IH22V02E. 22" IPTV Hotel Series

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "IH22V02E. 22" IPTV Hotel Series"

Transcription

1 22" IPTV Hotel Series

2 GENERALE VIDEO AUDIO Mărimea 22" Iesire audio 2 x 2.5W Cabinetul nr Speaker invizibil Ramă VNB Egalizator (5 benzi) Rezoluţie FULL-HD Sunet ambiental Tip E-LED Decodor Dolby Multistream MS11 Raportul dinamic al contrastului 100,000:1 Pârghie de volum automat (AVL) Aspect Ratio 16:9 Luminozitatea (cd / m2) 300 Unghi de vedere 178º (H) / 178º (V) CTI/LTI Producția de zgomote digitale contrastul dinamic Scanare progresivă CONEXIUNI DIMENSIUNI RF IN Dimensiuni fără suport (mm) (LxLxH) 317x35x516 SCART Dimensiuni w / Stand (mm) (HxDxW) 352x134x516 Compozit în Greutate fără suport (kg) 2.8 VGA (PC In: D-sub15) (1) Greutate w / Stand (kg) 3 HDMI (2) HDCP (1.2) Exit audio digital Coaxial Exit căști USB (1) CI+ Only RF LAN - Ethernet Wi-Fi Miracast WIDI DLNA RS232 via Scart Upgrade de firmware via USB SW Update via USB & LAN PUTERE CARACTERISTICI Tensiune, HZ V AC 50Hz Software-ul Digiguest Consumul de energie (tipic) 30W Hybrid Stream (Tuner+IP) Consum de energie (Max) 45W Servicii de informare Așteptare 0.5W< Servicii hoteliere Gestionarea listei de canale Moduri de tunere acceptate DVB-T2/C/S2 Codarea video HEVC Integrarea serverului IPTV server, VOD/MOD Server, PMS Server, DRM Server Integrarea PMS Fidelio, Opera, OnQ, AmonRA Soluție autonomă bazată pe HTML via Deluxe+ Afișarea canalului inteligent via Deluxe+ Sortarea automată a programelor Mesaj de întâmpinare (imagine splash) USB Clonarea Activați / dezactivați meniurile de instalare Codul multi-ir Auto TV Oprit / Sleep automat Sistem antifurt pentru baterii Wake-up Alarm / Sleep Timer USB Media Player Centrul inteligent Modul de economisire a energiei (economie de energie) Teletext Ghid electronic de programe EPG Timeline Schedule Economie de energie Conformitate RoHS, WEEE Compatibilă cu VESA M4 75x75 Set de suspendare pe perete Suport pivotant 19980

3 TESTING STANDARDS The measurement should be executed in a stable, windless and dark room 60min after lighting the back light at the given temperature for stabilization of the back light. This should be measured in the center of screen. Environment condition: Ta = 25 ± 2 C. Definition of Test Points: Note (1) Definition of Contrast Ratio (C/R): Ratio of gray max (Gmax) & gray min (Gmin) at the center point (5) the panel Gmax: Luminance with all pixels white Gmin: Luminance with all pixels black

4 Note (2) Definition of Response Time: TR + TF Note (3)Definition of 9 points brightness uniformity: (Test pattern: Full White) Bmax: Maximum brightness Bmin: Minimum brightness Note (4) Definition of Luminance of White: Luminance of white at center point 5 Note (5) Definition of White Color Chromaticity: Color coordinates of White at center point 5 Note (6) Definition of Viewing Angle Viewing angle range (C/R > 10)

5 Safety IEC : 2005+A1:2009 EN : 2006+A11: 2009+A12:2011 EMC Immunity Tests Specification Description EN 55024:2010 Immunity EN :2009 Electrostatic Discharge (ESD) EN :2006+A2:2010 Radiated, radio-frequency, electromagnetic field immunity EN :2004+A1:2010 Electrical Fast Transient/Burst Immunity EN :2006 Surge EN :2009 Conducted Disturbances Induced by Radio-Frequency Fields EN :2004 Voltage Dips and Short Interruptions Emission Tests Specification Description Disturbance Voltage at the Mains Terminals (Conducted Emission) Disturbance Voltage at the Telecommunication Terminals (Conducted Emission) Field Strength (Radiated Emission) (1GHz-6GHz) Field Strength (Radiated Emission) (30MHz-1GHz) EN :2006+A1:2009+A2:2009 Harmonics EN :2008 Flicker Note EN , EN , EN , EN , EN , EN and EN are basic standards referred from EN According to EN 55024, EN Power Frequency Magnetic Field test is not performed since the EUT is not sensitive power frequency magnetic field.

6 EN Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility V1.9.2 (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN V2.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems Reliability Test Standards Low Temperature Test Products must be boot up without any delay more than one minute. No abnormality on operation. There mustn t come out any electrical and functional problems. Temperature: -15 C, Humidity: 50%, Duration: 24 hours, Mode of Operation: Power Off High Temperature Test After the test, product should work properly as electrical and mechanically. No software crash, No hang up, No lock up. Temperature: 50 C, Humidity: 90%, Duration: 72 hours, Mode of Operation: 3D Mark 2011 Life Test After the test Product should work properly as electrically and mechanically. No software crash, No hang up, No lock up. Temperature: 35 C, Humidity: 50%, Duration: 150 hours, Mode of Operation: 3D Mark 2011

7 Drop Test Product should work properly and there mustn t be any crack at the cabin or any cosmetic problem. In addition, there mustn t be any major problem at the product packaging and snow boxes. Dropping height: Face 3 (Bottom surface): 55cm, Other surfaces: 40cm Temperature: 25 ± 2 C, Humidity: 45% ± 10 Vibration Test Product should work properly and there mustn t be any crack at the cabin, at the solder points of chassis, at the pins of components. In addition, there mustn t be any major problem at the product packaging and snow boxes. Direction of Frequency of Power Spectral Vibration Vibration Density Z 10Hz 500Hz 0.002G2/Hz Sweep Time Total Duration 10min 60min Acceleration 1Grms(9.81m/s2)