MANUAL CABLE MARKING SYSTEM PMP-30 PUSH-IN CABLE MARKERS WITH HOLDERS
|
|
|
- Lucinda Parsons
- 5 years ago
- Views:
Transcription
1 MANUAL CABLE MARKING SYSTEM Provides alternative manual systems for identifying cables, tubes, conduit, components and equipment. PMP push-in cable markers for use with PM transparent holders RMS and FMS push-on ring cable markers & flat ring markers SM snap-on cable markers KM wraparound, self laminating cable markers PMP-30 PUSH-IN CABLE MARKERS WITH HOLDERS PMP markers are very simple to use: the appropriate characters are collected in order on the insertion tool then pushed into the transparent holder mounted on the cable. 72
2 PUSH-ON RING CABLE MARKERS & FLAT RING MARKERS RMS push-on ring cable markers available in four range-taking sizes formarking cables with external diameters from 1,3 to 16mm ( 0.05 to 0.62 in.) FMS flat ring markers printed black on yellow, push onto tie-on carriers for attachment to large diameter cables, etc. SNAP-ON CABLE MARKERS Minimum overall size snap-on cable markers are particularly useful for applications where there is limited space between cables. It is unquestionably the best solution for small cross section conductors and for local network cables and can be fitted even after the conductors are connected. Indispensable for identifying already completed wiring! WRAPAROUND SELF LAMINATING CABLE MARKERS Can be used for identifying not only cables, but also tubes and conduit with diameters up to 38 mm (1.49 in.) MANUAL SYSTEM STRIPS & LABELS Adhesive pre-printed strips for the temporary or permanent marking of insulated and uninsulated conductors. Alphanumeric signs in PVC film. 73
3 PMP-30 PUSH-IN CABLE MARKERS Polyamide, in strips Marker width 3 mm. 20 markers per strip - 30 C + 90 C Colour Code Description Quantity PMP markers are very simple to use: the appropriate characters are collected in order on the insertion tool then pushed into the transparent holder mounted on the cable. Once inserted, the characters are protected from degradation by water, alcohol, acids, alkalis and numerous solvents. Characters are available printed in black on white or yellow backgrounds, or colour coded according IEC Standard 757. PM transparent marker holders can be premounted on cables for later insertion of marking characters without affecting the wiring. PM transparent holders, in seven range-taking sizes, for identifying cables from 0,10 to 240 mm 2. PM-ET self adhesive transparent holders for identifying components and equipment. Material: Polyamide 6.6, self extinguishing. Excellent stability and mechanical strength, high temperature resistance Operating temperature range - 30 C to + 90 C - 22 F to F white yellow A to Z + - = / Ø 0 to 9 PLS MNS EQL STK DIA GND., : DOT COM CLN DELTA STAR AC A to Z + - = / Ø 0 to 9 PLS MNS EQL STK DIA GND., : DOT COM CLN DELTA STAR AC alphanumeric add the character alphanumeric add the character black black unprinted 500 brown brown unprinted 500 red red PLS 500 red unprinted 500 orange orange unprinted 500 yellow yellow unprinted 500 green green unprinted 500 blue blue MNS 500 blue unprinted 500 violet violet unprinted 500 grey grey unprinted 500 white white unprinted 500 WARNING: Markers with electrical symbols are identified by the following suffixes: PMP AC use with PM transparent holders page 98 PM-L transparent holders 101 PM-AC transparent holders 103 PM-ET transparent holders 103 PM-DT transparent holders
4 - 30 C + 90 C Marker width 3 mm. 20 markers per strip Code PUSH-IN CABLE MARKERS Polyamide, in strips Quantity PMP PMP PMP PMP PMP PMP PMP PMP PMP PMP PMP PMP R 500 PMP S 500 PMP T 500 PMP U 500 PMP V 500 PMP W 500 PMP X 500 PMP Y 500 PMP Z 500 PMP N 500 PMP PLS 500 PMP MNS 500 PMP EQL 500 PMP AC 500 PMP GND 500 PM Cable ext. Ø range 2 3,7mm; c.s.a range 0,5 2,5mm PM Cable ext. Ø range 3,5 4,3mm; c.s.a range 2,5 4mm PM Cable ext. Ø range 4 6,3mm; c.s.a range 4 10mm PM Cable ext. Ø range 6 10mm; c.s.a range10 25mm PMP-ST Carrier 1 PMP-SMT Insertion tool 1 The kit contains: 25x different PMP-30 characters, black on white (numbers, letter and symbols in strips of 20 markers, bags of 500) 4x sizes of PM transparent holders, length 12mm, for cables nominal c.s.a 0,5 to 25 mm 2 1x PMP-ST carrier set for 25 strips 1x insertion tool PMP-SMT length 15 mm Operating temperature range - 30 C to + 90 C MANUAL SYSTEM TOOLS Model Code Tab length mm Markers Quantity ,0 PMP-30 1 PMP-SMT insertion tool ,0 PMP-30 1 PMP-ET extraction tool ,0 PMP-30 1 CARRIERS Model Code Strips accommodated Description Quantity PMP-ST for PMP Single module Carrier set 1 Each modular carrier for PMP-30 can hold 5 strips of markers. Modules may be combined ad infinitum. PMP-ST carrier set, consisting of 5 modules (for 25 strips, 500 markers) is supplied with non-slip rubber feet. The marker strip is inserted vertically, with no risk of loss of markers. 75
5 RMS-01 PUSH ON RING CABLE MARKERS alphanumeric self - 30 C extinguishing class + 90 C V0: UL 94 RMS push-on ring cable markers available in four range-taking sizes for marking cables with external diameters from 1,3 to 16,0 mm. Characters are printed in black on a white or yellow background,or according to the IEC 757 colour code for numbered or unprinted versions. Made from soft PVC, self extinguishing according to V0 (UL 94), they are chevron-cut for perfect alignment on the conductor. Characters are printed by a hot process, making a slight impression in the material to maintain indelible marking over time. Material: Soft PVC, self extinguishing according to class V0: UL 94 Operating temperature range - 30 C to + 90 C - 22 F to F WARNING: Markers with electrical symbols are identified by the following suffixes: RMS GNDP BAG OF MARKERS Cable ext. ø range 1,3 3 mm ( in.) c.s.a range 0,35 1 mm 2 (22 17 AWG) Colour Character Code white A to Z + - = / Ω., : ; * Ø yellow A to Z + - = / Ω., : ; * Ø black unprinted brown unprinted red PLS unprinted orange unprinted yellow unprinted green unprinted blue MNS unprinted violet unprinted grey unprinted white unprinted REEL OF MARKERS Cable ext. Ø range 1,3 3 mm ( in.) c.s.a range 0,35 1 mm 2 (22 17 AWG) white A to Z + - = / Ω., : ; * Ø yellow A to Z + - = / Ω., : ; * Ø
6 self extinguishing class V0: UL C + 90 C PUSH ON RING CABLE MARKERS alphanumeric RMS-02 BAG OF MARKERS Cable ext. Ø range 2,5 5 mm ( in.) c.s.a range 1,5 4 mm 2 (15 11 AWG) Colour Character Code white A to Z + - = / Ω., : ; * Ø yellow A to Z + - = / Ω., : ; * Ø black unprinted brown unprinted red PLS unprinted orange unprinted yellow unprinted green unprinted blue MNS unprinted violet unprinted grey unprinted white unprinted MANUAL SYSTEM REEL OF MARKERS Cable ext. Ø range 2,5 5 mm ( in.) c.s.a range 1,5 4 mm 2 (15 11 AWG) white A to Z + - = / Ω., : ; * Ø yellow A to Z + - = / Ω., : ; * Ø
7 RMS-03 PUSH ON RING CABLE MARKERS alphanumeric self - 30 C extinguishing class + 90 C V0: UL 94 BAG OF 500 MARKERS Cable ext. Ø range 4 10 mm ( in.) c.s.a range 4 16 mm 2 (11 5 AWG) Colour Character Code white A to Z + - = / Ω., : ; * Ø yellow A to Z + - = / Ω., : ; * Ø black unprinted brown unprinted red PLS unprinted orange unprinted yellow unprinted green unprinted blue MNS unprinted violet unprinted grey unprinted white unprinted RMT ACCESSORIES for push-on ring cable markers RMT-01 Insertion tool for RMS-01 RMT-02 Insertion tool for RMS-02 RMT-03 Insertion tool for RMS-03 Code Quantity
8 self extinguishing class V0: UL C + 90 C PUSH ON RING CABLE MARKERS alphanumeric RMS-04 BAG OF 100 MARKERS Cable ext. Ø range 8 16 mm ( in.) c.s.a range mm 2 (5 2/0 AWG) Colour Character Code white A to Z + - = / Ω., : ; * Ø yellow A to Z + - = / Ω., : ; * Ø black unprinted brown unprinted red PLS unprinted orange unprinted yellow unprinted green unprinted blue MNS unprinted violet unprinted grey unprinted white unprinted MANUAL SYSTEM 79
9 FMS PUSH-ON FLAT RING CABLE MARKERS with tie-on carriers FMS C + 90 C self extinguishing class V0: UL 94 FMS flat ring markers printed black on yellow, push onto tie-on carriers for attachment to large diameter cables, etc. Made from soft PVC, self extinguishing according to V0 (UL 94), they are chevron-cut for perfect alignment on the conductor. Characters are printed by a hot process, making a slight impression in the material to maintain indelible marking over time. Material: Soft PVC, self extinguishing according to class V0: UL 94 Operating temperature range - 30 C to + 90 C - 22 F to F WARNING: Markers with electrical symbols are identified by the following suffixes: FMS GNDP see page 106 for cable ties BAGS OF 500 MARKERS. Marker length 4 mm Colour Character Code yellow A to Z + - = / Ω., : ; * Ø unprinted FMS-40 BAGS OF 100 MARKERS. Marker length 40 mm yellow unprinted ACCESSORIES for push-on flat ring cable markers, tie width max 4,8mm FMH-7 Carrier for 7 x FMS-04 Height mm Length mm Code Quantity FMH-12 Carrier for 12 x FMS-04 or 1 x FMS FMH-18 Carrier for 18 x FMS MS-ETF For attachment by cable ties to pipes, conduits and cables with larger diameters. A permanent marker is used to hand-write data on the tag over which an adhesive, transparent film is applied for protection. Material: UV stabilized Polypropylene (PP) for tag Polyester (0-PET) for protective film Operating temperature range - 10 C to + 60 C Application temperature 10 C LAMINATED WRITE-ON TIE-ON TAGS pre-cut, one piece markers, tie-on Cable tie max width 4,8 mm. Application temperature > 10 C - 10 C + 60 C self extinguishing class V0: UL 94 Height mm Length mm Code Print area mm Quantity yellow YE 48x YE 55x YE 85x see page 106 for cable ties 80
10 - 30 C C Application temperature + 10 C + 40 C WRAPAROUND CABLE MARKERS self adhesive, self laminating, square corners, precut KM KM Wrapping diameter 6 10 mm Print area (CxB) 15x25 mm. Overall length A: 50 mm Colour Code Quantity white yellow orange red blue green Wrapping diameter 8 14 mm Print area (CxB) 25x25 mm. Overall length A: 75 mm KM white yellow orange red blue green Wrapping diameter mm Print area (CxB) 25x25 mm. Overall length A: 150 mm KM white yellow orange red blue green KM wraparound cable markers hand-printing with permanent pens (see p. 70), are suitable for identifying large diameter cables, tubes and conduit. The procedure is quick - carefully hand print on the markable coloured area then wrap the marker around the cable/tube overlapping the clear part onto the marked area to protect it from water, alcohol, dust, and chemical and atmospheric agents. The fixing margin is important as it protects the marking from contamination by the hands. Many types of marking media can be used including pencil, ballpoint pen, marker pen, etc. Material: Soft PVC film. Resistant to water, oil, grease, alcohol, detergent, alkaline substances and atmospheric agents. Self extinguishing, high resistance to UV radiation Operating temperature range - 30 C to C - 22 F to F MANUAL SYSTEM use Directly on cables, etc in accordance with wrapping diameter limitations shown for each size. 81
11 ANS WRAPAROUND CABLE MARKERS self adhesive, self laminating, square corners, precut Application temperature + 10 C + 40 C - 40 C C SELF ADHESIVE Strip size 8 x 65 mm U1 to U12 V1 to V12 W1 to W12 A to Z 0 to 9 Colour Code Strips per sheet Quantity white with black print white with black print alphanumeric add the character add the character white unprinted Adhesive pre-printed strips for the temporary or permanent marking of insulated and uninsulated conductors. ANS strips may be used in the production of electric motors as the material will withstand the oven temperatures at which the insulating resins of stators and rotors are baked. Also available with numeric and alphanumeric combinations and progressions. Material: Polyester film. Resistant to water, alcohol, oils and atmospheric agents. Excellent dimensional stability Operating temperature range - 40 C to C - 40 F to F Min. application temperature: + 10 C (+50 F) use Directly on cables 82
12 - 40 C + 80 C Application temperature + 10 C + 40 C SELF ADHESIVE ALPHANUMERIC SIGNS ANL ARR-H PLS MNS STK DOT EQL I II III V X A 1 A B SINGLE Code Size AxB mm Quantity x x x x x x x x x x x x99 5 * AR x x148 1 * AR x x210 1 * AR x210 1 *AR: Aluminium undrilled, not adhesive, made to order NOTE: Sign with letter I is narrower + MADE TO ORDER DOUBLE 1 1 AA Code Size AxB mm Quantity x x x x x x x x x x x x198 5 * AR x x296 1 * AR x x420 1 * AR x420 1 *AR: Aluminium undrilled, not adhesive, made to order NOTE: Sign with letter I is narrower Also available with numeric and alphanumeric combinations and progressions. Material: PVC film Operating temperature range - 30 C to + 80 C - 22 F to F Min. application temperature: + 10 C (+50 F) Examples of composition using the roman numerals: 4 = 6 = 7 = 8 = 9 = 11= 12= 13= 14= 16= 17= 18= 19= 20= 21= 22= 23= 24= 25= 26= 27= 28= 29= I V V I V II V III I X X I X II X III X I V X V I X V II X V III X I X X X X X I X X II X X III X X I V X X V X X V I X X V II X X V III X X I X MANUAL SYSTEM 83
13 SM-01 SNAP-ON CABLE MARKERS - 40 C +150 C SM-01 Cable markers with brown applicator. Cable ext.ø range 1 1,4 mm ( in.) and c.s.a range 0,25 0,35 mm 2 (23 22 AWG) Colour Character Code Markers per applicator Quantity Ten range-taking sizes are available for identifying conductors with diameters from 1,0 mm to 19,0 mm, corresponding to cross sections from 0,10 to 120mm 2 approximately. Markers are attached directly from their applicators, which are colour coded for different sizes. The smaller sizes, SM-01 and SM-02, provide ideal identification system for small-section cables, eg in electronic equipment, while SM-12 and SM-15 sizes are particularly recommended for identifying the connecting cables of IT networks. Packs contain either 300 or 50 markers printed black on white or yellow backgrounds or colour coded according to IEC 757. SM-06, SM-09 and SM-12 sizes are double marked for enhanced legibility. Snap-on cable markers are made from a special copolymer which provides excellent mechanical and physical characteristics, being nondegradable and non-deformable up to 105 C (221 F) and able to withstand temperatures of -40 C (-40 F). Material: POM acetylic resin, dimensionally stable to +106 C (+222,8 F), non- degradable and non-deformable to - 40 C (-40 F). Resistant to oil, grease, chemical and atmospheric agents, detergents, oxalic acids, alkaline solutions and organic and inorganic chemical substances. High elasticity combined with high rigidity, for optimal grip on the conductor. WARNING: Markers with electrical symbols are identified by the following suffixes: SM GNDP white A to Z + - /. : yellow A to Z + - /. : black unprinted brown unprinted red PLS unprinted orange unprinted yellow unprinted green unprinted blue MNS unprinted violet unprinted grey unprinted white unprinted RETROFIT? INDISPENSABLE! 84
14 - 40 C +150 C SNAP-ON CABLE MARKERS SM-02 SM-02 Cable markers with grey applicator. Cable ext.ø range 1,4 1,8 mm ( in.) and c.s.a range 0,35 0,75 mm 2 (22 18 AWG) Colour Character Code Markers per applicator Quantity white A to Z + - /. : yellow A to Z + - /. : black unprinted brown unprinted red PLS unprinted orange unprinted yellow unprinted green unprinted blue MNS unprinted violet MANUAL SYSTEM unprinted grey unprinted white unprinted RETROFIT? INDISPENSABLE! 85
15 SM-03 SNAP-ON CABLE MARKERS - 40 C +150 C SM-03 Cable markers with green applicator. Cable ext.ø range 1,9 2,65 mm ( in.) and c.s.a range 0,5 1 mm 2 (20 17 AWG) Colour Character Code Markers per applicator Quantity white A to Z + - /. : yellow A to Z + - /. : black unprinted brown unprinted red PLS unprinted orange unprinted yellow unprinted green unprinted blue MNS unprinted violet unprinted grey unprinted white unprinted RETROFIT? INDISPENSABLE! 86
16 - 40 C +150 C SNAP-ON CABLE MARKERS SM-06 SM-06 Cable markers with red applicator. Cable ext.ø range 2,6 3,5 mm ( in.) and c.s.a range 0,75 1,5 mm 2 (18 15 AWG) Colour Character Code Markers per applicator Quantity white A to Z + - /. : yellow A to Z + - /. : black unprinted brown unprinted red PLS unprinted orange unprinted yellow unprinted green unprinted blue MNS unprinted violet MANUAL SYSTEM unprinted grey unprinted white unprinted RETROFIT? INDISPENSABLE! 87
17 SM-09 SNAP-ON CABLE MARKERS - 40 C +150 C SM-09 Cable markers with blue applicator. Cable ext.ø range 3,25 4,5 mm ( in.) and c.s.a range 1,5 2,5 mm 2 (15 13 AWG) Colour Character Code Markers per applicator Quantity white A to Z + - /. : yellow A to Z + - /. : black unprinted brown unprinted red PLS unprinted orange unprinted yellow unprinted green unprinted blue MNS unprinted violet unprinted grey unprinted white unprinted RETROFIT? INDISPENSABLE! 88
18 - 40 C +150 C SNAP-ON CABLE MARKERS SM-12 SM-12 Cable markers with yellow applicator. Cable ext.ø range 4,5 6 mm ( in.) and c.s.a range 4 6 mm 2 (11 10 AWG) Colour Character Code Markers per applicator Quantity white A to Z + - /. : yellow A to Z + - /. : black unprinted brown unprinted red PLS unprinted orange unprinted yellow unprinted green unprinted blue MNS unprinted viola MANUAL SYSTEM unprinted grey unprinted white unprinted RETROFIT? INDISPENSABLE! 89
19 SM-15 SNAP-ON CABLE MARKERS - 40 C +150 C SM-15 STM applicator for SM-15 Loose cable markers. Cable ext.ø range 5,8 8,5 mm ( in.) and c.s.a range mm 2 (7 5 AWG) Colour Character Code Quantity white A to Z + - /. : yellow A to Z + - /. : black unprinted brown unprinted red PLS 50 unprinted orange unprinted yellow unprinted green unprinted blue MNS 50 unprinted violet unprinted grey unprinted white unprinted RETROFIT? INDISPENSABLE! 90
20 - 40 C +150 C SNAP-ON CABLE MARKERS SM-17 SM-17 Loose cable markers. Cable ext.ø range 8,5 11,5 mm ( in.) and c.s.a range mm 2 (3 2 AWG) Colour Character Code Quantity STM applicator for SM-17 white A to Z + - /. : yellow A to Z + - /. : black unprinted brown unprinted red PLS 50 unprinted orange unprinted yellow unprinted green unprinted blue MNS 50 unprinted violet MANUAL SYSTEM unprinted grey unprinted white unprinted RETROFIT? INDISPENSABLE! 91
21 SM-21 SNAP-ON CABLE MARKERS - 40 C +150 C SM-21 Loose cable markers. Cable ext.ø range mm ( in.) and c.s.a range mm 2 (2 2/0 AWG) STM applicator for SM-21 Colour Character Code Quantity white A to Z + - /. : yellow A to Z + - /. : RETROFIT? INDISPENSABLE! SM-24 SEGNACAVO SNAP - 40 C +150 C SM-24 Loose cable markers. Cable ext.ø range mm ( in.) and c.s.a range mm 2 (2/0 4/0 AWG) STM applicator for SM-24 white A to Z + - /. : Colour Character Code Quantity yellow A to Z + - /. : RETROFIT? INDISPENSABLE! 92
22 - 40 C +150 C APPLICATORS SMT Description Code Quantity Applicator for SM Applicator for SM Applicator for SM Applicator for SM MANUAL SYSTEM 93
Cables for robot applications
Cables for robot applications 67 Primary cables Robot primary cable Cable design Internal conductor Special conductor Strand class VI (super-fine wire) Highly flexible Core insulation TPM or PUR Core identification
PREMIUM 5e F/UTP PRODUCTS
Siemon s end-to-end cabling system is guaranteed to provide transmission performance margins in excess of industry standards for category 5e parameters, while featuring excellent EMI resistance. has been
NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM
NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM Content 1. General 5 2. The products of NC-1000 system 6 3. Mounting of the frame 8 4. Earthing of the frame 8 NC-1000 FIBRE OPTIC
-V- New. Connecting cables for valves, socket type B, industry standard Type codes Connecting cable with PUR cable sheath NEBV B2 W 3 F P K 0.
Type codes Connecting cable with PUR cable sheath NEBV B2 W 3 F P K 0.6 N LE 3 NEBV Connecting cables for valves Connection technology on left, field device side B2 Socket type B to industry standard,
KEL 183 Cable entry frames
KEL 183 Cable entry frames Description Type Order.No. Inserts KT PU KT 183 KT large The new version of the split cable entry frame KEL 183 enables the user to route cables and tubes with a diameter up
2179-CD Series Fiber Optic Splice Closure. Installation Instructions
2179-CD Series Fiber Optic Splice Closure Installation Instructions 1.0 Product Introduction The new 3M TM 2179-CD Series Fiber Optic Splice Closure can be used in buried, underground, aerial, and pedestal
0.3 mm Pitch, 1.5 mm Mated Height, Board- to-fine Coaxial Cable Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Spiral Dπ - Light Type
INTERNAL ELECTRICAL INSTALLATION PRODUCTS Flexible conduits Spiral Dπ - Light Type ñ Corrugated (spiral), pliable ñ Suitable for light mechanical loads ñ Produced from polyvinyl chloride - (U-PVC) ñ Self
HARTING Ethernet cabling cables and connectors, 4 wire
Industrial Cat. 5e Standard cable, 4-wire Type A for permanent installation or to build-up PROFINET system cables PVC X 8 wire X Cat. 5e X Cat. 6 Cat. 6 A Cat. 7 Cable structure Core structure Wire insulation
KEL 24 Cable entry frames
24 Cable entry frames Split inserts Description Type Order No. Inserts KT PU small large The 24 matches exactly the cut-out dimensions of 24-pole standard industrial connectors. 24 42241 - The split insert
Connecting cables for valves, socket type A, EN Type codes Connecting cable with PUR cable sheath
Type codes Connecting cable with PUR cable sheath NEBV A1 W 3 F P K 0.6 N LE 3 Function NEBV Connecting cables for valves Connection technology on left, field device side A1 Plug socket type A, EN 175301-803
Single Point Flow Monitor SW118 SW119
SW8 SW9 SW8 SW9 Single point flow monitors with MIN/MAX monitoring function, suitable for water, oil, air and media with similar thermal conductivities (selectable by means of a medium switch). With either
IndyGo Facility Upgrades Project 35671EE
SECTION 260553 IDENTIFICATION FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Identification for raceways. 2. Identification of power and control cables. 3. Identification for
Electrical Cable Ties
3M Cable Ties Miniature Standard Standard Standard Mounting Double Loop Intermediate Heavy- Duty Heavy- Duty Mounting Heavy- Duty Double Loop Designed to meet a wide range of temperatures from -40 F (-40
Marking systems for the entire cabinet MultiMark is the smart all-in-one solution Let s connect. MultiMark marking system
Marking systems for the entire cabinet MultiMark is the smart all-in-one solution Let s connect. MultiMark marking system MultiMark Up-to-date marking tailored to your needs Identification with MultiMark
3M Fiber Optic Splice Tray 2527 with 3M PLC Optical Splitter
3M Fiber Optic Splice Tray 2527 with 3M PLC Optical Splitter Instructions January 2010 3 1.0 General 1.1 The 3M Fiber Optic Splice Tray 2527 with 3M PLC Optical Splitter(s) protects, organizes and stores
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 26 0553 - IDENTIFICATION FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
TEK-LCD 7801A. NEMA 4X Loop-Powered Feet and Inches Level Meter. ACCESSORIES. Technology Solutions
Technology Solutions TEK-LCD 7801A NEMA 4X Loop-Powered Feet and Inches Level Meter ACCESSORIES www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The
ADVANCED CABLE TIES, INC.
ADVANCED CABLE TIES, INC. Advanced Engineering + Advanced Processing = Advanced Cable s, U, CSA, Approved, OHS Compliant Products ISO 9001:2015 egistered Quality System sonal Customer Service epresentative
SQM40/41 Actuators for air and gas dampers
SQM40/41 Actuators for air and gas dampers Description SQM40/41 actuators are used for the positioning of flow control valves, butterfly valves, dampers or any application requiring rotary motion. The
Product group 1. Product description. At a glance. Cable entry systems for entering pre-terminated cables
Product group 1 Cable entry systems for entering pre-terminated cables At a glance The patented cable entry system enables the user to enter, seal and provide strain relief for pre-terminated and standard
Product Data Sheet 4656 ZW
The engineer's choice 4656 ZW INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
CONTACT-DUO-PROFILE. Contact-Duo-Profile overview
13 6.3 13 6.3 4.7 20.7 24.6 +1/-0 24.6 +1/-0 2.5 24.6 +1/-0 20.7 4.3 +0.3-0.4 3.6 ±0.3 32.5 32.5 32.5 5 2 CONTACT-DUO-PROFILE Contact-Duo-Profile overview 13 6.3 13 6.3 4.7 2.5 16±0.8 4.7 2.5 4.7 2.5 2.6
8 Installation Equipment
8 Installation Equipment Plugs and Sockets SolConeX Series 7570, 7571 CES Series 7575, 7579, 7581 10342E00 The plugs and sockets in the CES system comply with IEC/EN 60 309-1/ -2 (CEE). The small 16 A
LC3D115M7 TeSys D - star delta starter - 3 x 3P (3 NO) A V AC coil
Characteristics TeSys D - star delta starter - 3 x 3P (3 NO) - 115 A - 220 V AC coil Main Range Product name Product or component type Device short name Contactor application Utilisation category Device
Compact Module. Category 6 FTP Cabling System
Compact Module Shielded design for improved EMI performance Suitable for Gigabit Ethernet applications and beyond Ultra-slimline design Colour coded for quick and accurate termination Interchangeable with
Product Data Sheet 8506 VW-691
The engineer's choice 8506 VW-691 INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
FLEXIMARK CATALOGUE MARKING SYSTEMS 2007
FLEXIMARK CATALOGUE MARKING SYSTEMS 2007 A Lapp Group Company WELCOME TO FLEXIMARK - A COMPANY WITH A COMPREHENSIVE VIEW Do you need marking, large or small, indoor or outdoor environment? Let us together
Electrical Markets 3M ScotchCode Wire Marking and Identification System. Quality. Marking. For Most Projects
Electrical Markets 3M ScotchCode Wire Marking and Identification System Quality Marking For Most Projects Dispensers 3M ScotchCode Dispenser STD-TAG The proprietary 3M ScotchCode Dispenser STD-TAG simplifies
Cold Shrink Straight Joint
Cold Shrink Straight Joint 3M QS2000E 22 kv Single Core Straight Joint Instruction Sheet All dimensions shown are in mm unless otherwise stated Kits contains components for one single core cable -2-2*
DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections
Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing Description The electronic pressure switch is the successful combination of hygienic process connections with flush welded
APPLIANCES /// MTA, CST-100 II AND SL-156 CONNECTORS. CONNECTORS/ APPLIANCES MTA, CST-100 II and SL-156 Connectors
PPLINCES /// MT, CST-100 II ND SL-156 CONNECTORS CONNECTORS/ PPLINCES MT, CST-100 II and SL-156 Connectors Contents Introduction This catalog has been designed to assist you, our customer, identify products
Product Data Sheet 4656 EZ
The engineer's choice 4656 EZ INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
Flygt Submersible Motor Cables
Flygt Submersible Motor Cables This brochure contains an overview of the Flygt motor cable assortment. The cables are especially designed for submersible use and made of carefully selected materials. The
Product Data Sheet 4650 N-465
The engineer's choice 4650 N-465 INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 ELECTRICAL FEATURES... 5 3.3 AERODYNAMIC...
3M Cold Shrink Splice Kit QS-III 5416A
3M Cold Shrink Splice Kit QS-III 5416A for Jacketed Concentric Neutral (JCN) and Concentric Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL CAUTION Working around energized systems may
CANNON STANDARD page 1 of 18. Cm5 MOTOR CONNECTOR
CANNON STANDARD page 1 of 18 1 General Information... 2 1.1 Scope... 2 2 Ordering Code... 3 2.1 Housing / Motor Side... 3 2.2 Cable Side... 3 3 Explosion Drawing... 3.1 Explosion Complete Assembly... 3.2
HighBand 25. TrueNet Category 6 Solutions
HighBand 25 TrueNet Category 6 Solutions The highest performing cross-connect system in the world. A unique high-density solution with superior cable management. ADC KRONE s HighBand 25 cross connect solution
Bharat Heavy Electricals Limited HIGH PRESSURE BOILER PLANT, TIRUCHIRAPPALLI CONTROLS AND INSTRUMENTATION/FB
Bharat Heavy Electricals Limited HIGH PRESSURE BOILER PLANT, TIRUCHIRAPPALLI 620 014. CONTROLS AND INSTRUMENTATION/FB DATA SHEET FOR MULTICORE, ARMOURED, CONTROL CABLE Project: Ennore Sez, 2 x 660 MW,
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL CAUTION Working around energized
Connecting cables NEBS, for sensors
Connecting cables NEBS, for sensors Connecting cables NEBS, for sensors Product range overview Function Version Type code Connection technology (Electrical connection 2) Connecting cable Cable characteristic
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-500-1000 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL F CAUTION Working around
Feed-through terminal, 4 mm², Screw connection, Wemid, dark beige, TS 35
General ordering data Order No. 1020100000 Part designation WDU 4 Version EAN 4008190150617 Qty. 100 pc(s). Feed-through terminal,, Screw connection, Wemid, dark beige, TS Product notes Note, ordering
Photoelectrics Through-beam Type PA18C.T..., DC
Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:
Description Set value in neutral conductor is synchronous with set value Ir of main pole. R.m.s. value measurement and thermal memory CSA 100
DATASHEET - NZMN3-4-AE400 Circuit-breaker, 4p, 400A Part no. NZMN3-4-AE400 Catalog No. 265891 Similar to illustration EL-Nummer (Norway) 0004358857 Delivery program Product range Circuit-breaker Protective
3M Motor Lead Inline Splice 5331, 5332, 5333 & 5334
3M Motor Lead Inline Splice 5331, 5332, 5333 & 5334 for 5/8 kv Non-Shielded and Shielded Cables (Ribbon, Wire and UniShield Cables) Instructions Cable Size Range: Feeder: #8 AWG 500 kcmil Motor Lead: #10
Product information 19" 1U HD Patch Panel 48xRJ45/s, Cat. 6A, gray, fully populated
Product information 19" 1U HD Patch Panel 48xRJ45/s, Cat. 6A, gray, fully populated R512417 966740615 1 Pcs. 090.6102 Metal patch panel with integrated cable tie shelf. 19" 1U HD patch panel 4 12-port/s
Assembly Instructions
Assembly Instructions REP Series Environmentally - Sealed Rectangular Plastic Connectors Hypertac S.A. January 2014 Assembly Instructions REP Series January 2014 1 Table of Contents I. Introduction A.
INSTRUCTION AND MAINTENANCE VIDEO MOTORE PROJECTION SCREEN
INSTRUCTION AND MAINTENANCE VIDEO MOTORE PROJECTION SCREEN 1.1 TECHNICAL DATA PRODUCT DESCRIPTION Screens made with the following projection fabrics: SOFT WHITE, MATT WHITE SOFT, SOFT WHITE TRANSOUND,
-V- New. Connecting cables for valves, socket type A, EN Type codes Connecting cable with PUR cable sheath NEBV A1 W 3 F P K 0.
Type codes Connecting cable with PUR cable sheath NEBV A1 W 3 F P K 0.6 N LE 3 Function NEBV Connecting cables for valves Connection technology on left, field device side A1 Plug socket type A, EN 175301-803
Quick Term II. Cold Shrink Silicone Rubber Termination (With High-K Stress Relief) Instruction Sheet. Quick Term II. Silicone Rubber Termination Kits
Quick Term II Cold Shrink Silicone Rubber Termination (With High-K Stress Relief) Instruction Sheet IEEE Std. No. 48 1990 Class 1 Termination 15 kv Class 110 kv BIL Kit Contents: 3 Hi K Silicone Rubber
3M Cold Shrink QS4 Integrated Splice Kit QS4-35TS
3M Cold Shrink QS4 Integrated Splice Kit QS4-35TS-350-1000 for Tape Shield, Wire Shield, UniShield, and Longitudinally Corrugated (LC) Cable Instructions IEEE Std. 404 35 kv Class 250 kv BIL F CAUTION
3M Cold Shrink QS-III Splice Kit 5467A(S)-WF
3M Cold Shrink QS-III Splice Kit 5467A(S)-WF for Jacketed Concentric Neutral (JCN) Cable Instructions IEEE Std. 404 35 kv Class 250 kv BIL F CAUTION Working around energized systems may cause serious injury
Flexible Cord. Inside this section
2 Strain Relief Cord Connectors provide a liquid tight and strain relief termination for flexible type neoprene, vinyl, or PVC control cord and cable, and are now offered in steel, aluminum, and nylon.
VIP-3/SC/FLK40. Extract from the online catalog. Order No.:
Extract from the online catalog VIP-3/SC/FLK40 Order No.: 2315078 VARIOFACE module, with screw connection and flat-ribbon cable plug connector, for mounting on NS 32 or NS 35/7.5, with pin strip and short
Connecting cables for valves, round plug connectors Product range overview
Connecting cables for valves, round plug connectors Product range overview Version Type code Connection technology (Electrical connection 2) Electrical connection 1: socket M8x1 4-pin NEBV-M8W4L Plug M8x1,
DIAS power supply and DIC 221 fibre optic cable coupling module
POWER SUPPLY AND FIBRE OPTIC COUPLING MODULE DIC 221 DIAS power supply and DIC 221 fibre optic cable coupling module for the power supply of DIAS function modules, 2 x fibre optic cable connections (DIAS
XS_-EU. M8 and M12 Sensor Connectors. Ordering Information
M8 and M Sensor Connectors XS_-EU For a wide range of applications the XS_-EU family of M8 and M sensor connectors provides the high performance and features making the family the ideal choice for standard
LC3D180AV7 TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A V AC coil
Characteristics TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A - 400 V AC coil Main Range Product name Product or component type Device short name Contactor application Utilisation category Device
Power Circuit of a UL508A Panel. Typical UL489 Application
Typical UL489 Application Power Circuit of a UL508A Panel Disclaimer: This is an application example. Installation should be done by a qualified electrician under the guidance of UL specifications.. Altech
Connecting cables for valves, Sub-D Type codes
Type codes NEBV C S1 G 44 K Function NEBV Connecting cables for valves Product design Standard C Easy to clean design Connection technology, left, field device side S1 S7 Sub-D socket Sub-D HD socket Cable
SECTION COMMUNICATIONS HORIZONTAL CABLING
SECTION 271500 COMMUNICATIONS HORIZONTAL CABLING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. UTP cabling. 2. Telecommunications outlet/connectors including patch panels. 3. Cabling identification
Power and Cable Management Products Doorbells Digital Tester
Products Doorbells Digital Tester 13 Amp railing Sockets 13 Amp 1 ang Extension eads 13 Amp 2 ang Extension eads 13 Amp 4 ang Extension eads 13 Amp 6 & ang Extension eads 13 Amp 3 ang Switched Extension
Feed-through terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35
General ordering data Order No. 1020000000 Part designation WDU 2.5 Version EAN 4008190099633 Qty. 100 pc(s). Feed-through terminal,, Screw connection, Wemid, dark beige, Product notes Note, ordering data
EXPlora. Introduction
Introduction EXPlora The EXPlora range is most suited to manufacturers of ancillary electrical equipment such as motors, pumps, lighting equipment, process and control gear for use in factories and plant
Soft starter, 66 A, V AC, Us= 24 V DC, with control unit, Frame size N. Function Soft starter for three-phase loads, with control unit
DATASHEET - S811+N66N3S Delivery program Soft starter, 66 A, 200-600 V AC, Us= 24 V DC, with control unit, Frame size N Part no. S811+N66N3S Catalog No. 168978 Eaton Catalog No. S811PLUSN66N3S EL-Nummer
architecture mounting Features Product lighting
Intema High Fidelity Ambient Lighting Module Product Data Sheet The Intema ambient lighting module is a simple plug and play solution that enables highly uniform glare free lighting. The unique 240 degree
DATA SHEET. The Advantys model STBDAI5260 Digital Input Module provides 2 isolated discrete input points that operate on a 115 VAC power source.
Advantys STB Advantys STB Input Module DATA SHEET Description The Advantys model STBDAI5260 Digital Input Module provides 2 isolated discrete input points that operate on a 115 VAC power source. Features
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Up to 6GHz Transmission Speed Mated Height Comparison (With E.FL series) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
TeSys contactors. Model d. Type of contactor LC1- LC1- LC1- LC1- LC1-D115 & D09 D18 D25 D38 D40 D50 D95 LC1-D150 DT20 & DT25 DT32 & DT40
Characteristics Type of contactor LC- LC- LC- LC- LC-D & D09 D8 D2 D38 D40 D0 D9 LC-D0 DT20 & DT2 DT32 & DT40 Environment Rated insulation voltage (Ui) Conforming to IEC 947-4-, overvoltage category III,
User guide. Preamble. unpacking
User guide Preamble This notice includes all the advice and warnings that enables a correct set up and a safe use of the product. TPL Vision can not be responsible for the bad use of the notice. If so,
Photo: HELUKABEL â. Special cables
Photo: HELUKABEL Special cables Special cables The name HELUKABEL stands for standard cables and lines, cables for data technology, pre-assembled cables, cable accessories and also special cables such
DS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection
with Flush Process Connection piezoresistive pressure sensor up to independent contacts, configurable optional: analogue output Exprotection (for wire) cooling element up to 00 C nominal pressure ranges
System 500. Non-fire-rated, mineral insulated copper sheathed wiring cable
Non-fire-rated, mineral insulated copper sheathed wiring cable For retrofitting feeders in buildings and for ease of installation in tight spaces and difficult runs Cable construction Solid copper conductors
Wire Connectors FAX WIRE CONNECTORS. Quick, reliable splices are a snap and a squeeze
Wire s Spring s and Tools 32 Crimp Sleeve s 37 Insulation Displacement s and Tools 38 Scotchlok s and Tools 42 Moisture Guard 46 3M Scotchlok 557 IDC WIRE CONNECTORS we design connectors that are as comfortable
I r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100
DATASHEET - NZMH2-A100 Circuit-breaker, 3p, 100A Part no. NZMH2-A100 Catalog No. 259099 Similar to illustration Delivery program Product range Circuit-breaker Protective function System and cable protection
12 Prefabricated cables
Description. Description SEW EURODRIVE offers pre-fabricated cables with plugs for straightforward and reliable motor connection. Cable and contact are connected using the crimp technique. Cables are available
KVT Split cable glands
KVT Split cable glands Description Type Order Inserts KT Thread PU No. small large Thread length KVT is a circular split frame for quick and easy installation of cables or complete cable harnesses. Polyamide
Catalogue. Rollers for belt conveyors
Catalogue Rollers for belt conveyors This catalogue contains a selection of the most commonly used standard rollers designed for bulk materials handling. Other sizes of rollers are available upon request.
0.6mm Pitch Stacking Height 3mm to 16mm Connector
0.6mm Pitch Stacking Height 3mm to 16mm Connector FX8, FX8C Series FX8 Series FX8C Series Note that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height 3mm to 16mm available
Installation Guide VL-MV10. Model No.
Installation Guide Model Name Model No. Main Monitor Station VL-MV0 R Main monitor station is described as "main monitor" in this guide. R In this guide, the suffix of each model number (e.g., the "EX"
Pre-terminated cabling system Modular cassette technology with 6x RJ45 C6 A ports
RJ45 - Cat. 6A Pre-terminated cabling system Modular cassette technology with 6x RJ45 C6 A ports Compatible with FO trunks Modern data centre trunk solution in modular cassette technology Pre-terminated
SITRANS F flowmeters SITRANS F M. Transmitter MAG 6000 I/6000 I Ex d e 4/43
Overview The MAG 6000 I/I Ex d transmitter is designed for the demands in the process industry. The robust die cast aluminium housing provides superb protection, even in the most harsh industrial environments.
Bright and Various Illumination makes easy planning of multiple design. Easy Matrix Mounting available. Dome Cover type (easy to look) provided.
LED Indicator LED BL Bright and Various Illumination makes easy planning of multiple design. Easy Matrix Mounting available. Dome Cover type (easy to look) provided. Various illumination (Mono Color,Split-Face,
10G 6A UTP SYSTEM PRODUCTS 10G 6A UTP
0G A is Siemon s advanced, end-to-end augmented category UTP structured cabling system, designed to meet or exceed all 0GBASE-T performance requirements, including alien crosstalk. Siemon s full channel
SECTION 4 TABLE OF CONTENTS
Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for
2.1 Kit Contents 2.2 Elements needed from the FIST installation kit 2.3 Tools 2.4 Cable preparation table
FIST-GCO2-F INSTALLATION INSTRUCTION GCO2-FC GCO2-FD Content 1 Introduction 2 General 2.1 Kit Contents 2.2 Elements needed from the FIST installation kit 2.3 Tools 2.4 Cable preparation table 3 Installation
3M Cold Shrink Splice Kit QS-III 5514A
3M Cold Shrink Splice Kit QS-III 5514A for UniShield, Wire Shielded, Longitudinally Corrugated (LC), and Tape Shielded (Ribbon Shielded) Cable or Transitions to Concentric Neutral (CN)/Jacketed Concentric
Busbar Systems. Altech UL489. UL489 Listed Busbars. Universal UL489 Busbar fits most UL489 Miniature Circuit Breakers in the market!
Busbar Systems UL489 Listed Busbars The Altech Busbar System is an innovative way to jumper up to 57 poles of Miniature Circuit Breakers (MCB). The advantages of this busbar system are: 30% Installation
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that
Optical Signal Devices. Free-standing Beacons
Free-standing Beacons Overview Free-standing Permanent Beacons Flashing Beacons 200/203 201/204 (LED) 209 209 (LED) 210/213 211/214 (LED) 219 219 (LED) 202 Flashing 205 Flashing 209 Flashing Beacon 212
ENC - LKE51 - L I B
ENC-LKE51 Linear Magnetic Encoder FEATURES DESCRIPTION LKE51 ORDERING INFORMATION Resolutions: 5, 10, 25, and 50μm Linear Travel Speed: Up to 16m/s Standard Sensor for Linear and Rotary Axis Gap Clearance
LC1D09F7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A V AC coil
Product data sheet Characteristics LC1D09F7 TeSys D contactor - 3P(3 NO) - AC-3 -
Follow The Leader In Shielded Technology
1970s Vampire Tap 1990s Shielded Modular Jack 190s 4 Position Data Connector Follow The Leader In Shielded Technology The new AMP-TWIST Jack is our latest shielded product evolution. It can be terminated
Scotch Heavy Duty Vinyl Electrical Tape 22
Scotch Heavy Duty Vinyl Electrical Tape 22 Data Sheet July 2015 Description Agency Approvals & Self Certifications Scotch Heavy Duty Vinyl Electrical Tape 22 is a premium grade, 10-mil thick, vinyl insulating
Protective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A
DATASHEET - NZMN3-VE630 Circuit-breaker, 3p, 630A Part no. NZMN3-VE630 Catalog No. 259133 EL-Nummer (Norway) 0004358791 Similar to illustration Delivery program Product range Circuit-breaker Protective
FOSC 450 C6 and D6 Closures
FOSC 450 C6 and D6 Closures I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closure 1. General Product Information The FOSC 450 C6 and D6 fiber optic splice closures use compressed gel
FOSC 400. Ordering Guide For Closures and Accessories. Section I 3. Section II 5. Section III 9. Section IV 11. Section V 15
FOSC 400 Ordering Guide For Closures and Accessories Section I 3 How to Order FOSC 400 Closures Section II 5 How to Order Accessories for FOSC 400 Closures Section III 9 Other FOSC Fiber Optic Splice Closures
llen-bradley 194R-HM4-NFPA3
Technical Data Rotary Disconnect Switch Specifications Bulletin Number 194R Topic Page Product Line Overview 2 General Specifications Fuse Description 12 Approximate Dimensions 14 Additional Resources
Amphenol. Amphenol-Tuchel Electronics GmbH. C 112 Series M12 - Connectors
Amphenol Amphenol-Tuchel Electronics GmbH C 112 Series M12 - Connectors We connect con The company Amphenol-Tuchel Electronics is a worldwide leader in electrical connectors and contacting devices. Our