-Preliminary- Ku-band PLL LNB - Internal Reference (L.O. Stability: ±1 ppm) - MODEL No. NJR2835U/36U/37U/39U series
|
|
|
- Matthew Roberts
- 5 years ago
- Views:
Transcription
1 -Preliminary- Ku-band PLL LNB - Internal Reference (L.O. Stability: ±1 ppm) - MODEL No. NJR2835U/36U/37U/39U series < Features > * Low Noise Figure Noise Figure: 0.8 db * Low DC Current Drain DC Current Drain: 200 ma * Small Size & Light Weight Weight: 260 g * RoHS Compliance < Line-Up > Model No. NJR2837U NJR2837UN NJR2839U NJR2839UN NJR2835U NJR2835UN NJR2836U NJR2836UN RF Frequency to 11.70GHz to GHz to GHz to GHz Local Frequency GHz GHz GHz GHz IF Connector 950 to 1,700 MHz 950 to 1,450 MHz 950 to 1,450 MHz Local Stability +/- 1 ppm IF Connector Power Supply +24 VDC (+12 to +24 VDC) Frequency Matrix NJR2837U/UN NJR2839U/UN NJR2835U/UN NJR2836U/UN GHz GHz GHz GHz GHz GHz GHz GHz Note: The contents of this sheet are subject to change without notice. Page: 1/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 1ppm)_NJR2835U/36U/37U/39U
2 Note: The contents of this sheet are subject to change without notice. Page: 2/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 1ppm)_NJR2835U/36U/37U/39U -Preliminary- Ku-band PLL LNB - Internal Reference (L.O. Stability: ±1 ppm) - MODEL No. NJR2835U/36U/37U/39U series < Specifications > Item Specifications Input Interface Waveguide, WR75 (with Groove) Output Interface, female (50 ohm) [Model No.: NJR2835UN/36UN/37UN/39UN], female (75 ohm) [Model No.: NJR2835U/36U/37U/39U] Noise Figure (Ta.: +25 C) 0.8 db typ., 1.0 db max. Linear Gain (Ta.: +25 C) 60 db typ., 55 db min. Local Stability +/-0.5 ppm (Ta.: -30 to +60 C) +/-1.0 ppm (Ta.: -40 to +60 C) L.O. Phase Noise -70 dbc/hz 100 Hz -80 dbc/hz 1 khz L.O. Leakage Level -25 dbm max. at the IF Output Connector -60 dbm max. at the RF Input Flange Spurious a) -140 dbm max. at input, Fixed frequency spur, unrelated to test CW signal (Measured at specified IF band). b) -55 dbc max. with test CW signal -10 dbm IF output (Measured at specified IF band). Input V.S.W.R. 2.5 : 1 typ. Output V.S.W.R. 2.3 : 1 max. Power Requirement +24 VDC (+12 to +24 VDC) Current Drain 200 ma max. Temperature Range (ambient) -40 to +60 C (operating), -40 to +80 C (storage) Dimension & Housing mm (L) x 40 mm (W) x 40 mm (H) ( without Interface Connectors ) [3.96" (L) x 1.57" (W) x 1.57" (H)] Weight 260 g [0.57 lbs]
3 Note: The contents of this sheet are subject to change without notice. Page: 3/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 1ppm)_NJR2835U/36U/37U/39U -Preliminary- Ku-band PLL LNB - Internal Reference (L.O. Stability: ±1 ppm) - MODEL No. NJR2835U/36U/37U/39U series < Outline Drawing > NJR2835U/36U/37U/39U F- type, fema le connec to r ⅠF / DC Powe r :+12 to +24VDC (113.5) WR-75 4-M 4 dep th 5 m in. Un i t: mm
4 Note: The contents of this sheet are subject to change without notice. Page: 4/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 1ppm)_NJR2835U/36U/37U/39U -Preliminary Ku-band PLL LNB - Internal Reference (L.O. Stability: ±1 ppm) - MODEL No. NJR2835U/36U/37U/39U series < Outline Drawing > NJR2835UN/36UN/37UN/39UN N- type, fema le connec to r ⅠF / DC Powe r :+12 to +24VDC (118.9) WR-75 4-M 4 dep th 5 m in. Un i t: mm
5 Ku-band PLL LNB - Internal Reference (L.O. Stability: ±3 ppm) - MODEL No. NJR2835S/36S/37S/39S series < Features > * Low Noise Figure Noise Figure: 0.8 db * Low DC Current Drain DC Current Drain: 200 ma * Small Size & Light Weight Weight: 260 g * RoHS Compliance < Line-Up > Model No. NJR2837S NJR2837SN NJR2839S NJR2839SN NJR2835S NJR2835SN NJR2836S NJR2836SN RF Frequency to 11.70GHz to GHz to GHz to GHz Local Frequency GHz GHz GHz GHz IF Connector 950 to 1,700 MHz 950 to 1,450 MHz 950 to 1,450 MHz Local Stability +/- 3 ppm IF Connector Power Supply +24 VDC (+12 to +24 VDC) Frequency Matrix NJR2837S/SN NJR2839S/SN NJR2835S/SN NJR2836S/SN GHz GHz GHz GHz GHz GHz GHz GHz Note: The contents of this sheet are subject to change without notice. Page: 1/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 3ppm)_NJR2835S/36S/37S/39S
6 Note: The contents of this sheet are subject to change without notice. Page: 2/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 3ppm)_NJR2835S/36S/37S/39S Ku-band PLL LNB - Internal Reference (L.O. Stability: ±3 ppm) - MODEL No. NJR2835S/36S/37S/39S series < Specifications > Input Interface Output Interface Item Noise Figure (Ta.: +25 C) Linear Gain (Ta.: +25 C) Local Stability L.O. Phase Noise L.O. Leakage Level Spurious Input V.S.W.R. Output V.S.W.R. Power Requirement Current Drain Temperature Range (ambient) Dimension & Housing ( without Interface Connectors ) [3.96" (L) x 1.57" (W) x 1.57" (H)] Weight 260 g [0.57 lbs] Specifications Waveguide, WR75 (with Groove), female (50 ohm) [Model No.: NJR2835SN/36SN/37SN/39SN], female (75 ohm) [Model No.: NJR2835S/36S/37S/39S] 0.8 db typ., 1.0 db max. 60 db typ., 55 db min. +/-2.5 ppm (Ta.: -30 to +60 C) +/-3.0 ppm (Ta.: -40 to +60 C) -70 dbc/hz 100 Hz -80 dbc/hz 1 khz -25 dbm max. at the IF Output Connector -60 dbm max. at the RF Input Flange a) -140 dbm max. at input, Fixed frequency spur, unrelated to test CW signal (Measured at specified IF band). b) -55 dbc max. with test CW signal -10 dbm IF output (Measured at specified IF band). 2.5 : 1 typ. 2.3 : 1 max. +24 VDC (+12 to +24 VDC) 200 ma max. -40 to +60 C (operating), -40 to +80 C (storage) mm (L) x 40 mm (W) x 40 mm (H)
7 Note: The contents of this sheet are subject to change without notice. Page: 3/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 3ppm)_NJR2835S/36S/37S/39S Ku-band PLL LNB - Internal Reference (L.O. Stability: ±3 ppm) - MODEL No. NJR2835S/36S/37S/39S series < Outline Drawing > NJR2835S/36S/37S/39S F- type, fema le connec to r ⅠF / DC Powe r :+12 to +24VDC (113.5) WR-75 4-M 4 dep th 5 m in. Un i t: mm
8 Ku-band PLL LNB - Internal Reference (L.O. Stability: ±3 ppm) - MODEL No. NJR2835S/36S/37S/39S series < Outline Drawing > NJR2835SN/36SN/37SN/39SN N- type, fema le connec to r ⅠF / DC Powe r :+12 to +24VDC (118.9) WR-75 4-M 4 dep th 5 m in. Un i t: mm Note: The contents of this sheet are subject to change without notice. Page: 4/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 3ppm)_NJR2835S/36S/37S/39S
9 < Features > * Low Noise Figure Noise Figure: 0.8 db * Low DC Current Drain DC Current Drain: 200 ma * Small Size & Light Weight Weight: 260 g * RoHS Compliance Ku-band PLL LNB - Internal Reference (L.O. Stability: ±10 ppm) - MODEL No. NJR2835H/36H/37H/39H series < Line-Up > Model No. NJR2837H NJR2837HN NJR2839H NJR2839HN NJR2835H NJR2835HN NJR2836H NJR2836HN RF Frequency to 11.70GHz to GHz to GHz Local Frequency GHz GHz GHz to GHz GHz IF Connector 950 to 1,700 MHz 950 to 1,450 MHz 950 to 1,450 MHz Local Stability +/- 10 ppm IF Connector Power Supply +24 VDC (+12 to +24 VDC) Frequency Matrix NJR2837H/HN NJR2839H/HN NJR2835H/HN NJR2836H/HN GHz GHz GHz GHz GHz GHz GHz GHz Note: The contents of this sheet are subject to change without notice. Page: 1/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 10ppm)_NJR2835H/36H/37H/39H
10 Note: The contents of this sheet are subject to change without notice. Page: 2/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 10ppm)_NJR2835H/36H/37H/39H < Specifications > Item Specifications Input Interface Waveguide, WR75 (with Groove) Output Interface, female (50 ohm) [Model No.: NJR2835HN/36HN/37HN/39HN], female (75 ohm) [Model No.: NJR2835H/36H/37H/39H] Noise Figure (Ta.: +25 C) 0.8 db typ., 1.0 db max. Linear Gain (Ta.: +25 C) 60 db typ., 55 db min. Local Stability +/-10 ppm (Ta.: -40 to +60 C) L.O. Phase Noise -70 dbc/hz 100 Hz -80 dbc/hz 1 khz L.O. Leakage Level -25 dbm max. at the IF Output Connector -60 dbm max. at the RF Input Flange Spurious a) -140 dbm max. at input, Fixed frequency spur, unrelated to test CW signal (Measured at specified IF band). b) -55 dbc max. with test CW signal -10 dbm IF output (Measured at specified IF band). Input V.S.W.R. Output V.S.W.R. 2.5 : 1 typ. 2.3 : 1 max. Power Requirement +24 VDC (+12 to +24 VDC) Current Drain 200 ma max. Temperature Range (ambient) -40 to +60 C (operating), -40 to +80 C (storage) Dimension & Housing mm (L) x 40 mm (W) x 40 mm (H) ( without Interface Connectors ) [3.96" (L) x 1.57" (W) x 1.57" (H)] Weight 260 g [0.57 lbs] Ku-band PLL LNB - Internal Reference (L.O. Stability: ±10 ppm) - MODEL No. NJR2835H/36H/37H/39H series
11 Ku-band PLL LNB - Internal Reference (L.O. Stability: ±10 ppm) - MODEL No. NJR2835H/36H/37H/39H series < Outline Drawing > NJR2835H/36H/37H/39H F- type, fema le connec to r ⅠF / DC Powe r :+12 to +24VDC (113.5) WR-75 4-M 4 dep th 5 m in. Un i t: mm Note: The contents of this sheet are subject to change without notice. Page: 3/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 10ppm)_NJR2835H/36H/37H/39H
12 Note: The contents of this sheet are subject to change without notice. Page: 4/4 Rev.02(Feb. 2009) Ku PLL LNB (Int. Ref. 10ppm)_NJR2835H/36H/37H/39H < Outline Drawing > NJR2835HN/36HN/37HN/39HN Ku-band PLL LNB - Internal Reference (L.O. Stability: ±3 ppm) - MODEL No. NJR2835H/36H/37H/39H series N- type, fema le connec to r ⅠF / DC Powe r :+12 to +24VDC (118.9) WR-75 4-M 4 dep th 5 m in. Un i t: mm
4400X Series. Orbital. X-Band Ext Ref LNB. MIL Spec MIL-STD A, 45 db internal filter LNB630S-500X-WN60-G12. Orbital Features: Orbital Specs:
Orbital 4400X Series X-Band Ext Ref LNB 4400X Series, X-Band Ext Ref LNB with Universal 12-hole gasket input isolator. MIL Spec MIL-STD-188-164A, 45 db internal filter How to order an Orbital 4400X Series
Orbital 4400X & 4400XI Series X-Band Ext Ref LNB
Orbital 4400X & 4400XI Series X-Band Ext Ref LNB 4400XI Series, X-Band Ext Ref LNB with Universal 12-hole gasket input isolator MIL Spec MIL-STD-188-164A, 45 db internal filter How to order an Orbital
Ku-band 2W (3W typ.) Transmitter Model No. NJT5037 Type 1 (N-type Female Input Connector) Model No. NJT5037F Type 2 (F-type Female Input Connector)
Ku-band 2W (3W typ.) Transmitter Model No. NJT5037 Type 1 (N-type Female Input Connector) Model No. NJT5037F Type 2 (F-type Female Input Connector) Specifications Rev.07M January 13, 2006 Copyright 2006
Orbital Ka-ISO. Ext Ref Ka LNB with integrated isolator. Orbital Research Ltd Marine Drive, White Rock, BC. Canada V4B 1A9
Orbital Ka-ISO Ext Ref Ka LNB with integrated isolator Orbital Research Ltd 14239 Marine Drive, White Rock, BC. Canada V4B 1A9 Part number generator Frequencies (GHz): LO Input Output Bandwidth 18.40F
HMC7056. Block Upconverters / HPA's. Typical Applications. General Description. Features. Functional Block Diagram
Typical Applications Features Compact Design Dual L Band Inputs Dual up conversion to ensure no phase inversion WR28 Output with Isolator PA Enable Digital Gain control Thermal Monitoring and Gain Compensation
OBSOLETE HMC7056. Block Upconverters / HPA's. Typical Applications. General Description. Features. Functional Block Diagram
Typical Applications Features Compact Design Dual L Band Inputs Dual up conversion to ensure no phase inversion WR28 Output with Isolator PA Enable Digital Gain control Thermal Monitoring and Gain Compensation
Orbital 694XA Series. Ka BAND EXTERNAL REFERENCE LNB with rear anchor posts. Wide range of Frequencies and Bandwidths LNB 1855R 1000 XA-WN60
Orbital 694XA Series Ka BAND EXTERNAL REFERENCE LNB with rear anchor posts Wide range of Frequencies and Bandwidths How to order an Orbital 694XA Series Ka Ext Ref LNB Frequencies (GHz): LO Input Output
HMC7053. Block Upconverters. Typical Applications. General Description. Features. Functional Block Diagram. Satellite communications.
Typical Applications Satellite communications Commercial Features Compact Design Dual L Band Inputs Dual Upconversion to ensure no phase inversion SMA(F) Input Connectors K(F) Output Connector Digital
ThinkRF D GHz RF Downconverter
Product Brochure and Technical Datasheet ThinkRF D2030 27-30 GHz RF Downconverter Extend your existing 3G/4G test equipment to 5G Features and Benefits Compact, low-power, portable and cost-effective Retain
Multiple Band Outdoor Block Up- and Downconverters
Multiple Band Outdoor Block Up- and Downconverters Vertical Mount Option RF IF LO Frequency Frequency Frequency Model Band (GHz) (MHz) (GHz) Number Block Upconverters 1 12.75 13.25 0.95 1.45 11.8 UPB2-WS-13.625
FREQUENCY CONVERTER. MULTIPLE OUTPUT WIDEBAND Ku AND Ka DOWNCONVERTERS. Narda-MITEQ FEATURES OPTIONS
MULTIPLE OUTPUT WIDEBAND Ku AND Ka DOWNCONVERTERS FEATURES Small weather resistant enclosure Automatic 5/10 MHz internal/external reference selection 10/100 Base-T Ethernet and RS-485/RS-422 remote control
FREQUENCY CONVERTER HIGH-PERFORMANCE OUTDOOR BLOCK UP AND DOWNCONVERTERS. Narda-MITEQ 1 FEATURES OPTIONS
FREQUENCY CONVERTER HIGH-PERFORMANCE OUTDOOR BLOCK UP AND DOWNCONVERTERS Standard Configuration Vertical Mount Option FEATURES Antenna mount, weatherproof to IP-65 Automatic 5/10 MHz internal/external
Wideband LNB: 2.4 GHz
Ka Multi-LO (Preset) Switchable LNB Wideband LNB: 2.4 Orbital Research Ltd 14239 Marine Drive, White Rock, BC. Canada V4B 1A9 Input bandwidth range 2.4 from to Multiple Input and Output ranges switchable
L-Band Block Upconverter
More Satcom-Converters and other Satcom-Products at www.work-satcom.com L-Band Block Upconverter C, X, Ku-Band SBU-Type Key features SBU-Type Adjustable attenuator (range: 0..20 db, 0.1 db step size) Local
MAXTECH, Inc. BRC-1000 Series. C-Band Redundant LNB Systems. Technology for Communications. System Block Diagrams
MAXTECH, Inc. Technology for Communications BRC-1000 Series C-Band Redundant LNB Systems Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic
Ku-Band Redundant LNB Systems. 1:1 System RF IN (WR75) TEST IN -40 db OFFLINE IN CONTROLLER. 1:2 System POL 1 IN (WR75) TEST IN -40 db POL 2 IN
BRK-1000 Series Ku-Band Redundant LNB Systems Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic means of switching to the spare upon
DUAL-, TRI- AND QUAD-BAND OUTDOOR BLOCK CONVERTERS
FEATURES Small weather resistant enclosure RS-422/RS-485 and 10/100 Base-T Ethernet remote control Output signal monitor port 30 db gain control Automatic 5/10 MHz internal/external reference selection
Modular Block Converter Systems
Modular Block Converter Systems The Modular Block Converter System eliminates system downtime and maximizes ease of repair by providing fully modular systems for up conversion or down conversion. Critical
FREQUENCY CONVERTER. MULTIPLE WIDEBAND Ku AND Ka UPCONVERTERS. Narda-MITEQ FEATURES OPTIONS
FREQUENCY CONVERTER MULTIPLE WIDEBAND Ku AND Ka UPCONVERTERS FEATURES Small weather resistant enclosure Automatic 5/10 MHz internal/external reference selection 10/100 Base-T Ethernet and RS-485/RS-422
Model 7330 Signal Source Analyzer Dedicated Phase Noise Test System V1.02
Model 7330 Signal Source Analyzer Dedicated Phase Noise Test System V1.02 A fully integrated high-performance cross-correlation signal source analyzer from 5 MHz to 33+ GHz Key Features Complete broadband
Ka-Band Outdoor Block Upconverters and Low-Noise Block Downconverters
R Back to Block/Fixed Tuned Converters Ka-Band Outdoor Block Upconverters and Low-Noise Block Downconverters Ka-BAND OUTDOOR BLOCK AND LOW-NOISE BLOCK Specifications Options Outline Drawings Phase Noise
Instruction Manual Model # Block Upconverter
Instruction Manual Model 2115-278# Block Upconverter August 2018, Rev. A MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
Inmarsat Downconverter Narrowband Downconverter
Visit us at www.w ork-microw ave.de Inmarsat Downconverter Narrowband Downconverter L-Band to 70/140 MHz S-Band to 725 MHz 140 MHz to 15 MHz Single Conversion Dual Channel Converters also available. These
HIGH-LINEARITY TRIPLE-BALANCED MIXERS T3-0838
HIGH-LINEARITY TRIPLE-BALANCED MIXERS T3-838 The T3-838 is a high performance mixer featuring LO/RF from 8 to 38 GHz and IF from MHz to GHz. As with all T3 mixers, this mixer offers unparalleled nonlinear
7000 Series Signal Source Analyzer & Dedicated Phase Noise Test System
7000 Series Signal Source Analyzer & Dedicated Phase Noise Test System A fully integrated high-performance cross-correlation signal source analyzer with platforms from 5MHz to 7GHz, 26GHz, and 40GHz Key
High Performance Outdoor Test Translators
Input Output LO Frequency Frequency Frequency Model (GHz) (GHz) (GHz) Number RF Transmit-Band to RF Receive-Band 5.85 6.425 3.625 4.2 2.225 DN-WS-6.1/3.9 5.85 6.65 3.4 4.2 2.45 DN-WS-6.25/3.8 6.725 7.025
DOUBLE-BALANCED MIXERS M1-0008
DOUBLE-BALANCED MIXERS M-8 Features LO/RF. to 8. GHz IF DC to. GHz 7. db Typical Conversion Loss Ultra-Broadband RF, LO, and IF Electrical Specifications - Specifications guaranteed from - to + C, measured
Ku-Band Redundant LNB Systems
Ku-Band Redundant LNB Systems BRK-1000 Series Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic means of switching to the spare upon
C-Band Redundant LNB Systems
C-Band Redundant LNB Systems BRC-1000 Series Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic means of switching to the spare upon
X-Band Redundant LNB Systems
X-Band Redundant LNB Systems BRX-1000 Series Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic means of switching to the spare upon
TRIPLE-BALANCED MIXERS M2-0250
TRIPLE-BALANCED MIXERS M2-2 Features LO/RF 2. to. GHz IF.4 to. GHz 1 db Typical Conversion Loss Ultra-Broadband RF, LO, and IF 2.4 mm Connectors Electrical Specifications - Specifications guaranteed from
HMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications
Typical Applications The is ideal for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Sensors Functional Diagram Features High
16W Ku-band Matchbox BUC
16W Ku-band Matchbox BUC MBB-KUS016 // MBB-KUE016 Field-Proven Performance Wavestream s Ku-band Matchbox Block Upconverter (BUC) offers unmatched efficiency and performance suitable for mobile SATCOM,
Instruction Manual Model BlockUpconverter
Instruction Manual Model 2115-55 BlockUpconverter June 2009 - Rev. 0 MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
MULTIBAND 1/3 RACK-MOUNTED
BLOCK CONVERTER FEATURES Cover multiple ITU Ku-Band regions and other combinations Automatic 5/10 MHz internal/external reference selection with a 0.1 Hz nominal bandwidth clean-up loop RS-485/RS-422 and
Emcore SITU2831 Externally Modulated RF Amplified Fiber Optic Transmitter and SIRU3000 Fiber Optic Receiver
PRELIMINARY Applications RF and microwave antenna signal distribution EW Systems Broadband delay-line and signal processing systems Frequency distribution systems Radar system calibration Phased array
***** MLMS Main Test Menu Final Test Data Summary *****
***** MLMS Main Test Menu Final Test Data Summary ***** Time: 9:35:57 AM Date: 10/17/2016 Frequency Step Size: 0.001 MHz External 100 MHz PLL Reference Frequency: 10.0 MHz Maximum RF Level (Min.): 11.0
SMS3000X Series Spectrum Analyzer
Data Sheet SMS3000X Series Spectrum Analyzer SMS3032X SMS3021X General Description SMS3000X series spectrum analyzer has a frequency range from 9 khz up to 2.1 GHz/3.2 GHz, it is light weight and small
SCR Series Synthesized Converters L, C, X, Ku, and DBS Bands
SCR Series Synthesized Converters L, C, X, Ku, and DBS Bands Key Features Three-Year Warranty Excellent Phase Noise Performance External 5 or 10 MHz Reference Input Network Interface RS-232/-422/-485 Serial
Features. = +25 C, IF= 100 MHz, LO= +13 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
Features Passive Double Balanced Topology High LO/RF Isolation: 48 db Low Conversion Loss: 7 db Wide IF Bandwidth: DC - GHz Robust 1,000V esd, Class 1C Typical Applications The is ideal for: Point-to-Point
Redundant LNB Systems
Redundant LNB Systems FEATURES DESCRIPTION RCP2-1200 Redundant Controller LNBK, Ku-Band 1:2 Redundant LNB Plate Assembly The LNB Series Low Noise Block Down Converter Systems provide the ultimate system
FREQUENCY CONVERTER 1/3 RACK-MOUNTED BLOCK CONVERTER. Narda-MITEQ FEATURES OPTIONS. Unit shown with Option 17. Unit shown without Option 17
1/3 RACK-MOUNTED BLOCK CONVERTER Unit shown with Option 17 Unit shown without Option 17 FEATURES Automatic 5/10 MHz internal/external reference selection with a 0.1 Hz nominal bandwidth clean-up loop Gain
GaAs DOUBLE-BALANCED MIXER
MM167LS The MM167LS is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation
1:1 and 1:2 Redundant Low-Noise Ka-Band Block Converter Systems
R Back to Block/Fixed Tuned Converters 1:1 and 1:2 Redundant Low-Noise Ka-Band Block Converter Systems 1:1 1:1 AND 1:2 REDUNDANT LOW- NOISE Ka-BAND BLOCK CONVERTER SYSTEMS Specifications Options 1:1 Diagram
SYNTHESIZED COMMUNICATION CONVERTERS
Dual-Conversion 1 khz or 125 khz Step Size SYNTHESIZED COMMUNICATION CONVERTERS 9600 SERIES 9400 SERIES MITEQ offers high-performance synthesized frequency converters in panel heights of 2 RU (9400 Series)
HMC576LC3B MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications
v2.514 Typical Applications The is suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram Features
Redundant LNB Systems
Redundant LNB Systems FEATURES DESCRIPTION RCP2-1200 Redundant Controller LNBK, Ku-Band 1:2 Redundant LNB Plate Assembly The LNB Series Low Noise Block Down Converter Systems provide the ultimate system
Redundant LNB Systems
Redundant LNB Systems FEATURES DESCRIPTION RCP2-1200 Redundant Controller LNBK, Ku-Band 1:2 Redundant LNB Plate Assembly The LNB Series Low Noise Bl ock Down Converter Systems provide the ultimate system
Redundant LNB Systems
FEATURES DESCRIPTION RCP2-1200 Redundant Controller LNBK, Ku-Band 1:2 Redundant LNB Plate Assembly The LNB Series Low Noise Bl ock Down Converter Systems provide the ultimate system reliability by providing
Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units
Features Passive: No DC Bias Required Input IP3: +2 dbm LO/RF Isolation: 3 db Wide IF Bandwidth: DC - 8 GHz Typical Applications The is ideal for: Telecom Infrastructure Military Radio, Radar & ECM Space
Amplifier Systems. 1:1, Dual 1:1 and 1:2 Redundant Low-Noise. Back to
R Back to Amplifier Systems 1:1, Dual 1:1 and 1:2 Redundant Low-Noise The 1:1, dual 1:1 and 1:2 redundant lownoise amplifier (LNA) systems are designed to ensure continuous operation without disruption
Key Features and functions. General Description
Technical Specification Summary Frequency Range 470 862MHz Typ. Gain 56 db P1dB 1400 W Typ. Efficiency >40 % @ 1dBcp Analogue TV 2400 Wps Temperature Range 0 to +45C DVB 290 Wrms Max VSWR 3:1 DTV 500 Wrms
SIR MICROWAVE WIDEBAND DSP RECEIVERS UP TO 26.5 GHz. WIDE FREQUENCY RANGE: GHz
SIR-4002 MICROWAVE WIDEBAND DSP RECEIVERS UP TO 26.5 GHz WIDE FREQUENCY RANGE: 0.5 26.5 GHz FEATURES Advanced Front Panel Alphanumeric Display High Dynamic Range: In band Input IP3 > 0 dbm, NF< 15 db DSP
Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units
Typical Applications The is ideal for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Wide IF Bandwidth: DC - 13 GHz Passive: No DC Bias
1/3 RACK-MOUNTED BLOCK CONVERTERS
AMPLITUDE SLOPE CONTROL Unit shown with option 17 Unit shown without option 17 FEATURES Automatic 5/10 MHz internal/external reference selection with a 0.1 Hz nominal bandwidth clean-up loop Gain control
6170 Shiloh Road Alpharetta, Georgia (770) FAX (770) Toll Free
Instruction Manual Model 2115-202 Upconverter November 2011, Rev. C MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz
Typical Applications Functional Diagram The HMC28AMS8 / HMC28AMS8E is ideal for: Base Stations PCMCIA Transceivers Cable Modems Portable Wireless Features Ultra Small Package: MSOP8 Conversion Loss: db
PXI MICROWAVE. Model PXI-1420
The PXI-1420 MW Downconverter Module is a PXI 3U, 1-slot downconverter module that, in conjunction with Local Oscillator Module PXI-1450B, converts microwave signals within the 2.75 to 26.5 GHz frequency
RS Pro SPECTRUM ANALYZER SSA3000X SERIES
Product Datasheet ENGLISH Stock No: 1236443 (RSSA3021X) 1236444 (RSSA3032X) RS Pro SPECTRUM ANALYZER SSA3000X SERIES Features and Benefits RSSA3032X XX RSSA3021X All-Digital IFTechnology Frequency Range
Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (GHz) LO drive level (dbm)
Page MMIQHSM The MMIQHSM is a miniaturized, surface-mount multi-octave.7. GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and power divider. It can be used
FM1200RTIM COMTECH TECHNOLOGY CO., LTD. 1. GENERAL SPECIFICATION. 2. STANDARD TEST CONDITION test for electrical specification shall be
1. GENERAL SPECIFICATION 1-1 Input Frequency Range 1-3 One Input Connector 1-4 Nominal Input Impedance 1-5 Tuning Circuit 1-6 IF Frequency 1-7 IF Bandwidth 1-8 Demodulation 1-9 Video Output Polarity 1-10
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
LEADER OF RF BROADBAND SOLTIONS Clarke & Severn Electronics Ph + Email sales@clarke.com.au www.clarke.com.au RFSPTA000GSB Absorptive Coaxial SPT Switch 0. - 0GHz Electrical Specifications, TA = + C, SB
SIDC-6003 MICROWAVE WIDEBAND DOWNCONVERTER / TUNER UP TO
SIDC-6003 MICROWAVE WIDEBAND DOWNCONVERTER / TUNER UP TO 26.5 GHz WIDE FREQUENCY RANGE: 0.5-26.5 GHz FEATURES High Dynamic Range Fast Switching Synthesizer with 10 Hz Tuning Resolution Excellent Phase
MENU EXECUTE Shiloh Road Alpharetta, Georgia (770) FAX (770) Toll Free
Instruction Manual Model 2016-1250 Downconverter May 2009 Rev A F=2501.750 G=+25.0 MENU MODEL 2016 DOWNCONVERTER CROSS TECHNOLOGIES INC. ALARM REMOTE POWER EXECUTE Data, drawings, and other material contained
SATCOM FIBER OPTIC PRODUCTS
INDOOR APPLICATIONS ONE THIRD RACK SATCOM FIBER OPTIC PRODUCTS CARD CAGE RACK OUTDOOR APPLICATIONS DC-POWERED L-BAND C-BAND LNA TABLE OF CONTENTS INDOOR EQUIPMENT Page One third rack links 2 One third
MICROLITHIC DOUBLE-BALANCED MIXER
M1-638 The M1-638 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
Applications protects low noise amplifiers and other devices from ESD or input power damage military, hi-rel applications
+12 to +3dBm Limiter 5Ω Broadband 3 to 3 MHz Maximum Ratings Operating Temperature -55 C to 1 C Storage Temperature -55 C to 1 C RF Power 2W Permanent damage may occur if any of these limits are exceeded.
MICROLITHIC DOUBLE-BALANCED MIXER
ML1-936 The ML1-936 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
R&S ZVA-Zxx Millimeter-Wave Converters Specifications
ZVA-Zxx_dat-sw_en_5214.2033.22_umschlag.indd 1 Data Sheet 13.00 Test & Measurement R&S ZVA-Zxx Millimeter-Wave Converters Specifications 28.01.2013 15:08:06 CONTENTS General information... 3 Definitions...
SIDC-6005 MICROWAVE WIDEBAND DOWNCONVERTER / TUNER UP TO
SIDC-6005 MICROWAVE WIDEBAND DOWNCONVERTER / TUNER UP TO 18 GHz WIDE FREQUENCY RANGE: 0.5-18 GHz FEATURES High Dynamic Range Fast Switching Synthesizer with 10 Hz Tuning Resolution Excellent Phase Noise
FMMX9004 DATA SHEET. Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm.
FMMX94 Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm FMMX94 is an I/Q double balanced millimeter-wave mixer module that operates across
FMMX9002 DATA SHEET. Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm.
FMMX92 Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm FMMX92 is an I/Q double balanced millimeter-wave mixer module that operates across
MICROLITHIC DOUBLE-BALANCED I/Q MIXER
MLIQ18 The MLIQ18 is a miniaturized, multi-octave 2-18 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either up
Synthesized Block Up- and Downconverter Indoor / Outdoor
Visit us at www.work-microwave.de Synthesized Block Up- and Downconverter Single / Dual / Triple Band Single / Dual Channel S-, C-, Ku-, K (DBS)-, Ka- and Q-band WORK Microwave s synthesized block converters
Converters Series Tri-Band Frequency Converters. Back to Multiband. Specifications Upconverters Downconverters Phase Noise Options Rear Panel
R Back to Multiband Converters 9700 Series Tri-Band Frequency Converters 9700 SERIES TRI-BAND FREQUENCY CONVERTERS The MITEQ frequency converters are designed for advanced satellite communication systems
1Chapter INTRODUCTION. This chapter describes the CST-5000 C-Band satellite terminal, referred to in this manual as the CST-5000 (Figure 1-1).
1Chapter 1. INTRODUCTION This chapter describes the CST-5000 C-Band satellite terminal, referred to in this manual as the CST-5000 (Figure 1-1). Figure 1-1. CST-5000 Single Thread System Rev. 9 1 1 1.1
10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B
Data Sheet FEATURES Passive; no dc bias required Conversion loss 8 db typical for 1 GHz to 18 GHz 9 db typical for 18 GHz to 26 GHz LO to RF isolation: 4 db Input IP3: 19 dbm typical for 18 GHz to 26 GHz
Features. Gain Variation Over Temperature db/ C
v4.3 MODULE,. - 5 GHz Features Typical Applications The Wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Gain:
MICROLITHIC DOUBLE-BALANCED MIXER
ML1-15 The ML1-15 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
Spectrum Analyzer 1.6 GHz 3 GHz HMS-X
Spectrum Analyzer 1.6 GHz 3 GHz 1 Basic Unit + 3 Options Your Spectrum Analyzer Key facts Frequency range: 100 khz to 1.6 GHz/3 GHz* 1 Spectral purity greater than -100 dbc/hz (at 100 khz) SWEEP from 20
MICROLITHIC DOUBLE-BALANCED MIXER
ML15 The ML15 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
GaAs MMIC Double Balanced Mixer
Page 1 The is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation
Series HSW and HSWM SPST & SPDT PIN Switches
Description The HSW and HSWM series of broadband PIN Diode switches cover frequency ranges from 18 to 65+ GHz. The HSW switches utilize a low loss finline structure with silicon or GaAs beam lead diodes,
Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (GHz) LO drive level (dbm)
MM-726HSM The MM-726HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation
MICROLITHIC DOUBLE-BALANCED I/Q MIXER
MLIQ-416 The MLIQ-416 is a miniaturized, multi-octave 4-16 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either
FMMX9000 DATA SHEET. Field Replaceable SMA IQ Mixer From 4 GHz to 8.5 GHz With an IF Range From DC to 3.5 GHz And LO Power of +15 dbm.
FMMX9 Field Replaceable SMA IQ Mixer From 4 GHz to 8.5 GHz With an IF Range From DC to 3.5 GHz And LO Power of +15 dbm FMMX9 is an I/Q double balanced millimeter-wave mixer module that operates across
1.5 GHz to 4.5 GHz, GaAs, MMIC, Double Balanced Mixer HMC213BMS8E
FEATURES Passive: no dc bias required Conversion loss: 1 db typical Input IP3: 21 dbm typical RoHS compliant, ultraminiature package: 8-lead MSOP APPLICATIONS Base stations Personal Computer Memory Card
High-Value 100 Series (Outdoor)
R Back to Synthesized/Tunable Converters High-Value 100 Series (Outdoor) HIGH-VALUE OUTDOOR COMMUNICATION CONVERTERS Specifications Outline Drawings Phase Noise System Diagram Control Accessories Options
R&S ZVA-Zxx Millimeter-Wave Converters Specifications
R&S ZVA-Zxx Millimeter-Wave Converters Specifications Data Sheet Version 19.00 CONTENTS Definitions... 3 General information... 4 Specifications... 5 Test port... 5 Source input (RF IN)... 5 Local oscillator
Features. = +25 C, As a Function of LO Drive
Typical Applications v.411 The is ideal for: Basestations, Repeaters & Access Points WiMAX, WiBro & Fixed Wireless Portables & Subscribers PLMR, Public Safety & Telematics Functional Diagram Features Passive
Power Amplifier 1.5 MHz to 18 GHz, Split Bands. Now with smart digital monitoring and control options 19 Rack Mount Family Data Sheet
General Description: These are wideband CW / Pulse Power Amplifiers, designed for pulse operation, and general-purpose, amplification. Using an advanced high power density LDMOS and GaN semiconductor processes,
HMC219AMS8 / 219AMS8E. Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz
Typical Applications The HMC219AMS8 / HMC219AMS8E is ideal for: UNII & HiperLAN ISM Microwave Radios Functional Diagram Features Ultra Small Package: MSOP8 Conversion Loss: 8.5 db LO / RF Isolation: 25
Synthesized Block Up- and Downconverter
Visit us at www.w ork-microw ave.de Synthesized Block Up- and Downconverter S, C, X, Ku, K, The satellite up- and downconverters developed and manufactured by WORK Microwave are designed to meet the requirements
MICROLITHIC DOUBLE-BALANCED MIXER
ML1-185 The ML1-185 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
R&S FS-Z60/75/90/110 Harmonic Mixers for the R&S FSP/FSU/ FSQ/FSUP/FSV
Test & Measurement Data Sheet 04.00 R&S FS-Z60/75/90/110 Harmonic Mixers for the R&S FSP/FSU/ FSQ/FSUP/FSV R&S FS-Z60/75/ 90/110 Harmonic Mixers At a glance The R&S FS-Z60/-Z75/-Z90/-Z110 harmonic mixers
MICROLITHIC DOUBLE-BALANCED I/Q MIXER
The is a miniaturized, multi-octave 185 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either up or downconversion.
Features. PFD Output Voltage 2000 mv, Pk - Pk. PFD Gain Gain = Vpp / 2π Rad khz 100 MHz Square Wave Ref.
HMC98LP5 / 98LP5E Typical Applications The HMC98LP5(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Functional Diagram Features Ultra
R&S HA-Z24E External Preamplifier 1 GHz to 85 GHz Specifications
R&S HA-Z24E External Preamplifier 1 GHz to 85 GHz Specifications Data Sheet Version 01.01 Definitions General Product data applies under the following conditions: Three hours storage at ambient temperature
Satellite Up- and Downconverter Indoor / Outdoor
Visit us at www.work-microwave.de Satellite Up- and Downconverter Indoor / Outdoor Single / Dual / Triple Band Single / Dual Channel S-, C-, X-, Ku-, K (DBS)-, Ka-, and Q-band WORK Microwave s satellite
ModuMAX SSPA Systems. C, X, and Ku Bands. Completely modular solid-state power amplifier systems for world-wide satellite communications
ModuMAX SSPA Systems C, X, and Ku Bands Completely modular solid-state power amplifier systems for world-wide satellite communications C-Band SSPAs 1500 Watts 1000 Watts 800 Watts X-Band SSPAs 1250 Watts