NOVITOME, MULTITOME, OXYTOME 5, type C. Thermal cutting machines.
|
|
- Beverly Morris
- 5 years ago
- Views:
Transcription
1 NOVITOME, MULTITOME, OXYTOME 5, type C Thermal cutting machines.
2 THERMAL CUTTING A la carte and made to measure You need to cut out metal parts of various shapes, in thicknesses from 3 mm to 230 mm and on a one off or repeat basis. The SAF type C Cantilever range of automatic thermal cutting machines is the easy, fast and economical answer to your needs, including a machine optimally suited to the needs of your company. CANTILEVER TRASAF reader DIGISAF The Cantilever principle means that the machine arm projects out over the cutting field from one side, offering better access for plate handling. Guidance is simplicity itself, with direct optical reading of a simple paper template, either a black line drawing against a white ground or a cut out silhouette. Digital controller: DIGISAF digital control represents a step towards greater accuracy, quality and, of course productivity. All our Type C machines with optical reader can be fitted with DIGISAF digital controllers, either from the outset or added later by a simple operation.
3 3
4 NOVITOME C-T T 1030 Simple and cost-effective NOVITOME C is the entry level for automatic thermal cutting machine. Shipped from the factory completely assembled, these machines could hardly be easier to use. Installing them in your workshop is child's play. Light in weight and compact in size, they will stand on any level floor, without being bolted down, so they can be moved easily as required. The NOVITOME C-T 1030 version equipped with the DIGISAF 2.5+ digital controller brings you all the advantages of a digitally controlled machine: accurate tracing controlled by encoders and measuring racks Machine catalogue N Fixer reader table yes yes yes 2 Two motorized carriages yes yes yes 3 TRASAF optical reader T 1010 T 1030 T DIGISAF 2.5+ digital controller no * no * yes 4 Encoders, racks, cables no * no * yes 5 Gas distributor for four torches with oxygen solenoid valves yes yes yes 6 Manual control torch-holder (minus torch) (maxi 4) (maxi 4) (maxi 4) 7 Oxy/plasma selector module no yes yes 8 Monorail with supply hoses yes yes yes Tools and documentation yes yes yes * can be fitted later PCM module (one per ring). For electrical power supply to and control of motorised torch-holder rings (maximum four on NOVITOME C only). D Equipment common to the NOVITOME C B 500 Motorised torch-holder ring Manual control torch-holder A 400 Operator passageway C Max diameter of a circle cut with one torch 1250 F2 F E Travel and overall dimensions (mm) A Reader transverse travel B Torch transverse travel (excl passageway) C Max distance between two torches (excl passageway) D Minimum distance between two torches 95 E Overall footprint (length x width) x F1 Longitudinal travel in coordinate mode with digital control F2 Longitudinal travel with TRASAF reader For remote control of the torch. You can adjust the torch height in operation for more accurate cutting. (for ruggedness and safety) Four adjustments: 250 mm vertical travel, 60 mm horizontal travel, ± 45 double rotation for bevel cuts.
5 MULTITOME C-T 1503 Designed like its big brothers F With the MULTITOME C machines you can cut plates up to 2 m wide with high productivity. These machines are very easy to use thanks to a central control console and a mobile reader table. G A E D B Machine catalogue N m rail and stand yes yes m mobile reader table yes yes 3 Beam assembly with motor drive yes yes 4 TRASAF optical reader T 1503 T DIGISAF digital controller no * yes 6 Encoders, racks, cables no * yes 7 Gas distributor for four torches with oxygen solenoid valves yes yes 8 Manual control torch-holder 1 1 (minus torch) (maxi 4) (maxi 4) and MULTITOME C Gas distribution To feed up to four torches with three inlets. This rational torch feeding system includes a cutting and purge solenoid to control the flow of gas. This allows simultaneous remote control of the cutting oxygen feed. Soft starting * can be fitted later. Facilitates starting cuts in mid-plate by fine control of the cutting oxygen feed. Complemented by solenoid valves for controlling normal and extra heating gases H Travel and overall dimensions (mm) A Reader transverse travel B Transverse travel of one torch (excl passageway) C Max distance between two torches (excl passageway) D Min distance between two torches 95 E Width of operator passageway 400 F Overall width G Longitudinal travel (with basic 3 m rail) H Overall length (with basic 3 m rail) Plasma cutting option: The MULTITOME C machine is particularly adapted to the plasma arc cutting. The plasma process enables to cut all conductive materials and especially the stainless steels and light alloys. The ZIP 5.0 installation with its efficient cycle, its arc voltage height sensor which accurately assures the distance between the plasma torch and the plate without any contact, its water cooled CPM 15 torch allows you also to cut, in an economical way, carbon steels with compressed air plasma. This installation can also be fitted on a NOVITOME 3 C-T C 5
6 OXYTOME 5C-T 1520 Evolutive and cost effective Two motorised tool-holders mounted on individual ball-bearing carriages; extremely comprehensive gas feed system; central control panel can be turned for easy control in complete safety; unlimited cutting length as the rail can be extended in units of 4 metres and 2 metres; the number of tool-holders can be increased to six: the gas and electrical connections are ready and waiting; the machine is designed to be fitted with a PLASMA torch and the ETA 601 height sensor Machine catalogue number m rail with support yes yes m mobile reader table with brake yes yes 3 Beam assembly with drive system yes yes 4 TRASAF optical reader T 1520 T DIGISAF 2.5+ digital controller no * yes 6 Encoders, racks, cables no * yes 7 Gaz station: heating, extra heating, soft start device yes yes 8 PO 105 motorised torch-holder 2 2 (minus torch) (maxi 6) (maxi 6) 6 * can be fitted later. D A F E C B G Travel and overall dimensions (mm) A Reader transverse travel B Transverse travel of one torch (excl passageway) C Max distance between two torches (excl passageway) D Min distance between two torches 95 E Width of operator passageway 680 F Overall width G Longitudinal travel (basic rail) basic rail length reader table length weight of basic machine (kg) 800 H Overall length (4 m rail) H 6
7 Equipments TRASAF reader Central control panel DIGISAF digital controller Can read full scale drawings directly. Combined with the DIGISAF digital controller, it will digitise your drawings for storage in memory. Gas feed station PO 105 motorised tool-holder QB This compact unit groups together the power supply units, the optical reader controls (HL8), and the cutting process and general controls. Located at the centre of the machine, the console can be turned to facilitate control of the machine in complete safety. This is fitted out as standard for six torches. It includes: heating gas, extra heating gas, soft start device. This includes the carriage, the motorised tool raiser (electrical travel = 100 mm), and the orientable ended torch or plasma torch support. The PO 105 tool-holder carriages are designed for a minimum distance between (95 mm) for cutting narrow ship. Options torch Universal machine torch (option), this new type of torch can be fitted with all our cutting tips: G1 and MACH 3S are particularly well thought of by the main users of oxycutting. Remote electrical ignition (not illustrated). Plasma cutting ZIP 5.0 The ZIP 5.0 installation with its efficient cycle, its arc voltage height sensor which accurately assures the distance between the plasma torch and the plate without any contact, its water cooled CPM 15 torch allows you also to cut, in an economical way, carbon steels with compressed air plasma Feed rail This improves feeding, reduces wear of hoses and cables and is ready for immediate use
8 DIGISAF Make yourself more competitive with a digital controller Controlled by the DIGISAF digital controller, your cutting machine is even more accurate and entirely automated, to the benefit of cut quality programming of your own shapes using manual data input (MDI); automatic cutting of any specified number of parts; dimensional correction using scale factor and cut compensation functions; RS 232 interface for connection to a PC and off-line programming Protection of the environnement: smoke extraction and treatment Health and safety considerations make cutting smoke extraction essential. A well designed work site should promote operator comfort and maintain good working conditions. One solution to this requirement is a plate table with built-in smoke extraction. Plate table kit flexibility and simplicity of interactive digital control with 512 K of battery-backed memory; easy programming of 50 standard shapes, stored in non-volatile memory; reading of templates into memory with TRASAF (digitisation); The MAGICSAF JUNIOR programming centre or computer-aided cutting. A cost-effective solution for remotely programming your DIGISAF digital controller in time that would otherwise be wasted (saving time and materials). MAGICSAF JUNIOR is a complete package ready to use: CAD and CAM software; microcomputer; peripheral devices. For more information see our brochures and Ideal for use with the NOVITOME C and MULTITOME C machines, the plate table is entirely enclosed. A smoke extraction outlet is provided for use in plasma cutting. To use the machine for oxycutting just take off the top metal grating. Usable surface area: x mm. AZURMATIC table Main functions: for a modest investment DIGISAF brings undeniable benefits. Recommended for the OXYTOME 5 C for high-production oxycutting of thicknesses up to 200 mm. Smoke is extracted via a central channel fitted with shutters operated automatically by the movement of the torch. Containers can be sling-mounted to collect slag. The table is modular for extension to any length. AZUR * Selectable start position CW/CCW cutting. Selectable repeat direction. ** Allows selection of any number of holes. *** Allows square or radius corners Dashed holes may be omitted. Corner radius may be set to 0 for sharp corners Smoke extraction and treatment equipment. Fans, mechanical and electrostatic filters, self-cleaning extraction unit, trunking and accessories, etc
9 TRASAF Optical readers TRASAF 1010 TRASAF 1030 TRASAF 1503 TRASAF 1520 Associated machine NOVITOME C NOVITOME C MULTITOME C OXYTOME 5 C Maxi speed (cm/min) /300 Cut correction (± mm) (electronic) 3 Read direction (1 = clockwise) Lead-angle all angles all angles all angles all angles Template thickness (line or silhouette) (mm) Minimum distance between two templates (mm) Minimum radius dependent on speed for 90 angle 0 to 75 0 to 75 0 to 75 0 to 75 without deceleration 1.6 to to to 150 (mm) Deceleration at comers (1 = standard) no yes (1) yes (1) yes (2) (2 = option) Read ahead (interchangeable mirrors) no no yes yes Reproduction accuracy at 75 cm/min (mm) ±0.25 ±0.25 ±0.25 ±0.25 Speed accuracy (%) ± 0.10 ± 0.10 ± 0.10 ± 0.10 Straight cutting, without template yes yes yes yes Automatic contour capture and loss of yes yes yes yes contour safety feature Position marker (light spot) yes yes yes yes Switches for motorized yes torch-holder no (1) for plasma yes (4) yes (6) Switches for heating and extra heating no no yes yes DIGISAF connector yes yes yes yes Single-phase electrical power (+10%, -15%) (V) Frequency (Hz) 50 and and and and 60 Min/max operating temperature ( C) 0/50 0/50 0/50 0/50 Relative humidity, non condensing 95 % 95 % 95 % 95 %
10 SAF S 01 Ed. 6 QB : 1695 Photos : G. Rocskay - J.N. François SAF reserves itself the right to embody modifications without prior notice. The illustrations descriptions and characteristics are given for information only and do not engage the responsability of the constructor. Imagine what your performance could be SAF WELDING PRODUCTS LTD - LOW MARCH - LONDON ROAD DAVENTRY - NORTHANTS NN 11 4 SD TEL. : 01327/ TELEFAX : 01327/ SAF - 13, RUE D'EPLUCHES - SAINT-OUEN L'AUMÔNE CERGY-PONTOISE - CEDEX FRANCE TEL. : FAX : E mail : info.saf@airliquide.com Internet : DISTRIBUTOR'S STAMP
CITOCUT Plasma inverter cutting range
CITOCUT Plasma inverter cutting range Sword edge cutting www.oerlikon-welding.com The plasma expert advanced plasma cutting powerful all metals performance portable solutions inverter plasma gouging maintenance
More informationPRESTOJET Plasma inverter cutting range
PRESTOJET Plasma inverter cutting range Sword edge cutting www.saf-fro.com The plasma expert advanced powerful all metals performance portable solutions inverter plasma gouging maintenance high quality
More informationSHARP Plasma inverter cutting range
SHARP Plasma inverter cutting range Sword edge cutting www.cemont.com The plasma expert advanced powerful all metals performance portable solutions plasma gouging maintenance high quality The plasma process
More informationRAIL BULL TRACK WELDING CARRIAGE WITH OSCILLATOR
RAIL BULL TRACK WELDING CARRIAGE WITH OSCILLATOR The Rail Bull is a track welding carriage designed to produce butt and fillet welds with or without oscillation. The carriage can work in PA (flat), PB
More informationFlexible. Fast. Precise. PPU-E Pick & Place Unit
PPU-E Flexible. Fast. Precise. PPU-E Pick & Place Unit Compact 2-axis unit for a faster, flexible running of any curve on one plane. Field of Application For use in clean and slightly polluted environment.
More informationGeneral Specifications
General Specifications WG41F11C Compact O Frame GS 14M04B10-20E-Z1 [Style: S1] Overview The WG41F11C Compact O frame is a space-saving frame designed for coating lines of battery electrode sheets. This
More informationEverything under control
FLYER UK 3-2018 01.07.2018 30.09.2018 WELDING TABLES AND CLAMPING SYSTEMS Everything under control THE SIEGMUND TABLE REDEFINED SUB TABLE BOX YOUR TOOLS ALWAYS AT HAND Create storage space under your welding
More informationE-VENT. The turnkey plasma cutting machine. Technica l progress in the design
TM E-VENT. The turnkey plasma cutting machine. Technica l progress in the design of a compact unit. 3 0 01 03 E-VENT DX - The all-rounder. TM Handles the toughest cutting conditions with ease. Be inspired
More informationCITOCUT Plasma inverter cutting range
CITOCUT Plasma inverter cutting range Sword edge cutting www.oerlikon-welding.com The plasma expert advanced powerful all metals performance portable solutions inverter plasma gouging maintenance high
More informationProduct catalogue 2010
Product catalogue 2010 welding, cutting and more... www.kemper.eu Extraction systems for the electronic industry Soldering workstations... 153-154 Soldering smoke extraction systems... 155 Accessories
More informationUp to 85% higher Service Life due to efficient sealing method.
Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348
More informationRexroth IndraDrive Fc Compact, high-performance standard frequency converters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Rexroth IndraDrive Fc Compact, high-performance standard frequency converters Simply a better drive 2
More informationSPECIFICATION NO Model 207 Automatic GTAW Welding System
1.0 Introduction The Model 207 is a completely self-contained Gas Tungsten Arc Welding (GTAW) System requiring only input power, inert gas and AMI Welding Head (or manual torch) for operation. Its small
More information03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through
Feed-through Feed-through FEED-THROUGH Series Size Page Rotary Feed-through for Robots DDF 202 DDF 031 206 DDF 040 208 DDF 040-1 210 DDF 050 212 DDF 050-1 214 DDF 063 216 DDF 080 218 DDF 080-1 220 DDF
More informationModel ED 400 Drying and heating chambers Classic.Line with natural convection
Model ED 400 Drying and heating chambers Classic.Line with natural convection BENEFITS Uniform drying conditions thanks to APT.line technology Identical test conditions throughout the chamber interior
More informationModel KT 53 Cooling incubators with thermoelectric cooling
Model KT 53 Cooling incubators with thermoelectric cooling The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The cooled incubators of the
More informationThe Zehnder LST brings a safe, attractive heating solution to applications where hot radiant surfaces are undesirable.
zehnder LST The Zehnder LST brings a safe, attractive heating solution to applications where hot radiant surfaces are undesirable. The high quality, robust casing and slim lines ensure the Zehnder LST
More informationMPC2000 PRECISION CUTTING SYSTEM
MPC2000 PRECISION CUTTING SYSTEM THE MPC2000 LARGE GANTRY PRECISION CUTTING SYS IS A HEAVY-DUTY WORKHORSE WITH PROVEN PER E behind C F D G See the MPC2000 video here H TEM FORMANCE GLOBAL CONTROL PLUS
More informationKEMPPI K5 WELDING EQUIPMENT. Kempact Pulse 3000 QUALITY, SPEED AND PRODUCTIVITY
KEMPPI K5 WELDING EQUIPMENT Kempact Pulse 3000 QUALITY, SPEED AND PRODUCTIVITY 7.06.2018 Kempact Pulse 3000 POWERFUL MIG/MAG WELDER WITH GREAT CAPACITY Kempact Pulse 3000 is a great combination of power,
More informationWelding equipment for the POLYSTIC system
L Welding equipment for the POLYSTIC system TITGEMEYER Tb1435GB(0110)2 Installation tools 355 Stud-welding machine TSG 60 for drawn-arc stud welding process The compactly-designed TSG 60 combines operating
More informationSPECIFICATION NO NOTE
NOTE The Model 207-1 is a special version of the standard M-207 Power Supply. It has been altered for a special applications requiring low current operation at high arc voltages in ambient and pressurized
More informationLinatron - M9 & M9A. Modular high-energy X-ray source. 2.0 Performance
The Linatron -M is a modular system. The control console, modulator, and RF unit are common to all model configurations. Only the X-ray head changes to match the application. The Linatron - M is designed
More informationRexroth IndraDrive Fc Compact, high-performance standard frequency converters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Rexroth IndraDrive Fc Compact, high-performance standard frequency converters Simply a better drive 2
More informationManipulator Technical Specification Welding/Cutting expert
Manipulator Technical Specification Welding/Cutting expert www.timewelder.com 0 Welding Manipulator Product introduction Welding manipulator is divided into standard (TZ), heavy duty (TZH) types, suitable
More informationManual placement system MPL3100. for BGA, CSP and Fine-Pitch components
Manual placement system MPL3100 for BGA, CSP and Fine-Pitch components Part No: MPL3100BA1.0e Issue Date: 02/2001 You have opted for an ESSEMTEC MPL3100 pick and place system. We thank you for this decision
More informationRoof-mounted Blue e+ cooling unit Integration solution VX25
Roof-mounted Blue e+ cooling unit Integration solution VX25 Ease of use Intuitive operation via touch display Integration solution VX25 and Blue e+ Cooling unit with 1.3 kw and Blue e+ technology with
More informationIMPAC Infrared Thermometers
IMPAC Infrared Thermometers focusable optics for non-contact temperature measurements on metals, ceramics, graphite etc. between 300 and 3300 C IS 140 IGA 140 IS 140-PB IGA 140-PB Short response times
More informationULTRALOW TEMPERATURE FREEZERS -86 C
ULTRALOW TEMPERATURE FREEZERS -86 C NUAIRE MEANS ENVIRONMENTALLY SAFE Laboratory professionals the world over depend on NuAire for safe, reliable laboratory equipment that lasts longer and performs better
More informationEngineered to meet your needs T he oldest name in stud welding,
Engineered to meet your needs T he oldest name in stud welding, Nelson Stud Welding Inc., continues it s leadership role into the 21st century with the introduction of a full line of new drawn-arc welding
More informationNEW SWIVELING UNIT RSP-FLEX. Smooth and precise swiveling
NEW SWIVELING UNIT RSP-FLEX Smooth and precise swiveling SWIVELING UNIT RSP-FLEX Especially with automated loading and unloading of machine tools, the RSP-Flex swivel units offer an alternative to expensive
More informationSwiveling unit. Smooth and precise swiveling
NEW Swiveling unit RSP-FLEX Smooth and precise swiveling Swiveling unit RSP-FLEX Especially with automated loading and unloading of machine tools, the RSP-Flex swivel units offer an alternative to expensive
More informationScanning System S-2100
2D laser measurement system The fastest 2D laser measurement system in the world 119 m range Scan rate >1 million points/sec 360 vertical field of view System description The PENTAX Scanning System S-2100
More informationDMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 6 bar up to 0... 600 bar Output signals -wire: 4... 0 ma -wire:
More informationVarioSynergic 3400 / 4000 / 5000 VarioSynergic / / MIG/MAG welding PERFECT WELDING
VarioSynergic 3400 / 4000 / 5000 VarioSynergic 3400-2 / 4000-2 / 5000-2 MIG/MAG welding PERFECT WELDING A high-calibre machine that s user-friendly, too. GENERAL REMARKS UTILISATION It s got the lot The
More informationModel KT 170 Cooling incubators with thermoelectric cooling
Model KT 170 Cooling incubators with thermoelectric cooling BENEFITS Safe and reproducible incubation conditions even at high environmental conditions Disinfection routine at 100 C Energy efficient, environmentally
More informationFTTH & FITH. Discreet optical fiber solutions from the network connection point to the set-top box.
FTTH & FITH Discreet optical fiber solutions from the network connection point to the set-top box www.omelcom.com FIBER: THE FUTURE IS HERE The past several years have seen major progress in the penetration
More informationModel KT 115 Cooling incubators with thermoelectric cooling
Model KT 115 Cooling incubators with thermoelectric cooling The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The cooled incubators of the
More informationModel FP 240 Drying and heating chambers Classic.Line with forced convection and program functions
Model FP 240 Drying and heating chambers Classic.Line with forced convection and program functions A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying
More informationOptical Cryostat - Omniplex TM
The Omniplex TM, DE204*F-FMX-19OP, is a top loading optical cryostat with the ARS manufactured DE-204 cryocooler. The ARS Omniplex TM systems features large optical access and quick sample change. The
More informationModel CB 60 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor
Model CB 60 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor The BINDER CB series CO 2 incubator is the premium class among the CO 2 incubators. It is suitable for all sensitive
More information2200i 1 2. Entry to high-performance tableting. 2200i.
2200i 1 2 Entry to high-performance tableting 2200i www.fette-compacting.com Profile: Tablet press 2200i single-sided rotary tablet press The single-sided rotary tablet press 2200i is your best choice
More informationIS 140 IGA 140 IS 140-PB IGA 140-PB IS 140-PN IGA 140-PN IS 140-ET IGA 140-ET
IMPAC Infrared Temperature Sensors focusable optics for non-contact temperature measurements on metals, ceramics, graphite etc. between 220 and 3500 C IS 140 IGA 140 IS 140-PB IGA 140-PB IS 140-PN IGA
More informationProduct Data Sheet 4656 EZ
The engineer's choice 4656 EZ INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
More informationGS-HYDRO END FORMING MACHINES
GS-HYDRO END FORMING MACHINES Main index Reshaping machine... 4 Pre-assembly machines... 5 Deburring machines... 6 Tube cutting machines... 7 Cleaning system... 8 3 Reshaping machine M-WF 385Xplus Walform
More informationDewatering. Series description Wilo-Drain STS 65. Submersible sewage pump
Series description Wilo-Drain STS 65 Thermal winding monitoring Max. fluid temperature: 3-40 C Cable length: 10 m Free ball passage: 65 mm Max. immersion depth: 10 m Equipment/function Thermal motor monitoring
More informationTHE CABLE TRAY SYSTEM
C A B L E S A N I T A T I O N C A B L E T R A Y S Y S T E M S THE CABLE TRAY SYSTEM The SILTEC cable tray system is a product, developed for optimum functionality and with focus on simplicity and accessibility,
More informationNikon s DigiMicro Position Encoders Nanometer Resolution with Sub-Micron Accuracy
Nikon s DigiMicro Position Encoders Nanometer Resolution with Sub-Micron Accuracy Available in North America through NanoWave, Inc. The DigiMicro product line from Nikon is a family of optically-based
More informationLabel Applicator HERMA 400
Label Applicator HERMA 400 Info GB V6.0 / 30.3.07 [ Facts & Data ] R Constructional variant Right-hand or left-hand version, always flexible to use L Power supply / Line voltage Max. power consumption
More informationENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:
ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental
More informationModel ED 23 Drying and heating chambers Classic.Line with natural convection
Model ED 23 Drying and heating chambers Classic.Line with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 C. Thanks to the
More informationLinear flow controls VFC Linear flow controls with actuator IFC
Linear flow controls VFC Linear flow controls with actuator Product brochure GB 3 Edition 01.16 Linear relationship between adjustment angle and flow rate Large control ratio of 25:1 Actuators IC 20 or
More information3.22 Finalize exact specifications of 3D printed parts.
3.22 Finalize exact specifications of 3D printed parts. This is the part that connect between the main tube and the phone holder, it needs to be able to - Fit into the main tube perfectly - This part need
More informationTECHNICAL INFORMATION
OCTALUMINA 120: PARTS LIST AND TECHNICAL INFORMATION HIGH POWER LEDS INNER CORNER LABELED FRAME MOUNTED POWER SUPPLY UNIT EASY PLUG-IN CONNECTION BRACING TECHNIQUE CABLE OUTLET AT THE BOTTOM SYSTEM PACKAGING
More informationAn impressive appearance
An impressive appearance Our table top sealing machines allow you to package your products with a high quality and therefore impressive appearance. These devices work with shrink film, which surrounds
More information7 Lighting Technology
7 Lighting Technology Floodlight 09676E00 explosion protected floodlight for use in explosive gas atmospheres of Zone 2 as well as in areas with combustibledust of Zone 21 and Zone 22. Explosion protection
More informationConnectivity accessories by Nestor Cables
Connectivity accessories by Nestor Cables NesCon product family includes essential installation and connection accessories for fibre optic networks, from ODFs to joint closures and terminations. www.nestorcables.com
More informationLong Stroke and High-Speed Movement
NS NS Rotating Nut inear Actuator ong and High-Speed Movement w w w. i n t e l l i g e n t a c t u a t o r. c o m Nut Rotation Actuator that Provides ong and Speed Nearly As Fast as a inear Speed 0 mm/s,
More informationAltman Lighting AP-150 RGBW Par Specification
1.01 COLOR MIXING LED WASH FIXTURE A. General 1. The fixture shall be Red, Green, Blue, and White LED luminaire with motorized zoom and DMX control. The fixture shall be the AP-150 RGBW by Altman Stage
More informationWheelProbe 2. Innovation, Flexibility, Performance
WheelProbe 2 Innovation, Flexibility, Performance Composite inspection WP2 allows you to build the most efficient solutions for scanning large areas of composite. As the best alternative to immersion inspection
More informationCNC Plasma Cutting Systems
CNC Plasma Cutting Systems Make Money Easy to Use Improve Production times Scan to watch in Action! Finance Available! Index 1. Introduction 3. DesignEdge Software 4. Benefits 5. Nesting Feature 6. Digital
More informationCooling systems for ORBIMAT
Cooling systems for ORBIMAT ORBICAR W trolley with integrated liquid cooling The ORBICAR W trolley is the perfect accessory for the Orbitalum 300 A power supplies due to the integrated liquid cooling.
More informationDMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter Nominal pressure from 0... 6 bar up to 0... 600 bar Output
More informationEDGEMAX MAXIMUM PERFORMANCE, PRODUCTIVITY, AND VALUE
EDGEMX MXIMUM PERFORMNCE, PRODUCTIVITY, ND VLUE THE EDGEMX PRECISION CUTTING SYSTEM MXIMUM PERFORMNCE, PRODUCTIVITY ND VLUE E C D F MCHINE HIGHLIGHTS GLOL CONTROLS Our exclusive CNC control is a compact
More informationQC Electromagnetic Overhead Crane Specifications
YUANTAI CRANE QC Electromagnetic Overhead Crane Specifications Compact structure, new style, beautiful outlooking Good in usability with long service life Bearing high capacity, high working class Flexible
More informationModel KT 53 Refrigerated incubators with thermoelectric refrigeration
Model KT 53 Refrigerated incubators with thermoelectric refrigeration The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The refrigerated incubators
More informationviking A New Generation of Plasma Cutting Systems
viking A New Generation of Plasma Cutting Systems Advanced Software That s Simple to Use The Viking comes with field-proven Vulcan Cutting System Software by Quickpen to make light work of even the most
More informationSeries. Processes TIG (GTAW) MIG (GMAW) Plasma Cutting Resistance Welding. Coolmate V3. Coolant systems are warranted for 1 year, parts and labor.
Series Issued Oct. 2010 Index No. AY/7.2 Coolmate Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube Mills Automation Processes TIG (GTAW) MIG (GMAW)
More informationOptical Cryostat - Economy
The CS202*E-DMX-1AL offers a wide range of flexibility at a low cost, making it an excellent choice for most sample and device testing. This system is well suited for optical, electrical, and magnetic
More informationModel KBF 1020 Constant climate chambers with large temperature / humidity range
Model KBF 1020 Constant climate chambers with large temperature / humidity range The BINDER KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climate
More informationNOTE ON PERFORMANCE TESTING
NOTE ON PERFORMANCE TESTING Performance Profile Sheet(s) are included in a format that can be easily photocopied for each trainee. This examination is designed to measure competency in the tasks taught
More informationModel KBF 720 Constant climate chambers with large temperature / humidity range
Model KBF 720 Constant climate chambers with large temperature / humidity range BENEFITS Homogeneous climate conditions thanks to APT.line technology Automatic water and wastewater management Pressure
More informationIndustrial Diode Laser (IDL) System IDL Series
COMMERCIAL LASERS Industrial Diode Laser (IDL) System IDL Series Key Features Round, top-hat beam profile for uniform power distribution Warranted for full rated power in either pulsed or continuous wave
More informationModel KBF P 240 Humidity test chambers with ICH-compliant light source
Model KBF P 240 Humidity test chambers with ICH-compliant light source The KBF P humidity test chamber, equipped with ICH-compliant light source, is an expert when it comes to photostability tests and
More informationThe software concept. Try yourself and experience how your processes are significantly simplified. You need. weqube.
You need. weqube. weqube is the smart camera which combines numerous features on a powerful platform. Thanks to the intelligent, modular software concept weqube adjusts to your situation time and time
More informationDirect PWM. 1000/2000 Series POWERBLOK MODULE
Direct PWM 1000/2000 Series POWERBLOK MODULE Features A universal servo-drive integrated on a Power Hybrid Module. Designed for direct PWM Servo Control Designed for use with Deta Tau's PMAC controllers
More informationKüba comfort DP. Draught-free ventilation and extremely quiet operation
Draught-free ventilation and extremely quiet operation engineering for a better world GEA Heat Exchangers Draught-free ventilation and extremely quiet operation Low air speed in the cold room Integrated
More information2 WIRE - LOOP POWERED TRANSMITTER FOR PT100 AND NI100 PROBES
EN K20RTD 2 WIRE - LOOP POWERED TRANSMITTER FOR PT00 AND NI00 PROBES General Description The K20RTD instrument converts a temperature signal read by a PT00 (EN 60 75) or NI00 probe with connection by 2,
More informationThermoform packaging machine R 126. Automatic and cost-effective packaging
Thermoform packaging machine R 126 Automatic and cost-effective packaging R 126 Application areas Vacuum packaging Modified atmosphere packaging Advantages The R 126 concentrates on the essentials. Your
More informationDOME OPTIC SPLICE CLOSURE
FIBER OPTIC SPIICE CLOSURE GJS-JKDH1001-120 BOX DIMENSION: W=140mm H=340mm Weight = 1.80 kgs Outer Internal structure Fuse fiber disc Type sealing ring Plastic hoop base Pole Mount Pole Mount 1 1. product
More informationTEK-LCD 7801A. NEMA 4X Loop-Powered Feet and Inches Level Meter. ACCESSORIES. Technology Solutions
Technology Solutions TEK-LCD 7801A NEMA 4X Loop-Powered Feet and Inches Level Meter ACCESSORIES www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The
More informationTECHNICAL GUIDE 95.5% AFUE SINGLE STAGE RESIDENTIAL GAS FURNACES MULTI-POSITION MODELS: TG9S
TECHNICAL GUIDE 95.5% AFUE SINGLE STAGE RESIDENTIAL GAS FURNACES MULTI-POSITION MODELS: TG9S NATURAL GAS 40-130 MBH INPUT Due to continuous product improvement, specifications are subject to change without
More informationModel CB 160 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor
Model CB 160 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor The BINDER CB series CO 2 incubator is the premium class among the CO 2 incubators. It is suitable for all sensitive
More informationWheelProbe2. Simplicity Capability Reliability
WheelProbe2 Simplicity Capability Reliability From the innovators who brought the idea to the market over a decade ago, Sonatest is proud to extend its WheelProbe family by introducing the New Generation
More informationAgilent High Capacity RV Pumps & Roots Pumping Systems
Agilent High Capacity RV Pumps & Roots Pumping Systems 2-3 MS-Series Rotary Vane Pumps 4-5 RPS-Series Roots Pumping Systems and RPK-Series Roots Pumping Kits 6-7 Typical Applications 8-15 Pump Models MS-Series
More informationThe supreme discipline
The supreme discipline Automatic film sealing machines The automatic film-sealing machines fulfil the most diverse performance requirements. The bottom seam automatic bag machines manufacture large item
More informationModular Lube Lubrication Systems System Controls
Model 84501 Program Timer Solid State Designed to control the lubrication cycle frequency of air-operated single-stroke pumps. Timer turns pump on/off at programmed intervals via a 3-way or 4-way air solenoid
More informationStud Welding Equipment
Stud Welding Equipment 10/16 N550c Arc Charger Breakthrough Charger design provides powerful 550A Arc Welder from 120V wall outlet! The N550c Arc Charger is the first of a revolutionary new class of stud
More informationThree Axis Digital Readout System
NEWALL MEASUREMENT SYSTEMS C80 Three Axis Digital Readout System CONTENTS 2 SPECIFICATIONS 3 CONNECTIONS 4 MOUNTING 4 Arm Mounting (Non-adjustable) 4 Arm Mounting (Adjustable) 5 Face Mounting (Adjustable)
More informationInnovation & Excellence. Index. Index. Innovation & Excellence. Introduction 4-5. Our Features 6-7. Applications
Linear Motor Stages Index Innovation & Excellence Introduction 3 Our Features 4-5 Applications 6-7 Index MLE Series iron core motor MLE 3 Linear Units MLE 5 Linear Units MLE 7 Linear Units MLU Series ironless
More informationPlasma Cutting Products
Plasma Cutting Products for each task the optimum system Pioneers in Plasma Cutting since 1959 made in Germany Plasma Cutting Technology for each Cutting Task Kjellberg insterwalde a company with long
More informationThe software concept. Try yourself and experience how your processes are significantly simplified. You need. weqube.
You need. weqube. weqube is the smart camera which combines numerous features on a powerful platform. Thanks to the intelligent, modular software concept weqube adjusts to your situation time and time
More informationColor mixing or White-light LED (Light Emitting Diode) ERS-style product
WHT Color mixing or White-light LED (Light Emitting Diode) ERS-style product GENERAL PHYSICAL A. The product shall be an Ovation E-910FC as manufactured by Chauvet & Sons, LLC or approved equal. 1. The
More informationAccessories. Servo Motors. Servo Motors B-47. Accessories
Servo Motors Servo Motors Accessories Accessories Page Cables B-48 Flexible Couplings B-52 Control Module B-55 Data Setting Software B-55 Accessory Sets B-56 Battery B-56 Regeneration Units B-57 B-47 Accessories
More informationHIGH VACUUM PUMPS. Hybrid Turbomolecular Pumps. ATH series. Adixen by Alcatel Vacuum Technology
H I G H V A C U U M P U M P S Adixen by Alcatel Vacuum Technology Hybrid Turbomolecular Pumps 139 Introduction Alcatel offers the of hybrid turbomolecular pumps with pumping speeds ranging from 30 to 300
More informationRPC Robotic Profile Cutter : Beam Profiling 2.0. From Coping to Profiling
RPC Robotic Profile Cutter : Beam Profiling 2.0 From Coping to Profiling Why limit yourself when HGG can do it all? Traditional RPC 2.0 75% 100% Beam Profiling 2.0 HGG set the new industry standard We
More informationN43 N36 N28. Sealed Enclosure Cooling Air Conditioners
SPECTRACOOL NARROW INDOOR/OUTDOOR N43 N36 N28 11000 BTU/Hr. / BTU/Hr. BTU/Hr. 3223 Watt / Watt Watt INDUSTRY STANDARDS UL/cUL Listed; Type 12, 3R, 4; 4X optional; File No. SA6453 CE IP 56 Internal Loop
More informationSIDE CHANNEL BLOWERS. Voltage Δ / Y 2 V 230/ / / / / /460 - Current Δ / Y Revolutions
DB411/415/422/ DESCRIPTION Dutair blowers for pressure and vacuum are compact machines consisting of an electric motor with a built-on pump housing. The rotational speed of the impeller creates a high
More informationSAFETY AND PEACE OF MIND
11/2017 ASTERGB151S00 Stabilimento / Plant Via Bicocca, 14/c 40026 Imola - Bo (Italy) tel. +39 0542 653441 fax +39 0542 653601 Sede legale ed amministrativa Headquarters Cefla s.c. Via Selice Provinciale,
More informationTL8651 3G/HD-SDI Output Video Transceiver. TL8651 Features. Block Diagram TL8651 3G/HD-SDI. 1080p p50
Thunder Link is a family of small form factor modules for formatting and converting generic digital video streams to standard compliant formats. Different interface standards are supported from the transmitter
More informationLED MODULES READYLINE DL
LED MODULES READYLINE DL BUILT-IN MODULE LED-MODULE READYLINE DOWNLIGHT DL WU-M-538 / WU-M-539 / WU-M-540 Typical Applications Downlights Replacement for CFL DIRECT MAINS CONNECTION REDUCED FLICKER HIGH
More information