A.LEDA B-EYE K10 CC A.LEDA B-EYE K20 CC

Size: px
Start display at page:

Download "A.LEDA B-EYE K10 CC A.LEDA B-EYE K20 CC"

Transcription

1 ENGLISH A.LEDA BEYE K CC A.LEDA BEYE K CC C648 C64 INSTRUCTION MANUAL PRELIMINARY Page INDEX Contents Safety information Unpacking and preparation Installation and startup Control panel Menu setting Maintenance Cause and solution of problems Technical information Channel functions Congratulations on choosing a Clay Paky product! We thank you for your custom. Please note that this product, as all the others in the rich Clay Paky range, has been designed and made with total quality to ensure excellent performance and best meet your expectations and requirements. Carefully read this instruction manual in its entirety and keep it safe for future reference. It is essential to know the information and comply with the instructions given in this manual to ensure the fitting is installed, used and serviced correctly and safely. CLAY PAKY S.p.A. disclaims all liability for damage to the fitting or to other property or persons deriving from installation, use and maintenance that have not been carried out in conformity with this instruction manual, which must always accompany the fitting. CLAY PAKY S.p.A. reserves the right to modify the characteristics stated in this instruction manual at any time and without prior notice.

2 SAFETY INFORMATION LED. Installation Make sure all parts for fixing the projector are in a good state of repair. Make sure the point of anchorage is stable before positioning the projector. The safety chain must be properly hooked onto the fitting and secured to the framework, so that, if the primary support system fails, the fitting falls as little as possible. If the safety chain gets used, it needs to be replaced with a genuine spare. Minimum distance of illuminated objects The projector needs to be positioned so that the objects hit by the beam of light are at least. metres (8 ) from the lens of the projector. Minimum distance from flammable materials The projector must be positioned so that any flammable materials are at least. metres (8 ) from every point on the surface of the fitting. Mounting surfaces It is permissible to mount the fitting on normally flammable surfaces. Maximum ambient temperature Do not operate the fixture if the ambient temperature (Ta) exceeds 4 C (4 F). IP IP protection rating The fitting is protected against penetration by solid bodies of over mm (.47 ) in diameter (first digit ), but not against dripping water, rain, splashes or jets of water (second digit ). Protection against electrical shock Connection must be made to a power supply system fitted with efficient earthing (Class I appliance according to standard EN 6598). It is, moreover, recommended to protect the supply lines of the projectors from indirect contact and/or shorting to earth by using appropriately sized residual current devices. Connection to mains supply Connection to the electricity mains must be carried out by a qualified electrical installer. Check that the mains frequency and voltage correspond to those for which the projector is designed as given on the electrical data label. This label also gives the input power to which you need to refer to evaluate the maximum number of fittings to connect to the electricity line, in order to avoid overloading. t c 9 C Temperature of the external surface The maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state, is 9 C (94 F). Maintenance Before starting any maintenance work or cleaning the projector, cut off power from the mains supply. Light collimation system This product contains internal light collimation system. Avoid intense light from any angle. LiFePO4 Battery This product contains a rechargeable lithium iron tetraphosphate battery. To preserve the environment, please dispose the battery at the end of its life according to the regulation in force. NOT FOR RESIDENTIAL USE The products to which this manual refers comply with the European Directives pursuant to: 6/95/EC Safety of electrical equipment supplied at low voltage (LVD) 4/8/EC Electromagnetic Compatibility (EMC) /65/EU Restriction of the use of certain hazardous substances (RoHS)

3 Page Contents Control panel Menu setting Maintenance INDEX C648 C64 UNPACKING AND PREPARATION ENGLISH A.LEDA BEYE K CC A.LEDA BEYE K CC ISTJ/ INSTRUCTION MANUAL PRELIMINARY Safety information Unpacking and preparation Installation and startup Optional accessories Technical information Cause and solution of problems Channel functions Congratulations on choosing a Clay Paky product! We thank you for your custom. Please note that this product, as all the others in the rich Clay Paky range, has been designed and made with total quality to ensure excellent performance and best meet your expectations and requirements. Carefully read this instruction manual in its entirety and keep it safe for future reference. It is essential to know the information and comply with the instructions given in this manual to ensure the fitting is installed, used and serviced correctly and safely. CLAY PAKY S.p.A. disclaims all liability for damage to the fitting or to other property or persons deriving from installation, use and maintenance that have not been carried out in conformity with this instruction manual, which must always accompany the fitting. CLAY PAKY S.p.A. reserves the right to modify the characteristics stated in this instruction manual at any time and without prior notice. x 83/85 Packing contents Fig. UNLOCKED LOCKED PAN Mechanism Lock and Release (every 9 ) Fig. 3

4 INSTALLATION AND STARTUP 3 Installing the projector Fig. 3 The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall. WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 54/3 available on request). This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base. 4 3 Connecting and disconnecting power cable Fig. 4 4

5 CONTROL PANEL 5 Mains Connecting to the mains supply Fig. 5 6 DMX 5 5 PIN SCREEN SIGNAL SIGNAL Connecting to the control signal line (DMX) Fig. 6 Use a cable conforming to specifications EIA RS485: pole twisted, shielded, Ohm characteristic impedance, 4 AWG, low capacity. Do not use microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 5pin male/female connectors. A terminating plug must be inserted into the last projector with a resistance of Ohm (minimum /4 W) between terminals and 3. IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the shield braid and to pin of the connectors. 7 Switching on the projector Fig. 7 Press the switch. The projector starts resetting the effects. At the same time, the following information scrolls on the display: Model Firmware xxx (Fixture ID) System errors A.leda BEYE Version X.X.X Dmx Address xxx E:... CC Date Hour W:... On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the Home position (Pan 5% Tilt 5%). The control panel (Fig. 7) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two conditions: rest status and setting status. When it is in the rest status, the display shows the projector s DMX address and the Fixture ID address (if set). During menu setting status, after a wait time (about 3 seconds) without any key having been pressed, the display automatically returns to rest status. It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the F key will be cancelled. 5 Continue

6 8 Reversal of the display Fig. 8 To activate this function, press UP B and DOWNCkeys simultaneously while the display is in the rest mode. This status will be memorised and maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again. Setting the projector starting address On each projector, the starting address must be set for the control signal (addresses from to 5). The address can also be set with the projector switched off. Setting the address: see pag. 8. Setting the projector Fixture ID On each projector, the Fixture ID address must be set for an easy identification of the fixtures in an installation (ID from to 55). The Fixture ID address can be set with the projector switched off. Setting the Fixture ID: see pag. 8. Functions of the buttons Using the menu F Confirms the displayed value, or activates the displayed function, or enters the successive menu. CDOWN Decreases the value displayed (with autorepetitions) or passes to the next item in the menu. BUP Increases the value displayed (with autorepetitions) or passes to the previous item in a menu. DLEFT Return to the top level. Commute from units, tens, hundreds, in the "Address", "Fixture ID" and "Calibration" menù. ERIGHT USING THE MENU: ) Press F once Main Menu appears on the display. ) Use the UP B and DOWN C keys to select the menu to be used: Setup (Setup Menu): To set the setting options. Option (Option Menu): To set the operating options Informations (Informations Menu): To read the counters, software version and other information. Manual Control (Manual control Menu): To trigger the test and manual control functions. Test (Test Menu): To check the proper functionning of effects Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel. To enable the "Advanced" see pag.3 3) Press F to display the first item in the selected menu. 4) Use the UP B and DOWN C keys to select the MENU items. Setting addresses and options with the projector disconnected The projector s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply. All that is needed is to press F to momentarily activate the display and thus access the settings. Once the required operations have been carried out, the display will switch off again after a wait time of 3 seconds. 6

7 MENU SETTING 3 Set Up Dmx Address Option Pan / Tilt Invert Pan Information System Errors Fixture ID Invert Tilt Fixture Hours Option Silent Mode Swap PanTilt Encoder PanTilt Standard Led Energy tot System Version Information Manual Control Test Advanced Dimmer cutoff Display Special Functions Quiet Pan/Tilt speed Dimmer curve Board Diagnost. Dmx Monitor Fans Monitor RDM Device UID RGB Gamma Halogen Mode Setting Default Preset User Preset User Preset User Preset Manual Control Reset Test Pan / Tilt Advanced Access code 34 Channel Colour Zoom All Upload Aleda Firmware Setup Model Calibration 7 Continue

8 NOTE: On grey the default options Set Up Dmx Address Address xxx SET UP MENU DMX ADDRESS NOTE: without the DMX signal the Address (XXX) flashing Allows you to select the DMX ADDRESS. ) Press F the current DMX Adress appear on the display. ) Use the UP B and DOWN C, RIGHT E keys to plan the DMX Address. Fixture ID Value xxx FIXTURE ID Allows you to select the FIXTURE ID. ) Press F the current Fixture ID appear on the display. ) Use the UP B, DOWN C, RIGHT E keys to plan the Fixture ID. OPTIONS MENU Option Pan / Tilt Invert Pan On Off PAN / TILT Invert pan Used for reversing Pan movement. ) Press F the current settings appear on the display (On or Off). ) Use the UP B and DOWN C keys to enable (On) or disable (Off) PAN inversion. Invert Tilt On Off Invert tilt Used for reversing tilt movement. ) Press F the current settings appear on the display (On or Off). ) Use the UP B and DOWN C keys to enable (On) or disable (Off) Tilt inversion. Swap PanTilt On Off Swap PanTilt Used for swapping Pan and Tilt channels (as well as Pan fine and Tilt fine). ) Press F the current settings appear on the display (On or Off). ) Use the UP B and DOWN C keys to enable (On) or disable (Off) Pan and Tilt channel swap. Encoder PanTilt On Off Encoder PanTilt Used for enabling the Pan / Tilt encoders. ) Press F the current settings appear on the display (On or Off). ) Use the UP B and DOWN C keys to enable (On) or disable (Off) Pan / Tilt encoders. Dimmer cutoff DIMMER CUTOFF Used to set a DMX fine value under which the dimmer remains to zero level. ) Press F the current Dimmer cutoff appear on the display. ) Use the UP Band DOWN C, RIGHT E keys to plan the Dimmer cutoff. Silent mode Standard Quiet SILENT MODE It lets you select the Silent Mode from the two available. ) Press F the current setting appears on the display. ) Use the UP B and DOWN C keys to select one of the following settings: Standard: Maximum speed and consequently maximum effects noise level. Quiet: reduces the speed of some effects, thereby reducing their noise level. 3) Press F to confirm the selection or LEFT D to keep the current setting. Display On Off DISPLAY Used for automatically reduce brightness on the display after about 3 seconds in idle. ) Press F the current settings appear on the display (On or Off). ) Use the UP B and DOWN C keys to enable (On) or disable (Off) the decreasing of display brightness. 8

9 Special Functions Pan / Tilt speed SPECIAL FUNCTIONS Pan / Tilt speed Lets you select two different Pan and Tilt speeds. ) Press F the current setting appears on the display. ) Use the UP B and DOWN C keys to select one of the following settings: Normal Fast 3) Press F to confirm the selection or LEFT D to keep current settings. Dimmer Curve Dimmer Curve Lets you select four different Dimmer channel curves. ) Press F the current setting appears on the display. ) Use the UP B and DOWN C keys to select one of the following settings: Curve Curve Curve 3 Curve 4 RGB Gamma RGB Gamma Lets you select three different RGBW gamma curves. ) Press F the current setting appears on the display. ) Use the UP B and DOWN C keys to select one of the following settings: Gamma. Gamma.5 Gamma. Halogen Mode Halogen Mode Lets you select five different halogen lamp simulations. ) Press F the current setting appears on the display. ) Use the UP B and DOWN C keys to select one of the following settings: Halogen OFF Halogen Lamp Halogen Lamp Halogen Lamp 3 Halogen Lamp 4 Halogen Lamp 5 Setting Default Preset User Preset User Preset User Preset 3 Reset To Dafault Go Back Load Preset Save To Preset Load Preset Save To Preset Load Preset 3 Save To Preset 3 9 SETTING Used to save 3 different settings of the items in the options menu and relative submenus. ) Press F Default preset appears on the display. ) Use the UP B and DOWN C keys to select one of the following configurations: Default preset (*) User preset User preset User Preset 3 3) Press F Load preset X appears on the display. 4) Use the UP B and DOWN C keys to select: Load preset X to recall a previously stored configuration. Save to preset X to store the current configuration. a confirmation message (Are you sure?) appears on the display. 5) Select YES to confirm the selection or NO to keep the current setting and return to the next higher level. (*) DEFAULT PRESET Used for restoring default values on all options menu items and relevant submenus. ) Press F, a confirmation message (Are you sure?) appears on the display. ) Select YES to confirm the selction or NO to keep current setting. OPTION DEFAULT Invert Pan Off Invert Tilt Off Swap PanTilt Off Encoder PanTilt On Silent Mode Standard Display Off Pan/Tilt speed Fast Dimmer Curve Curve RGB Gamma Gamma.5 Halogen Mode Halogen OFF Continue

10 Information System Errors INFORMATION MENU SYSTEM ERRORS Shows a list of warnings and messages relevant to errors occurred since the fixtures switchingon. ) Pressing F you are allowed to reset the SYSTEM ERRORS list. A confirmation message (Are you sure you want to clear error list?) appears on the display. ) Select YES to reset the list or NO to go back. Fixture Hours Total Partial XXX XXX Reset... FIXTURE HOURS Used for displaying projector operating hours (total and partial). ) Press F Hours total and partial appears on the display. Total counter Counts the number of projector working life hours (from manufacture to date). Partial counter Counts the number of partial projector working life hours since the last reset to date. ) Press F to reset partial projector working hours a confirmation message (Are you sure?) appears on the display. 3) Select YES to reset partial projectors counter or NO to keep the current setting and return to the top menu level. LED Energy Tot LED ENERGY TOT Lets you view total LED working hours. ) Press F to display total and partial Watts/hour: Total Total LED working hours from construction to date. Partial LED working hours from last reset to date. ) Press F to reset the partial counter. A confirmation appears on the screen (Are you sure?) 3) Select YES to reset the partial counter or NO to keep the current setting and open the next menu level. System Version Board Fw.rv Hw.rv. CPU boot x.x.x CPU Appl x.x.x x LED drv xx SYSTEM VERSION Used for displaying the software and hardware version of each board installed in the projector. (CPU and LED board). Board Diagnost. Dmx Monitor Board Status Err% Led brd Good. BOARD DIAGNOSTIC Used for displaying the status error of each board installed in the projector: Led board DMX MONITOR Used for displaying the projector DMX channel level in bit (Val) and in percentage (Perc). Fans Monitor Fan PwrSp Head Speed (RPM) XXXX XXXX FANS MONITOR Used for displaying the speed of each fan installed in the projector: PwrSp (fan PSU) Head (fan head) RDM Device UID RDM DEVICE UID Shows the exclusive address of the fixture to use communicate via RDM.

11 MANUAL CONTROL Manual Control Reset No Yes RESET Used for resetting the projector. ) Press F to reset the projectors, a confirmation message (Are you sure?) appears on the display. ) Select YES to starting reset the fixture or NO to keep the current setting and return to the top menu level. Channel CHANNEL Used for setting channel levels from the projector control panel. ) Press F the first channel appears on the display. ) Use the UP B and DOWN C keys to select the required channel: 3) Press F and use the UP B and DOWN C keys to select the required DMX level (value between and 55). 4) Press LEFT D to return to the top menu level. TEST MENU Test PanTilt Colour Zoom All TEST Allows you to check the proper functioning of effects. ) Press F to return to the top menu level. ) Use the UP B and DOWN C keys to select the required test. Test sequence: Pan Tilt effects (Pan & Tilt) Colour effects Zoom All effects ADVANCED MENU Advanced Code 34 To enable the "Advanced Menu" set up the "Access code" (34) using the UP B, DOWN C, RIGHT E keys. Press F "Menu advanced" appears on the display Upload Firmware Transfer the firmware on all the connected fixtures? Are you sure? Yes/No UP LOAD FIRMWARE Allows you to transfer the firmware from fixture to all the connected fixtures. ) Press F, a confirmation message appears on the display. ) Select YES to start the firmware loading or NO to keep the current setting and return to the top menu level Setup Model Changing to a wrong model may damage the fixture. Are you sure? Yes/No SETUP MODEL Allows you to change the default model of projector. ) Press F a confirmation message appears on the display. ) Select YES to define the model of projector or NO to keep the current setting and return to the top menu level. Calibration CALIBRATION Allows you to adjust effects from the control panel to obtain perfect uniformity between the projectors. ) Press F channels appears on the display. ) Using the UP B and DOWN C keys, select the effect you wish to regulate. 3) Press F and use the RIGHT E, UP B and DOWN C buttons to make the adjustment by setting a value between and 55. 4) Press F to confirm the selection or LEFT D to keep current settings and return to the top level. FACTORY DEFAULT Allows you to restore default values of all channels (8). ) Press F a confirmation message appears on the display (Reset calibration to factory default?). ) Select YES to reset calibration to factory default or NO to keep the current setting and return to the top menu level.

12 Light collimation system This product contains internal light collimation system. Avoid intense light from any angle. CAUTION: To avoid damage to the internal parts of the fixture when the fixture is not working, is recommended to turn the head down before turning the fixture off, so that the front lenses of the fixture are invested as little as possible from the sun. Set channel (Zoom) to 55bit before turning off the projector to facilitate the packaging of the projector. To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the working environment (air humidity, presence of dust, salinity, etc.). It is recommended that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations: General cleaning of internal parts. Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Clay Paky. General visual check of the internal components, cabling, mechanical parts, etc. Electrical, photometric and functional checks; eventual repairs. Cleaning the lenses Only use neutral soap and water to clean the lenses, then dry it carefully with a soft, nonabrasive cloth. (WARNING: the use of alcohol or any other detergent could damage the lenses).

13 Battery removal Fig. This product contains a rechargeable lithium iron tetraphosphate battery. To preserve the environment, please dispose the battery at the end of its life according to the regulation in force. LiFePO4 3

14 MAINTENANCE 3 4 Opening the covers Fig. Removing/Assembling the lens unit Fig. 4

15 3 Replacing the line actuator Fig. 3 CAUSE AND SOLUTION OF PROBLEMS THE PROJECTOR WILL NOT SWITCH ON ELECTRONICS NONOPERATIONAL DEFECTIVE PROJECTION REDUCED LUMINOSITY POSSIBLE CAUSES No mains supply. LED exhausted or defective. Signal transmission cable faulty or disconnected. Incorrect addressing. Fault in the electronic circuits. Lenses or reflector broken Dust or grease deposited. Check the power supply voltage. Call an authorised technician. Replace the cables. Check addresses (see instructions). Call an authorised technician. Call an authorised technician. Clean (see instructions). CHECKS AND REMEDIES PROBLEMS 5

16 TECHNICAL INFORMATION A.Leda BEYE K CC Power supplies available 4V 5/6Hz Input power K CC 35VA K CC 55VA LED source Osram Ostar RGBW 5W LED Average LED life: 5. h Motors 5 (k), 6 (k) stepper motors, operating with microsteps, totally microprocessor controlled. Cooling High efficiency diecast aluminium Forced ventilation Inputs DMX 5 Working position Working in any position. 43 (6.93") Zoom OUT 38 (4.96") Zoom IN 5 (9.84") Zoom OUT (7.87") Zoom IN A.Leda BEYE K CC 476 (8.74") 37 (4.57") 46 (8.") Moving head Movement by means of two stepper motors, controlled by microprocessor. Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit. Angle: PAN = 54 TILT = IP protection rating Protected against the entry of solid bodies larger than mm (.47 ). No protection against the entry of liquids. CE Marking Complies with the following European Directives 6/95/EC (LVD) 4/8/EC (EMC) /65/EU (RoHS). 589 (3.9") Weights BEYE K CC: 4.5 kg (3.4 lbs) BEYE K CC: kg (46.3 lbs) 33 (.99") 395 (5.55") 6

17 CHANNEL FUNCTION A.LEDA BEYE K CC A.LEDA BEYE K CC NB: To prevent accidental breakage of the effects, which could collide with each other during transport, before switching the projector OFF check that all the projector Channels have been excluded (DMX bit). CHANNEL CHANNEL MODE Red RedFine Green GreenFine Blue BlueFine White WhiteFine CTO Macro Colour Strobe Dimmer Dimmer fine Pan Pan fine Tilt Tilt fine Function Reset Zoom 7 Continue

18 NOTE: On conclusion of resetting in case of absence of DMX signal, Pan & Tilt move to the "Home" position (Pan 8 bit Tilt 8 bit) all the others channels stay at bit. ( 3 5 7) RED GREEN BLUE WHITE K CC K CC ( 4 6 8) RED FINE GREEN FINE BLUE FINE WHITE FINE K CC K CC (9) LINEAR CTO K CC K CC 55 EFFECT LED ON LED OFF EFFECT 55 UP LOW EFFECT 5 K 3 K 4 K 5 K 56 K 6 K 7 K 8 K UNUSED RANGE () MACRO COLOUR K CC K CC LEE REFERENCE COLOUR White Dirty White Alice Blue Congo Blue Dark Steel Blue Deep lavender Lilac Tint Daylight Blue Flame Red Bastard Amber Deep Orange Pale Gold Apricot Bright Blue Primary Green Special lavender Pale Lavender Deep Golden Amber Medium Blue Bright Pink Mauve Dark Green Leaf Green Dark Blue Light Blue Steel Blue Med Blu Green Peacock Blue Magenta Dark Pink Middle Rose Light Salmon English Rose Light Rose Orange Deep Amber Straw Light Amber Spring Yellow Dark yellow green Just Blue Sky Blue Lavender Light Lavender Pink Carnation Medium Pink Light Pink Sunrise Red Dark Amber Gold Amber Medium Amber Fire Surprise Peach Straw Tint Medium Yellow Black White 5 K White 37 K White 7 K Magenta Yellow Cyan Blue Green Red Macro color OFF VALUE R G B W

19 () STROBE K CC K CC MACRO EFFECT 5 55 LED ON 39 5 RANDOM FAST STROBE 6 38 RANDOM MEDIUM STROBE 3 5 RANDOM SLOW STROBE 8 LED ON 7 FAST PULSATION (5 flash/sec) (4) PAN Operation with option InvertPanG Off K CC K CC 55 8 SLOW PULSATION (,5 flash/sec) 4 7 LED ON 3 FAST STROBE (5 flash/sec) 4 SLOW STROBE ( flash/sec) 3 LED OFF () DIMMER K CC K CC 55 LED ON EFFECT Operation with option InvertPanG On 55 LED OFF (3) DIMMER FINE K CC K CC EFFECT 55 UP (5) PAN FINE Operation with option InvertPan G Off K CC K CC 55 LOW Operation with option InvertPanG On 55 9 Continue

20 (6) TILT Operation with option InvertTilt (8) FUNCTION GOff K CC K CC K CC K CC 55 EFFECT 5 55 Reset to default Unused Range Halogen Lamp Simulation, type 5 (5 W) Halogen Lamp Simulation, type 4 ( W) Halogen Lamp Simulation, type 3 ( W) Halogen Lamp Simulation, type ( W) Halogen Lamp Simulation, type (75W) Halogen Lamp Simulation OFF (Default) RGBW Gamma curve 3 gamma =. RGBW Gamma curve gamma =.5 (Default) RGBW Gamma curve gamma = Dimmer Curve 4 Dimmer Curve 3 (Default) Dimmer Curve Dimmer Curve Pan Tilt Normal Pan Tilt Fast (Default) Function off The functions are actived passing through the unused range and staying 5 seconds in necessary level. Last selected function still active. Enable setting a new function. Operation with option InvertTilt DIMMER CURVE GAMMA LINEAR DIMMER CURVE GAMMA,5 DIMMER CURVE 3 GAMMA, DIMMER CURVE 4 S GOn 55 (7) TILT FINE Operation with option InvertTilt GOff (9) RESET 55 K CC K CC 55 K CC K CC EFFECT COMPLETE RESET Complete reset is activated passing throug the unused range and staying 5 seconds in complete reset levels 8 7 COMPLETE RESET PAN / TILT RESET Pan / Tilt reset is activated passing throug the unused range and staying 5 seconds in Pan / Tilt reset levels PAN / TILT RESET ZOOM RESET Effects reset is activated passing throug the unused range and staying 5 seconds in Effects reset levels. 6 5 GOn () ZOOM 55 K CC K CC 55 EFFECT WIDE BEAM Cod. ISTJ/ EN Operation with option InvertTilt UNUSED RANGE The functions are actived passing through the unused range and staying 5 seconds in necessary level. Last selected function still active. Enable setting a new function. NARROW BEAM CLAY PAKY S.p.A. Via Pastrengo, 3/b 468 Seriate (BG) Italy Tel Fax PRELIMINARY /4 ZOOM RESET

INSTRUCTION MANUAL INDEX

INSTRUCTION MANUAL INDEX ENGLISH C61350 INSTRUCTION MANUAL Page 2 3 4 5 7 14 21 21 22 INDEX Contents Safety information Unpacking and preparation Installation and start-up Control panel Menu setting Maintenance Technical information

More information

SHARPY WASH 330 INSTRUCTION MANUAL INDEX

SHARPY WASH 330 INSTRUCTION MANUAL INDEX ENGLISH C61378 INSTRUCTION MANUAL INDEX Page Contents 2 Safety information 3 Unpacking and preparation 4 Installation and start-up 5 Control panel 7 Menu setting 14 Maintenance 2 Technical information

More information

SHARPY WASH 330 SHARPY WASH 330 PC

SHARPY WASH 330 SHARPY WASH 330 PC ENGLISH SHARPY WASH 33 SHARPY WASH 33 PC C61378 C61379 INSTRUCTION MANUAL INDEX Page Contents 2 Safety information 3 Unpacking and preparation 4 Installation and start-up 5 Control panel 7 Menu setting

More information

USER MANUAL. B-EYE Light. Please Read Over This Manual Before Operating The Light Fixture

USER MANUAL. B-EYE Light. Please Read Over This Manual Before Operating The Light Fixture USER MANUAL BEYE Light Please Read Over This Manual Before Operating The Light Fixture 1 PRODUCT SPECIFICATIONS 1.1 PRODUCT SPECIFICATIONS The Big BEYE is a high performance wash light, a breathtaking

More information

A.LEDA B-EYE K10 EASY A.LEDA B-EYE K10 A.LEDA B-EYE K20

A.LEDA B-EYE K10 EASY A.LEDA B-EYE K10 A.LEDA B-EYE K20 ENGLISH K EASY K K C65 C69 C6 INSTRUCTION MANUAL PRELIMINARY Page 5 7 7 8 9 INDEX Contents Safety information Unpacking and preparation Installation and startup Control panel Menu setting Maintenance Cause

More information

ALPHA BEAM 700 INSTRUCTION MANUAL INDEX

ALPHA BEAM 700 INSTRUCTION MANUAL INDEX ENGLISH C61360 INSTRUCTION MANUAL Page 2 3 4 5 7 14 21 21 22 INDEX Contents Safety information Unpacking and preparation Installation and start-up Control panel Menu setting Maintenance Technical information

More information

INSTRUCTION MANUAL INDEX

INSTRUCTION MANUAL INDEX ENGLISH C61355 INSTRUCTION MANUAL Page 2 3 4 5 7 14 22 22 23 INDEX Contents Safety information Unpacking and preparation Installation and start-up Control panel Menu setting Maintenance Technical information

More information

INSTRUCTION MANUAL INDEX

INSTRUCTION MANUAL INDEX ENGLISH C61320 INSTRUCTION MANUAL Pag. 2 3 4 5 7 14 20 20 21 INDEX Contents Safety information Unpacking and preparation Installation and start-up Control panel Menu setting Maintenance Technical information

More information

aorun manual V2.0 MARCH 2018

aorun manual   V2.0 MARCH 2018 aorun manual V2.0 MARCH 2018 table of CONTENTS Dimensions 2 Safety instruction 5 Physical installation 6 Control panel 8 Menu navigation 9 DMX Protocols 12 DMX protocol CH14 12 DMX protocol CH16 15 DMX

More information

INSTRUCTION MANUAL INDEX

INSTRUCTION MANUAL INDEX ENGLISH C61325 INSTRUCTION MANUAL Pag. 2 3 4 5 7 15 23 23 24 INDEX Contents Safety information Unpacking and preparation Installation and start-up Control panel Menu setting Maintenance Technical information

More information

INSTRUCTION MANUAL INDEX

INSTRUCTION MANUAL INDEX ENGLISH C6370 INSTRUCTION MANUAL Pag. 3 4 5 7 5 3 INDEX Contents Safety information Unpacking and preparation Installation and start-up Control panel Menu setting Maintenance Technical information Cause

More information

aorun manual V1.0 OCTOBER 2017

aorun manual  V1.0 OCTOBER 2017 aorun manual V1.0 OCTOBER 2017 table of CONTENTS Dimensions 2 Safety information 5 Specifications 7 Included items 8 Physical installation 9 Control panel 11 Operating instructions 12 Channel function

More information

AXCOR BEAM 300 INSTRUCTION MANUAL INDEX

AXCOR BEAM 300 INSTRUCTION MANUAL INDEX ENGLISH C6730 INSTRUCTION MANUAL PRELIMINARY Page 2 3 4 5 7 2 2 INDEX Contents Safety Information Unpacking and preparation Installation and start-up Control panel Maintenance Technical information Cause

More information

A.LEDA B-EYE K10 EASY A.LEDA B-EYE K10 A.LEDA B-EYE K20

A.LEDA B-EYE K10 EASY A.LEDA B-EYE K10 A.LEDA B-EYE K20 ENGLISH K1 EASY K1 K2 C61415 C61419 C6142 INSTRUCTION MANUAL INDEX Page Contents 2 Safety Information 3 Unpacking and preparation 4 Installation and startup 5 Control panel 7 Menu setting 18 Maintenance

More information

K-EYE K10 HCR - K-EYE K20 HCR K-EYE S10 HCR - K-EYE S20 HCR

K-EYE K10 HCR - K-EYE K20 HCR K-EYE S10 HCR - K-EYE S20 HCR ENGLISH K-EYE K0 HCR - K-EYE K0 HCR K-EYE S0 HCR - K-EYE S0 HCR C6430 C6440 C730 C730 INSTRUCTION MANUAL PRELIMINARY INDEX Page Contents Safety information 3 Unpacking and preparation 4 Installation and

More information

GLOW UP STRIP 100 INSTRUCTIONS MANUAL & FLIGHT CASE CONTENTS

GLOW UP STRIP 100 INSTRUCTIONS MANUAL & FLIGHT CASE CONTENTS ENGLISH & FLIGHT CASE C71080 F150 INSTRUCTIONS MANUAL Pag. 3 4 4 4 6 8 8 9 10 16 17 17 18 1 3 CONTENTS Contents Safety information Safety information FLIGHT CASE Unpacking and preparation Removal of the

More information

BEAM MOVING HEAD YODN Lamp. 132W 2R MOVING HEAD Brightness / Stability USER MANUAL. Version 1.0 beta

BEAM MOVING HEAD YODN Lamp. 132W 2R MOVING HEAD Brightness / Stability USER MANUAL. Version 1.0 beta BEAM MOVING HEAD YODN Lamp W R MOVING HEAD Brightness / Stability This product manual contains important information about the safe installation and use of this projector. Please read and follow these

More information

K-EYE K10 & K20 HCR OPERATING MODES

K-EYE K10 & K20 HCR OPERATING MODES K-EYE K10 & K20 HCR Channels 03/2018 OPERATING MODES The projector has 4 operating modes: Raw Mode,, RGB emulation and CMY emulation. Raw Mode enables specific control of each color. Mode is based on a

More information

ArtFox Lighting. LED Beam Wash 19E. User manual. 6. Fixture Cleaning. Please read the instructions carefully before use

ArtFox Lighting. LED Beam Wash 19E. User manual. 6. Fixture Cleaning. Please read the instructions carefully before use 6. Fixture Cleaning ArtFox Lighting LED Beam Wash 19E The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends

More information

HEPIKOS INSTRUCTION MANUAL. INDEX Page Contents

HEPIKOS INSTRUCTION MANUAL. INDEX Page Contents ENGLISH C6397 INSTRUCTION MANUAL INDEX Page Contents Safety information 3 Unpacking and preparation 4 Installation and start-up Congratulations on choosing a Claypaky product! We thank you for your custom.

More information

www. eklights.com Guangzhou Liangyi Lighting Equipments Co.,Ltd. 37 Gongyedadao, Xinhua, Huadu, Guangzhou PC:510800

www. eklights.com Guangzhou Liangyi Lighting Equipments Co.,Ltd. 37 Gongyedadao, Xinhua, Huadu, Guangzhou PC:510800 Guangzhou Liangyi Lighting Equipments Co.,Ltd. 37 Gongyedadao, Xinhua, Huadu, Guangzhou PC:510800 Tel: (020)666 090 88-8002 Fax: (020) 868 670 11 www. eklights.com USER MANUAL CONTENTS SAFETY DIMENSION

More information

EVERY COLOR, EVERY NUANCE AND EVERY SHADE WITH THE HIGHEST CRI

EVERY COLOR, EVERY NUANCE AND EVERY SHADE WITH THE HIGHEST CRI ENGLISH 1 EVERY COLOR, EVERY NUANCE AND EVERY SHADE WITH THE HIGHEST CRI K-EYE HCR is a LED washlight which provides total control over the quality of all forms of white or colored light. The new HCR technology

More information

K-EYE K10 & K20 HCR OPERATING MODES

K-EYE K10 & K20 HCR OPERATING MODES K-EYE K10 & K20 HCR Channels 10/2018 OPERATING MODES The projector has 4 operating modes: Raw Mode, HSV, RGB emulation and CMY emulation. Raw Mode enables specific control of each color. HSV Mode is based

More information

SHARPY WASH 330 SHARPY WASH 330 PC

SHARPY WASH 330 SHARPY WASH 330 PC ENGLISH SHARPY WASH 33 SHARPY WASH 33 PC C61378 C61379 INSTRUCTION MANUAL INDEX Page Contents 2 Safety Information 4 Unpacking and preparation 5 Installation and start-up 6 Control panel 8 Menu setting

More information

KingWash 7QX 7x40w,Zoom 5-60degree. User manual. Please read the instructions carefully before use TABLE OF CONTENTS

KingWash 7QX 7x40w,Zoom 5-60degree. User manual. Please read the instructions carefully before use TABLE OF CONTENTS KingWash 7QX 7x40w,Zoom 5-60degree User manual Please read the instructions carefully before use TABLE OF CONTENTS 1. Safety Instructions... 2 2. Technical Specifications... 4 3. How To Control The Unit...

More information

Dragonfly Quad. User Manual V1.4. Order code: EQLED101

Dragonfly Quad. User Manual V1.4. Order code: EQLED101 Dragonfly Quad User Manual V1.4 Order code: EQLED101 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please

More information

SHARPY INSTRUCTION MANUAL. INDEX Page Contents

SHARPY INSTRUCTION MANUAL. INDEX Page Contents ENGLISH C6375 INSTRUCTION MANUAL INDEX Page Contents Safety Information 3 Unpacking and preparation 4 Installation and start-up 5 Control panel 7 Menu setting 4 Maintenance Optional accessories Technical

More information

Spectra Flood Q40. Exterior Fixture User Manual. Order code: LEDJ Version LEDJ284N - 15 Version

Spectra Flood Q40. Exterior Fixture User Manual. Order code: LEDJ Version LEDJ284N - 15 Version Spectra Flood Q40 Exterior Fixture User Manual Order code: LEDJ284-40 Version LEDJ284N - 15 Version Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL

More information

LED Thunder S-150 Code 1097

LED Thunder S-150 Code 1097 LED Thunder S-150 Code 1097 User Manual 1 1 SAFETY INSTRUCTIONS This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely

More information

ALO 030 MKII. 30 Watt DMX LED scanner. User manual

ALO 030 MKII. 30 Watt DMX LED scanner. User manual ALO 030 MKII 30 Watt DMX LED scanner User manual Safety instructions WARNING! Always keep this device away from moisture and rain! Hazardous electrical shocks may occur! WARNING! Only connect this device

More information

Fixture One XLR Signal Cable One Omega Clamp - Two Safety Chain One User Manual - One

Fixture One XLR Signal Cable One Omega Clamp - Two Safety Chain One User Manual - One TABLE OF CONTENTS 1. INTRODUCTION AND UNPACKING 1 2. SAFTEY INSTRUCTIONS 1-2 3. OPERATION INSTRUCTIONS 2-3 4. MOUNTING AND INSTALLATION 3-4 5. DMX-512 CONTROL CONNECTIONS 4-5 6. MENU NAVIGATION 5 7. PHOTOMETRIC

More information

K-EYE K10 HCR K-EYE K20 HCR

K-EYE K10 HCR K-EYE K20 HCR ENGLISH K-EYE K0 HCR K-EYE K0 HCR C6430 C6440 INSTRUCTION MANUAL PRELIMINARY INDEX Page Contents Safety information 3 Unpacking and preparation 4 Installation and start-up Congratulations on choosing a

More information

LED Spot 300W. Please read this user manual before your operation

LED Spot 300W. Please read this user manual before your operation LED Spot 300W Please read this user manual before your operation 1. Introduction 2. General Guideline 3. Safety Instructions 4. Cleaning and Maintenance 5. Technical Parameters 6. DMX Channels 7. Remark

More information

LED Beam Moving Head. TWIST-150LED Order No INSTRUCTION MANUAL

LED Beam Moving Head. TWIST-150LED Order No INSTRUCTION MANUAL LED Beam Moving Head TWIST-150LED Order No. 38.7970 INSTRUCTION MANUAL MONACOR INTERNATIONAL GmbH & Co. KG Zum Falsch 36 28307 Bremen Germany www.monacor.com 01.30.11.2016 ELECTRONICS FOR SPECIALISTS ELECTRONICS

More information

BEAM MOVING HEAD WITH 100W OSRAM HRI LAMP AND 8-FACET PRISM USER GUIDE

BEAM MOVING HEAD WITH 100W OSRAM HRI LAMP AND 8-FACET PRISM USER GUIDE BEAM MOVING HEAD WITH 100W OSRAM HRI LAMP AND 8-FACET PRISM USER GUIDE 10410 - Version 1 / 11-2015 English Ray1R - Beam moving head with 100W OSRAM HRI LAMP and 8-facet prism 1 - Safety information Important

More information

Fusion 120 Zoom. User Manual. Order code: EQLED068

Fusion 120 Zoom. User Manual. Order code: EQLED068 Fusion 120 Zoom User Manual Order code: EQLED068 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please make

More information

Spectra Batten (Order code: LEDJ95)

Spectra Batten (Order code: LEDJ95) www.prolight.co.uk Spectra Batten (Order code: LEDJ95) Safety WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain,

More information

TRANSCENSION 6-CHANNEL DMX DIMMER PACK (order code: BOTE40) USER MANUAL

TRANSCENSION 6-CHANNEL DMX DIMMER PACK (order code: BOTE40) USER MANUAL www.prolight.co.uk TRANSCENSION 6-CHANNEL PACK (order code: BOTE40) USER MANUAL SAFETY WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this

More information

LED MOVING HEAD LedWash. 36 x 10w RGBW 4in1 Zooming USER MANUAL. Version 1.0 beta

LED MOVING HEAD LedWash. 36 x 10w RGBW 4in1 Zooming USER MANUAL. Version 1.0 beta LED MOVING HEAD LedWash x 10w RGBW in1 Zooming This product manual contains important information about the safe installation and use of this projector. Please read and follow these instructions carefully

More information

ALPHA BEAM 700 INSTRUCTION MANUAL. INDEX Page Contents

ALPHA BEAM 700 INSTRUCTION MANUAL. INDEX Page Contents ENGLISH C6136 INSTRUCTION MANUAL INDEX Page Contents 2 Safety Information 3 Unpacking and preparation 4 Installation and start-up 5 Control panel 7 Menu setting 14 Maintenance 22 Technical information

More information

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS FOS Beam 150W 1 PRODUCT SPECIFICATIONS TECHNICAL SPECIFICATION Voltage: 100/240 Volt AC, 50/60 Hz. Power Consumption: 250 Watt. Light Source: 150 Watt LED, 6800K Beam angle: 2 Colors: 11 dichroic color

More information

Stage Wash 7x 10W LED Moving Head (RGBW)

Stage Wash 7x 10W LED Moving Head (RGBW) Stage Wash 7x 10W LED Moving Head (RGBW) P/N 612870 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 5 CUSTOMER SERVICE... 5 PACKAGE CONTENTS... 6 PRODUCT OVERVIEW...

More information

SUPER LED F4.7 VW Vari-White INSTRUCTION MANUAL

SUPER LED F4.7 VW Vari-White INSTRUCTION MANUAL SUPER LED F4.7 VW Vari-White 60W Vari-White from 2.750 to 6.900 K - Enhanced CRI > 94 White light, with Adjustable Correlated Colour Temperature INSTRUCTION MANUAL Operated Pole Operated MANUFACTURER REPRESENTATIVE

More information

SUPERSHARPY SUPERSHARPY 2

SUPERSHARPY SUPERSHARPY 2 SUPERSHARPY SUPERSHARPY 2 Channels 12/2016 1 CHANNEL STANDARD CHANNEL MODE VECTOR 1 CYAN COLOUR WHEEL CYAN COLOUR WHEEL 2 MAGENTA COLOUR WHEEL MAGENTA COLOUR WHEEL 3 YELLOW COLOUR WHEEL YELLOW COLOUR WHEEL

More information

YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING. SAVE IT FOR FUTURE REFERENCE

YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING. SAVE IT FOR FUTURE REFERENCE MYTHIC USER S MANUAL Thank you for purchasing our moving head MYTHIC. Every suit has been thoroughly tested and shipped in perfect condition. Carefully check the shipping carton for damage that may have

More information

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS FOS Spot 150W 1 PRODUCT SPECIFICATIONS TECHNICAL SPECIFICATION Voltage: 100/240 Volt AC, 50/60 Hz. Power Consumption: 250 Watt. Light Source: 150 Watt LEDs, 7500K. Beam angle: 14. Colors: 8 colors + White

More information

AXCOR SPOT 300 INSTRUCTION MANUAL INDEX

AXCOR SPOT 300 INSTRUCTION MANUAL INDEX ENGLISH C6505 INSTRUCTION MANUAL Page 2 3 4 5 7 5 5 INDEX Contents Safety Information Unpacking and preparation Installation and start-up Control panel Maintenance Technical information Cause and solution

More information

JunoScan MK-II LED scanner. user manual

JunoScan MK-II LED scanner. user manual JunoScan MK-II LED scanner user manual Musikhaus Thomann e.k. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 26.10.2012 Table of

More information

TABLE OF CONTENTS PART 5 APPENDIX TROUBLE SHOOTING MAINTENANCE A CTIVATE THE PASSWORD...13.

TABLE OF CONTENTS PART 5 APPENDIX TROUBLE SHOOTING MAINTENANCE A CTIVATE THE PASSWORD...13. TABLE OF CONTENTS PART PRODUCT (GENERAL)....--PRODUCT INTRODUCTION....--PRODUCT FEATURES....--TECHNICAL SPECIFICATIONS....4--PHOTOMETRIC DATA....5--SAFETY WARNING...4. PART INSTALLATION...5..--MOUNTING...5..--POWER

More information

1440/2880 HP RGB+WW+CW

1440/2880 HP RGB+WW+CW office Nano*Pix 1440/2880 HP RGB+WW+CW User Manual Rev 7/2014 V4.4 Specifications subject to change without notice. Seite 1 Product Description Thank you for choosing this LDDE Nano*Pix 1440 HP / 2880

More information

Commander 384. w w w. p r o l i g h t. c o. u k U S E R M A N U A L

Commander 384. w w w. p r o l i g h t. c o. u k U S E R M A N U A L Commander 384 w w w. p r o l i g h t. c o. u k U S E R M A N U A L 1, Before you begin 1.1: Safety warnings...2 3 1.2: What is included...4 1.3: Unpacking instructions...4 2, Introduction 2.1: Features...4

More information

User Manual. 360W LED Moving Zoom KEEP THIS MANUAL FOR FUTURE NEEDS. 36pcs10W 4 in 1 RGBW LEDs

User Manual. 360W LED Moving Zoom KEEP THIS MANUAL FOR FUTURE NEEDS. 36pcs10W 4 in 1 RGBW LEDs User Manual 360W LED Moving Zoom 36pcs10W 4 in 1 RGBW LEDs KEEP THIS MANUAL FOR FUTURE NEEDS 1. Dispacking Thank you for choosing our moving head. For your own safety, please read this manual before installing

More information

ORDER CODE: EQLED65 USER MANUAL

ORDER CODE: EQLED65 USER MANUAL www.prolight.co.uk ORDER CODE: EQLED65 USER MANUAL Safety WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain,

More information

Hex-color RGBAW+UV LED strip light

Hex-color RGBAW+UV LED strip light Hex-color RGBAW+UV LED strip light 2 19 SAFETY / GENERAL INSTRUCTIONS INTRODUCTION Features Specifications OVERVIEW : CONNECTIONS Rear view DIMENSIONS INSTALLATION Mounting FUNCTIONS AND SETTINGS Function

More information

ALPHA SPOT HPE 700 INSTRUCTION MANUAL. INDEX Page Contents

ALPHA SPOT HPE 700 INSTRUCTION MANUAL. INDEX Page Contents ENGLISH C61355 INSTRUCTION MANUAL INDEX Page Contents 2 Safety Information 2 Unpacking and preparation 4 Installation and start-up 5 Control panel 7 Menu setting 15 Maintenance 23 Technical information

More information

K-EYE K10 HCR - K-EYE K20 HCR K-EYE S10 HCR - K-EYE S20 HCR

K-EYE K10 HCR - K-EYE K20 HCR K-EYE S10 HCR - K-EYE S20 HCR ENGLISH K-EYE K0 HCR - K-EYE K20 HCR K-EYE S0 HCR - K-EYE S20 HCR C6430 C6440 C7320 C730 INSTRUCTION MANUAL PRELIMINARY INDEX Page Contents 2 Safety information 3 Unpacking and preparation 4 Installation

More information

2002 Martin Professional A/S, Denmark.

2002 Martin Professional A/S, Denmark. Freekie user manual 2002 Martin Professional A/S, Denmark. All rights reserved. No part of this manual may be reproduced, in any form or by any means, without permission in writing from Martin Professional

More information

DMX Channel Index. Revision F Covers firmware version

DMX Channel Index. Revision F Covers firmware version DMX Channel Index Revision F Covers firmware version 118-14-13 Normal mode (16 DMX channels) Channel Function Description 1 2 Pan coarse Pan fine Left right in 1.2 increments (16 bit) 3 Tilt coarse Up

More information

LED IP65 Slimline Par RGBWA +UV 7x12W

LED IP65 Slimline Par RGBWA +UV 7x12W VIS0495.4 LED IP65 Slimline Par RGBWA +UV 7x12W User Manual KEEP THIS MANUAL FOR FURTHER NEEDS Key Features: 7 x RGBAW + UV HEX 12W LED IP65 Weatherproof Die-Cast Housing Slimline, Compact & Stylish Design

More information

SUPERSHARPY INSTRUCTION MANUAL. INDEX Page Contents

SUPERSHARPY INSTRUCTION MANUAL. INDEX Page Contents ENGLISH C6390 INSTRUCTION MANUAL INDEX Page Contents Safety Information 3 Unpacking and preparation 4 Installation and start-up 5 Control panel 7 Maintenance 8 Technical information 9 Cause and solution

More information

Operating Manual. Automated Gear. Apollo Design Technology, Inc Fourier Drive Fort Wayne, IN USA

Operating Manual. Automated Gear. Apollo Design Technology, Inc Fourier Drive Fort Wayne, IN USA Operating Manual Automated Gear Apollo Design Technology, Inc. 4130 Fourier Drive Fort Wayne, IN 46818 USA PH: +01(260)497-9191 FX: +01(260)497-9192 www.apollodesign.net 11-25-09 5-6 POWERING UP THE RIGHT

More information

LED Spot Light User Manual Model LS90 Big Dipper Laser Science And Technology Co., Ltd Please read this manual carefully before operating

LED Spot Light User Manual Model LS90 Big Dipper Laser Science And Technology Co., Ltd Please read this manual carefully before operating LED Spot Light User Manual Model:LS90 Big Dipper Laser Science And Technology Co., Ltd REV: 1.01 Please read this manual carefully before operating Warnings: Please check the package whether any damage

More information

Stratos Duo RGB. User Manual. Order code: EQLED371

Stratos Duo RGB. User Manual. Order code: EQLED371 Stratos Duo RGB User Manual Order code: EQLED1 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please make

More information

80W SPOT MOVING HEAD CYCLONE-80 USER GUIDE April 2014 version

80W SPOT MOVING HEAD CYCLONE-80 USER GUIDE April 2014 version 80W SPOT MOVING HEAD CYCLONE-80 USER GUIDE 10175-1 April 2014 version 1 - Safety information Important safety information WARNING : This unit contains no user-serviceable parts. Do not open the housing

More information

MHL-1410WISPOT 14X 10W QUAD DMX 2.4GHZ

MHL-1410WISPOT 14X 10W QUAD DMX 2.4GHZ Ref. No.: 150.523 MHL-1410WISPOT 14X 10W QUAD DMX 2.4GHZ MANUAL Thank you for purchasing one of our products. Before you use this product please read these instructions carefully to enjoy optimal performance

More information

CHANNEL LIST. N STANDARD mode 14 channels. SHARPY mode 16 channels

CHANNEL LIST. N STANDARD mode 14 channels. SHARPY mode 16 channels Axcor Beam 300 Channels 12/2017 1 N STANDARD 14 channels CHANNEL LIST 16 channels 1 COLOUR WHEEL COLOUR WHEEL 2 STOPPER / STROBE STOPPER / STROBE 3 DIMMER DIMMER 4 DIMMER FINE STATIC GOBO CHANGE 5 STATIC

More information

ORLAND SCAN PR PR LIGHTING LTD. Yingbin Road, Dashi Panyu, Guangzhou, China

ORLAND SCAN PR PR LIGHTING LTD. Yingbin Road, Dashi Panyu, Guangzhou, China ORLAND SCAN PR-1201 This product manual contains important information about the safe installation and use of this projector. Please read and follow these instructions carefully and keep this manual in

More information

6X3W RGB LEDS PROJECTOR FOR PROFESSIONAL TRUSSES USER GUIDE / Version 1

6X3W RGB LEDS PROJECTOR FOR PROFESSIONAL TRUSSES USER GUIDE / Version 1 6X3W RGB LEDS PROJECTOR FOR PROFESSIONAL TRUSSES USER GUIDE 10364-07-2015 / Version 1 English MINITRUSS-6TCb - 6x3W RGB LEDs projector for professional trusses 2 MINITRUSS-6TCb - 6x3W RGB LEDs projector

More information

Color Ground 12T 16 A USER MANUAL 5 APPENDIX 5.1 TROUBLE SHOOTING 5.2 MAINTENANCE LED MODULE. Version 1.0 SITUATION CAUSE ACTION 5 APPENDIX

Color Ground 12T 16 A USER MANUAL 5 APPENDIX 5.1 TROUBLE SHOOTING 5.2 MAINTENANCE LED MODULE. Version 1.0 SITUATION CAUSE ACTION 5 APPENDIX 5 APPENDIX 5. TROUBLE SHOOTING LED MODULE SITUATION CAUSE ACTION Can not receive DMX signal ) DMX signal cable error 2) Signal connection error 3) The input signal IC damaged 4) DMX address error ) Check

More information

4-PROJECTOR BAR WITH 3 X 9W LEDS AND 1 X 1W FLASH LED USER GUIDE

4-PROJECTOR BAR WITH 3 X 9W LEDS AND 1 X 1W FLASH LED USER GUIDE 4-PROJECTOR BAR WITH 3 X 9W LEDS AND 1 X 1W FLASH LED USER GUIDE 10482 - Version 1 / 04-2016 English LIVESET - LIVESET - 4-Projector bar with 3 x 9W LEDs and 1 x 1W Flash LED 1 - Safety information Important

More information

SHOWLINE SL BEAM 100 LED LUMINAIRE SPECIFICATIONS.

SHOWLINE SL BEAM 100 LED LUMINAIRE SPECIFICATIONS. SHOWLINE SL BEAM 100 LED LUMINAIRE SPECIFICATIONS. GENERAL. A.) Overview. 1.) The luminaire shall be a motorized colour mixing luminaire employing seven (7) homogenized red, green, blue, and white LED

More information

LED SPOT HEAD USERS GUIDE

LED SPOT HEAD USERS GUIDE LED SPOT HEAD USERS GUIDE 1 1. Product Introduction: 1.1 Before unpack the fixture, pls make sure that the packing is in good condition, following items will be found in the box: - The fixture - This users

More information

PART 1 PRODUCT (GENERAL)...1.

PART 1 PRODUCT (GENERAL)...1. TABLE OF CONTENTS PART PRODUCT (GENERAL)....-- TECHNICAL SPECIFICATIONS....-- SAFETY WARNING... PART INSTALLATION....--MOUNTING....--SIGNAL CONNECTIONS.......--SETTING UP WITH A DMX5 CONTROLLER(STAGE MODE)...

More information

HEX16 Strip User Manual

HEX16 Strip User Manual User Manual www.showtech.com.au 1 Table of Contents 1. Safety instructions 3 1.1 Overhead rigging.4 1.2 Power Connection..5 1.3 Cleaning and Maintenance..6 2. Menu Navigation..7 3. DMX Allocation..9 4.

More information

Quick Reference Guide

Quick Reference Guide Quick Reference Guide About this Guide Disclaimer The Q-Wash 360Z-LED Quick Reference Guide (QRG) only contains the product s connection and mounting information as well as the menu options and the DMX

More information

Outdoor Stage PAR 12 4W Quad IR RGBW, 12 3W Quad IR UV LED PAR. user manual

Outdoor Stage PAR 12 4W Quad IR RGBW, 12 3W Quad IR UV LED PAR. user manual Outdoor Stage PAR 12 4W Quad IR RGBW, 12 3W Quad IR UV LED PAR user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de

More information

LED ZOOM PAR Please R ead O ver T his M anual B efore O perating T he L ight F ixture.

LED ZOOM PAR Please R ead O ver T his M anual B efore O perating T he L ight F ixture. LED PAR T. ABLE OF CONTENTS MAINTENANCE 0 PART PRODUCT (GENERAL)... 9 8 7. -- TECHNICAL SPECIFICATIONS.... -- SAFETY WARNING... 7 9 PART INSTALLATION....--MOUNTING....--POWER CONNECTION...... 8 0 8 9 0

More information

6X3W TRICOLOUR LEDS COMPACT PROJECTOR

6X3W TRICOLOUR LEDS COMPACT PROJECTOR 6X3W TRICOLOUR LEDS COMPACT PROJECTOR USER GUIDE 10147 - Version 2 / 05-2015 English MINICUBE-6TCb - 6x3W tricolour LEDs compact projector 1 - Safety information Important safety information This unit

More information

Mini LED Pin Spot Light Model: PLS00571

Mini LED Pin Spot Light Model: PLS00571 Mini LED Pin Spot Light Model: PLS00571 1 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION When using electrical appliances basic safety

More information

SquareLED - Aura Bar & Matrix Beam Light 100

SquareLED - Aura Bar & Matrix Beam Light 100 SquareLED - Aura Bar & Matrix Beam Light 100 1. SAFETY INSTRUCTIONS Please read these instructions carefully they include the important information about the installation usage and maintenance of this

More information

Mover Beam 7 CKU (US) / CKE (EU) USER MANUAL

Mover Beam 7 CKU (US) / CKE (EU) USER MANUAL Mover Beam 7 CKU01-5030 (US) / CKE01-5030 (EU) USER MANUAL Introduction Thank you for purchasing the ColorKey Mover Beam 7. Please read these instructions carefully before use. Operating this fixture according

More information

USER MANUAL Table of Contents

USER MANUAL Table of Contents USER MANUA Table of Contents Safety Information.. 3 Specifications.. 4 Main Power Connection.. 5 DMX-512 Connection... 5 Main Control Menu... 6 DMX Profile... 8 Rigging the Fixture....10 Cleaning & Maintenance...10

More information

BSL HELIOS USERS GUIDE

BSL HELIOS USERS GUIDE BSL HELIOS USERS GUIDE 1. Product Introduction: 1.1 Before unpack the fixture, pls make sure that the packing is in good condition, following items will be found in the box: - The fixture - This users

More information

Mini Stage Par 4 8W QCL RGBA/RGBW 25 /40 LED PAR. user manual

Mini Stage Par 4 8W QCL RGBA/RGBW 25 /40 LED PAR. user manual Mini Stage Par 4 8W QCL RGBA/RGBW 25 /40 LED PAR user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet:

More information

USER GUIDE IRLEDS SERIES - LED PAR PROJECTORS WITH INFRARED REMOTE CONTROL

USER GUIDE IRLEDS SERIES - LED PAR PROJECTORS WITH INFRARED REMOTE CONTROL IRLEDS SERIES - LED PAR PROJECTORS WITH INFRARED REMOTE CONTROL USER GUIDE 9869/9870/9871/9872/9873/9874/9875/9876/9877/9878/9974/9975 - November 2012 Version 2.0 English irleds series - LED PAR projectors

More information

Instruction Manual. from software version 1.0 (instruction version 1.3) Internet:

Instruction Manual. from software version 1.0 (instruction version 1.3)   Internet: Instruction Manual from software version 1.0 (instruction version 1.3) email: service@glp.de Internet: http://www.glp.de GLP German Light Production (V1.3) 1 Table of contents 1 Description of Device...

More information

LED DRIVERS. LQC4D-V1 4 channels. User Manual FEATURES

LED DRIVERS. LQC4D-V1 4 channels. User Manual FEATURES pag. 1/13 FEATURES Outputs: 4 x channels BUS+SEQUENCER+FADER+DIMMER+DRIVER Input: DC 12/24/48 Vdc BUS Command: DALI LOCAL Command: 4x N.O. push button (with or without memory), 0-10V, 1-10V Controls: dimmer,

More information

WASH MOVING HEAD M7W15RGBW USER MANUAL. For safety, please read this user manual carefully before initial use.

WASH MOVING HEAD M7W15RGBW USER MANUAL. For safety, please read this user manual carefully before initial use. 1 WASH MOVING HEAD M7W15RGBW USER MANUAL For safety, please read this user manual carefully before initial use. Event Lighting reserves the right to revise the manual at any time. Information and specifications

More information

USER GUIDE 8-CHANNEL DMX CONTROLLER December 2013 Version 1.0 CHASE / STROBE SPEED FADE SPEED RED GREEN BLUE WHITE AMBER DIMMER INSERT

USER GUIDE 8-CHANNEL DMX CONTROLLER December 2013 Version 1.0 CHASE / STROBE SPEED FADE SPEED RED GREEN BLUE WHITE AMBER DIMMER INSERT 8-CHANNEL DMX CONTROLLER RED GREEN BLUE YELLOW 1 2 3 4 5 6 CYAN ORANGE PURPLE WHITE RED GREEN BLUE WHITE AMBER DIMMER RECORD INSERT DELETE TAP CLEAR MANUAL MUSIC 1 2 3 5 6 7 AUTO CHASE / STROBE SPEED 4

More information

SOFT LED 4 Vari-White INSTRUCTION MANUAL

SOFT LED 4 Vari-White INSTRUCTION MANUAL SOFT LED 4 Vari-White 180W LED SOFTLIGHT 90-250V 50/60 Hz (white light, with tunable correlated color temperature from 2.800 to 6.600 K) INSTRUCTION MANUAL Manual Operated (Pole Operated available, not

More information

LOOK Dual Beam + Aura Effect 1

LOOK Dual Beam + Aura Effect 1 Blizzard Lighting, LLC www.blizzardlighting.com Waukesha, WI USA Copyright (c) 2016 TABLE OF CONTENTS LOOK Dual Beam + Aura Effect 1 1. Getting Started 3 What s In The Box? 3 Getting It Out Of The Box

More information

9X9W LEDS BLINDER WITH LCD DISPLAY USER GUIDE December 2013 Version 1.12

9X9W LEDS BLINDER WITH LCD DISPLAY USER GUIDE December 2013 Version 1.12 9X9W LEDS BLINDER WITH LCD DISPLAY USER GUIDE 10133 - December 2013 Version 1.12 1 - Safety information Important safety information This unit is intended for indoor use only. Do not use it in a wet, or

More information

USER MANUAL Table of Contents

USER MANUAL Table of Contents USER MANUA Table of Contents Safety Information. 3 Specifications.. 4 Main Power Connection.. 5 DMX-512 Connection...... 5 DMX Profile... 7 Main Control Menu... 8 Rigging the Fixture.10 Cleaning & Maintenance...10

More information

Altman Lighting AP-150 RGBW Par Specification

Altman Lighting AP-150 RGBW Par Specification 1.01 COLOR MIXING LED WASH FIXTURE A. General 1. The fixture shall be Red, Green, Blue, and White LED luminaire with motorized zoom and DMX control. The fixture shall be the AP-150 RGBW by Altman Stage

More information

CLF Manuals CLF Colour Par CLF Colour 12 Par CLF Colour Par 12 Version 1.0 November 2012 Version 1.0 1

CLF Manuals CLF Colour Par CLF Colour 12 Par CLF Colour Par 12 Version 1.0 November 2012 Version 1.0 1 CLF Manuals CLF Colour Par 12 CLF Colour Par 12 Version 1.0 November 2012 1 1.BEFORE YOU BEGIN What is included Ø 1 x Fixture Ø 1 x Power cable with plug Ø 1 x User Manua Unpacking Instructions Immediately

More information

ALPHA PROFILE 800 ST

ALPHA PROFILE 800 ST ENGLISH ALPHA PROFILE 8 ST C6385 INSTRUCTION MANUAL INDEX Pag. Contents 2 Safety information 3 Unpacking and preparation 4 Installation and start-up 5 Control panel 7 Menu setting 4 Maintenance 23 Optional

More information

Stage Right Party 10-Watt Mini Beam Moving Head LED Light

Stage Right Party 10-Watt Mini Beam Moving Head LED Light Stage Right Party 10-Watt Mini Beam Moving Head LED Light P/N 612980 User's Manual SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these

More information

Outdoor Stage PAR 12 4 W Quad, 12 3 W UV IR LED PAR. user manual

Outdoor Stage PAR 12 4 W Quad, 12 3 W UV IR LED PAR. user manual Outdoor Stage PAR 12 4 W Quad, 12 3 W UV IR LED PAR user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet:

More information

USER S MANUAL

USER S MANUAL 612720 USER S MANUAL SAFETY WARNINGS AND GUIDELINES Prior to operation, check the unit and power cord for physical damage. Do not use if physical damage has occurred. Before plugging the unit into a power

More information

Truss Light COB LED 30W

Truss Light COB LED 30W User manual Truss Light COB LED 30W User manual Focusing tube Truss Light COB LED 30W 2 / 11 Table of contents 1. Safety instructions... 4 1.1. FOR SAFE AND EFFICIENT OPERATION... 4 2. Technical data...

More information