Fiber Optic Digital Video Insertion System for PON with 1550 Overlay & RFoG Networks (DVISf):

Transcription

1 Features: A cost-effective, edge-based & seamless solution for inserting locally generated content (eg. security cameras or localized advertising) in MDUs that are being served with a PON with overlay or RFoG network Locally encodes up to 10 SD (or 5 HD) programs in MPEG-2/H.264 (see specifications for details), multiplexes into a QAM carrier & transmits optically for insertion into optical network that services the MDU User defined insertion wavelength ensures no optical interference with broadcast video wavelength User settable QAM frequency ensures that inserted QAM does not interfere with any of the broadcast video QAMs Fully integrated audio/video encoders, multiplexer, QAM modulator, optical transmitters & 1 or 4-port EDFA modules Scalable wall mount solution: from 1-10 encoded programs & 1-10, 12, 13 or 16 optical output options Hot-swappable encoder cards, optical transmitters & 1 or 4-port EDFA modules No-video screen in case of loss of input video; user can create custom on-screen text/design HTTP-based GUI allows for easy set-up & control; one-click configuration download & upload allows for efficient bulk configuration management (MPEG/QAM) Local front panel access to EDFA settings DVISf (open view) DVISf (closed view) Application Diagram MDU ONT / ONU ONT / ONU RFoG / PON WITH 1550 OVERLAY FIBER DISTRIBUTION HUB ONT / ONU OPTICAL OUT #1 DVISf LOCAL A/V OPTICAL OUT #16 Page 1 of 7

2 BASE PLATFORM SPECIFICATIONS CHASSIS OVERVIEW (Max) ENCODED PROGRAMS DVISf Specifications H x W x 12.0 D (40.0H x 43.3W x 30.5D cm), Wall Mount, Lockable Front Door 55.7 lbs (25.3 kg) Up to 10 into one QAM Channel, Scalable (plug-in cards with 1 or 2 encoders per card) POWER SUPPLY IEC Connector / VAC, 50/60 Hz POWER CONSUMPTION DEVICE MANAGEMENT OPERATING TEMPERATURE HUMIDITY TS MULTIPLEXER PACKET SIZE TS SUPPORT 165W HTTP / SNMP Network Interface (RJ45) 0⁰C to +50⁰C (+32⁰F to +122⁰F) 0-95% (without condensation) 188 Bytes QBA, AF PROGRAM NUMBER & TS NUMBER User Settable (Program #: ; TS ID: ) PSI / SI / PSIP INFORMATION TABLE PAT, PMT, SDT, NIT, MGT, CVCT SETTABLE PIDs PMT, PCR (0x0015-0x1FFE; dec ) QAM MODULATOR / RF UPCONVERTER QAM MODULATION MODULATION FORMAT RF QAM OUTPUT POWER AT RF OUT (Max) ATTENUATOR ATTENUATOR STEP -T J.83 Annex A/Annex B/Annex C 16, 32, 64, 128, 256 QAM /- 1.5 dbmv 0-26 db 1.0 db RF QAM FREQUENCY OUTPUT RANGE (1) MHz (1) SUPPORTED CHANNEL PLANS FREQUENCY STEP RF QAM CHANNEL BANDWIDTH STANDARD, HRC, IRC 250 khz 6 MHz (Annex B) Max. 8 MHz (Annex A/C) EXCESS BANDWIDTH SYMBOL RATE Annex B: 12% (256 QAM), 18% (64 QAM) Annex A: 15% Annex C: 13% Annex B: Automatically Set with Selected Modulation Format MSymb/s QAM MSymb/s - 64 QAM Annex A/C: max. 7 MSymb/s MER EQUALIZED (2) > 40 db (2) FREQUENCY OFFSET SYMBOL RATE OFFSET CARRIER SUPPRESSION SIGNAL/NOISE SPURIOUS TS PROCESSING FEC RF INTERFACES RF OUT RF INPUT (On Transmitter Module) OPTICAL OUTPUT TRANSMITTER MODULES 4-PORT (4 Outputs for use with EDFA Modules) < 2ppm < +/- 50 Hz > 55 db > 45 db -60 db Null Packet Insertion & PCR Correction -T J.83 Annex B; DVB-C EN & -T J.83 Annex A/C F, 75 Ω, Jumpered to Optical Transmitter Module F, 75 Ω 1 F Input, 4 SC/APC Outputs 2.5 dbm per Output, Wavelength DWDM C-band 22 to 46 (user specified) (3) For more details, see DVFTX Specifications 1-PORT 1 F Input, 1 SC/APC Output (High Output Transmitter. Not for use if EDFA Modules Output Power 12 dbm +/- 1 db (fixed), Wavelength DWDM C-band 22 to 46 (user specified) (3) are required) For more details, see DVFTX-12 Specifications EDFA MODULES 4-PORT 1-PORT NOTES: (1) Extended Tune Range MHz. Contact ATX for details. (2) Measured with Rohde & Schwarz EFA (FW Ver 05.33). (3) See Ordering Information. 1 SC/APC Input, 1 SC/APC Test Output (-24 db tap port), 4 SC/APC Output Ports, Output Power: dbm (user adjustable) DVISf base platform can accept up to four 4-port EDFA modules For more details, see DVF4E Specifications 1 SC/APC Input, 1 SC/APC Test Output (-30 db tap port), 1 SC/APC Output Port, Output Power: dbm (user adjustable) DVISf base platform can accept up to four 1-port EDFA modules For more details, see DVF1E Specifications Page 2 of 7

3 DVISf Specifications (cont d) HD/SD ENCODER CARD SPECIFICATIONS PUTS COMPONENT DV1HDA 3x RCA Female CHROMA FORMAT YPbPr 4:2:2 RESOLUTIONS PC - VGA 480p_60 (59.94) 576p_50 720p_60 (59.94) 720p_ i_60 (59.94) 1080i_50 DE-15 Female, 15-Pin, 3 Rows CHROMA FORMAT RGB 4:4:4 RESOLUTIONS AUDIO INPUTS ANALOG L/R DIGITAL SPDI/F AUDIO STANDARD MAX CHANNELS VIDEO PROCESSING 640 x 480, 60 Hz 800 x 600, 60 Hz 1280 x 720, 60 Hz 1024 x 768, 60 Hz 1280 x 1024, 60 Hz 1366 x 768, 60 Hz 1400 x 1050, 60 Hz 1920 x 1080, 60 Hz TRS 3.5 mm Female, 2x RCA Adapter Female 1x RCA (Coaxial) Female IEC 61937:AC3 (Pass Through) 6 (5.1) Pass Through ENCODING MPEG-2 H.264 ENCODE LEVEL MPEG-2 HD HL High Profile Level 5 CHROMA 4:2:0 4:2:0 BIT RATE 1-25 Mbps 1-25 Mbps COMPONENT VIDEO RESOLUTIONS VGA RESOLUTIONS 480p_60 (59.94) 576p_50 720p_60 (59.94) 720p_ i_60 (59.94) 1080i_ x 480, 60 Hz 800 x 600, 60 Hz 1280 x 720, 60 Hz 1024 x 768, 60 Hz 1280 x 1024, 60 Hz 1366 x 768, 60 Hz 1400 x 1050, 60 Hz 1920 x 1080, 60 Hz VIDEO PID SETTING Yes (0x0015-0x1FFE; dec ) VBI PROCESSING AUDIO PROCESSING AUDIO ENCODER Closed Captions ENCODE STANDARD Dolby Digital AC-3 ATSC A/52 (2.0) SAMPLE RATE BIT RATE 48 khz 192, 256, 384 kbps AUDIO PID SETTING Yes (0x0015-0x1FFE; dec ) DIGITAL AUDIO PASS THROUGH AC-3 (2.0/5.1) PASS THROUGH Yes (S/PDIF) 6.5 H x 0.75 W x 3.0 D (16.5H x 1.9W x 7.6D cm) 0.33 lbs (0.15 kg) NOTE: Dolby is a registered trademark of Dolby Laboratories. Manufactured under license from Dolby Laboratories. DV1HDA Page 3 of 7

4 DVISf Specifications (cont d) SD ENCODER CARD SPECIFICATIONS VIDEO DV1CE / DV1CEM INPUT CVBS, NTSC / PAL (1) DV2CE / DV2CEM INPUT INTERFACE 1x BNC, 75 Ω 2x BNC, 75 Ω ENCODING FORMAT ENCODING BIT RATE TYPE VIDEO ADJUSTMENTS VIDEO PROCESSING RESOLUTION MPEG-2, 4:2:0, MP@ML CBR Brightness, Contrast, Saturation TBC HORIZONTAL 720, 704, 544, 528, 480, 352 VERTICAL 480, 576 FRAME RATE 29.97fps, 25fps (1) VIDEO ENCODING BIT RATE 1-8 Mbps GOP STRUCTURE IBBP - Length 15 VIDEO PID SETTING Yes (0x0015-0x1FFE; dec ) VBI PROCESSING AUDIO INPUT Closed Captions Analog, Unbalanced INPUT INTERFACE 2x RCA (pair L/R) 4x RCA (2x pair L/R) ENCODING FORMAT Dolby Digital AC-3, MPEG-1 Layer II (1) MODES SAMPLING RATE ENCODING BIT RATES Stereo, Mono 48 khz 192, 256, 384 kbps AUDIO PID SETTING Yes (0x0015-0x1FFE; dec ) 6.5 H x 0.75 W x 3.0 D (16.5H x 1.9W x 7.6D cm) 0.33 lbs (0.15 kg) NOTES: (1) DV1CE & DV2CE provide NTSC/Dolby Digital AC-3 encoding (29.97fps); DV1CEM & DV2CEM provide PAL/MPEG-1 Layer II encoding (25fps). Dolby is a registered trademark of Dolby Laboratories. Manufactured under license from Dolby Laboratories. DV1CE / DV1CEM DV2CE / DV2CEM GIGABIT ETHERNET CARD SPECIFICATIONS COPPER PORTS SFP PORTS POWER CONSUMPTION (w/ 4 Active Ports) BIT RATES & STANDARDS RJ45 PORTS SFP PORTS IP OUTPUT CHARACTERISTICS TRANSPORT LAYER STREAMING PROTOCOL NETWORK ENCAPSULATION TRANSMISSION NULL STUFFING DVGIGE 2x RJ45 2x SFP Cage ~ 4W 6.5 H x 0.75 W x 3.0 D (16.5H x 1.9W x 7.6D cm) 0.33 lbs (0.15 kg) 10/100/1000BASE-T & 10/100/1000BASE-TX 1000BASE-LX UDP, RTP Multicast, Unicast DHCP, VLAN Tagging (IEEE 802.1Q) 1-7 TS Packets per Ethernet Frame SPTS, MPTS OFF, ON (User Settable Limit) DVGIGE Page 4 of 7

5 Transmitter Module Specifications TRANSMITTER MODULE SPECIFICATIONS DVFTX DVFTX12 INPUT LEVEL OUTPUT F, 75 Ω 36 dbmv (Single QAM Carrier at MHz) 18 db (min) SC/APC, 4 Ports SC/APC, 1 Port LEVEL 2.5 +/- 1.0 dbm per Port 12 +/- 1.0 dbm per Port 40 db (min) WAVELENGTH User Specified: ch 22 to 46* SBS SUPRESSION MONITOR STATUS AGC POWER NOTE: * See Ordering Information. Up to 20 dbm Front LED Front LED 7.5W (max) 6.2 H x 1.0 W x 7.0 D (15.75H x 2.54W x 17.78D cm) 2.0 lbs (0.9 kg) DVFTX EDFA Module Specifications EDFA MODULE SPECIFICATIONS INPUT LEVEL WAVELENGTH NOISE FIGURE OUTPUT DVF4E (4-Port) SC/APC 2.5 to 7 dbm 40 db (min) nm 6 db (max) DVF1E (1-Port) SC/APC, 4 Ports SC/APC, 1 Port LEVEL TAP (TEST) dbm, User Adjusted via Front Panel, All Ports Simultaneous 40 db (min) SC/APC LEVEL -24 db Relative to Output Ports -30 db Relative to Output Port MONITOR & CONTROL OPTICAL ATTENUATOR ALARM POWER Front Panel Rotary Switch Front LED 19W (max) 6.2 H x 1.0 W x 7.0 D (15.75H x 2.54W x 17.78D cm) 2.0 lbs (0.9 kg) DVF4E DVF1E Page 5 of 7

6 Functional Schematic PLUG-IN ENCODER CARDS ENCODER CARDS 1 OR 2-CHANNEL ENCODER SLOT 1 4 PORT EDFA MODULE #1 OPTICAL OUT #1 OPTICAL OUT #2 OPTICAL OUT #3 OPTICAL OUT #4 TEST POINT TS MULTIPLEXER QAM MODULATOR RF-UPCONVERTER OPTICAL TRANSMITTER MODULE 1 OR 2-CHANNEL ENCODER SLOT 5 FAN #1 4 PORT EDFA MODULE #4 OPTICAL OUT #1 OPTICAL OUT #2 OPTICAL OUT #3 OPTICAL OUT #4 TEST POINT ON/OFF VAC POWER SUPPLY RESET MONITOR & CONTROL REBOOT RJ-45 INTERFACE FAN #4 I.T.E. E RH INPUT INPUT VOLTAGE CURRENT 120 VAC 1.8A 230 VAC 0.9A FREQ 50/60Hz DVISf Page 6 of 7

7 Part Number Optical Outputs Ordering Help Information Tx Module 1 Port EDFA 4 Port EDFA EDFA Modules Max Number of ONTs DVF*E1O^ DVF*E2O^ DVF*E3O^ DVF*E4O^ DVF*E5O^ DVF*E6O^ DVF*E7O^ DVF*E8O^ DVF*E9O^ DVF*E10O^ DVF*E12O^ DVF*E13O^ DVF*E16O^ NOTES: * = Number of Encoders (1,2 10) ^ = Wavelength ( 22,23 46) Ordering Information Part Number DVF*ExO^ Description Optical A/V Insertion Unit with * MPEG-2 SD A/V Baseband Inputs ( * = Number of Inputs, ie. 1, 2, 10), x Optical Outputs (x = 1-10, 12, 13 or 16) and ^ Wavelength (^ = 22, ), includes 19 /23 Universal Mounting Brackets (1 & 2 Output Versions use DVF1E EDFA Module(s)), NTSC/AC-3 Dolby. DVF*ExO^M DVFBASE DV1CE DV1CEM DV2CE DV2CEM DV1HDA DVGIGE DVFTX^ DVFTX12^ DVF1E DVF4E DVFAN DVFPWRSUP Optical A/V Insertion Unit with * MPEG-2 SD A/V Baseband Inputs ( * = Number of Inputs, ie. 1, 2, 10), x Optical Outputs (x = 1-10, 12, 13 or 16) and ^ Wavelength (^ = 22, ), includes 19 /23 Universal Mounting Brackets (1 & 2 Output Versions use DVF1E EDFA Module(s)), PAL/MPEG-1 Layer II. DVISf Base Unit/chassis (no plug-in cards/modules installed). Separate 1-channel MPEG-2 SD Encoder Plug-in Card (1 Video + 2 Audio Inputs), NTSC/AC-3 Dolby. Separate 1-channel MPEG-2 SD Encoder Plug-in Card (1 Video + 2 Audio Inputs), PAL/MPEG-1 Layer II. Separate 2-channel MPEG-2 SD Encoder Plug-in Card (2 Video + 4 Audio Inputs), NTSC/AC-3 Dolby. Separate 2-channel MPEG-2 SD Encoder Plug-in Card (2 Video + 4 Audio Inputs), PAL/MPEG-1 Layer II. Separate 1-channel MPEG-2/H.264 SD/HD Encoder Plug-in Card (Component/VGA). Separate Gigabit Ethernet Output Plug-in Card SFP/RJ45. Optical Transmitter Module for DVISf Base Unit, four 2.5 dbm Output Ports, ^ Wavelength (^ = 22,23 46), SC/APC Connectors. Optical Transmitter Module for DVISf Base Unit, one 12 dbm Output Port, ^ Wavelength (^ = 22,23 46), SC/APC Connector. 1-port EDFA Module with -30 db Tap Port, SC/APC Connectors; 10 to 19 dbm. 4-port EDFA Module with -24 db Tap Port, SC/APC Connectors; 10 to 19 dbm. Replacement/spare Fan for DVISf. Replacement/spare Power Supply for DVISf. NOTE: Dolby is a registered trademark of Dolby Laboratories. Manufactured under license from Dolby Laboratories. MDU Solutions is a registered trademark of ATX in the United States and/or other countries. Products or features contained herein may be covered by one or more U.S. or foreign patents. Dolby and other non-atx product and company names mentioned in this data sheet are the property of their respective companies. Printed in Canada Clements Road West, Ajax, ON L1S 7H4 Canada Tel (905) Toll Free (800) Fax (905) Toll Free Fax (866) support@atxnetworks.com Page 7 of 7 ISO 9001 REGISTERED Rev. 06/16 (ANW0899)