MODEL LC-32D53X LC-37D53X LCD COLOUR TELEVISION OPERATION MANUAL

Transcription

1 MODEL LC-D5X LC-7D5X LCD COLOUR TELEVISION OPERATION MANUAL CoverD5X.indd :8:

2 Blank page CoverD5X.indd :0:

3 LC-D5X LC-7D5X LCD COLOUR TELEVISION Dear SHARP customer OPERATION MANUAL Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. Contents Dear SHARP customer... Contents... Trademarks... Important Safety Precautions... Supplied accessories... Preparation... 5 Inserting the batteries... 5 Using the remote control unit... 5 Cautions regarding remote control unit... 5 Attaching the stand... 6 Setting the TV... 7 Basic connection... 8 Connecting to an antenna... 8 Connecting to the AC outlet... 8 Setting the TV on the wall... 9 Removing the stand... 9 Part names... 0 TV (Front)... 0 TV (Rear)... Remote control unit... Watching TV... Turning on the power... Turning off the power... Simple button operations for changing channels... Using Flashback (A) on the remote control unit... Using MPX on the remote control unit... Simple button operation for changing volume/sound... 5 Sleep timer... 5 ANALOG/DTV/RADIO buttons... 6 Basic adjustment settings... 7 Menu operation buttons... 7 On-Screen Display... 7 Menu items (TV/DTV/AV)... 8 Menu items (PC)... 8 Auto installation... 9 Programme setup... 9 Auto search... 9 Manual setting for each channel... 0 Search tuning... 0 Fine tuning... 0 Colour system... 0 Sound system (Broadcasting system)... Skipping channels... Sort... Label... Erase Programme... AV MODE selection... OPC (Optical Picture Control) setting... Picture adjustments... Advanced... 5 Colour temperature... 5 Fine Motion Advanced... 5 Film Mode... 5 Black... 5 D-Y/C... 6 Monochrome... 6 Audio adjustment... 6 Surround... 7 Power Control... 7 D5Xena.indd :7:0

4 Contents Basic adjustment settings (Digital)...9 DTV input mode menu items...9 Selecting DTV mode...9 EPG...0 Selecting a programme using EPG...0 Programme Guide... Info... Favourite Programme List... Programme List... Favourite & Lock... Parental Rate... Installation... Auto Search... Manual Adjust... Quick Search...5 Reset Data...5 Video Setup...5 Digital Output...6 Multilingual...6 Time Setup...7 I-Plate Setup (Information Plate Setup)...7 Information...7 Useful adjustment settings... 8 Password setting for child lock (for TV/DTV input mode)... 8 Input Skip... 9 Input Label... 9 Image position... 0 Wide Screen Signalling (WSS)... 0 Picture aspect ratio... Standby Mode... Reset... WIDE mode (for TV/AV input mode)... WIDE mode (for PC input mode)... Language setting for on-screen display... 5 Demo...5 DNR (Digital Noise Reduction)... 6 Input Select... 6 Output Volume Select... 7 Audio Only... 7 Game Play Time... 8 Colour system setting... 8 HDMI Setup... 9 PC Setup... 9 Input Signal (PC input mode only)...9 Adjusting the PC image automatically...50 Adjusting the PC image manually...50 Useful features... 5 Dual screen functions...5 Teletext function... 5 Teletext language setting... 5 Freezing images...5 Output Select...5 Using external equipment Displaying an external equipment image Displaying a DVD image (Example) Connecting a VCR Connecting a DVD player Connecting a game console or camcorder Connecting a Digital TV STB (Set Top Box) Viewing an image from a PC Connecting a PC Displaying an image from a PC Appendix Troubleshooting Troubleshooting (DTV) RS-C port specifi cations PC compatibility chart... 6 Specifi cations... 6 Optional accessory... 6 Dimensional drawings... 6 Trademarks The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project. Manufactured under license from Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. D5Xena.indd :9:

5 Important Safety Precautions Cleaning Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moisture Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement. Do not place vases or any other water-fi lled containers on this product. The water may spill onto the product causing fi re or electric shock. The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a sharp object. If the LCD panel is broken, be careful not to be injured by broken glass. Heat sources Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifi ers). To prevent fi re, never place any type of candle or naked fl ames on the top or near the TV set. Stand Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the manufacturer. To prevent fi re or shock hazard, do not place the AC power cord under the TV set or other heavy items. Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special care near children and pets. When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven fl oor surface can cause the product to fall from the cart. Ventilation The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insuffi cient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's instructions are followed. The LCD panel is a very high technology product with,7,6 thin fi lm transistors, giving you fi ne picture details. Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fi xed point of blue, green or red. This is within product specifi cations and does not constitute a fault. Precautions when transporting the TV Be sure to always carry the TV by two people holding it with two hands one hand on each side of the TV. Do not display a still picture for a long time, as this could cause an afterimage to remain. Install the product on the place where the AC cord can be unplugged easily from the AC outlet, or from the AC INPUT terminal on the rear of the product. D5Xena.indd :7:05

6 Supplied accessories Make sure the following accessories are provided with the product. Remote control unit AAA size battery (g) AC cord Page Page 5 Page 7 AC cord clamp Cable clamp Cable tie Page 7 Page 7 Page 7 Stand unit Operation manual Stand base Stand post Short screws (g) Long screws (g) Cloth Hex key Page 6 Always use the AC cord supplied with the TV. The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. The illustrations used throughout this manual are based on LC-7D5X. D5Xena.indd :7:06

7 Preparation Inserting the batteries Before using the TV for the fi rst time, insert two AAA size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new AAA size batteries. Open the battery cover. Insert two supplied AAA size batteries. Close the battery cover. Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. Do not mix batteries of different types. Different types of batteries have different characteristics. Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries. Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you fi nd any chemical leakage, wipe thoroughly with a cloth. The batteries supplied with this product may have a shorter life expectancy due to storage conditions. If you will not be using the remote control unit for an extended period of time, remove the batteries from it. Using the remote control unit Use the remote control unit by pointing it towards the remote sensor window. Objects between the remote control unit and sensor window may prevent proper operation. Remote control sensor 0 5 m 0 Cautions regarding remote control unit Do not subject the remote control unit to shock. In addition, do not soak the remote control unit with liquids, or place it in an area with high humidity. Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the unit. The remote control unit may not work properly if the remote sensor window of the TV is under direct sunlight or strong lighting. In such case, change the angle of the lighting or TV, or operate the remote control unit closer to the remote sensor window. 5 D5Xena.indd :7:06

8 Preparation Attaching the stand Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION Attach the stand in the correct direction. Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. Confi rm the 8 screws supplied with the TV. Short screws (g) (used in step ) Long screws (g) (used in step ) Insert the stand into the openings on the bottom of the TV. Insert and tighten the screws into the holes on the rear of the TV. Hex key Set the post for the stand unit onto the box. Attach the base to the post. Insert and tighten the screws into the holes on the bottom of the base. Screw Soft cushion Hex key Screw To detach the stand, perform the steps in reverse order. 6 D5Xena.indd :7:07

9 Preparation Setting the TV Notes on installing the TV Avoid direct sunlight and place the TV in a well-ventilated location. Place the TV in a level location. Connecting the AC cord, antenna, and external equipment to the TV AC cord clamp TV (rear view) See pages 8 and for connecting antennas and external equipment, such as VCR and DVD player. AC outlet AC cord Place the TV close to the AC outlet, and keep the power plug within reach. Bundling the cables Insert the cable clamp in the hole on the TV as shown. Cable clamp Cable tie CAUTION TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED. 7 D5Xena.indd :7:07

10 Preparation Simple operations for watching a TV programme Basic connection Connecting to an antenna To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable. Standard DIN55 plug (IEC69-) 75-ohm coaxial cable (round cable) Antenna cable (commercially available) Room antenna terminal (75-ohm type) To antenna terminal Connecting to the AC outlet Rear view AC outlet AC cord Always turn off the power of the TV when connecting the AC cord. Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time. 8 D5Xena.indd :7:08

11 Preparation Setting the TV on the wall You can mount the TV on the wall, using the optional AN-7AG bracket. For details, refer to the instructions supplied with the optional bracket. CAUTION This TV should be mounted on the wall only with the AN-7AG (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. <Example> Hanging on the wall AN-7AG wall mount bracket. (See the bracket instructions for details.) Regarding the angle when mounting the TV on the wall The maximum angle to which you can tilt the wall-mounted TV is as follows. Do not tilt it more than the maximum angle. LC-D5X LC-7D5X 0, 5, 0 0, 5 Vertical mounting Angular mounting Tilt the wall-mounted TV slowly when adjusting its angle. Removing the stand For wall mounting with the optional bracket, remove the stand. Before detaching/attaching the stand Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet. Remove all terminal covers and connected cables. Lay the TV down on cushioning (such as a blanket) over a table. Make sure two or more people perform the operation. CAUTION Do not remove the stand from the TV unless using an optional bracket to mount it. Hex key Unfasten the four screws used to secure the stand in place. Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.) To attach the stand, perform the above steps in reverse order. 9 D5Xena.indd :7:08

12 Part names TV (Front) Channel up (r)/down (s) buttons Volume up (e)/down (f) buttons TV/VIDEO button POWER (On/Off) button Remote control sensor OPC sensor OPC indicator* SLEEP timer indicator POWER indicator *OPC: Optical Picture Control (See page.) 0 D5Xena.indd :7:09

13 Part names TV (Rear) RS-C terminal INPUT (HDMI) terminal INPUT (HDMI) terminal INPUT 5 terminals Headphone jack DIGITAL AUDIO OUTPUT terminal AC INPUT terminal INPUT terminals INPUT terminals Antenna input terminal AUDIO OUTPUT terminal Regarding the headphone jack Use headphones with a stereo mini plug (Ø.5 mm). Be sure to unplug headphones from the jack when they are not in use. The speakers do not output volume when headphones are plugged in. Audio adjustments (page 6) do not affect the audio of connected headphones. You can set the volume to different levels for each input source. Volume display when headphones are plugged in 0 D5Xena.indd :7:09

14 Part names Remote control unit When using the remote control unit, point it at the TV. POWER (STANDBY/ON) To switch the power on and off. (See page.) 0 9 TV/DTV/External input mode: Set the channel. (See page.) TELETEXT mode: Set the page. (See pages, 5 and 5.) A (Flashback) Press to return to the previous channel or external input mode. (See page.) ATV Press to access ANALOG mode. (See page 6.) DTV Press to access DTV mode. (See page 6.) RADIO Press to access RADIO mode. (See page 6.) 5 MPX Select the sound multiplex mode. (See page.) 6 e (Mute) Mute the sound. (See page 5.) 7 VOLk/VOLl Set the volume. (See page 5.) 8 GUIDE DTV mode: Display the programme list. (See page.) 9 EPG DTV: To display EPG (Electronic Programme Guide) screen. (See page 0 to.) 0 a/b/c/d (Cursor) Select a desired item on the setting screen. (See pages 7 and 9.) ENTER Execute a command. EXIT Turn off the On-Screen Display. DEMO Press to show Fine Motion Advanced demostration in a split screen format. (See page 5.) OPC To switch Optical Picture Control on and off. (See page.) WIDE Change the wide image mode. (See pages and.) 5 FREEZE Freeze a motion picture on the screen. (See page 5.) 6 m (TELETEXT) ANALOGUE mode: Select the TELETEXT mode. (all TV image, all TEXT image, TV/TEXT image) (See pages 5 and 5.) DTV mode: Select the TELETEXT mode. (all TV image, TEXT image) k (Reveal hidden for TELETEXT) TELETEXT mode: Display hidden characters. (See page 5.) [ (SUBTITLE for TELETEXT) TV/INPUT mode: To turn the subtitles on and off. (See page 5.) (Hold) TELETEXT mode: Stop updating Teletext pages automatically. Press again to release the hold mode. (See pages 5 and 5.) (Subpage) TELETEXT mode: Display the Teletext subpage directly. (See page 5.) v (Top/Bottom/Full) TELETEXT mode: Set the area of magnifi cation. (See page 5.) 7 TV/VIDEO (INPUT SOURCE) Select an input source. (TV, DTV, INPUT, INPUT, INPUT, INPUT, INPUT 5) (See pages 9, 6, 55 and 58.) 8 FAV. DTV mode: Display the favourite programme list. (See pages.) 9 DISPLAY Display the channel or input information. TELETEXT mode: Display the time information included in the Teletext broadcast. (See page 5.) 0 SLEEP Set the Sleep timer. (See page 5.) CHr/CHs TV/DTV input mode: Select the channel. (See page.) TELETEXT mode: Select the page. (See pages 5 and 5.) INFO DTV mode: Display the programme information. (See page.) MENU Display the menu screen. (See page 7.) RETURN MENU mode: Return to the previous menu screen. (See pages 7 and 9.) 5 Colour (Red/Green/Yellow/Blue) TELETEXT mode: Select a page. (See page 5.) 6 AV MODE Select an audio and video setting. (See page.) 7 SELECT To select either screen to be active in Dual screen mode. 8 P&P Set the dual picture mode. Press P&P again to return to normal view. (See page 5.) D5Xena.indd :7:09

15 Watching TV Turning on the power Press POWER on the TV. POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.) After turning the power ON by pressing POWER on the TV, you can turn the power ON/OFF by pressing POWER on the remote control. Simple button operations for changing channels You can change channels in several ways. Using CHr/s on the remote control unit Press CHr to increase the channel number. Press CHs to decrease the channel number. POWER button CHr/s on the TV operates the same as CHr/s on the remote control unit. POWER indicator Turning off the power Press POWER on the remote control. The TV enters standby mode and the image on the screen disappears. The POWER indicator on the TV changes from green to red. Press POWER on the TV. The POWER indicator on the TV turns off. When the TV is turned off by POWER on the TV, you cannot turn on the power by pressing POWER on the remote control. POWER indicator Off Red Green POWER button Power off The TV is in standby mode. The TV is on. If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet. Minor power is consumed when the unit is in standby mode. Using 0 9 on the remote control unit Select the channels directly by pressing buttons 0 to 9. a To select a -digit channel (e.g. channel ): Press 0, followed by. To select a -digit channel (e.g. channel ): Press, followed by. When viewing Teletext information View a page directly which is -digit page number from 00 to 899 by pressing buttons 0 to 9. Channel display (Example) SAT. PAL B/G MONO D5Xenb.indd :7:

16 Watching TV Using Flashback (A) on the remote control unit When receiving a monaural signal Each time you press MPX, the mode switches between NICAM MONO and MONO. PAL NICAM Monaural mode BBC 99 B/G MONO BBC 99 MONO Press A to switch the currently tuned channel to the previously tuned channel. Press A again to switch back to the currently tuned channel. Press A to toggle between the currently selected input source and the previously selected one. In the TV mode of A TV broadcasts When receiving a stereo signal Each time you press MPX, the mode switches between STEREO and MONO. PAL NICAM BBC 99 B/G STEREO Stereo mode PAL NICAM BBC 99 B/G MONO Press A to return to the previous page in TELETEXT mode. Using MPX on the remote control unit When receiving a bilingual signal Each time you press MPX, the mode switches among CH A, CH B and CH AB. PAL NICAM Bilingual mode BBC 99 B/G CH A PAL NICAM BBC 99 B/G CH B In the NICAM TV broadcasts When receiving a stereo signal Each time you press MPX, the mode switches between NICAM STEREO and MONO. PAL NICAM BBC 99 B/G STEREO Stereo mode BBC 99 MONO PAL NICAM BBC 99 B/G CH AB When receiving a monaural signal When you press MPX, MONO displays. Monaural mode BBC 99 MONO When receiving a bilingual signal Each time you press MPX, the mode switches among NICAM CH A, NICAM CH B, NICAM CH AB and MONO. BBC and 99 are tentative network name and channel. Bilingual mode PAL NICAM BBC 99 B/G CH A PAL NICAM BBC 99 B/G CH B BBC 99 MONO PAL NICAM BBC 99 B/G CH AB D5Xenb.indd :7:6

17 Watching TV Simple button operation for changing volume/sound Sleep timer Allows you to set a time when the TV automatically switches to standby. Changing the volume You can change the volume on the TV or on the remote control unit. To increase the volume, press VOLk. To decrease the volume, press VOLl. Press SLEEP. Remaining time displays when sleep timer has been set. Sleep Timer: Remain hr. 00 min. Each time you press SLEEP, the remaining time switches as shown below. 0 hr. 0 min. hr. 00 min. hr. 0 min. Off hr. 0 min. hr. 00 min. 0 TV, DTV, INPUT, INPUT, INPUT, INPUT and INPUT5 (PC) modes can store volume adjustment values separately. Using Mute (e) on the remote control unit e mutes the current sound output. The sleep timer indicator on the TV lights up when the time has been set. When the time has been set, countdown automatically starts. Five minutes before the preset of time expires, the remaining time displays each minute. Select Off by pressing SLEEP to cancel the sleep timer. Press e. The sound is silenced. M is displayed while the mute function is on. Mute Press e again within 0 minutes to cancel the mute. Before 0 minutes, the volume level returns to the previous setting. Within 0 minutes after pressing e, press one of the buttons below to cancel the mute. VOLl/VOLk e Mute will be cancelled after 0 minutes. However, the TV will not suddenly output loud sound as the volume level will be set to 0 automatically. Increase the volume level by pressing VOLk. 5 D5Xenb.indd :6:6

18 Watching TV ANALOG/DTV/RADIO buttons Use the following buttons on the remote control to operate the menu. When you watch the TV for the first time When the TV powers on for the fi rst time after purchase, perform the auto installation. Analogue TV You can run the auto installation to set channels automatically. To watch the analogue TV, select Auto Installation from Setup menu. (See page 9.) After setting the channels, you can select a channel using CH r/s or 0 9 on the remote control unit. (See page.) DTV When the TV accesses to DTV mode for the fi rst time, you need to run the auto search. To scan all available services in your area, follow the procedures below. To watch DTV broadcasts, select Auto Search from installation menu. (See page.) After setting the channels, you can select a channel using CH r/s or 0 9 on the remote control unit. (See page.) ANALOG: Press to switch to analogue mode. After switching from DTV, radio or external input mode to analogue mode, the TV jumps to the most recently viewed analogue channel. DTV: RADIO: Press to switch to DTV mode. After switching from analogue, radio or external input mode to DTV mode, the TV jumps to the most recently viewed DTV channel. Press to switch to radio mode. After switching from analogue, DTV or external input mode to radio mode, the TV jumps to the most recently tuned radio channel. 6 D5Xenb.indd :0:5

19 Basic adjustment settings Menu operation buttons On-Screen Display Use the following buttons on the remote control to operate the menu. (Example) MENU [Option... Colour System] Option DTV Menu DNR Input Select Output Volume Select Audio Only Game Play Time Colour System HDMI Setup Fine Sync. Item displayed in yellow This indicates the item currently selected. Press ENTER to go to the adjustment screen for this item. Item displayed in white This indicates an item can be selected. Item displayed in grey This indicates that the item cannot be selected. * There are various reasons why items cannot be selected, but the main reasons are as follows:. Nothing is connected to the selected input terminal.. The function is not compatible with the current input signal. The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens. MENU: Press to open or close the menu screen. a/b/c/d: Press to select a desired item on the screen or adjust a selected item. ENTER: RETURN: Press to go to the next step or complete the setting. Press to return to the previous step. : Select ENTER : Enter RETURN : Back MENU : End The bar above is an operational guide for the remote control. The bar will change in accordance with each menu setting screen. 7 D5Xenc.indd :8:0

20 Basic adjustment settings Menu items (TV/DTV/AV) List of menu items to help you with operations Menu items (PC) List of menu items to help you with operations Picture Picture AV Mode... Page OPC... Page Backlight... Page Contrast... Page Brightness... Page Colour... Page Tint... Page Sharpness... Page Advanced Colour Temp..... Page 5 Fine Motion Advanced... Page 5 Film Mode... Page 5 Black... Page 5 D-Y/C... Page 6 Monochrome... Page 6 Reset... Page Audio AV Mode... Page Treble... Page 6 Bass... Page 6 Balance... Page 6 Surround... Page 7 Reset... Page 6 AV Mode... Page OPC... Page Backlight... Page Contrast... Page Brightness... Page Advanced Colour Temp.... Page 5 Black... Page 5 Reset... Page Audio AV Mode... Page Treble... Page 6 Bass... Page 6 Balance... Page 6 Surround... Page 7 Reset... Page 6 Power Control Power Management... Page 8 No Operation Off... Page 8 Ecology... Page 8 Power Control No Signal Off... Page 7 No Operation Off... Page 8 Ecology... Page 8 Setup Auto Installation... Page 9 Programme Setup...Pages 9- Child Lock... Page 8 Input Skip... Page 9 Input Label... Page 9 Position... Page 0 WSS... Page 0 : Mode... Page Standby Mode... Page Language... Page 5 Text Language... Page 5 Reset... Page Option DNR... Page 6 Input Select Input... Page 6 Input... Page 6 Output Volume Select... Page 7 Audio Only... Page 7 Game Play Time... Page 8 Colour System... Page 8 HDMI Setup... Page 9 Setup Input Skip... Page 9 Input Label... Page 9 Standby Mode... Page Language... Page 5 Text Language... Page 5 Reset... Page Option Input Select Input... Page 6 Input... Page 6 Output Volume Select... Page 7 Audio Only... Page 7 Game Play Time... Page 8 Fine Sync. Input Signal... Page 9 Auto Sync.... Page 50 H-Position... Page 50 V-Position... Page 50 Clock... Page 50 Phase... Page 50 Reset... Page 50 Some menu items may not be displayed depending on the selected input source. 8 D5Xenc.indd :0:5

21 Basic adjustment settings (Analogue) Auto installation You can run auto installation again, even after setting up the preset channels. Programme setup You can run the auto search procedure again at any time by accessing the Setup menu and Programme Setup. Channels can be tuned automatically or manually. Auto search You can also automatically search by performing the procedure below. This is the same function as programme auto search in auto installation. Press c/d to select Setup. Press c/d to select Setup. Press a/b to select Auto Installation, and then MENU [Setup... Auto Installation] Setup Option Press a/b to select Programme Setup, and then If you have already set the password, enter it here. See page 8 for setting a password. Auto Installation Programme Setup Child Lock Input Skip Input Label Position WSS : Mode Standby Mode Language Text Language Reset If you have already set the password, enter it here. See page 8 for setting a password. MENU [Setup... Programme Setup] Setup Option Auto Installation Programme Setup Child Lock Input Skip Input Label Position WSS : Mode Standby Mode Language Text Language Reset Press a/b to select Auto Search, and then 5 6 Press a/b to select Yes, and then press Press a/b to select the desired language listed on the screen, and then Press a/b to select the desired sound system, and then You do not need to do anything during the auto search. Search is completed. is displayed. Press MENU to exit. 5 Press a/b to select Yes, and then press Press a/b to select the desired sound system, and then Search is completed. is displayed. Press MENU to exit. 9 D5Xenc.indd :8:

22 Basic adjustment settings (Analogue) Manual setting for each channel You can set some channel items manually. They are Search, Fine (TV frequency), Colour System, Sound System, and Skip. Fine tuning Press a/b/c/d to select the channel you want to edit, and then The selected channel information displays. Press a/b to select Fine, and then press Press c/d to select Setup. Press c/d to adjust the frequency, and then press RETURN or MENU. Press a/b to select Programme Setup, and then If you have already set the password, enter it here. See page 8 for setting a password. Press a/b to select Manual Adjust, and then Adjust while checking the background picture as a reference. Search Fine Colour System Sound System Skip 79.5 MHz 5 Press a/b to select Yes, and then press Programme Setup Manual Adjust menu Instead of the method above, you can also set by directly entering the frequency number of the channel with 0 9. When setting a frequency on the Fine screen, the last fi gure of the frequency needs to be 0 or 5. 0 SAT. 0 PR07 0 KABEL a 79.5 MHz: Press s 7 s 9 s s MHz: Press 0 s s 9 s s 5. Colour system You can select one of the following settings. Search (See page 0.) Fine (See page 0.) Colour system (See page 0.) Sound system (See page.) 5 Skip (See page.) Search tuning Press a/b/c/d to select the channel you want to edit, and then The selected channel information displays. Press a/b to select Search, and then press Press a/b/c/d to select the channel you want to edit, and then The selected channel information displays. Press a/b to select Colour System, and then Receivable colour systems are listed. Search Fine Colour System Sound System Skip Colour system menu AUTO PAL SECAM NTSC.58 NTSC. PAL-60 Press a/b to select the optimum colour system, and then MENU [Setup... Programme Setup] Search Fine Colour System Sound System 79.5 MHz NEXT Skip As ENTER is pressed, the next channels will be searched in order. 0 D5Xenc.indd :8:

23 Basic adjustment settings (Analogue) Manual setting for each channel (continued) Sound system (Broadcasting system) Press a/b/c/d to select the channel you want to edit, and then The selected channel information displays. Press a/b to select Sound System, and then Receivable sound systems (Broadcasting systems) are listed. MENU Search Fine [Setup... Programme Setup] Sound system menu B/G Sort Channel positions can be sorted freely. Press c/d to select Setup. Press a/b to select Programme Setup, and then If you already set the password, enter it here. See page 8 for setting a password. Press a/b to select Sort, and then press Colour System Sound System Skip D/K I M 5 Press a/b to select Yes, and then press Press a/b to select the optimum sound system, and then Check the sound system if the sound output were not correct. Skipping channels Channels with Skip set to On are passed over when using CHr/s even if selected while watching the image from the TV. Press a/b/c/d to select the channel you want to edit, and then The selected channel information will be displayed Press a/b/c/d to select the channel you want to move, and then Move it to the desired position by pressing a/b/c/d, and then Repeat the steps 6 and 7 until all desired channels are sorted SAT. Sort menus 0 SAT. 0 KABEL Press a/b to select Skip, and then press Skip menu displays. Skip menu 0 SAT. 0 KABEL Search Fine Colour System Sound System Skip Off On 0 SAT. KABEL Press a/b to set Skip to On, and then 0 KABEL 0 KABEL 0 SAT D5Xenc.indd :8:

24 Basic adjustment settings (Analogue) Label Channels can be labelled freely. Erase Programme The individual programme can be erased. Press c/d to select Setup. Press c/d to select Setup. Press a/b to select Programme Setup, and then If you already set the password, enter it here. Press a/b to select Programme Setup, and then If you already set the password, enter it here. See page 8 for setting a password. See page 8 for setting a password. Press a/b to select Label, and then press Press a/b to select Erase Programme, and then 5 Press a/b to select Yes, and then press 5 Press a/b to select Yes, and then press 6 Press a/b/c/d to select the channel you want to label, and then 6 Press a/b/c/d to select the channel you want to erase, and then 7 Press a/b to select characters and c/d to move to the desired digit, and then press ENTER to complete the label setting. 7 8 Press ENTER to erase the channel. All the subsequent programmes move up. Repeat the steps 6 and 7 until all desired channels are erased. Erase programme menus 0 SAT. Pro7 0 KABEL SAT. 0 Pro7 0 KABEL SAT. 0 KABEL D5Xenc.indd :8:05

25 Basic adjustment settings (Analogue/Digital) AV MODE selection The AV MODE function enables you to select appropriate settings for audio and video to account for the system environment which can vary due to factors like room brightness, type of programme watched or the type of image input from external equipment. Using AV MODE on the remote control unit Press AV MODE. Present AV mode displays. Press AV MODE again before the mode displayed on the screen disappears. The mode changes as shown below. AV input mode Selected item STANDARD MOVIE GAME PC USER DYNAMIC (FIXED) DYNAMIC Description For a highly defi ned image in a normally bright room For a movie Lowers image brightness for easier viewing. For PC. (Available only when inputting an HDMI or INPUT5 signal.) Allows the user to customise settings as desired. You can set the mode for each input source. Changes the image and sound settings to the factory preset values. No adjustments are allowed. For a clear-cut image emphasising high contrast for sports viewing. AV Mode: STANDARD AV Mode: DYNAMIC AV Mode: MOVIE AV Mode: GAME You can select a different AV MODE item for each input mode. (For example, select STANDARD for ANALOGUE TV input and DYNAMIC for INPUT.) AV Mode: DYNAMIC (FIXED) AV Mode: PC OPC (Optical Picture Control) setting AV Mode: USER (TV) PC input mode You can set the TV to automatically adjust the screen to suitable backlight brightness according to the lighting conditions. AV Mode: STANDARD AV Mode: PC AV Mode: USER [ ] Using AV Mode on the menu screen OPC indicator Using OPC on the remote control unit Press c/d to select Picture. Press a/b to select AV Mode, and then Press a/b to select the desired item, and then Press OPC to switch the OPC function on and off. OPC indicator Light off Off is selected in the OPC setting. Lighted (Green) On or On (Display) is selected in the OPC setting. D5Xend.indd :8:6

26 Basic adjustment settings (Analogue/Digital) Using OPC on the menu screen Adjustments items MENU [Picture] Picture Audio Press c/d to select Picture. AV Mode OPC [STANDARD] [Off] Press a/b to select OPC, and then press Press a/b to select the desired item, and then Backlight [+ 6] Contrast [ 0] Brightness [ 0] Colour [ 0] Tint [ 0] Selected item On (Display) On Off Description Displays the OPC effect on the screen while adjusting the brightness of the screen. Automatically adjusts The brightness is fi xed at the value set in Backlight (See page ). Sharpness [ 0] Advanced Reset Selected item Backlight Contrast cbutton The screen dims For less contrast + dbutton The screen brightens For more contrast Brightness For less brightness For more brightness Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light. Colour For less colour intensity For more colour intensity Picture adjustments Tint Skin tones become purplish Skin tones become greenish You can adjust the picture to your preference. Sharpness For less sharpness For more sharpness Follow the steps to adjust the picture. Select Advanced and then press ENTER to set Colour Temp., Fine Motion Advanced, Film Mode, Black, D-Y/C or Monochrome. See pages 5 and 6. Press c/d to select Picture. Press a/b to select a specifi c adjustment item. Press c/d to adjust the item to your desired position. For resetting all adjustment items to factory preset values, pressa/b to select Reset, press ENTER, press a/b to select Yes, and then Backlight cannot be adjusted when OPC is set to On or On (Display). D5Xend.indd :8:7

27 Basic adjustment settings (Analogue/Digital) Advanced Advanced setting enables you to set the picture adjustment in more detail. There are six options you can choose from. Film Mode Automatically detects a fi lm-based source (originally encoded at /5 frames/second, depending on the vertical frequency), analyses it then recreates each still fi lm frame or high-defi nition picture quality. Colour temperature Adjusts the colour temperature to give the best white image. Press c/d to select Picture. Repeat steps to in Colour temperature. Press a/b to select Film Mode, and then Press a/b to select On, and then press Press a/b to select Advanced, and then Film Mode is not selectable depending on the input signal type. 5 Press a/b to select Colour Temp., and then Press a/b to select the desired level, and then Selected item High Mid-High Middle Mid-Low Low Fine Motion Advanced Description White with bluish tone White with reddish tone Use Fine Motion Advanced to view fast-action video more clearly. Repeat steps to in Colour temperature. Black For easier viewing, change the viewing depth by selecting a level for automatically adjusting the dark portion of an image. Repeat steps to in Colour temperature. Press a/b to select Black, and then press Press a/b to select On, and then press Colour Temp. Fine Motion Advanced Film Mode Black D Y/C Monochrome On Off Press a/b to select Fine Motion Advanced, and then Press a/b to select On, and then press Selected item On Description For high detail in black portions. Selected item Description Off No adjustment. On For obtaining a clear image. Off Normal image. Fine Motion Advanced may cause image noise. If this occurs, set the function to Off. 5 D5Xend.indd :8:7

28 Basic adjustment settings (Analogue/Digital) D-Y/C Provides high quality images with minimal dot crawl and cross colour noise. Audio adjustment You can adjust the sound quality to your preference with the following settings. Press c/d to select Picture. Press a/b to select Advanced, and then Press c/d to select Audio. Audio STANDARD Power Control Press a/b to select D-Y/C, and then press Colour Temp. Fine Motion Advanced Film Mode Black D Y/C Monochrome Standard Fast Slow Off Treble Bass Balance Surround Reset [ 0] + [ 0] [ 0] L Press a/b to select the desired menu item. Press ENTER to proceed if necessary. + R 5 Press a/b to select the desired level, and then Selected item Standard Fast Slow Off Normal adjustment For movie image For still image D-Y/C off Description D-Y/C is not selectable depending on the input signal type. D-Y/C may not operate depending on the input signal type or noisy input signal. Selected item Treble Bass Balance Press a/b or c/d to select the desired item or adjust the item to the desired level. Press ENTER if necessary. cbutton For weaker treble For weaker bass Decrease audio from the right speaker dbutton For stronger treble For stronger bass Decrease audio from the left speaker For resetting all adjustment items to factory preset values, press a/b to select Reset, press ENTER, press a/b to select Yes, and then Monochrome For viewing a video in monochrome. Repeat steps to in D-Y/C. Press a/b to select Monochrome, and then Press a/b to select On, and then press 6 D5Xene.indd :9:0

29 Basic adjustment settings (Analogue/Digital) Surround When you set to On, you can enjoy surround sound, the same as if you were in a movie theatre. Selected item On Off Description Makes it possible to enjoy natural, realistic surround sound. Outputs the normal sound. Power Control Power control setting allows you to save energy. No Signal Off When set to Enable, the power will automatically shut down if no signal inputs for 5 minutes. Using Surround on the menu screen You can produce Surround effects from the Audio setting. Press c/d to select Audio. Press c/d to select Power Control. Power control menu displays. Press a/b to select No Signal Off, and then Press a/b to select Enable. Five minutes before the power shuts down, remaining time displays every minute. Press a/b to select Surround, and then Audio STANDARD Power Control Disable is factory preset value. When a TV programme fi nishes, this function may not operate. Treble [ 0] + Bass Balance Surround Reset [ 0] [ 0] L + R Press a/b to select On, and then press 7 D5Xene.indd :9:

30 Basic adjustment settings (Analogue/Digital) Power Management When set, the power will automatically shut down if no signal is input for a certain time. No Operation Off When set to Enable, the power will automatically shut down if there is no operation for hours. Press c/d to select Power Control. Power control menu displays. Press c/d to select Power Control. Power control menu displays. Press a/b to select Power Management, and then Press a/b to select No Operation Off, and then Press a/b to select Mode or Mode, and then Press a/b to select Enable. Five minutes before the power shuts down, remaining time displays every minute. Off Mode Mode Disable is factory preset value. Selected item Off Mode Description No power management. Factory preset value. If no signal inputs for approximately 8 minutes, the power shuts down. Even if you start using the PC and the signal inputs again, the TV stays off. The TV turns on again by pressing POWER. (See page.) Ecology When set Yes, the TV activates the following power saving mode. OPC set to On (Page ) Standby Mode set to Mode (Page ) No Signal Off set to Enable (Page 7) No Operation Off set to Enable (Page 8) Power Management set to Mode (Page 8) Press c/d to select Power Control. Power control menu displays. Mode If no signal inputs for approximately 8 seconds, the power shuts down. When you start using the PC and the signal inputs again, the TV turns on. The TV turns on again by pressing POWER. (See page.) Press a/b to select Ecology, and then Press a/b to select Yes, and then press If you turn off the power by disconnecting AC cord when setting Mode in power management, the TV may not function properly after turning the power on again. In such case, press POWER on the remote control unit. Pressing POWER on the TV will have the same result. Ecology mode cannot be deactivated by selecting No. Each setting must be changed individually to deactivate Ecology mode. 8 D5Xene.indd :9:

31 Basic adjustment settings (Digital) DTV input mode menu items List of DTV menu items to help you with operations Programme Programme List... Page Edit Channel Favourite & Lock... Page Parental Rate... Page Setup Installation Auto Search... Page Manual Adjust... Page Quick Search... Page 5 Reset Data... Page 5 System Setup Video Setup... Page 5 Audio Setup Digital Output... Page 6 Multilingual... Page 6 Time Setup... Page 6 I-Plate Setup... Page 7 Option Information... Page 7 The illustrations and on-screen displays in this manual are for explanation purposes and may vary slightly from the actual operations. Selecting DTV mode DTV Menu > Programme Programme Setup Option a/b/c/d: Press to select a desired item on the screen or adjust a selected item. ENTER: RETURN: Press to go to the next step or complete the setting. Press to return to the previous step. 9 D5Xenf.indd :9:5

32 Basic adjustment settings (Digital) EPG What is an EPG? An EPG (Electronic Programme Guide) is a programme schedule, which is displayed on the TV screen. The EPG is broadcasted together with DTV. The TV screen shows the EPG when the viewer presses EPG on the remote control, provided that the TV is receiving the digital broadcasting signal. The EPG enables you to search for a programme, do timer recording or view the programme schedule in detail. Selecting a programme using EPG Basic Operation H Display the EPG screen Press EPG. EPG Jan :00 Jan :00 00:00 0:00 0: HD Monosco HD Monosco 00 Color Bar 576i Color Bar 576i 00 Monosco 576- Monosco Monosco 576- Monosco HD Monosco HD Monosco 00 Color Bar 576i Color Bar 576i 00 Monosco 576- Monosco Monosco 576- Monosco 576- : Select R Programme info G Previous Day Y Next Day H Display the EPG screen Press c/d to select the time span you want to search. Continue to press d to display programmes in the next time span. Press a/b to select the desired programme. If a or b are displayed on the left of the services, continue to press a/b to display next or previous screen. 5 H Close the EPG screen Press EPG again. Selecting a programme Check programme information Check previous day programme information Press a/b/c/d to select the programme you want to check. Press G. Press R. Press a/b to select the desired genre, and then EPG Jan :0 Jan :00 00:00 0:00 0: HD HD Monosco Monosco 00 Color Bar 576i Color Bar 576i 00 Monosco 576- Monosco 576- Press a/b to select a programme you want to watch, and then 00 Monosco 576- Monosco HD Monosco 00 Color Bar 576i 00 Monosco Monosco 576- Monosco 576- :00-0:00 Monosco 576- HD Monosco Color Bar 576i Monosco 576- Monosco 576- EPG Dec :00 Dec :00 00:00 0:00 0: HD Monosco No Info 00 Color Bar 576i No Info 00 Monosco 576- No Info 00 Monosco 576- No Info 000 HD Monosco No Info 00 Color Bar 576i No Info 00 Monosco 576- No Info 00 Monosco 576- No Info No Info 00:00-00:00 No Info : Select R Programme info Programme Information G Previous Day Y Next Day Press OK to tune to the selected programme. : Select R Programme info G Previous Day Y Next Day 0 D5Xenf.indd :5:7

33 Basic adjustment settings (Digital) 5 Search for next day programme Press Y. Press c/d to select the desired time span, and then EPG Jan :0 Jan :00 00:00 0:00 0: HD Monosco Color Bar 576i Monosco 576- Monosco 576- HD Monosco Color Bar 576i Monosco 576- Monosco 576- HD Monosco Color Bar 576i Monosco 576- Monosco 576- HD Monosco Color Bar 576i Monosco 576- Monosco 576- Monosco 576- :00-0:00 Monosco 576- : Select R Programme info G Previous Day Y Next Day Press a/b to select the desired programme, and then When you select a programme outside of the current time span, the timer setting screen displays. (Page 0) D5Xenf.indd :5:8

34 Basic adjustment settings (Digital) Programme Guide You can check the schedule of DTV events and view detailed information about current or future events. While the I-Plate is still on the screen, you can press INFO on the remote control again to call up the extended programme information of the current TV channel. Press INFO again and you call up the extended information on the next programme. Pressing INFO again will not display the information for the next programme if No Available Event Text under Next is displayed. Press GUIDE to display the programme guide list. Press a/b to display your desired programme, and then When you press ENTER, the TV jumps to the channel BBC ONE Programme Guide ABC : BBC TWO CBBC Channel Now ABC ( :0 - :0 ) BBC NEWS [Montreux Jazz Festival 00] -00 ABC Melbourne Next ABC ( :0 - :0 ) [The New Inventors] Favourite Programme List When you are watching terrestrial TV channels, you can call up the Favourite Programme List using FAV. on the remote control. Press FAV. to display the Favourite Programme list. Info While watching DTV you can check the extended programme information on the screen using INFO on the remote control. Press a/b to select your desired channel, and then Favourite Programme List BBC TWO CBBC Channel BBC NEWS INFO -00 Jun 5 :5 TTX Mpeg ABC Melbourne ABC NOW : Montreux Jazz Festival 00 :0 - :0 NEXT : The New Inventors General INFO screen Current channel number Date and current local time Teletext Audio system (Dolby D or MPEG) 5 Parental rate 5 6 Station name 7 Service name 8 Current programme name 9 Time for the current programme 0 Next programme name G Refer to Favourite & Lock to register channels to your Favourite Programme List. (See page.) Changing channels within the Favourite Programme List Repeat steps and in Favourite Programme List. Select the registered channels in the Favourite Programme List using CH r/s on the remote control unit or the TV. The information plate pops up with the symbol on the left of the channel. Selecting channels other than Favourite Programmes Directly input the number of the channel you want to watch using 0l9 on the remote control unit or select the channel from Programme List in the Programme menu. D5Xenf.indd :5:55

35 Basic adjustment settings (Digital) Programme List Selected item Description You can select the desired programme from the programme list. Press c/d to select Option. Press a/b to select DTV menu, and then FAV Lock You can easily select your favourite channel from the Favourite Programme List. When the channel is locked, you must enter your password whenever you tune to the channel. Press ENTER again to cancel FAV ( ) or Lock ( ) settings. 5 Press a/b to select Programme, and then Press a/b to select Programme List, and then Programme List Edit Channel TV Programme List Parental Rate This function allows TV channels to be restricted. It prevents children from watching violent or sexual scenes that may be considered inappropriate. Repeat steps to in Programme List BBC ONE 000 BBC TWO 000 CBBC Channel 000 BBC NEWS Press a/b to select your desired programme number and name, and then Favourite & Lock Assign channels to Favourite or to Lock groups. Press a/b to select Edit Channel, and then If you have already set the password, enter it here. If not, enter the factory preset password. See page 8 for setting a password. Press a/b to select Parental Rate, and then Favourite & Lock Parental Rate Repeat steps to in Programme List. Press a/b to select your desired rating, and then 5 Press a/b to select Edit Channel, and then If you have already set the password, enter it here. If not, enter the factory preset password. See page 8 for setting a password. Press a/b to select Favourite & Lock, and then Favourite & Lock Parental Rate CH No CH Name FAV Lock BBC ONE BBC TWO CBBC Channel BBC NEWS Press a/b to select your desired channel. Press c/d to select FAV or Lock, and then Selected item General and above (G) Parental Guidance and above (PG) Mature and above (M) Mature Adult and above (MA) Adult Violence (AV) Restricted and above (R) No Block ( ) Description Content is not offensive to most viewers. Content is such that parents may not want their children to view the programme. Mature Audience only. This programme is specifi cally designed to be viewed by adults and therefore may be unsuitable for children under 5. Mature Adult only. Mature Audience only. This programme is specifi cally designed to be viewed by adults and therefore may be unsuitable for children under 5. Not for children under age 5. Strong elements of sex and/or violence. Not for children under age 8. Strong elements of sex and/or violence. Cancel the blocking. D5Xenf.indd :5:7

36 Basic adjustment settings (Digital) Installation The fi rst time the receiver is powered on, Programme list is empty will display on the screen. Under the main menu, select Installation and enter into the submenu. Manual Adjust You can set some channel items manually. Repeat steps to 5 in Auto Search. Auto Search You can automatically search for and download TV channels. Press c/d to select Option. Press a/b to select Manual Adjust, and then Press 0l9 orc/d to select a channel number. Channel settings apply to channels -69. Press a/b to select the desired menu item, and make sure the correct frequency is selected. Channel No : Press a/b to select DTV menu, and then Frequency : KHz Signal Level : 9% Press a/b to select Setup, and then press Quality : SNR : 5dB Start Scan 00% Press a/b to select Installation, and then If you have already set the password, enter it here. If not, enter the factory preset password. See page 8 for setting a password. Press a/b to select Auto Search, and then Press c/d to select Yes, and then press Auto search starts. Programme auto search. You do not need to do anything during the auto search. Once the DTV signal is scanned, the channel number and programme name will be shown on the programme list. The indicator operates concurrently with scanning channels and shows the progress made. 5 Press a/b to select Start Scan, and then If a signal lock in, Start Scan will change to Get Channel Success. Then you can press EXIT to leave the installation page and watch a programme or continue scanning for other channels. Anytime you watch a DTV channel and want to know the Signal Level, Quality or SNR, enter into this page. If a signal does not lock in, Start Scan will show Timeout Error. You can scan the signal again, or refer to the Signal Level and Quality for aligning the direction of the antenna to get the signal. Signal Level: The signal power or intensity from the broadcasted frequency. Quality: The clean level of the signal from the broadcasted frequency. SNR: The rate of signal and noise to radiated frequency. D5Xenf.indd :5:9

37 Basic adjustment settings (Digital) Quick Search If you live in the cities or regions listed in the Quick Search menu, you can scan all DTV channel signals. Press c/d to select Option. Video Setup This function allows you to select an output format. Press c/d to select Option. Press a/b to select DTV menu, and then Press a/b to select DTV menu, and then Press a/b to select Setup, and then press Press a/b to select Setup, and then press 5 Press a/b to select Installation, and then If you have already set the password, enter it here. If not, enter the factory preset password. 5 6 Press a/b to select System Setup, and then Press a/b to select Video Setup, and then See page 8 for setting a password. Video Setup 6 Press a/b to select Quick Search, and then Audio Setup Time Setup I-Plate Setup Auto Search Manual Adjust Output Format Quick Search Fix Reset Data Auto Adelaide Quick Search 7 Press a/b to select your desired item, and then Brisbane Melbourne Selected item Description Perth Sydney Fix Displays every DTV broadcast converted to 080i. 7 Press a/b to select your city or region listed on the screen, and then Auto Displays the DTV broadcast in the format it is received. If channel frequency is changed by the local TV station or a new channel comes up, you have to scan these channels using Manual Adjust. Reset Data Use this function to clear the channel data. Repeat steps to 5 in Quick Search. Press a/b to select Reset Data, and then Press c/d to select Yes, and then press 5 D5Xenf.indd :5:9

38 Basic adjustment settings (Digital) Digital Output This function allows you to select your favourite audio output system. 5 Press c/d to select Option. Press a/b to select DTV menu, and then Press a/b to select Setup, and then press Press a/b to select System Setup, and then The DIGITAL AUDIO OUTPUT terminal outputs only DTV audio. When you are watching a programme on Analogue TV or images from external equipment, audio from the DTV channels still outputs from the DIGITAL AUDIO OUTPUT terminal. The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. (The audio of the content you are viewing is output from the terminal.) The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software. Multilingual You can select a different audio language when the broadcast has different audio language. Repeat steps to 5 in Digital Output. 6 Press a/b to select Audio Setup, and then Press a/b to select Multilingual, and then 7 Press a/b to select Digital Output, and then Digital Output Multilingual Digital Output Multilingual Audio Language Language (Dolby D) Language (Mpeg) Digital Output PCM Dolby Digital 8 Press a/b to select your desired output system, and then Press a/b to select your desired audio language, and then Selected item Description Selected item Description PCM The optical output format is normally in PCM. Language (Dolby D) You can enjoy Dolby Digital audio. Outputs Dolby Digital audio from the digital output. Dolby Digital Dolby Digital audio will be output when there is a Dolby Digital audio signal. The output will be in PCM when there is no Dolby Digital audio signal. Language (Mpeg) You can enjoy Mpeg audio. Outputs PCM audio from the digital output regardless of the Digital Output setting. Using Digital Audio Output It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. PCM audio outputs from the terminal. Optical fi bre cable (commercially available) To optical digital input of external audio devices 6 D5Xenf.indd :5:9

39 Basic adjustment settings (Digital) Time Setup Information This function allows you to select your local time zone. 5 6 Press c/d to select Option. Press a/b to select Setup, and then press Press a/b to select System Setup, and then Press a/b to select Time Setup, and then You can check the current version of the hardware and software on the screen. Press c/d to select Option. Press a/b to select DTV menu, and then Press a/b to select DTV menu, and then 5 Press a/b to select Option, and then press Press a/b to select Information, and then Information S/W Update Video Setup Audio Setup Time Setup I-Plate Setup Time Zone NSW/ACT System Information S/W Version : AUPI7T DTrtfG Release Time : MAR :00:5 7 Press c/d to select your local time zone, and then I-Plate Setup (Information Plate Setup) This function allows you to confi gure the display time and time format for the information plate. Repeat steps to 5 in Time Setup. Press a/b to select I-Plate Setup, and then Video Setup Audio Setup Time Setup I-Plate Setup Press a/b to select your desired item. Press c/d to select your desired value, and then Display Time Time Format 5 sec HR 7 D5Xenf.indd :5:0

40 Useful adjustment settings Password setting for child lock (for TV/DTV input mode) Allows you to use a password to protect certain settings from being accidentally changed. Setting a channel Repeat steps to in Setting a password. Press a/b to select Channel Setting, and then Press a/b to select Yes, and then press Change Password Channel Setting Reset Yes No Setting a password Register a -digit password number to use the Child Lock function. Press c/d to select Setup. Press a/b to select Child Lock, and then If you already set the password, enter it here. Resetting the password Allows you to reset your password. Press a/b/c/d to select the channel that you wish to apply the Child Lock, and then Repeat steps to in Setting a password. Press a/b to select Reset, and then press 5 Press a/b to select Change Password, and then Press a/b to select Yes, and then press Change Password Channel Setting Reset New Password Reconfirm Change Password Channel Setting Reset Yes No 6 Enter the -digit number as a password using 0 9. Change Password Channel Setting Reset New Password Reconfirm As a precautionary measure, make a note of your password on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach. This function is only available for TV/DTV input mode. To relock a channel which has been temporarily unlocked by inputting the correct password, turn power off and then on again. 7 Enter the same -digit number as in step 6 to confi rm. To view a locked channel you must enter a password. When you select a locked channel, a password prompt message pops up. 8 D5Xeng.indd :0:6

41 Useful adjustment settings Input Skip This setting allows you to skip the HDMI or PC input on the Input Selection operation. Input Label You can assign each input source a label you like. Press c/d to select Setup. Press a/b to select Input Skip, and then Press TV/VIDEO to select the desired input source. Press a/b to select the Input (INPUT, INPUT or INPUT 5) you wish to skip, and then INPUT Press c/d to select Setup. INPUT INPUT 5 Yes No Press a/b to select Input Label, and then 5 Press a/b to select characters and c/d to move to the desired digit to label the input source. 5 6 Press a/b to select Yes, and then press Press MENU to exit. 6 When you want to change the input label that you have already assigned to the default name, press c/d to move to CLEAR on the Input Label screen, and then Repeat the above until the name is fully spelt out, and then press MENU. The name can be 6 characters or less. When you want to set an input source name of less than 6 characters, press MENU to exit from the labelling menu. TV DTV INPUT INPUT DVD INPUT INPUT5 (Example) You cannot change labels if the input source is TV or DTV. 9 D5Xeng.indd :9:

42 Useful adjustment settings Image position For adjusting a picture s horizontal and vertical position. Wide Screen Signalling (WSS) WSS allows a television to switch automatically among the different screen formats. Press c/d to select Setup. Press c/d to select Setup. Press a/b to select Position, and then Press a/b to select WSS, and then press Press a/b to select H-Position or V-Position. Press a/b to select On or Off, and then 5 H-Position [ 0] + V-Position [ 0] + Reset Press c/d to adjust the item to your desired position. Try to set WIDE mode if an image does not switch to the correct screen format. When the broadcast signal contains no WSS information, the function will not work even if enabled. Selected item H-Position V-Position Description Centres the image by moving it to the left or right. Centres the image by moving it up or down. For resetting all adjustment items to the factory preset values, press a/b to select Reset, and then press Adjustments are stored separately according to input source. Images may not be displayed properly depending on the settings and/or input signals. 0 D5Xeng.indd :0:8

43 Useful adjustment settings Picture aspect ratio The WSS signal has : auto-switching that allows you to select between Panorama and Normal. Standby Mode Standby Mode may be set to either start the TV quickly from standby or conserve energy while on standby. Press c/d to select Setup. Press c/d to select Setup. Press a/b to select : Mode, and then Press a/b to select Standby Mode, and then Press a/b to select Panorama or Normal, and then Press a/b to select Mode or Mode, and then WSS signal : screen : mode Panorama : mode Normal Selected item Mode Mode Description Starting the TV is quick from standby. Power consumption is small during standby. 5 Press MENU to exit. Selected item Panorama Normal Description Wide image without side bars Normal range keeping : or 6:9 aspect ratio D5Xeng.indd :0:8

44 Useful adjustment settings Reset If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. Press c/d to select Setup. Press a/b to select Reset, and then press Press a/b to select Yes, and then press After the reset has completed, the power shuts off and then comes back on. The screen will have returned to its original settings. D5Xeng.indd :0:8

45 Useful adjustment settings WIDE mode (for TV/AV input mode) WIDE MODE Normal Zoom :9 Panorama Full Cinema 6:9 Cinema :9 : Mode set to Panorama : Mode set to Normal Manual Selection Press WIDE. The WIDE MODE menu displays. The menu lists the wide mode options selectable for the type of video signal currently received. Press WIDE or a/b while the WIDE MODE menu displays on the screen. As you toggle down the options, each is immediately refl ected on the TV. Auto Selection If you set WSS and : Mode in the Setup menu on pages 0 and, the optimum WIDE mode is automatically chosen for every broadcast containing the WSS information. WSS menu To enable Auto Selection, set WSS in the Setup menu to On. (See page 0.) : Mode menu To set the type of the wide screen, select Panorama or Normal in the : Mode menu. (See page.) If the broadcast signal contains no WSS information, Auto Selection will not function even when the WSS option is enabled. Selected item Description Normal Zoom :9 Panorama Full Cinema 6:9 Cinema :9 For : standard pictures. A side bar appears on each side. For :9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes. In this mode the picture is progressively stretched toward each side of the screen. For 6:9 squeeze pictures. For 6:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. For :9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Normal Zoom :9 Panorama Some screen sizes may not be displayable depending on the input signal. Cinema :9 Cinema 6:9 Full D5Xeng.indd :0:8

46 Useful adjustment settings WIDE mode (for PC input mode) You can select the screen size. Connect the PC before making adjustments. (See page 58.) Selectable screen size may vary with input signal type. Press WIDE. The WIDE MODE menu displays. WIDE MODE Normal Full Press WIDE or a/b to select a desired item on the menu. a Screen size images. Input Signal Normal Full 0g768 60g768 Keeps the original aspect ratio in a full screen display. An image fully fi lls the screen. D5Xeng.indd :0:9

47 Useful adjustment settings Language setting for on-screen display You can also select a language from setup menu. Select from among languages: English, Simplifi ed Chinese, Traditional Chinese and Arabic. Demo Fine Motion Advanced technology provides superior solutions for digital display picture quality removing motion blur. Press c/d to select Setup. Press a/b to select Language, and then Press a/b to select the desired language listed on the screen, and then Press DEMO on the remote control unit to show Fine Motion Advanced demonstration in a split-screen format. This effect is greater on fast moving images. Demo function will release and back to normal mode when press any button. 5 D5Xeng.indd :0:9

48 Useful adjustment settings DNR (Digital Noise Reduction) Produces a clearer video image. Press c/d to select Option. Input Select Selecting input source Can use for selecting the input source. Using TV/VIDEO on the remote control unit or on the TV TV/VIDEO allows you to choose from the available input sources. Press a/b to select DNR, and then press Press a/b to select the desired level, and then Press TV/VIDEO on the remote control unit or TV/VIDEO on the TV. Off High Low Press TV/VIDEO on the remote control unit or TV/VIDEO on the TV to select the input source. An image from the selected source automatically displays. You can also select the input source by pressing a/b. Selecting input signal type For setting the signal type of external equipment. 5 Press c/d to select Option. Press a/b to select Input Select, and then Press a/b to select an input source among Input and Input, and then Press a/b to select the desired level, and then Input source Input Input Selectable item Input (Auto), Input (COMPONENT), Input (S-VIDEO), Input (VIDEO), Output Auto, COMPONENT, VIDEO 6 If no (colour) image displays, try to change the other signal type. Check the operation manual of the external equipment for the signal type. When the signal type is set to Auto, the input terminal where cable is connected is automatically selected. When the signal type is set to Auto and multiple video signal cables are connected, the signal type is selected in the following prioritised order: Input : COMPONENT s S-VIDEO s VIDEO Input : COMPONENT s VIDEO When the signal type for INPUT5 is set to DIGITAL or ANALOGUE, a PC or AV signal is automatically detected. When Input is set to Output, Input will become video out function. D5Xeng.indd :9:06

49 Useful adjustment settings Output Volume Select Allows you to select what controls the audio output. Press c/d to select Option. Press a/b to select Output Volume Select, and then Press a/b to select Fixed or Variable, and then Audio Only When listening to music from a music programme, you can set the display off and enjoy audio only. Press c/d to select Option. Press a/b to select Audio Only, and then Press a/b to select On, and then press Fixed Variable Selected item On Off Description Audio is output without screen image. Both screen images and audio are output. Selected item Fixed Variable Description Sound via speakers is adjusted with VOL k/l on the remote control unit or the TV. Sound via the MONITOR OUTPUT terminal is not adjustable and constantly outputs. Sound via the MONITOR OUTPUT terminal is adjusted with VOL k/l on the remote control unit or the TV. Sound via speakers is muted. When you make operations that change the picture on the TV such as by changing the input source, the Audio Only function is set to Off. The Audio menu cannot be operated when headphones are plugged in or when Variable is selected. 7 D5Xeng.indd :0:0

50 Useful adjustment settings Game Play Time This function displays the elapsed game time so you do not lose track of the time. To display the elapsed time, select GAME for the input mode of the terminal connected to the game console before starting the game. Colour system setting You can change the colour system to one that is compatible with the image on the screen. Press c/d to select Option. Press c/d to select Option. Press a/b to select Colour System, and then Press a/b to select Game Play Time, and then Press a/b to select On, and then press Press a/b to select a compatible video signal system of your equipment, and then press AUTO PAL Selected item On Off Description The elapsed time is displayed every 0 minutes when you switch to GAME mode in external input mode. No adjustment. SECAM NTSC.58 NTSC. PAL-60 Factory preset value is AUTO. If AUTO is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC.). 8 D5Xenh.indd :0:

51 Useful adjustment settings HDMI Setup HDMI (High-Defi nition Multimedia Interface) terminal selection. To watch an HDMI equipment image, select INPUT or INPUT using TV/VIDEO on the remote control unit or on the TV. Press c/d to select Option. Press a/b to select HDMI Setup, and then The HDMI Setup can be selected only when INPUT or INPUT is selected. PC Setup Input Signal (PC input mode only) Some input signals may have to be registered manually to display properly. The input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again. You can only select the Input Signal on the Setup menu when receiving one of the input signals listed above. 0 g g 768 MENU [Option... HDMI Setup] Option DTV Menu DNR Input Select Output Volume Select Audio Only Game Play Time Colour System HDMI Setup 5 Press c/d to select Option. Press a/b to select Fine Sync., and then Press a/b to select Input Signal, and then Press a/b to select the desired input signal on the display, and then 5 Fine Sync. Press a/b to select the desired item or setting, and then 0 x x Press a/b to select the desired setting, and then HDMI Setup items Selectable items Description (Example) Auto View Enable/Disable Set whether or not to use WIDE MODE based on signal recognition, including an HDMI signal. Audio Select Digital/Analogue Select Digital for audio signal via the HDMI terminal. Select Analogue for audio signal via the AUDIO jack. Refer to your external equipment operation manual for these settings. Audio Select is only available for INPUT. 9 D5Xenh.indd :0:

52 Useful adjustment settings Adjusting the PC image automatically This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available RGB cable, etc. Adjusting the PC image manually Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimise the image. Press c/d to select Option. Press c/d to select Option. Press a/b to select Fine Sync., and then Press a/b to select Fine Sync., and then 5 Press a/b to select Auto Sync., and then Press a/b to select Yes, and then press Press a/b to select a specifi c adjustment item among H-Position, V-Position, Clock and Phase. Input Signal Auto Sync. Auto Sync. starts. H-Position [90] + MENU [Option... Fine Sync.] V-Position [60] + Clock [90] + Input Signal Phase [ 8] + Auto Sync. H-Position [ 0] V-Position [ 0] Yes No Reset Clock Phase Reset [ 0] [ 0] Auto Sync. is likely to succeed when an input PC image has wide vertical stripes (e.g. pattern with high contrast stripes, or cross-hatched). It may fail when an input PC image is solid (low contrast). Be sure to connect the PC to the TV and switch it on before starting Auto Sync. Selected item H-Position V-Position Clock Phase Description Centres the image by moving it to the left or right. Centres the image by moving it to the up or down. Adjusts when the image fl ickers with vertical stripes. Adjusts when characters have low contrast or when the image fl ickers. 5 6 Press c/d to adjust the item to your desired position. Press MENU to exit. For resetting all adjustment items to factory preset values, press a/b to select Reset, and then Images may not be displayed properly depending on the settings and/or input signals. 50 D5Xenh.indd :0:

53 Useful features Dual screen functions Allows you to display two pictures on the screen at one time. Dual screen You can display two pictures except when inputting from the RS-C or PC INPUT terminal. Press P&P. Dual screen displays and a selected input source image displays. Press SELECT to set either screen to be active. z displays on the active screen, which has sound output. Press TV/VIDEO to select another input source on the active screen. A selected image displays. Press P&P to exit dual screen. This function does not work under the following input conditions: Two pictures from the same source (e.g. INPUT and INPUT ), Two pictures with different vertical frequency (e.g. PAL and PAL-60, PAL (50 Hz) and NTSC (60 Hz)) When you press P&P, the current input is moved to the left side screen display, and the other input appears on the right side screen display. When you cannot acquire dual screen capability, perform the operation below. Select another input whose vertical frequency is same as one of the current inputs (e.g. PAL and PAL). When this function is not available, No dual screen display available. will display. 5 D5Xeni.indd ::08

54 Useful features Teletext function What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather reports, sports information, stock exchange prices and programme previews are among the many services available. Teletext mode Teletext is turned on/off with m on the remote control unit. You can operate your TV in Teletext mode directly by inputting commands with the remote control unit. TELETEXT TELETEXT This dual screen cannot be displayed in DTV mode. When viewing the Teletext information Press CHr to increase the page number. Press CHs to decrease the page number. Button functions Colour (Red/Green/Yellow/Blue): You can select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding Colour (Red/Green/ Yellow/Blue) on the remote control unit. TELETEXT Red Green Yellow Blue 0 9: Directly select any page from 00 to 899 by using 0 9. Turning on and off Teletext Select a TV channel or external input source providing the Teletext programme. v (Top/Bottom/Full): Each time you press v, the TELETEXT image switches as shown below. Full (Displays in full screen) 5 Press m to display the Teletext. Press m again to display the Teletext on the right screen and normal image on the left screen. Each time you press m, the screen switches as shown upper right. If you select a programme with no Teletext signal, No Teletext available. is displayed. Top (Displays in the upper half of the screen) Bottom (Displays in the lower half of the screen) This function is not available in DTV mode. k (Reveal hidden for TELETEXT): To reveal hidden information such as an answer to a quiz, press k. Press k again to hide the information. (Hold): To stop updating Teletext pages automatically, press. Press again to release the hold mode. D5Xeni.indd ::0