Omni Ultimate Quick Start Guide. 120V AC or 230V AC.

Transcription

1 Omni Ultimate Quick Start Guide 120V AC or 230V AC

2 POWER YOUR NEXT ADVENTURE For more information visit our support page at 2

3 BEFORE USING CALIBRATE THE BATTERY To make sure the battery percentage reading is correct, please calibrate Omnicharge s battery when you first receive the product and periodically in the future. It's easy to do. Follow these steps: 1. Fully discharge the Omnicharge until the Omnicharge shuts itself off. Press the power button, and you should see an empty battery icon on the screen Fully charge your Omnicharge to 100% to finish the calibration W 100% 20.3 C AC OUTLET Max output power: 150W 1. Quick press AC Outlet Button to turn the AC outlet on/off US/JP EU 2. The AC icon should appear on the screen 100% AC AC 120V/230V AC output 2.07 W 20.3 C 3. Power any device. Laptop TV Drone DSLR Projector And more 3

4 DC OUTPUT 5V - 60V with 0.1V/A Accuracy, up to 8A (70W max) 1. Find the correct voltage for your laptop from its power adaptor. Note: For more information visit our support page at 2. Set the voltage and amperage through the menu (You may also click DC Outlet Button to jump to Step 2) Step 1 DC OUT USB SCREEN OFF AUTO SHUT DOWN Step 2 Step V 7.5A OUT 59.3V 2.5A? 16.5V 8.0A Yes No 15.0V 8.0A Incorrect setting may harm your device. 12.0V 8.0A Note: Omnicharge keeps four preset voltages. Press and hold the power button while hovering over a preset to change the voltage. 3. DC icon will appear on the screen 4. Power your device through DC port & DC Output Cable (MR F). DC Adjustable DC output USB DC 3.05 W 100% W 28.2 C You can purchase additional cables from our website. For more information about available accessories, please visit 4

5 USB-A PORTS 5V/3A, 9V/2A, 12V/1.5A QC3.0 compatible 1. Choose whether the USB output is on or off when you turn on your Omnicharge DC OUT USB SCREEN OFF AUTO SHUT DOWN DEFAULT ON DEFAULT OFF USB-C INPUT/OUTPUT PORT 5V, 9V, 12V, 15V, 20V, up to 3A 60W max THE OMNICHARGE MAY BE RECHARGED IN A VARIETY OF WAYS DC Input 5-32V, 4.5A max, 90W max USB-C Input 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A, 60W max Charging from the Wall Use the included AC wall charger, or other power adapters like your laptop charger to recharge your Omnicharge. Note: Make sure the output voltage of your adapter falls within 5V - 32V range. Use our brand-specific DC input tip. Omnicharge can accept 5.5 x 2.1 mm barrel plugs. 5

6 PORTS AND BUTTONS Power and Menu Button 2. AC Outlet Button/Move Up 3. DC Outlet Button/ Move Down 4. AC Outlet DC Input Port 6. USB-A Ports 7. USB-C Input / Output Port 8. DC Output Port 6

7 BUTTON FUNCTIONS MAIN CONTROLS Long press to power on Quick press to turn screen display on/off On/Off AC outlet DC out settings MENU CONTROLS Double press to enter the menu Quick press to select Move Up Move Down SCREEN OLED screen with real time metrics W 100% 24.3 C 6 1. Battery Temperature 2. Total Output Wattage from the Battery 3. Total Input Wattage 4. Status Icons 5. Battery Percentage Remaining 6. Battery DC Output Voltage 2 1 7

8 MENU NAVIGATION DC OUT Turn on DC output and set the voltage USB Choose whether the USB output is On or Off when you turn on your Omnicharge. SCREEN OFF Set the OLED screen auto turn-off time here. The default setting is 1 min. AUTO SHUT OFF Choose whether or not your Omnicharge will automatically shut off. TEMPERATURE Choose Fahrenheit or Celsius here. ABOUT Find the Model Name, Capacity, Firmware Version Number and Serial Number here. 8

9 SCREEN ICON AC 120V/230V AC OUTPUT 120V/230V AC outlet is activated. DC ADJUSTABLE DC OUTPUT Adjustable 1V-24V DC is activated. USB OUTPUT USB ports are turned on. CHARGING INPUT Your Omnicharge is being charged. OPTIMAL CHARGING Omnicharge is being charged at maximum power. SOLAR CHARGING Omnicharge is being charged from solar power. 9

10 LOW TEMPERATURE PROTECTION Battery's temperature is too low and the charging circuit is shut off. OVERPOWER PROTECTION Your device is drawing too much power. Omnicharge will limit or cut off its output power. OVERHEATING PROTECTION Battery or circuit boards' temperature is too high. Omnicharge will limit or cut off its input and output power. OVERVOLTAGE PROTECTION Input voltage at the barrel port exceeds its 36V limit. Input charging circuit is shut off. POWER PROTECTION Low power protection is on. WHAT S IN THE BOX OMNI ULTIMATE, GREETING CARD DC OUTPUT CABLE (MR F), AC POWER ADAPTER, AC CABLE OPTIONAL: PROTECTIVE CASE, DJI CABLE, DC OUTPUT CABLE (MR ), MAGSAFE CABLE, SURFACE CABLE, USB-C POWER CABLE You can purchase additional cables from our website. For more information about available accessories, please visit 10

11 NOTICE: Using your Omnicharge When you re using your Omnicharge, it is normal for the surface to get warm. For prolonged use, place your Omnicharge on a flat, stable surface with adequate ventilation. When your Omnicharge s battery is low, please put it back in the power station for recharging. The configuration will be restored after recharging. Carrying Your Omnicharge If you carry your Omnicharge in a bag or briefcase, make sure there are no loose objects that could accidentally get inside the Omnicharge through airflow vents or get stuck inside a port. Storing Your Omnicharge If you are going to store your Omnicharge for an extended period of time, keep it in a cool location (ideally, 71 or 22 ) and charge the battery to 100%. When storing your Omnicharge for more than 5 months, charge the battery to 100% every six months. THANK YOU 11

12 CUSTOMER SUPPORT All Omnicharge products have gone through quality inspection. If you find your Omnicharge or any Omnicharge accessory is experiencing or demonstrating any abnormal behavior, immediately stop all product use and contact us at FOLLOW US Omnicharge. is a trademark of Omnicharge Inc. v.1.01