AUDIO/VIDEO CONTROL RECEIVER RX-D201S INSTRUCTIONS LVT B [B]

Size: px
Start display at page:

Download "AUDIO/VIDEO CONTROL RECEIVER RX-D201S INSTRUCTIONS LVT B [B]"

Transcription

1 AUDIO/VIDEO CONTO ECEIVE X-D201S INSTUCTIONS VT B [B]

2 Warnings, Cautions and Others IMPOTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SUE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below: IMPOTANT: DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow. The wires in the mains lead on this product are coloured in accordance with the following code: Blue : Brown : Neutral ive As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter or coloured red. Caution STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) Do not place any naked flame sources, such as lighted candles, on the apparatus. When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly. Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids such as vases, shall be placed on the apparatus. IF IN DOUBT - CONSUT A COMPETENT EECTICIAN. Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, imited is: JVC Technology Centre Europe GmbH Company name changed in: JVC Technical Services Europe GmbH Postfach Friedberg Germany G-1

3 Caution: Proper Ventilation To avoid risk of electric shock and fire and to protect from damage. ocate the apparatus as follows: Front: No obstructions open spacing. Sides: No obstructions in 10 cm from the sides. Top: No obstructions in 10 cm from the top. Back: No obstructions in 15 cm from the back. Bottom: No obstructions, place on the level surface. In addition, maintain the best possible air circulation as illustrated. Spacing 15 cm or more Wall or obstructions X-D201S Front Stand height 15 cm or more Floor G-2

4 SAFETY INSTUCTIONS SOME DOS AND DON TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Do read the operating instructions before you attempt to use the equipment. Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer s instructions. Switch off and withdraw the mains plug when making or changing connections. Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. Do be careful with glass panels or doors on equipment. DON T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DON T remove any fixed cover as this may expose dangerous voltages. DON T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. DON T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving. DON T listen to headphones at high volume as such use can permanently damage your hearing. DON T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. DON T use makeshift stands and NEVE fix legs with wood screws to ensure complete safety always fit the manufacturer s approved stand or legs with the fixings provided according to the instructions. DON T allow electrical equipment to be exposed to rain or moisture. ABOVE A NEVE let anyone, especially children, push anything into holes, slots or any other opening in the case this could result in a fatal electrical shock.; NEVE guess or take chances with electrical equipment of any kind it is better to be safe than sorry! G-3

5 Table of Contents Parts identification... 2 Getting started... 4 Before Installation... 4 Checking the supplied accessories... 4 Putting batteries in the remote control... 4 Connecting the FM and AM (MW) antennas... 5 Connecting the speakers... 6 Connecting video components... 7 USB connection Connecting the power cord Basic operations Turn on the power Select the source to play Adjust the volume Turning off the sounds temporarily Changing the display brightness Turning off the power with the Sleep Timer Basic settings Setting the speaker information easily Quick Speaker Setup Basic setting items Operating procedure Setting the speakers Activating the EX/ES/PIIx setting EX/ES/PIIx Selecting the main or sub channel DUA MONO Setting bass sound Using the Midnight mode MIDNIGHT MODE Setting the digital input (DIGITA IN) terminals DIGITA IN 1/ Setting the Auto Function mode AUTO MODE Selecting the component video input mode DVD VIDEO IN/VIDEO VIDEOIN Sound adjustments Basic adjustment items Operating procedure Adjusting the speaker output levels Adjusting the equalization patterns D EQ 63Hz/250Hz/1kHz/4kHz/16kHz Adjusting the bass sounds Adjusting the sound parameters for the Surround/DSP modes Tuner operations Tuning in to stations manually Using preset tuning Selecting the FM reception mode Using the adio Data System (DS) to receive FM stations Searching for a program by PTY codes Switching to broadcast program of your choice temporarily Creating realistic sound fields eproducing theatre ambience Introducing the Surround modes Introducing the DSP modes Using the Surround/DSP modes Activating the Surround/DSP modes Operating other JVC products Operating other manufacturers products Troubleshooting Specifications

6 Parts identification DV TEST 1 TV A/V CONTO ECEIVE EFFECT *CENTE *SUBWF 4 C.TONE 7 *FONT *FONT *D.EQ FEQ*S BACK *S BACK 10 AUDIO DV/DVD VC TV/STB ETUN TA/NEWS/INFO 100 SUOUND SOUND *EVE EC PAUSE MEMOY FM MODE DV/DVD DVD 2 5 *SU 8 0 VC USB TV VOUME CHANNE ENTE 3 6 *SU 9 10 VIDEO FM/AM TV/VIDEO MUTING STANDBY/ON DISPAY MODE EX/ES/P x *EVE MENU TUNING/EW PTY-PTY SEACH-PTY FF/TUNING DIMME SEEP STB CONT / DIGITA p q w e r t y u i emote control See pages in parentheses for details. 1 DV/DVD mode selector (37, 40) 2 Numeric buttons (26, 36 40) 1 10, 0, +10, 100+ Adjusting buttons for speaker and subwoofer output level and sound adjustment (22) TEST, FONT, FONT, EFFECT, CENTE, SUBWF, C. TONE, SU, SU, D. EQ FEQ, S BACK, S BACK ETUN button (36) 3 SOUND button (22 24) 4 Operating buttons for DVD recorder or DVD player* cursor buttons (3, 2, 5, ), ENTE (37, 40) Adjusting buttons for speakers and subwoofer output level and D. EQ FEQ level (22) EVE9, EVE( Operating buttons for DS (27, 28, 30) ( PTY, PTY 9, TA/NEWS/INFO, PTY SEACH, DISPAY MODE 5 MENU button for DVD recorder or DVD player* (37, 40) 6 Operating buttons for video components (36, 37, 39, 40) 4, 3,, 7, 8, EW, FF, EC PAUSE Operating buttons for tuner (25, 26) ( TUNING, TUNING 9, MEMOY, FM MODE 7 Source selecting buttons (12, 25, 36 40) DV/DVD, VC, VIDEO, TV, USB, FM/AM 8 CHANNE +/ buttons (36 40) 9 TV VOUME +/ buttons (36, 38) p STANDBY/ON buttons (12, 36 40) AUDIO, DV/DVD, VC, TV/STB q SUOUND button (35) w EX/ES/PIIx button (18) e DIMME button (14) r SEEP button (14) t STB CONT button (40) y /DIGITA button (12) u TV/VIDEO button (36, 38) i VOUME +/ button (13) o MUTING button (14) * These buttons can be used for operating a JVC DVD recorder or DVD player with the mode selector set to DV or DVD (see page 37). If these buttons do not function normally, use the remote control supplied with your DVD recorder or DVD player. efer also to the manuals supplied with the DVD recorder or DVD player for details. VOUME EMOTE CONTO M-SXD201 o When operating a DVD recorder (for JVC products ONY), set the mode selector (1) to DV. When operating a DVD player, set the mode selector (1) to DVD. 2

7 See pages in parentheses for details. Front panel AUDIO/VIDEO CONTO ECEIVE SOUCE SEECTO / MUTI JOG MASTE VOUME STANDBY/ON DIMME SETTING ADJUST SUOUND DV / DVD VC VIDEO TV USB FM/AM SET / TUNE PESET PHONES USB p q w e 1 STANDBY/ON button and standby lamp (12) 2 DIMME button (14) 3 SETTING button (15, 17) 4 ADJUST button (21) 5 SUOUND button (35) 6 Source lamps DV/DVD, VC, VIDEO, TV, USB, FM/AM 7 SET button (15, 17, 21) TUNE PESET button (26) 8 SOUCE SEECTO (12, 26) MUTI JOG (15, 17, 21, 26, 35) 9 MASTE VOUME control (13) p PHONES jack (13) q USB terminal (10) w Display window (see below) e emote sensor (4) Display window =~ DIGITA AUTO INEA PCM DIGITA 96 / 24 DUA MONO C S.WF FE S S S SB SB SB AUTO SU HEADPHONE P x NEO : 6 DSP 3D-PHONIC VITUA SB DS TA NEWS INFO TUNED STEEO AUTO MUTING SEEP AUTO MODE DIGITA EQ C.TONE B.BOOST MIDNIGHT INPUT ATT MHz #$ % ^ & * ( ) 1 indicator (13) 2 DUA MONO indicator (19) 3 AUTO SU (surround) indicator (35) 4 HEADPHONE indicator (13, 32) 5 DS operations indicators (27, 30) DS, TA, NEWS, INFO 6 Tuner operation indicators (25) TUNED, STEEO 7 DIGITA EQ indicator (22) 8 AUTO MUTING indicator (26) 9 C.TONE indicator (24) 0 B.BOOST indicator (23) - MIDNIGHT indicator (19) = INPUT ATT (attenuate) indicator (23) ~ SEEP indicator (14)! Digital signal format indicators (13, 31, 32) DIGITA AUTO, INEA PCM,,, Signal and speaker indicators (14) # NEO:6 indicator (32) $ VITUA SB indicator (34) % 3D-PHONIC indicator (32, 33) ^ DSP indicator (33, 34) & and indicator (31 33) * AUTO MODE indicators (20) ( Main display ) Frequency unit indicators MHz (for FM stations), khz (for AM (MW) stations) ear panel COMPONENT VIDEO Y PB P AV IN/OUT TV DIGITA IN 1(DV/DVD) 2(VIDEO) VIDEO AUDIO VIDEO IN VIDEO IN DV/DVD IN SUOUND BACK SUOUND SPEAKES SPEAKES IGHT EFT IGHT EFT AM OOP ANTENNA FM 75 AM EXT COAXIA CENTE FONT SPEAKE SPEAKES IGHT EFT SUBWOOFE OUT VIDEO IN DV/DVD IN MONITO OUT VC DV/DVD VIDEO S-VIDEO CAUTION:SPEAKE IMPEDANCE Power cord (11) 2 COMPONENT VIDEO (Y, PB, P) jacks (8, 9) VIDEO IN, DV/DVD IN, MONITO OUT 3 AV IN/OUT terminals (7) TV, VC, DV/DVD 4 DIGITA IN terminals (10) Coaxial: 1(DV/DVD) Optical: 2(VIDEO) 5 ANTENNA terminals (5) 6 SUBWOOFE OUT jack (6) 7 VIDEO jacks (9) VIDEO (composite video), S-VIDEO 8 AUDIO jacks (8, 9) VIDEO IN, DV/DVD IN 9 Speakers terminals (6) SUOUND BACK SPEAKES, SUOUND SPEAKES, CENTE SPEAKE, FONT SPEAKES 3

8 Getting started Putting batteries in the remote control Before using the remote control, put two supplied batteries first Before Installation General precautions Be sure your hands are dry. Turn the power off to all components. ead the manuals supplied with the components you are going to connect. ocations Install the receiver in a location that is level and protected from moisture and dust. The temperature around the receiver must be between 5 C and 35 C. Make sure there is good ventilation around the receiver. Poor ventilation could cause overheating and damage the receiver. eave sufficient distance between the receiver and the TV. Handling the receiver Do not insert any metal object into the receiver. Do not disassemble the receiver or remove screws, covers, or cabinet. Do not expose the receiver to rain or moisture. Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord. When you are away on travel or otherwise for an extended period or time, remove the plug from the wall outlet. A small amount of power is always consumed while the power cord is connected to the wall outlet. 1 Press and slide the battery cover on the back of the remote control. 2 Insert batteries. Make sure to match the polarity: (+) to (+) and ( ) to ( ). 3 eplace the cover. If the range or effectiveness of the remote control decreases, replace the batteries. Use two 6(SUM-3)/AA(15F) type dry-cell batteries. Supplied butteries are for initial setup. eplace for continued use. CAUTION: Follow these precautions to avoid leaking or cracking cells: Place batteries in the remote control so they match the polarity: (+) to (+) and ( ) to ( ). Use the correct type of batteries. Batteries that look similar may differ in voltage. Always replace both batteries at the same time. Do not expose batteries to heat or flame. When using the remote control, aim the remote control directly at the remote sensor on the front panel. emote sensor The receiver has a built-in cooling fan which operates while the receiver is turned on. Be sure to leave enough ventilation to obtain sufficient cooling effect. CAUTION: Do not connect the AC power plug to the wall outlet until all connections are completed. Checking the supplied accessories Check to be sure you have all of the following supplied accessories. If anything is missing, contact your dealer immediately. emote control ( 1) Batteries ( 2) AM (MW) loop antenna ( 1) FM antenna ( 1) 4

9 AM EXT Connecting the FM and AM (MW) antennas Do not connect the AC power plug to the wall outlet until all connections are completed. AM (MW) loop antenna (supplied) If FM reception is poor, connect an outdoor FM antenna (not supplied). Snap the tabs on the loop into the slots of the base to assemble the AM (MW) loop antenna. AM OOP ANTENNA If AM (MW) reception is poor, connect an outdoor single vinylcovered wire (not supplied). AM EXT FM 75 COAXIA FM antenna (supplied) ANTENNA AM (MW) antenna connection Connect the AM (MW) loop antenna supplied to the AM OOP terminals. Connect the white cord to the AM EXT terminal, and connect the black cord to the H terminal. Turn the loop until you have the best reception. If the reception is poor, connect an outdoor single vinyl-covered wire (not supplied) to the AM EXT terminal. Keep the AM (MW) loop antenna connected. NOTES If the AM (MW) loop antenna wire is covered with vinyl, remove the vinyl while twisting it as shown on the right. Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. This could cause poor reception. FM antenna connection Connect the FM antenna supplied to the FM 75 Ω COAXIA terminal as a temporary measure. Extend the supplied FM antenna horizontally. If the reception is poor, connect an outdoor FM antenna (not supplied). Before attaching a 75 Ω coaxial cable with a connector (IEC or DIN 45325), disconnect the supplied FM antenna. 5

10 AM EXT Connecting the speakers Do not connect the AC power plug to the wall outlet until all connections are completed. Speaker ayout Diagram SW C S S Center speaker (C) SB (*SB) SB SUBWOOFE OUT ight surround back speaker (SB) SUOUND BACK SPEAKES IGHT EFT SUOUND SPEAKES IGHT EFT CENTE SPEAKE CAUTION:SPEAKE IMPEDANCE 6-16 FONT SPEAKES IGHT EFT *eft surround back speaker (SB) ight surround speaker (S) eft surround speaker (S) eft front speaker () ight front speaker () Powered subwoofer (SW) CAUTIONS: Use speakers with the SPEAKE IMPEDANCE indicated by the speaker terminals (6 Ω 16 Ω). DO NOT connect more than one speaker to one speaker terminal. Connecting the speakers Turn off all components before making connections Twist and remove the insulation at the end of each speaker cord. 2 Open the terminal (1), then insert the speaker cord (2). For each speaker, connect the (+) and ( ) terminals on the rear panel to the (+) and ( ) terminals marked on the speakers. 3 Close the terminal *When using a single speaker for the surround back speaker You can enjoy the surround sound by one surround back speaker. When using one surround back speaker, set SB OUT to <1SPK> (see page 17) and connect the surround back speaker to the left surround back speaker terminal. (No sound comes from the speaker if you connect it to the right surround back speaker terminal.) Connecting the powered subwoofer By connecting a subwoofer, you can enhance the bass or reproduce the original FE signals recorded in digital software. Connect the input jack of a powered subwoofer to the SUBWOOFE OUT jack on the rear panel, using a cord with CA pin plugs (not supplied). efer also to the manual supplied with your subwoofer. After connecting all the speakers and/or a subwoofer, set the speaker setting information properly to obtain the best possible surround effect. For details, see pages 15 to 19. NOTE You can place a subwoofer wherever you like since bass sound is non-directional. Normally place it in front of you. 6

11 AM EXT Connecting video components SCAT connection Do not connect the AC power plug to the wall outlet until all connections are completed. You can enjoy pictures and sounds from playback components simply by connecting with the SCAT cable. If your video components have digital output terminal, also connect them using the digital terminals explained in Digital connection (see page 10). CAUTION: If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted. DO NOT use a TV through a VC or a TV with a built-in VC; otherwise, the picture may be distorted. Turn off all components before making connections. Illustrations of the input/output terminals are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on the rear vary among different components. AV IN/OUT TV VC DV/DVD TV SCAT cable (not supplied) DVD recorder or DVD player NOTES Select the analogue input mode. See Selecting the analogue or digital input mode on page 12. When the TV is equipped with multiple SCAT terminals, refer to the TV manual to check the available video signals for each terminal, then connect the SCAT cable correctly. VC Input Output SCAT Terminal Specifications Terminal name TV VC DV/DVD Audio / Composite Video S-video (Y/C) GB Audio / Composite *1*2 *1*2 *1*2 Video S-video (Y/C) *2 GB *2 T-V INK *3 *3 *3 : Available, : Not available *1 The signals input from a SCAT terminal cannot be output through the same SCAT terminal. *2 The video format of the output video signals are consistent with that of the input video signals. For example, if S-video signals are input to this receiver, no signals other than S- video signals can be output from this receiver. efer to the manuals supplied with the video components to check the setting of the input/output video signals. *3 The signals for the T-V INK function are always going through the receiver. CONTINUED ON THE NEXT PAGE 7

12 AM EXT For TV and video format This receiver cannot convert the video signals. When the video signal of one video component is different from that of the other (for example, one is S-video, the other is Composite), you may not see the pictures appropriately. In this case, unify the video signals of all the video components, or you need to switch the video signal of TV each time you change the source. For an analogue decoder To watch through or to record a scrambled program on your VC, connect the analogue decoder to your VC and select the scrambled channel on your VC. If there is not an appropriate terminal for the decoder connection on your VC, connect the decoder to your TV. efer also to the manuals supplied with these components. For T-V INK You can use the T-V INK function if you connect a T-V INK compatible TV and VC to this receiver with a fully wired SCAT cables. For details on T-V INK, refer also to the manuals supplied with the TV and the VC. Connect a SCAT cable to EXT-2 terminal on the JVC s T-V INK compatible TV for the T-V INK function. Some video components support the data communication like T-V INK. For complete details, refer also to the manuals supplied with these components. Audio/video connection In addition to the SCAT terminals, this receiver is equipped with the following video terminals: Component video input/output: VIDEO IN, DV/DVD IN, MONITO OUT Composite and S-video input: VIDEO IN IMPOTANT The component video signals from the COMPONENT VIDEO jacks are transmitted only through the MONITO OUT jacks. Therefore, if the TV is connected to the receiver through the SCAT terminal (TV) and a playing video component is connected to the receiver through the component video jacks (VIDEO IN or DV/DVD IN), you cannot view the playback picture on the TV. 7 Connecting a DVD recorder or DVD player to the DV/DVD IN jacks To fully enjoy Dolby Digital and DTS multi-channel software (including Dual Mono software), connect the DVD recorder or DVD player through the digital input terminals (see page 10). When you connect a DVD recorder or DVD player with its stereo output jacks: Turn off all components before making connections. COMPONENT VIDEO Y PB Green Blue Component video cable (not supplied) P ed VIDEO IN DV/DVD IN MONITO OUT DVD recorder or DVD player Å AUDIO VIDEO IN DV/DVD IN White ı ed Stereo audio cable (not supplied) NOTES Do not connect different components to the AUDIO DV/DVD IN jacks and AV IN/ OUT (SCAT) DV/DVD terminal (see page 7); otherwise, sounds from both components are come out of the speakers at the same time. Select the analogue input mode. See Selecting the analogue or digital input mode on page 12. You can enjoy digital sound if using a digital coaxial or optical cable. When shipped from the factory, the audio input mode for a DVD recorder and DVD player is set to use the digital coaxial terminal (DIGITA IN 1 (DV/DVD)). For details of digital connection, see page 10. When connecting a DVD recorder or DVD player to the component video input jacks, select the component video input mode (DVD VIDEO IN) correctly. If you do not, you cannot view the playback picture on the TV. See page 20 for details. Å To component video output Connect Y, PB, and P correctly. ı To left/right audio channel output 8

13 AM EXT AM EXT Do not connect the AC power plug to the wall outlet until all connections are completed. 7 Connecting another video component to the VIDEO IN jacks If your video components have S-video (Y/C-separation) and/or component video (Y, PB, P) terminals, connect them using an S-video cable (not supplied) and/or component video cable (not supplied). By using these jacks, you can get better picture quality in the order: Component video > S-video > Composite video To enjoy the playback from the component connected to these jacks, select VIDEO as the source (see page 12). COMPONENT VIDEO Y PB Green Blue Turn off all components before making connections. Component video cable (not supplied) P ed VIDEO IN DV/DVD IN MONITO OUT Å VC, etc. Å VIDEO VIDEO IN VIDEO S-VIDEO AUDIO VIDEO IN DV/DVD IN White ed ı Stereo audio cable (not supplied) Ç Î Composite video cable (not supplied) S-video cable (not supplied) NOTES Select the analogue input mode. See Selecting the analogue or digital input mode on page 12. You can enjoy digital sound if using a digital coaxial or optical cable. When shipped from the factory, the audio input mode for a video component other than DVD recorder and DVD player is set to use the digital optical terminal (DIGITA IN 2 (VIDEO)). For details of digital connection, see page 10. When connecting a video component other than DVD recorder or DVD player to the component video input jacks, select the component video input mode (VIDEO VIDEOIN) correctly. If you do not, you cannot view the playback picture on the TV. See page 20 for details. 7 Connecting a TV to the MONITO OUT jacks COMPONENT VIDEO Y PB Green Blue Component video cable (not supplied) Å To component video output Connect Y, PB, and P correctly. ı To left/right audio channel output Ç To composite video output Î To S-video output Turn off all components before making connections. VIDEO IN DV/DVD IN P MONITO OUT ed Å TV NOTES Select the analogue input mode. See Selecting the analogue or digital input mode on page 12. You can enjoy digital sound if using a digital coaxial or optical cable. For details of digital connection, see page 10. Å To component video input Connect Y, PB, and P correctly. 9

14 AM EXT Digital connection This receiver is equipped with two DIGITA IN terminals one digital coaxial terminal and one digital optical terminal. To reproduce the digital sound, use the digital connection in addition to the analogue connection methods described on pages 7 to 9. Digital coaxial cable (not supplied) Digital optical cable (not supplied) Turn off all components before making connections. When you connect other components, refer also to their manuals. USB Connection This receiver is equipped with a USB terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC. When you connect your PC for the first time, follow the procedure below. emember you cannot send any signal or data to your PC from this receiver. IMPOTANT: Check if your PC equipped with the CD-OM drive is running on Windows 98 SE*, Windows Me*, Windows 2000* or Windows XP* and prepare its CD-OM. How to install the USB drivers The following procedure is described using the English version of Windows XP. If your PC is running on a different version of operation system or language, the screens shown on your PC s monitor will differ from the ones used in the following procedure. 1. Turn on your PC and start running Windows 98 SE, Windows Me, Windows 2000, or Windows XP. If the PC has been turned on, quit all the applications now running. When the component has a digital coaxial output terminal, connect it to the 1(DV/DVD) terminal, using a digital coaxial cable (not supplied). 2. Turn on the receiver, and select the source as USB DIGITA. 3. Set the volume to minimum. IMPOTANT: Always set volume to 0 when connecting or disconnecting the other equipment. DIGITA IN 1(DV/DVD) 2(VIDEO) 4. Connect the unit to the PC using a USB cable (not supplied). When the component has a digital optical output terminal, connect it to the 2(VIDEO) terminal, using a digital optical cable (not supplied). USB Before connecting a digital optical cable, unplug the protective plug. USB cable (not supplied) PC NOTES When shipped from the factory, the DIGITA IN terminals have been set for use with the following components: 1(DV/DVD): For DVD recorder or DVD player 2(VIDEO): For video components other than DVD recorder and DVD player If you connect other components, change the digital input (DIGITA IN) terminal setting correctly. See Setting the digital input (DIGITA IN) terminals DIGITA IN 1/2 on page 20. Select the correct digital input mode. See Selecting the analogue or digital input mode on page 12. Use USB series A plug to B plug cable when connecting. 10

15 5. The USB drivers are installed automatically. If the USB drivers are not installed automatically, install the USB drivers by following the instructions on the PC s monitor. 6. Check if the drivers are correctly installed. 1. Open the Control Panel on your PC: Select [Start] = [Control Panel]. 2. Select [System] = [Hardware] = [Device Manager] = [Sound, video and game controllers] = [Universal Serial Bus controllers]. The following window appears, and you can check whether the drivers are installed. NOTES DO NOT turn off the receiver or disconnect the USB cable while installing the drivers and for several seconds while your PC is recognizing the receiver. When connecting with a USB cable, use the USB 2.0 cable whose length is 1.5 m. If your PC does not recognize the receiver, disconnect the USB cable and connect it again. If it does not work yet, restart Windows. The installed drivers can be recognized only when the USB cable is connected between the receiver and your PC. The sound may not be played back correctly interrupted or degraded due to your PC settings and PC specifications. * Microsoft, Windows 98 SE, Windows Me, Windows 2000, and Windows XP are registered trademarks of Microsoft corporation. Connecting the power cord When all the audio/video connections have been made, connect the AC power plug to the wall outlet. Make sure that the plugs are inserted firmly. The standby lamp lights in red. CAUTIONS: Do not touch the power cord with wet hands. Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other accidents. If the cord is damaged, consult a dealer and have the power cord replaced with a new one. Now PC is ready for playback through the USB connection. After installation is completed, you can use your PC as the playback source. The PC automatically recognizes the receiver whenever a USB cable is connected between the PC and the receiver while the receiver is turned on. When not using the PC as the playback source, disconnect the USB cable. To play back sounds on the PC, refer to the manuals supplied with the sound reproduction application installed in the PC. NOTES Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference. The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases: When you unplug the power cord. When a power failure occurs. When you unplug the power cord with the receiver on and connect the power cord again, the receiver enters standby mode. If no sound comes from the speakers, check the following items: - select the source as USB DIGITA. - connect the USB cable correctly. - check the USB device is recognized properly. - check the playback software in your PC is compatible with the USB device. - open the Control Panel on your PC, select [Sounds and Audio Devices] = [Audio] tab = [Sound playback] = [Default device], and check [Default device] is set to [USB Audio device]. 11

16 Basic operations 2 Select the source to play On the front panel: Turn SOUCE SEECTO until the source name you want appears on the display. The source lamp corresponding to the selected source lights in red. As you turn SOUCE SEECTO, the source changes as follows: AUTO SU TUNED STEEO AUTO MUTING S.WF MHz Source lamps DV/DVD (DGT) VC (DIGITA) VIDEO (DIGITA) TV (DIGITA) USB DIGITA FM AM (Back to the beginning) DV/DVD (DGT)* : VC (DIGITA)*: VIDEO (DIGITA)* : TV (DIGITA)* : USB DIGITA: FM: AM: Select the DVD recorder or DVD player. Select the VC. Select the component connected to the VIDEO IN jacks on the rear of the receiver. Select the TV. Select the PC component. Select an FM broadcast. Select an AM (MW) broadcast. 2 3 From the remote control: Press one of the source selecting buttons. For the tuner, press FM/AM. Each time you press FM/AM, the band alternates between FM and AM (MW). 1 Turn on the power Press STANDBY/ON (or STANDBY/ON AUDIO on the remote control). The standby lamp goes off and the source lamp of the current source lights in red. Current source name appears. S.WF AUTO SU TUNED STEEO AUTO MUTING MHz * Selecting the analogue or digital input mode You need to select the proper input mode according to the connection method (analogue or digital) on pages 7 to 10. In case of digital connection, you also need to select the correct digital input terminal. (See Setting the digital input (DIGITA IN) terminals DIGITA IN 1/2 on page 20.) DGT AUTO and UE setting are memorized for each source. From the remote control ONY: Press /DIGITA to select the analogue or digital input mode. Each time you press the button, the input mode changes as follows: DIGITA AUTO DIGITA C S.WF FE S S AUTO SU To turn off the power (into standby) Press STANDBY/ON (or STANDBY/ON AUDIO on the remote control) again. The standby lamp lights in red. DGT AUTO DOBY DIGITA DTS UE (Back to the beginning) NOTE A small amount of power is consumed in standby mode. To turn the power off completely, unplug the AC power cord. 12

17 DGT AUTO (DIGITA AUTO): Select for the digital input mode. The receiver automatically detects the incoming signal format, then the digital signal format indicator (INEA PCM,,, or 96/24) for the detected signal lights up. DOBY DIGITA*: DTS*: UE: Initial setting: DGT AUTO Select to play back software encoded with Dolby Digital. Select to play back software encoded with DTS. Select for the analogue input mode. The indicator lights up on the display. * If the following symptoms occur while playing Dolby Digital or DTS software with DGT AUTO selected, select DOBY DIGITA or DTS. Sound does not come out at the beginning of playback. Noise comes out while searching for or skipping chapters or tracks. Ex.: When Dolby Digital is selected DIGITA AUTO DIGITA C S.WF FE S S AUTO SU NOTES You cannot select the digital input mode when selecting FM or AM as the source. The input mode is fixed to DGT AUTO when selecting USB DIGITA as the source. When you turn off the power or select another source, DOBY DIGITA or DTS is canceled and the digital mode is automatically reset to DGT AUTO. The following digital signal format indicators on the display indicate what type of signal comes into the receiver. INEA PCM: ights up when inear PCM signal comes in. : ights up when Dolby Digital signal comes in. Flashes when DOBY DIGITA is selected for any software other than Dolby Digital. : ights up when conventional DTS signal comes in. Flashes when DTS is selected for any software other than DTS. 3 Adjust the volume To increase the volume, turn MASTE VOUME control clockwise (or press VOUME + on the remote control). To decrease the volume, turn MASTE VOUME control counterclockwise (or press VOUME on the remote control). When you adjust the volume, the volume level indication appears on the display for a while. S.WF AUTO SU CAUTION: Always set the volume to the minimum before starting any sources. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers. NOTE The volume level can be adjusted within the range of 0 (minimum) to 50 (maximum). istening with headphones You can enjoy not only stereo software but also multi-channel software through the headphones. (Sounds are down-mixed to the front channels while playing multi-channel software.) Connect a pair of headphones to the PHONES jack on the front panel to activate the HEADPHONE mode. The HEADPHONE indicator lights up on the display. You can also enjoy the Surround/DSP mode through the headphones 3D HEADPHONE mode. For details, see page 28. Disconnecting a pair of headphones from the PHONES jack cancels the HEADPHONE (or 3D HEADPHONE) mode and activates the speakers. CAUTION: Be sure to turn down the volume: Before connecting or putting on headphones, as high volume can damage both the headphones and your hearing. Before removing headphones, as high volume may output from the speakers. 96/24: ights up when DTS 96/24 signal comes in. NOTE When DGT AUTO cannot recognize the incoming signal, no digital signal format indicator lights up on the display. 13

18 Turning off the sounds temporarily From the remote control ONY: Press MUTING to turn off the sound through all connected speakers and headphones. MUTING appears on the display and the volume turns off. S.WF AUTO SU To restore the sound, press MUTING again. Pressing VOUME +/ (or turning MASTE VOUME control on the front panel) also restores the sound. Changing the display brightness You can dim the display Dimmer. Press DIMME repeatedly. Each time you press the button, the display brightness changes as follows: DIMME 1: Dims the display. DIMME 2: Dims the display more than DIMME 1. DIMME 3: Turns off the display. (Temporarily canceled when you operate the receiver.) DIMME OFF: Cancels the Dimmer (normal display). Turning off the power with the Sleep Timer You can fall asleep while listening to music Sleep Timer. From the remote control ONY: Press SEEP repeatedly. Each time you press the button, the shut-off time changes in 10 minute intervals. The SEEP indicator lights up on the display. SEEP indicator S.WF AUTO SU 10min 20min 30min 40min 50min 60min OFF (canceled) 90min 80min 70min SEEP Basic adjustment of auto memory This receiver memorizes sound settings for each source: when you turn off the power, and when you change the source. When you change the source, the memorized settings for the newly selected source are automatically recalled. The following can be stored for each source: Analogue/digital input mode (see page 12) Bass boost (see page 23) Digital equalization pattern (see page 22) Input attenuator mode (see page 23) Midnight mode (see page 19) Speaker output level (see page 22) Surround/DSP mode selection (see page 34) NOTE If the source is FM or AM (MW), you can assign a different setting for each band. Signal and speaker indicators on the display Signal indicators C S.WF FE S S S SB SB SB DUA MONO AUTO SU DIGITA AUTO C HEADPHONE INEA PCM S.WF FE P x DIGITA NEO : 6 DSP S S S 96 / 24 3D-PHONIC SB SB SB VITUA SB Speaker indicators C S.WF FE S S S SB SB SB The signal indicators light up as follows: : When digital input is selected: ights up when the left channel signal comes in. When analogue input is selected: Always lights up. : When digital input is selected: ights up when the right channel signal comes in. When analogue input is selected: Always lights up. C: ights up when the center channel signal comes in. S: ights up when the left surround channel signal comes in. S: ights up when the right surround channel signal comes in. S: ights up when monaural surround signal comes in. SB: ights up when the surround back channel signal comes in. FE: ights up when the FE channel signal comes in. The speaker indicators light up as follows: The subwoofer indicator ( S.WF ) lights up when SUBWOOFE is set to SUBWF <YES>. For details, see page 17. The other speaker indicators light up only when the corresponding speaker is set to SM (small) or G (large), and also when required for the current playback. When the shut-off time comes: The receiver turns off automatically. To check or change the remaining time until the shut-off time: Press SEEP once. The remaining time (in minutes) until the shut-off time appears. To change the shut-off time, press SEEP repeatedly. To cancel the Sleep Timer: Press SEEP repeatedly so that SEEP OFF appears on the display. (The SEEP indicator goes off.) The Sleep Timer is also canceled when you turn off the receiver. 14

19 Basic settings 3 Turn MUTI JOG to select an appropriate number of the connected speakers (speaker channel number). As you turn the jog, the speaker channel number changes as follows. For the details of speaker channel number, see Speakers (channels) number and the size on page 16. S.WF To obtain the best possible sound effect from Surround/DSP modes (see pages 31 to 35), you need to set up the speaker and subwoofer information after all the connections are completed. From pages 15 to 20, how to set speakers and other basic items of the receiver are explained. Setting the speaker information easily Quick Speaker Setup Quick Speaker Setup helps you to easily and quickly register the speaker size, speaker distance, and output level of each speaker according to your listening room to create the best possible surround effect. You can also register each speaker s information manually. For details, see page 18. 1,7 2,4,6 1,3,5 2.0ch 2.1ch 3.0ch 4.0ch 6.0ch 4.1ch 6.1ch 5.0ch 7.0ch* (Back to the beginning) * 7.0ch is the initial setting. 4 Press SET. S.WF 3.1ch 5.1ch 7.1ch 5 Turn MUTI JOG to select an appropriate room size to match to your listening room. As you turn the jog, the room size changes as follows. To select your appropriate room size, see oom size and the speaker distance/output level on page 16. S.WF Before you start, remember... There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. S M * (Back to the beginning) 1 Press SETTING and turn MUTI JOG until QUICK SPK SET appears on the display. S.WF 2 Press SET. * is the initial setting. 6 Press SET. QUICK SPEAKE SETUP is now completed, then the display goes back to SETTING menu. 7 Press SETTING. S.WF NOTES This procedure will not be completed if you stop in the middle of the setting process. Once Quick Speaker Setup is performed, the speaker output levels are also set to appropriate values automatically (common to all sources). If you want to set the speaker output levels separately for each source, see Adjusting the speaker output levels on page 22. CONTINUED ON THE NEXT PAGE 15

20 Speakers (channels) number and the size You can find how each of the speaker size is defined according to the number of connected speakers (speaker channel ch number) you select. Subwoofer is counted as 0.1 channel. The size of connected speakers CH / C S/S SB SUBWF 2.0CH AGE NONE NONE NONE NO 2.1CH SMA NONE NONE NONE YES 3.0CH AGE SMA NONE NONE NO 3.1CH SMA SMA NONE NONE YES 4.0CH AGE NONE SMA NONE NO 4.1CH SMA NONE SMA NONE YES 5.0CH AGE SMA SMA NONE NO 5.1CH SMA SMA SMA NONE YES SMA 6.0CH AGE SMA SMA (1SPK) NO SMA 6.1CH SMA SMA SMA (1SPK) YES SMA 7.0CH AGE SMA SMA (2SPK) NO SMA 7.1CH SMA SMA SMA (2SPK) YES oom size and the speaker distance/output level According to the selected room size, speaker distance and speaker output level for each activated speaker is set as follows: oom size Speaker Distance Output level / 3.0 m (10 ft) 0 db (arge) C 3.0 m (10 ft) 0 db S/S 3.0 m (10 ft) 0 db SB(SB)/SB 3.0 m (10 ft) 0 db M / 2.7 m (9 ft) 0 db (Medium) C 2.4 m (8 ft) 2 db S/S 2.1 m (7 ft) 3 db SB(SB)/SB 1.8 m (6 ft) 4 db S / 2.4 m (8 ft) 0 db (Small) C 2.1 m (7 ft) 2 db S/S 1.5 m (5 ft) 4 db SB(SB)/SB 1.2 m (4 ft) 6 db NOTE Abbreviations used in the tables above stand for the following speakers and the subwoofer: - : eft front speaker - : ight front speaker - C: Center speaker - S: eft surround speaker - S: ight surround speaker - SB: Surround back speaker - SB: eft surround back speaker - SB: ight surround back speaker - SUBWF: Subwoofer Basic setting items You can adjust the following items. See pages in parentheses for details. You cannot select the items which is not available with the current setting. For example, when the speaker channel number is set to <5.1ch> in Quick Speaker Setup, you cannot select the following items: S BACK OUT, S BACK DIST, S BACK DIST, S BACK DIST Items QUICK SPK SET To do egister the number of speakers you connect and the size of your listening room. (15) SUBWOOFE* egister your subwoofer. (17) FONT SPK* egister your front speaker size. (17) CENTE SPK* egister your center speaker size. (17) SUOUND SPK* egister your surround speaker size. (17) S BACK SPK* S BACK OUT* DIST UNIT FONT DIST* FONT DIST* CENTE DIST* SU DIST* SU DIST* S BACK DIST* S BACK DIST* S BACK DIST* EX/ES/PIIx egister your surround back speaker size. (17) egister the number of your surround back speaker(s). (17) Select the measuring unit for the speaker distance. (18) egister the distance from the left front speaker to your listening point. (18) egister the distance from the right front speaker to your listening point. (18) egister the distance from the center speaker to your listening point. (18) egister the distance from the left surround speaker to your listening point. (18) egister the distance from the right surround speaker to your listening point. (18) egister the distance from the surround back speaker to your listening point. (18) egister the distance from the left surround back speaker to your listening point. (18) egister the distance from the right surround back speaker to your listening point. (18) Select the EX/ES/PIIx reproduction mode. (18) DUA MONO Select the Dual Mono sound channel. (19) SUBWOOFE OUT COSSOVE Select sounds emitted from the subwoofer. (19) Select the cutoff frequency to the subwoofer. (19) FE ATT Attenuate the bass (FE) sounds. (19) MIDNIGHT MODE eproduce a powerful sound at night. (19) DIGITA IN 1 DIGITA IN 2 Select the component connected to the digital coaxial terminal 1(DV/DVD). (20) Select the component connected to the digital optical terminal 2(VIDEO). (20) AUTO MODE Select Auto Function mode. (20) DVD VIDEO IN VIDEO VIDEOIN Select the type of video terminal used for the DVD recorder or DVD player. (20) Select the type of video terminal used for the component connected to the VIDEO IN jacks on the rear of the receiver. (20) * If you have used Quick Speaker Setup on page 15, these settings are not required. 16

21 Operating procedure On the front panel ONY: Before you start, remember... There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. Ex.: When setting DIGITA IN 1 terminal. 1 Press SETTING. MUTI JOG now works for the setting operation. 2 Turn MUTI JOG until the item you want to set appears on the display. As you turn MUTI JOG, the setting items change as follows: 3 Press SET. The current setting of the selected item appears. 4 Turn MUTI JOG to select the appropriate setting. Your setting is stored. 5 Press SET. 1,7 3,5 2,4 S.WF S.WF S.WF QUICK SPK SET SUBWOOFE FONT SPK CENTE SPK SUOUND SPK S BACK SPK S BACK OUT DIST UNIT FONT DIST FONT DIST CENTE DIST SU DIST SU DIST S BACK DIST S BACK DIST S BACK DIST EX/ES/PIIx SUBWOOFE OUT DUA MONO COSSOVE FE ATT MIDNIGHT MODE DIGITA IN 1 DIGITA IN 2 AUTO MODE DVD VIDEO IN VIDEO VIDEOIN (Back to the beginning) DV/DVD TV VIDEO VC 6 epeat steps 2 to 5 to set other items if necessary. Setting the speakers To obtain the best possible surround effect from the Surround and DSP modes, register the setting about the speaker after all connections are completed. If you have used Quick Speaker Setup on page 15, this setting is not required. Setting subwoofer information SUBWOOFE Select whether you have connected a subwoofer or not. SUBWF <YES> Select when you have connected a subwoofer. The subwoofer indicator ( S.WF ) lights up on the display. You can adjust the subwoofer output level (see page 22). SUBWF <NO> Select when you have disconnected a subwoofer. Selecting this changes the front speaker size to G (see below). Initial setting: SUBWF <NO> Setting the speaker size FONT SPK (front speakers), CENTE SPK (center speaker), SUOUND SPK (surround speakers), S BACK SPK (surround back speakers) egister the sizes of all the connected speakers. <G> (large) <SM> (small) <NO> Select when the cone speaker size is larger than 12 cm. Select when the cone speaker size is smaller than 12 cm. Select when you have disconnected a speaker. (Not selectable for the front speakers.) Initial setting: <G> (for the front speakers) <SM> (for other speakers) Setting the surround back speaker(s) S BACK OUT egister the number of the surround back speaker(s). SB OUT <1SPK> Select when you use 1 surround back speaker. SB OUT <2SPK> Select when you use 2 surround back speakers. Initial setting: SB OUT <2SPK> NOTES If you have selected SM (small) for the front speaker size, you cannot select G (large) for other speakers. When SUBWOOFE is set to SUBWF <NO>, the front speaker size is fixed to G (and you cannot select SM ). When SUOUND SPK is set to SM (small), you cannot select G (large) for the surround back speaker. When SUOUND SPK is set to NO, the surround back speaker is fixed to NO. When S BACK SPK is set to NO, you cannot select S BACK OUT. When SB OUT is set to <1SPK>, connect the surround back speaker to the left surround back speaker terminal (see page 6). No sound comes from the surround back speaker if you connect it to the right surround back speaker terminal. 7 Press SETTING. The source indication resumes on the display. 17

22 Setting the speaker distance The distance from your listening point to the speakers is one of the important elements to obtain the best possible sound effect from the Surround/DSP modes. By referring to the speaker distance, the receiver automatically sets the delay time of the sound through each speaker so that sounds through all the speakers can reach you at the same time. 7 Measuring unit DIST UNIT Select which measuring unit you use. UNIT <meter> Select to set the distance in meters. UNIT <feet> Select to set the distance in feet. Initial setting: UNIT <meter> 7 Speaker distance FONT DIST (for the left front speaker), FONT DIST (for the right front speaker), CENTE DIST (for the center speaker), SU DIST (for the left surround speaker), SU DIST (for the right surround speaker), S BACK DIST (for the left surround back speaker), S BACK DIST (for the right surround back speaker) Adjustable range: 0.3 m to 9.0 m in 0.3 m intervals (1 ft to 30 ft in 1 ft intervals) Initial setting: 3.0 m (10 ft) for all speakers S C 2.1 m (7 ft) 2.4 m (8 ft) 3.3 m (11 ft) 3.0 m (10 ft) 2.7 m (9 ft) S Activating the EX/ES/PIIx setting EX/ES/PIIx Depending on this setting, available Surround modes for digital multi-channel software vary EX/ES/PIIx (7.1-channel) reproduction or 5.1-channel reproduction. Select an appropriate setting for your enjoyment. For details about relation between EX/ES/PIIx setting and available Surround mode, see page 34. To activate the Surround mode, see page 35. <AUTO> <ON> According to the incoming signal, an appropriate Surround mode is applied. For Dolby Digital Surround EX and DTS-ES software, 6.1-channel reproduction is applied*. For other multi-channel (more than 4 channel) encoded software, 5.1-channel reproduction is applied. Select to apply 6.1-channel reproduction to both 5.1-channel and 6.1-channel encoded software. <PIIx MOVIE> Select to apply PIIx MOVIE (7.1-channel) reproduction to both 5.1-channel and 6.1- channel encoded software. <PIIx MUSIC> Select to apply PIIx MUSIC (7.1-channel) reproduction to both 5.1-channel and 6.1- channel encoded software. <OFF> Select to cancel the EX/ES/PIIx (7.1-channel) reproduction. Initial setting: <AUTO> * For some Dolby Digital Surround EX software, Dolby Digital 5.1- channel reproduction ( DOBY DIGITA ) may be applied even though you have selected <AUTO>. In this case, select <ON> to apply DOBY D EX. From the remote control: Press EX/ES/PIIx repeatedly to select either one of the above SB SB In this case, set the distance as follows: eft front speaker (): FONT <3.0m> (10ft) ight front speaker (): FONT <3.0m> (10ft) Center speaker (C): CENTE <3.0m> (10ft) eft surround speaker (S): SU <2.7m> (9ft) ight surround speaker (S): SU <2.7m> (9ft) eft surround back speaker (SB) : SBACK <2.4m> (8ft) ight surround back speaker (SB) : SBACK <2.4m> (8ft) NOTES You cannot set the speaker distance for the speakers you have set to NO. If you have selected <1SPK> for S BACK OUT (see page 17), S BACK DIST appears instead of S BACK DIST and S BACK DIST. NOTES When SUOUND SPK is set to NO (see page 17), this function is not available. When S BACK SPK is set to NO (see page 17), the Virtual Surround Back (see page 34) is applied for EX/ES/PIIx (6.1- channel) reproduction. 18

AUDIO/VIDEO CONTROL RECEIVER RX-D301S / RX-D302B INSTRUCTIONS LVT B [B]

AUDIO/VIDEO CONTROL RECEIVER RX-D301S / RX-D302B INSTRUCTIONS LVT B [B] AUDIO/VIDEO CONTO ECEIVE X-D301S / X-D302B INSTUCTIONS VT1321-008B [B] Warnings, Cautions and Others IMPOTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable

More information

RX-ES9SL INSTRUCTIONS HOME CINEMA CONTROL CENTER LVT A [B]

RX-ES9SL INSTRUCTIONS HOME CINEMA CONTROL CENTER LVT A [B] HOME CINEMA CONTO CENTE X-ES9S INSTUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. etain this information for future

More information

RX-E111RSL / RX-E112RSL

RX-E111RSL / RX-E112RSL VCR /REW TV/VIDEO SLEEP DIMMER RM-SRXE111R REMOTE HOME CINEMA CENTER TV DIRECT STB VCR TV ANALOG/DIGITAL TAPE FM INPUT ON/OFF PTY( MODE STB RETURN PTY SEARCH ENTER VCR FM MODE TA/NEWS/INFO AUDIO CENTER

More information

RX-6000VBK / RX-6008VBK

RX-6000VBK / RX-6008VBK MENU ENTER STANDBY SOURCE NAME SOURCE NAME THEATER LIVE CLUB DANCE CLUB HALL PAVILLION ON DIGITAL AUTO D I G I T A L ADJUST SETTING MEMORY AUDIO/VIDEO CONTROL RECEIVER RX-6000VBK / RX-6008VBK SLEEP POWER

More information

AUDIO/VIDEO CONTROL RECEIVER RX-D701S INSTRUCTIONS LVT A [A]

AUDIO/VIDEO CONTROL RECEIVER RX-D701S INSTRUCTIONS LVT A [A] AUDIO/VIDEO CONTROL RECEIVER RX-D701S INSTRUCTIONS LVT1437-012A [A] Warnings, Cautions, and Others Caution STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON

More information

MULTI CHANNEL AV RECEIVERSTR-DH750/STR- DH550

MULTI CHANNEL AV RECEIVERSTR-DH750/STR- DH550 MULTI CHANNEL AV RECEIVERSTR-DH750/STR- DH550 PROTECTOR The receiver will automatically turn off after a few seconds. Check the followings: There may be an electrical surge or power failure. Unplug the

More information

FD Trinitron Colour Television

FD Trinitron Colour Television R 4-205-569-32(1) FD Trinitron Television Instruction Manual GB KV-14LM1U 2000 by Sony Corporation NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment

More information

YHT-31 QUICK-CONNECT GUIDE

YHT-31 QUICK-CONNECT GUIDE 1ST DAFT YHT-31 QUICK-CONNECT GUIDE INTODUCTION Yamaha developed the YHT-31 A/V Home Theater package to turn your home into a theater. In addition to enhancing the sound of a video source, like your TV

More information

YHT-800 QUICK-CONNECT GUIDE

YHT-800 QUICK-CONNECT GUIDE YHT-800 QUICK-CONNECT GUIDE INTODUCTION Yamaha developed the YHT-800 A/V Home Theater package to turn your home into a theater. In addition to enhancing the sound of a video source, like your,, or VC,

More information

YHT-700 QUICK-CONNECT GUIDE

YHT-700 QUICK-CONNECT GUIDE YHT-700 QUICK-CONNECT GUIDE INTODUCTION Yamaha developed the YHT-700 A/V Home Theater package to turn your home into a theater. In addition to enhancing the sound of a video source, like your,, or VC,

More information

YHT-34 QUICK-CONNECT GUIDE

YHT-34 QUICK-CONNECT GUIDE 1ST DAFT YHT-34 QUICK-CONNECT GUIDE INTODUCTION Yamaha developed the YHT-34 A/V Home Theater package to turn your home into a theater. In addition to enhancing the sound of a video source, like your TV,,

More information

YHT-24 QUICK-CONNECT GUIDE

YHT-24 QUICK-CONNECT GUIDE 1ST DAFT YHT-24 QUICK-CONNECT GUIDE INTODUCTION Yamaha developed the YHT-24 A/V Home Theater package to turn your home into a theater. In addition to enhancing the sound of a video source, like your TV

More information

INSTRUCTIONS FOR USE Pro-Ject Receiver Box S

INSTRUCTIONS FOR USE Pro-Ject Receiver Box S INSTRUCTIONS FOR USE Pro-Ject Receiver Box S Dear music lover, thank you for purchasing a PRO-JECT AUDIO receiver. In order to achieve maximum performance and reliability you should study these instructions

More information

DV900VHS01. Hookup Pages. Digital Video Disc Player & Video Cassette Recorder

DV900VHS01. Hookup Pages. Digital Video Disc Player & Video Cassette Recorder Digital Video Disc Player & Video Cassette ecorder DV900VHS0 Hookup Pages Important! eturn your Warranty egistration Card within 0 days. See why inside. 75Ω CABE Cr 8 Hookups Without a Cable Box/Direct

More information

Acer LCD TV AT2001 User's Guide

Acer LCD TV AT2001 User's Guide Acer LCD TV AT2001 User's Guide Copyright 2005. Acer Incorporated. All Rights Reserved. Acer AT2001 User' s Guide Original Issue: May 2005 Acer and the Acer logo are registered trademarks of Acer Incorporated.

More information

YHT-33 QUICK-CONNECT GUIDE

YHT-33 QUICK-CONNECT GUIDE YHT-33 QUICK-CONNECT GUIDE INTODUCTION Yamaha developed the YHT-33 A/V Home Theater package to turn your home into a theater. In addition to enhancing the sound of a video source, like your TV, DVD, or

More information

Quick Reference Guide

Quick Reference Guide Multimedia Projector Quick Reference Guide MODEL 103-011100-01 Projection lens is optional. English Use this book as a reference guide when setting up the projector. For detailed information about installation,

More information

RX-V596RDS. Natural Sound AV Receiver Ampli-tuner audio-vidéo

RX-V596RDS. Natural Sound AV Receiver Ampli-tuner audio-vidéo G B RX-V596RDS Natural Sound AV Receiver Ampli-tuner audio-vidéo OWNER S MANUAL MODE D EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING CAUTION:

More information

FM Stereo FM/AM Receiver

FM Stereo FM/AM Receiver 4-255-361-11(1) FM Stereo FM/AM eceiver Operating Instructions Owner s ecord The model and serial numbers are located on the rear of the unit. ecord the serial number in the space provided below. efer

More information

FM Stereo FM/AM Receiver

FM Stereo FM/AM Receiver 2-580-804-11(1) FM Stereo FM/AM eceiver Operating Instructions Owner s ecord The model and serial numbers are located on the rear of the unit. ecord the serial number in the space provided below. efer

More information

Q-TV2. User Manual. for Screens

Q-TV2. User Manual. for Screens Q-TV2 User Manual for 30-42 Screens Contents Introduction 02 Safety Guidelines 03 Getting started 03 Potential Uses 04 Carton Contents 05 Q-TV2 Controls 05 Remote Fixings 06 Fixing Rails 07 Fitting Q-TV2

More information

just add your TV and video source YHT-18 1ST DRAFT QUICK-CONNECT GUIDE

just add your TV and video source YHT-18 1ST DRAFT QUICK-CONNECT GUIDE just add your TV and video source 1ST DAFT YHT-18 QUICK-CONNECT GUIDE INTODUCTION Yamaha developed the YHT-18 A/V Home Theater package to turn your home into a theater. In addition to enhancing the sound

More information

Stereo Cassette Deck

Stereo Cassette Deck 3-864-773-11(1) Stereo Cassette Deck Operating Instructions TC-SD1 1998 by Sony Corporation WARNING WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical

More information

HTR-5450RDS Natural Sound AV Receiver Ampli-tuner audio-vidéo

HTR-5450RDS Natural Sound AV Receiver Ampli-tuner audio-vidéo G B HT-5450DS Natural Sound AV eceiver Ampli-tuner audio-vidéo OWNE S MANUAL MODE D EMPLOI BEDIENUNGSANLEITUNG BUKSANVISNING MANUALE DI ISTUZIONI MANUAL DE INSTUCCIONES GEBUIKSAANWIJZING CAUTION: EAD THIS

More information

DVD621. Digital Video Disc Player Hookup Pages

DVD621. Digital Video Disc Player Hookup Pages DVD62 Digital Video Disc Player Hookup Pages in /MONO 8 Hookups ou may connect the several different ways, depending on your existing equipment and your preferences for sound and picture quality. To determine

More information

FV400 DIGITAL TV RECEIVER WITH MODULATOR INSTRUCTION MANUAL

FV400 DIGITAL TV RECEIVER WITH MODULATOR INSTRUCTION MANUAL FV400 DIGITAL TV RECEIVER WITH MODULATOR INSTRUCTION MANUAL Please read this instruction manual carefully before using your receiver Table of Contents Introduction-----------------------------------------------------------------------------

More information

YHT-17 QUICK-CONNECT GUIDE

YHT-17 QUICK-CONNECT GUIDE YHT-17 QUICK-CONNECT GUIDE YHT-17QUICK-CONNECT GUIDE INTODUCTION Yamaha developed the YHT-17 A/V Home Theater package to turn your home into a theater. In addition to enhancing the sound of a video source,

More information

Be sure to run the vehicle engine while using this unit to avoid battery exhaustion.

Be sure to run the vehicle engine while using this unit to avoid battery exhaustion. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNE; Please Read all of these instructions regarding

More information

Stereo Cassette Deck

Stereo Cassette Deck 3-858-050-11(1) Stereo Cassette Deck Operating Instructions 199 by Sony Corporation 3-858-050-11 (1) WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical

More information

DSP-E800 AV PROCESSOR/AMPLIFIER AMPLIFICATEUR D EFFETS AUDIO-VIDEO

DSP-E800 AV PROCESSOR/AMPLIFIER AMPLIFICATEUR D EFFETS AUDIO-VIDEO BG DSP-E00 AV POCESSO/AMPIFIE AMPIFICATEU D EFFETS AUDIO-VIDEO OWNE S MANUA MODE D EMPOI BEDIENUNGSANEITUNG BUKSANVISNING MANUAE DI ISTUZIONI MANUA DE INSTUCCIONES GEBUIKSAANWIJZING CAUTION: EAD THIS BEFOE

More information

Quick Use and Hookup Guide

Quick Use and Hookup Guide Quick Use and Hookup Guide English CONTENTS STAG CD ON THE WA.. UNFOD THE BASE............... CHANNE STAATION........ PESENTATION OF THE CD..... ACCESSOIES.................... BATTEY STAATION............

More information

Before you can install your LCD TV on the wall, you must fi rst remove the base using the steps below:

Before you can install your LCD TV on the wall, you must fi rst remove the base using the steps below: Quick Start Guide English CONTENTS INSTALLING LCD TV ON THE WALL.. TV CHANNEL INSTALLATION........ PRESENTATION OF THE LCD TV...... ACCESSORIES.................... BATTERY INSTALLATION............ REMOTE

More information

2.0 Wall Mount TV Soundbar Instruction Manual

2.0 Wall Mount TV Soundbar Instruction Manual 8010275 2.0 Wall Mount TV Soundbar Instruction Manual Read all of the instructions before using this soundbar and keep the manual in a safe place for future reference. Safety Information CA UT IO N RISK

More information

User Manual. High Definition Digital Set Top Box HDSTB250

User Manual. High Definition Digital Set Top Box HDSTB250 User Manual High Definition Digital Set Top Box HDSTB250 CHANNEL HDSTB250 Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference. Important

More information

About the supplied remote control

About the supplied remote control AUDIO VIDEO SUOUND ECEIVE KF-X9090D INSTUCTION MANUA About the supplied remote control Compared to standard remote controls, the remote control supplied with this model has several operation modes. These

More information

Owner s Manual. TFT-LCD TV High Brightness & Contrast NICAM/A2 Stereo Sound MODEL: L15SV6-A0, L17LV6-A1,L20AV6-A0 L17L6A-G1,L20L6A

Owner s Manual. TFT-LCD TV High Brightness & Contrast NICAM/A2 Stereo Sound MODEL: L15SV6-A0, L17LV6-A1,L20AV6-A0 L17L6A-G1,L20L6A TFT-LCD COLOUR TV Owner s Manual TFT-LCD TV High Brightness & Contrast NICAM/A2 Stereo Sound Please read this manual carefully before using your television and keep this manual in a good place for future

More information

DSP-AX620 Natural Sound AV Amplifier Amplificateur audio-vidéo

DSP-AX620 Natural Sound AV Amplifier Amplificateur audio-vidéo G B DSP-AX620 Natural Sound AV Amplifier Amplificateur audio-vidéo OWNE S MANUA MODE D EMPOI BEDIENUNGSANEITUNG BUKSANVISNING MANUAE DI ISTUZIONI MANUA DE INSTUCCIONES GEBUIKSAANWIJZING CAUTION: EAD THIS

More information

YHT-23 QUICK-CONNECT GUIDE

YHT-23 QUICK-CONNECT GUIDE YHT-23 QUICK-CONNECT GUIDE YHT-23 QUICK-CONNECT GUIDE INTODUCTION Yamaha developed the YHT-23 A/V Home Theater package to turn your home into a theater. In addition to enhancing the sound of a video source,

More information

AV Control Receiver SA-XR25. Table of contents. Operating Instructions. Step 1. Step 2. Step 3. Step 4. Model No. SA-XR45

AV Control Receiver SA-XR25. Table of contents. Operating Instructions. Step 1. Step 2. Step 3. Step 4. Model No. SA-XR45 ECEIVE ECEIVE AV SYSTEM 2CH / 6CH TUNE/ TAPE CD VC ECEIVE DIECT TUNG DISC PUT MODE SEEP STEEO/ 2CH MIX -TEST SETUP / CH VOUME SKIP SOW / SEACH u i t y VO + TOP MENU DIECT NAVIGATO g > h +/ TONE/ BAANCE

More information

DIGITAL SET TOP BOX STB 7017 INSTRUCTION MANUAL

DIGITAL SET TOP BOX STB 7017 INSTRUCTION MANUAL DIGITAL SET TOP BOX STB7017 INSTRUCTION MANUAL STB 7017 CHANNEL After Sales Support Now you have purchased a Tevion product you can rest assured in the knowledge that as well as your 3 year parts and labour

More information

User Manual High Definition Digital Set Top Box DVBT9070 Please read this User Manual carefully to ensure proper use of this product and keep this man

User Manual High Definition Digital Set Top Box DVBT9070 Please read this User Manual carefully to ensure proper use of this product and keep this man User Manual High Definition Digital Set Top Box DVBT9070 Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference. Important Safety Instructions

More information

RX-D411S/RX-D412B INSTRUCTIONS AUDIO/VIDEO CONTROL RECEIVER LVT A [J]

RX-D411S/RX-D412B INSTRUCTIONS AUDIO/VIDEO CONTROL RECEIVER LVT A [J] AUDIO/VIDEO CONTROL RECEIVER RX-D411S/RX-D412B INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information

More information

Evolution Digital HD Set-Top Box Important Safety Instructions

Evolution Digital HD Set-Top Box Important Safety Instructions Evolution Digital HD Set-Top Box Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near

More information

KRF-V6050D KRF-V5050D

KRF-V6050D KRF-V5050D AUDIO VIDEO SUOUND ECEIVE KF-V6050D KF-V5050D INSTUCTION MANUAL KENWOOD COPOATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may

More information

UNFOLD THE BASE. Quick Start Guide CONTENTS INSTALLING LCD TV ON THE WALL

UNFOLD THE BASE. Quick Start Guide CONTENTS INSTALLING LCD TV ON THE WALL Quick Start Guide English CONTENTS INSTALLING LCD TV ON THE WALL.. UNFOLD THE BASE............... TV CHANNEL INSTALLATION........ PRESENTATION OF THE LCD TV..... ACCESSORIES.................... BATTERY

More information

Introduction. Table of Contents

Introduction. Table of Contents Introduction Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. We hope

More information

OWNER'S MANUAL MODEL: DTV-2000 STANDBY/ON

OWNER'S MANUAL MODEL: DTV-2000 STANDBY/ON OWNER'S MANUAL MODEL: DTV-2000 STANDBY/ON CH+ CH- TABLE OF CONTENTS SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS and FEATURES ACCESSORIES and LOADING BATTERIES REMOTE CONTROL UNIT FRONT PANEL and REAR

More information

User Guide. Connecting the Explorer 1850 Digital Home Communications Terminal

User Guide. Connecting the Explorer 1850 Digital Home Communications Terminal User Guide Connecting the Explorer 1850 Digital Home Communications Terminal Notice for CATV Installers Notice for CATV Installers: If you are a CATV installer, read the information in the box below. 2

More information

DSP-AZ1 OWNER S MANUAL MODE D EMPLOI BEDIENUNGSANLEITUNG. AV Amplifier Amplificateur Audio-Video VOLUME INPUT SELECTOR INPUT MODE 6CH SPEAKERS PROGRAM

DSP-AZ1 OWNER S MANUAL MODE D EMPLOI BEDIENUNGSANLEITUNG. AV Amplifier Amplificateur Audio-Video VOLUME INPUT SELECTOR INPUT MODE 6CH SPEAKERS PROGRAM STANDBY /ON PUT MODE PUT SEECTO SPEAKES A B SET MENU NEXT BASS SIENT PHONES TEBE S VIDEO STEEO EFFECT POCESSO BASS DIECT EXTENSION ON OFF VIDEO VIDEO AUX POGAM BAANCE AUDIO OPTICA EC /ZONE SOUCE/EMOTE

More information

Remote Control. degraded, causing unreliable operation. The recommended effective distance for remote operation is about 16 feet (5 meters).

Remote Control. degraded, causing unreliable operation. The recommended effective distance for remote operation is about 16 feet (5 meters). Media Streaming Sound Bar RTS736W User Manual Remote Control using the remote control Point the remote control at the REMOTE SENSOR located on the unit (see Front Panel illustration for precise location).

More information

INSTRUCTIONS FOR USE Pro-Ject Tuner Box S

INSTRUCTIONS FOR USE Pro-Ject Tuner Box S INSTRUCTIONS FOR USE Pro-Ject Tuner Box S Dear music lover, thank you for purchasing a Pro-Ject Audio Systems FM-tuner. In order to achieve maximum performance and reliability you should study these instructions

More information

YHT-22 QUICK-CONNECT GUIDE

YHT-22 QUICK-CONNECT GUIDE 1ST DAFT YHT-22 QUICK-CONNECT GUIDE INTODUCTION Yamaha developed the YHT-22 A/V Home Theater package to turn your home into a theater. In addition to enhancing the sound of a video source, like your TV,

More information

VSX-521-K AUDIO/VIDEO MULTI-CHANNEL RECEIVER. Operating Instructions

VSX-521-K AUDIO/VIDEO MULTI-CHANNEL RECEIVER. Operating Instructions VSX-521-K AUDIO/VIDEO MUTI-CHANNE ECEIVE Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu). Operating Instructions IMPOTANT The lightning flash

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1. Read, follow and keep these instructions safely. 2. Heed all warnings. 1. Do not use this apparatus near water. 2. Clean only with dry cloth. 3. Do not block any ventilation

More information

RX-V357. AV Receiver Ampli-tuner audio-vidéo

RX-V357. AV Receiver Ampli-tuner audio-vidéo G RX-V357 AV Receiver Ampli-tuner audio-vidéo OWNER S MANUAL MODE D EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING GEBRUIKSAANWIJZING ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

More information

ACUBRITE 23 SS. Manual. Stainless Steel Chassis 23" LCD Display. Content

ACUBRITE 23 SS. Manual. Stainless Steel Chassis 23 LCD Display. Content ACUBRITE 23 SS Stainless Steel Chassis 23" LCD Display Manual Introduction... 2 Hardware Installation... 2 The Display Timing... 5 The Display Outline Dimensions... 6 The Display Controls... 7 The Screen

More information

Stereo Cassette Deck

Stereo Cassette Deck 3-864-650-12(1) Stereo Cassette Deck Operating Instructions TC-TX333 1998 by Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock,

More information

Table of contents. Operating Instructions AV Control Receiver. Model No. SA-XR55

Table of contents. Operating Instructions AV Control Receiver. Model No. SA-XR55 Operating Instructions AV Control eceiver Model No. SA-X55 Table of contents Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the

More information

HD Digital Set-Top Box Quick Start Guide

HD Digital Set-Top Box Quick Start Guide HD Digital Set-Top Box Quick Start Guide Eagle Communications HD Digital Set-Top Box Important Safety Instructions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN

More information

CAUTION RISK OF ELECTRIC SHOCK NO NOT OPEN

CAUTION RISK OF ELECTRIC SHOCK NO NOT OPEN Evolution Digital HD Set-Top Box Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near

More information

User Guide. Connecting the Explorer 3350 Digital Home Communications Terminal

User Guide. Connecting the Explorer 3350 Digital Home Communications Terminal User Guide Connecting the Explorer 3350 Digital Home Communications Terminal Notice for CATV Installers CATV Installers Notice If you are a CATV installer, read the information in the box below. CONTENTS

More information

INSTRUCTIONS FOR USE Pro-Ject Tuner Box S2

INSTRUCTIONS FOR USE Pro-Ject Tuner Box S2 INSTRUCTIONS FOR USE Pro-Ject Tuner Box S2 Dear music lover, thank you for purchasing a Pro-Ject Audio Systems FM-tuner. In order to achieve maximum performance and reliability you should study these instructions

More information

RX-V630RDS AV Receiver DSP-AX630SE AV Amplifier

RX-V630RDS AV Receiver DSP-AX630SE AV Amplifier GB X-V630DS AV eceiver DSP-AX630SE AV Amplifier OWNE S MANUA MODE D EMPOI BEDIENUNGSANEITUNG BUKSANVISNING MANUAE DI ISTUZIONI MANUA DE INSTUCCIONES GEBUIKSAANWIJZING CAUTION: EAD THIS BEFOE OPEATING YOU

More information

PREAMPLIFIER INTRODUCTION INSTRUCTIONS FOR USE. Thank you for purchasing the Musical Fidelity A3 CR remote control preamplifier.

PREAMPLIFIER INTRODUCTION INSTRUCTIONS FOR USE. Thank you for purchasing the Musical Fidelity A3 CR remote control preamplifier. INTRODUCTION A3 CR PREAMPLIFIER INSTRUCTIONS FOR USE Thank you for purchasing the Musical Fidelity A3 CR remote control preamplifier. Used properly and carefully, it should give you many years of outstanding

More information

23"/58cm 20"/51cm 17"/44cm 15"/39cm. NOTE : No swivel base for 15"/17" models

23/58cm 20/51cm 17/44cm 15/39cm. NOTE : No swivel base for 15/17 models CD TV Thank you for purchasing this Philips CD Television set. You are now the proud owner of a CD TV set which promises full value to you as a customer. Before you proceed to install the CD TV, please

More information

Instructions for Use P.160-AP-8 (13/8) P.160-CP-8 (13/8) P.160-CP-12 (13/12) P.160-CP-16 (13/16)

Instructions for Use P.160-AP-8 (13/8) P.160-CP-8 (13/8) P.160-CP-12 (13/12) P.160-CP-16 (13/16) Satellite multiswitch Instructions for Use P.160-AP-8 (13/8) P.160-CP-8 (13/8) P.160-AP-12 (13/12) P.160-CP-12 (13/12) P.160-AP-16 (13/16) P.160-CP-16 (13/16) EMP-CENTAURI is a registered trademark Dear

More information

HTP-071 VSX-321-K-P HOME CINEMA PACKAGE. Operating Instructions

HTP-071 VSX-321-K-P HOME CINEMA PACKAGE. Operating Instructions HTP-071 VSX-321-K-P HOME CEMA PACKAGE AUDIO/VIDEO MUTI-CHANNE ECEIVE Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu). Operating Instructions

More information

Instructions for Use P.154-UP (9/4) P.155-UP (9/8) P.150-UP-12 (9/12) P.150-UP-16 (9/16)

Instructions for Use P.154-UP (9/4) P.155-UP (9/8) P.150-UP-12 (9/12) P.150-UP-16 (9/16) Satellite multiswitch Instructions for Use P.154-UP (9/4) P.155-UP (9/8) P.150-UP-12 (9/12) P.150-UP-16 (9/16) EMP-CENTAURI is a registered trademark Dear Customer, Thank you for buying the EMP-Centauri

More information

Colour television 21PT2324. Operating instruction

Colour television 21PT2324. Operating instruction Colour television 21PT2324 Operating instruction cover pg 1-2_21PT2324_71 1 03/25/04, 11:01 AM IMPORTANT Before you begin: Make sure your package includes the following items:tv and mains cord, remote

More information

Trinitron Color TV KV-XF21M80. Operating Instructions (1)

Trinitron Color TV KV-XF21M80. Operating Instructions (1) 3-866-0- () Trinitron Color TV Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. GB CT CS KV-XFM80 999 by Sony Corporation WARNING

More information

LINK-MI LM-WHD05B. Wireless HDMI AV Transmission System. User Manual

LINK-MI LM-WHD05B. Wireless HDMI AV Transmission System. User Manual LINK-MI LM-WHD05B Wireless HDMI AV Transmission System User Manual Table of Contents 1.Important Information... 3 1.1 Safety Precautions... 3 1.2 Declaration of Conformity... 4 1.3 Trademark Information...

More information

RX-V450. AV Receiver Ampli-tuner audio-vidéo

RX-V450. AV Receiver Ampli-tuner audio-vidéo G RX-V450 AV Receiver Ampli-tuner audio-vidéo OWNER S MANUAL MODE D EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING GEBRUIKSAANWIJZING ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

More information

Register your product and get support at www.philips.com/welcome SWW1890 User manual Contents 1 Important 4 Safety 4 English 2 Your Philips Wireless HD Net Connect 5 What is in the box 5 3 Overview 6

More information

ZVOX AccuVoice TV Speaker Model AV203

ZVOX AccuVoice TV Speaker Model AV203 ZVOX AccuVoice TV Speaker Model AV203 SETUP & OPERATION www.zvoxaudio.com 2 ZVOX AccuVoice TV Speaker Setup & Operation READ THIS FIRST Important Safety Instructions For ZVOX Audio System WARNING TO PREVENT

More information

Multi Room Audio Matrix Switcher

Multi Room Audio Matrix Switcher Multi Room Audio Matrix Switcher User s Guide 560884 ZONES 1 2 3 4 5 6 7 8 Copyright Clipsal Integrated Systems Pty Ltd 2005. All rights reserved. This material is copyright under Australian and international

More information

ZVOX AccuVoice TV Speaker Model AV203

ZVOX AccuVoice TV Speaker Model AV203 ZVOX AccuVoice TV Speaker Model AV203 SETUP & OPERATION www.zvoxaudio.com READ THIS FIRST Important Safety Instructions For ZVOX Audio System WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

More information

Colour television 21PT2324. Operating instruction

Colour television 21PT2324. Operating instruction Colour television 21PT2324 Operating instruction cover pg 1-2_21PT2324 1 02/17/04, 10:52 AM IMPORTANT Before you begin: Make sure your package includes the following items:tv and mains cord, remote control,

More information

QIP7232 P2. Hybrid QAM/IP High-definition Set-top. Quick Start Guide

QIP7232 P2. Hybrid QAM/IP High-definition Set-top. Quick Start Guide QIP7232 P2 Hybrid QAM/IP High-definition Set-top Quick Start Guide Before You Begin Introduction Congratulations on receiving a Motorola QIP7232 Hybrid QAM/IP High-definition Set-top. This document will

More information

Full High Definition LCD TV USER MANUAL

Full High Definition LCD TV USER MANUAL 1080p3 LCD TV Full High Definition LCD TV 1080p3 USER MANUAL Important Safety Precautions Important Safety Precautions 1 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates important instructions

More information

32" LED Television. Initial Assembly B. Main Unit. 1. Fix the Left Base Stand to the main unit using 2 pcs provided screws.

32 LED Television. Initial Assembly B. Main Unit. 1. Fix the Left Base Stand to the main unit using 2 pcs provided screws. 2 3 4 8047922B 32" LED Television Initial Assembly 8047922 Main accessories: Installation Steps: 1. Fix the Left Base Stand to the main unit using 2 pcs provided screws. 2. Fix the Right Base Stand to

More information

SYMBOLS USED ON THE RECEIVER... 3 SAFETY INSTRUCTIONS... 4 I.GENERAL INFORMATION...

SYMBOLS USED ON THE RECEIVER... 3 SAFETY INSTRUCTIONS... 4 I.GENERAL INFORMATION... Table of Contents SYMBOLS USED ON THE RECEIVER... 3 SAFETY INSTRUCTIONS... 4 I.GENERAL INFORMATION... 5 1. Preface... 5 2. Main Features... 5 3. General Operation of the Receiver... 6 4. Front Panel...

More information

U C A HTR Natural Sound AV Receiver Ampli-tuner audio-vidéo OWNER S MANUAL MODE D EMPLOI

U C A HTR Natural Sound AV Receiver Ampli-tuner audio-vidéo OWNER S MANUAL MODE D EMPLOI U C A HTR-5250 Natural Sound AV Receiver Ampli-tuner audio-vidéo OWNER S MANUAL MODE D EMPLOI SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

More information

MAX T200 HD QUICK INSTALLATION GUIDE

MAX T200 HD QUICK INSTALLATION GUIDE MAX T200 HD QUICK INSTALLATION GUIDE MAX T200 HD QUICK INSTALLATION GUIDE CONTENT receiver BATTERIES x 2 REMOTE CONTROL Quick installation guide Quick Installation Guide The lightning flash with arrowhead

More information

USER MANUAL. 22" Class Slim HD Widescreen Monitor L215DS

USER MANUAL. 22 Class Slim HD Widescreen Monitor L215DS USER MANUAL 22" Class Slim HD Widescreen Monitor L215DS TABLE OF CONTENTS 1 Getting Started Package Includes Installation 2 Control Panel / Back Panel Control Panel Back Panel 3 On Screen Display 4 Technical

More information

User Manual of digital Set Top Box PAT1 02

User Manual of digital Set Top Box PAT1 02 User Manual of digital Set Top Box PAT1 02 Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference. Important Safety Instructions 1) Read these

More information

TFT-LCD TV USER MANUAL W102T READ CAREFULLY BEFORE OPERATION W102T

TFT-LCD TV USER MANUAL W102T READ CAREFULLY BEFORE OPERATION W102T TFT-LCD TV W102T USER MANUAL READ CAREFULLY BEFORE OPERATION W102T IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates dangerous voltage inside the product

More information

CU103 User Manual. Contents

CU103 User Manual. Contents [Note] The Photos of Light Engine and Control Unit in this manual are for reference only. The items may be different in actual package. Contents 1. PRECAUTIONS... 2 2. PACKAGE CONTENT... 4 3. PORT DESCRIPTION...

More information

TV CHANNEL INSTALLATION

TV CHANNEL INSTALLATION LCD TV TV CHANNEL ATION Immediately after unpacking and plugging in your new television, run the auto program function to set up the TV for the broadcast or cable channels available in your area. If you

More information

Connecting the Explorer 3300 Digital Home Communications Terminal

Connecting the Explorer 3300 Digital Home Communications Terminal User Guide Connecting the Explorer 3300 Digital Home Communications Terminal POWE VO CH+ VO+ SEECT GUIDE INFO EXIT CH SETTINGS Notice for CATV Installers CATV Installers Notice If you are a CATV installer,

More information

KRF-V7010 KRF-V6010 KRF-V5010

KRF-V7010 KRF-V6010 KRF-V5010 AUDIO VIDEO SUOUND ECEIVE KF-V700 KF-V600 KF-V500 INSTUCTION MANUA KENWOOD COPOATION This instruction manual is for some models. Model availability and features (functions) may differ depending on the

More information

RX-V530RDS. AV Receiver Ampli-tuner audio-vidéo

RX-V530RDS. AV Receiver Ampli-tuner audio-vidéo GB RX-V530RDS AV Receiver Ampli-tuner audio-vidéo OWNER S MANUAL MODE D EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING CAUTION: READ THIS BEFORE

More information

IMPORTANT. General Points Please take note of the section entitled 'Tips' at the end of this booklet.

IMPORTANT. General Points Please take note of the section entitled 'Tips' at the end of this booklet. TV IMPORTANT Information for users in the UK (not applicable outside the UK) Positioning the TV For the best results, choose a position where light does not fall directly on the screen, and at some distance

More information

Standard Digital Terminal High-Definition Digital Terminal. User Guide

Standard Digital Terminal High-Definition Digital Terminal. User Guide Standard Digital Terminal High-Definition Digital Terminal User Guide ILL-GDA-STD-001-0709 IN THIS GUIDE IMPORTANT RULES FOR SAFE OPERATION... 4 AVAILABLE ILLICO TERMINALS... 5 REMOTE CONTROLS... 17 CONNECTIONS...

More information

Trinitron Color TV KV-AZ21. Operating Instructions M (1)

Trinitron Color TV KV-AZ21. Operating Instructions M (1) -65-7- () Trinitron Color TV Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. GB KV-AZ 005 Sony Corporation M30 A Specifications

More information

VR-510 INSTRUCTION MANUAL KENWOOD CORPORATION AUDIO VIDEO SURROUND RECEIVER. About the supplied remote control B MA (K, P) 0011

VR-510 INSTRUCTION MANUAL KENWOOD CORPORATION AUDIO VIDEO SURROUND RECEIVER. About the supplied remote control B MA (K, P) 0011 AUDIO VIDEO SUOUND ECEIVE V-510 INSTUCTION MANUA KENWOOD COPOATION About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation

More information

PT-600A INTEGRATED STEREO AMPLIFIER

PT-600A INTEGRATED STEREO AMPLIFIER EMOTE SENSO POWE PT-600A INTEGATED STEEO AMPIFIE BASS TEBE 0 0 2 2 2 2 4 4 4 4 6 6 6 6 8 8 8 8 10 10 10 10 PHONES PECAUTIONS Thank you for purchasing this HI-FI product. Taking time to read these operating

More information

GDB9 INSTRUCTION MANUAL DIGITAL TERRESTRIAL RECEIVER

GDB9 INSTRUCTION MANUAL DIGITAL TERRESTRIAL RECEIVER GDB9 INSTRUCTION MANUAL DIGITAL TERRESTRIAL RECEIVER Goodmans Support: www.goodmans.co.uk/support Please read these instructions before use and keep for future reference IMPORTANT SAFETY INSTRUCTIONS Thank

More information

NMS ETA TM Stereo Advanced Digital TV Set-top Box

NMS ETA TM Stereo Advanced Digital TV Set-top Box Digital TV HD Set-top Box STB2-T2 NMS ETA TM Stereo Advanced Digital TV Set-top Box User Guide CONTENTS Safety Information... 3 Introduction... 4 Set-top Box Front Panel... 4 Set-top Box Back Panel...

More information

Ampli-tuner audio-vidéo

Ampli-tuner audio-vidéo CA RX-V359 AV Receiver Ampli-tuner audio-vidéo OWNER S MANUAL MODE D EMPLOI IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE

More information

UK. Multi Channel Programmable Filter-Equalizer. User Manual FEATURES. - Designed for both digital and analogue channels,

UK. Multi Channel Programmable Filter-Equalizer. User Manual FEATURES. - Designed for both digital and analogue channels, Multi Channel Programmable Filter-Equalizer User Manual 6506 6506UK FEATURES - Designed for both digital and analogue channels, - 2 UHF input / 1 output, - 8 programmable clusters, - UHF channels 21 to

More information