Affordable, Compact Multi-Format DME Switcher. Affordable compact DME switcher for live production

Transcription

1 DFS-900M 2D / 3D compact SD / HD video switcher Overview Affordable, Compact Multi-Format DME Switcher Affordable compact DME switcher for live production The DFS-900M is designed for live productions where there's no need or no budget for a large production switcher. Bursting with features in a small, ergonomic package, the DFS-900 makes it easy to interface with HD cameras and other studio equipment, with HD SDI available throughout. It is designed to work with a variety of input formats, including 3D signals. SD / HD operation Built-in resizers integrate HD and SD video feeds without external converters, and (with the optional DVI/Composite board) the DFS-900M can connect directly to computer and consumer sources Features Native HD and SD operation The DFS-900M works natively in HD for pristine quality productions but is equally at home with SD. It features a 1 or 1.5 ME control panel. Dual multi-viewer outputs DFS-900M includes two multi-viewer outputs production monitoring. This also means that fewer monitors are needed to monitor any production. It provides an overall cost reduction and makes it easier to set up and move. Easily integrate SD and HD material Built in up-converters make it easy to integrate SD and HD material without any need for external converters, a potentially significant cost saving. Provides up to 6 channels of DVE Up to 6 channels of powerful digital video effects, including non-linear transforms, are built-in to the DFS-900M. Chromakey as standard on all keyers Extensive keying including chromakey is standard on all keyers in the DFS-900M. Option for up to 24 inputs / 12 outputs The unit can be flexibly configured according to the user's needs and budgets. It is ideal for low-budget broadcast applications. Option for DVI and composite inputs / outputs 1

2 Computer and consumer products with DVI or composite signals are easily connected to the DFS-900M. 3D operation The DFS-900M, with the latest V2.0 software, also includes an easy 3D mode. By linking inputs and simultaneously mixing the PGM and aux bus 3D programmes can be produced as easily as a 2D production. Specifications General Power Requirements Power Consumpt ion Operat ing Temperat ure Dimensions (W x H x D) *1 Mass Video Format s Signal Processing 100 to 240 V AC, 50/60 Hz 400 W (when the maximum number of opt ional boards are inst alled) 5 C to 40 C 41 F to 104 F mm 17 3/8 5 1/4 17 5/8 inches Approx kg (excluding opt ional product s) Approx. 38 lb 2 oz (excluding optional product s) 1080/59.94i, 1080/50i, 720/50p, 720/59.94p, 480/59.94i, 576/50i 4:2:2:4 digit al component Input/Output Video Input Reference Input GPI Input Video Out put Reference Out put Remot e BNC (x8), 800 mvp-p, 75 Ω HD-SDI: Gbps or 1.485/1.001 Gbps SD-SDI: 270 Mbps The frame synchronizer funct ion is built in for all the inputs. BNC (x2), 75, loop-t hrough (An ext ernal 75- ohm terminator is required.) BB: NTSC Vp-p, PAL 0.45 Vp-p (Trilevel sync: ±0.3 Vp-p is available for HD mode.) D-sub 25-pin, (female), 16 input s BNC (x4), 800 mvp-p, 75 Ω HD-SDI: Gbps or 1.485/1.001 Gbps SD-SDI: 270 Mbps BNC (x1), 75 Ω BB: NTSC Vp-p, PAL 0.45 Vp-p (Trilevel sync: ±0.3 Vp-p is available for HD mode.) D-sub 9-pin (x3), (female) 2

3 Edit or Tally/GPI Out put Panel D-sub 9-pin, (female) D-sub 37-pin, (female), 32 out put s RJ-45 t ype Supplied Accessories Supplied Accessories Cont rol Cable *2 (1) Operating Instructions (1) Warrant y (1) Notes Note *[1] The values for dimensions are approximat e. *[2] A shielded cross cable complied wit h IEEE Et hernet 100BASE-TX st andards, for connection between the Processor Unit and Cont rol Panel. 3

4 Gallery 4

5 5

6 6