Flygt Handleiding voor installatie, bediening en onderhoud
|
|
- Lydia Sullivan
- 5 years ago
- Views:
Transcription
1 Flygt 068 Handleiding voor installatie, bediening en onderhoud
2 Table of Contents Table of Contents 1 Introduction Specially approved products... Product Description....1 The data plate.... Approvals...4. Product denomination... 5 Drive and Hydraulic Units CF...7. CP...9. DF DP FP FS MF....8 MP /170/180/890, drive unit /170/180/890, hydraulic unit... 4 Installation Components CF CP DF DP DS FP FS MF MP /170/180/ Service Parts /170/180/ Flygt 068 Parts List 1
3 1 Introduction 1 Introduction Purpose of this manual Disclaimer Data for ordering spare parts The purpose of this manual is to provide necessary information on spare parts and accessories order. Always use genuine Flygt parts. The use of other spare parts or accessories can invalidate any claims for warranty or compensation. Xylem does not take any responsibility for damages that are caused by the use of non-original parts. For more information, contact your local sales and service representative. The following information is needed for spare part orders: Serial number of the product Part number Quantity of bulk material, see * in tables 1.1 Specially approved products Qualification of personnel Dimensional accuracy inspection Only Xylem or Xylem-authorized service personnel may undertake repair work on specially approved products. Spare parts marked with (Ex) after the part number are subject to dimensional accuracy inspection when used in specially approved products. Flygt 068 Parts List
4 Product Description Product Description.1 The data plate The data plate is a metal label that is located on the main body of the products. The data plate lists key product specifications. Specially approved products also have an approval plate WS00657A 1. Curve code or Propeller code. Serial number. Product number 4. Country of origin 5. Additional information 6. Phase; type of current; frequency 7. Rated voltage 8. Thermal protection 9. Thermal class 10.Rated shaft power 11.International standard 1.Degree of protection 1.Rated current 14.Rated speed 15.Maximum submergence 16.Direction of rotation: L=left, R=right 17.Duty class 18.Duty factor 19.Product weight 0.Locked rotor code letter.power factor.maximum ambient temperature.read installation manual 4.Notified body, only for EN-approved Ex products Figure 1: The data plate Flygt 068 Parts List
5 Product Description. Approvals Product approvals for hazardous locations Pump Approval European Norm (EN) ATEX Directive EN :009, EN :007, EN 146-1:009, EN 146-5:011 I M Ex d I ( ) II G c Ex d IIB T4 Gb EN approval for cable entry: Certificate number: INERIS 0ATEX9008 U II G Ex d IIC Gb or I M Ex d I Mb IEC IECEx scheme IEC , IEC Ex d IIB T4 FM (FM Approvals) Explosion proof for use in Class I, Div. 1, Group C and D Dust ignition proof for use in Class II, Div. 1, Group E, F and G Suitable for use in Class III, Div. 1, Hazardous Locations CSA Ex Explosion proof for use in Class I, Div. 1, Group C and D EN approval plate This illustration describes the EN approval plate and the information that is contained in its fields WS0097A 1. Approval. Approval authority and Approval number. Approval for Class I 4. Approved for drive unit 5. Stall time 6. Starting current or Rated current 7. Duty class 8. Duty factor 9. Input power 10.Rated speed 11.Controller 1.Additional information 1.Maximum ambient temperature 14.Serial number 15.ATEX marking IEC approval plate This illustration describes the IEC approval plate and the information that is contained in its fields. International Norm; not for EU member countries. 4 Flygt 068 Parts List
6 Product Description Approval. Approval authority and Approval number. Approved for drive unit 4. Stall time 5. Starting current or Rated current 6. Duty class 7. Duty factor 8. Input power 9. Rated speed 10.Controller 11.Additional information 1.Maximum ambient temperature 1.Serial number WS00179B FM approval plate This illustration describes the FM approval plate and the information that is contained in its fields Temperature class. Maximum ambient temperature WS0097A CSA approval plate This illustration describes the CSA approval plate and the information that is contained in its fields. 1. Temperature class 1 WS009401A. Product denomination Reading instruction In this section, code characters are illustrated accordingly: X = letter Y = digit The different types of codes are marked up with a, b and c. Code parameters are marked up with numbers. Flygt 068 Parts List 5
7 Product Description Codes and parameters XXYYYY. YYY YYY YYYY a b c WS00665B Type of Callout Number Indication Type of code a Sales denomination b Product code c Serial number Parameter 1 Hydraulic end Type of installation Sales code 4 Version 5 Production year 6 Production cycle 7 Running number 6 Flygt 068 Parts List
8 Drive and Hydraulic Units Drive and Hydraulic Units.1 CF Curve: 51, 5, 55, 56, 57 CF/CS Flygt 068 Parts List 7 085C
9 Drive and Hydraulic Units Curve: 51, 5, 55, 56 CF/CS C 8 Flygt 068 Parts List
10 Drive and Hydraulic Units. CP Curve: 51, 5, 55, 56, 57 CP C Flygt 068 Parts List 9
11 Drive and Hydraulic Units CP B 10 Flygt 068 Parts List
12 Drive and Hydraulic Units Curve: 51, 5, 55, 56 CP C Flygt 068 Parts List 11
13 Drive and Hydraulic Units CP B 1 Flygt 068 Parts List
14 Drive and Hydraulic Units. DF MT, curve: 470, 471, 47, 47, 474, 475. HT, curve: 0, 4, 0 DF/DS C Flygt 068 Parts List 1
15 Drive and Hydraulic Units MT, curve: 470, 471, 47, 47, 474, 475. HT, curve: 0, 4, 0 DF/DS C 14 Flygt 068 Parts List
16 Drive and Hydraulic Units.4 DP MT, curve: 470, 471, 47, 47, 474, 475. HT, curve: 0, 4, 0 DP C Flygt 068 Parts List 15
17 Drive and Hydraulic Units MT, curve: 470, 471, 47, 47, 474, 475. HT, curve: 0, 4, 0 DP C 16 Flygt 068 Parts List
18 Drive and Hydraulic Units.5 FP Curve: 90, 91 FP C Flygt 068 Parts List 17
19 Drive and Hydraulic Units Curve: 90, 91 FP C 18 Flygt 068 Parts List
20 Drive and Hydraulic Units.6 FS Curve: 90, 91 FS C Flygt 068 Parts List 19
21 Drive and Hydraulic Units Curve: 91, 91 FS C 0 Flygt 068 Parts List
22 Drive and Hydraulic Units.7 MF Curve: 0,, 4, 6, 8 MF D Flygt 068 Parts List
23 Drive and Hydraulic Units Curve: 0,, 4, 6, 8 MF D Flygt 068 Parts List
24 Drive and Hydraulic Units.8 MP Curve: 0,, 4, 6, 8 MP D Flygt 068 Parts List
25 Drive and Hydraulic Units Curve: 0,, 4, 6, 8 MP D 4 Flygt 068 Parts List
26 Drive and Hydraulic Units /170/180/890, drive unit Pos. No Part. No Type Denomination Qty/Version Lifting handle VA Hex.socket hd screw M6X16-A Data plate USE AS SPARE PART Sticker CUT HAZARD Instruction plate CANADA Instruction plate Sticker Name plate Hex.socket hd screw M6X1-A Drive screw 4X5-A/A Drive screw 4X5-A/A Drive screw 4X5-A/A (Ex) Stator housing Stator housing Stator housing AUTOMATIC LEVEL CONTROL Stator housing (Ex) Stator housing Hex.socket hd screw M8X5-A4-80 1, Closed-end splice (AWG -18) L= Plate HOT WATER PRODUCT Certificate plate EN (Ex) Certificate plate IECEX Certificate plate FM Name plate Marking tape Connection plate O-ring 156X NBR O-ring 156X NBR Ball bearing 0X5X15 MM Ball bearing 6004-Z (Ex) Shaft unit -POL -PHASE 80 MM 1-08-B Shaft unit -POL 1-PHASE 100 MM 1-10-B Shaft unit -PHASE -POL 100 MM 1-10-B Shaft unit 4-POL -PHASE 80 MM B (Ex) Shaft unit 4-POL -PHASE 100 MM B (Ex) Shaft unit 1-08-B Shaft unit 1-PH -PO 100 MM MOTOR (Ex) Shaft unit -PH -PO 100 MM MOTOR 1-10-B 1-10-B Flygt 068 Parts List 5
27 Drive and Hydraulic Units Pos. No Part. No Type Denomination Stator 1-08-b -phase 50 Hz -poles 80V-400V Y 0V-0V D P=1,70kW -phase 60 Hz -poles 460V-480V Y P=kW/,70hp Stator 1-08-b -phase 50Hz -poles 80V-400V Y P=1,7kW -phase 60Hz -poles 440V-480V Y P=kW/,7hp Stator 1-08-b -phase 50 Hz -poles 415V-440V Y P=1,70kW Stator 1-08-b -phase 50 Hz -poles 500V-550V Y P=1,70kW -phase 60 Hz -poles 575V-600V Y P=kW/,70hp -phase 60Hz -poles 575V-600V Y P=1,5kW/hp Stator 1-08-b -phase 50 Hz -poles 690V Y 400V D P=1,70kW Stator 1-08-b -phase 60 Hz -poles 460V YSER 0V Y// P=kW/,70hp -phase 60Hz -poles 460V YSER 0V Y// P=1,5kW/hp Stator 1-08-b Stator -phase 50 Hz -poles 190V-00V Y P=1,70kW -phase 60 Hz -poles 00V-0V Y P=kW/,70hp -phase 60Hz -poles 00V-0V Y P=1,5kW/hp Stator 1-08-b -phase 60 Hz -poles 80V Y 0V D P=kW/,70hp Stator 1-10-b 1-phase 60 Hz -poles 0V-40V P=1,40kW/1,90hp 1-phase 60 Hz -poles 0V-40V P1=1,80KW 1-phase 60 Hz -poles 0V-40V P=1,70kW/,0hp Stator 1-10-b -phase 50 Hz -poles 80V-400V Y 0V-0V D P=,40kW -phase 60 Hz -poles 460V-480V Y P1=,80KW -phase 50 Hz -poles 80V-400V Y 0V-0V D P1=,40KW -phase 60 Hz -poles 460V-480V Y P=,80kW/,80hp Stator 1-10-b -phase 50 Hz -poles 80V-415V Y P=,40kW -phase 60 Hz -poles 440V-480V Y P1=1,90KW -phase 50 Hz -poles 80V-415V Y Max P1=KW -phase 60 Hz -poles 440V-480V Y P=,80kW/,80hp Qty/Version Flygt 068 Parts List
28 Drive and Hydraulic Units Pos. No Part. No Type Denomination Stator 1-10-b -phase 50 Hz -poles 415V-440V Y P=,40kW -phase 50 Hz -poles 415V-440V Y P1=,40KW Stator 1-10-b -phase 50 Hz -poles 500V-550V Y P=,40kW -phase 60 Hz -poles 575V-600V Y P1=,80KW -phase 50 Hz -poles 500V-550V Y P1=,40KW -phase 60 Hz -poles 575V-600V Y P=,80kW/,80hp Stator 1-10-b -phase 50 Hz -poles 690V Y 400V D P=,40kW -phase 50 Hz -poles 690V Y 400V D P1=,40KW Stator 1-10-b -phase 60 Hz -poles 460V YSER 0V Y// P1=,80KW -phase 60 Hz -poles 460V YSER 0V Y// P=,80kW/,80hp Stator 1-10-b -phase 50 Hz -poles 190V-00V Y P=,40kW -phase 60 Hz -poles 00V-0V Y Max P1=,90KW -phase 50 Hz -poles 190V-00V Y P1=,40KW -phase 60 Hz -poles 00V-0V Y P=,80kW/,80hp Stator 1-10-b -phase 60 Hz -poles 80V Y 0V D P1=,80KW -phase 60 Hz -poles 80V Y 0V D P=,80kW/,80hp Stator 1-10-b -phase 60 Hz -poles 08V Y P1=,80KW -phase 60 Hz -poles 08V Y P=,80kW/,80hp Stator b -phase 50 Hz 4-poles 400V-415V Y P=1,50kW -phase 60 Hz 4-poles 460V-480V Y P=1,80kW/,40hp Stator b -phase 50 Hz 4-poles 400V-415V Y 0V D P=1,50kW Max ambient temp=40 DC Thermal contact 15 DC -phase 60 Hz 4-poles 460V-480V Y P=1,80kW/,40hp Stator b -phase 50 Hz 4-poles 440V Y P=1,50kW Stator b -phase 50 Hz 4-poles 500V Y P=1,50kW -phase 60 Hz 4-poles 575V-600V Y P=1,80kW/,40hp Qty/Version Flygt 068 Parts List 7
29 Drive and Hydraulic Units Pos. No Part. No Type Denomination Stator b -phase 50 Hz 4-poles 690V Y 400V D P=1,50kW Stator b -phase 50 Hz 4-poles 00V Y P=1,50kW Stator b -phase 60 Hz 4-poles 0V-0V D 80V Y P=1,80kW/,40hp Stator b -phase 60 Hz 4-poles 00V-08V Y P=1,80kW/,40hp Stator b -phase 60 Hz 4-poles 400V Y P=1,80kW/,40hp Stator b -phase 50 Hz 4-poles 80V Y 0V D P=1,50kW Stator b -phase 50 Hz 4-poles 550V Y P=1,50kW Stator b -phase 60 Hz 4-poles 460V YSER 0V Y// P=1,0kW/1,70hp -phase 60 Hz 4-poles 460V YSER 0V-40V Y// P=1,80kW/,40hp Stator b 1phs 1-phase 60 Hz 4-poles 0V-40V P=1,50kW/hp 1-phase 60 Hz 4-poles 0V-40V P=0,97kW/1,0hp Stator b -phase 50 Hz 4-poles 400V-415V Y 0V D P=kW -phase 60 Hz 4-poles 440V-480V Y P1=,50KW -phase 50 Hz 4-poles 400V-415V Y Max P1=,0KW -phase 60 Hz 4-poles 440V-480V Y P=,40kW/,0hp Stator b -phase 50 Hz 4-poles 440V Y P=kW -phase 50 Hz 4-poles 440V Y P1=,0KW Stator b -phase 50 Hz 4-poles 500V Y P=kW -phase 60 Hz 4-poles 575V-600V Y P1=,50KW -phase 50 Hz 4-poles 500V Y P1=,0KW -phase 60 Hz 4-poles 575V-600V Y P=,40kW/,0hp Stator b -phase 50 Hz 4-poles 690V Y 400V D P=kW -phase 50 Hz 4-poles 690V Y 400V D P1=,0KW Stator b -phase 50 Hz 4-poles 00V Y P=kW -phase 50 Hz 4-poles 00V Y P1=,0KW Qty/Version Flygt 068 Parts List
30 Drive and Hydraulic Units Pos. No Part. No Type Denomination Stator b -phase 60 Hz 4-poles 0V-0V D Max P1=,60KW -phase 60 Hz 4-poles 0V-0V D 80V Y P=,40kW/,0hp Stator b -phase 60 Hz 4-poles 00V-08V Y P1=,50KW -phase 60 Hz 4-poles 00V-08V Y P=,40kW/,0hp Stator b -phase 60 Hz 4-poles 400V Y P1=,50KW -phase 60 Hz 4-poles 400V Y P=,40kW/,0hp Stator b -phase 50 Hz 4-poles 80V Y 0V D P=kW -phase 50 Hz 4-poles 80V Y 0V D P1=,0KW Stator b -phase 50 Hz 4-poles 550V Y P=kW -phase 50 Hz 4-poles 550V Y P1=,0KW Stator b -phase 60 Hz 4-poles 0V-40V Y// 460V YSER P1=,50KW -phase 60 Hz 4-poles 0V-40V Y// 460V YSER P=,40kW/,0hp Stator 1-10-b 1-phase 50 Hz -poles 0V-40V P=1,50kW Stator 1-10-b 1-phase 60 Hz -poles 0V-40V P=1,40kW/1,90hp 1-phase 60 Hz -poles 0V-40V P1=1,80KW 1-phase 60 Hz -poles 0V-40V P=1,70kW/,0hp Stator 1-10-b 1-phase 60 Hz -poles 0V-40V P=1,40kW/1,90hp 1-phase 60 Hz -poles 0V-40V P1=1,80KW 1-phase 60 Hz -poles 0V-40V P=1,70kW/,0hp Stator b 1phs 1-phase 50 Hz 4-poles 0V-40V P=1,0kW Qty/Version Cable tie 00X.4 PA 6/ Motor cable subcab 4G1,5+X1,5 * * * * Motor cable subcab 7G,5+X1,5 * * * * Motor cable subcab SX1,5+X1,5/+S(X0,5) 1 1 * * * * Motor cable subcab 4G,5+X1,5 * * * * Motor cable subcab SX,5+X,5/+S(4X0,5) Motor cable unit SUBCAB 4G1,5+x1,5 1 * * * * Motor cable subcab 4G1,5 * * Motor cable subcab 4G,5 * * Flygt 068 Parts List 9
31 Drive and Hydraulic Units Pos. No Part. No Type Denomination Qty/Version Motor cable silicone 4G,5 * * 4, Terminal block 4 4, Terminal block Cable unit Cable unit Leakage sensor (FLS) Leakage sensor (FLS) (Ex) Bearing holder GG Bearing holder GD-AL Bearing holder GG (Ex) Bearing holder GG Ball bearing 5X6X Ball bearing 0X5X15 MM O-ring 59.5X FPM Bearing cover Bearing cover Mechanical seal ALO/CARBON Mechanical seal WCCR/WCCR Mechanical seal ALO/CARBON Mechanical seal ALO/CARBON Hex.socket hd screw M6X0-A Oil housing bottom FOR STANDARD SEAL Oil housing bottom FOR SLURRY SEAL O-ring 1.X.4 FPM Hex.socket hd screw Mechanical seal WCCR/ALO Mechanical seal WCCR/WCCR Mechanical seal RSIC/RSIC Mechanical seal WCCR/WCCR Mechanical seal WCCR/WCCR Mechanical seal WCCR/ALO O-ring 18.5X NBR Hex.socket hd screw M1X45-A Sleeve Gland screw Plain washer 10-A4-170HV Ring Level switch Clip DIAM Hexagon nut M4-A Protective cap Slotted head screw M4X10-A Retaining ring SGH Flygt 068 Parts List
32 Drive and Hydraulic Units Pos. No Part. No Type Denomination Qty/Version Retaining ring SGH Sealing washer DUBO NR Sticker Plain washer (10)- MM Seal sleeve (14)-16 MM Seal sleeve (16)-18 MM Seal sleeve (18)-0 MM Seal sleeve (0)- MM Seal sleeve (10)-1 MM Seal sleeve (10)-1 MM Seal sleeve (1)-14 MM Cable clip (14)-16 MM Cable clip (16)-18 MM Cable clip (18)-0 MM Cable clip (0)- MM Cable clip (10)-1 MM Cable clip (1)-14 MM Shrink hose ID=. MM * * * * Shrink hose ID=1 MM * * * * Gland screw FOR CABLE ENTRY Cutting screw TAPTITE-M6X Cable lug INSUL.UL/CSA MM Cable lug UL/CSA MM Terminal block Terminal block Terminal block Closed-end splice (AWG 8) L= Closed-end splice -6(AWG 1-10) L= Terminal block Terminal block Terminal block Terminal block Closed-end splice (AWG 8) L= Closed-end splice -6(AWG 1-10) L= Terminal block Terminal block Terminal block Terminal block Terminal block Flygt 068 Parts List 1
33 Drive and Hydraulic Units /170/180/890, hydraulic unit Pos. No Part. No Type Denomination Hex.socket hd screw M1X45-A Sleeve 1 Qty/Version Impeller 0 HT 50Hz -phase Impeller 4 HT 50Hz -phase Impeller 0 HT 50Hz -phase 0HT 50Hz 1-phase Impeller 51 HT 50Hz -phase Impeller 5 HT 50Hz -phase 5 HT 50Hz 1-phase 5 HT 60Hz -phase Impeller 55 HT 50Hz -phase 55 HT 50Hz 1-phase 55 HT 60Hz -phase 55 HT 60Hz 1-phase Impeller 56 HT 60Hz -phase Impeller 57 HT 60Hz 1-phase Impeller 470MT 50Hz -phase Impeller 471 MT 50Hz -phase 471 MT 60Hz -phase Impeller 47 MT 50Hz -phase 47 MT 50Hz 1-phase 47 MT 60Hz -phase 47 MT 60Hz -phase Impeller 47 MT 50Hz -phase 47 MT 50Hz 1-phase 47 MT 60Hz -phase 47 MT 60Hz 1-phase Impeller 474 MT 50Hz -phase Impeller 475 MT 60Hz -phase Impeller 90 LT 50Hz -phase 90 LT 50Hz 1-phase 90 LT 60Hz -phase 90 LT 60Hz 1-phase Impeller 91 LT 50Hz -phase 91 LT 50Hz 1-phase 91 LT 60Hz -phase 91 LT 60Hz 1-phase Impeller 0 HT 50Hz -phase Impeller HT 50Hz -phase HT 50Hz -phase Impeller 4 HT 50Hz -phase 4 HT 50Hz 1-phase 4 HT 60Hz -phase 4 HT 60Hz 1-phase Flygt 068 Parts List
34 Drive and Hydraulic Units Pos. No Part. No Type Denomination Impeller 6 HT 50Hz -phase 6 HT 60Hz -phase Impeller 8 HT 50Hz 1-phase 8 HT 60Hz -phase 8 HT 60Hz 1-phase Qty/Version Impeller 481MT 60Hz -phase Impeller 48 MT 60Hz -phase Impeller 484 MT 60Hz -phase 484 MT 60Hz 1-phase Cutting wheel Pump housing HT C DN 50 ISO G Grey cast iron Installation: F S Undrilled HT C DN 50 ISO G Grey cast iron Installation: F S Undrilled Pump housing HT C DN 50 Sliding bracket Grey cast iron Installation: P Undrilled Pump housing HT C DN 50 Sliding bracket Grey cast iron Installation: P Undrilled Pump housing MT HT D DN 55 Grey cast iron Drilled acc. to: ANSI B ; tab.5 EN 109- tab. 9 Installation: P F S Pump housing HT MT D DN 55 Sliding bracket Grey cast iron Installation: P Undrilled Pump housing MT HT D DN 65 Grey cast iron Drilled acc. to: ANSI B ; tab.5 EN 109- tab. 9 Installation: F S P Pump housing HT MT D DN 65 Sliding bracket Grey cast iron Installation: P Undrilled Pump housing MT D DN 80 Grey cast iron Drilled acc. to: ANSI B ; tab.5 Installation: P F S Pump housing LT F DN 40 ISO G / Strainer bottom Grey cast iron Installation: S Undrilled Pump housing LT F DN 40 Sliding bracket and strainer bottom Grey cast iron Installation: P Undrilled Pump housing HT M DN 40 Grey cast iron Outlet :Horizontal Installation: P Undrilled HT M DN 40 Installation: P Undrilled Pump housing HT M DN 40 Grey cast iron Outlet :Horizontal Installation: P Undrilled Pump housing HT M DN 40 ISO G / Grey cast iron Installation: P X Undrilled Pump housing HT M DN 40 ISO G / Grey cast iron Installation: F H Undrilled HT M DN 40 ISO G / Grey cast iron Installation: F H Undrilled 1 Flygt 068 Parts List
35 Drive and Hydraulic Units Pos. No Part. No Type Denomination Pump housing HT M DN 40 /-1/ NPT Grey cast iron Installation: F H Undrilled Cutting ring HARDENED TO 58HRC Qty/Version Plain washer Hex.socket hd screw M8X0-A Wear ring A=6;B=67;C= Parallel key 5X5X5-A4-0HB Slotted head screw M6X0-A4-70 LT Hexagon head screw M1X0-A Strainer bottom POLYETHYL. PEHD Strainer bottom FOR CS 068 EXTRA HOLES Suction cover Suction cover Stud LT Hex.socket hd screw M6X5-A Seal sleeve O-ring 19.X5.7 NBR Hexagon nut M6-A Washer 0. MM Washer Seal ring PERBUNAN HT C Seal ring HT MT D Seal ring PERBUNAN, GREY HT 4 Flygt 068 Parts List
36 4 Installation Components 4 Installation Components 4.1 CF CF / Flygt 068 Parts List 5
37 4 Installation Components 4. CP 6 Flygt 068 Parts List
38 4 Installation Components 4. DF DF Flygt 068 Parts List 7
39 4 Installation Components 4.4 DP 80 mm DP Flygt 068 Parts List
40 4 Installation Components 65 mm DP , 65mm Flygt 068 Parts List 9
41 4 Installation Components 4.5 DS DS Flygt 068 Parts List
42 4 Installation Components 4.6 FP FP / Flygt 068 Parts List 41
43 4 Installation Components 4.7 FS FS / Flygt 068 Parts List
44 4 Installation Components 4.8 MF Alternative 1 MF Flygt 068 Parts List 4
45 Installation Components Alternative MF Flygt 068 Parts List
46 4 Installation Components Alternative MF Flygt 068 Parts List 45
47 4 Installation Components 4.9 MP Alternative 1 MP Flygt 068 Parts List
48 4 Installation Components Alternative MP Flygt 068 Parts List 47
49 4 Installation Components /170/180/890 Pos. No Part. No Type Denomination Sliding bracket FP "LT"; BP "HT"; DP "LT" Qty/Version LT F DN 40 Grey cast iron Sliding bracket DP "MT/HT" Hydraulic: D DN Sliding bracket DP "MT" MT Hydraulic: D DN Discharge con.stat. IN/OUT 50/R" Nipple and flange Hydraulic: C Thread : ISO-GA Inner DN 50 Ordered separately HT Hydraulic: C Thread : ISO G Inner DN 50 Ordered separately Discharge connection NPT -8 HT Hydraulic: C Thread : -8 NPT Inner DN 50 Ordered separately Discharge connection IN/OUT 50/50 MM Discharge connection IN/OUT 50/50 MM Hydraulic: C F Thread : NPT -1/ Inner DN 50 Ordered separately Hydraulic: C F Thread : ISO G Inner DN 50 Ordered separately Discharge connection UNDRILLED Hydraulic: D DN 65 Ordered separately Discharge connection IN/OUT 65/65 MM Discharge con.stat. RIGHT DIAMETER Discharge con.stat. LEFT DIAMETER 65 Hydraulic: D DN 65 Ordered separately Top 100 TOP 150 DN 65 Ordered separately Top 100 TOP 150 DN 65 Ordered separately Discharge con.stat. DIAMETER 65 TOP 65 MT DN 65 Ordered separately Discharge con.stat. IN/OUT 50/50 MM Discharge con.stat. IN/OUT 50/50 MM Discharge con.stat. IN/OUT 80/80 MM Discharge con.stat. IN/OUT 80/80 MM Discharge con.stat. IN/OUT 80/80 MM Discharge con.stat. IN/OUT 80/80 MM Discharge connection IN/OUT 50/50 MM Discharge connection IN/OUT 50/50 MM TOP 50 TOP 65 Thread : ISO G Inner DN 50 Ordered separately TOP 50 TOP 65 Thread : NPT -11 1/ Inner DN 50 Ordered separately MT Hydraulic: D DN 80 Ordered separately MT Hydraulic: D DN 80 Ordered separately MT Hydraulic: D DN 80 Ordered separately MT Hydraulic: D DN 80 Ordered separately Hydraulic: C F Thread : NPT -1/ Inner DN 50 Ordered separately Hydraulic: C F Thread : ISO G Inner DN 50 Ordered separately Discharge connection Hexagon head screw M16X40- A Hexagon head screw M16X60- A4-70 MT Plain washer 16-A4-A Guide bracket unit GALVANIZED " Optional 48 Flygt 068 Parts List
50 4 Installation Components Pos. No Part. No Type Denomination Qty/Version Guide bracket unit SS Optional Hexagon nut M16-A Gasket Stud Foot Hexagon head screw M1X0- A Spring washer DIN 18-A-1-A Hex.socket hd screw M1X80-A Plain washer (14)-16MM Sleeve NBR Sleeve SS Hex.socket hd screw M1X Elbow pipe MALLEABLE CAST IRON HT C Sliding bracket HT C DN 50 Sliding bracket Grey cast iron Installation: P Undrilled Nipple pipe CONN. 80 GALV Discharge connection Installation P Nipple and flange Hydraulic: C Thread : ISO-GA Inner DN 50 Ordered separately Optional Flange DN 80 Discharge connection Installation P Nipple and flange Hydraulic: C Thread : ISO-GA Inner DN 50 Ordered separately Optional Discharge connection Manure LT Hydraulic: F DN Coupling Seal ring MT Hydraulic: D Discharge connection Installation F Rubber feet Hydraulic: D DN 75 Undrilled Installation F Hydraulic: D DN 75 Undrilled Installation S Strainer bottom Hydraulic: D DN 75 Undrilled Discharge connection ISO G Strainer bottom Hydraulic: D Thread : ISO-GA Outer DN 75 Undrilled Installation F Hydraulic: D Thread : ISO-GA Outer DN 75 Undrilled Installation F Rubber feet Hydraulic: D Thread : ISO-GA Outer DN 75 Undrilled Flygt 068 Parts List 49
51 4 Installation Components Pos. No Part. No Type Denomination Discharge connection -8 NPSM Installation F Hydraulic: D Thread : -8 NPSM Outer DN 75 Strainer bottom Hydraulic: D Thread : -8 NPSM Outer DN 75 Undrilled Installation F Rubber feet Hydraulic: D Thread : -8 NPSM Outer DN 75 Undrilled Qty/Version Coupling POLYPROPYLENE PP R Nipple pipe CONN. 50, L=180 MM Coupling part Coupling part T-pipe 40X40X Elbow pipe MALLEABLE CAST IRON HT C Coupling Nipple pipe CONN. 40 L=180 MM Optional Coupling part Optional Quick coupling: Storz Coupling part DN 5 INNER THREAD /" Optional Quick coupling: Storz Hex.socket hd screw M1X45-A Plug DN 5 HT M Hexagon nipple DN 50 (") HT C T-pipe 50X5X50 HT C Plug DN 5 HT M Hexagon nipple DN 40 (/") HT M Clip Clip Hexagon head screw M8X65-A Hexagon nut M8-A Conversion unit Starter -phase 50/60Hz 80V - 415V Current range,5-4a Thermo contact supervision Phase sequence indicator Supply connection CEE 5- PLUG 16A Not CSA approved Starter -phase 50/60Hz 80V - 415V Current range 4-6,A Thermo contact supervision Supply connection CEE 5-PLUG 16A Starter -phase 50/60 Hz 80V V Current range:,50-4 A Thermal contact supervision Supply connection CEE 5-PLUG A Starter -phase 50/60 Hz 80V V Current range: 4-6,0 A Thermal contact supervision Supply connection CEE 5-PLUG A Starter 1.5 KW 0 V/50 HZ 50 Flygt 068 Parts List
52 4 Installation Components Pos. No Part. No Type Denomination Qty/Version Starter 1. KW 0 V/60 HZ Starter 156, 1. KW 0/50 HZ Starter 156, 1.5 KW 0/60 HZ 1 Flygt 068 Parts List 51
53 5 Service Parts 5 Service Parts /170/180/890 Pos. No Part. No Type Denomination Qty/Version O-ring kits O-ring kits / O-ring kits Basic repair kit Basic repair kit Basic repair kit Basic repair kit Basic repair kit Oil ISO VG * * * * 5 Flygt 068 Parts List
Parts List _2.1. Flygt /.890
Parts List 886754_2. Flygt 3069 3069.70/.890 Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. The data plate...3 2.2 Approvals...4 2.3
More informationParts List _2.1. Flygt /.190
Parts List 886747_2. Flygt 3069 3069.60/.90 Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. The data plate...3 2.2 Approvals...4 2.3
More informationFlygt /190. Parts List
Flygt 3127.160/190 Parts List Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification
More informationRevision 1.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded view...
More informationRevision 1.0 Parts List Mega
Revision.0 www.grindex.com Parts List 824.390 Mega Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. Products included... 3 2.2 The data
More informationRevision 2.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3 Exploded
More informationRevision 1.0 Parts List Salvador 1~, 3~
Revision.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded
More informationRevision 3.0 Parts List Minex 1~ Minex Lite, Minex 3~
Revision 3.0 www.grindex.com Parts List 80.60 Minex ~ 80.7 Minex Lite, Minex 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included...
More informationRevision 3.0 Parts List Salvador 1~, 3~
Revision 3.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data
More informationRevision 2.0 Parts List Minette 1~, 3~
Revision.0 www.grindex.com Parts List 80.7 Minette ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3
More informationRevision 1.0 Parts List Mega
Revision.0 www.grindex.com Parts List 824.400 Mega Table of Contents Table of Contents Introduction... 2 Specially approved products...2 Product Description...3 The data plate...3 Exploded Views...4 Drive
More informationRevision 1.0 Parts List Mini
Revision.0 www.grindex.com Parts List 822.2 Mini Table of Contents Table of Contents Introduction... 2 Specially approved products...2 Product Description...3 Products included... 3 The data plate...3
More informationFlygt D 8050, 50 Hz. Technical specification
Flygt D 8050, 50 Hz Technical specification Table of Contents Table of Contents D 8050... 2 Product... 2 Denomination... 2 Process data... 2 Motor data...2 Cable...2 Monitoring equipment... 2 Material...
More informationDewatering. Series description Wilo-Drain STS 65. Submersible sewage pump
Series description Wilo-Drain STS 65 Thermal winding monitoring Max. fluid temperature: 3-40 C Cable length: 10 m Free ball passage: 65 mm Max. immersion depth: 10 m Equipment/function Thermal motor monitoring
More informationEXPlora. Introduction
Introduction EXPlora The EXPlora range is most suited to manufacturers of ancillary electrical equipment such as motors, pumps, lighting equipment, process and control gear for use in factories and plant
More informationPendant Light Fitting IEC Series 6470/2
> Available light sources high-pressure sodium lamps (HSE) metal halide lamps (HIE) halogen lamps (QT) > Versatile mounting methods > Enclosure made of saltwater-resistant aluminium www.stahl.de 11435E
More information8 Installation Equipment
8 Installation Equipment Plugs and Sockets SolConeX Series 7570, 7571 CES Series 7575, 7579, 7581 10342E00 The plugs and sockets in the CES system comply with IEC/EN 60 309-1/ -2 (CEE). The small 16 A
More informationPhone Horizontal Multistage Pumps Horizontal Stainless Steel Multistage Pumps 3, 6, 9 m³/h
Horizontal Stainless Steel Multistage Pumps 3, 6, 9 m³/h Horizontal Multistage Pumps 50 Hz Stainless Steel 3-9 m3/h Model Number Explanation Example: 3AMH2B-51 3 = m 3 /h AMH = Series 2 = # of Stages
More informationCAPACITIVE SENSORS KAS. Series 26. Level Control Food Industry Pharmaceutical Industry Semiconductor Industry Chemical Industry
CAPACITIVE SENSORS KAS Series 26 Level Control Food Industry Pharmaceutical Industry Semiconductor Industry Chemical Industry Registrier-Nr.: 1327-01 Testing laboratory accredited according to DIN EN 45001
More informationFlygt Submersible Motor Cables
Flygt Submersible Motor Cables This brochure contains an overview of the Flygt motor cable assortment. The cables are especially designed for submersible use and made of carefully selected materials. The
More information82540/ /2-way diaphragm valves
> > ort size: DN 8... 50, 1/4... 2 (ISO G/NT) > > Valve operates without differential pressure > > High flow rate > > For robust industry solutions > > Damped operation > > Suitable for vacuum > > Solenoid
More informationData sheet: Wilo-Drain TP 50 E 101/5,5 (1~230 V)
Data sheet: Wilo-Drain TP 50 E 101/5,5 (1~230 V) Pump curves Wilo-Drain TP 50 E - 50 Hz - 2900 rpm Unit Max. delivery head H max 9.5 m Max. volume flow Q max 26 m 3 /h Optimal delivery head H opt 5.0 m
More informationGear Pump Units For single-line centralized lubrication systems
1-1202-EN Gear ump Units For single-line centralized lubrication systems MFE5-KW3-2 MFE5-KW6 MFE5-BW7 These units comprising the MFE Group are designed to supply the lubricant used in intermittently operated,
More informationDMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 6 bar up to 0... 600 bar Output signals -wire: 4... 0 ma -wire:
More informationSOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm)
SOGEVAC Rotary Vane Vacuum Pumps single-stage, oil-sealed, 10-1200 m 3 x h -1 (5.9-707 cfm) 172.02.02 Excerpt from the Product Section C02 Edition March 2007 Contents General Product Range, Features and
More informationRoots pumps with a pumping speed of 280 to 840 m 3 /h: Okta 500 DUO DN1 DN B A
3.1 Vacuum generation / / Convection cooled OktaLine Okta 500 with a pumping speed of 280 to 840 m 3 /h: High-performance Roots pump with a pumping speed of 280 to 840 m 3 /h With 3-phase motor, IE2 No
More informationCircuit-Breakers for Motor Protection Series 8523/8
> Accessories Auxiliary contacts 1 NC + 1 NO or 2 NC + 2 NO Undervoltage trip Shunt release > Switch operation with knop > Secure switching > Clear switch setting indicator > Different current setting
More informationDMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter Nominal pressure from 0... 6 bar up to 0... 600 bar Output
More informationCM MTC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068-0050 319-556-7484 / Fax 319-556-1235 CM-2400-0MTC PARTS LIST ENGINE OIL GRADE: ENGINE OIL CAPACITY: PUMP OIL: PUMP OIL CAPACITY: NOZZLE SIZE: 30W 21 oz. MI-T-M #AW-4085-0016
More informationAnalog Input Module HART Ex i / I.S. Inputs, 8 Channels Type 9461/
> 8 channels for 2-wire HART transmitters > Intrinsically safe inputs Ex ia IIC > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit > Module
More informationData sheet: Wilo-Drain TP 65 E 114/11 (1~230 V)
Data sheet: Wilo-Drain TP 65 E 114/11 (1~230 V) Pump curves Wilo-Drain TP 65 E - 50 Hz - No. of poles: 2 Unit Max. delivery head H max 15.0 m Max. volume flow Q max 52.0 m 3 /h Optimal delivery head H
More informationPendant Light Fittings Series 6050
> Saltwaterresistant enclosure, aluminium alloy, optionally with painting > Maintenancefree operation and long service life with induction lamp or LED > Mounting with ring bolts or tiltable mounting bracket
More information7 Lighting Technology
7 Lighting Technology Floodlight 09676E00 explosion protected floodlight for use in explosive gas atmospheres of Zone 2 as well as in areas with combustibledust of Zone 21 and Zone 22. Explosion protection
More informationSOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm) Central Vacuum Supply Systems
SOGEVAC Rotary Vane Vacuum Pumps single-stage, oil-sealed, 10-1200 m 3 x h -1 (5.9-707 cfm) Central Vacuum Supply Systems 172.02.02 Excerpt from the Product Section C02 Edition 2010 Contents General Product
More informationAnalog Input Module HART Ex n Inputs, 8 Channels Series 9461/15
> 8 channels for 2-wire HART transmitters > Inputs for Ex nl, Ex na and Nonincendive > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit >
More informationAristoMig U320w 208/230/400/460/475/500 V 3~ 50/60 Hz With cooling unit and central connection
Spare parts list Edition 060727 Valid for serial no. 310 -xxx -xxx, 445 -xxx -xxx, 620 -xxx -xxx The AristoMig 450 power source is renamed: New name Old name Mig 4500i AristoMig 450 Mig U4500i AristoMig
More informationPARTS LIST FOR CM-1250-A/C 1.5 HP
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR CM-1250-A/C Motor Specs: Pump Oil: Pump Oil Capacity: Nozzle Size: 1.5 HP / 1 Phase / 115 Volts Mi-T-M #AW-4085-0016
More information3M Distribution Box (DDB)
3M Distribution Box (DDB) Merged Copper and Fiber Pole/Post Mount Enclosure Installation Instructions November 2015 78-0015-2736-1-A 2 November 2015 78-0015-2736-1-A Contents 1.0 General 2.0 Enclosure
More informationContactor 4 kw / 400 V with 3 Main Contacts and max. 4 Auxiliary Contacts Series 8510/122
www.stahl.de with 3 Main Contacts and max. 4 Auxiliary Contacts > Screw fastening version robust vibration resistant reliable > Corrosion resistant enclosure material > Easily accessible connection terminals
More informationOperating instructions
108183 2017-05-17 Page 1 0359 Operating instructions TPPL-EX series Hazardous environments luminaires Please read the instructions carefully before starting any works! Content: 1. Safety instructions 2.
More informationGOYEN PILOT VALVE ENCLOSURES FOR HAZARDOUS LOCATIONS CLEAN AIR SOLUTIONS PRODUCT LEAFLET
PILOT VALVE ENCLOSURES FOR HAZARDOUS LOCATIONS CLEAN AIR SOLUTIONS 3-6VFD COMBINATION FLAME AND DUST IGNITION PROOF ENCLOSURES Goyen pilot valve enclosures for hazardous locations are available in a combination
More informationLevel Measurement Point level measurement - RF Capacitance switches
Overview Configuration Installation Standpipes 50 (2) 20 (0.79) max. is a compact, 2-wire, inverse frequency shift capacitance switch for level and material detection in constricted spaces, interfaces,
More information3.3. Ex-Escape sign luminaires. Ex-Lite Metal version with LED technology for Zone 1 and Zone 21 / NEC applications
. Ex-Escape sign luminaires Ex-Lite Metal version with LED technology for Zone 1 and Zone 21 / NEC applications The robust escape sign luminaire The Ex-Lite series of explosion-protected escape sign luminaire
More informationGear Pump Units. For single-line lubrication systems
Gear Pump Units 1-1202-US For single-line lubrication systems MFE5-KW3-2 MFE5-BW3-2 MFE5-KW6 MFE5-BW7 These units comprising the MFE Group are designed to supply the lubricant used in intermittently operated,
More informationSMALL OIL SEALED PUMPS
SMALL OIL SEALED PUMPS PERFORMANCE YOU CAN RELY ON EM0.7 and.5 Oil Sealed Rotary Vane Pumps 8 RV Oil Sealed Rotary Vane Pumps 86 RV ATEX Oil Sealed Rotary Vane Pumps 94 EM8 and 8 Oil Sealed Rotary Vane
More informationInductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationInductive sensor BI1.5-EG08K-Y1
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationPDP Series. Positive displacement dosing pump. Sandwich hydraulic diaphragm type with an internal relief-refilling valve SDI. The right dosing choice
PDP Series Positive displacement dosing pump Sandwich hydraulic diaphragm type with an internal relief-refilling valve SDI The right dosing choice PDP Series SUPPORTING ELEMENTS OF OUR PRODUCTS Versatility
More informationEXEL. Ex de. - Double locking system operated by hexagonal-head tool - Double channel electronic ballast - Zones 1, 2, 21, 22. G13 bi-pin lamp holder
EXEL - Double locking system operated by hexagonal-head tool - Double channel electronic ballast - Zones 1, 2, 21, 22 Reinforced polyester resin body G13 bi-pin lamp holder Internal emergency batteries
More informationInstallation instructions Cable transit device Roxtec RS ES Ex
General information Installation and maintenance: For European member countries of GENELEC, shall standard EN 60079-14 and EN 60079-17 be considered. For countries members of IECEx shall standard IEC 60079-14
More informationScrew pump Series ALLFUEL AFT
Screw pump Series ALLFUEL AFT Utilization For pumping light and heavy fuel oil. Main field of application ALLFUEL Transfer (AFT) pumps are compact pump sets designed for closed circuit and transfer applications
More informationEXLUX ECOLUX 6480 Series
EXLUX ECOLUX 6480 Series L I G H T I N G 6000 6008 6400 6408 6600 6608 6480 Explosion Protected Fluorescent Luminaires for Hazardous and Corrosive Applications Features: Electronic Ballasts For Fluorescent
More informationGRUNDFOS alldos product information. The solution for complex dosing tasks
GRUNDFOS alldos product information The solution for complex dosing tasks Measurements Measurements a h d Electric actuator b Pneumatic actuator g e Ø 9mm k f i m 1 m 2 k j c n l 1 l 2 DMH model Measurements
More informationSingle Point Flow Monitor SW118 SW119
SW8 SW9 SW8 SW9 Single point flow monitors with MIN/MAX monitoring function, suitable for water, oil, air and media with similar thermal conductivities (selectable by means of a medium switch). With either
More informationSITRANS F flowmeters SITRANS F M. Transmitter MAG 6000 I/6000 I Ex d e 4/43
Overview The MAG 6000 I/I Ex d transmitter is designed for the demands in the process industry. The robust die cast aluminium housing provides superb protection, even in the most harsh industrial environments.
More informationSeries description: Wilo-Sub TWU 3 HS
Series description: Wilo-Sub TWU 3 HS Design Submersible pump, multistage Application For private water supply from boreholes, wells and rainwater storage tanks For domestic water supply, sprinkling and
More informationSIDE CHANNEL BLOWERS. Voltage Δ / Y 2 V 230/ / / / / /460 - Current Δ / Y Revolutions
DB411/415/422/ DESCRIPTION Dutair blowers for pressure and vacuum are compact machines consisting of an electric motor with a built-on pump housing. The rotational speed of the impeller creates a high
More informationLevel Measurement Point level measurement RF Capacitance switches
Siemens AG 2018 Overview Configuration Installation Standpipes 50 (2) 20 (0.79) max. is a compact, 2-wire, inverse frequency shift capacitance switch for level and material detection in constricted spaces,
More informationI Ex-protected connectors exlink I
Y-Junction-box Technical data Y-Junction-box / Marking to 94/9/EC II 2 G Ex de IIC T6/T5 / II 2D Ex td A21 T80 C/ T95 C EC-Type Examination Certificate PTB 05 ATEX 1084 IECEx-Certificate of Conformity
More informationOkta 600, Roots pump, 230/400 V, 50 Hz; 265/460 V, 60 Hz
Okta 600, Roots pump, 230/400 V, 50 Hz; 265/460 V, 60 Hz Okta 600, Roots pump, 230/400 V, 50 Hz; 265/460 V, 60 Hz Similar Image Dimensions Technical Data Ambient temperature 5-40 C Cooling method, standard
More informationInstallation Manual IPT Installation of skillet systems with 125 A track current. MV a-E.
www.wampfler.com Page 1 of 27 Index Page 1 Basics...4 2 Basic understanding of an IPT -system...5 3 General rules regarding metal parts in close proximity...6 3.1 Envelope free of ferromagnetic material...6
More informationCoils for solenoid valves
MAKING MODERN LIVING POSSIBLE Technical leaflet Coils for solenoid valves www.danfoss.com B and A coils Encapsulated coils with long operating life, even under extreme conditions Standard coils for a.c.
More informationInductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationProduct Data Sheet 4656 ZW
The engineer's choice 4656 ZW INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
More informationInstallation instructions Roxtec RS ES Ex
General information Installation and maintenance: For European member countries of GENELEC, shall standard EN 60079-14 and EN 60079-17 be considered. For countries members of IECEx shall standard IEC 60079-14
More informationTYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-12360 This is to certify that the Cable Gland with type designation(s) ADE & RE; AD; FF; MM; SP; ET; LN. Manufactured by COOPER CAPRI SAS
More informationDS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections
Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing Description The electronic pressure switch is the successful combination of hygienic process connections with flush welded
More informationINSTRUCTION MANUAL AND PARTS LIST
7360R-2SS INSTRUCTION MANUAL AND PARTS LIST 1. COVER COMPONENTS Ref. No Part No. Name Qty 1 100 1400 Face plate arm 1 2 100 1401 Gasket 1 3 100 1287 Rubber plug (ɸ19) 1 4 100 1288 Rubber plug (ɸ11.8)
More information2179-CD Series Fiber Optic Splice Closure. Installation Instructions
2179-CD Series Fiber Optic Splice Closure Installation Instructions 1.0 Product Introduction The new 3M TM 2179-CD Series Fiber Optic Splice Closure can be used in buried, underground, aerial, and pedestal
More informationImmersion Pumps HCT (High Chem) sealless EN
Immersion Pumps HCT (High Chem) sealless 1 6004 EN Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 120 l/min Delivery head H max = 32 m Temperature
More informationInductive sensor With analog output BI15-M30-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M30 x 1.5 Chrome-plated brass 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection Wiring Diagram Type designation
More informationRCA3 SOLENOID PILOT VALVES PENTAIR CLEAN AIR SYSTEMS
RCA3 SOLENOID S PENTAIR CLEAN AIR SYSTEMS GOYEN RCA3D REMOTE PILOT Remote solenoid pilot valve to control the actuation of dust collector diaphragm valves. RCA3D with flying lead connection INSTALLATION
More informationEx td A21 IP66 T58 C. max. 3 x 4 mm 2 or 1 x 10 mm 2 with pin cable lug + 1 x 2.5 mm 2 fine wire. max. 4 x M20 metal thread
I Ex-junction box I GHG 791 001 R0001 GHG 791 001 R0006 GHG 791 0101 R000 GHG 791 0101 R0001 Technical data GHG 791 01 up to 6 terminals / GHG 791 0 up to 8 terminals Marking accd. to 94/9/EC II G Ex dem
More informationProduct Data Sheet 4656 EZ
The engineer's choice 4656 EZ INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
More information9 Control Equipment. Measurement- and Control Equipment Series 8214, 8218
9 Control Equipment Measurement- and Control Equipment Series, Explosion protection to CENELEC IEC Can be used in Zone 1 and Zone 2 Designed for panel mounting Enclosure material : Polyester resin : Aluminium,
More informationSeries description: Wilo-Jet HWJ
Series description: HWJ 2 Design Self-priming water-supply unit Application Water supply Sprinkling Irrigation and spraying Pumping water from wells and out of low-lying tanks Type key Example: H WJ HWJ
More informationHigh Head Close-Coupled Centrifugal Pumps
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationInstallation instructions Ex frames
General information Installation and maintenance: For European member countries of GENELEC shall standard EN 60079-14 and EN 60079-17 be considered. For countries members of IECEx shall standard IEC 60079-14
More informationGV2ME086 TeSys GV2 - Circuit breaker - thermal-magnetic A - lugs-ring terminals
Product data sheet Characteristics GV2ME086 TeSys GV2 - Circuit breaker - thermal-magnetic - 2.5...4 A - lugs-ring terminals Main Range Product name Device short name Device application Trip unit technology
More information1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control
IEC Contactors and Starters. XT Family of Contactors Contactors and Starters Product Description The Eaton XT contactors and starters includes nonreversing and reversing contactors, overload relays and
More informationSpring Return dosing pump FM - mechanical diaphragm
SR Series Spring Return dosing pump FM - mechanical diaphragm The right dosing choice SR Series Type FM SOME REASONS TO PREFER OUR PRODUCTS Versatility A wide range of models and executions are available
More informationExplosion Proof Audible Signal db(a) Series YA60
> Omnidirectional high output sounder 110 db (A) / 1 m > 2 stage alarm, independently selectable 2nd stage > IP66 rated as standard > Aluminium enclosure with stainless steel fasteners > 32 selectable
More informationLINEAR ACTUATORS. Type S / SH 95, S / SH 80, S / SH 71, S / SH 56
LINEAR ACTUATORS Type S / SH 95, S / SH 80, S / SH 71, S / SH 56 moving As one of the leading manufacturers of electrical and electronic drive components and systems we offer you a wide product range for
More informationEXLUX ECOLUX C-LUX 6480 Series
EXLUX ECOLUX C-LUX 6480 Series 6000 6008 6400 6408 6600 6608 6500 6480 Explosion Protected Fluorescent Luminaires for Hazardous and Corrosive Applications Features: Electronic Ballasts For Fluorescent
More informationDMP 331i DMP 333i. Precision Pressure Transmitter. Stainless Steel Sensor. accuracy according to IEC 60770: 0.1 % FSO
DMP i DMP i Precision Pressure Transmitter Stainless Steel Sensor accuracy according to IEC 600: 0. % FSO from 0... 00 mbar up to 0... 600 bar Output signal wire:... 0 ma wire: 0 0 V others on request
More informationOperation and Maintenance Guide Electric Needle Scalers
Operation and Maintenance Guide Electric Needle Scalers Models Covered Model Number ENS100V ENS200V Electric Needle Scaler, 110V-1ph Electric Needle Scaler, 220V-1ph Description IMPA Number 59 12 01 59
More information1.2 EUREKA Series... from page c.14
.2 EUREKA Series................................................................................................. from page c.4 This latest generation of industrial plugs, connectors and socket outlets
More informationGENERAL CATALOGUE EN013 E C
GEERL CTLOGUE F H E013 E C L IDEX Certifications page 3 Foot mounted electric vibrators MVSI MVSI-TS MVSI-CC MVSI-E MVSS CDX MVTX MICRO M3 M3-E MVCC Electric vibrators page 6 Electric vibrators with split
More informationDMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0,35 % FSO. Nominal pressure
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0,5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
More informationImmersion Pumps HCT (High Chem) sealless
Immersion Pumps HCT (High Chem) sealless 1-6004-US Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 120 l/min Delivery head H max = 32 m Temperature
More information820 NOVA 820 NOVA. 1 Control knob. 2 Pressure regulator cap screw 3 Pilot gas rate adjuster 4 Thermocouple connection
MAIN FEATURES Control knob with Off, Pilot and On positions. Thermoelectric flame supervision device with re-start interlock. Near silent shut-off valve. Servo-controlled pressure regulator. Step opening
More informationExplosion Proof Audible Signal db(a) Series YA60
> Omnidirectional high output sounder 110 db (A) / 1 m > 2 stage alarm, independently selectable 2nd stage > IP66 rated as standard > Aluminium enclosure with stainless steel fasteners > 32 selectable
More informationMedium Box for Cable Termination
FIST-MB2-T I N S T A L L A T I O N I N S T R U C T I O N Medium Box for Cable Termination Contents 1 Introduction 1.1 Product description. 2 General 2.1 Tools 2.2 Kit contents 3 Installation and pre assembling
More informationwww.mete-enerji.com.tr INDUSTIAL IEC PLUGS AND SOCKETS INDUSTIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 225/400-265/460 V~ 60 Hz (1) 3 P+N+ 3 P+ 2 P+ 120/208-144/250V~
More informationFOSC 450 C6 and D6 Closures
FOSC 450 C6 and D6 Closures I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closure 1. General Product Information The FOSC 450 C6 and D6 fiber optic splice closures use compressed gel
More informationAC diagonal module Ø 200 mm
max. 850 m /h C diagonal module Ø 00 mm Material: Housing: Plastic P Support bracket: Plastic P Impeller: Plastic P Rotor: Coated in black Number of blades: 7 Direction of air flow: "V" Direction of rotation:
More informationDS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection
with Flush Process Connection piezoresistive pressure sensor up to independent contacts, configurable optional: analogue output Exprotection (for wire) cooling element up to 00 C nominal pressure ranges
More informationLighting: Fluorescent Lighting FD Series: Cylindrical Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Flameproof
ighting: Fluorescent ighting FD Series: Cylindrical Fluorescent ighting Fixtures, Standard and Emergency Battery Back-Up Flameproof 2 x 58 W Compliance Data: ATEX IECEx: ATEX IECEx CE Ex d IIB Ex d IIC
More informationFIST-MB2-S. FIST Medium Box for Cable Splicing Only. 4 Cable installation. 1 Introduction. Contents. 2 General. 5. Fiber routing to individual trays
FIST-MB2-S I N S T A L L A T I O N I N S T R U C T I O N FIST Medium Box for Cable Splicing Only Contents 1 Introduction 1.1 Product description 2 General 2.1 Tools 2.2 Kit contents 3 Installation and
More informationUp to 85% higher Service Life due to efficient sealing method.
Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348
More information