MSDV3203-F4 32"(81cm)HD READY LCD Television

Transcription

1 MSDV3203-F4 32"(8cm)HD READY LCD Television USER MANUAL Please read this User Manual carefully to ensure use of this product and keep this manual for future reference N294

2 CONTENTS SAFETY INSTRUCTIONS...2 INSTALLATION WALL MOUNTING INSTALLATION GUIDLINES...3 ACCESSORIES...4 FRONT PANEL...4 KEY BOARD(RIGHT SIDE)...4 REAR PANEL...4 ANTENNA CONNECTION...5 CONNECTING TO PC...5 PC PRESET...6 CONNECTING TO AV EQUIPMENT...7 REMOTE CONTROL BATTERY INSTALLATION...8 KEYS FUNCTION...8 OPERATION... 9 BASIC OPERATION...9 TELETEXT...9 EPG... MENU OPERATION... TROUBLESHOOTINGS...4 TECHNICAL SPECIFICATION

3 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTION.Read these safety instructions. 2.Keep these safety instructions. 3.Heed all warnings. 4.Follow all safety instructions. 5.Do not use this apparatus near water. 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8.Do not install near any heat sources such as radiators, stoves, or other apparatus (including amplifiers)that produce heat. 9.Protect the power cord from being walked on or pinched particularly at power outlets, and the point where they exit from the apparatus. 0.Only use attachments/accessories specified by the manufacturer..unplug this apparatus during lightning storms or when unused for long periods of time. 2.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 3.Apparatus must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN! CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit. The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture. Thank you very much for purchasing this TV. To enjoy your product from the very beginning, read this manual carefully and keep it handy for easy reference. INSTALLATION Locate the TV in the room where light does not strike the screen directly. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the TV and the wall to permit ventilation. Avoid extremely warm locations to prevent possible damage to the cabinet or premature component failure. This TV can be connected to AC Volts. 50/60 Hz. Never connect to a DC supply or any other power supply. Do not cover the ventilation openings when using the TV. CAUTION Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual. All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be performed by qualified TV service personnel. Warning: Change or modifications to this unit not expressly by the part responsible for compliance could void the user 's authority to operate the Equipment. a. Do not expose to dripping or splashing. b. No objects filled with liquids, such as vases, shall be placed on the apparatus. c. The mains plug of this device is used as the disconnect device and shall remain readily accessible and operable. d. No naked flame sources, such as lighted candles, should be placed on the apparatus. e. Allow suitable distances around the apparatus for sufficient ventilation. Ventilation should not be impeded by covering ventilation openings with items such as newspapers, table cloths, curtains and such like. This symbol indicates that this productincorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or cords. -2-

4 Dim:55*320mm( INSTALLATION High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls. To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture. Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it falls. Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet. Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components. Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on the television. Do not trap the power supply cord under the television receiver. If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous. -3-

5 VOL _ + CH _ INSTALLATION Front panel KEYBOARD SOURCE MENU CH CH- VOL+ VOL : Remote control sensor. 2: Indicator LED: GREEN POWER ON. RED STANDBY. 3: Key board 4: Power: Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY. 5: AC power switch. REAR AV Connection SOURCE Display the input source menu. 2 MENU Display main MENU. 3 CH+/CH- In TV mode press CH+ or CH- to change the channel up and down. In MENU mode, press CH+ or CH- to select items. In standby mode, press CH+ or CH- to turn on the TV. 4 VOL+/VOL- Adjust sound level. In MENU mode, press VOL+ or VOL- to adjust the item that you selected ANT 2. AUDIO OUTPUT 3. SPDIF OUTPUT 4. VIDEO OUTPUT 5. AV/S-VIDEO AUDIO INPUT 6. YPbPr AUDIO INPUT 7. PC AUDIO INPUT 8. YPbPr INPUT 9. AV INPUT 0. S-VIDEO INPUT. VGA INPUT 2. HDMI2 INPUT 3. HDMI INPUT 4. AC POWER INPUT NOTE:.AV and S-VIDEO share one audio channel. 2.When HDMI port get DVI signal, the PC Audio channel will change to receive the audio from HDMI port 3.When HDMI2 port get DVI signal, the YPbPr Audio channel will change to receive the audio from HDMI2 port. 4.AV OUTPUT It works only at input sources: TV,DTV,S-Video,S-Video2,AV,AV2.

6 INSTALLATION ANTENNA CONNECTION Note: Aerial connections:iec(female). Input impendance:75 unbalanced. -5-

7 2 INSTALLATION CONNECTING TO PC STEPS: Be sure both the TV and computer are set to Power off..connect VGA and audio cable. 2.Connect the power cord. 3.Power on the TV, switch the input source to VGA mode. 4.Power on the PC. This sequence is very important. 8 VGA cable Power cord PC Audio -6-

8 R Y W R Y W W R R W R Y R Y 2 Y INSTALLATION CONNECTING TO AV EQUIPMENTS This TV provides two groups of AV,two S-Video,one group of YPbPr for convenient connection to VCR,DVD or other video equipment,three group of HDMI for HD signal input Please refer to the owner s manual of the equipment to be connected as well. You can use the input terminals on TV set rear as follows. with S-video Terminal W To au dio outputs VIDEO EQUIPMENT with YPbPr with SPDIF Input terminal From Coaxial SPDIF output VIDEO EQUIPMENT Y Black (s-video) To s-video output R Pr G Y B Pb G B R W R VIDEO RECORDER W White(audol L) R Red(audio R) R B G With VIDEO Input Terminal W R Y TO VIDEO Iutput To audio Input HDMI With VIDEO terminal W To audio Output VIDEO EQUIPMENT To video output HEADPHONE S-VIDEO2 VIDEO AV2 L R HDMI HDMI3 It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc... YPbPr can support these video fomats:480i,576i,480p,576p,720p,080i,080p. NOTE: AV2 and S-VIDEO2 share the audio input channel. When HDMI3 port get DVI signal, the AV2 Audio channel will change to receive the audio from HDMI3 port -7-

9 REMOTE CONTROL KEYS FUNCTION POWER TV MENU + VOL _ OK MUTE AUDIO RECALL SOURCE CH.LIST SOUND EXIT FREEZE SLEEP PIC TV/RADIO ASPECT TEXT EPG FAV INFO + CH _ REVEAL HOLD LIST INDEX SUBPAGE SIZE MIX SUBTITLE Insert Batteries Into the Remote Control 2 3. Remove the battery cover. 2. Inserting the 2 AAA.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit. 3. Mount the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit. Remark: ) Alkaline Battery Recommended. 2) Remove batteries when they are exhausted or if the remote control is not to be used for long time : POWER:To set the TV to standby or power on. 2: NUMERIC KEY: For direct access to channels. 3: TV MENU:To display TV menu. 4: CURSOR:To move within the menu. 5: CH.LIST:To display the channels list. 6: VOL+/- :To adjust sound level. 7: PIC:To switch picture mode. 8: SLEEP:SettimertoturnofftheTV. 9: FREEZE : To freeze the picture. 0: EPG:To display information about the program being viewed and what's on Next indtv mode. : FAV:To access your favourite channels list in TV or DTV mode. 2: TELETEXT KEYS: See page 4. 3: MUTE:To disable or enable the sound output. 4: AUDIO:To select the available audio language of TV programs or select sound channel. 5: RECALL: To access the previously viewed channel. 6: SOURCE: To select input source. 7: OK:To confirm selection. 8: EXIT: To exit the menu. 9: SOUND:To switch sound mode. 20: CH+/CH-:To access the next or previous channels. 2: ASPECT: To change picture aspect ratio. 22: TV/RADIO:In DTV mode, it is used to switch between digital TV channels and radio stations. 23: TEXT:To enter or exit TELETEXT. 24: INFO:To display information about the channel being viewed or further information about the program when in small EPG screen in DTV mode. 25: SUBTITLE:To switch betweend ifferent subtitles in DTV mode. -8-

10 OPERATION BASIC OPERATION TURN ON THE UINT Press the POWER button on the remote control to switch on the power. The power indicator will light up in green colour, press the POWER button again to switch off the power, and the indicator will change to red. CHANNEL SEARCH Press the SOURCE button on the remote control to select the TV or DTV input mode, and press the OK button to confirm.if you are using the unit for the first time, an Installation Guide menu will be displayed to guide you through the channel scan,use the remote control to finish channel scan (you can also refer to CHANNEL MENU (page ) in this manual for the channel scan operation). NEW INSTALLATION Menu Language Auto Tuning English WATCH TV PROGRAM Press the CH- or CH+ button to select the previous or next channels or press the 0-9 buttons to enter a channel number directly.press CH.LIST button to view the channels list and press the buttons to select the desired TV programmes. CHANGE VOLUME Press the VOL - or VOL + button to adjust the volume level. Press the VOL - button repeatedly to decrease the volume; press the VOL + button repeatedly to increase the volume from 0 to 00. CHANGE PICTURE MODE Press the PIC button repeatedly to cycle through the available video picture modes. CHANGE SOUND MODE Press the SOUND button repeatedly to cycle through the available sound modes. VIEW CHANNEL INFORMATION Press the INFO button to display the preset channel information. MUTE Press the MUTE button to cut off the sound output, press this button again to resume sound output. CHANGE INPUT SOURCE Press the SOURCE button then press the buttons to select the input source and press the OK button to confirm. -9-

11 OPERATION TELETEXT Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.) Press: T EXT You Will obtain: This is used to enter or exit teletext mode. The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number. If the channel selected does not broadcast teletext, the indication 00 will be displayed and the screen will remain blank (in this case, exit teletext and select another channel). SELECTING A PAGE Enter the number of the page required using the 0 to 9 up/down. Example: page 20, enter 20. The number is displayed top left, the counter turns and then the page is displayed. Repeat this operation to view another page. If the counter continues to search, this means that the page is not transmitted. Select another number. DIRECT ACCESS TO THE ITEMS Coloured icons are displayed at the bottom of the screen. The 4 coloured buttons on the remote control are used to access the items or corresponding pages. The coloured icons flash when the item or the page is not yet available. INDEX SUB PAGE HOLD REVEAL This returns to the contents page (usually page 00). Certain pages contain subpages which are automatically displayed successively. This key is used to stop or resume sub-page acquisition. The indication appears top left. To freeze the page. To display or hide the concealed information (games solutions). SIZE To zoom the page. LIST To save and display your favourite pages. MIX To mix teletext with video pictures. -0-

12 Schedule OPERATION EPG (Electronic Programme Guide) The EPG (Electronic Programme Guide) menu is used to look at what is being broadcast on a DTV or Radio channel at a later point in time. Press the EPG button to access the EPG menu, the detailed programme information of the channel currently being viewed will be displayed. PROGRAMME GUIDE DTV 80 France 4 20 Feb : Last Exit DTV 800 France 2 80 France France ARTE 804 LCP 805 France 3 20 Feb 6:00 7:00 Information Last Exit Movie Programme 2 Programme 3 Programme 4 Programme 5 EXIT INFO DATE Reminder OK To see what is going to be broadcast after the current programme, press the button to view future programmes and press the button to return towards the programmes televised at the current time. To view a different channel, press the or button. To book a wanted programme for later watching, press the blue button to enter Reminder menu. Press the green button to enter the schedule list. To exit the EPG menu and watch the selected channel, press the EPG or EXIT button. ).Auto Tuning: Search all the channels automatically (ATV, DTV & Radio) Country selection Start Please select country first then select Start to update info Australia Cancel Press the buttons to select country then press the buttons to select start or cancel. Press the OK button to start or exit auto tuning. NOTE: All the channels including ATV, DTV and Radio can be tuned at the one time. 2).DTV Manual Tuning: You can select a DTV channel then find the program in this channel DTV Manual Tuning UHF CH 30 Please select channel then pressoktosearch Bad Nomal Good MENU OPERATION EXIT OK MENU.CHANNEL MENU The first item of the menu is CHANNEL menu( for TV source only). CHANNEL Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit You can search channels and edit programs here. Pls press the buttons to select the channel, then press the OK button to search the programs. NOTE: Bad Normal Good refers to the signal intensity. 3). ATV Manual Tuning :You can change the sound system to search the analog TV channels and fine tune the channels, then store the channels you selected. ATV Manual Tuning Storage To System BG Current CH Search Fine-Tune Skip Yes Frequency MHz EXIT SAVE --

13 OPERATION Storage To: To select the channel number you want to save to. System: To select the TV sound system. Current CH: To select the current channel. Search: To search backward/forward. Fine-Tune: To fine tuning when the signal level of current channel is weak. Skip: When it set to Yes, the current channel will be skipped while you are changing channels by pressing the CH+ or CH- buttons. Press the red button to store the channel after manual tuning. 4). Programme Edit: You can edit programs in the following items. Delete Press the red button, it will shows a red delete cursor. Press the buttons to choose the program. Press the red button again, the program will be deleted. Rename You can only rename ATV programs. Move the cursor to the program, press the green button to rename the program. Press the TV MENU button to exit edit, Press the EXIT button to exit the menu. Move Move the cursor to the program, press the yellow button, it will show a yellow cursor, Press the buttons to move the program. Skip Press the buttons to choose the program, then press the blue button to skip this program, the SKIP icon will show on the right side of the program. Choose the skipped program and press the blue button again to cancel skip, the SKIP icon will disappear. FAV Press the buttons to choose the program, press the FAV button, it will show on the right side of the program.choose the FAV program and press the FAV button again to cancel FAV, the icon will disappear. Once your favourite group is created,you can press the FAV button to quickly access your favourite channel list. 2. PICTURE MENU The second item of the menu is PICTURE menu. You can adjust picture effect here, including contrast, brightness and colour as well as other picture functions. Press the buttons to select items and press the buttons to adjust. Picture Mode Contrast Brightness Colour Sharpness Tint PC Setup PICTURE () PICTURE PICTURE (3) Dynamic Colour Temp Normal Red Green Blue Aspect Ratio 6:9 Noise Reduction ON Auto Adjust H-Position V-Position Clock Phase (2) PICTURE 0 NOTE: (4) ).Tint is available in NTSC system only. 2).PC Setup is available in VGA mode only. -2-

14 OPERATION 3.SOUND MENU The third item of the menu is the SOUND menu. You can adjust the sound effect here, including treble, bass and balance as well as other sound functions. Press the buttons to select and press the buttons to adjust. 6.LOCK MENU ThesixthitemofthemenuistheLOCKmenu. You can lock system, set password, block program, set parental guidance, restore factory default and set maximum volume control. LOCK SOUND Sound Mode Treble Bass Balance Surround Sound Standard Off Lock System Off Change Password Block Programme Parental Guidance Off Restore Factory Default Max Volume 00 4.TIME MENU The forth item of the menu is the TIME menu. You can adjust the clock, power on/off time, sleep timer and time zone as well as other time clock functions. Press the buttons to select and press the buttons to adjust. TIME Clock Off Time Off On Time Off Sleep Timer Off Auto Sleep Off Time Zone New South Wales GMT +0 Time Zone: Press the buttons to adjust the Time Zone. NOTE: When the Auto Sleep is set to ON, the unit will turn to standby mode automatically if there is no signal input for a period of about 5 minutes. 5.DEFAULT MENU The fifth item of the MENU is the DEFAULT menu. Note: ). Menu Language, Audio Language, Subtitle Language are optional. DEFAULT Menu Language Audio Language Subtitle Language Hearing impaired Country English English English Off Australia To enter the LOCK menu, password will be requested, the default password is The master password is 9527 and may be entered if the user set password is lost or forgotten (in order to program a new password). Please note this master over-ride password does not change and therefore should not be given to people you do not wish to allow access to your locked settings.. The super password cannot be erased, it will always remain operational 2. If you forget the password, enter the super password. And then modify your password, enter the new password twice to confirm that success. LOCK System: Press the buttons to turn ON or OFF. If it is set to ON, you will be asked to enter password when searching the channels. Change Password: Press the or OK button and enter the new password. Block Programme: Press the or OK button to enter the program list. Press the buttons to select the channel you want to lock then press the green button to lock, the lock icon will appear behind the locked channel. To unlock the channel, select the locked channel and press the green button again,the lock icon will disappear. Parental Guidance: Press the buttons to set the program rating to block some programs. Note: ). Parental Guidance is optional. Restore Factory Default: Press the or OK button to restore, this operation will reset the unit to factory default and all the settings and stored channels will be cleared. Max Volume: Press the buttons to set the maximum volume. Note: ). Max Volume is optional. -3-

15 TROUBLESHOOTING Picture Problem Audio Check Snow Noise antenna position, direction or connection Ghost Normal audio antenna position, direction or connection Interference Noise electronic equipment,car/ motorcycle,fluorescent light Normal Picture Mute Volume(check if mute is activated or if the audio system connections are not correct) No picture Mute Power cord is not inserted Power switch is not opened Contrast and brightness/volume setup Press standby key on the remote control for inspecting No colour Normal audio Colour control Picture breaking up Normal audio or weak Retune channel No colour Noise TV system -4-

16 TECHNICAL SPECIFICATIONS LCD : Viewing Picture Size(diagonal) Resolution Aspect Ratio Display colours Brightness Contrast ratio Response time Viewing angle TV: TV system DVB-T decode DVB-T de-modulation Terminals: Analog RGB(VGA) Input Rear HDMI Input Side HDMI Input Rear Composite Video Input Rear S-Video Input Rear Audio Input Y Cb(Pb) Cr(Pr) Input Side Composite Video Input Side S-Video Input Side HEAD PHONE Output Rear Composite Video Output Analog Audio Output Coaxial SPDIF Output Others: Input Power Voltage Power consumption Audio Output Power THD 7% ) 3.5 (80cm) 366x768 6:9 6.7M 500 CD/M 500: 6.5 ms 76(H)/76(V) Digital TV: DVB-T Analog TV: PAL/SECAM Audio: MPEG2 Audio Layer I&II Video: MPEG2 Transport MP@HL Demodulator : COFDM OFDM Mod.: 2K, 8K FFT, SFN and MFN Packed Carries: 2K/8K Guard Interval: /4, /8, /6, / V-240V~ 50/60Hz W 2x8W 2-5-

17