Infinitely Expandable

Transcription

1 A revolutionary A revolutionary CO.,LTD. Address: 257-6, Gongdan-dong, Gumi-si, Gyeongsangbuk-do, Korea Tel : , Fax: User s Manual Thank you for purchasing our. Please read through this user's manual for safety before installing this product. This product is manufactured for Multi LCD model only

2 A ON OFF SET FO VEO S-VEO HDSDI BROADCAST ON OFF 1 2 CONVERTER PUT DTV HDMI C1 C2 FO AUTO PUT FUNCTION REMOTE CONTROL B Features of Enjoy a wide flat screen with high brightness and high quality. Easy to install and move due to its thin design Enjoy your favorite programs with various split-screen features simultaneously presenting several programs. Class A digital device Notice to users It is a device designed for business purpose with a safety certificate for electromagnetic interference, which user should be mindful of. Thank you for purchasing our monitor. This manual describes how to use the product and notes in use. Please read the manual carefully before using it. After reading this manual, please retain for future reference. If you have any questions or a problem occurs, please contact either the company you purchased this product from or an authorized service center. Displaying static picture for an extended period of time may cause an burn-in effect. Burn-in effect and the faults in brightness and picture elements caused by fixed images are not subject to the warranty coverage. Warning Warning If you fail to comply with the regulations for safety and proper use, fire or injury may be caused. To prevent electric shock, Do not remove cover. No user serviceable part inside Refer servicing to qualified service personal. Supplied Accessories User's Manual Multi-Screen Control Guide Pin(4pcs) Cable Power Cable Cable System(MSCS) MA FRAME (refer to page 16~17) Optional Accessories Converter (ODC-10000) New MFC SET 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. " Important Safety Instructions" 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The symbol in figure 21 shall be shown adjacent to the text of item 12 above. SETTG - 1 -

3 Contents NOTICE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS SE. REFER SERVICG TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. 1. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable 2. WARNG - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture. 3. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 4. Use only a properly grounded plug and receptacle 5. "Warning" CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 6. "Warning" CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Cautions for consisting System...4 Clearance for Ventilation...6 Do not cover the vent hole for the fan...7 Cleaning and Maintenance...7 Please keep following instruction for panel protection without exception...8 Handle with Caution...9 How to carry...10 Application information...11 Attention for Installing Safety Precautions How to Install Guidance for Users How to Connect Cables Connection of Single Connection of Multiple Connection of Control Cable - In case of using MSCS Connection of Control Cable - In case of using the other control program besides MSCS Connection of cable Connention of optional accessory setting of X x Y Setting and operation of MSCS software MSCS Installation Start MSCS Setting of COM Port Setting of Port (In case of connecting to a Hub) Setting of Port (In case of connecting directly to user's computer) Network IP setting for MSCS "New design/last design" setting Multi-screen configuration Selecting the command transmission method Changing the input source Slide Control Picture Control Timer Control Tracking Control Homepage log on and Version Information Control Method of optional accessory New MFC Converter MSCS Protocol...63 Attachment : ASCII to HEX Conversion Table Before calling for service Applicable signals (, ) Specification Option Specification Converter New MFC

4 Cautions for consisting System The number of Daisy chain connection Environmental condition for installation WARNG - The image quality may vary depend on the quality of signal and cable condition. PUT SOURCE Resolution Connection Remark 1600 x 1200 x 60Hz 6 sets HDCP Available 1600 x 1200 x 60Hz 3 sets Video NTSC, PAL, SECAM 6 sets 30 sets Cable Only - If you need to use more sets than indicated in the table, using a distributor is highly recommended. - Since panel is very sensitive for physical impact, installation requires considerable caution. - Minimum clearance(20cm) must be secured for smooth ventilation. (See page 6, 16~17)Installation must avoid air tight or near air tight places. Improper ventilation causes malfunction and shortens product lifetime by rapid internal temperature rise. If has to installed at the improper ventilation, additional ventilation openings or fans must be provided to keep the internal temperature between 0 ~ 35 C. - For ground of and application devices, it should be connected as frame ground. - Considering Max power consumption, check the main electric specification. WARNG Caution for the other control program besides Control Program (MSCS) Recommended Operating Condition - Temperature: 5~35 C, Humidity: 35~75%, Suitable operating time : under 12 hours a day. - Do not install the set at the air-tight condition. - If you want to use automatic power on/off function that make turned on/off by connecting main power, allow at least 20 seconds of Stand-by time before is turned on, when you make control program. - If communication signal or other image signal is applied to 9 or more sets simultaneously, communicational error may occur. (Power on & Broadcast) - It is recommended to install the set with good ventilation. - Do not install the set at the place of direct sunlight or excessive exposure to lightings. Blackening, stains or burning effect on the screen can be occurred by improper installation or use against the above recommended conditions. Consideration for easier service - When you design the exterior design for system, consider easier disassembly for possible service occasion in the future. - The sliding Universal Unit of is recommended for easier service. - If service people can step into the backside of system, it can greatly reduce time and effort for service. - In case of higher locations, consider the installation location and exterior design for easier service

5 Model Name : OLM-4610 Voltage : AC~ V Current : Max. 3A Frequency : 50/60Hz Serial No : CO., LTD. Made in Korea CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN To prevent electric shock, Do not remove cover. No user serviceable part inside Refer servicing to qualified service personal. SELECT FAN STB PWR ON SVC VEO Clearance for Ventilation Do not cover the vent hole for the fan WARNG - When you install, make sure there is at least 20cm clearance for effective ventilation and do not seal off sets. If sets are installed at the locations of bad ventilation, the inner temperature can be raised rapidly and it can cause frequent malfunctions and rapid reduction of the product life. - Carefully install not to cover the fan air holes with any structural object. If the holes are covered with anything, the inner temperature can be raised rapidly and it can cause malfunctions. Installation structure FAN WARNG Cleaning and Maintenance - Regularly clean off the vent holes in the back of sets. If the vent holes and the fan air holes are clogged with dust, it prevents the air flow inside of sets. It can cause rapid increase of the inner temperature and may cause malfunctions. Clean off the vent holes and the fan air holes with a vacuum cleaner regularly. Ventilation space in front of must be furnished for heat dispersion.if the front space of has to be sealed, there must be consideration for the heat dispersion in the rear side of. Vacuum Cleaner

6 WARNG Warning Please keep following instruction for panel protection without exception. - This product can be damaged even with minor impact for its nature. Please keep following instruction to carry or store the products. Warning Handle with Caution. - Shock/Impact on the set's sides will result in internal circuit damages. - The edge/bottom of the panel are fragile. Use shock-absorbing pads or rugs for laying down the product. WARNG PANEL PANEL PANEL PANEL CUSHION PANEL If you need to stand LCD, you must use handles on the back and lean over the LCD to avoid panel touches ground or floor. If you need to lay down LCD as face down position, please use shock-absorbing pads under the LCD. If you need to lay down LCD as face up position, please be cautious for falling objects on the surface of the LCD. Please do not stand LCD alone. It may fall or slip off and Panel can be broken or damaged. Please do not lean over the LCD. It may damage the bottom part of the LCD. Please do not lean over the LCD toward the edge part. It may damage the edge part of the LCD

7 How to carry Application information WARNG It always needs two persons to carry or install. When you carry with up straight manner, please hold handles on the back and bottom part of the panel together. Please be careful not to touch the bottom part of the panel when you put down the panel. Please do not touch the panel with your hand. If static images are displayed on the screen for a long time, it causes burn-in image. Please keep the following instruction to optimize the lifetime and functions of the product. 1. Operating condition Temperature: 20 ± 15 C Humidity: 55 ± 20 % Display pattern: moving picture or regular switchover display Environmental condition : Well ventilated place is recommended. Power off and screen saver : Periodical power-off or screen saver is needed after long-term static display. Note : Moving picture or black pattern is strongly recommended for screen saver. WARNG Don't carry in Horizontal Status. 2. Operating methods to minimize burn-in image due to long-term static information display Suitable operating time : under 12 hours a day. Periodical display contents change from static image to moving picture. Periodical background color and character (image) color change DEPARTURE ÅÆ DEPARTURE Flight No. Time Gate Flight No. Time Gate UA :20 A02 UA :20 A02 KE :10 K17 KE :10 K17 AN :45 F11 AN :45 F11 Change the images of little luminance difference between the background and characters, periodically. DEPARTURE Æ DEPARTURE Æ DEPARTURE Æ DEPARTURE Flight No. Time Gate Flight No. Time Gate Flight No. Time Gate Flight No. Time Gate UA :20 A02 UA :20 A02 UA :20 A02 UA :20 A02 It is not recommended to display the images of huge luminance difference between the background and characters or the images of grey tone. When two operators uphold, Panel is twisted by unbalanced handling. ARRIVAL (X) ARRIVAL Flight No. Time Gate Delay Flight No. Time Embark Delay AA 213 9:20 K11 On time AA 213 9:20 New York On time OZ :25 G21 10 min. OZ :25 Seoul 10 min. JA :05 A19 On time JA :05 Beijing On time (X) Scroll the characters periodically. DEPARTURE DEPARTURE DEPARTURE DEPARTURE Flight No. Time Gate Flight No. Time Gate Flight No. Time Gate Flight No. Time Gate UA :20 A02 UA :20 A02 Æ KE Æ UA :20 A02 UA :40 K17 KE :10 K17 KE :40 K17 KE :10 K17 15:20 A02 AN :45 F11 UA :03 A02 KE 732 AN :45 F11 18:20 K17 (Whole Screen Scroll)

8 WARNG Warning Attention for Installing WARNG fixed Avoid giving a shock or damage at LCM corner or other parts during setting Multi-Vision. Keep all LCMs balanced in vertical or horizontal force after setting Multi-Vision. Avoid LCM is set up tilted so it can give a damage to down LCM. Avoid that LCM is twisted. Avoid that LCM outside is shocked or damaged by sharp thing

9 1. Safety Precautions If it operates abnormally, stop using it immediately. Do not place any liquid-containing container on it. If the inside is wet, it may cause electric shock or fire. Do not put any foreign material into the product. It may cause a failure or shorten the life span. Do not pull out or hang down the connection cable. It may damage the cord to cause fire or electric shock. Do not lean against the product or keep it leaned. It may cause injury or failure. Do not put it at any place with much humidity, dust, oil, smoke or steam. It may cause failure. Please refer to a specialized construction company for installing stand or wall mount unit. Otherwise, damage or injury may be caused. Do not touch the device when lightning strikes. Do not install in an unstable location It may cause injury. Pull out the power plug by holding the plug. Otherwise, it may damage the power cord to cause fire or electric shock. If you do not want to use the product for a long time, keep the power plug unplugged to save electricity. The socket-outlet should be installed near the equipment and be easily accessible. Do not put any heavy object on it. It may cause failure. Avoid any action to damage the power cord or power plug. It may cause fire or electric shock. Do not pull out the power plug with a wet hand. It may cause electric shock. Do not exceed ratings of AC outlet or extension cords. It may cause failure. Install the product on safe and flat surface. Do not ride or step on the product It may cause breakage when fallen down. When moving it, disconnect the connecting cable. Otherwise, it may damage the cable to cause fire or electric shock. Do not alter (or disassemble) the product. It may cause electric shock since high voltage is flowing inside. Do not install the product where it may be exposed to direct sunlight or near any heating device. It may shorten the product's life span or cause failure. Make sure the product is not covered with any object. If the ventilation hole is blocked, the inside temperature may rise to cause overheating resulting in fire. Do not put candles on the product. If the liquid flows inside the product. It may cause electric shock or fire. Do not touch product s front surface with hand. Otherwise, the image quality can be lowered. Do not poke the front screen with sharp material. It may damage the screen and may cause malfunction of the product

10 2. How to Install MA FRAME Stand Unit (Option) MA FRAME Wall Mounting Unit (Option) Please do not install our product at following locations to protect the product and prevent possible malfunction. - Places of vibration or shock: LCD set may fall and damaged - Next or near to Sprinkler sensors: The sensors may detect heat from a set and sprinkler can be activated. - Around high voltage power lines: Noise from the power line may affect screen images - Around heating apparatus: LCD set may be overheated and damaged. The set can be installed as shown below. (For further information, refer to the optional 'MA FRAME Installation and Setup Guide'.) Please check the stability of wall. If the wall is not strong enough, reinforce the wall before installation. Please connect all the cables to proper ports in a set before installation. The set can be installed on the wall as shown below. (For further information, refer to the optional 'MA FRAME Installation and Setup Guide'.) MA Hanger FRAME MA FRAME Hanger LCD LCD WALL BRACKET Hanger Bolt Hanger Bolt Guide Pin Guide Pin Install on a MA FRAME Stand Please secure minimum clearance as shown in the picture for adequate ventilation and technical service. 20cm Mount on the MA FRAME wall Please secure minimum clearance as shown in the picture for adequate ventilation and technical service. 20cm 20cm 20cm 20cm 20cm 20cm

11 Model Name : OLM-4610 Voltage : AC~ V Current : Max. 3A Frequency : 50/60Hz Serial No : CO., LTD. Made in Korea CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN To prevent electric shock, Do not remove cover. No user serviceable part inside Refer servicing to qualified service personal. SELECT FAN STB PWR ON SVC VEO Model Name : OLM-4610 Voltage : AC~ V Current : Max. 3A Frequency : 50/60Hz Serial No : CO., LTD. Made in Korea CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN To prevent electric shock, Do not remove cover. No user serviceable part inside Refer servicing to qualified service personal. SELECT FAN STB PWR ON SVC VEO 3. Guidance for Users Input/Output Terminals Set Switch Setting Example of Switch setting You can set with 3 rotary switches as shown in the following figure. [ 01] 100 digit 10 digit single digit [ 15] 100 digit 10 digit single digit SELECT ➊ ➋ ➌ 1. In / Out Analog RGB Signal, D-sub 15pin 2.VEO Composite Signal, BNC Jack 3. Digital RGB Signal, Single Link 24Pin When you set of set, power cable must be disconnected. If power cable is not disconnected during setting, set may be operated with the previous and it may cause abnormal behavior. For stable operation, wait for at least 10 seconds prior to use control program after the first AC power connection. LED Indication ON OFF BLKG ➐ FAN STB PWR ON SVC VEO ➎ ➏ ➍ 4. Control, Firmware Upgrade, D-sub 9pin 5. Ethernet Control, RJ45 6.Service Port For the exclusive use of service 7. Switch Set Switch LED Indication FAN STB PWR ON FAN STB PWR ON FAN STB PWR ON Description No Power. Insert power cord(stand-by state) Power On By MSCS. The PWR ON LED blinks continually. ➑ 8.AC Input AC 100V ~240V, 50/60Hz FAN STB PWR ON Power Off by MSCS Program. (System ready). The product shape may vary depending on the model. FAN : Normal - LED Off, Abnormal - LED On IF FAN LED is turned on, please check FANs

12 Model Name : OLM-4610 Voltage : AC~ V Current : Max. 3A Frequency : 50/60Hz Serial No : CO., LTD. Made in Korea CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN To prevent electric shock, Do not remove cover. No user serviceable part inside Refer servicing to qualified service personal. SELECT FAN STB PWR ON SVC VEO 4. How to Connect Cables Do not connect/disconnect cables while or other external equipments are turned on. First turn off the power all the attached equipment and make connections. Make sure the power cord is inserted properly into the power inlet to prevent unexpected pullout of the cord Connection of Single and should be connected; a Com Port in a and port in a is connected with supplied cable. On/Off or Screen adjustment can be controlled by MSCS (Multi-Screen Control System). setting on the backside of must be identical with the setting in MSCS to control with a. If you do not have Com Port, you need to use an USB converter for. Depending on manufacturers or models, converters may cause malfunction. [ 01] switch must be set as 1 for one set use. Video connection (Maximum 5m) VCR VEO Connection (Maximum 5m) connection (Maximum 5m) SELECT If you need longer connection, please use boosters or fiber-optic cable. FAN STB PWR ON (Maximum 15m) SVC (MSCS) to control

13 4.2. Connection of Multiple Recommended maximum set connection for Multi setting is shown in table below. If you need to connect more than described in the table, you have to use distributors. Image quality can be affected by cable or signal quality. PUT SOURCE Resolution Connection Remark 1600 x 1200 x 60Hz 6 sets HDCP Available 1600 x 1200 x 60Hz 3 sets Video NTSC, PAL, SECAM 6 sets 30 sets Cable Only VCR Video VEO VEO VEO VEO VEO SELECT SELECT SELECT SELECT SELECT FAN STB PWR ON FAN STB PWR ON FAN STB PWR ON FAN STB PWR ON FAN STB PWR ON SVC SVC SVC SVC SVC (MSCS) to control

14 4.3. Connection of Control Cable - In case of using MSCS Control signal transmission can be connected by 2 different methods. ( or Ethernet) and Ethernet connection cannot be used simultaneously Connection of Cable Maximum use of with Daisy Chain connection is 30 sets or less, if you need additional connection, use distributor Connection of Ethernet Cable In case of Ethernet connection, the control should be connected to one of sets with Ethernet cable. For the connection between the sets, they should be connected with cables Cable (Direct Cable) Cable (Cross Cable) control HUB or Router (Wireless & Cable) Cable (Direct Cable) Ethernet control

15 4.4. Connection of Control Cable - In case of using the other control program besides MSCS If you use the other screen control program besides MSCS, the signal cable must be connected via MFC (Multi- Function Controller) of. Control signal transmission can be connected by 2 different methods. ( or Ethernet) and Ethernet connection cannot be used simultaneously Connection of Cable The signal cable must be connected via MFC. Maximum use of with Daisy Chain connection is 30 sets or less, if you need additional connection, use distributor Connection of Ethernet Cable If you want to control sets with Ethernet, and MFC can be connected with Ethernet cable and between MFC and the first set and between the other sets should be connected with cable Cable (Cross Cable) New MFC HUB or Router (Wireless & Cable) Ethernet control New MFC Cable (Direct Cable) control

16 4.5. Connection of cable 4.6. Connention of optional accessory Signal Distributor (UXGA : UP TO 165MHz) Signal Distributor Converter New MFC control RS-485 USB Ethernet Caution for Distributor If you want to display HDCP (High-bandwidth Digital Content Protection) applied contents, you must use the distributor that supports HDCP function. HDMI HD-SDI Component S-Video CVBS Video Source Control System

17 4.7. setting of X x Y Identity number () indicates the location of each. When you look at the screens in front of. [ 01] 100 digit 10 digit single digit 5. Setting and operation of MSCS software 5.1. MSCS Installation Insert the Installation CD. You can see following installation start screen Select proper version for your product and start installation MSCS supports Windows 2000, Windows XP and Windows Vista, Windows 7 only Recommended of X x Y screens MSCS Installation start screen MSCS Versions can be changed for function improvement without prior notice. Caution for using MSCS Caution 1. for Picture control, Manual Tracking and so forth can be read by clicking the right button of your mouse on the desired set from MSCS. Please do not use above function together with the other functions When you off AC power, execute power off by MSCS first and disconnect AC power to save your configuration

18 5.2. Start MSCS MSCS is an application program needed to control. When you execute MSCS (v 7.0) for your product at the installation screen, it will create a new folder at C:/Program File/MSCS (v7.0) and an icon on your computer screen Setting of COM Port Com Port connects or disconnects the communication between and. Connect to Com Port via cable. By double clicking the MSCS (v 7.0) icon, the initial screen image of MSCS (v 7.0) will be displayed as shown in the picture. Go to MSCS Menu -> Communication and set Com Port. Click 'Connect' using mouse or press 'Ctrl+C' using keyboard. In order to disconnect communication, click 'Disconnect' using mouse or press 'Ctrl+D' using keyboard. When you use USB-to- converters, you need to set Com Port again, because MSCS uses one of Com Port no. 1 to 30. Available Com Port on the is automatically recognized and displayed. Com Port Configuration Main Image of MSCS (Multi Screen Control system) Baud Rate Bit Parity Stop Bit Flow Control bps(Fixed) 8Bits None 1Bit None

19 5.4. Setting of Port (In case of connecting to a Hub) 5) Type in IP Address. This function is used to control the via PORT. * During the setting process, and control should be connected via cable only. Do not connect ethernet cable. * After setting process, the control should be connected to one of sets with Ethernet cable only. For the connection between the sets, they should be connected with cables. nnetwork IP setting for 1) Execute the Configurator V1.0 from installation CD. 2) Select Com Port and select "OPEN". 6) Click "SET TCP/IP Info". 3) Select of which you want to control. 4) Turn off. 7) Click "GET TCP/IP Info." and Confirm the IP Address. 8) Close the Configurator V

20 5.5. Setting of Port (In case of connecting directly to user's computer) ncheck the network informations 1) Execute the Configurator V1.0 from installation CD. 2) Select Com Port and select "OPEN". 5) Click "GET TCP/IP Info." and check the network informations. 3) Select of which you want to control. 4) Turn off. 6) Input the network information of the user s to be identical with set. However, the final digit of the IP address must be different

21 5.6. Network IP setting for MSCS 1. Execute the MSCS. 2. Select "Menu->Communication -> Setup" or"ctrl+u" to start setup "New design/last design" setting You can see following pop-up window for "New design/last design" when you click "Connect" or press "Ctrl+C" using keyboard after select communication type. New/Last Design Set 3. Select "Socket" radio button. 4. Type in IP Address of. 5. Click "Ping Test" to check status of communication. 6. Close the Commnication setup window Menu Description Serial : Set the serial communication as a default communication. Click "Open New Design" to prepare new configuration. Click "Open Last Design" to go to last design before closing. When the connection is successfully completed after setting Com Port, following Message dialog is displayed. The dialog window will be disappeared in 1 second. Com Port : Set the port of a to communicate with. Baud Rate : Fixed at bps. Caution: Users cannot change the Baud rate. Socket : Set the Ethernet communication. Edit Box : Set the IP address. When the connection is successfully completed after setting Lan Port, following Message dialog is displayed. The dialog window will be disappeared in 1 second. Port Number : Fixed as Caution: Users cannot change the port number. Ping Test: Test the IP address. Communication Setup Connect : Connect the communication

22 5.8. Multi-screen configuration 1. Input the numbers of X and Y X is for the number of row and Y is for column. X and Y can be selected within the range from 1 to 15. The maximum quantity of MSCS control is 100 sets. image of selected numbers of X and Y is displayed in the Screen configuration in one second after setting the number Selecting the command transmission method ONE LCD : Transmit Protocol Command to one. ALL LCD : Transmit the Protocol command sequentially to all connected sets. Broadcast : Transmit the Protocol command simultaneously to all connected sets. In order to control power of specific, use "Power On/Off" button after selecting the specific. Screen Configuration Setting 2. Select one of input sources from, or Video Control - Power On/Off 3. Execution of the configuration. When you click "PLAY"button after selecting input source from Source select and the numbers of X and Y in Configuration, the configuration of is generated as shown in the figure below. Caution Please wait for at least 10 seconds before executing "Power On" command after the first AC power connection. If not, it may cause abnormal behavior. Please disconnect AC power and reconnect in case of abnormal behavior. FO : Check the resolution of the input source. It is displayed at the upper right corner of the screen. Check the signal. If there is no input signal, "No signal" is displayed

23 5.10. Changing the input source Varieties of screen formations are available with screen configuration. Select, or Video at the Input Select menu. 1) If you select and click Play button at the Input Select menu, the input source will be changed from to. In case you do not select a screen and click Play, the input source for the all screen will be changed. 2) Screen formation To make various Input-screen formation, select an input source and click the screen you want in the Screen configuration with the left button of the mouse. 1. Select at the Input Select menu. e.g.) in case is selected 2. Click the screen you want in the Screen configuration with the left button of the mouse. Click the screen you want in the Screen configuration with the left button of the mouse. screen will be changed with. Select at the Input Select menu Input source is not displayed on the MSCS screen, but it is indicated by colors. ( : Yellow : Green Video : Gray)

24 3) Screen Formation with one step. You can make various multi-screen formations with simple movement Slide Control configuration that users can choose is displayed repeatedly. 1. Select an input source at Source Select menu. e.g.) In case you want to select To use Slide Control, go to MSCS Menu -> Control -> Slide Control or press "Ctrl+S" using Keyboard. 2. Click the screen you want in the Screen Configuration with the left button of the mouse and drag. Click the screen you want in the Screen Configuration with the left button of the mouse and drag to the screen you want to include. When you stop dragging, selected screens will be changed to automatically. 1. Make a desirable configuration in "Screen Configurations" 2. Set "Operation Time" in "Slide Control" Click "Add" button to save configuration. The range of "Operation Time" is from 10 seconds to 1 hour

25 3. Save various screen configurations in the same way. 6. Click "Stop" button to end "Slide Control" 4. Click "Slide Start" to display saved screen configurations. Saved screen configurations are displaying for preset time. 7. Save or Load the slide configuration Click "SAVE" button to save user added Slide configuration as "*.ssd" file. Click "LOAD" button to open saved "*.ssd" file. When you load "Slide File", previous slide configuration and new slide configuration must be identical. Caution If they are different, the file cannot be loaded. So, revise the new slide file configuration as previous configuration or save as new file. 5. Check "Repeat" to display saved configuration repeatedly. To view the saved screen configuration, select the list from "List Box." Saved screen protocol is transmitted to by double clicking the list

26 5.12. Picture Control Register values related to display of can be changed. To use Picture Control, go to MSCS Menu -> Control -> Picture Control or press "Ctrl+P" using Keyboard Timer Control Users can decide the time of turning on or off set by timer control. To use this function, click Menu -> Control-> Timer Control or use 'Ctrl +M' keys from the keyboard. In order to control display values, input values directly in "Edit Box" and press Enter key. Or click -/+ button using mouse. Click "Exit" button or press "Ctrl+X" using keyboard to close "Picture Control" window. Color Temp : Change the color temperature of the screen -Normal : Initial setting. Proper for normal video image view. -Studio : Low Color temperature. Proper for broadcasting purpose. Brightness : The range of "Brightness" you can adjust is 0 to 100. Contrast : The range of "Contrast" you can adjust is 0 to 100. Sharpness : The range of "Sharpness" you can adjust is 0 to 28. Dimmong : The range of Dimming you can adjust is 0 to 100 User : Users can adjust color impression with white screen and save or load the adjusted value. - Save - Save User s data file (*.pdt) - Load - Load User s data file (*.pdt) How to set the time of power on or off. Timer Control Dialog a) Select Hour and Minutes of turn on or off b) After setting Power On/Off time, click Add button to add it to Power On/Off List Box. You can save up to 10 settings for Power On/Off. Also, you can delete the saved settings in the List Box one by one with Remove button. If you delete all the settings, click Remove All button. c) Select once for one time use and Daily for daily use, then click 'Start' d) Power on or off signal will be transmitted to at the time of user set. Time Dialog must be activated to use Timer function

27 5.14. Tracking Control Homepage log on and Version Information Alignment adjustment is available when input source is. In order to move to Orion website, go to "Help" of menu bar ->"OrionDisplay HomePage". Go to "Control" in menu bar -> Tracking Control or press "Ctrl+T" using keyboard to run "Tracking" window. Homepage Log on Press "Tracking Auto" button in order to run auto tracking. In case alignment doesn't work through "Tracking Auto" command, user can tune finely through "Manual". Go to "Help" of menu bar -> "About" to check MSCS. Manual Tracking enables users to set Frequency, Phase, LineStart and PixelStart. Select panel which you want to adjust alignment. Detail adjustment steps are as follows. Tracking Manual Window 1) Tune "Phase" until the vertical lines are clearly adjusted.. 2) Tune "LineStart" to adjust vertical alignment. "PixelStart" for horizontal alignment. 3) Adjust "Frequency" if alignment is still wrong. If you adjust "Frequency", repeat step 1) and 2) to fit alignment. Adjustable range is as follows -The range of "Frequency" you can adjust is -50 to 50 -The range of "Phase" you can adjust is 0 to 63 -The range of "Linestart" you can adjust is -23 to 10 Checking MSCS Version -The range of "Pixelstart" you can adjust is -50 to 40 Click "EXIT" button or press "Ctrl+X" using keyboard to close "Tracking" window. When "Tracking" windows is on display, users cannot display "Picture Control" window. Even when "Tracking" window is on display, selecting panel is available by clicking right button of mouse

28 6. Control Method of optional accessory 6.1. New MFC 1) New MFC Connection 1. Connect power. 2. Connect female D-sub to the Com port in a computer. 3. Connect male D-sub to the port in. 4. Install the MFC connected with cable and a power adapter at the location of good Remote controller reception. 5. Set the number of the connected units in advance. The number can be set only by the Remote controller. 2) Set Configuration (e.g. X:5 sets x Y:6 sets) SETTG ON OFF SET 0 9 BROADCAST ON OFF 1 2 Horizontal configuration 1. Press SET button. SET 2. Press Left and Right buttons sequentially to enter the horizontal configuration mode. A B FO FO CONVERTER PUT DTV HDMI VEO S-VEO HDSDI HOR C1 C2 FO AUTO PUT FUNCTION 3. When the 2 LEDs at lower right corner of each 7-segment of lower line in the New MFC are turned on, the horizontal configuration mode is started. VER REMOTE CONTROL HOR HOR "N x M" Configuration New MFC Front VER VER 4. Use the number buttons to set the numbers of sets in horizontal line. e.g. If you want to set 5 for horizontal number, press "0" for ten's place and "5" for one's place HOR Adaoter Jack (5V 1A) AS Connect USB Connect Ethernet Connect Connect VER New MFC Rear Connect 5. Pres SET button to finish the horizontal configuration mode SET

29 ON OFF BROADCAST ON Vertical configuration 1. Press SET button Converter To use Converter, go to MSCS Menu Device Converter or press "Ctrl+V" using Keyboard. SETTG SET A OFF 1 2 B SET 2. Press Up and Down buttons sequentially to enter the vertical configuration mode. FO FO CONVERTER PUT DTV HDMI VEO S-VEO HDSDI C1 C2 FO AUTO PUT FUNCTION 3. When the 2 LEDs at lower right corner of each 7-segment of lower line in the New MFC are turned on, the vertical configuration mode is started. REMOTE CONTROL HOR HOR VER VER 4. Use the number buttons to set the numbers of sets in horizontal line. e.g. If you want to set 6 for vertical number, press "0" for ten's place and "6" for one's place HOR VER 5. Pres SET button to finish the vertical configuration mode. Converter Dialog SET

30 1) Set the of Converter. The can be selected from 1 to 9. 4) Output Resolution Set the output resolution of Converter. Resolution frequency 640 x Hz / 85Hz 800 x Hz / 60Hz / 85Hz 853 x Hz / 60Hz 2) CMND Select the channel of converter to control. One of Channel 1(C1), Channel 2(C2), and ALL Channel can be selected x Hz / 85Hz 1280 x Hz / 60Hz 1600 x Hz / 60Hz 1600 x Hz / 60Hz 1706 x Hz 1920 x 1080p 50Hz / 60Hz Set : Set the output resolution. 3) Input Mode Select the input mode of Converter. One of, HDMI, HDSDI,, DTV, S-VEO, and VEO can be selected. Set : Select one mode from 7 Input Modes and execute. 5) OSD Information The converter input and input resolution are displayed on the screen. 6) Aspect Ratio Set or change the screen ratio (Horizontal: Vertical) 16 : 9 : Set the screen ratio as 16:9 wide screen. 4 : 3 : Set the screen ratio as 4:3 LB(Letter Box) : Expand the screen image to remove the black patterns at the top and bottom portions of the screen. LBS(Letter Box Subtitle) : Expand the screen with the subtitle to the top portion. (The bottom portion remains with black pattern)

31 7) Key Lock Mode Lock the front key of Converter not to turn On or Off. 9) Picture Control Control the Brightness, Contrast, Sharpness, Color, and Tint of the Converter. Brightness : The range of "Brightness" you can adjust is 0 to 100. Contrast : The range of "Contrast" you can adjust is 0 to ) Status Display the Converter status (Input Source, Input Resolution, Output Resolution, Aspect Ratio, PIP Mode, Test Pattern, Key Lock, FreeRun/Lock, Firmware Version, MSCS Version information) Sharpness : The range of "Sharpness" you can adjust is 0 to 28. Color : The range of "Color" you can adjust is 0 to 100. Tint : The range of "Tint" you can adjust is 0 to 90. Firmware Default : Initialize the adjusted values to the default values

32 10) Pattern Select the Test Pattern (Red, Blue, 8-Color, 16-Gray, Green, White, White (10%), Screen) Set : Set or change the Pattern. 12) Tracking Control the Screen size, sharpness, and position of Converter with input mode. In case alignment doesn't work through "Tracking Auto" command, users can tune finely through "Manual Tracking". "Manual Tracking" window enables users to set Frequency, Phase, LineStart and PixelStart. Detail adjustment steps are as follows. 1) Tune "Phase" until the vertical lines are clearly adjusted.. 2) Tune "LineStart" to adjust vertical alignment. "PixelStart" for horizontal alignment. 3) Adjust "Frequency" if alignment is still wrong. If you adjust "Frequency", repeat step 1) and 2) to fit alignment. Adjustable range is as follows Frequency : The range of "Frequency" you can adjust is -50 to 50 Phase : The range of "Phase" you can adjust is 0 to 63 Linestart : The range of "Linestart" you can adjust is -23 to 10 Pixelstart : The range of "Pixelstart" you can adjust is -50 to 40 Auto Tracking : Automatic alignment for Converter screens. 11) Lock/FreeRun Auto Calibration : Automatic color control for Converter screen. Lock : Default setting. It is used when is configured as the default display. If the vertical frequency of input signal and out signal is identical, output is generated according to vertical synchronization. FreeRun : This function is used when the default display is not and screen image is not displayed. It generates its own output vertical frequency regardless of input signal. If screen image is displayed, use Lock mode. Lock/FreeRun can be configured by the keypad of converter besides MSCS. While Menu OSD is not displayed, FreeRun mode can be selected by pressing UP key and Lock mode by DOWN key

33 7. MSCS Protocol 13) PIP (Picture In Picture) A variety of images can be displayed with the PIP function of converter. To activate PIP, click "PIP" in the Mode. The position of sub-picture can be controlled by clicking - / + buttons increase or decrease the number or directly type in the numbers at Edit box. 1. Introduction This chapter contains the communication protocol between LCD and its control devices such as computer for better use of the product. However, it does not include detailed technical matters. It rather focuses on the brief functional explanation and communication protocol. Various input sources can be used. To set the sub-input, click the sub-input combo box and select sub-input. Controller (Computer) Tx/Rx Line :1 :2 :N-1 :N Main screen and sub-screen can be swapped with the PIP Swap function. Press "Set" button at the right side of "PIP Swap." If you want to return to previous screen, press "Normal" button at the right side of "PIP Swap." :N+1 :N+N Mode : Normal mode - Normal screen without PIP (PIP Off) PIP mode-sub-screen is displayed at the lower right corner of the screen. (PIP On) Position : Horizontal - Adjust the horizontal location of PIP. Adjustable range 0~100 Vertical - Adjust the vertical location of PIP. Adjustable range 0~100 Sub Input : Set the input for PIP. One of, HDMI, HDSDI,, DTV, S-VEO, and VEO can be selected for sub-input. According to the main input, the sub-input can be restricted. If the main input is a digital input such as, HDMI or HD-SDI, the sub-input should be an analog input such as, DTV, S-VEO or Video. If the main input is an analog input the sub-input should be a digital input. PIP Swap : OFF - Return to previous locations of swapped Main Source Input screen and Sub Source Input screen. ON - Exchange the locations of Main Source Input screen and Sub Source Input screen Communication Setting Transmission & Reception type Asynchronous Serial Communication 2. Protocol Format :(M-2)N+1 :(M-2)N+N :(M-1)N :(M-1)N+2 :(M-1)N+N-1 :MXN The connection can be variable based on environment or the users intention. < Communication connection diagram > Connection type Baudrate Bits Parity Stop Bits Flow Control Daisy Chain None 1 None 2.1. Send To LCD STX Command Length 1 byte 1 byte 1 byte Variable 1 byte Other 1 byte 1 byte N byte This is how to send commands to LCD. Only the set of the designated is working according to the "Command." But, if the "" value is "0", all sets are working according to command as "Broadcast". STX(0x02): The initial code. It means the beginning of Protocol. (Fixed value) Command: Code for actual operation. (Variable) Length: the length of "" area. (Variable: 0~255) : the areas for "" and the other (Variable) : It is a code to distinguish LCD sets. Its range is "0" to "255". If the is "0," it means Broadcast command.(variable) (0x01) : This is the scaler code. (0x03): The end of the code. (Fixed value)

34 2.2. Receive From LCD 1 byte 1 byte 1 byte Variable 1 byte 1 byte Other 1 byte 1 byte N byte Response by a certain command from the designated set among sets. The difference from "Send to LCD" is "Check sum". STX(0x02): The initial code. It means the beginning of Protocol. (Fixed value) Command: Code for actual operation. (Variable) Length: the length of "" area. (Variable: 0~255) : the areas for "" and the other (Variable) : Set identification (0~255) (Variable) (0x01) : This is the scaler code. Check sum: execute "Not" operation after adding all the values in "STX~" area. (0x03): The end of the code. (Fixed value)) Communication Sequence * Wait for 50msec for response after sending the command. If there is no response, it is recommended to resend the command. * It is recommended that not sending the other command or changing input resolution during command transmission. 3. Command 3.1. Power On Command transmission Responsetransmission Command for Power On: Operative status It is available only during Power Off(Stand-by) status. CMD: 0x40 Send to A. Normal command Value 0x02 0x40 0x02 Variable 0x01 0x03 * range(program): 0x01(1) ~ 0xFF(255) B. Broadcast command : Value 0x02 0x40 0x01 0x00 0x03 * Make all LCD do the same operation. But, there will be no return communication. (One way command) Receive from Value 0x02 0x40 0x02 Variable 0x01 Variable 0x03 * range (Program): 0x01(1) ~ 0xFF(255) * Check sum: execute "Not" operation after adding all the values in "STX~" area Power Off Command for Power Off : Stand-by status It is available only during Power On (Operative) status. CMD: 0x41 Send to A. Normal command Value 0x02 0x41 0x02 Variable 0x01 0x03 * range(program): 0x01(1) ~ 0xFF(255) B. Broadcast command : Value 0x02 0x41 0x01 0x00 0x03 * All LCD will do the same operation simultaneously. But, there will be no return communication. (One way command) Receive from Value 0x02 0x41 0x02 Variable 0x01 Variable 0x03 * range (Program): 0x01(1) ~ 0xFF(255) * Check sum: execute "Not" operation after adding all the values in "STX~" area Multi-Scale Command for expanding the screen of. It is available only on Power On (Operative) status. CMD: 0XDD (), 0XDE(), 0XE2(VEO) Send to A. Normal command XY P Value 0x02 Variable 0x04 Variable 0x01 Variable Variable 0x03 * range (Program): 0x01(1) ~ 0xFF(255) * XY: The number of horizontal axis (X)/ the number of vertical axis(y); upper 4 bits -X (Max:15), Lower 4bits - Y (Max: 15) * P: the location of expanded screen B. Broadcast command XY S X Value 0x02 Variable 0x04 0x00 Variable Variable Variable 0x03 * : 0x00 * XY: The number of sets in horizontal line(x), the number of sets in vertical line(y) The top 4bits - X (Max: 15), the bottom 4bits - Y (Max: 15) / 1:1 screen ratio (Full screen) is 0x11 * S: The of to be expanded in top left position, 1:1 screen ratio (Full screen) is 0x

35 * X: The number of all X axis line, 1:1 screen ratio (Full screen) is 0x01 * Make all LCD do the same operation. But, there will be no return communication. (One way command) Broadcast command: e.g.) In case of 5x5 formation a b c d e Input-Mode Change Command for changing input mode without screen scaling It is available only on Power On (Operative) status. CMD: 0xDD(), 0XDE(), 0XE2(Video) Send to A. Normal Command Value 0x02 Variable 0x02 Variable 0X01 0x03 * range(program): 0x01(1) ~ 0xFF(255) B. Broadcast Command a 0x02(STX) 0xDD(CMD) 0x04(Length) 0x00() 0x33(XY) 0x01(S) 0x05(X) 0x03() b 0x02(STX) 0xDD(CMD) 0x04(Length) 0x00() 0x33(XY) 0x0D(S) 0x05(X) 0x03() c 0x02(STX) 0xDD(CMD) 0x04(Length) 0x00() 0x22(XY) 0x04(S) 0x05(X) 0x03() d 0x02(STX) 0xDD(CMD) 0x04(Length) 0x00() 0x41(XY) 0x0B(S) 0x05(X) 0x03() e 0x02(STX) 0xDD(CMD) 0x04(Length) 0x00() 0x11(XY) 0x00(S) 0x01(X) 0x03() Receive from Value 0x02 Variable 0x02 Variable 0x01 Variable 0x03 * range (Program): 0x01(1) ~ 0xFF(255) * : execute "Not" operation after adding all the values in "STX~" area Infomation Command for displaying the information on the screen (Input source and resolution by OSD) It is available only on Power On (Operative) status. CMD: 0x42 Send to A. Normal command Value 0x02 0x42 0x02 Variable 0X01 0x03 * range(program): 0x01(1) ~ 0xFF(255) B. Broadcast command : Value 0x02 0x42 0x01 0x00 0x03 * All LCD will do the same operation simultaneously. But, there will be no return communication. (One way command) Receive from Value 0x02 0x40 0x02 Variable 0X01 Variable 0x03 : Value 0x02 Variable 0x01 0x00 0x03 * Make all LCD (/Slave) do the same operation. But, there will be no return communication. (One way command) Receive from Value 0x02 Variable 0x02 Variable 0X01 Variable 0x03 * range (Program): 0x01(1) ~ 0xFF(255) * : execute "Not" operation after adding all the values in "STX~" area Global Offset Command for removing the image data in seam area (On) or displaying all the data on the screen (Off) It is available only on Power On (Operative) status. CMD: 0x74(On), 0x73(Off) Send to A. Normal Command Value 0x02 Variable 0x02 Variable 0X01 0x03 * range(program): 0x01(1) ~ 0xFF(255) B. Broadcast Command : Value 0x02 Variable 0x01 0x00 0x03 * Make all LCD (/Slave) do the same operation. But, there will be no return communication. (One way command) Receive from Value 0x02 Variable 0x02 Variable 0X01 Variable 0x03 * range (Program): 0x01(1) ~ 0xFF(255) * : execute "Not" operation after adding all the values in "STX~" area. * range (Program): 0x01(1) ~ 0xFF(255) * : execute "Not" operation after adding all the values in "STX~" area