Vehicles > Road Vehicles > Heavy Duty Trucks > Vehicles marked DB Schenker. Regulations for heavy duty vehicles branded DB Schenker

Transcription

1 Regulations for heavy duty vehicles branded DB Schenker The logo is used worldwide in six standard sizes between 55cm and 560cm width. It is placed broadly on both vehicle sides (560cm or 450cm on trucks, and 210cm or 150cm on vans) and is always aligned to the rear of the vehicle. The logo is smaller on the rear but horizontally center aligned. In addition is the Internet address placed on the back of the vehicle using the color RAL9005. Two template sizes are available (4cm and 8cm xheight). Materials used should be sun and be weather resistant for at least 8 years. Download logo templates Here are templates available in all six standard sizes (full size files). The logos are delivered as Adobe Illustrator files (AI8) using the RAL color system (Traffic Red, RAL3020 and Deep Black, RAL9005). To view and work with the files is PostScript capable soft -and hardware required. The files are compressed (ZIP). The gray background of the images shown here is not part of the templates and only used to illustrate the file character. The 55cm version does exist with a white inner space for the use on silver cars. Download: Templates DB-SCHENKER_vehicles File format: ZIP File size: 4.5 MB Internet address The Internet address in black appears on the rear of all large vehicles with an x-height of 8cm set in DB Sans Bold. Vans carry the smaller version with an x-height of 4cm set in DB Sans Regular. The placement is regulated differently depending on vehicle type (see below). Download Internet address The templates for the URL are provided here in two file sizes at full size dimensions. Color specs and file format equals the logo files. Download: www_dbschenker_vehicles File format: ZIP File size: 1.6 MB Page 1

2 Side and rear panel marking The logo on the side panels is always aligned to the rear and the top of the vehicle. The distances to the pane borders are twice the distance of the DB brand to the lettering of the logo. The logo on the rear panel has the same distance as the side panels to the top of the pane. It is horizontally centered. The alignment of the URL varies with the vehicle model and is typically left aligned with the logo. It maintains a 28cm distance from the bottom. Page 2

3 Additional rear panel marking Next to the standard (logo und internet address (1), see also pic. above) are the following rear panel markings on trucks possible: additional tagline, placed below the logo (2) supplement with official product names (3) is allowed in exceptional cases only and needs beforehand approval from the CI/CD and Creation Department. Other markings or advertisements are allowed in exceptional cases only, e.g. campaigns, sponsoring, migration, etc., and only in agreement with the CI/CD and Creation department. Page 3

4 Markings on vehicle front and doors The logo is placed on the front (for example on the wind deflectors mostly 100cm wide) as well as the driver and passenger door (55cm wide) if the available space on the panes allow for these dimensions. On available front panes or wind deflectors is the logo centered. On the doors is the logo typically placed left aligned (respectively right aligned) to the side mirrors. It might be necessary to find a model specific solution if the space available for logo placement is limited. All such variants need to be coordinated with the CI/CD and Creation department and must be recorded. Application examples of all six standard logo sizes These links provide the respective template for download and examples of how the logos are placed on the vehicles. Size 560 Size 450 Size 210 Size 150 Size 100 Size 55 Page 4

5 Implementation according to Norm EC 104 Retroreflecting Markings on Heavy and Long Vehicles As of 2001 all new acquisitions of trailers and truck superstructions must be equipped according to EU norm with retro-reflective markings (contour markings). The following depicts examples of implementation on DB Schenker vehicles. Colors are used according to preset guidelines: Rear markings red, lateral markings silver (official color name is white). Guidelines stipulate that the rear markings run along all four edges. The lateral markings are corners in the upper areas, an unbroken line in the lower area. mandatory measure of length of corner stripes distance dimension rear view mandatory measure of length of corner stripes distance dimension rear view Page 5

6 Reflector strips Color: silver (or white*) lateral marking Reflector strips Color: red rear marking *manufacturer-specific published: Page 6