 GHz Surge-Gap Passives
Data Sheet Cisco 1.25 GHz Surge-Gap Passives The Cisco 1.2 GHz Surge-Gap Passives product line is the latest evolution of the HFC network providing full support of the DOCSIS 3.1 standard. DOSCIS 3.1 support
More informationAmplifier for fiber optics. Dimensioned drawing
Amplifier for fiber optics Dimensioned drawing up to 525mm up to 120mm 10-30 V DC 3-digit display for indicating and setting the switching threshold NEW: AutoSet function for easy sensor adjustment Menu
More informationModel OTDV Broadcast Transport Links OPERATING MANUAL
Model OTDV-1250 Broadcast Transport Links OPERATING MANUAL 24926 Highway 108 Sierra Village, CA 95346 Phone: (800) 545-1022 Fax: (209 586-1022 Rev. X5 E-Mail: sales@olsontech.com 02/23/10 Table of Contents
More informationSynchronous Fiber Optic Modem
JULY 1993 MD630A-F MD630A-M MD630A-FST MD630A-MST Synchronous Fiber Optic Modem SFOM CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE
More informationFiberLink 3500 Series Transceivers
MANUAL FiberLink 3500 Series Transceivers 2 or 4 Channel 3G/HD/SD-SDI Transmission over one or two single mode or multimode fibers Installation and Operations Manual WWW.ARTEL.COM Contents Contents Welcome...
More informationRFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH
1 1 9.41 115 0 Pretium EDGE 143 RFP LC Uniboot to RFP LC Uniboot Patch Pretium EDGE Solutions jumpers are integrated reverse -polarity uniboot duplex assemblies that meet the high -density space requirements
More informationLED Driver Compact fixed output
Driver LC 45W 1050mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 1,050 ma output power 45 W Nominal life-time up to 50,000
More informationEmergency lighting units EM powerled
CE CPS 12/15 W ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation
More informationCompact Mini Amplifiers Series and Series
RF-Electronics Compact Mini Amplifiers 93188 Series and 93198 Series Description The Scientific-Atlanta Compact Mini Amplifiers type 93188 and 93198 are small, cost-effective RF amplifiers that address
More informationVersiVision. FVTM4BCxA-CE / FVRM4BCxA-CE MULTIPLEXER SYSTEM 4-CHANNELS DIGITALLY ENCODED VIDEO 2-CHANNELS BI-DIRECTIONAL DATA
VersiVision FVTM4BCxA-CE / FVRM4BCxA-CE MULTIPLEXER SYSTEM 4-CHANNELS DIGITALLY ENCODED VIDEO 2-CHANNELS BI-DIRECTIONAL DATA 4-CHANNELS BI-DIRECTIONAL AUDIO 4-CHANNELS BI-DIRECTIONAL CONTACT CLOSURE 1-CHANNEL
More informationFiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements
NO: PH-165 PRODUCT: E3S-X3, E3X-NL, E3X-NM DATE: August 2012 TYPE: Discontinuation Update Fiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements Affected
More informationFiberLink 3350 Series
MANUAL FiberLink 3350 Series 3G/HD/SD-SDI Transmission over one single mode or multimode fiber Installation and Operations Manual WWW.ARTEL.COM Contents Contents Welcome....3 Features....3 Package Contents....3
More informationMTI-2100 FOTONIC SENSOR. High resolution, non-contact. measurement of vibration. and displacement
A worldwide leader in precision measurement solutions MTI-2100 FOTONIC SENSOR High resolution, non-contact measurement of vibration and displacement MTI-2100 Fotonic TM Sensor Unmatched Resolution and
More information