PT-D5600/D5600L S P E C F I L E. DLP -Based Projectors. As of May Specifications subject to change without notice. < 1 > Product Number :

Transcription

1 The PTD5600L is not equipped with a lens. Product Number : Product Name : PTD5600/D5600L DLP Based Projectors As of May Specifications subject to change without notice. < 1 >

2 DLP Based Projectors PTD5600/D5600L Specifications Main Unit Power supply: Power consumption: DMD device: Lens: Lamp: Screen size: Brightness : Centertocorner uniformity: Contrast: Resolution: Scanning frequency: Optical axis shift: North America: Europe: North America: Europe: Panel size: Display method: Pixels: PTD5600: PTD5600L: RGB: Video: RGB: YPBPR (YCBCR): SVideo/Video: Keystone correction range: Installation: Terminals: DVID IN: Onscreen menu: Noise: EDID 1 EDID 2 RGB 1 IN: R, G, B: Y, PB, PR: RGB 2 IN: R, G, B: Y, PB, PR: VIDEO IN: SVIDEO IN: SERIAL IN: SERIAL OUT: REMOTE 1 IN: REMOTE 1 OUT: REMOTE 2 IN: LAN: 120 V AC, 50/60 Hz V AC, 50/60 Hz 770 W (770 VA) (10 W during standby mode with fan stopped) 750 W (790 VA) (15 W during standby mode with fan stopped) 0.7 diagonal (4:3 aspect ratio) DMD x 1, DLP system 786,432 (1,024 x 768) x 1, total of 786,432 pixels Powered zoom/focus lenses (1:1.8 1:2.5), F , f mm Optional poweredzoom/focus lenses 300 W UHM lamps (x 2) (dual lamp system) inches 5,000 lumens (dual lamp, high power mode) 90% 2,000:1 (full on/full off, contrast mode: high) 1,000:1 (full on/full off, contrast mode: normal) 1,024 x 768 pixels (1,600 x 1,200 pixels compatible, compression mode) 560 TV lines Horizontal: khz, Vertical: Hz, Dot clock: 108 MHz or lower 480i: fh khz; fv 60 Hz, 576i: fh khz; fv 50 Hz, 480p: fh 31.5 khz; fv 60 Hz, 576p: fh khz; fv 50 Hz, 720/60p: fh 45 khz; fv 60 Hz, 720/50p: fh 37.5 khz; fv 50 Hz, 1035/60i: fh khz; fv 60 Hz, 1080/60i: fh khz; fv 60 Hz, 1080/50i: fh khz; fv 50 Hz Horizontal: 15.75/15.63 khz, Vertical: 50/60 Hz, (NTSC, NTSC4.43, PAL, PAL60, PALN, PALM, SECAM) Horizontal (manual) and vertical (powered), horizontal: ±10% (6:4 4:6), vertical: 0 50% (0:10 10:10) Vertical: ±30 (with standard lens) Ceiling/floor, front/rear DVID 24pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i For noninterlaced s only, Display mode: From VGA (640 x 480) to SXGA (1,280 x 1,024), Dot clock: 25 MHz 108 MHz B x 5 G: 0.7 Vpp (G: 1.0 Vpp for sync on G), 75Ω, B, R: 0.7 Vpp, 75Ω HD/VD, SY: 1.4 Vpp 5.0 Vpp, 75Ω (positive/negative) Y: 1.0 pp, 75Ω, PB/PR: 0.7 Vpp, 75Ω Dsub HD 15pin x 1 G: 0.7 Vpp (G: 1.0 Vpp for sync on G), 75Ω, B, R: 0.7 Vpp, 75Ω HD/VD, SY: 1.4 Vpp 5.0 Vpp, 75Ω (positive/negative) Y: 1.0 pp, 75Ω, PB,/PR: 0.7 Vpp, 75Ω B x 1, 1.0 Vpp, 75Ω Mini DIN 4pin x 1, Y: 1.0 Vpp, C: Vpp, 75Ω Dsub 9pin x 1 (RS232C compliant) for external controller Dsub 9pin x 1 (RS232C compliant) for external controller M3 jack x 1 for wired remote control or link control M3 jack x 1 for link control Dsub 9pin x 1 for external control (parallel) RJ45 x 1, compliant with PJLink, 10BaseT/100BaseTX 9 languages: English, French, German, Spanish, Italian, Russian, Korean, Chinese, and Japanese 35 db (high lamp power mode), 29 db (low lamp power mode) As of May 2006 < 2>

3 DLP Based Projectors PTD5600/D5600L Power cord length: Dimensions (W x H x D): Weight: Operating temperature: Operating humidity: PTD5600 PTD5600L 3.0 m (9.9 ) 530 x 167 x 429 mm (207/8 x 69/16 x 167/8 ) (without lens) 14.5 kg (32.0 lbs) (with supplied lens) 13.7 kg (30.2 lbs) (without lens) 0 45 C ( F) 20% 80% (no condensation) Remote Control Unit Power supply: Operation range*: Dimensions (W x H x D): Weight: Supplied Accessories Wireless: Wired: 3 V DC (AAA battery x 2) Approx. 7 m when operated from directly in front of the receptor Approx. 15 m 45 x145 x 24.5 mm (13/4 x 511/16 x 15/16 ) Approx. 115 g (4.9 oz.) (including batteries) Power cord, Wireless/wired remote control unit, Batteries for remote control (x 2) Optional Accessories Replacement lamp unit: Replacement longlife lamp unit: Ceiling mount bracket: (1.31.8:1) (2.54.0:1) (3.75.7:1) (3.44.5:1) (5.78.0:1) (4.58.4:1) Fixedfocus lens (0.8:1) Wireless mouse receiver ETLAD55 (1 unit) ETLAD55W (set of two lamps) ETLAD55L (1 unit) ETLAD55LW (set of two lamps) ETPKD56H (for high ceilings) ETPKD55S (for low ceilings) ETDLE100 ETDLE200 ETDLE300 ETDLE310 ETDLE400 ETDLE410 ETDLE050 ETRMRC2 *Operation range differs depending on environments. Weights and dimensions shown are approximate. Specifications subject to change without notice. Dimensions 429 [167/8] 425 [1623/32] unit : mm (inch) NOTE: This illustration is not drawn to scale. The illustration shows the PTD5600L. 529 [2013/16] [207/8] 167 [69/16] [525/32] 81 [33/16] 11.6 [15/32] As of May 2006 < 3>

4 DLP Based Projectors PTD5600/D5600L Terminals Video input 2 SVideo input 3 RGB 1 input 4 RGB 2 Input 5 DVID input 6 LAN connector 7 Remote 1 input and output 8 Remote 2 input 9 Serial input 10 Serial output RGB IN connector pin assignment 1 R/PR G/Y B/PB 8 13 HD/SY VD DVID output connector pin assignment 1 T, M, D, S data 2 9 T, M, D, S data 1 17 T, M, D, S data 0 2 T, M, D, S data T, M, D, S data T, M, D, S data 0+ 3 T, M, D, S data 2 shield 11 T, M, D, S data 1 shield 19 T, M, D, S data 0 shield DDC clock V 22 T, M, D, S clock shield 7 DDC clock T, M, D, S clock Hot plug detection 24 T, M, D, S clock As of May 2006 < 4>

5 DLP Based Projectors PTD5600/D5600L Standard settingup positions H Upper edge of projected image Projected image L 180* (73/32 ) (109/32 ) * 2 (1613/32 211/8 ) 76.5 (3 ) *1 When the lens protrudes to the maximum. 172 mm (625/32 ) with the ETDLE mm (81/32 ) with the ETDLE mm (8 ) with the ETDLE mm (717/32 ) with the ETDLE mm (717/32 ) with the ETDLE400 *2 Adjustable in 40 mm (19/16 ) steps. L H Lower edge of projected image unit : mm (inch) L 157 (63/16 ) NOTE: Projected image Illustrations show the projector installed using optional ceiling bracket. This illustration is not drawn to scale (37/16 ) Projection distance (screen aspect ratio 4:3) (meters) Screen size (inch, diagonal) ETDLE100 ( :1) ( :1) ETDLE200 ( :1) min. max. min. max. min. max. ETDLE300 ( :1) ETDLE310 ( :1) ETDLE400 ( :1) ETDLE410 ( :1) min. max. min. max. min. max. min. max. ETDLE050 Fixedfocus lens (0.8:1) As of May 2006 < 5>

6 DLP Based Projectors PTD5600/D5600L Projection distance (screen aspect ratio 4:3) (feet) Screen size (inch, diagonal) ETDLE100 ( :1) ( :1) ETDLE200 ( :1) min. max. min. max. min. max. ETDLE300 ( :1) ETDLE310 ( :1) ETDLE400 ( :1) ETDLE410 ( :1) min. max. min. max. min. max. min. max. ETDLE050 Fixedfocus lens (0.8:1) Projection distance (screen aspect ratio 16:9) (meters) Screen size (inch, diagonal) ETDLE100 ( :1) ( :1) ETDLE200 ( :1) min. max. min. max. min. max. ETDLE300 ( :1) ETDLE310 ( :1) ETDLE400 ( :1) ETDLE410 ( :1) min. max. min. max. min. max. min. max. ETDLE050 Fixedfocus lens (0.8:1) As of May 2006 < 6>

7 DLP Based Projectors PTD5600/D5600L Projection distance (screen aspect ratio 16:9) (feet) Screen size (inch, diagonal) ETDLE100 ( :1) ( :1) ETDLE200 ( :1) min. max. min. max. min. max. ETDLE300 ( :1) ETDLE310 ( :1) ETDLE400 ( :1) ETDLE410 ( :1) min. max. min. max. min. max. min. max. ETDLE050 Fixedfocus lens (0.8:1) Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance. ETDLE100 ETDLE200 ETDLE300 ETDLE310 ETDLE400 ETDLE410 ETDLE050 4 : 3 minimuml (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 9 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 3 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 9 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 3 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 9 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 3 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 9 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 3 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 9 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 3 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 9 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 3 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 9 minimum L (m) = (diagonal screen size in inches) x maximum L (m) = (diagonal screen size in inches) x : 3 (fixed focus) L (m) = (diagonal screen size in inches) x : 9 (fixed focus) L (m) = (diagonal screen size in inches) x As of May 2006 < 7>

8 DLP Based Projectors PTD5600/D5600L Notes on Projector Placement and Operation: The projector uses a highwattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 500 mm or more around the projector s exhaust openings. 3. Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated below between them. These space requirements also apply to installations where only one projector unit is operating at one time and the other unit is used as a backup. 4. If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the projector is between 0 C and 35 C. Also make sure the projector s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings. Operating the Projector Continuously: 1. If the projector is to be operated continuously 24 hours a day, use the duallamp optical system s alternating lamp operation (lamp changer) function. The projector cannot be operated continuously 24 hours a day in duallamp mode. Allow a minimum of two hours per day of nonoperation time. 2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. As of May 2006 < 8>