DVH-1019 MK2 User Manual PULL

Transcription

1 DVH-1019 MK2 User Manual PULL

2 Safety Rules WARNING Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term electrical device,as used in the following, refers to mains operated electrical devices (corded) and to battery operated (cordless) electrical devices. Save these instructions. 1) Work area a) Keep work area clean and well lit. Cluttered and dark work areas invite accidents. b) Do not operate the unit on easily inflammable surfaces (e. g. paper, textiles, etc.) Or in inflammable environments. Fire hazard due to occurring heat build-up. 2) Electrical Safety a) The plugs of electrical devices must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) electrical devices. Unmodified plugs and matching outlets will reduce the risk of electric shock. d) Protect the electrical device from rain and moisture. The penetration of water in a battery charger increases the risk of electric shock. e) Check the electrical device, cable and plug each time before using. Do not use the electrical device when defects are detected. Do not open the electrical device yourself and have it repaired only by qualified personnel using original spare parts. Damaged electrical devices, cables and plugs increase the risk of electric shock. 3) Service a) Have repairs performed only by a qualified technician and only using original spare parts. This ensures that the safety of theelectrical device is maintained. NOTE: The power cable/disconnect device shall remain easy to operate/disconnect. b) Do not misuse the cord. Never use the cord for carrying, pulling or unplugging the electrical device. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock. c) Connect the electrical device to a mains supply that is properly connected to earth. Socket and extension cord must have an operative protective conductor.

3 CONTENTS CONTENTS...1 SAFETY PRECAUTIONS NOTES ON DISCS...4 LOCATION OF CONTROLS FRONT PANEL...5 BACK PANEL...5 DVD DISPLAY...5 REMOTE CONTROL...6 CONNECTIONS FUNCTION SETTING LANGUANG SETUP...10 VIDEO SETUP...11 AUDIO SETUP...12 RATING SETUP...13 MISC SETUP...14 BASIC OPERATIONS PLAY DISCS...15 SELECT ANGLAES...16 OSD...16 SELECT SUBTITLE...17 PLAY DISCS IN VARIOUS WAYS OTHERS TROUBLE SHOOTING...22 TECTNICAL SPECIFICATIONS...23

4 SAFETY PRECAUTIONS DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED.AVOID DIRECT EXPOSURE TO BEAM. CAUTION: HAZARDOUS LASER RADIA-TION WHEN OPEN AND INTERLOCK DEFEATED.

5 SAFETY PRECAUTIONS 3

6 NOTES ON DISCS 4

7 PULL LOCATION OF CONTROLS STANDBY 2.LED DISPLAY 3.SENSOR 4.DISC LOADING TRAY 5.OPEN/CLOSE 6.PLAY/PAUSE 7.STOP 8.3 IN 1 MMC 9.USB 10.COVER 1.Y.Pb/Cb.Pr/Cr VIDEO OUTPUT 2.VIDEO OUTPUT 3.FRONT LEFT AUDIO OUTPUT 4.CENTER AUDIO OUTPUT 5.SURROUND LEFT AUDIO OUTPUT 6.MASTER LEFT AUDIO OUTPUT 7.MASTER RIGHT AUDIO OUTPUT 8.DIGITAL AUDIO-COAXIAL OUTPUT 9.HDMI OUTPUT 10.S-VIDEO OUTPUT 11.DIGITAL AUDIO-OPTICAL OUTPUT 12.FRONT RIGHT AUDIO OUTPUT 13.SUBWOOFER AUDIO OUTPUT 14.SURROUND RIGHT AUDIO OUTPUT 15.SCART OUTPUT 16.POWER ON/OFF 17.POWER IN 5

8 LOCATION OF CONTROLS STANDBY N/P VIDEO RANDOM DEFAULT GOTO CARD/USB N/P VIDEO RANDOM DEFAULT GOTO CARD/USB ZOOM MENU/PBC OPEN/CLOSE NUMERIC KEYS ZOOM MENU/PBC SETUP SETUP OSD OSD TITLE PROG FAST BACKWARD PLAY/PAUSE STOP FAST FORWARD LANGUAGE ANGLE RETURN REPEAT A-B STEP FORWARD SLOW BACKWARD SLOW TITLE PROG ENTER CLEAR L/R MARK LANGUAGE ANGLE SUB-T + RETURN REPEAT A-B VOL - STEP SLOW MUTE ENTER L/R MARK CLEAR PREVLOUS NEXT SUB-T VOL+ VOL- MUTE 6

9 CONNECTIONS CONNECTING BY AV CABLE Connect the SCART out jack of this unit to the SCART IN jack of the TV set SCART input HIGH DEFINITION MULTIMEDIA HDMI OUTPUT Connect the HDMI cable to the TV and DVD unit.to enjoy the high quality resolution on the TV screen 7

10 CONNECTIONS 8

11 CONNECTIONS 9

12 DVD menu setup Press the SETUP button on the remote control, the SETUP MENU (main) will be displayed. After accessing the setup menu, press the direction buttons for up and down movement to select an item desired, then press the ENTER button to confirm.press LEFT direction button return to the menu of upper level. In the SETUP MENU, you may choose any of the following options as you like. To exit the setup, press the SETUP button again. LANGUAGE SETUP Select Language in the setup menu, and display the Language submenu: Language Video Audio Rating OSD Language Subtitle MP4 subtitle Audio DVD-menu : English : English : Western European : English : English Misc 1.1 OSD Language Use this item to select the language of the setup menu and screen display. 1.2 Subtitle This option provides the preset subtitle language. Follow the operating instructions stated in "DVD-MENU SETUP" in combination with the desired option. 1.3 MP4 subtitle MP4 Subtitle setting is used for choosing the language domain, (only for MP4). When you select one language domain (alphabet), when playback a MP4 with external subtitle, the subtitle display will shown this language alphabet. if you find the displaying subtitle words are incorrect, please ensure the external subtitle language and then select the correct language. 1.4 Audio Follow the operating instructions stated in "DVD-MENU SETUP" in combination with the desired option. This option provides the built-in disc dubbing language options. 1.5 DVD Menu This option provides the film's menu language options. Follow the operating instructions stated in "DVD-MENU SETUP" in combination with the desired option. 10

13 VIDEO SETUP Select Video in the setup menu, and display the Video submenu: Language Video Audio Rating Misc Aspect Ratio View Mode TV System Video out Brightness Smart Picture HD Resolution : 4:3PS : Auto Fit : PAL : S-VIDEO : Standard : Auto 2.1 Aspect Ratio 4:3 : Choosing this setting if your DVD player is connected to a normal ratio TV. You can fill the movie to the entire screen of your TV. This might mean that parts of the picture (the left and right edges) won t be seen. 16:9 : Choose this setting if your DVD player is connected to a wide screen TV. If you choose this setting and you don t have a wide screen TV, the images on the screen may appear distorted due to vertical compression. Notes: The image display ratio is related to the recorded disc format. Some disc can not display images in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on the left and right side of the screen. You must adjust the screen setting depending on the type of the television you have. 2.2 View Mode With this option you can select the different video vision mode on the screen. 2.3 TV System This product supports output of various system, including NTSC, PAL, Auto. If your TV set has only NTSC or PAL system, the screen will blink and become colorless when a wrong system is selected. In this case, press the N/P button on the Remote Control to switch the TV TYPE.. Note: For more information of output format, refer to the instructions or your TV set. 2.4 Video Output Selecting the Video Output setting to switch between different video outputs S-VIDEO:Video output is S-VIDEO. You must use a special S-VIDEO cabel and only this can be connected. YUV: Video output is YUV. Connect toyour TV with a 3 way RCA lead RGB: Set the video output to SCART output. If you select SCART connection, you should set up the play mode as RGB state, then it will output normally. P-Scan: Set the video output to progressive component output HDMI: Set the video output to high definition output 2.5 Brightness Press the SETUP button then press the DOWN direction button to select to Brightness mode, press the LEFT and the RIGHT direction button to adjust the player video output brightness. 2.6 HD(HDMI) Resolution Used to set the resolution of HDMI image output. In this option, you can select different HDMI image resolution. In the factory setup is on AUTO. Note: If TV screen has no output after selecting HD Resolution, on STOP MODE you can press VIDEO button to select to HDMI mode on TV screen, it will output normally. 11

14 AUDIO SETUP Select Audio in the setup menu, and display the Audio submenu. Language Video Audio Rating Misc Bass management Front speakers Center speaker Surround speakers Subwoofer Center spkr delay Surr spkr delay Digital output Pro logic : Off : Large : None : None : None : No Delay : No Delay : PCM : Off 3.1 Bass Management To enable or disable the Bass Management during operation of the player. On = Enable the Bass Management. Off = Disable the Bass Management. Press setup button to select the audio mode, press the direction button right to the bass management then press the down direction button to switch the bass management to on. To enjoy the 5.1ch. 3.2 Front Speaker To adjust the front speakers output to work in harmony with the audio equipment (e.g. Amplifier) connected to the player. You can select the speaker output in Large on Small, when Bass Management is On, the bass management is off, the front speaker output is on large mode only. 3.3 Center Speaker This function is operation for the bass management on only. Select the Large or Small output when the bass management is on. Select None to off the center speaker. 3.4 Surround Speaker This function is operation for the bass management On only. Select the Large or Small output when the bass management is on. Select None to off the Surround speaker. 3.5 Subwoofer This function is operation for the bass management on only. on the bass management On mode, select to Present to enjoy bass sound.select None to off the bass. 3.6 Center spkr Delay Selecting the Center Delay setting allows the user to enable/disable the center output delay. 3.7 Surr spkr Delay Selecting the Surr. Delay setting allows the user to enable/disable the Surround output delay. 3.8 Digital output Selecting the Digital Output setting allows the user to adjust the audio output on S/PDIF ports to work in harmony with the audio equipment (e.g. receiver, speakers) connected to the player. Off Digital audio output is disabled. PCM Select this option when you are going to use stereo signals (2 channels). You should combine this option with the option "Lower sampling rate," which we explain further on RAW If you select this option the player will use the DVD's original audio track. Use this option when you want to use the Dolby Digital AC3 signals through the optical or coaxial audio output. 3.9 Pro logic Off: Pro Logic decoding is off. Two-channel sources are output only on the left and right channels. On : Enable Pro Logic decoding 12

15 RATING SETUP In the Main Menu select Rating and the screen shows: To change the password, select Set Password. The factory default is 0000.Then press Set Password again to input new password. Language Video Parental control Set Password : 7.NC-17 Audio Rating Misc 4.1 Rating Selecting a Rating allows the user to set the parental control feature of the player. Select Parental Control and Press ENTER. Then enter the password and press ENTER. Press ENTER again to select the options then confirm by pressing ENTER. Kid Safe--Only 1 title with a parental control setting is allowed to play. G--Only 2 titles with a parental control setting or less are allowed to play. PG--Only 3 titles with a parental control setting or less are allowed to play. PG-13--Only 4 titles with a parental control setting or less are allowed to play. PG-R--Only 5 titles with a parental control setting or less are allowed to play. R--Only 6 or less titles with a parental control setting are allowed to play. NC-17--Only 7 or less titles with a parental control setting are allowed to play. Adult--Allow any title to play (factory default).

16 MISC SETUP Select MISC in the setup menu, and display the submenu: Language Use Default Settings Video Audio Rating Misc * Use Default Settings Reset setup data to factory default and re-load disc

17

18

19

20

21

22

23

24

25 DVH-1019 MK2

26