Indoor/Outdoor Security System with Quad Monitor User s Manual

Transcription

1 Indoor/Outdoor Security System with Quad Monitor User s Manual

2 Important! Please read this booklet carefully before installing or using these units. WARNING - These units should ONLY be opened by an authorized technician if service is required. Safety Precautions For correct and safe operation of this system, it is essential that installers, end-users and service technicians should follow all safety procedures outlined in this manual. Specific Warning and Caution statements (and/or symbols) are marked on the units where needed. Warning and Caution Statements WARNING indicates a situation where failure to follow proper procedures can cause personal injury. CAUTION indicates a situation where failure to follow proper procedures can cause damage to the equipment.

3 Basic Camera to 14 CRT Monitor installation 1. Unpack all parts from the packing box. 2. Install or mount the camera at the desired location. Do not place the camera directly into sunlight or high light. 3. Lead the DIN cord back to your television or monitor. NOTE: 1. To protect camera, do not expose to excessive dust or humidity. 2. Handle with care. Do not place in a location subject to vibration. 3. Do not place camera in a location subject to direct sunlight or high light. REMEMBER: Never aim camera directly into the sun. Camera to 14 CRT Monitor Installation Chart Front Panel 1. Horizontal synchronization 2. Brightness 3. Contrast 4. QUAD 5. AUTO SCAN (CAM1, CAM2, CAM3, CAM4, QUAD) The interval period for switching is every 4 seconds. 6. Single picture (1#) 7. Single picture (2#) 8. Single picture (3#) 9. Single picture (4#) 10. Power Rear Panel: 1. DC input 2. Video input (1#) 3. Video input (2#) 4. Video input (3#) 5. Video input (4#) 6. Video output 7. (1#) 6 pins plug 8. (2#) 6 pins plug 9. (3#) 6 pins plug 10. (4#) 6 pins plug) Ground DC 12V Video input CAUTION: A distorted picture will appear if the Video input and Din input are connected to the same channel (EX. CH 1 for Video input and CH1 for Din input) and to the same display at the same time. Please pay attention to the installation procedure before installing the system. 1

4 Steps 1. Press QUAD button, it will display QUAD picture. 2. Press down AUTO-SCAN button, the 4 images from Camera 1-4 including QUAD image will be automatically switched at rate of 4 sec one by one. 3. Press Camera 1-4 button, it will display corresponding full screen picture diagram of the selected camera. Note: A) The RCA video inputs can be connected with other types of cameras such as a camcorder or DVD for entertainment. B) The RCA video output can be connected to VCR for recording or to TV for larger screen display. Camera 1 Camera 4 Camera 2 Camera 3 Parts of the Camera A. Mounting bracket B. IR LED C. Camera Din Connector D. Camera Lens A BC DE AB DC 2

5 Installing and Connecting the Devices Select a suitable installation site from which you want to monitor the desired location. A suitable installation site must have the following features: Location must be located in a dry place As dust free as possible Little vibrations Good air circulation Must be located near a wall outlet in close vicinity Select a location that is not screened off by reinforced concrete walls, mirrors, metal shelves, etc. Close to the sender respectively receiver, there should not be any appliances with strong electric fields (eg. cell phones, walkie-talkies, electric engines, etc.). The above points could severely impair radio transmission respectively reduce the range. Fastening the wall bracket Din Jack to TV monitor Look for a suitable place for mounting (possibly with a socket) Screw the wall bracket with the supplied screws to a suitable wall or a suitable platform use dowels if relevant. Guide the tripod thread of the wall bracket into the thread hole of the camera and screw each of them to one another. Align the camera and screw the lateral locking bolt tight. 3

6 Specifications Camera 14 Monitor Operating Voltage N/A 18 V DC Tube 35cm, 14 diagonal B/W tube, 90 deflection Picture Element Brightness Video Output Level 5100 x 490 (NTSC) 628 x 562 (PAL) 0 Lux 1 Vp-p / 75 Ohm Video Input 1) 4 channel DIN looping input Composite video signal 1.0 Vp-p 74 Ohm or HI-Z 2) 4 channel input RCA looping Menu Control Brightness, Contrast, Vertical sync, Horizontal sync Image Sensor 1/4 b/w CMOS Power Consumption 1.3W (max) 30W Horizontal Resolution 300 TV lines >800 TV lines Scanning Linearity <5% Scanning Geometry <2% Image b/w b/w Over Scan 6% Loss Scan 5% Direct Current Change Yes Operating Temperature 14 F to 122 F (-10 C to +50 C) 32 F to 104 F (0 C to +40 C) Operating Humidity 10-90% Weight 502 oz (140g) 299 oz (8500g) Dimensions without antenna 4 x 1.5 x 1.5 inches 13 x 12 x 12 inches L x W x H (100 x 38 x 40mm) (335 x 298 x 298mm) Parts Included: B/W Monitor 1 x pc 2. Outdoor B/W Camera x 4 pcs ft (18m) Weatherproof cable x 4 pcs 4. Camera bracket x 4 pcs 5. 18V DC Power supply x 1 pc 4

7 Who is Providing This Warranty? Orbyx Electronics, LLC ( Orbyx ), as the distributor of this Nexxtech TM product (your Product ). What Does This Warranty Cover? This warranty covers defects in materials or workmanship in your Product under normal use and conditions. What is the Period of Coverage? This warranty covers your Product for 90 days from the original purchase date. Who Is Covered? This warranty covers the original consumer purchaser. Coverage terminates if you sell or otherwise transfer your Product. What Will We Do To Correct Problems? We will repair your Product or replace your Product with a new or reconditioned equivalent product, at our option. How Do You Get Service? Call Orbyx TOLL FREE at for instructions for obtaining warranty service from Orbyx s authorized service providers. Or, return your Product directly to the retail store from which you purchased the Product. When you obtain service for your Product, you must provide a purchase receipt (or other proof of the original purchase date) and a description of the defect(s). What Does This Warranty Not Cover? This warranty DOES NOT COVER: damage due to misuse, abuse, alteration, unauthorized repair, or accident (such as improper electrical current); damage due to acts of God (such as lightning) or other contingencies beyond our control; cosmetic damage; externally generated static, signal reception or antenna problems not caused by your Product; or batteries. This warranty also DOES NOT COVER, and in no case will we be liable for, any incidental damages (such as transportation costs to and from an authorized service provider, or loss of time) or consequential damages (such as costs of repairing or replacing other property which is damaged, including tapes, discs, speakers not included with your Product or other accessories, or external electrical systems) resulting from the use of your Product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Defacing the serial number, or using your Product for commercial or institutional purposes, voids this warranty. Are There Other Warranties? There are no express warranties other than those expressed herein. Neither the sales personnel nor any other person is authorized to make any other warranties or to extend the duration of any warranties. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY (AN UNWRITTEN WARRANTY THAT A PRODUCT IS FIT FOR ORDINARY USE), ARE LIMITED TO 90 DAYS. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. How Does State Law Apply? This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. ORBYX ELECTRONICS WARRANTY ORBYX Electronics warrants that this product will be free from defects in materials and workmanship for a period of ninety (90) days from the date of purchase. Within this period, simply take the product and your proof of purchase to any ORBYX Electronics store or dealer and the product will be repaired without charge for parts and labour. ORBYX Electronics reserves the right to charge for transportation. Any product which has been subject to misuse or accidental damage is excluded from this warranty. This warranty is only applicable to a product purchased through ORBYX Electronics company owned stores and dealers and to a product that is presented for repair in a country where ORBYX Electronics offers the product for sale. While this warranty does not confer any legal rights other than those set out above, you may have additional statutory rights which will vary under the laws of the various countries, states, province and other governmental entities in which ORBYX Electronics operates. This warranty is subject to all statutory rights you may have in the country of purchase. Distributed exclusively in the U.S. by Orbyx Electronics, LLC 501 South Cheryl Lane, Walnut, CA Imported in Canada for/importé au Canada pour Orbyx Electronics, Concord, Canada, L4K 4M3 Manufactured in China For product support please contact or