Light Delivery Systems for Optogenetics
|
|
- Prudence Dorsey
- 5 years ago
- Views:
Transcription
1 Product Catalog and Selection Guide August 2013 Edition Simply Brighter Solutions for Optogenetics Mightex Systems 2013 All Rights Reserved.
2 Introduction Optogenetics is a technology that allows targeted, fast control of precisely defined events in biological systems, by delivering optical control at the speed (millisecond scale) and with the precision (cell type specific) required for biological processing. Mightex has developed a range of Light Delivery Systems for optogenetics, as described below. Mightex s Light Delivery Solutions Overview (1) Fiber-Coupled LEDs for in vivo Optogenetics Fiber-coupled LEDs are capable of precisely delivering light to specific cell(s) of interest, without disturbing other cells in the vicinity. Moreover, multiwavelength fiber-coupled LEDs enable one to switch wavelengths (e.g. 470nm and 590nm) of the light delivered to the cell(s) through the same fiber, without the need of any mechanical movement or the need to physically switch fibers. This will allow fast excitation and fast inhibition of the cell(s). Mightex s FCS- and WFC-series fiber-coupled LED sources are designed for such in vivo optogenetics applications. Control Signals Manual Analog TTL Software - customer defined. LED Controllers SLA SLC-MA04-MU BLS-SAxx-US Fiber-Coupled LED s - with single or multiple LED s coupled into one (1) output fiber, without any moving parts in the optical path. Up to 8x LED s can be coupled into the same fiber. FCS-series WFC-series (Single LED) (Up to 4x LEDs) (Up to 8x LEDs) Interchangeable fiber (e.g. 50/100/200µm) Standard SMA Connector Rotary Joint Fiber-Optic Cannula 2
3 (2) Polygon400 Patterned Illuminators for ex vivo or in vitro Optogenetics For ex vivo or in vitro Optogenetics, microscopes are usually used in order to achieve the spatial resolution required to view individual cells, and patterned illuminators are needed in order to precisely control (i.e. activate/silence) the cells of interest without disturbing other cells within the microscope s Field of View (FoV). Mightex s Polygon400 Dynamic Spatial Illuminators are designed for such ex vivo and in vitro optogenetics applications. Control Signals LED Controller Light Sources Software/PC TTL BLS-PLxx-US LEDs Lasers Others * USB TTL Integrated/ Built-in Lightguide Fiber Coupling Mechanism Polygon400 Patterned Illuminators DSI-x-xxx... Φ ~ mm Φ ~ 100m Key Features: DLP based Patterned Illuminator; Simultaneous illumination of multiple areas of interest; Any custom-defined shape/size of illumination pattern; Microscope Adapters For Upright Microscopes For Inverted Microscopes Up to 4000 frames per second; USB2.0 interface, easy to install; TTL trigger input/output; Adapters for various microscopes; DSI-CUBE-xx-UA DSI-RING xx Built-in LEDs, or custom light sources via fiber or lightguide; Intuitive/powerful software for spatial/temporal/spectral control. 590nm 470nm Polygon400 on an Upright Microscope Polygon400 on an Inverted Microscope * A BLS-PLxx-US LED controller is only needed when an external LED source is used with the Polygon400. Integrated/built-in LEDs have their own integrated LED controllers. 3
4 Mightex s LED Sources Portfolio As far as optogenetics applications are concerned, LEDs are able to simultaneously meet both the speed (~ms) and the spatial precision (i.e. cell/neuron specific) requirements. Compared to lasers, LEDs excel in many respects: they are cheaper, smaller, more reliable, and easier to control. In addition, there are a wide range of LED wavelengths available in the market, making it easy to find the best wavelengths to interact (i.e. excite or inhibit) with neurons infected with various optogenetics tools, such as 470nm for channelrhodopsin (ChR2) and 590nm for halorhodopsin (NpHR). Mightex has developed the most comprehensive LED source solutions in the market. The chart below shows the wavelength portfolio of Mightex s LED s. In order to satisfy the specific needs of various customer applications, Mightex offers an extensive range of beam formats with our LED solutions, including collimated, uniform, focused, divergent, fiber-coupled, and lightguide-coupled LED sources. Microscope adapters are also available, in order to enable customers to mount the LED sources onto various microscopes. Please refer to the diagram below on how to choose the best beam format (and microscope adapters) for your specific applications. If you require multiple wavelengths for your application, Mightex also offers a range of multi-wavelength LED solutions, as below: (1) Wavelength-switchable LED's with collimated output beam (WLS-series). With an optional lightguide adapter, the output beam can also be coupled into a liquid lightguide; (2) Multi-wavelength fiber-coupled LED's (WFC-series); and (3) Multi-wavelength collimated LED's using beam combiners. With an optional lightguide adapter, the output beam can also be coupled into a liquid lightguide. Various microscope adapters are also available for those customer who would like to couple the LED light into microscopes. 4
5 LED Controllers In optogenetics research, scientists may have the need to control LED s in one or more of the following ways: (1) manually (e.g. with a turning knob); (2) with TTL pulses; (3) with analog signals; and (4) with software. Mightex has developed a range of LED controllers for this purpose, with detailed described below. (1) LED Controller Product Summary and Selection Guide Keys: Manual TTL Analog Software SLA SLC-MA04-MU SLC-AA02-US / SLC-AA04-US BLS-SA02-US / BLS-SA04-US Control Signals Number of Channels (per device) / 4 2 / 4 Minimum Pulse Width ~1ms 1ms 20s 20s Accepts TTL Input to Encode Output Pulse Pattern No No Yes Yes Accepts TTL Input to Trigger Pre-defined Pulse Pattern No No Yes Yes Manual Control via Turning Knobs Yes Yes No No Accepts Analog Input Control Yes No No No Software control via GUI / SDK No Yes Yes Yes Support Arbitrary Output Waveform/Pattern Via external analog input (0~5V) Via custom program based on SDK Easily definable via Mightex s software GUI / SDK Easily definable via Mightex s software GUI/SDK Note: (1) Each channel is capable of independently controlling an LED or a string of LEDs (all in sync with each other). For example, with a four (4)-channel LED controller, one can control up to four (4) LED s INDEPENDENTLY. If however one needed to control more than four (4) LED s, he could use multiple LED controllers. (2) SLA Manual and Analog LED Controller SLA SLA LED controller has two (2) channels, and each can be operated in one of the following two modes: - Manual Mode: The output current (in CW) can be adjusted manually via a turning knob, ranging between 0 and the Maximum Current stated below; - Analog Input Control Mode: The output current can be controlled via a 0~5V analog input. The maximum modulation frequency is ~1KHz. Each channel has a three (3) digit DIP switch (as shown in the picture on the right): the 1st digit is used to set the working mode, while the 2nd and 3rd digits are used to set the Maximum Current, which allows one to limit the maximum current that passes through the LED to match its current rating, in order to prevent LED damage due to overdriving. There are three (3) current limit settings: 350mA, 500mA and 1000mA, respectively. DIP Switches A B Parameters SLA Number of Channels 2 DIP Switch Setting Instruction A: Control Mode Setting B: Current Limit Setting Maximum Output Current (Settable via DIP Switches) Power Supply (provided by Mightex, 12V) Input Voltage, V dc 350mA / 500mA / 1000mA 9 ~ 24 V 1 Manual Mode 2 3 Imax = 350mA Maximum Output Voltage Analog Input Control Signal Dimensions Weight (V dc - 3.0) V 0~5 V 80mm (L) x 64.3mm (W) x 23.7mm (H) 60g 1 Analog Input Control Mode Imax = 500mA Imax = 1000mA Note: SLA is a UNIVERSAL LED controller designed to drive LED s of any made and model. It is NOT limited to just Mightex s LED s. 5
6 (3) SLC-MA04-MU Manual and Software LED Controller SLC-MA04-MU Mightex's SLC-MA04-MU four-channel universal LED controller is designed to drive a broad range of LED light sources, and it offers the flexibility for users to operate each LED channel independently, both manually and through software. The software comes with a user-friendly GUI that enables one to drive LEDs without the need to write any code. Furthermore, a full-featured SDK is provided in order for users to write their own software and to integrate the LED controller into their own systems. 1. Manual Mode: Each of the four channels can be operated manually in CW mode using a knob. The LED controller also has a fifth knob (i.e. a Global knob) that enables one to adjust the output current of all the channels at the same time and with the same step size. Therefore, one can first set the intensities for the LED s - independently - using the four (small) knobs, and then can increase/decrease the set intensities of all channels simultaneously using the Global knob. In order to prevent LED damage due to overdriving/overheating, the maximum output current of each LED channel can be set individually, via the software provided with the LED controller, to match the current rating of the LED connected to the channel. 2. Software Mode: In software control mode, each channel can be individually configured by the software to operate in one of the following three modes: To PC a. Disable Mode: The channel is disabled, and its output is completely turned off. b. Normal Mode (or CW Mode): The output current is constant, which can be adjusted (using software) from 0mA to 1,200mA through the USB interface. c. Strobe Mode: A Pulse-Width-Modulated (or PWM) periodic strobe pattern is output from the channel, which can be activated by a software trigger. The strobe pattern may last indefinitely or for a preset number of cycles, depending on the software setting. The maximum frequency of the PWM strobe is 500Hz. Parameters SLC-MA04-MU Number of Channels 4 Maximum Output Current (Settable via software) Power Supply (provided by Mightex, 12V) Input Voltage, V dc Maximum Output Voltage Minimum Pulse Width Timing Resolution Output Current Resolution Output Current Accuracy Output Current Repeatability Interface Up to 1200mA 12 ~ 24 V (V dc - 3.0) V 1ms 0.1ms 1mA ±5 ma or ±1.0%, whichever is larger ±2 ma or ±0.5%, whichever is larger USB2.0 Device Per Computer* 16 Dimensions Weight 180.5mm (L) x 180mm (W) x 34.5mm (H) 400g * The LED controller s software enables up to sixteen (16) SLC-MA04-MU LED controllers to be operated simultaneously by a single computer, leading to a maximum of 64 channels in total. Note: SLC-MA04-MU is a UNIVERSAL LED controller designed to drive LED s of any made and model. It is NOT limited to just Mightex s LED s. 6
7 (4) SLC-AA02-US and SLC-AA04-US LED Controllers with Software and TTL Triggering SLC-AA02-US or SLC-AA04-US Mightex's SLC-AA02-US and SLC-AA04-US universal LED controllers are designed to drive a broad range of LED light sources, and they enable one to operate each LED channel independently through software with a user-friendly GUI. Furthermore, a fullfeatured SDK is provided in order for users to write their own software and to integrate the LED controller into their own systems. The SLC-AA02-US and SLC-AA04-US LED controllers can also be controlled via TTL trigger pulses. There are two trigger modes (which are settable/selectable via the software): (1) one can pre-define a pulse sequence (or pattern) in software and load/save it to the LED controller s non-volatile memory, and a TTL pulse can then be used to trigger/activate the pre-defined pulse pattern; or (2) one can pre-set the output current (or the LED s intensity), and then use a train of TTL pulses to encode (the timing of) the LED s output pulse pattern. Since in the latter case, the LED s output pulse pattern strictly follows the input TTL pulse patter, it is also called Follower Mode. USB RS232 With an SLC-AA02-US or an SLC-AA04-US LED controller, one can use up to 128 pairs of [current (ma), duration (μs)] data points to define the 'shape' of the waveform. This will allow one to define an 'Arbitrary Waveform' for the LED driving current and consequently the LED's optical output. Details see diagram below. To PC Parameters SLC-AA02-US / SLC-AA04-US Number of Channels 2 / 4 Maximum Output Current (Settable via Software) Power Supply (provided by Mightex, default 12V) Input Voltage, V dc Maximum Output Voltage Minimum Pulse Width Timing Resolution Output Current Resolution 1000mA in CW mode 3500mA in strobe mode 12 ~ 24 V (V dc - 0.5) V Output Current Repeatability ±1mA (or +/-0.2%) Interface (Settable via a Flip Switch on the Back Panel) Arbitrary Waveform Definition Accepts TTL Trigger 20s 20s 1mA USB2.0 or RS232 Up to 128 points of [current (ma), time interval (s)] Device Per Computer* Up to 16 Dimensions Weight Yes 201mm(L) x 147mm (W) x 40mm (H) * The LED controller s software enables up to sixteen (16) SLC-MA04-MU LED controllers to be operated simultaneously by a single computer, leading to a maximum of 32 channels for SLC-AA02-US and 64 channels for SLC-AA04-US, respectively. Note: SLC-AA02-US and SLC-AA04-US are UNIVERSAL LED controllers designed to drive LED s of any made and model. They are NOT limited to just Mightex s LED s. 600g 7
8 (5) BLS-Series BioLED Light Source Control Modules BLS-SA02-US, BLS-SA04-US, BLS-PL02-US, and BLS-PL04-US Mightex BLS-series BioLED light sources are modularized fully-customizable turn-key solutions for optogenetics, fluorescence excitation, and other biophotonics applications. Precisely-timed and high-intensity light pulses are required in optogenetics experiments to activate channelrhodopsins (ChR2, ChR1 etc.) and halorhodopsins (NpHR) in order to excite and inhibit neurons. To meet these requirements, Mightex has developed a proprietary IntelliPulsing technology to allow BLS-series sources to output significantly higher power in pulse mode than what the LEDs are rated for in CW mode. (Front View) All standard Mightex LED light sources can be integrated into the BLS-series light source system. Furthermore, customers may choose optical heads with different wavelengths and formats to be integrated with the same control module. Multiple control modules can be stacked in software to support more than 4 optical heads. The control module features a linear LED driver design that eliminates light intensity ripples and oscillations often observed when low-cost buckpuck nonlinear drivers are used. Clean and highly repeatable pulses are critical to quantitative experiments. Both CW mode and pulse modes are supported. Time resolution of the control module is 20s and light intensity can be adjusted with 0.1% increments. Each driving channel on the control module has its own TTL trigger input. Rising edge, falling edge, and follower mode are supported in the trigger mode. (Back View) The control module can be operated without being connected to a computer. Once pulse sequences are programmed and stored into the control module (by user through software), the light source can operate alone without a computer. All it needs is a TTL trigger signal to output the user-programmed pulse sequences. Mightex BioLED light sources come with a Windows-based operation software featuring an intuitive yet powerful graphic user interface. A software development kit (SDK) is also provided for user integration into environment such as Labview and Matlab. (Back Panel) BLS-PLxx-US BioLED control modules are specifically designed to synchronize LED s with Mightex s Polygon400 Patterned Illuminators, in order to support synchronization between external LED s with custom pre-defined illumination patterns using external TTL trigger pulses. BLS-SA02-US BLS-SA04-US BLS-PL02-US BLS-PL04-US Synchronization with Polygon No Yes Number of channels Output Intensity Resolution 0.1% Time Resolution External Trigger Trigger Connector Optical (LED) Head Connector Host Interface On-Device Memory 20s TTL BNC 2-pin Aero Connector USB2.0 or RS232, selectable Yes Device Per Computer* Up to 16 Dimensions Weight 213mm (L) x 156mm (W) x 73mm (H) 800g * The LED controller s software enables up to sixteen (16) BioLED controllers to be operated simultaneously by a single computer, leading to a maximum of 32 channels for BLS-SA02-US and 64 channels for BLS-SA04-US, respectively. 8
9 Fiber-Coupled LED Sources Mightex has developed two (2) catogories of fiber-coupled LED sources: (1) FCS-series single-wavelength fiber-coupled LED s; and (2) WFC-series multiwavelength fiber-coupled LED s. This section describes the fiber-coupled LED selection guide as well as the detailed specifications of the LED sources. (1) Fiber-Coupled LED Product Summary and Selection Guide Features FCS-Series WFC-Series Number of Wavelengths/LEDs 1 Up to 8 Wavelength Range (nm) 240~940nm, or white LEDs 240~940nm, or white LEDs Output Fiber Interchangeable (e.g. 50/100/200µm etc.) Interchangeable (e.g. 50/100/200µm etc.) Fiber Connector SMA SMA Note: For wavelength availability, please refer to Mightex s LED wavelength portfolio. (2) FCS-Series Single-Wavelength Fiber-Coupled LEDs Mightex FCS-series single-wavelength fiber-coupled LED light sources employ the latest high-power LED technologies and a proprietary coupling optics to achieve maximum optical output power. Optical output is coupled into a fiber through a standard SMA fiber adaptor port (SMA fiber patch cords are sold separately). FCS series also features a locking electrical connector for secured connection. The onepiece machined housing features multiple mounting holes. All Mightex LED controllers can be used to drive the FCS-series light sources. FCS - -XXX Wavelength Code (Refer to table below) Configuration Code (default: 000 ) Interchangeable fiber SMA connector For example, FCS is a 470nm fiber-coupled LED with an SMA fiber connector. For optogenetics applications, light intensity (i.e. power per unit area, in mw/mm2) is a more important measure than light power (mw) itself. The table below summarizes the output power (mw) and the intensity mw/mm^2) of typical Mightex s FCS-series single-wavelength fiber-coupled LED s. Peak Wavelength (nm) 1 Description Wavelength Code Output Power (mw) 2 Intensity (mw/mm^2) 365 UV 365nm UV 385nm nm nm Royal Blue Blue Cyan Green Amber Red-Orange Red Deep red Deep Red NIR NIR NIR NIR NIR Output power measured here! Note: (1) Other wavelengths and white LED s are also available; (2) Output power measured at the output tip of a 200µm 0.39NA fiber. Higher output power can be obtained under certain conditions and in Intellipulsing mode with a BLS-SA02-US or a BLS-SA04-US BioLED control module. Please sales@mightex.com or call for details. Related Products: LED Controllers: SLA , SLC-MA04-MU, SLC-AAxx-US, BLS-SAxx-US Fiber Patch Cords: FPC SMA, FPC SMA, FPC SMA, FPC SMA 9
10 (3) WFC-Series Multiwavelength Fiber-Coupled LEDs Mightex s WFC-series multi-wavelength fiber-coupled light sources are enabled by the latest LED technologies and Mightex s proprietary beam combining/coupling optics. Up to eight (8) LEDs are coherently combined into a single multi-mode fiber with the highest efficiency practically possible. Optical output is coupled into a fiber through a standard SMA fiber adaptor port, and customers can use fibers with different core diameters with the WFC module. Each LED in the module can be powered individually or simultaneously, making the WFC-series a new class of light sources with a tunable spectrum. Up to 4x LED s Up to 8x LED s In optogenetics, for example, one might want to launch 470nm to excite ChR2 in a neuron, and then fast (in sub-ms) switch to 590nm to activate NpHR in order to inhibit the same neuron. This can be achieved by using a WFC-H which enables sub-ms switching between 470/590nm through the same fiber, and this can all be done electronically (through software) and there is no need for any mechanical movement. WFC - X N - XXXX - XXXX -... XXXX - XXX S - Standard configuration H - High-power configuration Number of wavelengths 1st Wavelength code 2nd Wavelength code (repeat if applicable) N-th Wavelength code Internal use For example, WFC-H is a high-power configuration WFC light source with 4 wavelengths of 400nm, 470nm, 590nm, and 656nm. Output power measured here! Wavelength 1 (nm) Wavelength Code Output Power 2 (mw) / Intensity (mw/mm^2) 2-wavelength 3-wavelength 4-wavelength 5-8 wavelength mW (120mW/mm^2) 3.6mW (115mW/mm^2) 3.4mW (108mW/mm^2) 3.1mW (98 mw/mm^2) mW (120mW/mm^2) 3.6mW (115mW/mm^2) 3.4mW (108mW/mm^2) 3.1mW (98mW/mm^2) mW (110mW/mm^2) 3.3mW (105mW/mm^2) 3.1mW (100mW/mm^2) 2.8mW (90mW/mm^2) mW (40mW/mm^2) 1.2mW (38mW/mm^2) 1.1mW (35mW/mm^2) 1.0mW (33mW/mm^2) mW (140mW/mm^2) 4.2mW (133mW/mm^2) 4.0mW (128mW/mm^2) 3.5mW (113mW/mm^2) mW (150mW/mm^2) 4.5mW (143mW/mm^2) 4.2mW (135mW/mm^2) 3.8mW (123mW/mm^2) mW (70mW/mm^2) 2.0mW (65mW/mm^2) 2.0mW (63mW/mm^2) 1.8mW (58mW/mm^2) mW (60mW/mm^2) 1.8mW (58mW/mm^2) 1.7mW (55mW/mm^2) 1.5mW (48mW/mm^2) mW (33mW/mm^2) 0.9mW (30mW/mm^2) 0.9mW (30mW/mm^2) 0.9mW (28mW/mm^2) mW (130mW/mm^2) 3.8mW (123mW/mm^2) 3.7mW (118mW/mm^2) 3.3mW (105mW/mm^2) mW (153mW/mm^2) 4.6mW (148mW/mm^2) 4.3mW (138mW/mm^2) 3.9mW (125mW/mm^2) mW (130mW/mm^2) 3.8mW (123mW/mm^2) 3.7mW (118mW/mm^2) 3.3mW (105mW/mm^2) mW (60mW/mm^2) 1.8mW (58mW/mm^2) 1.7mW (55mW/mm^2) 1.5mW (48mW/mm^2) mW (80mW/mm^2) 2.4mW (75mW/mm^2) 2.3mW (73mW/mm^2) 2.0mW (65mW/mm^2) mW (60mW/mm^2) 1.8mW (58mW/mm^2) 1.7mW (55mW/mm^2) 1.5mW (48mW/mm^2) mW (80mW/mm^2) 2.4mW (75mW/mm^2) 2.3mW (73mW/mm^2) 2.0mW (65mW/mm^2) Note: (1) Other wavelengths and white LED s are also available; (2) Output power measured at the output tip of a 200µm 0.39NA fiber. Higher output power can be obtained under certain conditions and in Intellipulsing mode with a BLS-SA02-US or a BLS-SA04-US BioLED control module. Please sales@mightex.com or call for details. Related Products: LED Controllers: SLA , SLC-MA04-MU, SLC-AAxx-US, BLS-SAxx-US Fiber Patch Cords: FPC SMA, FPC SMA, FPC SMA, FPC SMA 10
11 Polygon400 Spatiotemporal Patterned Illuminators for Optogenetics DSI- x- xxxx- xxxx- xxxx- xxx I - with built-in LEDs G - with fiber/lightguide input 1 st wavelength code 2 nd wavelength code 3 rd wavelength code Reserved for internal use Not applicable for lightguide/fiber based Polygon models For example, DSI-I is a Polygon400 module with two built-in LED sources: 470nm and 590nm. DSI-G-000 is a Polygon400 module with a lightguide as input light source. Spatially patterned illumination with temporal and spectral control enables numerous new techniques in life-science applications such as optogenetics. For example, in optogenetics, selected neurons in a specimen slice can be activated or silenced with a user defined illumination pattern. Mightex Polygon400 multi-wavelength dynamic spatial illuminator (DSI) integrates the state-of-the-art spatial light modulators and high-power LEDs using a proprietary Etendue-preserving optical design to deliver high-intensity illumination patterns with diffractionlimited resolution. A Texas Instruments DLP spatial light modulator is used to display a user defined image pattern. At the heart of the Polygon400 is a unique optical system that carefully delivers light from LED sources to the DLP panel and then through a microscope to the specimen plane. Such a systematic approach makes it possible to achieve maximum optical intensity while maintaining diffraction-limited imaging performance. Temporal performance is a key to many intended applications for Polygon400. With a frame rate of more than 4,000 fps and fastswitching LEDs, Mightex Polygon400 can deliver illumination patterns with micro-second precision. Advanced DSI models with external LED controllers also enable wavelength switching in between illumination patterns at the highest frame rate. A dedicated software allows users to generate illumination patterns as well as control illumination intensity and timing. The software also supports alignment between illumination patterns and images acquired through any digital cameras on a microscope. Projection Area Projection Area (FOV) and Pixel Resolution (at 1X magnification) Common Microscopes Leica Nikon Olympus Zeiss Height (mm) Width (mm) Diagonal (mm) Pixel size (m) Note: To calculate illumination area and pixel resolution at the specimen, simply divide the above numbers by the magnification of the objective. For example, under a 10x objective on an Olympus microscope, the illumination area will be 0.78mm x 1.39mm with a pixel resolution of 1.62m. Available LED Wavelengths, and Output Power and Intensity in Pattern Sequence Mode Wavelength (nm) Output Power 1 (mw) Intensity (mw/mm^2) These are estimated power at specimen under a 20x 0.75NA Olympus objective. System and communication USB2.0 interface. 5Vdc 3A input power. Windows 7 (recommended), Windows XP Service Pack 2 or greater Screen resolution of 1366x768 or higher 11
12 Polygon400 Spatiotemporal Patterned Illuminators for Optogenetics (Cont d) Control and Timing Parameters Minimum Maximum Unit Allowed bitmap depth 1 8 bit Exposure 1bit s Frame 1bit /sec Exposure 4bit s Frame 4bit 625-1/sec Exposure 8bit s Frame 8bit 120-1/sec Input trigger TTL, BNC connector - Input trigger delay TBD TBD s Output trigger TTL, BNC connector - Output trigger delay TBD TBD s Mightex Polygon400 is designed to be easily inserted into the infinity path of a microscope. For inverted microscopes, the preferred inserting point is usually the back port of the microscope where a fluorescence attachment is commonly placed. A filter cube is required to fold the Polygon400 s light path into the microscope. The filter cubes used for fluorescence observation serves this purpose well. For upright microscopes we provide a beam combiner cube to be inserted below the binocular/ trinocular unit. The dichroic or mirror in the beam combiner directs the Polygon400 beam into the microscope light path. (Left - Polygon400 beam combiner cube for upright microscopes; and, right - adapter ring for inverted microscopes.) Polygon400 Adapters for Microscopes Leica Nikon Olympus Zeiss Upright DSI-CUBE-LC-UA DSI-CUBE-NK-UA DSI-CUBE-OL-UA DSI-CUBE-ZS-UA Inverted DSI-RING-NK-TI TBD DSI-RING-OL-IA TBD 12
Fiber-coupled light sources
Optogenetics catalog 7.4 - Fiber-coupled light sources 9 Fiber-coupled light sources The fiber optic circuits are driven by light and hence the need to couple the light sources into the optical fiber.
More informationPRODUCT GUIDE CEL5500 LIGHT ENGINE. World Leader in DLP Light Exploration. A TyRex Technology Family Company
A TyRex Technology Family Company CEL5500 LIGHT ENGINE PRODUCT GUIDE World Leader in DLP Light Exploration Digital Light Innovations (512) 617-4700 dlinnovations.com CEL5500 Light Engine The CEL5500 Compact
More informationPlexBright LED Optogenetic Stimulation System
PlexBright LED Optogenetic Stimulation System Introduction Laser-based light sources were the first to make inroads in in vivo optogenetic experimentation, due to their capability of delivering high levels
More informationCBF500 High resolution Streak camera
High resolution Streak camera Features 400 900 nm spectral sensitivity 5 ps impulse response 10 ps trigger jitter Trigger external or command 5 to 50 ns analysis duration 1024 x 1024, 12-bit readout camera
More informationX-Cite XLED1. Advanced LED Illumination for Fluorescence Microscopy. Resetting the standard for LED illumination
Advanced LED Illumination for Fluorescence Microscopy X-Cite XLED1 Resetting the standard for LED illumination Optimized excitation with high power LED illumination at the sample plane Instant switching
More informationOPTICAL POWER METER WITH SMART DETECTOR HEAD
OPTICAL POWER METER WITH SMART DETECTOR HEAD Features Fast response (over 1000 readouts/s) Wavelengths: 440 to 900 nm for visible (VIS) and 800 to 1700 nm for infrared (IR) NIST traceable Built-in attenuator
More informationDPD80 Infrared Datasheet
Data Sheet v1.4 DPD8 Infrared DPD8 Infrared Datasheet Resolved Inc. www.resolvedinstruments.com info@resolvedinstruments.com 217 Resolved Inc. All rights reserved. DPD8 Infrared General Description The
More informationDPD80 Visible Datasheet
Data Sheet v1.3 Datasheet Resolved Inc. www.resolvedinstruments.com info@resolvedinstruments.com 217 Resolved Inc. All rights reserved. General Description The DPD8 is a low noise digital photodetector
More informationIMAGING GROUP. * With dual port readout at 16MHz/port Detector shown with a C-mount nose and lens, sold separately
The from Princeton Instruments is the ultimate scientific, intensified CCD camera (ICCD) system, featuring a 1k x 1k interline CCD fiberoptically coupled to Gen III filmless intensifiers. These intensifiers
More informationGFT Channel Digital Delay Generator
Features 20 independent delay Channels 100 ps resolution 25 ps rms jitter 10 second range Output pulse up to 6 V/50 Ω Independent trigger for every channel Fours Triggers Three are repetitive from three
More informationFeatures of the 745T-20C: Applications of the 745T-20C: Model 745T-20C 20 Channel Digital Delay Generator
20 Channel Digital Delay Generator Features of the 745T-20C: 20 Independent delay channels - 100 ps resolution - 25 ps rms jitter - 10 second range Output pulse up to 6 V/50 Ω Independent trigger for every
More informationSPATIAL LIGHT MODULATORS
SPATIAL LIGHT MODULATORS Reflective XY Series Phase and Amplitude 512x512 A spatial light modulator (SLM) is an electrically programmable device that modulates light according to a fixed spatial (pixel)
More informationTHE NEW LASER FAMILY FOR FINE WELDING FROM FIBER LASERS TO PULSED YAG LASERS
FOCUS ON FINE SOLUTIONS THE NEW LASER FAMILY FOR FINE WELDING FROM FIBER LASERS TO PULSED YAG LASERS Welding lasers from ROFIN ROFIN s laser sources for welding satisfy all criteria for the optimized laser
More informationMosaic. Mosaic Real Time Parallel Illumination of Multiple Regions. Features and Benefits. DMD Technology. Specifications Summary
Active Illumination Features and Benefits Unlimited flexibility in shape, size and complexity of illumination mask Simultaneous illumination of multiple regions of interest Precise illumination of areas
More informationLight Generation & Control Beam Splitters/Combiners Beam Modifiers Rotary Joints Patch Cords Cannulas In vitro and In vivo
Contents Light Generation & Control 11 LED Illumination............................................ 11 Laser Diode Illumination........................................ 18 Ce:YAG Fluorescent Illumination..................................
More informationIndustrial Diode Laser (IDL) System IDL Series
COMMERCIAL LASERS Industrial Diode Laser (IDL) System IDL Series Key Features Round, top-hat beam profile for uniform power distribution Warranted for full rated power in either pulsed or continuous wave
More informationDynamic IR Scene Projector Based Upon the Digital Micromirror Device
Dynamic IR Scene Projector Based Upon the Digital Micromirror Device D. Brett Beasley, Matt Bender, Jay Crosby, Tim Messer, and Daniel A. Saylor Optical Sciences Corporation www.opticalsciences.com P.O.
More informationUser Guide. PlexBright LD-1 Single Channel LED Driver. Part of the PlexBright Optogenetic Stimulation System
User Guide Document Issue 1.2 February 2017 PlexBright LD-1 Single Channel LED Driver Part of the PlexBright Optogenetic Stimulation System Plexon Inc 6500 Greenville Avenue, Suite 700 Dallas, Texas 75206
More informationMajor Differences Between the DT9847 Series Modules
DT9847 Series Dynamic Signal Analyzer for USB With Low THD and Wide Dynamic Range The DT9847 Series are high-accuracy, dynamic signal acquisition modules designed for sound and vibration applications.
More informationSpatial Light Modulators XY Series
Spatial Light Modulators XY Series Phase and Amplitude 512x512 and 256x256 A spatial light modulator (SLM) is an electrically programmable device that modulates light according to a fixed spatial (pixel)
More informationModel 4700 Photodiode Characterizer
Model 4700 Photodiode Characterizer Complete PD Measurement system The 4700 Photodiode Characterizer is a complete photodiode test system. It will characterize PDs or APDs (upcoming) without the need for
More information013-RD
Engineering Note Topic: Product Affected: JAZ-PX Lamp Module Jaz Date Issued: 08/27/2010 Description The Jaz PX lamp is a pulsed, short arc xenon lamp for UV-VIS applications such as absorbance, bioreflectance,
More informationModBox-1310nm-1550nm-28Gbaud-PAM nm & 1550 nm, 28 Gbaud PAM-4 Reference Transmitter
-1310nm-1550nm-28Gbaud-PAM4 The -1310nm-1550nm-28Gbaud-PAM4 is a dual wavelength 1310 nm and 1550 nm Linear Reference Transmitter that generates excellent quality optical data streams PAM-4 up to 28 Gbaud
More informationPSM-003. Micro Polarization Controller/Scrambler. User Guide
PSM-003 Micro Polarization Controller/Scrambler User Guide Version: 1.0 Date: August 23, 2012 General Photonics, Incorporated is located in Chino California. For more information visit the company's website
More information4 MHz Lock-In Amplifier
4 MHz Lock-In Amplifier SR865A 4 MHz dual phase lock-in amplifier SR865A 4 MHz Lock-In Amplifier 1 mhz to 4 MHz frequency range Low-noise current and voltage inputs Touchscreen data display - large numeric
More informationLaserPXIe Series. Tunable Laser Source PRELIMINARY SPEC SHEET
-1002 1000 Series Tunable Laser Source PRELIMINARY SPEC SHEET Coherent Solutions is a Continuous Wave (CW), tunable laser source offering high-power output, narrow 100 khz linewidth and 0.01 pm resolution
More informationOPTICAL MEASURING INSTRUMENTS. MS9710C 600 to 1750 nm OPTICAL SPECTRUM ANALYZER GPIB. High Performance for DWDM Optical Communications
OPTICAL SPECTRUM ANALYZER 600 to 750 nm GPIB High Performance for DWDM Optical Communications The is a diffraction-grating spectrum analyzer for analyzing optical spectra in the 600 to 750 nm wavelength
More informationScanning For Photonics Applications
Scanning For Photonics Applications 1 - Introduction The npoint LC.400 series of controllers have several internal functions for use with raster scanning. A traditional raster scan can be generated via
More informationUSA Price List. January or 8-channel LIBSCAN system (100 mj, 1064 nm laser) Alternative LIBSCAN configurations
USA Price List January 2012 PRODUCT CODE LIBSCAN 100 LIBSCAN DESCRIPTION 6 or 8-channel LIBSCAN system (100 mj, 1064 nm laser) Includes LIBSCAN head, laser, spectrometer console, interconnecting umbilical
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationModBox-1310nm-1550nm-NRZ 1310nm & 1550 nm, 28 Gb/s, 44 Gb/s Reference Transmitters
Fiber The series is a family of Reference Transmitters that generate at 1310 nm and 1550 nm excellent quality NRZ optical data streams up to 28 Gb/s, 44 Gb/s. These Tramsitters offer very clean eye diagram
More information-Sharp Telecentric backlight illuminator by EFFILUX
-Sharp Telecentric backlight illuminator by EFFILUX EFFI-Telecentric is a telecentric backlight illuminator used to get rid of the undesired effects obtained with a diffuse backlighting system It is highly
More informationDT9834 Series High-Performance Multifunction USB Data Acquisition Modules
DT9834 Series High-Performance Multifunction USB Data Acquisition Modules DT9834 Series High Performance, Multifunction USB DAQ Key Features: Simultaneous subsystem operation on up to 32 analog input channels,
More informationModel 7330 Signal Source Analyzer Dedicated Phase Noise Test System V1.02
Model 7330 Signal Source Analyzer Dedicated Phase Noise Test System V1.02 A fully integrated high-performance cross-correlation signal source analyzer from 5 MHz to 33+ GHz Key Features Complete broadband
More informationMulti Application Test System
Q00 series Multi pplication Test System Data sheet Bulletin Q00-EN Frame Controller (Q / Q) Product name Q Q Number of slots 3 9 Display Remote interface GPIB Ethernet USB External storage interface Trigger
More informationApplication Note AN-708 Vibration Measurements with the Vibration Synchronization Module
Application Note AN-708 Vibration Measurements with the Vibration Synchronization Module Introduction The vibration module allows complete analysis of cyclical events using low-speed cameras. This is accomplished
More informationModBox-CBand-NRZ series C-Band, 28 Gb/s, 44 Gb/s, 50 Gb/s Reference Transmitters
light.augmented ModBox-CBand-NRZ series The -CBand-NRZ series is a family of Reference Transmitters that generate excellent quality NRZ optical data streams up to 28 Gb/s, 44 Gb/s, 50 Gb/s in the C-band.
More informationModBox-850nm-NRZ-series
The -850nm-NRZ series is a family of Reference Transmitters that generate excellent quality NRZ optical data streams up to 28 Gb/s, 44 Gb/s, 50 Gb/s at 850 nm. These transmitters produce very clean eye
More informationLVM LASER VALVE MOTION measurement system LASER-BASED TECHNOLOGY. SIMULTANEOUS, REAL-TIME DISPLACEMENT, VELOCITY and ACCELERATION ANOLOG OUTPUTS
LVM-4000 LASER VALVE MOTION measurement system OH-1000 LASER VIBROMETER HEAD LASER-BASED TECHNOLOGY SIMULTANEOUS, REAL-TIME DISPLACEMENT, VELOCITY and ACCELERATION ANOLOG OUTPUTS ENGINE HEAD VIBRATION
More informationST800K-U Optical Power Meter. User Manual V1.0
User Manual V1.0 Contents 1. Summary... 1 2. Functions... 2 3. Specifications... 2 4. Layout... 4 5. Operation... 5 6. Maintenance... 7 7. Faults & Solutions... 8 8. Appendix A...9 9. Appendix B...11 10.
More informationBEAMAGE 3.0 KEY FEATURES BEAM DIAGNOSTICS PRELIMINARY AVAILABLE MODEL MAIN FUNCTIONS. CMOS Beam Profiling Camera
PRELIMINARY POWER DETECTORS ENERGY DETECTORS MONITORS SPECIAL PRODUCTS OEM DETECTORS THZ DETECTORS PHOTO DETECTORS HIGH POWER DETECTORS CMOS Beam Profiling Camera AVAILABLE MODEL Beamage 3.0 (⅔ in CMOS
More informationConnection for filtered air
BeamWatch Non-contact, Focus Spot Size and Position monitor for high power YAG, Diode and Fiber lasers Instantly measure focus spot size Dynamically measure focal plane location during start-up From 1kW
More informationUNIIQA+ NBASE-T Monochrome CMOS LINE SCAN CAMERA
UNIIQA+ NBASE-T Monochrome CMOS LINE SCAN CAMERA Datasheet Features Cmos Monochrome Sensor : 4096 RGB Pixels 5x5µm 2048 RGB Pixels 10x10µm Interface : NBASE-T (up to 5Gb/s) Line Rate : Up to 140 kl/s in
More information2 MHz Lock-In Amplifier
2 MHz Lock-In Amplifier SR865 2 MHz dual phase lock-in amplifier SR865 2 MHz Lock-In Amplifier 1 mhz to 2 MHz frequency range Dual reference mode Low-noise current and voltage inputs Touchscreen data display
More informationopengear OPG-1L 50 MHz-2.3 GHz
MODEL opengear OPG-1L 50 MHz-2.3 GHz RF FIBER OPTIC LINK EMCORE s opengear OPG-1L s are optimized to perform in the 50 MHz to 2.3 GHz frequency range providing transparent signal transport for satellite
More informationSNG-2150C User s Guide
SNG-2150C User s Guide Avcom of Virginia SNG-2150C User s Guide 7730 Whitepine Road Revision 001 Richmond, VA 23237 USA GENERAL SAFETY If one or more components of your earth station are connected to 120
More informationDT9857E. Key Features: Dynamic Signal Analyzer for Sound and Vibration Analysis Expandable to 64 Channels
DT9857E Dynamic Signal Analyzer for Sound and Vibration Analysis Expandable to 64 Channels The DT9857E is a high accuracy dynamic signal acquisition module for noise, vibration, and acoustic measurements
More informationLight Source. Specification & User Manual
Light Source Specification & User Manual Page 1 of 11 Copyright 2011 reserves the right to modify specifications without prior notice Table of Contents 1. Description and Features.......3 2. Specification......4
More informationSLD. Board FC/APC Connector. TEC Control. Board. Control Circuits. Control interface DB9 (Female)
Product Specification, Revision 1.1 SLD Light Source Module Part Number: IPSDS1604-1. Configuration SLD Drive Board SLD TEC Control Board FC/APC Connector Control Circuits Control interface DB9 (Female)
More informationCTP10 KEY FEATURES SPEC SHEET COMPONENT TEST PLATFORM
COMPONENT TEST PLATFORM Efficiently test passive components in 24/7 operation. Perform single sweep insertion loss and return loss measurements with unprecedented dynamic range, speed and resolution. SPEC
More information7000 Series Signal Source Analyzer & Dedicated Phase Noise Test System
7000 Series Signal Source Analyzer & Dedicated Phase Noise Test System A fully integrated high-performance cross-correlation signal source analyzer with platforms from 5MHz to 7GHz, 26GHz, and 40GHz Key
More informationPicoScope 6407 Digitizer
YE AR PicoScope 6407 Digitizer HIGH PERFORMANCE USB DIGITIZER Programmable and Powerful 1 GHz bandwidth 1 GS buffer size 5 GS/s real-time sampling Advanced digital triggers Built-in function generator
More informationOTS-300 Express Series Power Meters/Sources and Testers
OTS-300 Express Series includes intelligent, versatile optical meters, sources, and testers that simultaneously test and store dual wavelength attenuation measurements. At the press of a button, dual wavelength
More informationDT9837 Series. High Performance, USB Powered Modules for Sound & Vibration Analysis. Key Features:
DT9837 Series High Performance, Powered Modules for Sound & Vibration Analysis The DT9837 Series high accuracy dynamic signal acquisition modules are ideal for portable noise, vibration, and acoustic measurements.
More informationTHE ART OF ENGINEERING
THE ART OF ENGINEERING L-Band Distributing Matrix 16² The final product may vary from the above image depending on the options selected. Product: DEV 1985/16x16 DEV 1985/16x8 16x16 Distributing Matrix
More informationVGA Port. Chapter 5. Pin 5 Pin 10. Pin 1. Pin 6. Pin 11. Pin 15. DB15 VGA Connector (front view) DB15 Connector. Red (R12) Green (T12) Blue (R11)
Chapter 5 VGA Port The Spartan-3 Starter Kit board includes a VGA display port and DB15 connector, indicated as 5 in Figure 1-2. Connect this port directly to most PC monitors or flat-panel LCD displays
More informationGFT Channel Slave Generator
GFT1018 8 Channel Slave Generator Features 8 independent delay channels 1 ps time resolution < 100 ps rms jitter for optical triggered delays 1 second range Electrical or optical output Three trigger modes
More informationMore Precision. scancontrol // 2D/3D laser scanner (laser profile sensors)
More Precision scancontrol // 2D/D laser scanner (laser profile sensors) 12 scancontrol 29x gapcontrol 29x1 Technical details and versions - z-axis measuring range up to 265mm - x-axis measuring range
More informationSHOWLINE SL NITRO 510 LED STROBE LUMINAIRE SPECIFICATIONS.
GENERAL. A.) Overview. SHOWLINE SL NITRO 510 LED STROBE LUMINAIRE SPECIFICATIONS. 1.) The luminaire shall be an LED strobe luminaire employing one-thousand, three-hundred and fifty (1350) white LED engines.
More informationInGaAs multichannel detector head
Near infrared line camera (Line rate: 31.25 khz) The is a multichannel detector head suitable for applications where high-speed response is required, such as SD- OCT (spectral domain-optical coherence
More informationNew GRABLINK Frame Grabbers
New GRABLINK Frame Grabbers Full-Featured Base, High-quality Medium and video Full capture Camera boards Link Frame Grabbers GRABLINK Full Preliminary GRABLINK DualBase Preliminary GRABLINK Base GRABLINK
More informationEM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features
Description Page 1 of 8 The EM1 is a transmissive optical encoder module. This module is designed to detect rotary or linear position when used together with a codewheel or linear strip. The EM1 consists
More informationAdvancements in the Micromirror Array Projector Technology
Advancements in the Micromirror Array Projector Technology D. Brett Beasley, Matt Bender, Jay Crosby, Tim Messer, and Daniel A. Saylor Optical Sciences Corporation www.opticalsciences.com P.O. Box 8291
More informationUser Manual. pe Universal Fluorescence Excitation Source. DOC-008 Iss 6 1
User Manual pe-4000 Universal Fluorescence Excitation Source DOC-008 Iss 6 1 Table of Contents 1. Introduction... 3 2. Safety Precautions... 3 3. Getting Started System Components... 5 4. Installation
More informationThe extremely compact laser head is approximately 480 mm long and can
NOSECOND LASERS Flash-lamp Pumped Q-switched Nd:YAG Lasers NL300 series electro-optically Q-switched nanosecond Nd:YAG lasers produce high energy pulses with 3 6 ns duration. Pulse repetition rate can
More informationPicoScope 6407 Digitizer
YE AR HIGH PERFORMANCE USB DIGITIZER Programmable and Powerful 1 GHz bandwidth 1 GS buffer size 5 GS/s real-time sampling Advanced digital triggers Built-in function generator USB-connected Signals Analysis
More informationUNiiQA+ NBASE-T CMOS COLOUR CAMERA
Datasheet UNiiQA+ NBASE-T CMOS COLOUR CAMERA Features Cmos Colour Sensor : 4096 RGB Pixels 5x5µm (Full Definition) 2048 RGB Pixels 10x10µm (True Colour) Interface : NBASE-T (up to 5Gb/s) Line Rate : 50
More informationOpticalProducts. Illuminating Your Network. Testing the World s Networks
OpticalProducts Illuminating Your Network Testing the World s Networks Fibre Optic Testers Ease of use and cost-effectiveness Trend s Family of Optical Products Has Increased The new products include Optical
More informationSingMai Electronics SM06. Advanced Composite Video Interface: HD-SDI to acvi converter module. User Manual. Revision 0.
SM06 Advanced Composite Video Interface: HD-SDI to acvi converter module User Manual Revision 0.4 1 st May 2017 Page 1 of 26 Revision History Date Revisions Version 17-07-2016 First Draft. 0.1 28-08-2016
More informationOLP-87/87P. SmartClass Fiber PON Power Meter and Microscope
OLP-87/87P SmartClass Fiber PON Power Meter and Microscope The Viavi Solutions OLP-87 is an FTTx/PON power meter for use in qualifying, activating, and troubleshooting B-PON, E-PON, G-PON, and next-generation,
More informationAgilent 83437A Broadband Light Source Agilent 83438A Erbium ASE Source
Agilent 83437A Agilent 83438A Erbium ASE Source Product Overview H Incoherent light sources for single-mode component and sub-system characterization The Technology 2 The Agilent Technologies 83437A (BBLS)
More informationLaser Beam Analyser Laser Diagnos c System. If you can measure it, you can control it!
Laser Beam Analyser Laser Diagnos c System If you can measure it, you can control it! Introduc on to Laser Beam Analysis In industrial -, medical - and laboratory applications using CO 2 and YAG lasers,
More informationOLS Series Light Sources, OPM Series Optical Power Meters, and Related Test Kits User s Guide
OLS Series Light Sources, OPM Series Optical Power Meters, and Related Test Kits User s Guide Limited Warranty One Year Limited Warranty All Noyes products are warranted against defective material and
More informationProduct Guide. WaveAnalyzer High-Resolution Optical Spectral Analysis
Product Guide WaveAnalyzer High-Resolution Optical Spectral Analysis WaveAnalyzer High Resolution Optical Spectral Analysis The WaveAnalyzer 15S Optical Spectrum Analyzer is a real-time, very-high-resolution
More informationSpatial Light Modulators
Spatial Light Modulators XY Series - Complete, all-in-one system Spatial Light Modulators A spatial light modulator (SLM) is an electrically programmable device that modulates light according to a fixed
More informationAgilent N7744A 4-Channel Optical Multiport Power Meter N7745A 8-Channel Optical Multiport Power Meter. Fully compliant to LXI Class C specification
Agilent N7744A 4-Channel Optical Multiport Power Meter N7745A 8-Channel Optical Multiport Power Meter Fully compliant to LXI Class C specification General Information Up to 8 power meter channels in a
More informationSMT Encoder for High Performance, High Volume Designs Small Size High Resolution Low Cost ChipEncoder Reflective Surface Mount Encoder Features
SMT Encoder for High Performance, High Volume Designs Small Size 7.0mm (W) x 11.0mm (L) x 3.1mm (H) High Resolution Linear: 10μm or 1μm per quadrature count Rotary: 3,300 to 327,000 quadrature counts per
More informationLensed Fibers & Tapered Ends Description:
Lensed Fibers & Tapered Ends Description: LaseOptics Corporation ( LaseOptics ) has been producing next generation optical lensed fibers. LaseOptics Lensed Optical Fibers technology is proprietary integrated
More information25W 9xxnm Uncooled Multimode Laser Diode Module
25W 9xxnm Uncooled Multimode Laser Diode Module BMU25-9xx-01/02-R Features: Single emitter based laser diode module High output power of 25W 0.15NA or 0.22NA 105μm core multimode optical fiber Hermetically
More informationDigital Delay / Pulse Generator DG535 Digital delay and pulse generator (4-channel)
Digital Delay / Pulse Generator Digital delay and pulse generator (4-channel) Digital Delay/Pulse Generator Four independent delay channels Two fully defined pulse channels 5 ps delay resolution 50 ps
More informationSpecifications. Mechanical Information. Mass (grams) Dimensions (mm) 15 x 75 Housing. Anodised Aluminium Isolated Body
Beta TX Datasheet Beta-TX The Beta-TX is a complete self contained laser diode system which can operate in both CW and modulation modes. The Beta- TX features high speed modulation with a bandwidth of
More informationAgilent Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Data Sheet
Agilent Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Data Sheet Agilent multi-wavelength meters are Michelson interferometer-based instruments that measure wavelength and optical power of laser
More informationDT3162. Ideal Applications Machine Vision Medical Imaging/Diagnostics Scientific Imaging
Compatible Windows Software GLOBAL LAB Image/2 DT Vision Foundry DT3162 Variable-Scan Monochrome Frame Grabber for the PCI Bus Key Features High-speed acquisition up to 40 MHz pixel acquire rate allows
More informationCONFOCAL MICROSCOPE. Instrument Details: Make: Zeiss. Modal: LSM 700. Specifications: Microscopes
CONFOCAL MICROSCOPE Instrument Details: Make: Zeiss Modal: LSM 700 Specifications: Microscopes Stands: Upright: Axio Imager.Z1m, M1m and Axio Scope mot for LSM Inverted: Axio Observer.Z1m SP (side port)
More informationISOMET. Compensation look-up-table (LUT) and How to Generate. Isomet: Contents:
Compensation look-up-table (LUT) and How to Generate Contents: Description Background theory Basic LUT pg 2 Creating a LUT pg 3 Using the LUT pg 7 Comment pg 9 The compensation look-up-table (LUT) contains
More informationINSTRUCTIONAL MANUAL FOR LCD ZOOM MICROSCOPE
INSTRUCTIONAL MANUAL FOR LCD ZOOM MICROSCOPE ? 8 LCD Screen? 10.4 LCD Screen LCD Zoom Microscope Instruction Manual Please read the Instruction Manual carefully before installation and keep it for future
More informationSpatial Light Modulators
Spatial Light Modulators XY Series -Complete, all-in-one system Data Sheet May 2009 Spatial Light Modulators A spatial light modulator (SLM) is an electrically programmable device that modulates light
More informationSHOWLINE SL NITRO 510C LED STROBE LUMINAIRE SPECIFICATIONS.
GENERAL. A.) Overview. SHOWLINE SL NITRO 510C LED STROBE LUMINAIRE SPECIFICATIONS. The luminaire shall be an LED strobe luminaire employing five hundred and twenty eight (528) red, green, blue and white
More informationAdvanced Test Equipment Rentals ATEC (2832)
E stablished 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Technical Datasheet Scalar Network Analyzer Model 8003-10 MHz to 40 GHz The Giga-tronics Model 8003 Precision Scalar
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) For more information about Agilent Technologies test and measurement products, applications, services, and for a current
More informationMTP1000 with LaserBlade, VOABlade, PowerBlade & SwitchBlade Smarter Modular Test Platform
MTP1000 with LaserBlade, VOABlade, PowerBlade & SwitchBlade Smarter Modular Test Platform Up to 9 blades per MTP1000 Multiple MTP1000 units controlled from a single PC Your choice of 4 different types
More informationLeica TCS CARS. Live Molecular Profiling Technical Documentation. Living up to Life
Leica TCS CARS Live Molecular Profiling Technical Documentation Living up to Life Microscopes Inverted Leica DMI6000 CS Microscope anti-vibration table Specification Vibration insulation Passive Z-drive
More informationAgilent 86120B, 86120C, 86122A Multi-Wavelength Meters Technical Specifications
Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Technical Specifications March 2006 Agilent multi-wavelength meters are Michelson interferometer-based instruments that measure wavelength and optical
More informationFiber-Coupled Acoustic-Optics Modulator (AOM) Module
Fiber-Coupled Acoustic-Optics Modulator (AOM) Module User Manual GAUSS LASERS TECHNOLOGY (SHANGHAI) CO., LTD. CATALOG Revision... 4 About This Manual... 4 Declaration... 4 1. Preface... 5 2. Working Conditions
More informationIS 140 IGA 140 IS 140-PB IGA 140-PB IS 140-PN IGA 140-PN IS 140-ET IGA 140-ET
IMPAC Infrared Temperature Sensors focusable optics for non-contact temperature measurements on metals, ceramics, graphite etc. between 220 and 3500 C IS 140 IGA 140 IS 140-PB IGA 140-PB IS 140-PN IGA
More informationContents. 1. System Description 3. Overview 3 Part Names 3 Operating Conditions 7 Start-up Procedure 7. 2.
Rigel 1550 Terahertz Spectrometer User Manual Contents info@tetechs.com 1. System Description 3 Overview 3 Part Names 3 Operating Conditions 7 Start-up Procedure 7 2. Safety 9 Laser Safety 9 Electrical
More informationSTAR-07. Industrial Pattern Projection. System Architecture. System Control
STAR-07 Industrial Pattern Projection STAR-07 is a high performance DLP projector based upon the Texas Instruments micromirror technology and designed to serve in demanding industrial applications. Widely
More information4.9 BEAM BLANKING AND PULSING OPTIONS
4.9 BEAM BLANKING AND PULSING OPTIONS Beam Blanker BNC DESCRIPTION OF BLANKER CONTROLS Beam Blanker assembly Electron Gun Controls Blanker BNC: An input BNC on one of the 1⅓ CF flanges on the Flange Multiplexer
More informationIMPAC Infrared Thermometers
IMPAC Infrared Thermometers focusable optics for non-contact temperature measurements on metals, ceramics, graphite etc. between 300 and 3300 C IS 140 IGA 140 IS 140-PB IGA 140-PB Short response times
More informationPULSE & DELAY GENERATOR. Output Amplitude HIGH SPEED DIGITIZER. BW / max. Sample Rate STREAK CAMERA
BNC France located in the Aquitaine region is a company specializes in service and distribution in Europe of high performance Test and Measurement equipment for scientific, defense, industrial applications
More information