EL-5600 Multi Format Presentation Switch (including SDI) OPERATION MANUAL

Transcription

1 EL-5600 Multi Format Presentation Switch (including SDI) OPERATION MANUAL

2

3 DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document. CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice. COPYRIGHT NOTICE No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means electronic, mechanical, magnetic, optical, chemical, manual, or otherwise without express written permission and consent from CYP (UK) Ltd. Copyright 2011 by CYP (UK) Ltd. All Rights Reserved. Version 1.1 August 2011 TRADEMARK ACKNOWLEDGMENTS All products or service names mentioned in this document may be trademarks of the companies with which they are associated. 3

4 SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. Never spill liquid of any kind on or into this product. Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit. Do not attach the power supply cabling to building surfaces. Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged. Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it. To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit. REVISION HISTORY VERSION NO. DATE SUMMARY OF CHANGE v /07/2013 First release v /07/2013 Corrections 4

5 CONTENTS 1. Introduction Applications Package Contents System Requirements Features Operation Controls and Functions Front Panel Rear Panel Remote Control RS-232 Protocols RS-232 Commands OSD MENU Connection and Installation Specifications Technical Specifications Supported Input/Output Resolution Acronyms

6 1. INTRODUCTION The EL-5600 presentation switch is an advanced HDMI, PC, SDI, Composite, S-Video and Component switcher/scaler. This device can scale and switch input sources and display them via the HDMI and VGA/ HD outputs simultaneously with their associated audio signals at a wide range of output resolutions (up to 1080p or WUXGA reduced blanking). Audio can be de-embedded from HDMI and SDI input sources using the built-in Digital to Analogue audio converter (DAC), whilst analogue audio can also be converted to digital for ultimate flexibility in audio signal management. In addition, there is an SDI Loop Out for monitoring or extending the SDI input signal. Control is via the IR remote, RS-232, or via front panel buttons and includes an on-screen menu providing settings and system information. 2. APPLICATIONS Digital and analogue signal convergence Convert analogue video/audio signals for use with digital displays Integrate multiple sources and signal types to a single display in a Meeting room or Conference hall environment 3. PACKAGE CONTENTS EL-5600 Multi format switch Remote Control (CR-117) 15-pin D-Sub to 3 RCA adaptor cable Power Adaptor Operation Manual 4. SYSTEM REQUIREMENTS Source equipment such as Blu-ray players or SDI camera, VGA or HDMI display and amplifier/active speakers with connection cables. 6

7 5. FEATURES Supports HDMI, Composite Video, S-Video, PC (VGA)/HD (Component) and SDI inputs Supports HDMI and VGA/Component (with adaptor) outputs Supports SDI loop-through output Supports analogue stereo, optical and coaxial digital inputs and optical digital output, analogue stereo output or embedding to HDMI output Supports conversion of multiple video formats and audio input to HDMI or PC/HD and analogue stereo outputs Supports EDID and HDCP Supports 3D de-interlacing, noise reduction and 3D comb filter Supports frame rate conversion Supports RS-232, IR remote control, and front panel control Supports SDI Standards of SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M, SMPTE 259M-C Supports SDI bit rates at Gb/s, 2.970/1.001 Gb/s, Gb/s, 1.485/1.001 Gb/s and 270 Mb/s Supports SDI signal input and output distances of up to 300m for SD signals, 200m for HD signals and 100m for 3G signals Supports SDI Auto video mode detection (3G/SD/HD) Video functions: Aspect Ratio Adjustment / Video Noise Reduction / Underscan & Overscan Selection / De-Interlacing Note: SDI cable operating distance tested with belden 1694A cable. Operating distances may vary for cables of different specifications. 7

8 6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel CSLUX-300I DIGITAL VIDEO SCALER XGA POWER IR INPUT CV SV COMP PC HDMI 1 HDMI 2 SDI MENU - + ENTER 720P POWER & POWER LED: Press this button to switch the device on or to set it to standby mode. Once the device is connected to an active power supply the LED will illuminate and the device will switch on automatically. 2 IR Receiver window: Receives only the IR signal from the remote control included in the package. 3 INPUT button and LEDs: Press this button repeatedly to cycle through the input sources sequentially. An LED on the front panel will illuminate to indicate the selected input source. 4 MENU: Press this button to enter the OSD menu. 5 /+: Press these buttons to navigate up and down in the OSD menu. 6 ENTER: Press this button to confirm the selection in the OSD menu. Press this button simultaneously with the '+' (plus) button to instantly switch the output to XGA resolution or with the ' ' (minus) button to instantly switch the output to 720p resolution. 8

9 6.2 Rear Panel OUTPUT OPTICAL RS232 OPTICAL INPUT L/R SERVICE 1 SERVICE 2 L/R R L CV R L PC/HD SDI LOOP OUTPUT SDI PC DC 5V HDMI HDMI 1 HDMI 2 Cr/Pr Cb/Pb Y SV R L OUTPUT: L/R: Connect to an amplifier or active speakers for audio output in stereo format. HDMI: Connect to an HDMI display or amplifier for video and/or audio output. OPTICAL: Connect to an amplifier or active speakers for audio output in digital format. PC/HD: Connect to a monitor/display for video output. For HD (Component) output,use the supplied D-Sub 9pin to 3 RCA adaptor cable for HD resolutions from 480p~1080p. 2 SERVICE 1: Reserved for manufacturer use only. 3 SDI LOOP OUTPUT: Connect to an SDI display for monitoring of the SDI input signal or an SDI extender for extending the SDI signal to further areas. 4 RS-232: Connect to a PC/Laptop to use RS-232 commands to control the device (See Section 6.5 for details on RS-232 commands). 5 SERVICE 2: Reserved for manufacturer use only. 6 INPUT: SDI: Connect to an SDI camera or other SDI source for both video and audio signal conversion. HDMI 1: Connect to an HDMI source such as Blu-ray/DVD player for both video and audio signal conversion. HDMI 2: Connect to an HDMI source such as Blu-ray/DVD player for both video and audio signal conversion. 9

10 L/R: Connect to source's L/R output with 3.5mm mini-jack for audio signal conversion. PC/HD: Connect to a PC/Laptop source for video signal input with a D-Sub 15pin cable. OPTICAL: Connect to a source's optical output for audio signal conversion. YCbCr/HDPbPr + L/R: Connect to source equipment such as a DVD player for both video and audio signal conversion. CV + L/R: Connect to a composite video source such as video/dvd player for both video and audio signal conversion. SV + L/R: Connect to an S-Video source such as a video/dvd player for both video and audio signal conversion. 7 DC 5V: Plug the 5 V DC power supply into the unit and connect the adaptor to an AC outlet. 6.3 Remote Control 1 INPUT: Press this button repeatedly to cycle through the input sources sequentially. An LED on the front panel will illuminate to indicate the selected input source. 1 3 INPUT CV SV POWER PC HDMI 1 HDMI 2 SDI COMP 2 2 POWER: Press this button to switch the device on or to set it to standby mode. 4 EXIT MENU 5 3 CV/SV/COMP/PC/HDMI1/HDMI2/SDI: Direct source selection keys. Press one of these keys to switch to the selected source. 6 RESET OK AUTO ADJUST EXIT: Press this button to exit the menu or the current selection in the OSD menu. 5 MENU: Press this button to enter the OSD menu. CR RESET: Press this button to reset the device back into the default settings. 10

11 7 AUTO ADJUST: Press this button when the image being output does not correctly fit the display's screen. The device will auto adjust the image to fill the screen. 8 OK & : Press OK to confirm the selection or press the arrow buttons to navigate the OSD menu. 6.4 RS-232 Protocols EL-5600 Remote Control PIN Assignment PIN Assignment 1 NC 1 NC 2 Tx 2 Rx 3 Rx 3 Tx 4 NC 4 NC 5 GND 5 GND 6 NC 6 NC 7 NC 7 NC 8 NC 8 NC 9 NC 9 NC Baud Rate: 9600bps Data bit: 8 bits Parity: None Flow Control: None Stop Bit: 1 11

12 6.5 RS-232 Commands Command Description Contents S SOURCE 0~6 Select input source SDI(0) / HDMI1(1) / HDMI2(2) R SOURCE Inquire input source / YPBPR(3) / VIDEO(4) / SVIDEO(5)/ PC(6) S OUTPUT 1~25 Select output timing 640*480(1)/800*600(2)/ R OUTPUT Inquire output timing 1024*768(3)/1280*768(4)/ 1360*768(5)/1280*720(6)/ 1280*800(7)/1280*1024(8)/ 1440*900(9)/1400*1050(10)/1 680*1050(11)/ 1600*1200(12)1920*1080(13)/1 920*1200(16)/ 480p(17)/720p 60(18)/ 1080p 60(19)/ 1080i 60(20)/ 576p(22)/720p 50(23)/ 1080p 50(24)/ 1080i 50(25) S SIZE 0~6 Select output size OVERSCAN(0) / FULL(1) /BEST R SIZE Inquire output size FIT(2) / PAN SCAN(3)/LETTER BOX(4) /UNDER 2(5) / UNDER 1(6) S CONTRAST 0~60 R CONTRAST S BRIGHTNESS 0~60 R BRIGHTNESS S HUE 0~60 R HUE S SATURATION 0~60 R SATURATION S SHARPNESS 0~30 R SHARPNESS Contrast Setting Inquire contrast setting Brightness setting Inquire brightness setting Hue setting Inquire hue setting Saturation setting Inquire saturation setting Sharpness setting Inquire sharpness setting S NR 0~3 Noise reduction setting OFF(0) / LOW (1) / MIDDLE(2) R NR Inquire noise reduction / HIGH(3) setting 12

13 Command Description Contents S AUDIODELAY 0~3 Audio delay setting OFF(0) / 40ms (1) / 110ms(2) R AUDIODELAY Inquire audio delay setting / 150ms(3) S AUDIOMUTE 0/1 Audio mute setting ON(0) / MUTE(1) R AUDIOMUTE Inquire audio mute setting S SDIAUDIO 0~3 SDI Audio channel setting CH1CH2(0), CH3CH4(1) R SDIAUDIO Inquire SDI Audio channel CH5CH6(2), CH7CH8(3) setting S AUDIOSELECT 0/1 Audio Input setting ANALOG(0) / SPDIF(1) R AUDIOSELECT Inquire audio Input setting S KEY LOCK 0/1 Key lock setting ENABLE(0) / DISABLE(1) R KEY LOCK FW S RESET 1 Inquire key lock setting Firmware checking Pre-reset S POWER 0/1 Power Setting OFF (0) / ON (1) R POWER Inquire Power Setting EXIT Exit Note: 1. Audio delay is only supported on analogue L/R output. 2. When the HDMI input is encoded with HDCP, no image will be output from the PC/HD output. 3. Only LPCM 2 channel digital audio is supported, please ensure that the source audio is set to LPCM 2 channel audio in order to avoid unneccessary audio noise. 13

14 6.6 OSD MENU 1 st Layer 2 nd Layer 3 rd Layer 4 th Layer DISPLAY OUTPUT P P i p p p i p 50 SIZE (VIDEO mode only) OVER SCAN FULL BEST FIT PAN SCAN LETTER BOX UNDER 2 UNDER 1 MODE INFO OFF INFO ON PC (PC mode only) AUTO SETUP H_POSITION V_POSITION PHASE CLOCK WXGA/XGA XGA WXGA RESET

15 1 st Layer 2 nd Layer 3 rd Layer 4 th Layer COLOUR R G B R OFFSET G OFFSET B OFFSET CONTRAST 0~60 COLOUR BRIGHTNESS 0~60 HUE 0~60 SATURATION 0~60 SHARPNESS 0~30 NR. OFF LOW MIDDLE HIGH VOLUME 0~100 DELAY OFF 40ms 110ms 150ms SOUND ON MUTE AUDIO SDI AUDIO CH1 CH2 CH3 CH4 CH5 CH6 AUDIO SELECT (AV/SV/YPbPr/VGA only) FACTORY RESET KEY LOCK SETUP POWER SAVE INFORMATION INPUT OUTPUT REVISION Items in Bold are the default settings. CH7 CH8 ANALOG SPDIF OFF ON OFF ON

16 7. CONNECTION AND INSTALLATION HD Satelite Receiver SDI Camera PC or RS-232 Control System HDMI, Optical Digital and Analogue Audio Inputs Blu-ray/DVD Player SDI Input HDMI, Composite Video & Analogue Audio Inputs RS-232 Set-top Box OUTPUT L/R OPTICAL RS232 SERVICE 1 PC/HD HDMI INPUT OPTICAL SERVICE 2 SDI LOOP OUTPUT L/R SDI R L Cr/Pr Cb/Pb CV R L SV R L DC 5V PC HDMI 1 HDMI 2 Y PC VGA and Analogue Audio Inputs Analogue Audio Output Coaxial Digital Output AV Receiver 16 OR HDMI Output TV or Monitor VGA Output Component Output TV or Monitor with 3.5mm audio input SDI Loopthrough Output SDI Monitor

17 8. SPECIFICATIONS 8.1 Technical Specifications Input Ports 1 Composite,1 S-Video, 1 Component, 1 PC/HD, 2 HDMI, 1 SDI, 1 Optical, 4 Analogue Stereo (L/R), 1 USB (service only), 1xMini-jack (service only), 1xRS-232 (Control Only) Output Ports 1 HDMI, 1 PC/HD, 1 SDI (Loop out), 1 Optical, 1 Analogue Stereo (L/R) Supports Input Resolutions Up to UXGA & 1080p Supports Output Resolutions Up to WUXGA & 1080p Power Supply 5 V/3 A DC (US/EU standards, CE/FCC/ UL certified) Dimensions 320 mm(w) 182 mm(d) 44 mm(h) Weight 1600g Chassis Material Metal Silkscreen Colour Black Operating Temperature 0 C~40 C/32 F~104 F Storage Temperature 20 C~60 C/ 4 F~140 F Relative Humidity 20~90 % RH (non-condensing) Power Consumption 10.5 W 17

18 8.2 Supported Input/Output Resolutions Input Resolution CV/SV Component PC HDMI NTSC/PAL 480i/576i 480p/576p

19 Output Resolution PC/HD HDMI 480p/576p (HD) (HD) (HD) (HD)

20 9. ACRONYMS ACRONYM EDID HDCP HDMI HDTV OSD SDI USB VGA WUXGA COMPLETE TERM Extended Display Identification Data High-bandwidth Digital Content Protectionl High-Definition Multimedia Interface High-Definition Television On-screen Display (Menu) Serial digital interface Universal Serial Bus Video Graphics Array Wide Ultra Extended Graphics Array 20

21

22

23

24 CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA Tel: +44 (0) Fax: +44 (0) v1.01