Input Control. Input Voltage Range. Model. 2 Vin - 0.2~0.5V % SLD-DimTW V 2 2 Vin - 0.2~0.5V 5. 7 SLD-DimTW

Transcription

1 Model Input Voltage Range Input Control SLD-DimTW 8-48 V 1 2 Vin -.2~.5V % 8-48 V 2 2 Vin -.2~.5V % 7 SLD-DimTW -2175

2 Voltage Range Please refer model table Input Current 5.1A max (per channel) Control Voltage /1-1VDC Dimmer * wires should have the capability to sink a min. of 1mA for multiple 2mA is recommended for a single module Control Range -%v 1V = % light output 1V =% light output Short Circuit Protection Hiccup-Mode, Auto-Recovery upon removal of short circuit condition. Over Voltage Auto Recovery upon input voltage under Vin (max) Over Temperature Protection Auto recovery upon operating temperature <15 C Under voltage Logout Auto Recovery upon input voltage over Vin (min) Output Frequency 1kHz PWM Output Current 5A max. at full load ** 97% Typ Dimming Ratio 1: ** - SLD-DIM dimming module max. output current is dependent on LED driver output current, which should not exceed the Class 2 maximum of 5A or. Ambient Temperature Storage Temp Relative Humidity - 2 C - 6 C (Full Load) - 4 C - 85 C 5% - 95 % Compliance / Safety Safety Standards: UL875,UL879, Weatherability: IP 65 Power Unit Dimensions Case Design/Material Wire Length Wire Size mm (L) x 44mm (W) x 14.5mm (H) 6 inches 152.4mm a. 18AWG standard, 3V, 15deg C (DC input and Dim Output wires) b.22awg standard, 3V, 15deg C(/1-1V control wires) INPUT OUTPUT (Standard) CONTROL INPUT

3 Performance Curve 12 Derating Curve Dimming Curve SLD-DimTW Load (%) Dimming Level (%) Warm Cool Operating Temperature ( C) Input (V) 1 Dimming Curve Color Temperature (/1-1V Control 1) (/1-1V Control 2) Dimming Level (%) Intensity Dimming Level (%) Warm Cool Input1 (V) 1 Input2 (V) 1 SLD-DimTW_2175

4 Mechanical Diagram SLD-DimTW Black (Vin1-) (Vin1+) Yellow (Warm +) Blue (Warm -) Blue (Cool -) Yellow (Cool +) (Vin2 +) Black (Vin2 -) Input Wire Black Vin1 - Vin2 - Output Wire Yellow Warm + Yellow Cool + Blue Warm - Blue Cool - Control Wire Purple to /1-1V Control Gray to /1-1V Control Packing Information.96 kg/pcs, pcs/carton; 11.6 kg /carton; L27xW22xH43 (mm)

5 Mechanical Diagram Black (Vin 1 -) (Vin 1 +) Yellow (Warm +) Blue (Warm -) Blue (Cool +) Yellow (Cool +) (Vin 2 +) Black (Vin 2 -) 22#AWG Gray (Control 1) 22#AWG Purple (Control 1) 22#AWG Purple (Control 2) 22#AWG Gray (Control 2) Input Wire Black Vin1 - Vin2 - Packing Information.1 kg/pcs ; pcs/carton; 12. kg /carton; L27xW22xH43 (mm) Output Wire Yellow Warm + Yellow Cool + Blue Warm - Blue Cool - Control Wire Purple to /1-1V Control 1 Gray to /1-1V Control 1 Purple to /1-1V Control 2 Gray to /1-1V Control 2

6 Wiring Diagrams imtw Driver DC Out Warm white Warm+ L N GND SLD/XLD/GLV Series Class 2 LED Drivers ( 48V, 5A per Channel ) OR Any Class 2, CV Driver ( 48V, 5A max ) (Dual channel or two separate drivers) SLD-DimTW Vin1+ Vin1- Vin2+ Vin2- Warm- Cool+ Cool- Cool Daylight Purple + Gray - Customer Supplied Dimming Devices Options: a) /1-1V Electronic Dimmer Control from Levitron, Lutron, Hunt, etc. b) Adjustable DC Source (e.g. DC Power supply or -1V Control System) * -% flicker-free performance not guaranteed when used with non-gre Alpha CV Drivers SLD-DimTW_2175

7 Wiring Diagrams Driver DC Out Warm white Warm+ L N GND SLD/XLD/GLV Series Class 2 LED Drivers ( 48V, 5A per Channel ) OR Any Class 2, CV Driver ( 48V, 5A max ) (Dual channel or two separate drivers) Vin1+ Vin1- Vin2+ Vin2- Warm- Cool+ Cool- Cool Daylight Purple 1 + Gray 1 - Purple 2 + Gray 2 - Customer Supplied Dimming Devices Options: Control 1 for intensity Control 2 for color temperature a) /1-1V Electronic Dimmer Control from Levitron, Lutron, Hunt, etc. b) Adjustable DC Source (e.g. DC Power supply or -1V Control System) * -% flicker-free performance not guaranteed when used with non-gre Alpha CV Drivers Information furnished is believed to be accurate and reliable. However, GRE Alpha assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by without notice. This publication supersedes and replaces all information previously supplied. The GRE Alpha logo is a registered trademark of GRE Alpha Electronics Ltd. All other names are the property of their respective owners