BROADCAST RECEIVER. Installation Guide (BR-100-MOT, BRP-100-MOT) Document Version 1.0. BR-100-MOT, BRP-100-MOT Installation Guide

Size: px

Start display at page:

Download "BROADCAST RECEIVER. Installation Guide (BR-100-MOT, BRP-100-MOT) Document Version 1.0. BR-100-MOT, BRP-100-MOT Installation Guide"

Kathleen Lamb
6 years ago
Views:

1 BROADCAST RECEIVER (BR-100-MOT, BRP-100-MOT) Installation Guide Document Version 1.0 i BR-100-MOT, BRP-100-MOT Installation Guide

2 INSTALLATION CONSIDERATIONS Installation and maintenance of the Broadcast Receiver should only be performed by qualified, competent personnel that have appropriate training and experience. Every effort has been made to ensure the installation instructions presented in this document are clear and easy to understand; however, if you are not sure how to perform any of the instructions provided, DO NOT CONTINUE THE INSTALLATION. The Broadcast Receiver must be installed in accordance with all Local and National Electrical Codes. STANDARDS COMPLIANCE FCC Part 15, Sub-part B of FCC Rules for a Class B Digital Device QA Manufactured to ISO 9001 Operating Temperature: -30 F to +120 F (-34 C to +49 C) For field service support, please call (888) Additional information regarding Energy Connections products and services, including manuals and instructions, can be found at our website at The information in this document is Copyrighted by COM/Energy Technologies, Incorporated, and may not be reproduced in part or whole without the expressed written permission of COM/Energy Technologies, Incorporated, its heirs or its successors. The information herein may not be used for the purpose of design, manufacture, sale or other activities which constitute business transactions without the expressed written permission by COM/Energy Technologies, Incorporated, its heirs or its successors. The specifications herein are for use with the product with which this document was shipped. COM/Energy Technologies reserves the right to change specifications without notice on future shipments of same or like products. Trademarks used in this document: the Energy Connections Logo is a registered trademark of COM/Energy Technologies, Incorporated. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. COM/Energy Technologies, Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Copyright by COM/Energy Technologies, Inc. ii BR-100-MOT, BRP-100-MOT Installation Guide

3 Installation Procedures: BR-100-MOT Wall Mount 1. Mount the Broadcast Receiver on an outside wall free of metal supports and electrical interference. NOTE: The Broadcast Receiver contains a MHz paging receiver and should not be mounted near electrical appliances or metal obstructions. DO NOT mount to inside of metal structures without the external antenna option (see BRP-100 installation on next page). 2. Run conduit and connect L1, L2 (black wires), and Ground (green/black striped wire) to power (20A maximum branch). After making wire connections, apply power and make sure that the green LED is lit in the viewing window. Service Pin L1 LED Viewing Window Circuit Breaker Panel Junction Box Broadcast Receiver Model BR-100-MOT -- Wall Mount 1 BR-100-MOT, BRP-100-MOT Installation Guide

4 Installation Procedures: BRP-100-MOT Pad Mount 1. Mount the Broadcast Receiver on the inside cover of the pedestal. 2. Drill a 1/2" hole through the top of the pedestal and prepare the surface for adhesive mounting of the antenna. 3. Remove retaining nut and plate, run antenna lead through hole, remove paper peel-off from bottom of antenna exposing adhesive and mount antenna to top of pedestal enclosure. Replace retaining nut and plate to secure antenna. Attach lead to Broadcast Receiver TNC connector. 4. Connect L1, L2 (black wires), and GND (green/black striped wire) to the power source. After making wiring connections, apply power and make sure that the green power LED is lit in the viewing window Antenna Service Pin To 240V S econdary Power Line LED Viewing Window Antenna Lead Broadcast Receiver Model BRP-100-MOT Pad Mount 2 BR-100-MOT, BRP-100-MOT Installation Guide

5 RETURN TO FACTORY WARRANTY POLICY General Energy Connections products are covered by a one (1) year Return to Factory Warranty. The Warranty covers failure of any unit due to workmanship or component failure, provided the product has not been misused, incorrectly installed, or subjected to environmental conditions that exceed the product's specification. Products must be installed and serviced by electricians certified by COM/Energy Technologies. Obtaining a Return Materials Authorization To return a unit, a Return Materials Authorization (RMA) must be obtained by calling (888) prior to returning a faulty unit. Please provide the operator with the following information from the faulty product: Model Number Serial Number, as located on the product name plate Supplier, if other than COM/Energy Technologies Please also provide any additional information, if available, regarding date of purchase or installation that may expedite replacement of the faulty unit. Replacements Units COM/Energy Technologies will ship a replacement unit on the next business day after the RMA is issued. Shipment will be via overnight express when available. To reduce the downtime, COM/Energy Technologies will ship you a replacement unit based on the diagnosis, as reported through the RMA process, and prior to receipt of the faulty unit. This will minimize problems arising from the disconnection of the faulty unit from the network. Please remember that the products are connected to potentially lethal voltages and, as a result, licensed electricians must perform removal and replacement operations. At its discretion, COM/Energy Technologies will ship a like product having functionality that, in COM/Energy Technologies sole opinion and discretion, is equal to or exceeds that of the faulty product to be replaced. The replacement product may be a new or reconditioned unit. The replacement product is warranted to be free from defect for a period of one (1) year from the date of the originally installed unit. 3 BR-100-MOT, BRP-100-MOT Installation Guide

6 Fault Diagnosis It is your responsibility to determine if a unit is actually faulty in the network to which it is connected. Therefore, it is important that you secure the services of a trained Energy Connections' service technician or licensed repair service agency to test, diagnose, and replace the unit. Any unit returned to the factory that is not faulty and is not diagnosed as faulty by an Energy Connections' trained service technician or licensed repair service agency will be charged to you at full list price, regardless of whether it is a new unit or reconditioned. (Services of an Energy Connections' trained service agent are free of charge for 90 days from the date of installation.) Packing and Labeling Returned units must be packed in the carton in which the replacement was shipped to you. The RMA documentation enclosed with the replacement unit describes how and where to ship the unit. The return shipping label, included in the documents, is to be placed over the original shipping label (i.e., the label used to address the unit to you). Obligation to Return Faulty Units You must return the faulty unit to the factory within ten (10) calendar days of obtaining an RMA. Units not returned within the ten (10) day period will be billed to you as a new unit. If there is an unforeseen delay in your ability to return a faulty unit, please call (888) to extend the RMA period and to prevent being billed for a new unit. 4 BR-100-MOT, BRP-100-MOT Installation Guide

Golf ball tracker. Instruction manual

Golf ball tracker. Instruction manual Golf ball tracker Instruction manual General Intended use The Prazza golf ball finder is intended for use on the golf course only and should never be used inside the home or any other enclosed environment.the