OPERATION MANUAL USF-106DC-12G USF-10DC-AHDR. 4K Up/Down-Converter. 4K Down-Converter. 2 nd Edition - Rev. 1

Size: px
Start display at page:

Download "OPERATION MANUAL USF-106DC-12G USF-10DC-AHDR. 4K Up/Down-Converter. 4K Down-Converter. 2 nd Edition - Rev. 1"

Transcription

1 OPERATION MANUAL USF-106UDC-12G 4K Up/Down-Converter USF-106DC-12G 4K Down-Converter USF-10UDC-AHDR USF-10DC-AHDR 2 nd Edition - Rev. 1

2 Precautions Important Safety Warnings [Power] Stop [Circuitry Access] Do not place or drop heavy or sharp-edged objects on the power cord. A damaged cord can cause fire or electrical shock hazards. Regularly check the power cord for excessive wear or damage to avoid possible fire / electrical hazards. Stop Do not touch any parts / circuitry with a high heat factor. Capacitors can retain enough electric charge to cause mild to serious shock, even after the power has been disconnected. Capacitors associated with the power supply are especially hazardous. Hazard [Potential Hazards] Unit should not be operated or stored with cover, panels, and / or casing removed. Operating the unit with circuitry exposed could result in electric shock / fire hazards or a unit malfunction. Caution If abnormal odors or noises are noticed coming from the unit, immediately turn the power off and disconnect the power cord to avoid potentially hazardous conditions. If problems similar to the above occur, contact an authorized service representative before attempting to operate the unit again. [Consumables] Caution Consumable items that are used in the unit must be periodically replaced. For further details on which parts are consumables and when they should be replaced, refer to the specifications at the end of the Operation Manual. Since the service life of the consumables varies greatly depending on the environment in which they are used, such items should be replaced at an early date. For details on replacing consumable items, contact your dealer. 2

3 Upon Receipt USF-106UDC / DC-12G cards and their accessories are fully inspected and adjusted prior to shipment. Check your received items against the packing lists below. Check to ensure no damage has occurred during shipment. If damage has occurred, or items are missing, inform your supplier immediately. USF-106UDC / DC-12G Box ITEM QTY REMARKS USF-106UDC-12G or USF-106DC-12G DVD-ROM 1 1 Front module Rear module Installation disc -USF-106UDC/DC-12G GUI Software -USF-GUI-Launcher (Connection Manager) Including the following PDF manuals -USF-106UDC/DC-12G Operation Manual -USF-GUI-Launcher Operation Manual Software Option USF-10UDC-AHDR or USF-10DC-AHDR 1 HDR Expansion option Remote Control Option FA-10RU 1 Trademarks * Microsoft, Windows and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries * Intel Core and Pentium are trademarks of Intel Corporation in the U.S. and/or other countries. * Firefox is a registered trademark of the Mozilla Foundation. * Dolby is a trademark of Dolby Laboratories Inc. * All other trademarks are trademarks or registered trademarks of their respective owners. 3

4 Table of Contents 1. Prior to Starting Overview Features Panel Descriptions Front Panel Dipswitch Settings Rear Panel Connection Basic Configuration Video Input and Output Conversion Table USF-106UDC-12G USF-106DC-12G USF-106UDC/DC-12G GUI (Windows GUI) Video Tab Input Select Reference Select Synchronizer Converter Color Processor Input Select Color Processor Pre Process Amp/Post Process Amp Input / Output Gamma / Color Dynamic Range Gain Differential Color Correct Knee (RGB) Clip Balance Color Correct YPbPr Clip Other Ancillary Output Select Video Status Audio Tab Input Input Delay Sampling Rate Converter Output Mapping Monosum / Downmix / Test Signal Gain Converter Delay Output Audio System Input Status / Output Status Event Tab Unsaved Menu Settings Status Tab Web GUI Module Information Network Trap SNMP Trap Settings

5 Download MIB File Event Data Gamma Data / Gamut Data Command Control Overview Communication Method Slave IP Address Setting Master IP Address Setting Setting Command Master to Slave Messages Command List - Master to Slave Commands Setting Value Slave Responses to Master to Slave Messages Slave Status Report Messages Checking the Slave Start-up Acquiring the Slave Status Changing the Slave Settings Reporting the Slave Status Change SNMP Functions USF-106UDC-12G MIB Information USF-106DC-12G MIB Information Specifications and Dimensions Unit Specifications External Dimensions

6 1. Prior to Starting 1-1. Overview The USF-106UDC/DC-12G module is an up/down converter with FS functions supporting 12G-SDI. Strongly supports various video conversions with a newly developed color processing circuit that supports latest Gamut and Dynamic Range. Audio remapping, audio gain adjustment and audio delay functions are also available Features Implements a latest SDI interface: 12G-SDI. Strongly supports HD/4K contents production with a newly developed color processing circuit. ITU-R BT.2020 (WCG) and ITU-R BT.709 processing and conversion. Various HDR/ SDR EOTF and OETF reduce differences with external devices. Custom EOTF / OETF log curves and color space data upload from computer Dynamic Range conversion for Display light, OOTF (HLG) Up-/down-/IP-conversions, ranging from SD to HD/4K 3G-SDI Level-A/B and SQD / 2SI conversions 4K conversion between Single-Link 12G-SDI and Quad-Link 3G-SDI (Gearbox) Robust frame synchronizer with audio and SDI error correction GUI software (full) and web browser (limited) control and SNMP monitoring Mounts on USF-212AS and USF-105AS frames 6

7 2. Panel Descriptions 2-1. Front Panel USF-106UDC-12G 1 2 USF-106UDC-12G No. Name Description 1 POWER SW (S2) 2 Micro SD Switch used to turn unit power ON / OFF. Move the switch to the right to turn on the power. To remove the front module when the frame is powered on, pull out the module with the switch turned to the left. To install the front module when the frame is powered on, insert the module with the switch off (move to left) and turn on (move to right) the power switch after installation. (POWER SW not installed on the front module S/N and later.) A micro SD card is implemented on the module. Do not remove the micro SD card Dipswitch Settings IMPORTANT Note that dipswitch settings should remain unchanged from factory default settings. If you have accidentally changed the setting, refer to the table below to return to the factory default settings. Dipswitch. Switch No. Setting Remark DS DS2 1-8 DS7 1-8 Off (Do not change) On (Do not change) Off (Do not change) Off (Do not change) Off (Do not change) (Not installed on the front module S/N and later.) (Not installed on the front module S/N and later.) 7

8 2-3. Rear Panel No. Name Description 1 12G/3G/HD/SD-SDI IN Used for 12G/3G/HD/SD-SDI input G/3G/HD/SD-SDI OUT 1a 12G/3G/HD/SD-SDI OUT 1b 3G/HD/SD-SDI IO 2a 3G/HD/SD-SDI IO 2b 3G/HD/SD-SDI IO 2c 3G/HD/SD-SDI IO 2d Used for 12G/3G/HD/SD-SDI output Used for 12G/3G/HD/SD-SDI output Used for 3G/HD/SD-SDI input/output and Link 1 for 4K Quad Link 3G-SDI. Used for 3G/HD/SD-SDI input/output and Link 2 for 4K Quad Link 3G-SDI. Used for 3G/HD/SD-SDI input/output and Link 3 for 4K Quad Link 3G-SDI. Used for 3G/HD/SD-SDI input/output and Link 4 for 4K Quad Link 3G-SDI. 8

9 VIDEO IN USF-10 40VEA THRU 1 2 3G/HD/SDSDI IN USF-1043FS USF-1 08ADA SDI IN USF-10 53DDA ANALOG AUDIO 1 2 VIDEO OUT 1 2 3G/HD/SD SDI OUT SDI OUT IN OUT 3G/HD/SD SDI USF-1013MUX IN OUT 3G/HD/SD SDI USF-101 3DEMUX USF-10 43DCC 1/2 3/4 5/6 DIGITAL AUDIO IN 1/2 3/4 5/6 DIGITAL AUDIO OUT VIDEO OUT 1 VIDEO IN USF-11 00VEA THRU LAN A ALARM GENLOCK 1 GENLOCK 2 AC V 50/60Hz IN 3. Connection 3-1. Basic Configuration Two USF-106UDC-12G (or USF-106DC-12G) module cards are installed on a USF-212AS frame in this example. Set input or output for four BNC port on the upper side of the modules. See Sec.3-2. Video Input and Output for details. The USF frame, the PC and the FA-10RU (optional remote control unit) are connected via LAN. Install the dedicated Windows GUI software in the PC and setup and operate the modules. (See Sec.5. USF-106UDC/DC-12G GUI (Windows GUI) for details. The PC Web browser allows you to save/load events (menu settings list) and to import/export Gamma and Gamut settings files. ( See Sec. 6. Web GUI. ) Reference Signal 75Ω Termination USF-106UDC-12G 1 2 3G/HD/SD SDI IN 1 2 3G/HD/SD SDI OUT 7/8 -LTC 7/8 -LTC LAN 1 LAN 2 LAN1 USF ( ) SER. NO. AC V 50/60Hz IN 1 AC V 50/60Hz IN 2 USF-212AS Rear Panel Selectable Inputs/outputs 4K/HD/SD Video 4K/HD/SD Video Ethernet hub Setup and operation Save/load events Setup and operation (Windows GUI Software) Save/load events (Web browser) LAN port ( ) FA-10RU (Remote Control Unit option) Windows GUI Software Web browser TO MU GPI1 GPI2 GPI3 (10/100/1000BASE-T) TO MU ( ) FA-10RU allows you to setup/operate the modules and save/load events. See the FA-10RU for USF-106UDC/DC-12G Operation Manual for details on FA-10RU connection and operation. 9

10 3-2. Video Input and Output If using SDI I/O 2a-2d as input (*1) (Signals in light blue cells are unavailable on USF-106DC-12G modules.) Input video Input port (*2) SDI OUT 1a, 1b [Video > Converter] menu settings output video HD 4K (3G Quad) 4K (12G Single) SDI IN (SDI 1) SDI I/O 2a SDI I/O 2a-2d SDI IN (SDI 1) HD x 2 4K (12G Single) x 2 HD x 2 4K (12G Single) x 2 HD x 2 4K (12G Single) x 2 Format Convert: Follow Input Format Convert: Manual Standard: 2160 Frame Rate: 59.94P Level: Level-A Division: 2-Sample Interleave Format Convert: Manual Standard: 1080 Frame Rate: 59.94i/29.97PsF Format Convert: Manual Standard: 2160 Frame Rate: 59.94P Level: Level-A Division: 2-Sample Interleave Format Convert: Manual Standard: 1080 Frame Rate: 59.94i/29.97PsF Format Convert: Follow Input (*1) Select Input under [Video > Input Select > SDI 2 Terminal]. (p 16) (*2) Select an input source under the [Video > Input Select > Source Select]. (p 16) Input: SDI IN Output: SDI OUT 1a, 1b 4K or HD 4K or HD 4K or HD Input: SDI I/O 2a-2d Output: SDI OUT 1a, 1b 4K (3G Quad) x1 or HD x 1 (2a) 4K or HD 4K or HD 10

11 If using SDI I/O 2a-2d as output (*3) (Signals in light blue cells are unavailable on USF-106DC-12G modules.) Input video Input port SDI OUT 1a, 1b output video SDI I/O 2a-2d output video [Video > Converter] menu settings HD 4K (12G Single) SDI IN (SDI 1) HD x 2 HD x 4 Format Convert: Follow Input 4K (12G Single) x 2 (*4) 4K (3G Quad) x 1 HD x 2 HD x 4 4K (12G Single) x 2 (*4) 4K (3G Quad) x 1 Format Convert: Manual Standard: 2160 Frame Rate: 59.94P Level: Level-A or B Division: 2-Sample Interleave or Square Format Convert: Manual Standard: 1080 Frame Rate: 59.94i/29.97PsF Format Convert: Follow Input or Manual Standard: 2160 Frame Rate: 59.94P Level: Level-A or B Division: 2-Sample Interleave or Square (*3) Select Output under [Video > Input Select > SDI 2 Terminal]. (p 16) (*4) Selecting Level-B or Square displays the black video. Input: SDI IN Output: SDI OUT 1a, 1b SDI I/O 2a-2d 4K (3G Quad) x1 or HD x 4 4K or HD 4K or HD 4K or HD 11

12 4. Conversion Table 4-1. USF-106UDC-12G <59.94 Hz> Output 4K HD SD 12G 3G x 4 3G 1.5G Input 2160/59.94p Level-A 2SI 12G 2160/59.94p Level-A 2SI 2160/59.94p Level-A SQD 4K 3G 2160/59.94p Level-A 2SI x /59.94p Level-B SQD 2160/59.94p Level-B 2SI 3G 1080/59.94p Level-A 1080/59.94p Level-B 1080/29.97p HD 1080/23.98p 1.5G 1080/59.94i (29.97PsF) 1080/23.98PsF 720/59.94p SD 525/59.94i (SD-SDI) 2160/59.94p Level-A SQD 2160/59.94p Level-A 2SI 2160/59.94p Level-B SQD 2160/59.94p Level-B 2SI 1080/59.94p Level-A 1080/59.94p Level-B 1080/29.97p 1080/23.98p 1080/59.94i (29.97PsF) 1080/23.98PsF 720/59.94p 525/59.94i(SD-SDI) <50 Hz> Output 4K HD SD 12G 3G x 4 3G 1.5G Input 12G 2160/50p Level-A 2SI 2160/50p Level-A SQD 4K 3G 2160/50p Level-A 2SI x /50p Level-B SQD 2160/50p Level-B 2SI 3G 1080/50p Level-A 1080/50p Level-B HD 1080/25p 1.5G 1080/50i (25PsF) 720/50p SD 625/50i (SD-SDI) 2160/50p Level-A 2SI 2160/50p Level-A SQD 2160/50p Level-A 2SI 2160/50p Level-B SQD 2160/50p Level-B 2SI 1080/50p Level-A 1080/50p Level-B 1080/25p 1080/50i (25PsF) 720/50p 625/50i (SD-SDI) 12

13 4-1. USF-106DC-12G <59.94 Hz> Output 4K HD SD 12G 3G x 4 3G 1.5G Input 2160/59.94p Level-A 2SI 12G 2160/59.94p Level-A 2SI 2160/59.94p Level-A SQD 4K 3G 2160/59.94p Level-A 2SI x /59.94p Level-B SQD 2160/59.94p Level-B 2SI 3G 1080/59.94p Level-A 1080/59.94p Level-B 1080/29.97p HD 1080/23.98p 1.5G 1080/59.94i (29.97PsF) 1080/23.98PsF 720/59.94p SD 525/59.94i (SD-SDI) 2160/59.94p Level-A SQD 2160/59.94p Level-A 2SI 2160/59.94p Level-B SQD 2160/59.94p Level-B 2SI 1080/59.94p Level-A 1080/59.94p Level-B 1080/29.97p 1080/23.98p 1080/59.94i (29.97PsF) 1080/23.98PsF 720/59.94p 525/59.94i(SD-SDI) <50 Hz> Output 4K HD SD 12G 3G x 4 3G 1.5G Input 12G 2160/50p Level-A 2SI 2160/50p Level-A SQD 4K 3G 2160/50p Level-A 2SI x /50p Level-B SQD 2160/50p Level-B 2SI 3G 1080/50p Level-A 1080/50p Level-B HD 1080/25p 1.5G 1080/50i (25PsF) 720/50p SD 625/50i (SD-SDI) 2160/50p Level-A 2SI 2160/50p Level-A SQD 2160/50p Level-A 2SI 2160/50p Level-B SQD 2160/50p Level-B 2SI 1080/50p Level-A 1080/50p Level-B 1080/25p 1080/50i (25PsF) 720/50p 625/50i (SD-SDI) 13

14 5. USF-106UDC/DC-12G GUI (Windows GUI) When starting the USF-106UDC/DC-12G GUI software from the USF-GUI-Launcher (Connection Manager), the menu screen as shown below appears. USF-106UDC-12G USF-106DC-12G See the USF-GUI-Launcher Operation Manual (separate manual file) for details on how to launch USF-106UDC/DC -12G GUI using the USF-GUI-Launcher. Main Menu screen is composed of four tabs: Video, Audio, Event and Status. Video tab: Shows a block diagram for the video signal processing, from which menu pages are opened. Audio tab: Shows a block diagram for the audio signal processing, from which menu pages are opened. Event tab: Allows you to save/load menu settings. Status tab: Displays the module information. 14

15 5-1. Video Tab Selecting the Video tab shows the Video Block diagram. Click blocks in the processing order to open menus and configure video processing. USF-106UDC-12G USF-106DC-12G Block name Refer to Block name Refer to Input Select Color Processor Input Select Reference Select Color Processor Synchronizer Ancillary Converter Output Select Video Status

16 Input Select Selecting Input Select in the Video Block diagram opens the following menu screen. Item Default Setting Description Format - - Source Select SDI 2 Terminal Loss Mode Format Detection SDI 1 Input Black (Link) Auto SDI 1 SDI 2a-2d Input Output Black(Link) Black(Separate) Auto Freeze Output Mute Auto Manual Displays the detected input signal format. If unidentifiable video signal is input, for example, Not Supported (1920 * 1080/59.94i) appears. In which case, the input signal is supposed as the one in parenthesis and proceeded. Selects a video signal. Enabled when SDI 2 Terminal is set to Input. Selects input or output for SDI 2a-2d ports. Selects the output mode for input signal loss. Black (Link)(Separate): Outputs a black video. Auto Freeze: Freezes and outputs the last normal video. Output Mute: Stops outputting video signals. See note (*2) for 4K Quad Link 3G input. Auto: Automatically detects and determines the input signal format. Manual: Defines the input signal format using the following parameters. The following parameters are effective if Format Convert is set to Manual. Standard (*1) Horizontal Size Frame Rate (*1) Level 1080 SD Specifies the number of vertical pixels (lines). 1920/ /3840 The number of horizontal pixels. (Fixed) 59.94i / 29.97PsF Follow Input 59.94p 50p 29.97p 23.98p 59.94i/29.97PsF 50i/25PsF 23.98PsF Follow Input Level A Level B(Dual Link) Specifies the frame rate. Settable frame rates according to the Standard selection are displayed. If Standard selection is changed and the frame rate becomes unaccepted, this field becomes vacant. In which case, select the correct frame rate. Specifies the 3G-SDI level. Displayed if Standard and Frame Rate combination is 3G-SDI or 12G-SDI. Follow Input: Uses the same level as input. 16

17 Division Follow Input Follow Input Square 2-Sample Interleave Specifies the Division method. Displayed if Standard setting is Follow Input: Uses 2SI if 2SI is detected in input payload identification codes. In other cases, uses Square. (*1) Unavailable on USF-106DC-12G (*2) Loss Mode: When a part of 4K video signal (Quad Link 3G) is lost: 4K input Loss Mode setting Output image when a part of image is lost 2-Sample Interleave Square Black(Link) Black(Separate) Auto Freeze Black(Link) Black(Separate) Auto Freeze Compensates the loss and restores the whole input image, maintaining its appearance. Replaces lost parts with black to restore the whole input image. The image is displayed with lower luminance. Freezes and outputs the last normal video. Outputs a black video. Outputs the input video displaying black for the lost part Reference Select Selecting Reference Select in the Video Block diagram opens the following menu screen. Reference Select Item Default Setting Description Genlock Genlock Select Genlock 1 Genlock SDI Free Run Genlock 1 Genlock 2 Selects a reference source. Genlock: Uses a reference signal input to the USF frame. SDI: Uses the SDI input. Free Run: Uses the internal signal generator. Selects a reference source from two genlock signals input to the USF frame Synchronizer Selecting Synchronizer in the Video Block diagram opens the following menu screen. 17

18 Mode Item Default Setting Description Adjust Timing (Horizontal) Adjust Timing (Vertical) Freeze Enable Freeze Mode Frame Frame Line AVDL Line(Min) Selects the reference mode. Frame: Horizontal and vertical video signal adjustment referring to genlock signal. Not necessary for video input and genlock to sync. Line: ±1/2H horizontal video signal adjustment output with 1H delay. Synchronization necessary for video input and genlock signal. AVDL: Horizontal video signal adjustment output with 1H delay. Synchronization necessary for video input and genlock signal. Line(Min): ±1/2H horizontal video signal adjustment output with minimum delay. Synchronization necessary for video input and genlock signal. 0 Clock to 2750 Sets the horizontal offset. 0 Line -563 to 563 Sets the vertical offset. Frame Enable Frame Odd Even Turns freeze On/Off. Sets the freeze mode. This setting is ignored if progressive/no signal is input Converter Selecting Converter in the Video Block diagram opens the following menu screen. <If Converter is selected:> Item Default Setting Description Format - - Format Convert (*1) Follow Input Follow Input Manual Specifies the converter output format. If the specified format is not supported, Not Supported is displayed, indicating the actual output format in parenthesis. Specifies the converter output format. Follow Input: Converter input signal format Manual: Signal format specified below. The Output Format block parameters are available if Format Convert is set to Manual. 18

19 Standard (*2) 1080 Horizontal Frame Rate Level Division (*1) Motion Sense Anti Alias Horizontal Anti Alias Vertical Directional Interpolation (*1) 1920/ i/ 29.97PsF Level-A Square Adaptive 0 0 SD (*1) Specifies the number of vertical pixels (lines). 1920/3840 The number of horizontal pixels. (Fixed) 59.94p 50p 29.97p 23.98p 59.94i/29.97PsF 50i/25PsF 23.98PsF Level-A Level-B (Dual Link) Square 2-Sample Interleave Adaptive Field Frame(Odd 1st) Frame(Even 1st) Off -7 to +8 Off -7 to +8 Enable Specifies the frame rate. Settable frame rates according to the Standard selection are displayed. If Standard selection is changed and the frame rate becomes non-compliant, this field becomes vacant. In which case, select the correct frame rate. Specifies the 3G-SDI Level. Displayed when Standard and Frame Rate combination is 3G-SDI or 12G-SDI. Specifies the Division method. Displays if 2160 is selected for Standard setting. Adaptive: Detects whether there is motion or no motion in the scene, and generates an optimal progressive image. Field: Generates a progressive image from one field of an interlaced image. The created image has no motion artifacts, but vertical resolution will be reduced. Frame(ODD 1st): Generates a progressive image from two fields (odd and even) of an interlaced image. Suitable for progressive segmented frame input shot in progressive format. Frame(EVEN 1st): Generates a progressive image from two fields (even and odd) of and interlaced image. Sets the horizontal anti-aliasing for the output video image. -7 to +8 (weak to strong) Set to Off if no anti-aliasing is applied. Enables/disables Edge Detect Level setting. Edge Detect (*1) (*1) Unavailable on USF-106DC-12G (*2) Unavailable on USF-106DC-12G Sets Edge Detect Level. The lower the value, the higher the detection sensitivity, increasing the directional interpolation area. 19

20 <If Delay is selected:> Item Default Setting(Increments) Description Delay (0.5) Converter Delay Frame Frame Minimum Adjustable Allows you to add a delay from 0.5 to 8.0. To add no delay, set to 0.0 Sets the conversion delay mode. Frame: Applies the delay set under Delay. Minimum: Applies the minimum delay. Adjustable: Applies the adjustable delay based on the Delay setting. The following settings are available when Converter Delay is set to Adjustable. Horizontal 0 Clock to 2750 Clock Finely adjusts the horizontal timing. Vertical 0 Line -563 to 563 Line Finely adjusts the vertical timing. <If Resize is selected:> Aspect Convert Item Default Setting Description SD Output (4:3) Full frame 4:3 (4:3) Letterbox 16:9 at top (4:3) Letterbox 14:9 at top (4:3) Letterbox greater than 16:9 (4:3) Full frame 4:3 (4:3) Letterbox 16:9 protected (4:3) Letterbox 14:9 (4:3) Full frame 4:3 alternative 14:9 (4:3) Letterbox 16:9 alternative 14:9 (4:3) Letterbox 16:9 alternative 4:3 (16:9) Letterbox greater than 16:9 (16:9) Full frame 16:9 (16:9) Pillarbox 4:3 (16:9) Full frame protected (16:9) Pillarbox 14:9 (16:9) Pillarbox 4:3 alternative 14:9 (16:9) Full frame 16:9 alternative 14:9 (16:9) Full frame 16:9 alternative 4:3 Selects the aspect ratio when converting HD to SD. 20

21 HD Output (16:9) Full frame 16:9 (16:9) Letterbox greater than 16:9 (16:9) Full frame 16:9 (16:9) Pillarbox 4:3 (16:9) Full frame protected (16:9) Pillarbox 14:9 (16:9) Pillarbox 4:3 alternative 14:9 (16:9) Full frame 16:9 alternative 14:9 (16:9) Full frame 16:9 alternative 4:3 Selects the aspect ratio when converting SD to HD. SD Input 4:3 4:3 16:9 Selects the aspect ratio of SD input. Select the ratio according to the input signal. If the video horizontal direction is compressed, select 16:9. Size/Position Item Default Setting Description Horizontal Size 100.0% % Vertical Size 100.0% % Horizontal Position Vertical Position 0 Pixel Varies depending on the signal 0 Line format. Selects the horizontal image size ratio after conversion. Selects the vertical image size ratio after conversion. Selects the horizontal image position after conversion. Selects the vertical image position after conversion. Crop Item Default Setting Description Left 0 Pixel Crops the image from the left side. Varies Right 0 Pixel depending on Crops the image from the right side. Top 0 Line the signal Crops the image from the top. format. Bottom 0 Line Crops the image from the bottom. Video Signal Horizontal Position Vertical Position Cropping Left Cropping Right Cropping Top Cropping Bottom 2160p to to i/p -960 to to p -640 to to i (NTSC) -360 to to i (PAL) -360 to to <If Noise Reducer is selected:> Unavailable on USF-106DC-12G 21

22 Item Default Setting Description Noise Reducer Enable Enable Red Filter Level Green Filter Level Blue Filter Level Enables/disables Noise Reducer applied for 4K up-conversions. Sets the noise reduction level for low luminance side (darker areas) in RGB. Effective for camera lower random noises. Ineffective for noises in high luminance side (brighter areas) or block noises from compression. The stronger (higher) the Red, Green, Blue or Filter level, the fewer the high-frequency components in video images. 22

23 Color Processor Input Select Item Default Setting Description Color Processor Input Source Synchronizer Synchronizer Converter Selects a source signal for Color Processor. Synchronizer: A signal that was not processed by the Converter. Converter: A signal that was processed by the Synchronizer then Converter Color Processor Selecting Color Processor in the Video Block diagram opens the following menu screen. Processing blocks are shown in the top of the screen and clicking each block (indicated with a yellow underline) opens a submenu in the bottom of the screen Pre Process Amp/Post Process Amp Selecting Color Processor in the Video Block diagram, then Pre Process Amp. or Post Process Amp. (AHDR option is required for Post Process Amp settings) opens the submenu as shown below. Item Default Setting (increments) Description Pre Process button Post Process button - Pre Process Post Process Selects a Process Amp (Pre or Post). Video 100.0% % (0.1) Sets the video level. Y 100.0% % (0.1) Sets the Y level. Chroma 100.0% % (0.1) Sets the Chroma level. Black 0.0% to 100.0% (0.1) Sets the Black level. Hue 0.0deg to 180.0deg. (0.2) Sets the hue. 23

24 Input / Output Gamma / Color Selecting Input Gamma/Color or Output Gamma/Color in the Color Processor flow diagram opens the submenu as shown below. Item Default Setting Description Dynamic Range Conversion Bypass Bypass Operate Operate: Passes through the DRC (Dynamic Range/Color Space) processing. Bypass: Bypasses the DRC processing. The following parameters are available when Dynamic Range Conversion is set to Operate. Input Gamma Curve (EOTF) Input Color Space Output Gamma Curve (OETF) Output Color Space User 01: SDR 2.2 BT.1886 Rec. ITU-R BT. 709 User 01: SDR 2.2 BT.1886 Rec. ITU-R BT. 709 User 01: SDR 2.2 BT.1886 User 02: SDR 2.4 BT.1886 User 03: HLG BT.2100 User 04: HLG (RGB SG1.2) User 05: HLG (RGB SG1.4) User 06: ST 2084 (PQ) User 07: SDR 2.2 BT.709 User 08: S-Log3 User 09: Canon Log 2 User 10: SDR 2.4 BT.1886 Rec. ITU-R BT.709 Rec. ITU-R BT.2020 User 01: S-Gamut/Gamut3 User 02 User 03 User 04 User 05 (Same as Input Gamma Curve) (Same as Input Color Space) Selects a gamma curve for input. Gamma settings as shown at left are respectively stored in files named User 01 to User 10. Gamma setting names and content can be changed by editing files in the Web GUI. (See Sec. 6-5 Gamma Data / Gamut Data. ) These settings are shared by both input and output gamma settings. Selects a color space for input. User Gamut settings are stored in files and these names and content can be changed by editing files in the Web GUI. (See Sec. 6-5 Gamma Data / Gamut Data. ) These settings are shared by both input and output gamut settings. Selects a gamma curve for output. Selects a color space for output. 24

25 GAMMA/COLOR Setting Example Conversion SDR HLG HLG SDR (1) OOTF for HLG (*1) (2) Input Gamma Curve (3) OOTF (*2) (HLG) (4) Inverse OOTF (*3) (HLG) (5) Output Gamma Curve SDR 2.2 BT.709 HLG BT.2100 Enable SDR 2.4 BT.1886 Inverse OOTF HLG BT.2100 HLG BT.2100 SDR 2.2 BT.709 Enable HLG BT.2100 OOTF (*2) SDR 2.4 BT.1886 PQ HLG Enable ST 2084 (PQ) Inverse OOTF (*3) HLG BT.2100 HLG PQ Enable HLG BT.2100 OOTF (*2) ST 2084 (PQ) (*1) See OOTF for HLG below. (*2) See OOTF for HLG (INPUT SIDE) below. (*3) See OOTF for HLG (OUTPUT SIDE) below. : : Scene-referred settings : Display-referred settings Item Default Setting Description OOTF for HLG (1) Enable Set Enable to enable HLG conversion that applies OOTF processing. (AHDR option required) OOTF for HLG (Input Side/Output Side) (AHDR option required) OOTF menus are effective only when HLG BT.2100 is selected under Input / Output Gamma Curve. Select in other cases. If Enable is selected for OOTF for HLG, set OOTF settings by pressing Edit in the OOTF for Y GAMMA (INPUT SIDE) menu or in the OOTF for Y GAMMA (OUTPUT SIDE) menu. For more details on settings, see the GAMMA/COLOR Setting Example table above. (Input Side) (Output Side) Item Default Setting (increments) Description button OOTF button Inverse OOTF button OOTF Inverse OOTF : s OOTF processing. OOTF: Applies OOTF processing to the input side. Inverse OOTF: Applies OOTF processing to the output side. Use the following parameters to specify the OOTF or Inverse OOTF processing operations. System Gamma to 2.0 (0.1) Sets the OOTF gamma value. 25

26 Display Peak 1000 cd/m cd/m2 (100) Display Black 0 cd/m cd/m2 (10) Sets the maximum luminance peak for Display Light. Sets the minimum luminance peak for Display Light Dynamic Range Gain Selecting Dynamic Range Gain in the Color Processor flow diagram opens the submenu as shown below. Item Default Setting (increments) Description Dynamic Range Gain 0.0 db -42.0dB to +42.0dB (0.1) Sets the gain for linear RGB signal values that are EOTF-processed on the Color Processor Differential Color Correct Selecting Differential Color Correct in the Color Processor flow diagram opens the submenu as shown below. White Level Black Level Item Default Setting (increments) Description (R-Y) (G-Y) (B-Y) (R-Y) (G-Y) (B-Y) 100.0% % (0.5) 100.0% % (0.1) Sets the white level by separately adjusting R-Y, G-Y and B-Y components. Sets the black level by separately adjusting R-Y, G-Y and B-Y components. 26

27 Knee (RGB) Clip Selecting Knee(RGB) Clip in the Color Processor flow diagram opens the submenu as shown below. Item Default Setting (increments) Description White Clip Enable Enables/disables Knee Clip (White). The following three parameters are available when White Clip is set to Enable. Output Clip 100.0% 50.0 to 150.0%(0.5) Knee Slope to 1.0 (0.05) Knee Point Black Clip / Enable (Variable) 50.0% to (Variable)(0.5) Enable Sets the upper clip point in the RGB color space. Sets the knee clip slope in high luminance areas. The following parameter is available when Black Clip is set to Enable. Output Clip 0.0% to 50.0% (0.1) Sets the knee clip start point in the high luminance areas. Maximum and default values vary depending on the White Level (RGB white clip) setting. Enables/disables Knee Clip (Black). Sets the lower clip point in the RGB color space Balance Color Correct Selecting Balance Color Correct in the Color Processor flow diagram opens the submenu as shown below. Item Default Setting (increments) Description White Level (RGB) 100.0% % (0.5) Sets the white level by separately adjusting R, G, and B components or simultaneously adjusting them using Master. 27

28 Black Level (RGB) Gamma Curve 100.0% % (0.1) Center Center Black White Range 100.0% % (0.5) Gamma Level (RGB) 100.0% % (0.5) Sets the black level by separately adjusting R, G, and B components or simultaneously adjusting them using Master. Selects a gamma curve type. Sets the upper threshold where the gamma correction is enabled. Minimum is fixed to 0%. A 100% value is based on the OETF Maximum Input. Sets the gamma level by separately adjusting R, G, and B components or simultaneously adjusting them using Master YPbPr Clip Selecting YPbPr Clip in the Color Processor flow diagram opens the submenu as shown below. Item Default Setting (increments) Description button Enable button Enable Setting Enable allows you to specify the following parameters. Enables/disables YPbPr Clip. White 109.0% 50.0 to 109.0% (0.5) Sets the upper Y signal limit. Black -7.5% -7.5 to 50.0% (0.5) Sets the lower Y signal limit. Chroma 113.0% 50.0 to 113.0% (0.5) Sets the upper and lower PbPr signal limits Other Selecting Other in the Color Processor flow diagram opens the submenu as shown below. 28

29 Test Signal Item Default Setting Description Split Mode Operate 100% Color Bar 75% Color Bar Operate V-Split H-Split Bypass Outputs the selected test signal. The following Area Marker settings require an AHDR option. Marker Color Blink Blink Luminance Gamut Red Green Blue Enable Selects the output image display method. Selecting V-Split or H-Split allows you to simultaneously display images before and after correction. Selects the marker mode. : Plots no makers. Luminance: Marks pixels above the high threshold when enabling RGB Clip. Gamut: Marks pixels whose RGB values exceed the range between 0 and 1.0. Selects the marker color. Toggles marker flashing on/off Ancillary Selecting Ancillary in the Video Block diagram opens the following menu screen. <If Multiplexer is selected> Item Default Setting Description Horizontal Ancillary Multiplex Mode Horizontal Ancillary Multiplex Payload ID Vertical Ancillary Multiplex Mode Overwrite Pass Pass Overwrite Pass Blank Pass Overwrite Pass Blank Selects the H ANC data insertion mode. Overwrite: Inserts the internally-processed input H ANC data. Pass: Inserts the input H ANC data without processing. Blank: Embeds no input signal H ANC data. Selects the Payload ID insertion mode. Pass: Inserts input payload ID codes without change. Overwrite: Inserts internally-generated payload ID codes. Selects the V ANC data insertion mode. Pass: Inserts the input V ANC data without processing. Blank: Embeds no V ANC data. ARIB B37 (HD Closed Caption) data embedded in SDI input VANC packets are able to pass through while using Up/Down converters, but the data and video delays are not aligned (controlled). Other closed caption data (SD/Analog/Mobile) are not passed through. 29

30 <If Time Code is selected> Sets the timecode to be inserted in output images. The input timecode is displayed under Input Time Code Status. If no timecode is inserted in input signals, N/A is displayed. Time Code Multiplex Item Default Setting Description ATC (LTC) ATC (VITC) DVITC Enable Enable Enable Sets whether to insert the ATC (LTC) timecode. Sets whether to insert the ATC (VITC) timecode. Sets whether to insert the DVITC timecode. Time Code Generator 1 (LTC), Time Code Generator 1 (VITC/DVITC) Item Default Setting Description Source Mode ATC (LTC) Stay ATC(LTC) ATC(VITC) DVITC Generator Stay Continue Adjust 0-16 to 16 Selects the timecode source. ATC(LTC): LTC timecode inserted in the SDI input. ATC(VITC): VITC timecode inserted in the SDI input. DVITC: VITC timecode inserted in the SD-SDI input. Generator: Generator s timecode, which starts by pressing the Start button and stops by pressing the Stop button. Selects the way to recover when a timecode source loss is detected. Stay: Stops counting up with the last timecode value. Continue: Continues counting up with the timing before loss. : Timecode is cleared to when the source loss is detected. SDI output stops inserting ATC packet and DVITC. Sets the offset from the source timecode. For example, if set to +16, 0:0:0.16 is output when the source timecode count reaches 0:0:0.0. Reset - - Reset the Time Code Generator count to 0:0:0:0. Preset - (Start time) Drop Frame Off Off On Sets the timecode preset value. Enter the preset time and press Preset to start timecode from the preset time. To use drop frame, set to On. 30

31 Output Select Selecting Output Select in the Video Block diagram opens the following menu screen. SDI 1 Item Default Setting Description Operate Bypass Operate Bypass: SDI 1 input signal is output from SDI 1 without processing Video Status Selecting Video Status in the Video Block diagram opens the following screen, showing video input status in the left side and output status in the right side. Pressing the Detail button shows the screen as shown below. The screen shows payload ID codes and error count of the input signal. To reset the error count, press Error Count Reset in the bottom right corner of the screen. 31

32 5-2. Audio Tab Selecting the Audio tab shows the audio block diagram. Click blocks in the processing order to open menus and configure audio processing. Block Name Ref. Block Name Ref. Input Gain Input Delay Converter Delay Sampling Rate Converter Output Output Mapping Audio System Monosum / Downmix / Test Signal Input Status / Output Status Input Selecting Input in the Audio Block diagram opens the following menu screen. Group Alignment Item Default Setting Description Enable Selects whether to perform auto phase adjustment among each SDI input audio group. Enable: Performs auto adjustment. : Performs no auto adjustment (Normal setting). 32

33 Demultiplexer Clock Auto Auto Sync SDI Audio Clock Selects the audio de-embedding method for HD-SDI input. Auto: Uses the audio clock phase data in the SDI input to de-embed audio independently for each group (Synchronous or asynchronous de-embedding). If the audio phase data incorrect or de-embedded audio has noticeable jitter, audio channels in all groups are de-embed synchronously. Sync SDI: Synchronously de-embeds audio channels in all groups without using the audio clock phase data. (*) Audio Clock: Uses the audio clock phase data in the HD-SDI input to de-embed audio independently for each group (Synchronous or asynchronous de-embedding). Error Sensing Normal Normal Sensitive Selects the input audio error detection mode used for Error Fade below. : Detects no errors for Error Fade. Normally do not use. Normal: Detects SDI signal switching, ADP (Audio Data Packet) change and DBN (Data Block Number) switching as Error Fade errors. Sensitive: Adds channel status change and EDP (Extended Data Packet) change (SD-SDI only) to those described above as Error Fade errors. Error Fade Enable : Passes through input audio without using any effects. Enable: Fades out and mutes audio when an input error is detected and fades in when recovered. Audio Polarity Ch.1-16 Normal Normal Invert Selects the (odd number) channel polarity. Selecting Invert inverts the audio channel polarity Input Delay Selecting Input Delay in the Audio Block diagram opens the following menu screen. 33

34 Item Default Setting Description Adjust Video Delay - - Pressing Set adds the delay amount shown at left to Master Delay. Master 5 ms ms Sets the delay offset for all 16 channels. Ch ms ms Each channel delay amount (sum of each delay and Master delay) is displayed. To adjust each channel delay, use the slide bar Sampling Rate Converter Selecting Sampling Rate Converter in the Audio Block diagram opens the following menu screen. Item Default Setting Description Ch.1/2- Ch.15/16 Auto Auto SRC Input Bypass Sets the SRC processing mode for each channel pair. Auto: PCM audio is processed by the SRC. Non-PCM audio is not processed by the SRC. By-pass: Avoids the SRC. Use Bypass for non-pcm audio. Note that to embed non-pcm audio to the SDI output, audio group clock should be properly selected under Multiplex Clock (see Sec Output ). SRC In: Both PCM and non-pcm audio is processed by SRC. This is useful for irregular audio such as PCM audio content with non-pcm metadata. Note that SRC-processed audio may not be played properly if it is a true non-pcm audio signal Output Mapping Selecting Output Mapping in the Audio Block diagram opens the following menu screen. 34

35 Ch.1-16 Item Default Setting Description Embedded Ch.1-16 Embedded Ch Hz Tone 1kHz Tone Silence Downmix L Downmix R Mono Sum Ch. 1-8 Selects an audio source for each channel. Embedded Ch.1-16: 16 audio channels de-embedded from the SDI input. 1kHz, 500Hz Tone: Audio test signals Silence: Mute signal Downmix L/R: Downmixed audio channels Mono Sum Ch1-8: Mono-summed audio channels Monosum / Downmix / Test Signal Selecting Monosum Downmix Test Signal in the Audio Block diagram opens the following menu screen. <If Downmix is selected> Item Default Setting Description Downmix Mode Mix Level Surround Mix Level Center Mix Level Master Stereo -3dB -3dB -3dB Mix Source Assign Left Right Center Left Surround Right Surround Stereo Surround Monaural -3dB -6dB -9dB Off -3dB -4.5 db -6dB -3dB 0dB Auto Embedded Ch.1 Embedded Ch.2 Embedded Ch.3 Embedded Ch.5 Embedded Ch.6 Selects the Downmix mode. Sets the Ls/Rs (Surround channels) level. Setting to Off removes the Ls/Rs channels from mixing sources. Sets the C (Center channel) level. To use the same level as audio sources, set to -3dB. The L/R channel volume of downmixed audio may sound too large. In such cases, decrease the Center level to -4.5dB or -6dB. Sets the entire downmix audio level. If set to Auto, Mix Level - Master changes according to Downmix Mode and Mix Level - Surround settings. Embedded Ch Hz Tone 1kHz Tone Silence Selects an audio source for the selected channel. 35

36 <If Monosum is selected> Item Default Setting Description Source 1-8 L Source 1-8 R Embedded Ch.1-15 (Odd ch) Embedded Ch.2-16 (Even ch) Embedded Ch.1-16 Selects an audio source channel input to each Monosum L and R. < If Test is selected> Test Tone Item Default Setting Description Off Off 500Hz Tone 1kHz Tone Allows you to assign an audio test signal to the embedded audio on the SDI output Gain Selecting Gain in the Audio Block diagram opens the following menu screen. Item Default Setting (increments) Description Master Mute Enable Ch dB -20.0dB to +20.0dB (0.1) Master 0.0dB -20.0dB to +20.0dB (0.1) Setting to Enable mutes all output audio channels. Sets the gain for each channel. Pressing Unity resets values. Sets the gain offset for all channels. Pressing Unity resets values. 36

37 Converter Delay Selecting Output Delay in the Audio Block diagram opens the following menu screen. Item Default Setting Description Converter Delay Enable Enables/disables converter additional delay adjustment for audio to be embedded on the SDI output Output Selecting Output in the Audio Block diagram opens the following menu screen. Item Default Setting Description Group 1-4 Multiplex Enable Group 1-4 Multiplex Clock Enable Auto Enable Auto Reference Input Ch X/X Input Ch X/X Enable: Inserts audio channels. : Inserts no audio channels. Selects a reference clock for each audio group that is used for SDI embedding. Auto: Uses a non-pcm audio if it is included in an audio group for embedding. If there are multiple non-pcm audio channels in the group, a clock of the channel pair with the smallest numbers is selected. Uses a clock synced with the output video if all group channels are PCM. Reference: Uses a clock synced with the output video (Synchronous output with SRC). CH 1/2-15/16: Uses the selected input channel pair clock. To asynchronously output non-pcm audio, select a channel pair. Reference is always applied to SD-SDI input regardless of this setting. 37

38 Audio System Selecting Audio System in the Audio Block diagram opens the following menu screen. Reference Level Grade Resolution Item Default Setting Description Silence Detection Time Silence Detection Level -20 dbfs Professional 24 bit -18 dbfs -20 dbfs Professional Consumer 16 bit 20 bit 24 bit 2 sec 1 10 sec -72 dbfs -48 dbfs -54 dbfs -60 dbfs -66 dbfs -72 dbfs Selects the reference level for digital audio signals. Selects an audio application. Professional: Optimized for professional use. Consumer: Optimized for consumer use. Selects an audio word length. Sets the duration to determine digital audio signals are silent. Sets the audio level to determine audio input signals are silent Input Status / Output Status Selecting Input Status or Output Status in the Audio Block diagram opens the following screen, showing audio status in the SDI input or output signal. 38

39 5-3. Event Tab Selecting the Event tab shows the following screen. Startup Event Item Default Setting Description Last Settings Load Event button - - Save Event button - - Last Settings Default Event Selects an event to be loaded at startup. Last Settings: Loads the settings last used. Default: Resets all settings to default. Event1-100: Loads the selected event memory. Pressing the button loads the event selected below under Event No. Pressing the button saves settings to the event selected below under Event No Unsaved Menu Settings SDI2 Terminal(5-1-1) Split Mode( ) Area Maker( ) Master Mute(5-2-6) 5-4. Status Tab Selecting the Status tab opens the following screen, in which Serial Number, MAC address, Version Information and Option status of the module are displayed. 39

40 6. Web GUI Network settings, module information display, SNMP settings, event, gamma and gamut data import and export are available by connecting to USF-106UDC/DC-12G module cards from a web browser via LAN through USF frames on which the cards are installed. Supported web browsers: Windows 10 Internet Explorer 11 Google Chrome or later Firefox * See the USF frame Operation Manual for details on how to connect to USF-106UDC/DC-12G cards from a web browser through USF frames Module Information Pressing Module Information opens the module and option information as shown below Network Pressing Network opens the screen as shown below and allows you to set IP address and target port of the controlling PC. See Sec. 7 External Control for details. 40

41 6-3. Trap SNMP Trap Settings Allows you to select SNMP trap out settings. If checked (), a trap is sent out to SNMP Manager and not sent out if un-checked. See the Trap list in Sec. 8. SNMP Functions for details on traps. Temperature Alarm * A trap is sent out at 60 seconds intervals when FPGA2 temperature exceeds 90 C. SDI1 Input * A trap is sent out if there is a change in SDI1 input video signal. SDI2a-SDI2d Input * A trap is sent out if there is a change in SDI2a-SDI2d input video signal. Channel ID Input * A trap is sent out if there is a change of channel ID numbers inserted in the 3G-SDI Quad Link 2SI (SDI2a-SDI2d) input. Genlock Input * A trap is sent out if there is a change in genlock input. Audio Input * A trap is sent out if there is a change in audio inserted in SDI input signal. * When FPGA2 temperature exceeds 100 C and the FPGA2 power shutdown function is triggered, a trap is not sent out Download MIB File Clicking this button at the bottom of the screen allows you to download the dedicated MIB (Management Information Base) file used in SNMP managers. See Sec. 8. SNMP Functions for details on MIB files. 41

42 6-4. Event Data Pressing Event Data opens the screen as shown below and allows you to save (Event Export) and load (Event Import) menu settings using the Event function. Event Export Downloads an event (menu setting list) stored in the USF-106UDC/DC-12G and saves it in the PC as a csv file. (1) Select an event number. (2) Press Export to download the specified USF-106UDC/DC-12G event data. Event Import Selects a csv file (with the same data format as downloaded files) in the computer and uploads it to the specified event number in the USF-106UDC/DC-12G. (1) Select an event number. (2) Press Browse to open the dialog and specify a csv file in the PC. (3) Press Import to update the specified event data in the USF-106UDC/DC-12G Gamma Data / Gamut Data Pressing Gamma Data (or Gamut Data) opens the screen as shown below. Gamma Data Export / Gamut Data Export Downloads a Gamma (or Gamut) data stored in the USF-106UDC/DC-12G and saves it in the PC as an original lut (or gmt) file. (1) Select a User Gamma (or Gamut) number. (2) Press Export to download the specified USF-106UDC/DC-12G Gamma (or Gamut) data. Gamma Data Import / Gamut Data Import Selects a lut (or gmt) file (with the same data format as downloaded files) in the computer and uploads it to the specified user data number in the USF-106UDC/DC-12G. (1) Select a User Gamma (or Gamut) number. (2) Press Browse to open the dialog and specify a lut (or gmt) file in the PC. (3) Press Import to update the specified Gamma (or Gamut) data in the USF-106UDC/DC-12G. 42

43 7. Command Control 7-1. Overview USF-106UDC/DC-12G modules can accept commands over LAN. Hereafter, the external control system is called Master and the USF-106UDC/DC-12G is called Slave Communication Method Communication Interface Ethernet 100BASE-TX / 1000BASE-T RJ-45 Command Protocol Overview 1. A Master control Commands sent from a master control: TCP/IP Responses sent from a slave to a master: TCP/IP 2. Status report messages Status report messages from a slave to a master: UDP Responses sent from a master to a slave: UDP 3. Setting command format (sent from a master to a slave): Command are written in 7bit ASCII and ended with [CR][LF], and composed of four index elements separated by three delimiters (comma characters). (See Sec Setting Commands for details.) 7-3. Slave IP Address Setting Slave IP address is the LAN port address of the USF frame in which a USF-106UDC/DC-12G is installed. See the USF frame Operation Manual for details. Specify the port no. same as the Target Port no. set in Sec Master IP Address Setting Master IP Address Setting Set the Master IP address using Web GUI network settings. Connect to USF-106UDC/DC-12G Web GUI. See Sec. 6. Web GUI for details. Selecting the Network Setting tab opens the screen as shown below. Fill in Master IP address in Target IP Address 1 and 2. Set the port no. in Target Port. The port number is same as the Target IP Address 1 and 2. Two IP addresses can be set. Click Apply after changing settings. Data will be transmitted from the Slave to the Master after USF-106UDC/DC-12G power restart Setting Command Master to Slave Messages Commands from Master to Slave are written in 7-bit ASCII and ended with [CR][LF], and 43

OPERATION MANUAL. USF-1013DEMUX Digital Audio Demultiplexer. 2 nd Edition. Software Version Higher

OPERATION MANUAL. USF-1013DEMUX Digital Audio Demultiplexer. 2 nd Edition. Software Version Higher OPERATION MANUAL USF-1013DEMUX Digital Audio Demultiplexer 2 nd Edition Software Version 2.00 - Higher Precautions Important Safety Warnings [Power] Stop [Circuitry Access] Do not place or drop heavy or

More information

OPERATION MANUAL. FA-9600 Frame Synchronizer

OPERATION MANUAL. FA-9600 Frame Synchronizer OPERATION MANUAL FA-9600 Frame Synchronizer FA-96PS FA-964K FA-96UDC FA-96AHDR FA-96AES-UBL FA-96AES-UBLC FA-96EX3G44-R FA-96GPI FA-96DB9-CBL FA-96DIN4-CBL 2 nd Edition - Rev. 1 Edition Revision History

More information

OPERATION MANUAL. USF-402AADC Audio Analog Digital Converter. 1 st Edition

OPERATION MANUAL. USF-402AADC Audio Analog Digital Converter. 1 st Edition OPERATION MANUAL USF-402AADC Audio Analog Digital Converter 1 st Edition Precautions Important Safety Warnings [Operation] Hazard [Transportation] Hazard [Circuitry Access] Do not operate the unit under

More information

OPERATION MANUAL. UFM-30CTL Control Card. 5 th Edition (Version higher)

OPERATION MANUAL. UFM-30CTL Control Card. 5 th Edition (Version higher) OPERATION MANUAL UFM-30CTL Control Card 5 th Edition (Version. 5.00 - higher) Precautions Important Safety Warnings [Power] Stop Do not place or drop heavy or sharp-edged objects on power cord. A damaged

More information

OPERATION MANUAL. FA-10RU for FA-505 Remote Control Unit. 7 th Edition - Rev. 1 Software Version 7.1 or higher

OPERATION MANUAL. FA-10RU for FA-505 Remote Control Unit. 7 th Edition - Rev. 1 Software Version 7.1 or higher OPERATION MANUAL FA-10RU for FA-505 Remote Control Unit 7 th Edition - Rev. 1 Software Version 7.1 or higher Edition Revision History Edit. Rev. Date Description Section 1-2013/12/18 First edition 2-2014/06/25

More information

Part 2. LV5333 LV5381 LV5382 LV7390 LV7770 LV7330 LV5838 LT4610 LT4600 LT4446 LT4100 LT4110 Accessories

Part 2. LV5333 LV5381 LV5382 LV7390 LV7770 LV7330 LV5838 LT4610 LT4600 LT4446 LT4100 LT4110 Accessories Part 2 LV5333 LV5381 LV5382 LV7390 LV7770 LV7330 LV5838 LT4610 LT4600 LT4446 LT4100 LT4110 Accessories LT4610SER01 OPTION LTC IN/OUT GPS IN CW IN AES/EBU/OUT SILENCE OUT WCLK OUT ETHERNET GENLOCK

More information

C8491 C8000 1/17. digital audio modular processing system. 3G/HD/SD-SDI DSP 4/8/16 audio channels. features. block diagram

C8491 C8000 1/17. digital audio modular processing system. 3G/HD/SD-SDI DSP 4/8/16 audio channels. features. block diagram features 4 / 8 / 16 channel LevelMagic2 SDI-DSP with level or loudness (ITU-BS.1770-1/ ITU-BS.1770-2, EBU R128) control 16 channel 3G/HD/SD-SDI de-embedder 16 in 16 de-embedder matrix 16 channel 3G/HD/SD-SDI

More information

Model 7940 SD Aspect Ratio Converter Data Pack

Model 7940 SD Aspect Ratio Converter Data Pack Model 7940 SD Aspect Ratio Converter Data Pack E NSEMBLE D E S I G N S Revision 1.3 SW v2.3.3 This data pack provides detailed installation, configuration and operation information for the 7940 SD Aspect

More information

IQUDC33. 3G/HD/SD-SDI Dual Up, Down and Cross Converter with AES I/O. Inputs & Outputs - IQH3A/1A/3B enclosures. Features

IQUDC33. 3G/HD/SD-SDI Dual Up, Down and Cross Converter with AES I/O. Inputs & Outputs - IQH3A/1A/3B enclosures. Features The provides two channels of multi-rate format conversion and AES embedding and de-embedding for 3G/HD/ SD-SDI signals. Using high quality motion adaptive de-interlacing and flexible scaling technology

More information

3G/HD/SD-SDI Universal Up, Down and Cross Converter

3G/HD/SD-SDI Universal Up, Down and Cross Converter Having both analog and digital interfacing along with multi-rate format conversion for G/HD/SD-SDI digital video signals gives the a high level of flexibility and ability to handle a wide range of interfacing

More information

Model 7500 HD Video Processing Frame Synchronizer Data Pack

Model 7500 HD Video Processing Frame Synchronizer Data Pack Model 7500 HD Video Processing Frame Synchronizer Data Pack E NSEMBLE D E S I G N S Revision 2.1 SW v2.2.0 This data pack provides detailed installation, configuration and operation information for the

More information

C8000. switch over & ducking

C8000. switch over & ducking features Automatic or manual Switch Over or Fail Over in case of input level loss. Ducking of a main stereo or surround sound signal by a line level microphone or by a pre recorded announcement / ad input.

More information

IP LIVE PRODUCTION UNIT NXL-IP55

IP LIVE PRODUCTION UNIT NXL-IP55 IP LIVE PRODUCTION UNIT NXL-IP55 OPERATION MANUAL 1st Edition (Revised 2) [English] Table of Contents Overview...3 Features... 3 Transmittable Signals... 3 Supported Networks... 3 System Configuration

More information

3G/HD/SD dual channel audio embedder/de-embedder

3G/HD/SD dual channel audio embedder/de-embedder 3G/ dual channel audio embedder/de-embedder Dual channel audio embedder/de-embedder, with two independent video channels Being dual channel makes the audio embedder/de-embedder perfect for those pricesensitive

More information

FS3. Quick Start Guide. Overview. FS3 Control

FS3. Quick Start Guide. Overview. FS3 Control FS3 Quick Start Guide Overview The new FS3 combines AJA's industry-proven frame synchronization with high-quality 4K up-conversion technology to seamlessly integrate SD and HD signals into 4K workflows.

More information

Model 7550 HD/SD Video Processing Frame Synchronizer Data Pack

Model 7550 HD/SD Video Processing Frame Synchronizer Data Pack Model 7550 HD/SD Video Processing Frame Synchronizer Data Pack E NSEMBLE D E S I G N S Revision 2.1 SW v2.2.3 This data pack provides detailed installation, configuration and operation information for

More information

Real-time HDR/WCG Conversion with Colorfront Engine Video Processing

Real-time HDR/WCG Conversion with Colorfront Engine Video Processing Real-time HDR/WCG Conversion with Colorfront Engine Video Processing $7,995 US MSRP* Find a Reseller FS-HDR is a HDR to SDR, SDR to HDR and HDR to HDR universal converter/frame synchronizer, designed specifically

More information

OPERATION MANUAL. UFM-30UDC Digital Up/Down/Cross Converter. 2 nd Edition

OPERATION MANUAL. UFM-30UDC Digital Up/Down/Cross Converter. 2 nd Edition OPERATION MANUAL Digital Up/Down/Cross Converter 2 nd Edition Edition Revision History Edit. Rev. Ver. Date Description Where 1-1.02 2010/01/19 2-2.02 2010/06/10 UFM-30CTL control supported Precautions

More information

HDR PRODUCTION CONVERTER UNIT HDRC OPERATION MANUAL 1st Edition. [English]

HDR PRODUCTION CONVERTER UNIT HDRC OPERATION MANUAL 1st Edition. [English] HDR PRODUCTION CONVERTER UNIT HDRC-4000 OPERATION MANUAL 1st Edition [English] Table of Contents Overview... 3 Features...3 System Configuration...4 Name and Function of Parts... 5 Front Panel...5 Rear

More information

Flame USF-212AS USF-105AS USF-212S USF-105S

Flame USF-212AS USF-105AS USF-212S USF-105S USF-105AS/105S Universal modular frame designed for compact, economical system building. Build an optimal system for your environment from a full array of modules. USF-212AS/212S Available frames 1U size.

More information

Model 7600 HD/SD Embedder/ Disembedder Data Pack

Model 7600 HD/SD Embedder/ Disembedder Data Pack Model 7600 HD/SD Embedder/ Disembedder Data Pack E NSEMBLE D E S I G N S Revision 2.1 SW v2.0.1 This data pack provides detailed installation, configuration and operation information for the 7600 HD/SD

More information

12G/3G/HD/SD Dual Channel Multi Purpose Signal Processor FA-9600 FA-9600

12G/3G/HD/SD Dual Channel Multi Purpose Signal Processor FA-9600 FA-9600 12G/3G/HD/SD Dual Channel Multi Purpose Signal Processor Dual channel frame synchronizer, SDR/HDR processor, converter, is the next generation technology from FOR-A. Offering exceptional conversion format

More information

USF-105S USF-212S. Two genlock inputs (Black burst (BB) or tri-level sync) (USF-212S/212AS)

USF-105S USF-212S. Two genlock inputs (Black burst (BB) or tri-level sync) (USF-212S/212AS) Universal System Frame Universal System Frame USF-105S Universal modular frame designed for compact, economical system building. Build an optimal system for your environment from a full array of modules.

More information

Model 7130 HD Downconverter and Distribution Amplifier Data Pack

Model 7130 HD Downconverter and Distribution Amplifier Data Pack Model 7130 HD Downconverter and Distribution Amplifier Data Pack E NSEMBLE D E S I G N S Revision 1.0 SW v1.0 www.ensembledesigns.com 7130-1 Contents MODULE OVERVIEW 3 Audio Handling 3 Control 3 Metadata

More information

CEDAR Series. To learn more about Ogden CEDAR series signal processing platform and modular products, please visit

CEDAR Series. To learn more about Ogden CEDAR series signal processing platform and modular products, please visit CEDAR Series The CEDAR platform has been designed to address the requirements of numerous signal processing modules. Easily-installed components simplify maintenance and upgrade. To learn more about Ogden

More information

IP LIVE PRODUCTION UNIT NXL-IP55 USO RESTRITO. OPERATION MANUAL 1st Edition (Revised 2) [English]

IP LIVE PRODUCTION UNIT NXL-IP55 USO RESTRITO. OPERATION MANUAL 1st Edition (Revised 2) [English] IP LIVE PRODUCTIO UIT XL-IP55 USO RESTRITO OPERATIO MAUAL 1st Edition (Revised 2) [English] Table of Contents Overview... 3 Features... 3 Transmittable Signals... 3 Supported etworks... 3 System Configuration

More information

Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.com

Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.com Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Read this first Product documentation Covered products The following Tektronix products are covered by

More information

OPERATION MANUAL. MV-410HS Multi Viewer. MV-410HS Command MV-410HS Layout Editor MV-410HS Live Viewer MV-410HS Web Browser Layout Editor Tutorial

OPERATION MANUAL. MV-410HS Multi Viewer. MV-410HS Command MV-410HS Layout Editor MV-410HS Live Viewer MV-410HS Web Browser Layout Editor Tutorial OPERATION MANUAL MV-410HS Multi Viewer MV-410HS Command MV-410HS Layout Editor MV-410HS Live Viewer MV-410HS Web Browser Layout Editor Tutorial 4 th Edition Operation Manuals 1. MV-410HS 37 pages 2. MV-410HS

More information

Marshall Electronics. Operating Instructions. Warranty. Model No. QVW Quad-Viewer Monitor with 4K Format Support

Marshall Electronics. Operating Instructions. Warranty. Model No. QVW Quad-Viewer Monitor with 4K Format Support Warranty Marshall Electronics warranties to the first consumer that this QVW-2710 LCD monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container,

More information

Models 5360 and 5365 Four Channel Analog to Digital Video Converters and Embedders Data Pack

Models 5360 and 5365 Four Channel Analog to Digital Video Converters and Embedders Data Pack Models 5360 and 5365 Four Channel Analog to Digital Video Converters and Embedders Data Pack E NSEMBLE D E S I G N S Revision 1.3 SW v2.2.1 This data pack provides detailed installation, configuration

More information

IQDEC01. Composite Decoder, Synchronizer, Audio Embedder with Noise Reduction - 12 bit. Does this module suit your application?

IQDEC01. Composite Decoder, Synchronizer, Audio Embedder with Noise Reduction - 12 bit. Does this module suit your application? The IQDEC01 provides a complete analog front-end with 12-bit composite decoding, synchronization and analog audio ingest in one compact module. It is ideal for providing the bridge between analog legacy

More information

GFT Channel Digital Delay Generator

GFT Channel Digital Delay Generator Features 20 independent delay Channels 100 ps resolution 25 ps rms jitter 10 second range Output pulse up to 6 V/50 Ω Independent trigger for every channel Fours Triggers Three are repetitive from three

More information

OPERATION MANUAL. FA-9520 (FA-9500 Mode) Frame Synchronizer FA-95PS FA-95DACBL FA-95AIO FA-95CO FA-95D-D/DE-E FA-95ALA FA-95RU* FA-10DCCRU*

OPERATION MANUAL. FA-9520 (FA-9500 Mode) Frame Synchronizer FA-95PS FA-95DACBL FA-95AIO FA-95CO FA-95D-D/DE-E FA-95ALA FA-95RU* FA-10DCCRU* OPERATION MANUAL FA-9520 (FA-9500 Mode) Frame Synchronizer FA-95PS FA-95DACBL FA-95AIO FA-95CO FA-95D-D/DE-E FA-95ALA FA-95RU* FA-10DCCRU* 3 rd Edition - Rev. 5 SOFT Ver. 8.11 or higher Edition Revision

More information

Ultra TQ V3.4 Update 4KTQ Ultra TQ Update 1

Ultra TQ V3.4 Update 4KTQ Ultra TQ Update 1 Ultra TQ Ultra TQ Update 1 About this Document Notice This documentation contains proprietary information of Omnitek. No part of this documentation may be reproduced, stored in a retrieval system or transmitted

More information

31 4K / UHD HDR Reference Monitor

31 4K / UHD HDR Reference Monitor 31 4K / UHD HDR Reference Monitor HDR : PQ, HLG, S-Log3 1,000cd/m² High Brighthness 1,000,000:1 High Contrast ratio 12G-SDI Single Link 4K 6G-SDI Dual Link 2-S.I. 4K 3G-SDI Quad Link Square Division &

More information

V pro8 QUICK START GUIDE

V pro8 QUICK START GUIDE QUICK START GUIDE Welcome to your V pro8 FIRST STEPS POWERING ON CONNECTING YOUR COMPUTER Thank you for buying the Lawo V pro8, a true high-quality product developed and manufactured in Rastatt, Germany.

More information

C8000. sync interface. External sync auto format sensing : AES, Word Clock, Video Reference

C8000. sync interface. External sync auto format sensing : AES, Word Clock, Video Reference features Standard sync module for a frame Internal sync @ 44.1 / 48 / 88.2 / 96kHz External sync auto format sensing : AES, Word Clock, Video Reference Video Reference : Black Burst (NTSC or PAL) Composite

More information

FS1-X. Quick Start Guide. Overview. Frame Rate Conversion Option. Two Video Processors. Two Operating Modes

FS1-X. Quick Start Guide. Overview. Frame Rate Conversion Option. Two Video Processors. Two Operating Modes FS1-X Quick Start Guide Overview Matching up and synchronizing disparate video and audio formats is a critical part of any broadcast, mobile or post-production environment. Within its compact 1RU chassis,

More information

DAC20. 4 Channel Analog Audio Output Synapse Add-On Card

DAC20. 4 Channel Analog Audio Output Synapse Add-On Card DAC20 4 Channel Analog Audio Output Synapse Add-On Card TECHNICAL MANUAL DAC20 Analog Audio Delay Line Lange Wagenstraat 55 NL-5126 BB Gilze The Netherlands Phone: +31 161 850 450 Fax: +31 161 850 499

More information

Projector Management Application Version 7.00 Instruction Guide

Projector Management Application Version 7.00 Instruction Guide Projector Management Application Version 7.00 Instruction Guide Contents 1 INTRODUCTION... 4 1.1 OUTLINE... 4 1.2 SYSTEM... 4 2 INSTALLATION... 5 2.1 SYSTEM REQUIREMENTS... 5 2.2 PROJECTOR MANAGEMENT APPLICATION

More information

User Manual. Kudos Pro UHD1000. Single Channel Linear SD/HD/3G/UHDTV1 Converter.

User Manual. Kudos Pro UHD1000. Single Channel Linear SD/HD/3G/UHDTV1 Converter. User Manual Kudos Pro UHD1000 Single Channel Linear SD/HD/3G/UHDTV1 Converter www.s-a-m.com Information and Notices Information and Notices Copyright and Disclaimer Copyright protection claimed includes

More information

DRAFT RELEASE FOR BETA EVALUATION ONLY

DRAFT RELEASE FOR BETA EVALUATION ONLY IPM-16 In-Picture Audio Metering User Manual DRAFT RELEASE FOR BETA EVALUATION ONLY Ver 0.2 April 2013 1 Contents Introduction...3 In Picture Audio Meter Displays...4 Installation...7 External Audio Board

More information

HDMI-8x8. MicroQ User Manual APANTAC LLC, 7556 SW BRIDGEPORT ROAD, PORTLAND, OR TEL: , FAX:

HDMI-8x8. MicroQ User Manual APANTAC LLC, 7556 SW BRIDGEPORT ROAD, PORTLAND, OR TEL: , FAX: HDMI-8x8 MicroQ User Manual COPYRIGHT and TRADEMARK All rights reserved by APANTA LCC, Porland, Oregon, USA. No part of this document may be reproduced in any form or by any means without written permission

More information

KudosPro & KudosPro-IQ Single, Dual and Quad Channel Format and Frame Rate Conversion

KudosPro & KudosPro-IQ Single, Dual and Quad Channel Format and Frame Rate Conversion Datasheet KudosPro & KudosPro-IQ Single, Dual and Quad Channel Format and Frame Rate Conversion Supporting all broadcast formats, offering the widest range of I/O connectivity, including IP, and delivering

More information

FS-HDR Quick Start Guide

FS-HDR Quick Start Guide FS-HDR Quick Start Guide Overview FS-HDR, a 1RU, rack-mount, universal converter/frame synchronizer, is designed specifically to meet the HDR (High Dynamic Range) and WCG (Wide Color Gamut) needs of broadcast,

More information

Features of the 745T-20C: Applications of the 745T-20C: Model 745T-20C 20 Channel Digital Delay Generator

Features of the 745T-20C: Applications of the 745T-20C: Model 745T-20C 20 Channel Digital Delay Generator 20 Channel Digital Delay Generator Features of the 745T-20C: 20 Independent delay channels - 100 ps resolution - 25 ps rms jitter - 10 second range Output pulse up to 6 V/50 Ω Independent trigger for every

More information

OPERATION MANUAL. FA-9500 Frame Synchronizer FA-95PS FA-95DACBL FA-95RU * FA-95CO FA-95D-D/DE-E FA-95AIO FA-95ALA. 10 th Edition SOFT Ver. 8.

OPERATION MANUAL. FA-9500 Frame Synchronizer FA-95PS FA-95DACBL FA-95RU * FA-95CO FA-95D-D/DE-E FA-95AIO FA-95ALA. 10 th Edition SOFT Ver. 8. OPERATION MANUAL FA-9500 Frame Synchronizer FA-95PS FA-95DACBL FA-95RU * FA-95CO FA-95D-D/DE-E FA-95AIO FA-95ALA 10 th Edition SOFT Ver. 8.00 higher The latest FA-9500 Operation Manual can be downloaded

More information

3G, HD & SD-SDI. Embedders & De-Embedders. Catalogue

3G, HD & SD-SDI. Embedders & De-Embedders. Catalogue 3G, HD & SD- s & De-s 2016 Catalogue & Video Interfaces - Video s & De-s 3G, HD & SD- s & De-s Still in the familiar Redbox chassis offering rackmounting as standard and a universal AC power supply, these

More information

C8188 C8000 1/10. digital audio modular processing system. 4 Channel AES/EBU I/O. features. block diagram. 4 balanced AES inputs

C8188 C8000 1/10. digital audio modular processing system. 4 Channel AES/EBU I/O. features. block diagram. 4 balanced AES inputs features 4 balanced AES inputs Input Sample Rate Converters (SRC) 4 balanced AES outputs Relay bypass for pairs of I/Os Relay wait time after power up Master mode (clock master for the frame) 25pin Sub-D,

More information

Network Camera Operating Manual

Network Camera Operating Manual Network Camera Operating Manual Model No. WV-NW484S Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Preface About these

More information

USO RESTRITO. UFM-147DFS Frame Synchronizer and Time Base Corrector. 1 st Edition - Rev. 4

USO RESTRITO. UFM-147DFS Frame Synchronizer and Time Base Corrector. 1 st Edition - Rev. 4 UFM-147DFS Frame Synchronizer and Time Base Corrector 1 st Edition - Rev. 4 Stop Stop Hazard Caution Caution place or drop heavy or sharp-edged objects on power cord. A damaged cord can cause fire or electrical

More information

8500 Composite/SD Legalizer and Video Processing Frame Sync

8500 Composite/SD Legalizer and Video Processing Frame Sync Legalizer The module is a composite Legalizer, Proc Amp, TBC and Frame Sync. The Legalizer is a predictive clipper which insures signal levels will not exceed those permitted in the composite domain. While

More information

OPERATION MANUAL. HVS-30RU Remote Unit. HVS-30FP Front Panel. 3 rd Edition

OPERATION MANUAL. HVS-30RU Remote Unit. HVS-30FP Front Panel. 3 rd Edition OPERATI MANUAL HVS-30RU Remote Unit HVS-30FP Front Panel 3 rd Edition Edition Revision History Edit. Rev. Date Description Where 1-009/04/4 1 1 009/06/05 OSD menu corrected. OSD menu changed. Description

More information

FS-HDR Quick Start Guide

FS-HDR Quick Start Guide FS-HDR Quick Start Guide Overview FS-HDR, a 1RU, rack-mount, universal converter/frame synchronizer, is designed specifically to meet the HDR (High Dynamic Range) and WCG (Wide Color Gamut) needs of broadcast,

More information

Single Channel Linear SD/HD/3G/UHDTV1 Converter with Analog and AES Audio Connectors. Single Channel Linear SD/HD/3G/12G/UHDTV1 Converter

Single Channel Linear SD/HD/3G/UHDTV1 Converter with Analog and AES Audio Connectors. Single Channel Linear SD/HD/3G/12G/UHDTV1 Converter User Manual Kudos Pro UHD1100 Single Channel Linear SD/HD/3G/UHDTV1 Converter Kudos Pro UHD1100 Audio Single Channel Linear SD/HD/3G/UHDTV1 Converter with Analog and AES Audio Connectors Kudos Pro UHD1200

More information

OPERATION MANUAL. MBP-12RU MBP-1244 Remote Control Unit. 1 st Edition - Rev.3

OPERATION MANUAL. MBP-12RU MBP-1244 Remote Control Unit. 1 st Edition - Rev.3 OPERATION MANUAL MBP-12RU MBP-1244 Remote Control Unit 1 st Edition - Rev.3 Precautions Important Safety Warnings [Power] Caution Operate unit only on the specified supply voltage. Disconnect power cord

More information

SPG8000A Master Sync / Clock Reference Generator Release Notes

SPG8000A Master Sync / Clock Reference Generator Release Notes xx ZZZ SPG8000A Master Sync / Clock Reference Generator Release Notes This document supports firmware version 2.5. www.tek.com *P077122204* 077-1222-04 Copyright Tektronix. All rights reserved. Licensed

More information

CDV07. Analog video distribution amplifier(s)

CDV07. Analog video distribution amplifier(s) CDV07 Analog video distribution amplifier(s) TECHNICAL MANUAL CDV07 Analog video distribution amplifier Lange Wagenstraat 55 NL-5126 BB Gilze The Netherlands Phone: +31 161 850 450 Fax: +31 161 850 499

More information

User s Manual. Network Board. Model No. WJ-HDB502

User s Manual. Network Board. Model No. WJ-HDB502 Network Board User s Manual Model No. WJ-HDB502 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. CONTENTS Introduction...

More information

OPERATING GUIDE. M-Vision Cine 3D series. High Brightness Digital Video Projector 16:9 widescreen display. Rev A August A

OPERATING GUIDE. M-Vision Cine 3D series. High Brightness Digital Video Projector 16:9 widescreen display. Rev A August A OPERATING GUIDE M-Vision Cine 3D series High Brightness Digital Video Projector 16:9 widescreen display 112-022A Digital Projection M-Vision Cine 3D series CONTENTS Operating Guide CONTENTS About this

More information

FA Preliminary. 12G/3G/HD/SD Dual Channel Multi Purpose Signal Processor FA-9600

FA Preliminary. 12G/3G/HD/SD Dual Channel Multi Purpose Signal Processor FA-9600 Preliminary 12G/3G/HD/SD Dual Channel Multi Purpose Signal Processor Dual channel frame synchronizer, SDR/HDR processor, converter, is the next generation technology from FOR-A. Offering exceptional conversion

More information

OPERATING GUIDE. HIGHlite 660 series. High Brightness Digital Video Projector 16:9 widescreen display. Rev A June A

OPERATING GUIDE. HIGHlite 660 series. High Brightness Digital Video Projector 16:9 widescreen display. Rev A June A OPERATING GUIDE HIGHlite 660 series High Brightness Digital Video Projector 16:9 widescreen display 111-9714A Digital Projection HIGHlite 660 series CONTENTS Operating Guide CONTENTS About this Guide...

More information

3G/HD/SD audio embedder/de-embedder

3G/HD/SD audio embedder/de-embedder 3G/ audio embedder/de-embedder is a very powerful embedding/ de-embedding product: working with 3Gb/s, HD and SD sources and providing flexible embedding and de-embedding of external audio. Using piggybacks

More information

Model 5240 Digital to Analog Key Converter Data Pack

Model 5240 Digital to Analog Key Converter Data Pack Model 5240 Digital to Analog Key Converter Data Pack E NSEMBLE D E S I G N S Revision 2.1 SW v2.0 This data pack provides detailed installation, configuration and operation information for the 5240 Digital

More information

AMX AMX-1842 HD/SD 4 AES Embedder Guide to Installation and Operation M January Description.

AMX AMX-1842 HD/SD 4 AES Embedder Guide to Installation and Operation M January Description. Description The is a high-quality embedder which embeds up to four AES 24-bit 48 khz digital audio signals into a single HD/SD serial digital video signal. It includes audio and video signal presence detection

More information

FS4 Quick Start Guide

FS4 Quick Start Guide FS4 Quick Start Guide Overview FS4 is AJA s flagship frame synchronizer and converter, offering incredible versatility and connectivity in a sleek and compact 1RU frame for all your 4K/ UltraHD/2K/HD/SD

More information

Ultra 4K Tool Box. Version Release Note

Ultra 4K Tool Box. Version Release Note Ultra 4K Tool Box Version 2.1.43.0 Release Note This document summarises the enhancements introduced in Version 2.1 of the software for the Omnitek Ultra 4K Tool Box and related products. It also details

More information

HDR & WIDE COLOR GAMUT

HDR & WIDE COLOR GAMUT HDR & WIDE COLOR GAMUT How do we get there and remaining backwards compatible Peter Schut, CTO VP of R&D peter.schut@axon.tv www.axon.tv IN THIS PRESENTATION Some Basics Stuff that puzzled me, maybe puzzles

More information

3Gb/s, HD, SD 16ch digital audio embedder with embedded domain audio shuffler, mixer and framesync COPYRIGHT 2018 AXON DIGITAL DESIGN BV

3Gb/s, HD, SD 16ch digital audio embedder with embedded domain audio shuffler, mixer and framesync COPYRIGHT 2018 AXON DIGITAL DESIGN BV 3Gb/s, HD, SD 16ch digital audio embedder with embedded domain audio shuffler, mixer and framesync A Synapse product COPYRIGHT 2018 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY

More information

OPERATION MANUAL. UFM-147DFS Frame Synchronizer and Time Base Corrector. 1 st Edition - Rev. 4

OPERATION MANUAL. UFM-147DFS Frame Synchronizer and Time Base Corrector. 1 st Edition - Rev. 4 OPERATION MANUAL UFM-147DFS Frame Synchronizer and Time Base Corrector 1 st Edition - Rev. 4 Precautions Important Safety Warnings [Power] Stop Do not place or drop heavy or sharp-edged objects on power

More information

JS007WQK HEAVY DUTY WIRELESS REVERSING KIT 7 LCD DIGITAL QUAD RECORDING MONITOR with WATERPROOF CCD CAMERA

JS007WQK HEAVY DUTY WIRELESS REVERSING KIT 7 LCD DIGITAL QUAD RECORDING MONITOR with WATERPROOF CCD CAMERA JS007WQK HEAVY DUTY WIRELESS REVERSING KIT 7 LCD DIGITAL QUAD RECORDING MONITOR with WATERPROOF CCD CAMERA The JS007WQK is loaded with userfriendly features and is ideal for use in heavy duty vehicles.

More information

EEG A1452 SCTE-104 Inserter Frame Card

EEG A1452 SCTE-104 Inserter Frame Card EEG A1452 SCTE-104 Inserter Frame Card Product Manual EEG Enterprises, Inc. 586 Main Street Farmingdale, New York 11735 TEL: (516) 293-7472 FAX: (516) 293-7417 Copyright EEG Enterprises, Inc. 2017 All

More information

AX20. Atlas 19.5" 3G-SDI/HDMI Field and Studio Monitor with 3D LUTs & Scopes. Quick Start Guide. What s Included CHECKED BY

AX20. Atlas 19.5 3G-SDI/HDMI Field and Studio Monitor with 3D LUTs & Scopes. Quick Start Guide. What s Included CHECKED BY AX20 Quick Start Guide Atlas 19.5" 3G-SDI/HDMI Field and Studio Monitor with 3D LUTs & Scopes What s Included 1 x Atlas 19.5" Monitor 1 x AC Adapter 1 x Sunhood CHECKED BY AX20 FRONT 1920 x 1080 19.5 inch

More information

HCC6830N Series. HD/SD Digital Video Signal Cross Converter. User Manual

HCC6830N Series. HD/SD Digital Video Signal Cross Converter. User Manual HCC6830N Series HD/SD Digital Video Signal Cross Converter User Manual Product Information Model: HCC6830N Series HD/SD Digital Video Signal Cross Converter Version: V010001 Release Date: August 21th,

More information

EBU Digital AV Sync and Operational Test Pattern

EBU Digital AV Sync and Operational Test Pattern www.lynx-technik.com EBU Digital AV Sync and Operational Test Pattern Date: Feb 2008 Revision : 1.3 Disclaimer. This pattern is not standardized or recognized by the EBU. This derivative has been developed

More information

USO RESTRITO AMX AMX-1881 HD/SD 8 AES Embedder Guide to Installation and Operation M November Description.

USO RESTRITO AMX AMX-1881 HD/SD 8 AES Embedder Guide to Installation and Operation M November Description. Description The is a high-quality embedder which embeds up to eight AES 24-bit 48 khz digital audio signals into a single HD/SD serial digital video signal. It includes audio and video signal presence

More information

TG8000 Multiformat Test Signal Generator Release Notes

TG8000 Multiformat Test Signal Generator Release Notes xx ZZZ TG8000 Multiformat Test Signal Generator Release Notes This document supports Firmware Version 3.2. www.tek.com *P077068907* 077-0689-07 Copyright Tektronix. All rights reserved. Licensed software

More information

Model: DT-X92H 2. 9 Rack Mount Broadcast 3GSDI LCD Monitor. User Manual. Ver:V1.0.0V01. Please read this User Manual throughout before using.

Model: DT-X92H 2. 9 Rack Mount Broadcast 3GSDI LCD Monitor. User Manual. Ver:V1.0.0V01. Please read this User Manual throughout before using. Model: DT-X92H 2 9 Rack Mount Broadcast 3GSDI LCD Monitor User Manual Ver:V1.0.0V01 Please read this User Manual throughout before using. Preface Congratulations on your purchase of this product. Please

More information

VXF7 QUICKSTART GUIDE. 7" 4K Full HD HDMI/3G-SDI On-Camera Monitor

VXF7 QUICKSTART GUIDE. 7 4K Full HD HDMI/3G-SDI On-Camera Monitor VXF7 QUICKSTART GUIDE 7" K Full HD HDMI/G-SDI On-Camera Monitor What s Included x VXF7 Monitor x AC Adapter x Camera Shoe Mount (SM-0) x Screen Cleaning Wipe x Screen Protector x Sunhood x Canon E6 Battery

More information

Z-IP Stream 004/008. User Guide and Installation Manual. Four or Eight Input QAM Encoder / Modulator

Z-IP Stream 004/008. User Guide and Installation Manual. Four or Eight Input QAM Encoder / Modulator Z-IP Stream 004/008 User Guide and Installation Manual Four or Eight Input QAM Encoder / Modulator MPEG-2 / H.264 HD ENCODER with QAM /IP/ & ASI Outputs Contents Safety Precautions... 3 Package Contents...

More information

3Gb/s, HD, SD embedded domain Dolby E/D/D+ decoder and to Dolby E encoder with audio shuffler and optional audio description processor

3Gb/s, HD, SD embedded domain Dolby E/D/D+ decoder and to Dolby E encoder with audio shuffler and optional audio description processor GEE200/230 HEE200/230 3Gb/s, HD, SD embedded domain Dolby E/D/D+ decoder and to Dolby E encoder with audio shuffler and optional audio description processor A Synapse product COPYRIGHT 2016 AXON DIGITAL

More information

TG700 TV Signal Generator Platform Release Notes

TG700 TV Signal Generator Platform Release Notes xx ZZZ TG700 TV Signal Generator Platform This document supports firmware version 5.6. www.tektronix.com *P077022807* 077-0228-07 Copyright Tektronix. All rights reserved. Licensed software products are

More information

7 3G -SDI Monitor w/ Signal Conversion QUICKSTART GUIDE

7 3G -SDI Monitor w/ Signal Conversion QUICKSTART GUIDE What s included x Monitor x AC Adapter x Camera Shoe Mount (SM-0) x DV Battery Plate (Check one) Checked by DV BATTERY PLATES -: Canon 900, Sony L, Panasonic D Battery Plates VX7 c-: Canon E6, Nikon EL,

More information

INFORMATION TO USER CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN

INFORMATION TO USER CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN INFORMATION TO USER CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

More information

LV 58SER06 3G-SDI INPUT INSTRUCTION MANUAL

LV 58SER06 3G-SDI INPUT INSTRUCTION MANUAL LV 58SER06 3G-SDI INPUT INSTRUCTION MANUAL Contents 1. INTRODUCTION... 1 1.1 Scope of Warranty... 1 1.2 Operating Precautions... 1 1.2.1 Maximum Allowable Input Voltage... 1 1.2.2 Shorting and Applying

More information

4K (3840x2160) Ultra HD 4 wire toolbox with LUT based color space and dynamic range converter And optional Dolby E processing

4K (3840x2160) Ultra HD 4 wire toolbox with LUT based color space and dynamic range converter And optional Dolby E processing 4K (3840x2160) Ultra HD 4 wire olbox with based color space and dynamic range converter And optional Dolby E processing A Synapse product COPYRIGHT 2017 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART

More information

Marshall Electronics. Pro A/V Communications VMV-402-SH. 3G/HD/SD-SDI Quad-viewer/Switcher with Audio Meter Display. User Manual.

Marshall Electronics. Pro A/V Communications VMV-402-SH. 3G/HD/SD-SDI Quad-viewer/Switcher with Audio Meter Display. User Manual. Marshall Electronics Pro A/V Communications VMV-402-SH 3G/HD/SD-SDI Quad-viewer/Switcher with Audio Meter Display User Manual Table of Contents 1. Introduction... 3 2. Features... 3 3. Package Contents...

More information

SPG700 Multiformat Reference Sync Generator Release Notes

SPG700 Multiformat Reference Sync Generator Release Notes xx ZZZ SPG700 Multiformat Reference Sync Generator Release Notes This document supports firmware version 2.1. www.tek.com *P077123100* 077-1231-00 Copyright Tektronix. All rights reserved. Licensed software

More information

LT 4600 MULTIFORMAT VIDEO GENERATOR INSTRUCTION MANUAL (MAIN) USO RESTRITO

LT 4600 MULTIFORMAT VIDEO GENERATOR INSTRUCTION MANUAL (MAIN) USO RESTRITO LT 4600 MULTIFORMAT VIDEO GENERATOR INSTRUCTION MANUAL (MAIN) TABLE OF CONTENTS GENERAL SAFETY SUMMARY... I 1. INTRODUCTION... 1 1.1 Scope of Warranty... 1 1.2 Trademark Acknowledgments... 1 1.3 Operating

More information

Simple all-in-one design style with front stereo speakers and natural ventilation system

Simple all-in-one design style with front stereo speakers and natural ventilation system LMD-B170 17-inch cost-effective, lightweight basic grade Full HD LCD monitor for versatile use Overview Lightweight and slim Full HD (1920 x 1080) LMD-B Series monitor with an excellent cost-performance

More information

UltraPioneerAVR3 HSPI User s Guide A HomeSeer HS3 plug-in to enable control of Pioneer A/V Receivers that support the IP & RS232 control system.

UltraPioneerAVR3 HSPI User s Guide A HomeSeer HS3 plug-in to enable control of Pioneer A/V Receivers that support the IP & RS232 control system. UltraPioneerAVR3 HSPI User s Guide A HomeSeer HS3 plug-in to enable control of Pioneer A/V Receivers that support the IP & RS232 control system. Copyright 2014 ultrajones@hotmail.com Revised 01/20/2014

More information

2 MHz Lock-In Amplifier

2 MHz Lock-In Amplifier 2 MHz Lock-In Amplifier SR865 2 MHz dual phase lock-in amplifier SR865 2 MHz Lock-In Amplifier 1 mhz to 2 MHz frequency range Dual reference mode Low-noise current and voltage inputs Touchscreen data display

More information

TECHNICAL MANUAL. Cheetah VIDEO MATRIX ROUTERS 3G VIDEO INPUT CARD WITH AUDIO DE-EMBEDDING AND 3G VIDEO OUTPUT CARD WITH AUDIO EMBEDDING

TECHNICAL MANUAL. Cheetah VIDEO MATRIX ROUTERS 3G VIDEO INPUT CARD WITH AUDIO DE-EMBEDDING AND 3G VIDEO OUTPUT CARD WITH AUDIO EMBEDDING TECHNICAL MANUAL Cheetah VIDEO MATRIX ROUTERS 3G VIDEO INPUT CARD WITH AUDIO DE-EMBEDDING AND 3G VIDEO OUTPUT CARD WITH AUDIO EMBEDDING Publication: 81-9059-0658-0, Rev. A August, 2009 Thank You!! for

More information

P-2 Installing the monitor (continued) Carry out as necessary

P-2 Installing the monitor (continued) Carry out as necessary P-2 Installing the monitor (continued) Carry out as necessary Using the monitor without the bezel MDT552S satisfies the UL requirements as long as it is used with the bezel attached. When using the monitor

More information

Installer Guide. Follow these instructions to set up the PowerLite Pro Cinema 1080 projector and HQV video processor.

Installer Guide. Follow these instructions to set up the PowerLite Pro Cinema 1080 projector and HQV video processor. Installer Guide Follow these instructions to set up the PowerLite Pro Cinema 1080 projector and HQV video processor. For more information, see the manuals that came with these products. Setting Up the

More information

BrightEye NXT Frame Synchronizers

BrightEye NXT Frame Synchronizers BrightEye NXT Frame Synchronizers More Function. More Integration. More Performance. More Function. More Integration. More Performance. 12 Frame Syncs in 1RU Amazing Features And Amazingly Compact The

More information

TANDEM10-VF 3G/HD/SD audio embedder/de-embedder

TANDEM10-VF 3G/HD/SD audio embedder/de-embedder 3G/HD/SD embedder/de-embedder is a very powerful flexible four group embedder/de-embedder system. You can use it when you need to embed de-embed at the same time if you want a single product use as an

More information

Copyright 2018 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted or transmitted in any

Copyright 2018 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted or transmitted in any MCTRL660 PRO Independent Controller Product Version: Document Number: V1.0.0 NS110100560 Copyright 2018 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced,

More information

VSP 198CVS Quick Start

VSP 198CVS Quick Start VIEWSIZE THE WORLD VSP 198CVS Quick Start Max 2048 1152@60Hz/2560 1152 50Hz input/output resolution User customize output resolution 3G/HD/SD-SDI input Multiple cascade mapping for super resolution DVI

More information

GFT Channel Slave Generator

GFT Channel Slave Generator GFT1018 8 Channel Slave Generator Features 8 independent delay channels 1 ps time resolution < 100 ps rms jitter for optical triggered delays 1 second range Electrical or optical output Three trigger modes

More information