LCD MONITOR. 27 Wide LED Monitor User Manual. User Manual P276L

Transcription

1 LCD MONITOR 27 Wide LED Monitor User Manual User Manual P276L

2 Precautions Precautions Warning The following information will help you avoid the risk of electric shock, serious injury or death. Power cord AC outlet Plug the power cord into a properly grounded outlet. shock. If you hear a noise or smell smoke from the computer or adaptor, unplug the power cord immediately, and call the service center. Do not overload an electrical outlet with too many devices. There is the risk of fire. Do not allow any object or liquid to enter inside the monitor. shock, fire or damage to the monitor. Caution Do not attempt to disassemble, fix or modify the monitor. The following information will help you avoid the risk of minor or moderate injury or damage to the monitor. Do not unplug from the outlet by pulling the power cord or when your hands are wet. Do not bend the power cord excessively nor place heavy objects on it. Keep children and pets away from the power cord as they may damage the power cord. There is the risk of electric Do not use a damaged power cord or plug. Make sure the plug fits snugly into the outlet. Use a proper voltage/current level indicated Do not clean the LCD with abrasive chemicals. There is the risk of damage to the LCD. Do not scratch and damage the LCD with sharp objects. Do not expose the monitor to the direct sun light. Keep the monitor away from high temperature, humidity, and dust. Operating environment =10~40degrees Celsius Operating environment =20~80relative humidity. Do not block the fan louvers. There is the risk of fire or damage to the monitor. Keep the monitor away from objects and electrical appliances that may generate electromagnetic fields. Place the monitor on a flat, stable surface. The monitor may fall and there is the risk of damage or injury. Unplug the power cord when the monitor is not in use for a long period of time. The socket - outlet shall be installed near the equipment and shall be easily accessible.

3 Monitor Stand * Push the hook until hanging DISPLAY PORT DP Cable DVI DVI-D Cable Power Cord 15-pin Dsub Cable Install CD / Quick guide VGA AUDIO IN 15-pin D-Sub Signal Cable AUDIO Cable 1 For Audio Model Only. 24pin DVI Cable Audio Cable Display port Cable 1 : For Audio Model Only. 4 5

4 UP, DOWN DOWN Volume MENU UP, DOWN UP, DOWN UP * VGA Only PICTURE SCALE Change Ratio (Wide or Normal) H.POSITION V.POSITION SOURCE Change Input Signal AUTO ADJUST LCD LCD COLOR COLOR TEMP Select the most comfortable color tone to your eyes STANDARD -> REDDISH -> BLUISH -> USER * STANDARD : for general color tone. * REDDISH : for reddish color with warm tone. * BLUISH : for bluish color with cool tone. * USER : for adjusting degree of RGB as user wants RED,GREEN,BLUE For adjusting the each color as user wants. AUTO COLOR Automatically set optimum screen. FUNCTION INPUT SELECT To switch current and other input source. ASPECT RATIO 9 DCR Turn on / off DCR Function. PICTURE OSD RECALL Recall the saved initial data. BRIGHTNESS 90 H.POSITION CONTRAST 60 H.POSITION 50 V.POSITION TIMER Adjusts OSD display time on the screen. V.POSITION 50 LANGUAGE Select OSD language.( 5 langauges ) PHASE 76 CLOCK 50 : Not available in DVI and DP mode. AUTO ADJUST 1920x1080 VGA

5 800 x x x x x x x p 576p 720p 1080p 35.2 khz 37.8 khz 48.3 khz 60.0 khz 63.9 khz 55.9 khz 64.7 khz 67.5 khz 56 Hz DVI(HDCP) Under 24W(Typ) Less then 0.5W 8 9

6 Specification 27 Wide mm(H) x mm(V) mm(H) x mm(V) 1920 x 1080@60Hz 170º/160º(H/V) 16.7M KHz ~ 80KHz 60Hz 75Hz DVI-D, AUDIO,DISPLAY PORT,DSUB < 24W (Typ.) < 0.5W AC:100V-240V Hz, 1.5A 1Wx2 1 : For Audio Model Only

7 FCC compliance Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Change or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment under FCC rules. 12