Control Application Guide Version 4.12

Transcription

1 3M Digital Projector Control Application Guide Version 4.12 For Models: X21i / X26i / X30n / X31/ X31i / X35n / X36 / X36i / WX36 / WX36i / X46 / X46i / X56 / X62w / X64w / X70 / X75 / X80 / X90 / X90K / X90W / X95 / X95i Revision History Revision Date Page(s) Changed Description of Change 4/2009 All pages First edition, models X70, X75, X80, X90, X95, X95i 4/2010 All pages Add models X62w, X64w, X30n, X35n 6/2010 All pages Add models X31, X36, X46 7/2010 All pages Add model WX36 12/2011 All pages Add model X56 3/2012 All pages Add model X21i, X26i 8/2012 All pages Add model X31i, X36i, X46i, WX36i Intended Use The 3M Digital Projectors are designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware, and common line voltages (100V to 240V AC, 50/60 Hz).The use of other replacement lamps, outdoor operation, or different voltages has not been tested and could damage the projector, peripheral equipment and/or create a potentially unsafe operating condition. 3M Digital Projectors are designed to operate in a normal office environment. 100V - 240V AC, 50/60 Hz 16 to 29 C (60 to 85 F) 10-80% RH (without condensation) m ( feet) above sea level The ambient operating environment should be free of airborne smoke, grease, oil and other contaminates that can effect the operation or performance of the projector. The 3M logo and 3M are trademarks of the 3M Company. Other trademarks used herein are the properties of their respective owners. Important Notice All statements, technical information, and recommendations related to 3M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty and Limited Remedy 3M warrants that when the 3M Product is used according to 3M s Intended Use Statement ( it will perform satisfactorily for the warranted durability period as stated in the applicable 3M Product Manual in effect at the time of purchase. The warranties stated in the applicable 3M Product Manuals are exclusive and are made in place of any and all express or implied warranties or conditions, including any implied warranty of merchantability or fitness for a particular purpose, or any industry practice or custom or trade usage. Failure to follow the instructions contained in the appropriate 3M Product Manual or to use the 3M Product in accordance with 3M s Intended Use Statement will void all warranties and limited remedies. EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL, 3M SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, REVENUE OR BUSINESS) RESULTING FROM, OR IN ANY WAY RELATED TO PERFORMANCE, USE OR INABILITY TO USE ANY OF THE 3M PRODUCT. This limitation applies regardless of the legal theory upon which damages are sought. If 3M Product is defective within the applicable warranty period, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M Product or to refund the purchase price of the 3M Product. All replaced parts or products become property of 3M. If the 3M Product is repaired, 3M will repair the defective part(s) with a new or used part(s). If the 3M Product is replaced, 3M will replace the product with the same or equivalent model and with a new or refurbished product. In the case of an approved warranty claim, the replacement 3M Product will carry only the remaining term of the original 3M Product s warranty period as stated in the applicable 3M Product Manual. For warranty service, you must provide proof of the date of the original purchase, otherwise the manufacturing code date will be used to establish the start date of the warranty. 3M Product Manuals include durability statements and may include limitations specific to the product(s) being used or its intended applications, which take precedence over any statement made here. Warranty terms, limitations and exclusions may differ outside the United States of America. 3M Mobile Interactive Solutions Division 6801 River Place Boulevard Tel: Austin, Texas [Aug. 2012]

2 Contents 1. INTRODUCTION OUTLINE SYSTEM INSTALLATION SYSTEM REQUIREMENTS PROJECTOR CONTROL INSTALLATION OPERATING INSTRUCTIONS CREATE LOGIN ACCOUNTS START APPLICATION MAIN WINDOW EXIT APPLICATION APPLICATION MINIMIZATION CONFIGURE PROJECTOR SETTINGS BUTTONS ADVANCED CONTROL IMAGE SEND TO PROJECTOR MY IMAGE (E-SHOT) SOFTWARE VERSION Microsoft and Windows is the registered trademark of Microsoft Corporation in the US and other countries. Pentium is the registered trademark of Intel Corporation in the US and other countries. All other trademarks are the property of their respected owners. Warning This software is free. The manufacturer has no responsibility for any errors that may occur while using this software. This software, or any product used with this software may not be used for any act which obstructs the Maintenance of the International Peace and Safety. 2

3 1. Introduction 1.1 Outline The Projector Control Application, PJCtrl is software that allows you to control the projectors on the network or connected via RS232C cable. With this application, the Computer can control projectors on the network remotely. 1.2 System The following diagram shows a typical network diagram for the Projector Tool. RS-232C LAN LAN LAN LAN LAN Ethernet / RS-232C Converter RS-232C Use a UTP cable category 5 or higher for a Local Area Network cable. Use a cross type cable when using a serial cable. The Projector Control Application can control up to 5 of the same model projectors. 3

4 2. Installation 2.1 System Requirements The minimum System requirements for the Projector Control Application are shown below. (1) Operating System Windows 2000 Professional Windows XP Home Edition / Professional Windows Vista Home Basic / Home Premium / Business / Ultimate / Enterprise Windows 7 Starter / Home Basic / Home Premium / Professional / Ultimate / Enterprise (2) CPU Pentium3 500MHz or higher (3) Memory 128MB or higher (4) Hard disk space Minimum 20MB free space for installation (5) Serial port This port is required to control projectors by RS-232C (6) LAN port This port is required to control projectors through a network 4

5 2.2 Projector Control Installation Please follow next steps to install the software into your computer. (1) Double click the file InstForPJCtrl.exe. (2) Select the language (English, Japanese or Chinese [Simplified]) during the installation process. And then click [OK]. (3) Click [Next]. (4) Read License Agreement and select I accept the terms of the license agreement and click [Next] if you agree the license agreement. Otherwise, click [Cancel] and stop the installation. (5) Confirm the program folder, and then click [Next]. 5

6 (6) Confirm the install folder and program folder again, and then click [Next]. (7) Click [Finish] to complete the Projector Control Application setup wizard. 6

7 3. Operating Instructions 3.1 Create login accounts The Projector Control Application requires a login name and password to launch the software. The Projector User Administration Tool helps you to create new user accounts How to launch Double Click PJUsrEdit.exe that is located on same folder that you installed Projector Control Application. It automatically launches the Projector User Administration Tool, if no user accounts are created yet. Also Projector Control Application has a short cut [File] [User Configuration] to launch Projector User Administration Tool How to exit Select [File] [Exit] from the menu or click [x] bottom of the top right corner. If the changes are made, you will be required to confirm the changes Main Window Menu User List (1) Menu Menu Sub Menu Description File Save Save user data Exit Exit Edit Add New User Create new user Change User Edit user account Delete User Delete user account (2) User List The status in the User List is described below. Row name Description User Name Username (ID) Description Comment Man shows that the user can access to the PJMan (Projector Management Tool) Ctrl shows that the user can access to the PJCtrl (Projector Control Tool) Img shows that the user can access to the PJImg (Projector Image Tool) FTP shows that the user can access to the PJTransfer (Projector File Transfer Tool). 7

8 3.1.4 Creating new user account Select [Edit] [Add New User] or right clicks on the user list and select [Add New User]. The following dialog window appears. User Name --- Define user name, up to 20 characters Description --- Add comments, up to 50 characters User Rights --- Define accessibility. It defines the accessibility for the application software by each user account. The user can use allocation only marked application software. Select All --- Select all application software. UnSel All --- Unselect all application software. Press [OK] button after entering user name. The [Change Password] dialog appears. Enter new password and confirm entered password. The password is up to 20 characters and case sensitive Edit user account Double click a username on the user list or select [Edit] [Change User] after choosing user to open edit dialog. You can edit username, description and accessibility (user rights). Click the button to change password. Enter old and new password, and re-enter new password to confirm Delete user account Select [Edit] [Delete User] or right click on the user list and select [Delete User]. The confirmation window will popup Save user account Select [File] [Save]. The date is stored in the file, C:\Program Files\Common Files\Projector Tools\config \UserList. 8

9 3.2 Start Application Select Windows [Start] [Program] [Projector Tools] [Projector Control Application]. The login window is appeared. Enter the username and password that is created by Projector User Administration Tool. After logged in, a Configuration window is appeared. Please refer the section 3.6 Configure Projector Settings on page 9. Once the configuration is done, click [OK]. 3.3 Main Window Click the icon to perform each function. The functions are shown below. [About] icon [Image Send] icon [Advanced] icon [Freeze Off] icon [Freeze On] icon [Mute] icon [Volume] icon [Blank Off] icon [Blank On] icon [Input Source] icon [Power Off] icon [Power On] icon [Configuration] icon Note: Some icons may not show up depending on the model you choose. For example, [Image Send] icon is only for the models CL33X, CL35X, CL67N, CL69N, CL86X, PL90X, PL92X, PL96X, WX36, WX36i, X21i, X26i, X30N, X31, X31i, X35N, X35NK, X36, X36i, X46, X46i, X56, X90 and X90K. 9

10 3.4 Exit Application Right click the PJCtrl icon on the task tray at the right-bottom corner and select [exit]. And click [Yes] on the confirmation window. Also you can click the [x] icon on the right top corner of main window to exit application. 10

11 3.5 Application Minimization You can hide the main window into the task tray to click the minimization icon on the window. Right click the PJCtrl icon on the task tray and select [Show] to restore window. 3.6 Configure Projector Settings You need to setup the projector settings such as connection type and projector model. Click the [Configuration] icon to configure settings. (1) Projector Model Select a projector model that you want to control from the drop down list. The icons on the main window and Advanced Control items are vary due to the model differences. The discovery feature is available on CL33X, CL35X, CL67N, CL69N, CL72X, CL73W, CL73X, CL86X, NE7, PL90X, PL92X, PL93X, PL95X, PL96X, WX36, WX36i, X21i, X26i, X30N, X31, X31i, X35N, X35NK, X36, X36i, X46, X46i, X56, X62w, X64w, X90, X90K, X90w, X95, X95K, X95i and X95iK. The discovery feature will find all projectors on the network if the discovery feature is supported. Once the discovery is done, the discovery result is stored in the software and you can look up this result from Configuration window. [NOTE] Windows Security Alert will be shown on your display when the discovery function activates, if Windows Firewall is On on Windows XP SP2 or later. Please choose Unblock to add the software onto the exception list. Also other firewall security software may block the discovery function. In that case, please add the software to the safe list or disable firewall software when you use discovery function. 11

12 (2) Connection Setting RS-232C NETWORK Projector List --- Check the radio button and choose COM port number for serial connection. --- Check the radio button for network connection. Please enter the IP address of projector and port number. You can choose the projector from the discovered list if the discovery function is already run. The default port number of PL75X, PL80X, X70, X75, X75C, X75K, X80, X80C and X80K is 23. The default of CL33X, CL35X, CL67N, CL69N, CL72X, CL73W, CL73X, CL86X, NE7, PL93X, PL96X, WX36, WX36i, X21i, X26i, X30N, X31, X31i, X35N, X35NK, X36, X36i, X46, X46i, X56, X62w, X64w, X90, X90K, X90w, X95, X95K, X95i and X95iK is 23 or Authentication and Password is available for CL33X, CL35X, CL67N, CL69N, CL72X, CL73W, CL73X, CL86X, NE7, PL90X, PL93X, PL95X, PL92X, PL96X, WX36, WX36i, X21i, X26i, X30N, X31, X31i, X35N, X35NK, X36, X36i, X46, X46i, X56, X62w, X64w, X90, X90K, X90w, X95, X95K, X95i and X95iK. --- The list shows the projectors that you register. [Insert] : Insert new projector into the projector list. [Update] : Update selected projector setting and save changes. [Delete] : Delete selected projector from the projector list. When you manage multiple projectors at the same time, you need to pick one projector and select a checkbox in order to be a delegate for displaying CH selection and volume level. Please rarify IP settings to make sure the PJCtrl is able to communicate with the projector by ping command. (3) Configure Buttons Click the Show Buttons TAB to configure which bottoms you want to use. Check the checkbox that you want to show as the button. The configuration window can be displayed if you make a right click on the task tray icon. Icon Size: Also you can choose icon size from 24, 36 or 48 dots. Always on top: Always on top option allows that the PJCtrl application always show up foreground. 12

13 (4) Option Skip user check: Check skip user check option if you don t need the user login process at application launch. If you need to check user account at each time, uncheck this option. Skip configuration dialog: Check skip configuration dialog option if you don t need to show the configuration window at application launch. User Configuration: Launch Projector User Administration Tool. Edit CH Label: Display Edit CH Label window. Configure CH label text that shows underneath each CH icon. The text length is depending on the icon size as shown below. Icon size 24x24: up to 4 characters Icon size 36x36: up to 6 characters Icon size 48x48: up to 8 characters This is an example how CH label is looks like. Update Interval: Set the interval period to update CH status from the projector. 13

14 3.7 Buttons Power ON: Power the projector on. Power OFF: Power the projector off. Input Source: Switch the input source (CH). The icon of current input channel is shown as selected icon (hollow). When you manage multiple projectors, the status of delegated projector is shown. Blank ON: Blank the screen. Blank OFF: Un-blank the screen. Volume: Volume up and down. The control bar appears when you click the icon. When you manage multiple projectors, the delegated projector s value is displayed. Please note that the value may not the same among multiple projectors. Mute: Sound mute. Toggled. Freeze ON: Freeze image. Freeze OFF: Unfreeze image. 14

15 3.8 Advanced Control You can access the advanced control functions through Advanced Control Menu. Click the ADV icon to open the advanced control window. Choose the target projector to control. Advanced control items are depending on the projector model. PL80X / X70 / X80 / X80C / X80K [STATUS] Tab Power Input Source Error Status Blank On /Off Mute Freeze Lamp Time Filter Time [MAIN] Tab Bright Contrast Aspect Whisper Mirror Language Displays the current power status. / Cool down Displays the current input source. M1-D / RGB / BNC / Video / S-Video / Component Displays the current error status. Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Lamp Time Error / Cold Error / Filter Error / Other Error Displays the current blank on/off status. Displays the current mute status. Displays the current freeze status. Normal / Freeze Displays the usage time for the current lamp. Displays the usage time for the current filter. Lamp Time / Filter Time Adjusts the brightness. [-]: Decrease the brightness value. [+]: Increase the brightness value. Adjusts the contrast. [-]: Decrease the contrast value. [+]: Increase the contrast value. Switches the mode for aspect ratio. 4:3 / 16:9 / Small / Normal Turn off/on the whisper mode. Normal / Whisper Switches the mode for mirror status. Normal / H:Invert / V:Invert / H&V:Invert Switches the menu language. English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese / Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish Bright / Contrast 15

16 [PICTURE-1] Tab Gamma Custom Gamma Color Temp Custom User R Custom User G Custom User B Color Bal R Color Bal G Color Bal B Sharpness Color Tint My Memory [PICTURE-2] Tab Position H Phase H Size Over Scan Switches the gamma mode. Normal / Cinema / Dynamic / Custom Adjusts the gamma data. [-]: Decrease the gamma value. [+]: Increase the gamma value. Switches the color temperature mode. Low / Middle / High / User Adjusts the red color level for the user mode of red color temperature. 100 / 90 / 80 / 70 / 60 / 50 Adjusts the green color level for the user mode of green color temperature. 100 / 90 / 80 / 70 / 60 / 50 Adjusts the blue color level for the user mode of blue color temperature. 100 / 90 / 80 / 70 / 60 / 50 Adjusts the red color balance. [-]: Decrease the red color balance value. [+]: Increase the red color balance value. Adjusts the green color balance. [-]: Decrease the green color balance value. [+]: Increase the green color balance value. Adjusts the blue color balance (blue). [-]: Decrease the blue color balance value. [+]: Increase the blue color balance value. Adjusts the sharpness. [-]: Decrease the sharpness value. [+]: Increase the sharpness value Adjusts the strength of whole color. [-]: Decrease the color value. [+]: Increase the color value Adjusts the tint. [-]: Decrease the tint value. [+]: Increase the tint value. Loads the data from the memory. Load1 / Load2 / Load3 / Load4 Saves the current adjustment data into the memory. Save1 / Save2 / Save3 / Save4 [Execute]: Performs each function. Color Bal R / Color Bal G / Color Bal B / Sharpness / Color / Tint Adjust the display position. [ ]: Increase the vertical position value. [ ]: Decrease the vertical position value. [ ]: Increase the horizontal position value. [ ]: Decrease the horizontal position value. Adjust the horizontal phase to eliminate flicker. [-]: Decrease the horizontal phase value. [+]: Increase the horizontal phase value. Adjust the horizontal size. [-]: Decrease the horizontal size value. [+]: Increase the horizontal size value. Adjust the over-scan ratio. [-]: Decrease the over-scan value. [+]: Increase the over-scan value. V Position / H Position / H Size / Over Scan 16

17 [INPUT] Tab Color Space Component Video Format 3D-YCS Video NR S2-Aspect P.IN P. Input P.IN P. Position P.IN P. Audio P.IN P. Size Power Up Input [AUTO] Tab Adjust Power Off Power On Search [SCREEN] Tab Blank Start Up MyScreen Size MyScreen Lock Menu Position Message Switches the mode for color space. Auto / RGB / SMPTE240 / REC709 / REC601 Switches the function of the COMPONENT port. Component / Scart RGB Switches the mode for video format. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Turns off/on the 3D-YCS. Switches the noise reduction mode. Low / Middle / High Turns off/on the S2-aspect function Switches the signal input port for the child window. Video / S-Video Switches the display position of the child window. Upper Left / Upper Right / Bottom Left / Bottom Right Switches the audio source of the child window. RGB / Video Switches the display size of the child window. Off / Large / Small Switches the signal input port to display just when the projector is turned on. Last Input / M1-D / RGB / BNC / Component / S-Video / Video [Execute]: Performs the automatic adjustment feature. Adjusts the time to count down to automatically turn the projector off. [-]: Decrease auto power off time. [+]: Increase auto power off time. Turns off/on the auto power on function. Turns off/on the automatic signal search function. Switches the mode for the blank screen. Blue / White / Black / MyScreen / Original Switches the mode for the start-up screen. Original / Off / MyScreen Switches the size of the MyScreen. Full / x1 Turn off/on the MyScreen lock function. Adjusts the menu position. [ ]: Increase the vertical menu position value. [ ]: Decrease the vertical menu position value. [ ]: Decrease the horizontal menu position value. [ ]: Increase the horizontal menu position value. Turns off/on the message function. Menu Position V / Menu Position H 17

18 [OPTION] Tab Volume Speaker IR Remote IR Remote ID Auto Adjust Lens Type Lens Lock [OTHER] Tab Power Input Source Blank Mute Freeze Magnify Keystone V Keystone H Adjusts the volume. [-]: Decrease the volume value. [+]: Increase the volume value. Turns off/on the built-in speaker. Turns off/on the remote sensor. Front () Rear () Top () Switches the number as an ID number for remote control. All / 1 / 2 / 3 Switches the auto adjustment enable function. Disable / Enable Switches the lens type currently used. Auto / 1 / 2 / 3 / 4 / 5 Turns off/on the lens lock function. Turns off/on the power. Switchs the input source. M1-D / RGB / BNC / Video / S-Video / Component Turns off/on the blank. Turns off/on the mute. Turn off/on the freeze. Normal / Freeze Adjusts the magnify setting. [-]: Decrease the magnify value. [+]: Increase the magnify value. Adjusts the vertical keystone distortion. [-]: Decrease the vertical keystone value. [+]: Increase the vertical keystone value. Adjusts the horizontal keystone distortion. [-]: Decrease the horizontal keystone value. [+]: Increase the horizontal keystone value. Keystone V / Keystone H 18

19 PL75X / X75 / X75C / X75K [STATUS] Tab Power Input Source Error Status Blank Mute Freeze Lamp Time Filter Time [PICTURE] Tab Bright Contrast Gamma Color Temp Color Tint Sharpness My Memory Displays the current power status. / Cool down Displays the current input source. DVI / RGB1 / RGB2 / Video / S-Video / Component Displays the current error status. Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Lamp Time Error / Cold Error / Filter Error / Other Error Displays the current blank on/off status. Displays the current mute status. Displays the current freeze status. Normal / Freeze Displays the usage time for the current lamp. Displays the usage time for the current filter. Lamp Time / Filter Time Adjusts the brightness. [-]: Decrease the brightness value. [+]: Increase the brightness value. Adjusts the contrast. [-]: Decrease the contrast value. [+]: Increase the contrast value. Switches the gamma mode. #1-Custom / #2-Custom / #3-Custom / #1-Default / #2-Default / #3-Default Switches the mode of color temperature. Low / Middle / High / Custom Adjusts the strength of whole color. [-]: Decrease the color value. [+]: Increase the color value Adjusts the tint. [-]: Decrease the tint value. [+]: Increase the tint value. Adjusts the sharpness. [-]: Decrease the sharpness value. [+]: Increase the sharpness value. Loads the data on the memory. Load1 / Load2 / Load3 / Load4 Saves the current adjustment data into the memory. Save1 / Save2 / Save3 / Save4 [Execute]: Performs each function. Initialize the selected function Bright / Contrast / Color / Tint / Sharpness 19

20 Gamma - Custom - User Gamma Pattern Changes the test pattern. Off / 9 steps Gray scale / 15 steps Gray scale / Ramp User Gamma Point 1 Adjusts the user gamma point 1. [-]: Decrease the user gamma point 1 value. [+]: Increase the user gamma point 1 value. User Gamma Point 2 Adjusts the user gamma point 2. [-]: Decrease the user gamma point 2 value. [+]: Increase the user gamma point 2 value. User Gamma Point 3 Adjusts the user gamma point 3. [-]: Decrease the user gamma point 3 value. [+]: Increase the user gamma point 3 value. User Gamma Point 4 Adjusts the user gamma point 4. [-]: Decrease the user gamma point 4 value. [+]: Increase the user gamma point 4 value. User Gamma Point 5 Adjusts the user gamma point 5. [-]: Decrease the user gamma point 5 value. [+]: Increase the user gamma point 5 value. User Gamma Point 6 Adjusts the user gamma point 6. [-]: Decrease the user gamma point 6 value. [+]: Increase the user gamma point 6 value. User Gamma Point 7 Adjusts the user gamma point 7. [-]: Decrease the user gamma point 7 value. [+]: Increase the user gamma point 7 value. User Gamma Point 8 Adjusts the user gamma point 8. [-]: Decrease the user gamma point 8 value. [+]: Increase the user gamma point 8 value. Color Temp - Custom - User Gamma Pattern Color Temp Gain R Color Temp Gain G Color Temp Gain B Color Temp Offset R Color Temp Offset G Color Temp Offset B [IMAGE] Tab Aspect Over Scan Position H Phase H Size Auto Adjust Changes the test pattern. Off / 9 steps Gray scale / 15 steps Gray scale / Ramp Adjusts the red color temperature gain. [-]: Decrease the red color temp gain value. [+]: Increase the red color temp gain value. Adjusts the green color temperature gain. [-]: Decrease the green color temp gain value. [+]: Increase the green color temp gain value. Adjusts the blue color temperature gain. [-]: Decrease the blue color temp gain value. [+]: Increase the blue color temp gain value. Adjusts the red color temperature offset. [-]: Decrease the red color temperature offset value. [+]: Increase the red color temperature offset value Adjusts the green color temperature offset. [-]: Decrease the green color temperature offset value. [+]: Increase the green color temperature offset value Adjusts the blue color temperature offset. [-]: Decrease the blue color temperature offset value. [+]: Increase the blue color temperature offset value Switches the mode for aspect ratio. 4:3 / 16:9 / Small / Normal Adjusts the over-scan ratio. [-]: Decrease the over-scan value. [+]: Increase the over-scan value. Adjusts the display position. [ ]: Increase the vertical position value. [ ]: Decrease the vertical position value. [ ]: Increase the horizontal position value. [ ]: Decrease the horizontal position value. Adjusts the horizontal phase to eliminate flicker. [-]: Decrease the horizontal phase value. [+]: Increase the horizontal phase value. Adjusts the horizontal size. [-]: Decrease the horizontal size value. [+]: Increase the horizontal size value. [Execute]: Performs the automatic adjustment feature. Over Scan / V Position / H Position / H Size 20

21 [VIDEO QLTY.] Tab Progressive 3D-YCS Video NR [INPUT] Tab Color Space Component Video Format DVI [SETUP] Tab Whisper Mirror Volume Stereo IR Remote [SCREEN] Tab Language Menu Position OSD Bright. Blank Start Up MyScreen Lock Message [OPTION] Tab One Touch Auto Search Auto Off Auto Adjust Switches the progress mode. Off / TV / Film Switches the 3D-YCS mode. Off / Normal / Still Image Switches the noise reduction mode. Low / Middle / High Switches the mode for color space. Auto / RGB / SMPTE240 / REC709 / REC601 Switches the function of COMPONENT VIDEO port. Component / Scart RGB Switches the mode for video format. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Select a signal source of the DVI-D port. DVD / Computer Turns off/on the whisper mode. Normal / Whisper Switches the mode for mirror status. Normal / H:Invert / V:Invert / H&V:Invert Adjusts the volume. [-]: Decrease the volume value. [+]: Increase the volume value. Switches the internal speaker output mode. Mono / Stereo Turns off/on the remote sensor. Front () Top () Switches the OSD (On Screen Display) language. English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese / Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese Adjusts the menu position. [ ]: Increase the vertical menu position value. [ ]: Decrease the vertical menu position value. [ ]: Decrease the horizontal menu position value. [ ]: Increase the horizontal menu position value. Switches the brightness level of the OSD (On Screen Display). [-]: Decrease the OSD brightness value. [+]: Increase the OSD brightness value. Switches the mode for the blank screen. Blue / White / Black / MyScreen / Original Switches the mode for the start-up screen. Original / Off / MyScreen Turns off/on the MyScreen lock function. Turns off/on the message function. Menu Position V / Menu Position H Turns off/on the automatic keystone correction function. Turns on/off the automatic signal search function. Adjusts the time to count down to automatically turn the projector off. [-]: Decrease the auto power off time. [+]: Increase the auto power off time. Disable/Enable the automatic adjustment. Disable / Enable 21

22 [OTHER] Tab Power Input Source Mode Blank Mute Freeze Magnify Keystone V Keystone H Auto Keystone Turns off/on the Power. Switches the input source. DVI / RGB1 / RGB2 / Video / S-Video / Component Switches the mode of picture type. Normal / Cinema / Dynamic / Custom Custom is displayed only. It cannot be set. Turns off/on the blank. Turns off/on the mute. Turns off/on the freeze. Normal / Freeze Adjusts the magnify setting. [-]: Decrease the magnify value. [+]: Increase the magnify value. Adjusts the vertical keystone distortion. [-]: Decrease the vertical keystone value. [+]: Increase the vertical keystone value. Adjusts the horizontal keystone distortion. [-]: Decrease the horizontal keystone value. [+]: Increase the horizontal keystone value. [Execute]: Performs the automatic keystone distortion correction. Keystone V / Keystone H 22

23 PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK [STATUS] Tab Power Input Source Error Status Blank Mute Freeze Lamp Time Filter Time [PICTURE] Tab Brightness Contrast Gamma Color Temp Color Tint Sharpness Active Iris My Memory Displays the current power status. / Cool down Displays the current input source. X62w RGB1 / RGB2 / Video / S-Video / Component / MIU X64w Computer1 / Computer2 / Video / S-Video / Component / MIU PL90X / X90 / X90K RGB1 / RGB2 / M1-D / Video / S-Video / Component X90w RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU PL95X / X95 / X95K / X95i / X95iK RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU Displays the current error status. Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Lamp Time Error / Cold Error / Filter Error / Other Error Displays the current blank on/off status. Displays the current mute status. Displays the current freeze status. Normal / Freeze Displays the usage time for the current lamp. Displays the usage time for the current filter. Lamp Time / Filter Time Adjusts the brightness. [-]: Decrease the brightness value. [+]: Increase the brightness value. Adjusts the contrast. [-]: Decrease the contrast value. [+]: Increase the contrast value. Switches the gamma mode. PL90X / X62w / X90 / X90K / X90w #1-Custom / #2-Custom / #3-Custom / #4-Custom / #5-Custom / #1-Default / #2-Default / #3-Default / #4-Default / #5-Default PL95X / X64w / X95 / X95K / X95i / X95iK #1-Custom / #2-Custom / #3-Custom / #4-Custom / #5-Custom / #6-Custom / #1-Default / #2-Default / #3-Default / #4-Default / #5-Default / #6-Default Switches the color temperature mode. PL90X / X62w / X90 / X90K / X90w High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Custom-High / Custom-Mid / Custom-Low / Custom-Hi-Bright-1 / Custom-Hi-Bright-2 PL95X / X64w / X95 / X95K / X95i / X95iK High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / Custom-High / Custom-Mid / Custom-Low / Custom-Hi-Bright-1 / Custom-Hi-Bright-2 / Custom-Hi-Bright-3 Adjusts the strength of whole color. [-]: Decrease the color value. [+]: Increase the color value Adjusts the tint. [-]: Decrease the tint value. [+]: Increase the tint value. Adjusts the sharpness. [-]: Decrease the sharpness value. [+]: Increase the sharpness value. Changes the active iris control mode. Off / Theater / Presentation This function is not displayed for X62w / X64w. Loads the data from the memory. Load1 / Load2 / Load3 / Load4 Saves the current adjustment data into the memory. Save1 / Save2 / Save3 / Save4 [Execute]: Performs each function. Initialize the selected function Brightness / Contrast / Color / Tint / Sharpness 23

24 Gamma - Custom - User Gamma Pattern Changes the test pattern. Off / 9 steps Gray scale / 15 steps Gray scale / Ramp User Gamma Point 1 Adjusts the user gamma point 1. [-]: Decrease the user gamma point 1 value. [+]: Increase the user gamma point 1 value. []: Initialize the user gamma point 1 value. User Gamma Point 2 Adjusts the user gamma point 2. [-]: Decrease the user gamma point 2 value. [+]: Increase the user gamma point 2 value. []: Initialize the user gamma point 2 value. User Gamma Point 3 Adjusts the user gamma point 3. [-]: Decrease the user gamma point 3 value. [+]: Increase the user gamma point 3 value. []: Initialize the user gamma point 3 value. User Gamma Point 4 Adjusts the user gamma point 4. [-]: Decrease the user gamma point 4 value. [+]: Increase the user gamma point 4 value. []: Initialize the user gamma point 4 value. User Gamma Point 5 Adjusts the user gamma point 5. [-]: Decrease the user gamma point 5 value. [+]: Increase the user gamma point 5 value. []: Initialize the user gamma point 5 value. User Gamma Point 6 Adjusts the user gamma point 6. [-]: Decrease the user gamma point 6 value. [+]: Increase the user gamma point 6 value. []: Initialize the user gamma point 6 value. User Gamma Point 7 Adjusts the user gamma point 7. [-]: Decrease the user gamma point 7 value. [+]: Increase the user gamma point 7 value. []: Initialize the user gamma point 7 value. User Gamma Point 8 Adjusts the user gamma point 8. [-]: Decrease the user gamma point 8 value. [+]: Increase the user gamma point 8 value. []: Initialize the user gamma point 8 value. Color Temp - Custom - User Gamma Pattern Color Temp Gain R Color Temp Gain G Color Temp Gain B Color Temp Offset R Color Temp Offset G Color Temp Offset B Changes the test pattern. Off / 9 steps Gray scale / 15 steps Gray scale / Ramp Adjusts the red color temperature gain. [-]: Decrease the red color temperature gain value. [+]: Increase the red color temperature gain value. []: Initialize the red color temperature gain value. Adjusts the green color temperature gain. [-]: Decrease the green color temperature gain value. [+]: Increase the green color temperature gain value. []: Initialize the green color temperature gain value. Adjusts the blue color temperature gain. [-]: Decrease blue red color temperature gain value. [+]: Increase the blue color temperature gain value. []: Initialize the blue color temperature gain value. Adjusts the red color temperature offset. [-]: Decrease the red color temperature offset value. [+]: Increase the red color temperature offset value. []: Initialize the red color temperature offset value. Adjusts the green color temperature offset. [-]: Decrease the green color temperature offset value. [+]: Increase the green color temperature offset value. []: Initialize the green color temperature offset value. Adjusts the blue color temperature offset. [-]: Decrease the blue color temperature offset value. [+]: Increase the blue color temperature offset value. []: Initialize the blue color temperature offset value. 24

25 [IMAGE] Tab Aspect Over Scan Position H Phase H Size Auto Adjust [INPUT] Tab Progressive Video NR 3D-YCS Color Space Component Video Format - Video Video Format S-Video HDMI M1-D Frame Lock Frame Lock - RGB1 Frame Lock-Computer1 Frame Lock - RGB2 Frame Lock-Computer2 Frame Lock - HDMI RGB in - RGB1 Computer in-1 Switches the mode for aspect ratio. 4:3 / 16:9 / 14:9 / Small / Normal Adjusts the over-scan ratio [-]: Decrease the over-scan value. [+]: Increase the over-scan value. Adjusts the display position. [ ]: Increase the vertical position value. [ ]: Decrease the vertical position value. [ ]: Increase the horizontal position value. [ ]: Decrease the horizontal position value. Adjusts the horizontal phase to eliminate flicker. [-]: Decrease the horizontal phase value. [+]: Increase the horizontal phase value. Adjusts the horizontal size. [-]: Decrease the horizontal size value. [+]: Increase the horizontal size value. [Execute]: Performs the automatic adjustment feature. Over Scan / V Position / H Position / H Size Switches the progress mode. Off / TV / Film Switches the noise reduction mode. Low / Mid / High Switches the 3D-YCS mode. Off / Movie / Still This function is not displayed for X62w / X64w. Switches the mode for color space. Auto / RGB / SMPTE240 / REC709 / REC601 Switches the function of the COMPONENT port. Component / Scart RGB Switches the mode for video format of the VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Switches the mode for video format of the S-VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Changes the HDMI signal mode. Auto / Normal / Enhanced This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w. Changes the M1-D signal mode. Normal / Enhanced This function is not displayed for PL95X / X62w / X64w / X95 / X95K / X95i / X95iK. Turns off/on the frame lock function. This function is not displayed for PL95X / X64w / X95 / X95K / X95i / X95iK. Turns the frame lock function off/on of the RGB IN1 port. This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w. Turns the frame lock function off/on of the COMPUTER IN1 port. This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Turns the frame lock function off/on of the RGB IN2 port. This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w. Turns the frame lock function off/on of the COMPUTER IN2 port. This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Turns the frame lock function off/on of the HDMI port. This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w. Selects the RGB input signal type of the RGB IN1 port. PL95X / X95 / X95K / X95i / X95iK Sync On G Off / Auto PL90X / X62w / X90 / X90K / X90w Sync On G Off / Sync On G On This function is not displayed for X64w. Selects the computer input signal type of the COMPUTER IN1 port. Sync On G Off / Sync On G On This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. 25

26 RGB in - RGB2 Computer in-2 [SETUP] Tab Auto Keystone Keystone V Keystone H Whisper Mirror Volume Speaker Audio RGB1 Audio-Computer1 Audio RGB2 Audio-Computer2 Audio Video Audio S-Video Audio Component Audio MIU Monitor Out-RGB1 Monitor Out-RGB2 Monitor Out-HDMI Monitor Out-Component Monitor Out-S-Video Selects the RGB input signal type of the RGB IN2 port. PL95X / X95 / X95K / X95i / X95iK Sync On G Off / Auto PL90X / X62w / X90 / X90K / X90w Sync On G Off / Sync On G On This function is not displayed for X64w. Selects the computer input signal type of the COMPUTER IN2 port. Sync On G Off / Sync On G On This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. [Execute]: Performs the automatic keystone distortion. Corrects the vertical keystone distortion. [-]: Decrease the vertical keystone value. [+]: Increase the vertical keystone value. Corrects the horizontal keystone distortion. [-]: Decrease the horizontal keystone value. [+]: Increase the horizontal keystone value. This function is not displayed for X62w / X64w. Turns off/on the whisper mode. Normal / Whisper Switches the mode for mirror status. Normal / H:Invert / V:Invert / H&V:Invert Adjusts the volume. [-]: Decrease the volume value. [+]: Increase the volume value. This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Turns off/on the built-in speaker. This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Assigns the audio port when the RGB IN1 input port is selected. Off / Audio1 / Audio2 / Audio3 This function is not displayed for PL90X / PL95X / X64w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Assigns the audio port when the COMPUTER IN1 input port is selected. Off / Audio1 / Audio2 / Audio3 This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Assigns the audio port when the RGB IN2 input port is selected. Off / Audio1 / Audio2 / Audio3 This function is not displayed for PL90X / PL95X / X64w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Assigns the audio port when the COMPUTER IN2 input port is selected. Off / Audio1 / Audio2 / Audio3 This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Assigns the audio port when the VIDEO input port is selected. Off / Audio1 / Audio2 / Audio3 This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Assigns the audio port when the S-VIDEO input port is selected. Off / Audio1 / Audio2 / Audio3 This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Assigns the audio port when the COMPONENT input port is selected. Off / Audio1 / Audio2 / Audio3 This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Assigns the audio port when the MIU input port is selected. Off / Audio1 / Audio2 / Audio3 / Audio MIU This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Assigns the MONITOR OUT when the RGB IN1 input port is selected. Off / RGB1 This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K. Assigns the MONITOR OUT when the RGB IN2 input port is selected. Off / RGB2 This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K. Assigns the MONITOR OUT when the HDMI input port is selected. Off / RGB1 / RGB2 This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K. Assigns the MONITOR OUT when the COMPONENT input port is selected. Off / RGB1 / RGB2 This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K. Assigns the MONITOR OUT when the S-VIDEO input port is selected. Off / RGB1 / RGB2 This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K. 26

27 Monitor Out-Video Monitor Out-MIU Monitor Out Standby Assigns the MONITOR OUT when the VIDEO input port is selected. Off / RGB1 / RGB2 This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K. Assigns the MONITOR OUT when the MIU input port is selected. Off / RGB1 / RGB2 This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K. Assigns the MONITOR OUT in the standby mode. Off / RGB1 / RGB2 This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K. X62w / X64w Keystone V PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK Keystone V / Keystone H [AUDIO] Tab This tab is displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK. Volume Adjusts the volume. [-]: Decrease the volume value. [+]: Increase the volume value. Treble Adjusts the treble level. [-]: Decrease the treble value. [+]: Increase the treble value. Bass Adjusts the bass level. [-]: Decrease the bass value. [+]: Increase the bass value. SRS WOW Switches the mode for SRS WOW mode. Off / Mid / High Speaker Turns off/on the built-in speaker. Audio - RGB1 Assigns the audio port when the RGB IN1 input port is selected. Off / Audio1 / Audio2 / Audio3 / Audio4 Audio - RGB2 Assigns the audio port when the RGB IN2 input port is selected. Off / Audio1 / Audio2 / Audio3 / Audio4 Audio - M1-D Assigns the audio port when the M1-D input port is selected. Off / Audio1 / Audio2 / Audio3 / Audio4 This function is not displayed for PL95X / X95 / X95K / X95i / X95iK. Audio - HDMI Assigns the audio port when the HDMI input port is selected. Off / Audio1 / Audio2 / Audio3 / Audio4 / Audio HDMI This function is not displayed for PL90X / X90 / X90K / X90w. Audio - Video Assigns the audio port when the VIDEO input port is selected. Off / Audio1 / Audio2 / Audio3 / Audio4 Audio - S-Video Assigns the audio port when the S-VIDEO input port is selected. Off / Audio1 / Audio2 / Audio3 / Audio4 Audio - Component Assigns the audio port when the COMPONENT input port is selected. Off / Audio1 / Audio2 / Audio3 / Audio4 Audio MIU Assigns the audio port when the MIU input port is selected. Off / Audio1 / Audio2 / Audio3 / Audio4 / Audio MIU This function is not displayed for PL90X / X90 / X90K. Audio Out Standby Assigns the audio port in the standby mode. Off / Audio1 / Audio2 / Audio3 / Audio4 This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K. HDMI Audio Switches the mode for the HDMI audio. 1 / 2 This function is not displayed for PL90X / X90 / X90K / X90w. 27

28 [SCREEN] Tab Language Menu Position Blank Start Up MyScreen Lock Message Template Switches the OSD (On Screen Display) language. English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese / Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese Adjusts the menu position. [ ]: Increase the vertical menu position value. [ ]: Decrease the vertical menu position value. [ ]: Decrease the horizontal menu position value. [ ]: Increase the horizontal menu position value. Switches the mode for the blank screen. Blue / White / Black / MyScreen / Original Switches the mode for the start-up screen. Original / Off / MyScreen Turns off/on the MyScreen lock function. Turns off/on the message function. Switches the mode for the template screen. Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K. Menu Position V / Menu Position H 28

29 [OPTION] Tab Auto Search Auto Keystone Auto On Auto Off My Button-1 My Button-2 My Source C.C. - Display C.C. - Mode C.C. - Channel Turns off/on the automatic signal search function. Turns off/on the automatic keystone function. Turns off/on the auto on function. Adjusts the time to count down to automatically turn the projector off. [-]: Decrease the auto power off time. [+]: Increase the auto power off time. Assigns the function for the MY BUTTON-1 button on the included remote control. X62w RGB1 / RGB2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / e-shot / Volume+ / Volume- X64w Computer1 / Computer2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / e-shot / Volume+ / Volume- / Live Mode / Thumbnail / Slide Show / Directory / Remove Media PL90X / X90 / X90K RGB1 / RGB2 / M1-D / Video / S-Video / Component / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / Active Iris / e-shot / Volume+ / Volume- X90w RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / Active Iris / e-shot / Volume+ / Volume- PL95X / X95 / X95K RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / Active Iris / e-shot / Volume+ / Volume- / AV Mute / Live Mode / Thumbnail / Slide Show / Directory / Remove Media X95i / X95iK RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / Active Iris / My Image / AV Mute / Template / Live Mode / Thumbnail / Slide Show / Directory / Remove Media / Other Assigns the function for the MY BUTTON-2 button on the included remote control. X62w RGB1 / RGB2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / e-shot / Volume+ / Volume- X64w Computer1 / Computer2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / e-shot / Volume+ / Volume- / Live Mode / Thumbnail / Slide Show / Directory / Remove Media PL90X / X90 / X90K RGB1 / RGB2 / M1-D / Video / S-Video / Component / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / Active Iris / e-shot / Volume+ / Volume- X90w RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / Active Iris / e-shot / Volume+ / Volume- PL95X / X95 / X95K RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / Active Iris / e-shot / Volume+ / Volume- / AV Mute / Live Mode / Thumbnail / Slide Show / Directory / Remove Media X95i / X95iK RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute / My Memory / Picture Mode / Filter / Active Iris / My Image / AV Mute / Template / Live Mode / Thumbnail / Slide Show / Directory / Remove Media / Other Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control. RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K. Selects the Closed Caption Display setting. / Auto This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K. Selects the Closed Caption Mode setting. Captions / Text This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K. Selects the Closed Caption Channel setting. 1 / 2 / 3 / 4 This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K. 29

30 Service Auto Adjust Remote Receiv. Remote Freq. - Normal Remote Freq. - High [OTHER] Tab Power Input Source Picture Mode Blank Mute Freeze Magnify e-shot My Image Selects the automatic adjustment mode. PL95X / X64w / X95 / X95K / X95i / X95iK Disable / Fast / Fine PL90X / X62w / X90 / X90K / X90w Disable / Enable Turns off/on the remote sensor. PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK Front () Rear () Top () This function is not displayed for X62w / X64w. Changes the projector s remote sensor off/on of the normal frequency. Disable / Enable Changes the projector s remote sensor off/on of the high frequency. Disable / Enable Turns off/on the power. Switches the input source. X62w RGB1 / RGB2 / Video / S-Video / Component / MIU X64w Computer1 / Computer2 / Video / S-Video / Component / MIU PL90X / X90 / X90K RGB1 / RGB2 / M1-D / Video / S-Video / Component X90w RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU PL95X / X95 / X95K / X95i / X95iK RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU Switches the picture mode. PL90X / X62w / X90 / X90K / X90w Normal / Cinema / Dynamic / Board(Black) / Board(Green) / White Board / Custom PL95X / X64w / X95 / X95K / X95i / X95iK Normal / Cinema / Dynamic / Board(Black) / Board(Green) / White Board / Daytime / Custom Custom is displayed only. It cannot be set. Turns off/on the blank. Turns off/on the mute. Turns off/on the freeze. Normal / Freeze Adjusts the magnify setting [-]: Decrease the magnify value. [+]: Increase the magnify value. Displays the e-shot data. Off / Image1 / Image2 / Image3 / Image4 This function is not displayed for X95i / X95iK. Displays the My Image data. Off / Image1 / Image2 / Image3 / Image4 This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K. 30

31 X30N / X35N / X35NK [STATUS] Tab Power Input Source Error Status Blank On/Off Mute Freeze Lamp Time Filter Time [PICTURE] Tab Brightness Contrast Gamma Color Temp Color Tint Sharpness Active Iris My Memory Displays the current power status. On / Standby / Cool down Displays the current input source. Computer in1 / Computer in2 / Component / S-Video / Video Displays the current error status. Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error / Other Error Displays the current blank on/off status. Displays the current mute status. Displays the current freeze status. Normal / Freeze Displays the usage time for the current lamp. Displays the usage time for the current filter. Lamp Time / Filter Time Adjusts the brightness. [-]: Decrease the brightness value. [+]: Increase the brightness value. Adjusts the contrast. [-]: Decrease the contrast value. [+]: Increase the contrast value. Switches the gamma mode. #1 Custom / #2 Custom / #3 Custom / #4 Custom / #5 Custom / #6 Custom / #1 Default / #2 Default / #3 Default / #4 Default / #5 Default / #6 Default / Switches the color temperature mode. High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / #1 Custom / #2 Custom / #3 Custom / #4 Custom / #5 Custom / #6 Custom Adjusts the strength of whole color. [-]: Decrease the color value. [+]: Increase the color value Adjusts the tint. [-]: Decrease the tint value. [+]: Increase the tint value. Adjusts the sharpness. [-]: Decrease the sharpness value. [+]: Increase the sharpness value. Changes the active iris control mode. Presentation / Theater / Off Loads the data from the memory. Load1 / Load2 / Load3 / Load4 Saves the current adjustment data into the memory. Save1 / Save2 / Save3 / Save4 [Execute]: Performs each function. Initialize the selected function Brightness / Contrast / Color / Tint / Sharpness 31

32 Gamma - Custom - User Gamma Pattern Changes the test pattern. Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp User Gamma Point 1 Adjusts the user gamma point 1. [-]: Decrease the user gamma point 1 value. [+]: Increase the user gamma point 1 value. []: Initialize the user gamma point 1 value. User Gamma Point 2 Adjusts the user gamma point 2. [-]: Decrease the user gamma point 2 value. [+]: Increase the user gamma point 2 value. []: Initialize the user gamma point 2 value. User Gamma Point 3 Adjusts the user gamma point 3. [-]: Decrease the user gamma point 3 value. [+]: Increase the user gamma point 3 value. []: Initialize the user gamma point 3 value. User Gamma Point 4 Adjusts the user gamma point 4. [-]: Decrease the user gamma point 4 value. [+]: Increase the user gamma point 4 value. []: Initialize the user gamma point 4 value. User Gamma Point 5 Adjusts the user gamma point 5. [-]: Decrease the user gamma point 5 value. [+]: Increase the user gamma point 5 value. []: Initialize the user gamma point 5 value. User Gamma Point 6 Adjusts the user gamma point 6. [-]: Decrease the user gamma point 6 value. [+]: Increase the user gamma point 6 value. []: Initialize the user gamma point 6 value. User Gamma Point 7 Adjusts the user gamma point 7. [-]: Decrease the user gamma point 7 value. [+]: Increase the user gamma point 7 value. []: Initialize the user gamma point 7 value. User Gamma Point 8 Adjusts the user gamma point 8. [-]: Decrease the user gamma point 8 value. [+]: Increase the user gamma point 8 value. []: Initialize the user gamma point 8 value. Color Temp - Custom - User Gamma Pattern Color Temp Gain R Color Temp Gain G Color Temp Gain B Color Temp Offset R Color Temp Offset G Color Temp Offset B Changes the test pattern. Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp Adjusts the red color temperature gain. [-]: Decrease the red color temperature gain value. [+]: Increase the red color temperature gain value. []: Initialize the red color temperature gain value. Adjusts the green color temperature gain. [-]: Decrease the green color temperature gain value. [+]: Increase the green color temperature gain value. []: Initialize the green color temperature gain value. Adjusts the blue color temperature gain. [-]: Decrease the blue color temperature gain value. [+]: Increase the blue color temperature gain value. []: Initialize the blue color temperature gain value. Adjusts the red color temperature offset. [-]: Decrease the red color temperature offset value. [+]: Increase the red color temperature offset value. []: Initialize the red color temperature offset value. Adjusts the green color temperature offset. [-]: Decrease the green color temperature offset value. [+]: Increase the green color temperature offset value. []: Initialize the green color temperature offset value. Adjusts the blue color temperature offset. [-]: Decrease the blue color temperature offset value. [+]: Increase the blue color temperature offset value. []: Initialize the blue color temperature offset value. 32

33 [IMAGE] Tab Aspect Over Scan Position H Phase H Size Auto Adjust [INPUT] Tab Progressive Video NR Color Space Component S-Video Format C-Video Format Frame Lock - Computer in1 Frame Lock - Computer in2 Computer in1 Computer in2 [SETUP] Tab Auto Keystone Keystone V Eco Mode Mirror Standby Mode Monitor Out - Computer in1 Monitor Out - Computer in2 Monitor Out - Component Monitor Out - S-Video Monitor Out - Video Monitor Out - Standby Switches the mode for aspect ratio. Normal / 4:3 / 16:9 / 16:10 / 14:9 Adjusts the over-scan ratio. [-]: Decrease the over scan value. [+]: Increase the over scan value. Adjusts the display position. [ ]: Increase the vertical position value. [ ]: Decrease the vertical position value. [ ]: Increase the horizontal position value. [ ]: Decrease the horizontal position value. Adjusts the horizontal phase to eliminate flicker. [-]: Decrease the horizontal phase value. [+]: Increase the horizontal phase value. Adjusts the horizontal size. [-]: Decrease the horizontal size value. [+]: Increase the horizontal size value. [Execute]: Performs the automatic adjustment feature. Over Scan / V Position / H Position / H Size Switches the progress mode. TV / FILM / Off Switches the noise reduction mode. High / Mid / Low Switches the mode for color space. Auto / RGB / SMPTE240 / REC709 / REC601 Switches the function of the COMPONENT port. Component / Scart RGB Switches the mode for video format of the S-VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Switches the mode for video format of the VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Selects the frame lock function on/off of the COMPUTER IN1 port. Selects the frame lock function on/off of the COMPUTER IN2 port. Selects the computer input signal type of the COMPUTER IN1 port. Auto / Sync On G Off Selects the computer input signal type of the COMPUTER IN2 port. Auto / Sync On G Off [Execute]: Performs the automatic keystone distortion correction. Corrects the vertical keystone distortion. [-]: Decrease the vertical keystone value. [+]: Increase the vertical keystone value. Turns off/on the eco mode. Normal / Eco Switches the mode for mirror status. Normal / H:Invert / V:Invert / H&V:Invert Switches the standby mode setting. Normal / Saving Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected. Computer in1 / Off Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected. Computer in2 / Off Assigns the MONITOR OUT when the COMPONENT input port is selected. Assigns the MONITOR OUT when the S-VIDEO input port is selected. Assigns the MONITOR OUT when the VIDEO input port is selected. Assigns the MONITOR OUT in the standby mode. Keystone V 33

34 [AUDIO] Tab Volume Speaker Audio Source - Computer in1 Audio Source - Computer in2 Audio Source - Component Audio Source - S-Video Audio Source - Video Audio Out Standby [SCREEN] Tab Language Menu Position Blank Start Up MyScreen Lock Message Template C.C. - Display C.C. Mode C.C. - Channel [OPTION] Tab Auto Search Auto Keystone Direct On Auto Off My Button-1 My Button-2 My Source Adjusts the volume. [-]: Decrease the volume value. [+]: Increase the volume value. Turns on/off the built-in speaker. Assigns the audio port when the COMPUTER IN1 input port is selected. Off / Audio1 / Audio2 / Audio3 Assigns the audio port when the COMPUTER IN2 input port is selected. Off / Audio1 / Audio2 / Audio3 Assigns the audio port when the COMPONENT input port is selected. Off / Audio1 / Audio2 / Audio3 Assigns the audio port when the S-VIDEO input port is selected. Off / Audio1 / Audio2 / Audio3 Assigns the audio port when the VIDEO input port is selected. Off / Audio1 / Audio2 / Audio3 Assigns the audio port in the standby mode. Off / Audio1 / Audio2 / Audio3 Switches the OSD (On Screen Display) language. English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese / Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese Adjusts the menu position. [ ]: Increase the vertical menu position value. [ ]: Decrease the vertical menu position value. [ ]: Decrease the horizontal menu position value. [ ]: Increase the horizontal menu position value. Switches the mode for the blank screen. MyScreen / Original / Blue / White / Black Switches the mode for the start-up screen. MyScreen / Original / Off Turns on/off the MyScreen lock function. Turns on/off the message function. Switches the mode for the template screen. Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 Selects the Closed Caption Display setting. Auto / Selects the Closed Caption Mode setting. Captions / Text Selects the Closed Caption Channel setting. 1 / 2 / 3 / 4 Menu Position V / Menu Position H Turns on/off the automatic signal search function. Turns on/off the automatic keystone function. Turns on/off the direct on function. Adjusts the time to count down to automatically turn the projector off. [-]: Decrease the auto power off time. [+]: Increase the auto power off time. Assigns the function for the MY BUTTON-1 button on the included remote control. Computer in1 / Computer in2 / Component / S-Video / Video / Information / Auto Keystone Execute / My Memory / Active Iris / Picture Mode / Filter / Template / AV Mute / My Image / Messenger / Other Assigns the function for the MY BUTTON-2 button on the included remote control. Computer in1 / Computer in2 / Component / S-Video / Video / Information / Auto Keystone Execute / My Memory / Active Iris / Picture Mode / Filter / Template / AV Mute / My Image / Messenger / Other Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control. Computer in1 / Computer in2 / Component / S-Video / Video 34

35 Service Remote Frequency - Normal Remote Frequency - High [OTHER] Tab Power Input Source Picture Mode Blank On/Off Mute Freeze Template On/Off Magnify My Image My Image Delete Changes the projector s remote sensor off/on of the normal frequency. Disable / Enable Changes the projector s remote sensor off/on of the high frequency. Disable / Enable Turns on/off the power. Switches the input source. Computer in1 / Computer in2 / Component / S-Video / Video Switches the picture mode. Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom Custom is displayed only. It cannot be set. Turns on/off the blank. Turns on/off the mute. Turns off/on the freeze. Normal / Freeze Turns on/off the template screen. Adjusts the magnify setting. [-]: Decrease the magnify value. [+]: Increase the magnify value. Displays the My Image data. Off / Image-1 / Image-2 / Image-3 / Image-4 Deletes the My Image data. Image-1 / Image-2 / Image-3 / Image-4 35

36 CL67N / CL69N / PL92X / WX36 / X31 / X36 / X46 [STATUS] Tab Power Input Source Error Status Blank On/Off Mute Freeze Lamp Time Filter Time [PICTURE] Tab Brightness Contrast Gamma Color Temp Color Tint Sharpness Active Iris My Memory Displays the current power status. On / Standby / Cool down Displays the current input source. Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video / Video Displays the current error status. Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error / Other Error Displays the current blank on/off status. Displays the current mute status. Displays the current freeze status. Normal / Freeze Displays the usage time for the current lamp. Displays the usage time for the current filter. Lamp Time / Filter Time Adjusts the brightness. [-]: Decrease the brightness value. [+]: Increase the brightness value. Adjusts the contrast. [-]: Decrease the contrast value. [+]: Increase the contrast value. Switches the gamma mode. Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 / Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 / Switches the color temperature mode. High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 Adjusts the strength of whole color. [-]: Decrease the color value. [+]: Increase the color value Adjusts the tint. [-]: Decrease the tint value. [+]: Increase the tint value. Adjusts the sharpness. [-]: Decrease the sharpness value. [+]: Increase the sharpness value. Changes the active Iris control mode. Presentation / Theater / Off Loads the data from the memory. Load-1 / Load-2 / Load-3 / Load-4 Saves the current adjustment data into the memory. Save-1 / Save-2 / Save-3 / Save-4 [Execute]: Performs each function. Initialize the selected function Brightness / Contrast / Color / Tint / Sharpness 36

37 Gamma - Custom - Test Pattern Changes the test pattern. Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp Gamma Point 1 Adjusts the user gamma point 1. [-]: Decrease the user gamma point 1 value. [+]: Increase the user gamma point 1 value. []: Initialize the user gamma point 1 value. Gamma Point 2 Adjusts the user gamma point 2. [-]: Decrease the user gamma point 2 value. [+]: Increase the user gamma point 2 value. []: Initialize the user gamma point 2 value. Gamma Point 3 Adjusts the user gamma point 3. [-]: Decrease the user gamma point 3 value. [+]: Increase the user gamma point 3 value. []: Initialize the user gamma point 3 value. Gamma Point 4 Adjusts the user gamma point 4. [-]: Decrease the user gamma point 4 value. [+]: Increase the user gamma point 4 value. []: Initialize the user gamma point 4 value. Gamma Point 5 Adjusts the user gamma point 5. [-]: Decrease the user gamma point 5 value. [+]: Increase the user gamma point 5 value. []: Initialize the user gamma point 5 value. Gamma Point 6 Adjusts the user gamma point 6. [-]: Decrease the user gamma point 6 value. [+]: Increase the user gamma point 6 value. []: Initialize the user gamma point 6 value. Gamma Point 7 Adjusts the user gamma point 7. [-]: Decrease the user gamma point 7 value. [+]: Increase the user gamma point 7 value. []: Initialize the user gamma point 7 value. Gamma Point 8 Adjusts the user gamma point 8. [-]: Decrease the user gamma point 8 value. [+]: Increase the user gamma point 8 value. []: Initialize the user gamma point 8 value. Color Temp - Custom - Test Pattern Color Temp Gain R Color Temp Gain G Color Temp Gain B Color Temp Offset R Color Temp Offset G Color Temp Offset B Changes the test pattern. Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp Adjusts the red color temperature gain. [-]: Decrease the red color temperature gain value. [+]: Increase the red color temperature gain value. []: Initialize the red color temperature gain value. Adjusts the green color temperature gain. [-]: Decrease the green color temperature gain value. [+]: Increase the green color temperature gain value. []: Initialize the green color temperature gain value. Adjusts the blue color temperature gain. [-]: Decrease the blue color temperature gain value. [+]: Increase the blue color temperature gain value. []: Initialize the blue color temperature gain value. Adjusts the red color temperature offset. [-]: Decrease the red color temperature offset value. [+]: Increase the red color temperature offset value. []: Initialize the red color temperature offset value. Adjusts the green color temperature offset. [-]: Decrease the green color temperature offset value. [+]: Increase the green color temperature offset value. []: Initialize the green color temperature offset value. Adjusts the blue color temperature offset. [-]: Decrease the blue color temperature offset value. [+]: Increase the blue color temperature offset value. []: Initialize the blue color temperature offset value. 37

38 [IMAGE] Tab Aspect Over Scan Position H Phase H Size Auto Adjust [INPUT] Tab Progressive Video NR Color Space Component S-Video Format C-Video Format HDMI Format HDMI Range Computer in1 Computer in2 Frame Lock - Computer in1 Frame Lock - Computer in2 Frame Lock - HDMI Switches the mode for aspect ratio. CL67N / CL69N / PL92X / X31 / X36 / X46 Normal / 4:3 / 16:9 / 16:10 / 14:9 WX36 Normal / 4:3 / 16:9 / 16:10 / 14:9 / Native Adjusts the over-scan ratio [-]: Decrease the over-scan value. [+]: Increase the over-scan value. Adjusts the display position. [ ]: Increase the vertical position value. [ ]: Decrease the vertical position value. [ ]: Increase the horizontal position value. [ ]: Decrease the horizontal position value. Adjusts the horizontal phase to eliminate flicker. [-]: Decrease the horizontal phase value. [+]: Increase the horizontal phase value. Adjusts the horizontal size. [-]: Decrease the horizontal size value. [+]: Increase the horizontal size value. [Execute]: Performs the automatic adjustment feature. Over Scan / V Position / H Position / H Size Switches the progress mode. TV / FILM / Off Switches the noise reduction mode. High / Mid / Low Switches the mode for color space. Auto / RGB / SMPTE240 / REC709 / REC601 Switches the function of the COMPONENT port. Component / Scart RGB Switches the mode for video format of the S-VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Switches the mode for video format of the VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Switches the video format for an input from the HDMI port. Auto / Video / Computer Changes the digital range for input from the HDMI port. Auto / Normal / Enhanced Selects the computer input signal type of the COMPUTER IN1 port. Auto / Sync On G Off Selects the computer input signal type of the COMPUTER IN2 port. Auto / Sync On G Off Selects the frame lock function on/off of the COMPUTER IN1 port. Selects the frame lock function on/off of the COMPUTER IN2 port. Selects the frame lock function on/off of the HDMI port. 38

39 [SETUP] Tab Auto Keystone Keystone V Auto Eco Mode Eco Mode Mirror Standby Mode Monitor Out - Computer in1 Monitor Out - Computer in2 Monitor Out - LAN Monitor Out - USB TYPE A Monitor Out - USB TYPE B Monitor Out - HDMI Monitor Out - Component Monitor Out - S-Video Monitor Out - Video Monitor Out - Standby [AUDIO] Tab Volume Speaker Mic Level Mic Volume Audio Source - Computer in1 Audio Source - Computer in2 Audio Source - LAN Audio Source - USB TYPE A Audio Source - USB TYPE B Audio Source - HDMI Audio Source - Component Audio Source - S-Video Audio Source - Video Audio Source - Standby HDMI Audio [Execute]: Performs the automatic keystone distortion correction. Adjusts the vertical keystone distortion [-]: Decrease the vertical keystone value. [+]: Increase the vertical keystone value. Turns on/off the auto eco mode. Turns off/on the eco mode. Normal / Eco Switches the mode for mirror status. Normal / H:Invert / V:Invert / H&V:Invert Switches the standby mode setting. Normal / Saving Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected. Computer in1 / Off Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected. Computer in2 / Off Assigns the MONITOR OUT when the LAN input port is selected. Assigns the MONITOR OUT when the USB TYPE A input port is selected. Assigns the MONITOR OUT when the USB TYPE B input port is selected. Assigns the MONITOR OUT when the HDMI input port is selected. Assigns the MONITOR OUT when the COMPONENT input port is selected. Assigns the MONITOR OUT when the S-VIDEO input port is selected. Assigns the MONITOR OUT when the VIDEO input port is selected. Assigns the MONITOR OUT in the standby mode. Keystone V Adjusts the volume. [-]: Decrease the volume value. [+]: Increase the volume value. Turns on/off the built-in speaker. Switches the input level to match that of the microphone connected to the MIC port. High / Low Adjusts the volume of the microphone connected to the MIC port. [-]: Decrease the volume of the microphone. [+]: Increase the volume of the mocrophone. Assigns the audio port when the COMPUTER IN1 input port is selected. Off / Audio in1 / Audio in2 / Audio in3 Assigns the audio port when the COMPUTER IN2 input port is selected. Off / Audio in1 / Audio in2 / Audio in3 Assigns the audio port when the LAN input port is selected. Off / Audio in1 / Audio in2 / Audio in3 Assigns the audio port when the USB TYPE A input port is selected. Off / Audio in1 / Audio in2 / Audio in3 Assigns the audio port when the USB TYPE B input port is selected. Off / Audio in1 / Audio in2 / Audio in3 Assigns the audio port when the HDMI input port is selected. Off / Audio in1 / Audio in2 / Audio in3 / Audio HDMI Assigns the audio port when the COMPONENT input port is selected. Off / Audio in1 / Audio in2 / Audio in3 Assigns the audio port when the S-VIDEO input port is selected. Off / Audio in1 / Audio in2 / Audio in3 Assigns the audio port when the VIDEO input port is selected. Off / Audio in1 / Audio in2 / Audio in3 Assigns the audio port in the standby mode. Off / Audio in1 / Audio in2 / Audio in3 Switches the mode for the HDMI audio. 1 / 2 39

40 [SCREEN] Tab Language Menu Position Blank Start Up MyScreen Lock Message Template C.C. Display C.C. Mode C.C. Channel [OPTION] Tab Auto Search Auto Keystone Direct Power On Auto Power Off USB TYPE B My Button-1 My Button-2 My Source Service Remote Freq. - Normal Remote Freq. - High Switches the OSD (On Screen Display) language. English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese / Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese Adjusts the menu position. [ ]: Increase the vertical menu position value. [ ]: Decrease the vertical menu position value. [ ]: Decrease the horizontal menu position value. [ ]: Increase the horizontal menu position value. Switches the mode for the blank screen. MyScreen / Original / Blue / White / Black Switches the mode for thr start-up screen. MyScreen / Original / Off Turns on/off the MyScreen lock function. Turns on/off the message function. Switches the mode for the template screen. Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2 Selects the Closed Caption Display setting. Auto / Selects the Closed Caption Mode setting. Captions / Text Selects the Closed Caption Channel setting. 1 / 2 / 3 / 4 Menu Position V / Menu Position H Turns on/off the automatic signal search function. Turns on/off the automatic keystone function. Turns on/off direct power on function. Adjusts the time to count down to automatically turn the projector off. [-]: Decrease the auto power off time. [+]: Increase the auto power off time. Selects the function of USB TYPE B port. Mouse / USB Display Assigns the function for the MY BUTTON-1 button on the included remote control. Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video / Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris / Picture Mode / Filter / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other Assigns the function for the MY BUTTON-2 button on the included remote control. Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video / Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris / Picture Mode / Filter / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control.. Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video / Video Changes the projector s remote sensor off/on of the normal frequency. Disable / Enable Changes the projector s remote sensor off/on of the high frequency. Disable / Enable 40

41 [OTHER] Tab Power Input Source Picture Mode Blank On/Off Mute Freeze Magnify Magnify Position Template On/Off My Image My Image Delete Messenger Turns on/off the power. Switches the input source. Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video / Video Switches the picture mode. Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom Custom is displayed only. It cannot be set. Turns on/off the blank. Turns on/off the mute. Turns on/off the freeze. Adjusts the magnify setting. [-]: Decrease the magnify value. [+]: Increase the magnify value. Adjusts the magnify position. [ ]: Decrease the vertical magnify position value. [ ]: Increase the vertical magnify position value. [ ]: Decrease the horizontal magnify position value. [ ]: Increase the horizontal magnify position value. Turns on/off the template screen. Displays the My Image data. Image-Off / Image-1 / Image-2 / Image-3 / Image-4 Deletes the My Image data. Image-1 / Image-2 / Image-3 / Image-4 Displays the Messenger. Message-Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 / Message-6 / Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12 41

42 CL86X / PL96X / X56 [STATUS] Tab Power Input Source Error Status Blank On/Off Mute Freeze Lamp Time Filter Time Stack Mode [PICTURE] Tab Brightness Contrast Gamma Color Temp Color Tint Sharpness Active Iris My Memory Displays the current power status. On / Standby / Cool down Displays the current Input source. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video / Video Displays the current error status. Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error / Other Error Displays the current blank on/off status. Displays the current mute status. Displays the current freeze status. Normal / Freeze Displays the usage time for the current lamp. Displays the usage time for the current filter. Displays the stack mode status. Main / Sub This item is not displayed when stack mode status is off. Lamp Time / Filter Time Adjusts the brightness. [-]: Decrease the brightness value. [+]: Increase the brightness value. Adjusts the contrast. [-]: Decrease the contrast value. [+]: Increase the contrast value. Switches the gamma mode. Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 / Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 Switches the color temperature mode. High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 Adjusts the strength of whole color. [-]: Decrease the color value. [+]: Increase the color value Adjusts the tint. [-]: Decrease the tint value. [+]: Increase the tint value. Adjusts the sharpness. [-]: Decrease the sharpness value. [+]: Increase the sharpness value. Changes the active iris control mode. Presentation / Theater / Off Saves the current adjustment data into the memory. Save-1 / Save-2 / Save-3 / Save-4 Loads the data from the memory. Load-1 / Load-2 / Load-3 / Load-4 [Execute]: Performs each function. Brightness / Contrast / Color / Tint / Sharpness 42

43 Gamma - Custom - Test Pattern Changes the test pattern. Off / 9 steps Gray scale / 15 steps Gray scale / Ramp Gamma Point 1 Adjusts the user gamma point 1. [-]: Decrease the user gamma point 1 value. [+]: Increase the user gamma point 1 value. []: Initialize the user gamma point 1 value. Gamma Point 2 Adjusts the user gamma point 2. [-]: Decrease the user gamma point 2 value. [+]: Increase the user gamma point 2 value. []: Initialize the user gamma point 2 value. Gamma Point 3 Adjusts the user gamma point 3. [-]: Decrease the user gamma point 3 value. [+]: Increase the user gamma point 3 value. []: Initialize the user gamma point 3 value. Gamma Point 4 Adjusts the user gamma point 4. [-]: Decrease the user gamma point 4 value. [+]: Increase the user gamma point 4 value. []: Initialize the user gamma point 4 value. Gamma Point 5 Setting the user gamma point 5. [-]: Decrease the user gamma point 5 value. [+]: Increase the user gamma point 5 value. []: Initialize the user gamma point 5 value. Gamma Point 6 Setting the user gamma point 6. [-]: Decrease the user gamma point 6 value. [+]: Increase the user gamma point 6 value. []: Initialize the user gamma point 6 value. Gamma Point 7 Setting the user gamma point 7. [-]: Decrease the user gamma point 7 value. [+]: Increase the user gamma point 7 value. []: Initialize the user gamma point 7 value. Gamma Point 8 Setting the user gamma point 8. [-]: Decrease the user gamma point 8 value. [+]: Increase the user gamma point 8 value. []: Initialize the user gamma point 8 value. Color Temp - Custom - Test Pattern Color Temp Gain R Color Temp Gain G Color Temp Gain B Color Temp Offset R Color Temp Offset G Color Temp Offset B Changes the test pattern. Off / 9 steps Gray scale / 15 steps Gray scale / Ramp Adjusts the red color temperature gain. [-]: Decrease the red color temp gain value. [+]: Increase the red color temp gain value. []: Initialize the red color temp gain value. Adjusts the green color temperature gain. [-]: Decrease the green color temp gain value. [+]: Increase the green color temp gain value. []: Initialize the green color temp gain value. Adjusts the blue color temperature gain. [-]: Decrease the blue color temp gain value. [+]: Increase the blue color temp gain value. []: Initialize the blue color temp gain value. Adjusts the red color temperature offset. [-]: Decrease the red color temp offset value. [+]: Increase the red color temp offset value. []: Initialize the red color temp offset value. Adjusts the green color temperature offset. [-]: Decrease the green color temp offset value. [+]: Increase the green color temp offset value. []: Initialize the green color temp offset value. Adjusts the blue color temperature offset. [-]: Decrease the blue color temp offset value. [+]: Increase the blue color temp offset value. []: Initialize the blue color temp offset value. 43

44 [IMAGE] Tab Aspect Over Scan Position H Phase H Size Auto Adjust [INPUT] Tab Progressive Video NR Color Space Component Video Format - S-Video Video Format - Video HDMI Format HDMI Range Computer in - Computer in1 Computer in - Computer in2 Frame Lock - Computer in1 Frame Lock - Computer in2 Frame Lock - HDMI Switches the mode for aspect ratio. Normal / 4:3 / 16:9 / 16:10 / 14:9 Adjusts the over-scan ratio. [-]: Decrease the over scan value. [+]: Increase the over scan value. Adjusts the display position. [ ]: Increase the vertical position value. [ ]: Decrease the vertical position value. [ ]: Increase the horizontal position value. [ ]: Decrease the horizontal position value. Adjusts the horizontal phase to eliminate flicker. [-]: Decrease the horizontal phase value. [+]: Increase the horizontal phase value. Adjusts the horizontal size. [-]: Decrease the horizontal size value. [+]: Increase the horizontal size value. [Execute]: Performs the automatic adjustment feature. Over Scan / V Position / H Position / H Size Switches the progress mode. TV / Film / Off Switches the noise reduction mode. High / Mid / Low Switches the mode for color space. Auto / RGB / SMPTE240 / REC709 / REC601 Switches the function of the COMPONENT port. Component / Scart RGB Switches the mode for video format of the S-VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Switches the mode for video format of the VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Switches the video format for an input from the HDMI port. Auto / Video / Computer Changes the digital range for an input from the HDMI port. Auto / Normal / Enhanced Selects the computer input signal type of the COMPUTER IN1 port. Auto / Sync On G Off Selects the computer input signal type of the COMPUTER IN2 port. Auto / Sync On G Off Selects the frame lock function on/off of the COMPUTER IN1 port. Selects the frame lock function on/off of the COMPUTER IN2 port. Selects the frame lock function on/off of the HDMI port. 44

45 [SETUP] Tab Auto Keystone Keystone V Keystone H Perfect Fit Auto Eco Mode Eco Mode Mirror Standby Mode Monitor Out - Computer in1 Monitor Out - Computer in2 Monitor Out - LAN Monitor Out - USB type A Monitor Out - USB type B Monitor Out - HDMI Monitor Out - Component Monitor Out - S-Video Monitor Out - Video Monitor Out - Standby [Execute]: Performs the automatic keystone distortion correction. Corrects the vertical keystone distortion. [-]: Decrease the vertical keystone value. [+]: Increase the vertical keystone value. Corrects the horizontal keystone distortion. [-]: Decrease the horizontal keystone value. [+]: Increase the horizontal keystone value. [Settings...]: Displays the Perfect Fit dialog. Turns on/off the auto eco mode. Turns off/on the eco mode. Normal / Eco Switches the mode for mirror status. Normal / H:Invert / V:Invert / H&V:Invert Switches the standby mode setting. Normal / Saving Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected. Computer in1 / Off Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected. Computer in2 / Off Assigns the MONITOR OUT when the LAN input port is selected. Assigns the MONITOR OUT when the USB TYPE A input port is selected. Assigns the MONITOR OUT when the USB TYPE B input port is selected. Assigns the MONITOR OUT when the HDMI input port is selected. Assigns the MONITOR OUT when the COMPONENT input port is selected. Assigns the MONITOR OUT when the S-VIDEO input port is selected. Assigns the MONITOR OUT when the VIDEO input port is selected. Assigns the MONITOR OUT in the standby mode. Keystone V / Keystone H 45

46 Perfect Fit Perfect Fit Corner Position Left Top V Left Top H Left Bottom V Left Bottom H Right Top V Right Top H Right Bottom V Right Bottom H Line Distortion Left Distortion Right Distortion Distortion Position V Top Distortion Bottom Distortion Distortion Position H Selects the perfect fit enable setting. Enable / Disable Adjusts the shape of the projected image in left top corner. [-]: Decrease the vertical value. [+]: Increase the vertical value. Adjusts the shape of the projected image in left top corner. [-]: Decrease the horizontal value. [+]: Increase the horizontal value. Adjusts the shape of the projected image in left bottom corner. [-]: Decrease the vertical value. [+]: Increase the vertical value. Adjusts the shape of the projected image in left bottom corner. [-]: Decrease the horizontal value. [+]: Increase the horizontal value. Adjusts the shape of the projected image in right top corner. [-]: Decrease the vertical value. [+]: Increase the vertical value. Adjusts the shape of the projected image in right top corner. [-]: Decrease the horizontal value. [+]: Increase the horizontal value. Adjusts the shape of the projected image in right bottom corner. [-]: Decrease the vertical value. [+]: Increase the vertical value. Adjusts the shape of the projected image in right bottom corner. [-]: Decrease the horizontal value. [+]: Increase the horizontal value. Adjusts the shape of the projected image in left side distortion. [-]: Decrease the left side distortion value. [+]: Increase the left side distortion value. Adjusts the shape of the projected image in right side distortion. [-]: Decrease the right side distortion value. [+]: Increase the right side distortion value. Adjusts the vertical distortion position. [-]: Decrease the vertical distortion position value. [+]: Increase the vertical distortion position value. Adjusts the shape of the projected image in top side distortion. [-]: Decrease the top side distortion value. [+]: Increase the top side distortion value. Adjusts the shape of the projected image in bottom side distortion. [-]: Decrease the bottom side distortion value. [+]: Increase the bottom side distortion value. Adjusts the horizontal distortion position. [-]: Decrease the horizontal distortion position value. [+]: Increase the horizontal distortion position value. After the confirmation message, the Perfect Fit function will be initialized. 46

47 [AUDIO] Tab Volume Speaker Mic Level Mic Volume Audio Source - Computer in1 Audio Source - Computer in2 Audio Source - LAN Audio Source - USB type A Audio Source - USB type B Audio Source - HDMI Audio Source - Component Audio Source - S-Video Audio Source - Video Audio Source - Standby HDMI Audio [SCREEN] Tab Language Menu Position Blank Start Up MyScreen Lock Message Template C.C. Display C.C. Mode C.C. - Channel Adjusts the volume. [-]: Decrease the volume value. [+]: Increase the volume value. Turns on/off the built-in speaker. Switches the input level to match that of the microphone connected to the MIC port. High / Low Adjusts the volume of the microphone connected to the MIC port. [-]: Decrease the volume of the microphone. [+]: Increase the volume of the microphone. Assigns the audio port when the COMPUTER IN1 input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the audio port when the COMPUTER IN2 input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the audio port when the LAN input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the audio port when the USB TYPE A input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the audio port when the USB TYPE B input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the audio port when the HDMI input port is selected. Audio HDMI / Audio in1 / Audio in2 / Audio in3 / Off Assigns the audio port when the COMPONENT input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the audio port when the S-VIDEO input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the audio port when the VIDEO input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the audio port in the standby mode. Audio in1 / Audio in2 / Audio in3 / Off Switches the mode for the HDMI audio. 1 / 2 Switches the OSD (On Screen Display) language. English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese / Simplified Chinese / Traditional Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish Adjusts the menu position. [ ]: Increase the vertical menu position value. [ ]: Decrease the vertical menu position value. [ ]: Decrease the horizontal menu position value. [ ]: Increase the horizontal menu position value. Switches the mode for the blank screen. MyScreen / Original / Blue / White / Black Switches the mode for the start-up screen. MyScreen / Original / Off Turns on/off the MyScreen lock function. Turns on/off the message function. Switches the mode for the template screen. Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2 / Stack Selects the Closed Caption Display setting. Auto / Selects the Closed Caption Mode setting. Captions / Text Selects the Closed Caption Channel setting. 1 / 2 / 3 / 4 Menu Position V / Menu Position H 47

48 [OPTION] Tab Auto Search Auto Keystone Direct Power On Auto Power Off USB type B My Button-1 My Button-2 My Source Service Remote Freq. - Normal Remote Freq. - High [OTHER] Tab Power Input Source Picture Mode Blank On/Off Mute Freeze Magnify Magnify Position Template My Image My Image Delete Messenger Turns on/off the automatic signal search function. Turns on/off the automatic keystone function. Turns on/off the Direct Power On function. Adjusts the time to count down to automatically turn the projector off. [-]: Decrease the Auto Power off time. [+]: Increase the Auto Power off time. Selects the function of USB TYPE B port. Mouse / USB Display Assigns the function for the MY BUTTON-1 button on the included remote control. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video / Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris / Picture Mode / Filter / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other Assigns the function for the MY BUTTON-2 button on the included remote control. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video / Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris / Picture Mode / Filter / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video / Video Changes the projector s remote sensor on/off of the normal frequency. Enable / Disable Changes the projector s remote sensor on/off of the high frequency. Enable / Disable Turns on/off the power. Switches the input source. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video / Video Switches the picture mode. Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom Custom is displayed only. It cannot be set. Turns on/off the blank. Turns on/off the mute. Turns off/on the freeze. Normal / Freeze Adjusts the magnify setting. [-]: Decrease the magnify value. [+]: Increase the magnify value. Adjusts the magnify position. [ ]: Decrease the vertical magnify position value. [ ]: Increase the vertical magnify position value. [ ]: Decrease the horizontal magnify position value. [ ]: Increase the horizontal magnify position value. Turns on/off the template screen. Displays the My Image data. Image-Off / Image-1 / Image-2 / Image-3 / Image-4 Deletes the My Image data. Image-1 / Image-2 / Image-3 / Image-4 Displays the Messenger. Message-Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 / Message-6 / Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12 48

49 CL33X / CL35X / X21i / X26i [STATUS] Tab Power Input Source Error Status Blank On/Off Mute Freeze Lamp Time Filter Time [PICTURE] Tab Brightness Contrast Gamma Color Temp Color Tint Sharpness My Memory Displays the current power status. On / Standby / Cool down Displays the current Input source. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video Displays the current error status. Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error / Other Error Displays the current blank on/off status. Displays the current mute status. Displays the current freeze status. Normal / Freeze Displays the usage time for the current lamp. Displays the usage time for the current filter. Lamp Time / Filter Time Adjusts the brightness. [-]: Decrease the brightness value. [+]: Increase the brightness value. Adjusts the contrast. [-]: Decrease the contrast value. [+]: Increase the contrast value. Switches the gamma mode. Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 / Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 Switches the color temperature mode. High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 Adjusts the strength of whole color. [-]: Decrease the color value. [+]: Increase the color value Adjusts the tint. [-]: Decrease the tint value. [+]: Increase the tint value. Adjusts the sharpness. [-]: Decrease the sharpness value. [+]: Increase the sharpness value. Saves the current adjustment data into the memory. Save-1 / Save-2 / Save-3 / Save-4 Loads the data from the memory. Load-1 / Load-2 / Load-3 / Load-4 [Execute]: Performs each function. Brightness / Contrast / Color / Tint / Sharpness 49

50 Gamma - Custom - Test Pattern Changes the test pattern. Off / 9 steps Gray scale / 15 steps Gray scale / Ramp Gamma Point 1 Adjusts the user gamma point 1. [-]: Decrease the user gamma point 1 value. [+]: Increase the user gamma point 1 value. []: Initialize the user gamma point 1 value. Gamma Point 2 Adjusts the user gamma point 2. [-]: Decrease the user gamma point 2 value. [+]: Increase the user gamma point 2 value. []: Initialize the user gamma point 2 value. Gamma Point 3 Adjusts the user gamma point 3. [-]: Decrease the user gamma point 3 value. [+]: Increase the user gamma point 3 value. []: Initialize the user gamma point 3 value. Gamma Point 4 Adjusts the user gamma point 4. [-]: Decrease the user gamma point 4 value. [+]: Increase the user gamma point 4 value. []: Initialize the user gamma point 4 value. Gamma Point 5 Adjusts the user gamma point 5. [-]: Decrease the user gamma point 5 value. [+]: Increase the user gamma point 5 value. []: Initialize the user gamma point 5 value. Gamma Point 6 Adjusts the user gamma point 6. [-]: Decrease the user gamma point 6 value. [+]: Increase the user gamma point 6 value. []: Initialize the user gamma point 6 value. Gamma Point 7 Adjusts the user gamma point 7. [-]: Decrease the user gamma point 7 value. [+]: Increase the user gamma point 7 value. []: Initialize the user gamma point 7 value. Gamma Point 8 Adjusts the user gamma point 8. [-]: Decrease the user gamma point 8 value. [+]: Increase the user gamma point 8 value. []: Initialize the user gamma point 8 value. Color Temp - Custom - Test Pattern Color Temp Gain R Color Temp Gain G Color Temp Gain B Color Temp Offset R Color Temp Offset G Color Temp Offset B Changes the test pattern. Off / 9 steps Gray scale / 15 steps Gray scale / Ramp Adjusts the red color temperature gain. [-]: Decrease the red color temperature gain value. [+]: Increase the red color temperature gain value. []: Initialize the red color temperature gain value. Adjusts the green color temperature gain. [-]: Decrease the green temperature temp gain value. [+]: Increase the green color temperature gain value. []: Initialize the green color temperature gain value. Adjusts the blue color temperature gain. [-]: Decrease the blue color temperature gain value. [+]: Increase the blue color temperature gain value. []: Initialize the blue color temperature gain value. Adjusts the red color temperature offset. [-]: Decrease the red color temperature offset value. [+]: Increase the red color temperature offset value. []: Initialize the red color temperature offset value. Adjusts the green color temperature offset. [-]: Decrease the green color temperature offset value. [+]: Increase the green color temperature offset value. []: Initialize the green color temperature offset value. Adjusts the blue color temperature offset. [-]: Decrease the blue color temperature offset value. [+]: Increase the blue color temperature offset value. []: Initialize the blue color temperature offset value. 50

51 [IMAGE] Tab Aspect Over Scan Position H Phase H Size Auto Adjust [INPUT] Tab Progressive Video NR Color Space Video Format - S-Video Video Format - Video HDMI Format HDMI Range Computer in - Computer in1 Computer in - Computer in2 Frame Lock - Computer in1 Frame Lock - Computer in2 Frame Lock - HDMI Switches the mode for aspect ratio. Normal / 4:3 / 16:9 / 16:10 / 14:9 Adjusts the over-scan ratio. [-]: Decrease the over scan value. [+]: Increase the over scan value. Adjusts the display position. [ ]: Increase the vertical position value. [ ]: Decrease the vertical position value. [ ]: Increase the horizontal position value. [ ]: Decrease the horizontal position value. Adjusts the horizontal phase to eliminate flicker. [-]: Decrease the horizontal phase value. [+]: Increase the horizontal phase value. Adjusts the horizontal size. [-]: Decrease the horizontal size value. [+]: Increase the horizontal size value. [Execute]: Performs the automatic adjustment feature. Over Scan / V Position / H Position / H Size Switches the progress mode. TV / Film / Off Switches the noise reduction mode. High / Mid / Low Switches the mode for color space. Auto / RGB / SMPTE240 / REC709 / REC601 Switches the mode for video format of the S-VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Switches the mode for video format of the VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Switches the video format for an input from the HDMI port. Auto / Video / Computer Changes the digital range for an input from the HDMI port. Auto / Normal / Enhanced Selects the computer input signal type of the COMPUTER IN1 port. Auto / Sync On G Off Selects the computer input signal type of the COMPUTER IN2 port. Auto / Sync On G Off Selects the frame lock function on/off of the COMPUTER IN1 port. Selects the frame lock function on/off of the COMPUTER IN2 port. Selects the frame lock function on/off of the HDMI port. 51

52 [SETUP] Tab Auto Keystone Keystone V Auto Eco Mode Eco Mode Installation Standby Mode Monitor Out - Computer in1 Monitor Out - Computer in2 Monitor Out - LAN Monitor Out - USB type A Monitor Out - USB type B Monitor Out - HDMI Monitor Out - S-Video Monitor Out - Video Monitor Out - Standby [AUDIO] Tab Volume Speaker Audio Source - Computer in1 Audio Source - Computer in2 Audio Source - LAN Audio Source - USB type A Audio Source - USB type B Audio Source - HDMI Audio Source - S-Video Audio Source - Video Audio Source - Standby HDMI Audio [Execute]: Performs the automatic keystone distortion correction. Corrects the vertical keystone distortion. [-]: Decrease the vertical keystone value. [+]: Increase the vertical keystone value. Turns on/off the auto eco mode. Switches the eco mode. Normal / Eco / Intelligent Eco Switches the mode for installation status. Front/Desktop / Rear/Desktop / Rear/Ceiling / Front/Ceiling Switches the standby mode setting. Normal / Saving Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected. Computer in1 / Off Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected. Computer in2 / Off Assigns the MONITOR OUT when the LAN input port is selected. Assigns the MONITOR OUT when the USB TYPE A input port is selected. Assigns the MONITOR OUT when the USB TYPE B input port is selected. Assigns the MONITOR OUT when the HDMI input port is selected. Assigns the MONITOR OUT when the S-VIDEO input port is selected. Assigns the MONITOR OUT when the VIDEO input port is selected. Assigns the MONITOR OUT in the standby mode. Keystone V Adjusts the volume. [-]: Decrease the volume value. [+]: Increase the volume value. Turns on/off the built-in speaker. Assigns the audio port when the COMPUTER IN1 input port is selected. Audio in1 / Audio in2 / Off Assigns the audio port when the COMPUTER IN2 input port is selected. Audio in1 / Audio in2 / Off Assigns the audio port when the LAN input port is selected. LAN / Audio in1 / Audio in2 / Off Assigns the audio port when the USB TYPE A input port is selected. Audio in1 / Audio in2 / Off Assigns the audio port when the USB TYPE B input port is selected. USB type B / Audio in1 / Audio in2 / Off Assigns the audio port when the HDMI input port is selected. Audio HDMI / Audio in1 / Audio in2 / Off Assigns the audio port when the S-VIDEO input port is selected. Audio in1 / Audio in2 / Off Assigns the audio port when the VIDEO input port is selected. Audio in1 / Audio in2 / Off Assigns the audio port in the standby mode. Audio in1 / Audio in2 / Off Switches the mode for the HDMI audio. 1 / 2 52

53 [SCREEN] Tab Language Menu Position Blank Start Up MyScreen Lock Message Template C.C. - Display C.C. - Mode C.C. - Channel [OPTION] Tab Auto Search Auto Keystone Direct Power On Auto Power Off USB type B My Button-1 My Button-2 My Button-Eco My Source Switches the OSD (On Screen Display) language. English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese / Simplified Chinese / Traditional Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish Adjusts the menu position. [ ]: Increase the vertical menu position value. [ ]: Decrease the vertical menu position value. [ ]: Decrease the horizontal menu position value. [ ]: Increase the horizontal menu position value. Switches the mode for the blank screen. MyScreen / Original / Blue / White / Black Switches the mode for the start-up screen. MyScreen / Original / Off Turns on/off the MyScreen lock function. Turns on/off the message function. Switches the mode for the template screen. Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2 Selects the Closed Caption Display setting. Auto / Selects the Closed Caption Mode setting. Captions / Text Selects the Closed Caption Channel setting. 1 / 2 / 3 / 4 Menu Position V / Menu Position H Turns on/off the automatic signal search function. Turns on/off the automatic keystone function. Turns on/off the Direct Power On function. Adjusts the time to count down to automatically turn the projector off. [-]: Decrease the auto power off time. [+]: Increase the auto power off time. Selects the function of USB TYPE B port. Mouse / USB Display Assigns the function for the MY BUTTON-1 button on the included remote control. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Picture Mode / Filter / Template / AV Mute / Resolution / Eco Mode / Other Assigns the function for the MY BUTTON-2 button on the included remote control. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Picture Mode / Filter / Template / AV Mute / Resolution / Eco Mode / Other Assigns the function for the MY BUTTON-Eco button on the included remote control. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Picture Mode / Filter / Template / AV Mute / Resolution / Eco Mode / Blank / Freeze / Volume / Auto Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video 53

54 [OTHER] Tab Power Input Source Picture Mode Blank On/Off Mute Freeze Magnify Magnify Position Template My Image My Image Delete Messenger Turns on/off the power. Switches the input source. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video Switches the picture mode. Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom Custom is displayed only. It cannot be set. Turns on/off the blank. Turns on/off the mute. Turns off/on the freeze. Normal / Freeze Adjusts the magnify setting. [-]: Decrease the magnify value. [+]: Increase the magnify value. Adjusts the magnify position. [ ]: Decrease the vertical magnify position value. [ ]: Increase the vertical magnify position value. [ ]: Decrease the horizontal magnify position value. [ ]: Increase the horizontal magnify position value. Turns on/off the template screen. Displays the My Image data. Image-Off / Image-1 / Image-2 / Image-3 / Image-4 Deletes the My Image data. Image-1 / Image-2 / Image-3 / Image-4 Displays the Messenger. Message-Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 / Message-6 / Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12 54

55 CL72X / CL73W / CL73X / NE7 / PL93X / WX36i / X31i / X36i / X46i [STATUS] Tab Power Input Source Error Status Blank On/Off Mute Freeze Lamp Time Filter Time [PICTURE] Tab Brightness Contrast Gamma Color Temp Color Tint Sharpness Active Iris My Memory Displays the current power status. On / Standby / Cool down Displays the current Input source. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video Displays the current error status. Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error / Other Error Displays the current blank on/off status. Displays the current mute status. Displays the current freeze status. Normal / Freeze Displays the usage time for the current lamp. Displays the usage time for the current filter. Lamp Time / Filter Time Adjusts the brightness. [-]: Decrease the brightness value. [+]: Increase the brightness value. Adjusts the contrast. [-]: Decrease the contrast value. [+]: Increase the contrast value. Switches the gamma mode. Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 / Default-7 / Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 / Custom-7 Switches the color temperature mode. High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / Hi-Bright-4 / Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 / Custom-7 Adjusts the strength of whole color. [-]: Decrease the color value. [+]: Increase the color value Adjusts the tint. [-]: Decrease the tint value. [+]: Increase the tint value. Adjusts the sharpness. [-]: Decrease the sharpness value. [+]: Increase the sharpness value. Changes the active iris control mode. Presentation / Theater / Off Saves the current adjustment data. Save-1 / Save-2 / Save-3 / Save-4 Loads the data from the memory. Load-1 / Load-2 / Load-3 / Load-4 [Execute]: Performs each function. Brightness / Contrast / Color / Tint / Sharpness 55

56 [Custom - Gamma -] User Gamma Pattern Changes the test pattern. Off / 9 steps Gray scale / 15 steps Gray scale / Ramp User Gamma Point 1 Adjusts the gamma point 1. [-]: Decrease the gamma point 1 value. [+]: Increase the gamma point 1 value. []: Initialize the gamma point 1 value. User Gamma Point 2 Adjusts the gamma point 2. [-]: Decrease the gamma point 2 value. [+]: Increase the gamma point 2 value. []: Initialize the gamma point 2 value. User Gamma Point 3 Adjusts the gamma point 3. [-]: Decrease the gamma point 3 value. [+]: Increase the gamma point 3 value. []: Initialize the gamma point 3 value. User Gamma Point 4 Adjusts the gamma point 4. [-]: Decrease the gamma point 4 value. [+]: Increase the gamma point 4 value. []: Initialize the gamma point 4 value. User Gamma Point 5 Adjusts the gamma point 5. [-]: Decrease the gamma point 5 value. [+]: Increase the gamma point 5 value. []: Initialize the gamma point 5 value. User Gamma Point 6 Adjusts the gamma point 6. [-]: Decrease the gamma point 6 value. [+]: Increase the gamma point 6 value. []: Initialize the gamma point 6 value. User Gamma Point 7 Adjusts the gamma point 7. [-]: Decrease the gamma point 7 value. [+]: Increase the gamma point 7 value. []: Initialize the gamma point 7 value. User Gamma Point 8 Adjusts the gamma point 8. [-]: Decrease the gamma point 8 value. [+]: Increase the gamma point 8 value. []: Initialize the gamma point 8 value. [Custom - Color Temp -] User Gamma Pattern Changes the test pattern. Off / 9 steps Gray scale / 15 steps Gray scale / Ramp Color Temp Gain R Adjusts the color temperature gain R. [-]: Decrease the color temp gain R value. [+]: Increase the color temp gain R value. []: Initialize the color temp gain R value. Color Temp Gain G Adjusts the color temperature gain G. [-]: Decrease the color temp gain G value. [+]: Increase the color temp gain G value. []: Initialize the color temp gain G value. Color Temp Gain B Adjusts the color temperature gain B. [-]: Decrease the color temp gain B value. [+]: Increase the color temp gain B value. []: Initialize the color temp gain B value. Color Temp Offset R Adjusts the color temperature offset R. [-]: Decrease the color temp offset R value. [+]: Increase the color temp offset R value. []: Initialize the color temp offset R value. Color Temp Offset G Adjusts the color temperature offset G. [-]: Decrease the color temp offset G value. [+]: Increase the color temp offset G value. []: Initialize the color temp offset G value. Color Temp Offset B Adjusts the color temperature offset B. [-]: Decrease the color temp offset B value. [+]: Increase the color temp offset B value. []: Initialize the color temp offset B value. 56

57 [IMAGE] Tab Aspect Over Scan Position H Phase H Size Auto Adjust [INPUT] Tab Progressive Video NR Color Space Video Format - S-Video Video Format - Video HDMI Format HDMI Range Computer in - Computer in1 Computer in - Computer in2 Frame Lock - Computer in1 Frame Lock - Computer in2 Frame Lock - HDMI Switches the mode for aspect ratio. CL72X / CL73X / NE7 / PL93X / X31i / X36i / X46i Normal / 4:3 / 16:9 / 16:10 / 14:9 CL73W / WX36i Normal / 4:3 / 16:9 / 16:10 / 14:9 / Native Adjusts the over-scan ratio. [-]: Decrease the over scan value. [+]: Increase the over scan value. Adjusts the display position. [ ]: Increase the vertical position value. [ ]: Decrease the vertical position value. [ ]: Increase the horizontal position value. [ ]: Decrease the horizontal position value. Adjusts the horizontal phase to eliminate flicker. [-]: Decrease the horizontal phase value. [+]: Increase the horizontal phase value. Adjusts the horizontal size. [-]: Decrease the horizontal size value. [+]: Increase the horizontal size value. [Execute]: Performs the automatic adjustment feature. Over Scan / V Position / H Position / H Size Switches the progress mode. TV / Film / Off Switches the noise reduction mode. High / Mid / Low Switches the mode for color space. Auto / RGB / SMPTE240 / REC709 / REC601 Switches the mode for video format of the S-VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Switches the mode for video format of the VIDEO port. Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL Switches the video format for an input from the HDMI port. Auto / Video / Computer Changes the digital range for an input from the HDMI port. Auto / Normal / Enhanced Selects the computer input signal type of the COMPUTER IN1 port. Auto / Sync On G Off Selects the computer input signal type of the COMPUTER IN2 port. Auto / Sync On G Off Selects the frame lock function on/off of the COMPUTER IN1 port. Selects the frame lock function on/off of the COMPUTER IN2 port. Selects the frame lock function on/off of the HDMI port. 57

58 [SETUP] Tab Auto Keystone Keystone V Auto Eco Mode Eco Mode Installation Standby Mode Monitor Out - Computer in1 Monitor Out - Computer in2 Monitor Out - LAN Monitor Out - USB type A Monitor Out - USB type B Monitor Out - HDMI Monitor Out - S-Video Monitor Out - Video Monitor Out - Standby [AUDIO] Tab Volume Speaker Audio Source - Computer in1 Audio Source - Computer in2 Audio Source - LAN Audio Source - USB type A Audio Source - USB type B Audio Source - HDMI Audio Source - S-Video Audio Source - Video Audio Source - Standby Mic Level Mic Volume [Execute]: Performs the automatic keystone distortion correction. Corrects the vertical keystone distortion. [-]: Decrease the vertical keystone value. [+]: Increase the vertical keystone value. Turns on/off the auto eco mode. Turns off/on the eco mode. Normal / Eco / Intelligent Eco / Saver Switches the mode for mirror status. Front/Desktop / Rear/Desktop / Rear/Ceiling / Front/Ceiling Switches the standby mode setting. Normal / Saving Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected. Computer in1 / Off Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected. Computer in2 / Off Assigns the MONITOR OUT when the LAN input port is selected. Assigns the MONITOR OUT when the USB TYPE A input port is selected. Assigns the MONITOR OUT when the USB TYPE B input port is selected. Assigns the MONITOR OUT when the HDMI input port is selected. Assigns the MONITOR OUT when the S-VIDEO input port is selected. Assigns the MONITOR OUT when the VIDEO input port is selected. Assigns the MONITOR OUT in the standby mode. Keystone V Adjusts the Volume. [-]: Decrease the volume. [+]: Increase the volume. Turns on/off the built-in speaker. Assigns the AUDIO SOURCE when the COMPUTER IN1 input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the AUDIO SOURCE when the COMPUTER IN2 input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the AUDIO SOURCE when the LAN input port is selected. LAN / Audio in1 / Audio in2 / Audio in3 / Off Assigns the AUDIO SOURCE when the USB TYPE A input port is selected. USB type A / Audio in1 / Audio in2 / Audio in3 / Off Assigns the AUDIO SOURCE when the USB TYPE B input port is selected. USB type B / Audio in1 / Audio in2 / Audio in3 / Off Assigns the AUDIO SOURCE when the HDMI input port is selected. HDMI / Audio in1 / Audio in2 / Audio in3 / Off Assigns the AUDIO SOURCE when the S-VIDEO input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the AUDIO SOURCE when the VIDEO input port is selected. Audio in1 / Audio in2 / Audio in3 / Off Assigns the AUDIO SOURCE in the standby mode. Audio in1 / Audio in2 / Audio in3 / Off Switches the input level to match that of the microphone connected to the MIC port. High / Low Adjusts the volume of the microphone connected to the MIC port. [-]: Decrease the volume of the microphone. [+]: Increase the volume of the microphone. 58

59 [SCREEN] Tab Language Menu Position Blank Start Up MyScreen Lock Message Template C.C. - Display C.C. - Mode C.C. - Channel [OPTION] Tab Auto Search Auto Keystone Direct Power On Auto Power Off USB type B My Button-1 My Button-2 My Source [Service] Remote Freq. - Normal Remote Freq. - High Switches the OSD language. English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese / Simplified Chinese / Traditional Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Danish / Czech / Hungarian / Romanian / Slovenian / Croatian / Greek / Lithuanian / Estonian / Latvian / Thai / Arabian / Persian / Portuguese -Brazil Adjusts the menu position. [ ]: Increase the vertical menu position. [ ]: Decrease the vertical menu position. [ ]: Decrease the horizontal menu position. [ ]: Increase the horizontal menu position. Switches the mode for the blank screen. MyScreen / Original / Blue / White / Black Switches the mode for the start-up screen. MyScreen / Original / Off Turns on/off the MyScreen lock function. Turns on/off the message function. Switches the mode for the template screen. Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2 Selects the Closed Caption Display setting. Auto / Selects the Closed Caption Mode setting. Captions / Text Selects the Closed Caption Channel setting. 1 / 2 / 3 / 4 Menu Position V / Menu Position H Turns on/off the automatic signal search function. Turns on/off the automatic keystone function. Turns on/off the Direct Power On function. Adjusts the time to count down to automatically turn the projector off. [-]: Decrease the Auto Power off time. [+]: Increase the Auto Power off time. Selects the function of USB TYPE B port. Mouse / USB Display Assigns the function for the MY BUTTON-1 button on the included remote control. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris / Picture Mode / Filter / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Saver Mode / Other Assigns the function for the MY BUTTON-2 button on the included remote control. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris / Picture Mode / Filter / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Saver Mode / Other Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video Changes the projector s remote sensor on/off of the normal frequency. Enable / Disable Changes the projector s remote sensor on/off of the high frequency. Enable / Disable 59

60 [OTHER] Tab Power Input Source Picture Mode Blank On/Off Mute Freeze Magnify Magnify Position Template On/Off My Image My Image Delete Messenger Turns on/off the power. Switches the input source. Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video Switches the picture mode. Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Photo / Custom Custom is displayed only. It cannot be set. Turns on/off the blank. Turns on/off the mute. Turns off/on the freeze. Normal / Freeze Adjusts the magnify setting. [-]: Decrease the magnify value. [+]: Increase the magnify value. Adjusts the magnify position. [ ]: Decrease the vertical magnify position. [ ]: Increase the vertical magnify position. [ ]: Decrease the horizontal magnify position. [ ]: Increase the horizontal magnify position. Turns on/off the template screen. Displays the My Image data. Off / Image-1 / Image-2 / Image-3 / Image-4 Deletes the My Image data. Image-1 / Image-2 / Image-3 / Image-4 Displays the Messenger. Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 / Message-6 / Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12 60

61 3.9 Image Send to Projector If the projector supports My Image (e-shot) feature, you can select My Image (e-shot) function. Click [Image Send] icon, the window [Send Image File to projector(s)] will be appeared MY IMAGE (e-shot) Mark projectors that you will transfer an image. Select the image file that should be transferred and stored number. The compatible image file is only PJ1 format file that can be created by Projector Image Tool (PJImg). And then, click the Send button to transfer image. The progress bar is shown during transfer. The status will change OK if it succeeds. [Note] - This feature is only available for CL33X, CL35X, CL67N, CL69N, CL72X, CL73W, CL73X, CL86X, NE7, PL90X, PL92X, PL93X, WX36, WX36i, X21i, X26i, X30N, X31, X31i, X35N, X35NK, X36, X36i, X46, X46i, X56, X90 and X90K. - Please verify the port setting on the projector and the port / authentication setting on the application. Once you select the image file and store location number, the Send button becomes available. The compatible image file is only PJ1 format file that can be created by Projector Image Tool (PJImg).And then, click the Send button to transfer image. The maximum size of transferred file is depending on the model. Please check the following list. PJ1 format file CL33X / CL35X / CL67N / CL69N / CL72X / CL73W / CL73X / CL86X / NE7 / PL90X / PL92X / PL93X / WX36 / WX36i / X21i / X26i / X30N / X31 / X31i / X35N / X35NK / X36 / X36i / X46 / X46i / X56 / X90 / X90K Less than equal 130,816byte JPEG file CL33X / CL35X / CL67N / CL69N / CL72X / CL73W / CL73X / CL86X / NE7 / PL92X / PL93X / WX36 / WX36i / X21i / X26i / X31 / X31i / X36 / X36i / X46 / X46i / X56 Less than equal 262,144byte 3.11 Software Version You can check the software version information to click About icon, or choose About Projector Control Application on the menu. 61

62