IKS PoE Series. 24+2G-port Gigabit modular PoE managed Ethernet switches. Introduction. Specifications

Transcription

1 STAT PWR PWR RING PORT PORT M M M PoE 6 5 PoE IKS-66 Industrial Ethernet Solutions IKS-66-PoE Series +G-port Gigabit modular PoE managed Ethernet switches Supports a total of 0 W by smart PoE power management Meets UL and EN 50- certifications Turbo Ring, Turbo Chain, RSTP/STP, and MSTP* for network redundancy TACACS+*, SNMPv, IEEE 0.X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI*, Telnet/serial console, Windows utility, and ABC-0 Modular design lets you choose from a variety of media combinations -0 to 5 C operating temperature range *Available in Q, 0 Introduction The IKS-66-PoE series of industrial rackmount Ethernet switches are designed to meet the demands of mission critical applications for business and industry, such as power automation and critical facility surveillance. The IKS-66-PoE comes standard with 0/00BaseT(X) ports and 0/00BaseT(X) 0.af (PoE) compliant Ethernet ports. The IKS-66-PoE Ethernet switches provide two kinds of power input source: VDC and 0/0 VDC/VAC. The IKS-66-PoE supports a total of 0 W PoE power supply. With a limit of 0 W, the IKS-66-PoE models can supply power to up Features and Benefits Advanced PoE management function IEEE 0.af-compliant PoE and Ethernet combo ports Command Line (CLI) for quickly configuring major managed functions* IPv6 Ready logo awarded (IPv6 Logo Committee certified) IEEE 5 PTP V* (Precision Time Protocol) for precise time synchronization of networks DHCP Option for IP address assignment with different policies Support EtherNet/IP* and Modbus/TCP protocols for device management and monitoring Compatible with EtherNet/IP and PROFINET protocols for transparent data transmission Turbo Ring and Turbo Chain (recovery time < 0 ms), RSTP/STP, and MSTP* for network redundancy IGMP snooping and GMRP for filtering multicast traffic Specifications Technology Standards: IEEE 0.af for Power-over-Ethernet IEEE 0. for 0BaseT IEEE 0.u for 00BaseT(X) and 00BaseFX IEEE 0.ab for 000BaseT(X) IEEE 0.z for 000BaseX IEEE 0.x for Flow Control IEEE 0.D-00 for Spanning Tree Protocol* IEEE 0.w for Rapid STP to 6 PoE ports. The switches support advanced management and security features, and are designed especially for security automation applications such as IP surveillance and gate of entry systems, which can benefit from a scalable backbone construction and Power-over- Ethernet support. In addition, the modular design of the IKS-66- PoE makes network planning easy, and allows greater flexibility by letting you install up to 6 PoE ports, Gigabit ports, and fast Ethernet ports. Port-based VLAN, IEEE 0.Q VLAN, and GVRP to ease network planning QoS (IEEE 0.p/Q and TOS/DiffServ) to increase determinism IEEE 0.ad, LACP for optimum bandwidth utilization TACACS+*, SNMPv, IEEE 0.X, HTTPS, and SSH to enhance network security SNMPv/vc/v for different levels of network management RMON for efficient network monitoring and proactive capability Bandwidth management to prevent unpredictable network status with Lock port to restrict access to authorized MAC addresses Port mirroring for online debugging Automatic warning by exception through , relay output Automatic recovery of connected device s IP addresses Line-swap fast recovery Configurable by Web browser, Telnet/serial console, CLI*, Windows utility, and ABC-0 automatic backup configurator *Available in Q, 0 IKS-66-PoE Modular Rackmount Ethernet Switch System Slot Slot info@moxa.com

2 IEEE 0.s for Multiple Spanning Tree Protocol* IEEE 0.Q for VLAN Tagging IEEE 0.p for Class of Service IEEE 0.X for Authentication IEEE 0.ad for Port Trunk with LACP Protocols: IGMPv/v, GMRP, GVRP, SNMPv/vc/v, DHCP Server/ Client, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, DHCP Option 66/6/, EtherNet/IP*, Modbus/ TCP, LLDP, IEEE 5 PTP V*, IPv6, NTP Server/Client* MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group,,, 9 Flow Control: IEEE 0.x flow control, back pressure flow control *Available in Q, 0 Switch Properties Priority Queues: Max. Number of Available VLANs: 6 VLAN ID Range: VID to 09 IGMP Groups: 56 MAC Table Size: K Packet Buffer Size: Mbit Fast Ethernet: Slot for any combination of, 6,, or -port PM-00 fast Ethernet modules with 0/00BaseT(X) (TP/PoE/ interface), 00BaseFX (SC/ST connector), or 00BaseSFP Gigabit Ethernet: Slot for -port PM-00 Gigabit Ethernet combo module with 0/00/000BaseT(X) or 000BaseSFP ports Note: See page - for PM-00 Gigabit and fast Ethernet module product information. Console Port: RS- (RJ5 connector) System LED Indicators: STAT, PWR, PWR, FAULT, MSTR/HEAD, CPLR/TAIL Mode LED Indicators: LNK/ACT, FDX/HDX, RING PORT, PORT, SPEED, PoE on module Alarm Contact: relay output with current carrying capacity of 0 VDC or 0 VAC Power Requirements Input Voltage: VDC ( to 5 V) or 0/0 VDC/VAC ( to 00 VDC, 5 to 6 VAC) Dimensions Input Current: Max.. VDC Max..6 0/0 VAC Max..5 0/0 VDC (5. watts per PoE port, 0 watts total for PoE output) Overload Current Protection: Present Connection: 0-contact terminal block Reverse Polarity Protection: Present Physical Characteristics Housing: IP0 protection Dimensions: 0 x x 5 mm (. x. x.0 in) Weight: IKS-66-PoE-F--T: 60 g IKS-66-PoE-F---T: 60 g IKS-66-PoE-F-HV-T: 600 g IKS-66-PoE-F-HV-HV-T: 6500 g Installation: 9 rack mounting Environmental Limits Operating Temperature: -0 to 5 C (-0 to 6 F) Storage Temperature: -0 to 5 C (-0 to 5 F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL (Pending) EMI: FCC Part 5 Subpart B Class A, EN 550 Class A EMS: EN (ESD) Level, EN (RS) Level, EN (EFT) Level, EN (Surge) Level, EN (CS) Level, EN Rail Traffic: EN 50- Note: Please check Moxa s website for the most up-to-date certification status. MTBF (mean time between failures) Time: 0,000 hrs Database: Telcordia (Bellcore), GB Warranty Warranty Period: 5 years Details: See Unit: mm (inch) Rear View 0.0 (.) 5.0 (.) 9. (.). (.) Top View.0 (.) Side View 5.0 (.0) 6.6 (.) 0.0 (.9) Front View info@moxa.com

3 Ordering Information Step : Select Ethernet switch system Step : Select interface modules IKS-66-PoE with power supply PM-00 series (Gigabit or fast Ethernet) Note: The IKS-66-PoE Ethernet switch system is delivered without interface modules. Please see pages - to determine which PM-00 interface modules are suitable for your application. IKS-66-PoE Modular Rackmount Ethernet Switch System Modular managed rackmount Ethernet switch system with 0/00BaseT(X) ports and 0/00BaseT(X) PoE ports, slot for fast Ethernet modules, and slot for Gigabit Ethernet modules. Supports up to +G ports and up to 6 PoE ports, -0 to 5 C operating temperature Front Cabling, Front Display Power Supply Isolated Power Supply Isolated Power Supply HV: to 00 VDC and HV: to 00 VDC and VDC ( to 5 V) VDC ( to 5 V) 5 to 6 VAC 5 to 6 VAC IKS-66-PoE-F--T IKS-66-PoE-F---T IKS-66-PoE-F-HV-T IKS-66-PoE-F-HV-HV-T Note: The IKS-66-PoE supports a total PoE power supply of 0 watts. Gigabit/Fast Ethernet Module Compatibility Chart for the IKS-66-PoE Module PM-00-GTXSFP PM-00-TX PM-00-MSCTX PM-00-MSTTX PM-00-SSCTX PM-00-MSCTX PM-00-MSTTX PM-00-SSCTX PM-00-6MSC PM-00-6MST PM-00-6SSC PM-00-LSC6TX PM-00-MST6TX PM-00-SSC6TX PM-00-MSC6TX PM-00-PoE PM-00-SFP PM-00- Slot Slot Optional Accessories (can be purchased separately) DR-5-/0-: 5/0 W DIN-Rail VDC power supplies MXview: Moxa industrial network management software with 50, 00, 50, 500, or 000 nodes EDS-SNMP OPC Server Pro: OPC server software that works with all SNMP devices ABC-0: Configuration backup and restoration tool for managed Ethernet switches, 0 to 60 C operating temperature Package Checklist IKS-66-PoE switch RJ5 to DB9 console port cable Protective caps for unused ports rackmount ears Documentation and software CD Hardware installation guide (printed) Warranty card info@moxa.com

4 PM-00 Series Gigabit and fast Ethernet modules for PT and IKS series switches Specifications PM-00-GTXSFP PM-00-GTXSFP RJ5 Ports: 0/00/000BaseT(X) auto negotiation speed, and auto MDI/MDI-X connection Fiber Ports: 000BaseSFP slots Note: The PM-00-G/G series Gigabit Ethernet combo modules support or SFP slots. See page - to select the SFP-G series Gigabit Ethernet modules for your application. PM-00-TX PM-00-6MSC PM-00-6SSC PM-00-6MST PM-00-MSCTX PM-00-SSCTX PM-00-MSTTX PM-00-MSCTX PM-00-SSCTX PM-00-MSTTX PM-00-LSC6TX PM-00-MSC PM-00-SSC PM-00-MST PM-00-MSC PM-00-SSC PM-00-MST PM-00-MST6TX PM-00-MSC6TX PM-00-SSC6TX PM-00-PoE PM-00-SFP* PM-00- PM-00-MTRJ PM-00-MTRJ PM-00-MST-FL PM-00-TX-PTP PM-00-MST-PTP PM-00-MSC-PTP PM-00-BNCMST-PTP * See page - and -9 to select SFP-G/FE series Gigabit Ethernet and fast Ethernet modules. info@moxa.com

5 STAT PWR PWR RING PORT PORT M M M M M M PT- STAT PWR PWR RING PORT PORT M M PT-0 STAT PWR PWR RING PORT PORT M M M M IKS-66 STAT PWR PWR STAT PWR PWR RING PORT PORT M M M M M PoE 6 5 PoE IKS-66 STAT PWR PWR FAULT LNK/ACT SPEED FDX/HDX IKS-6 Industrial Ethernet Solutions RJ5 Ports: 0/00BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection Fiber Ports: 00BaseFX ports (SC/ST/MTRJ or SFP LC connector) PoE Ports: IEEE 0.af Power-over-Ethernet Technology, provide up to 5. watts per port Ports: 0/00BaseT(X) auto negotiation speed, and auto MDI/ MDI-X connection BNC Ports: Time clock signal PPS (pulses per second) output for IEEE 5 time synchronization Ordering Information Optical Fiber Multi-mode 00BaseFX Single-mode Single-mode, 0 km Wavelength 00 nm 0 nm 550 nm Max. TX -0 dbm 0 dbm 0 dbm Min. TX -0 dbm -5 dbm -5 dbm RX Sensitivity - dbm - dbm - dbm Link Budget db 9 db 9 db Typical Distance 5 km a km b 0 km c 0 km d Saturation -6 dbm - dbm - dbm a. 50/5 μm, 00 MHz*km fiber optic cable b. 6.5/5 μm, 500 MHz*km fiber optic cable c. 9/5 μm single-mode fiber optic cable d. 9/5 μm single-mode fiber optic cable (0 km) PT-/PT--PTP/ PT- PT-0 IKS-66 IKS-66-PoE IKS-6 Slot Slot Slot Slot Slot Slot Slot Slot Slot Slot Slot Slot Modules PM-00-GTXSFP PM-00-GTXSFP PM-00-MSC PM-00-MST PM-00-MSC PM-00-MST PM-00-SSC PM-00-SSC PM-00-TX PM-00-MSCTX PM-00-MSTTX PM-00-SSCTX PM-00-MSCTX PM-00-MSTTX PM-00-SSCTX PM-00-6MSC PM-00-6MST PM-00-6SSC PM-00-MSC6TX PM-00-MST6TX PM-00-SSC6TX PM-00-LSC6TX PM-00-PoE PM-00-SFP* PM-00- PM-00-MTRJ PM-00-MTRJ PM-00-MST-FL PM-00-TX-PTP PM-00-MST-PTP PM-00-MSC-PTP PM-00-BNCMST-PTP PT- PT- PT--PTP PT-0 IKS-66 IKS-66-PoE Slots - P P P P P P P P P P P P P P P P P P P Slot P P Slots - P P P P P P P P P P P P P P P P P P P P P P Slot P P P Slot P P P P P P P P P P P P P P P P P P P Slot P P P P P P P Slots - P P P P P P P P P P P P P P P P Slot P Slot P P P P P P P P P P P P P P P P P Slot P IKS-6 Slot P P P P P P P * If you are using an SFP-FELLC module, the operating temperature is limited to -0 to 5 C (-0 to 6 F). Gigabit Ethernet Modules for PT and IKS Series Rackmount Ethernet Switches, PM-00-G/G Series Port Combo Port, 0/00/000BaseT(X) or 000BaseSFP* PM-00-GTXSFP PM-00-GTXSFP 5 info@moxa.com

6 Fast Ethernet Modules for PT and IKS Series Rackmount Ethernet Switches, PM-00 Series 0/00BaseT(X) Multi-mode, Multi-mode, TP PoE SC Connector ST Connector Port 00BaseFX Multi-mode, Single-mode, MTRJ SC Connector Connector PPS output, Single-mode, 00BaseSFP BNC SC Connector, connector 0 km PM-00-TX PM-00-6MSC 6 PM-00-6MST 6 PM-00-6SSC 6 PM-00-MSCTX PM-00-MSTTX PM-00-SSCTX PM-00-MSCTX PM-00-MSTTX PM-00-SSCTX PM-00-LSC6TX 6 PM-00-MSC PM-00-MST PM-00-SSC PM-00-MSC PM-00-MST PM-00-SSC PM-00-MSC6TX 6 PM-00-MST6TX 6 PM-00-SSC6TX 6 PM-00-SFP PM-00- PM-00-MTRJ PM-00-MTRJ PM-00-MST-FL PM-00-TX-PTP PM-00-MST-PTP PM-00-MSC-PTP PM-00-BNCMST-PTP PM-00-PoE 6 info@moxa.com

7 SFP-G Series -port Gigabit Ethernet SFP modules IEEE 0.z compliant Differential LVPECL inputs and outputs TTL signal detect indicator Hot pluggable LC duplex connector Class laser product, complies with EN 605- EN : 605 Specifications Ethernet Ports: Connectors: Duplex LC Connector or Simplex LC Connector (WDM-type only) Note: WDM-type SFP modules must be used in pairs (e.g., SFP-GXXALC and SFP-GXXBLC) Optical Fiber Gigabit Ethernet SFP-SX SFP-LSX SFP-LX SFP-LH SFP-LHX SFP-ZX SFP-EZX SFP-EZX-0 SFP-0A SFP-0B SFP-0A SFP-0B SFP-0A SFP-0B Wavelength 50 nm 0 nm 0 nm 0 nm 0 nm 550 nm 550 nm 550 nm TX 0 nm, RX 550 nm TX 550 nm, RX 0 nm TX 0 nm, RX 550 nm TX 550 nm, RX 0 nm TX 0 nm, RX 550 nm TX 550 nm, RX 0 nm Max. TX - dbm - dbm - dbm - dbm dbm 5 dbm 5 dbm dbm - dbm - dbm dbm Min. TX -9.5 dbm -9 dbm -9.5 dbm - dbm - dbm 0 dbm 0 dbm - dbm -9 dbm - dbm - dbm RX Sensitivity Link Budget Typical Distance - dbm -9 dbm -0 dbm - dbm - dbm - dbm -0 dbm - dbm - dbm - dbm - dbm.5 db 0 db 0.5 db 5 db 0 db db 0 db db db 5 db 0 db 550 m a km b 0 km c 0 km c 0 km c 0 km c 0 km c 0 km c 0 km c 0 km c 0 km c Saturation 0 dbm - dbm - dbm - dbm - dbm - dbm - dbm - dbm - dbm - dbm - dbm a. 50/5 μm, 00 MHz * km or 6.5/5 μm, 500 MHz * 50 nm multi-mode fiber optic cable b. 6.5/5 μm, 50 MHz * 0 nm multi-mode fiber optic cable c. 9/5 μm single-mode fiber optic cable Note: The actual communication distance depends on many factors, including connector loss, cable deployment, and the age of the cabling system. We recommend doing a link budget analysis and reserving a db margin for such factors. Environmental Limits Operating Temperature: Standard Models: 0 to 60 C ( to 0 F) Wide Operating Temp. Models: -0 to 5 C (-0 to 5 F) Storage Temperature: -0 to 5 C (-0 to 5 F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL , TÜV Warranty Warranty Period: 5 years Details: See info@moxa.com

8 Dimensions SFP-G Series SFP-GEZXLC-0 Unit: mm (inch). (0.5). (0.).0 (0.6). (0.). (0.5) Top View 5.0 (.) 55.5 (.) 56.6 (.) Side View Rear View TX 6. (0.) RX. (0.5) A.05 (0.) 0.90 (0.) (.) 0.05 (.) Top View.99 (0.9).6 (0.6) 0.55 (0.) 5.00 (.) Side View.00 (.) Rear View 0.60 (0.).0 (0.5).50 (0.) 9.0 (0.).05 (0.).9 (0.5) 0.0 (0.).0 (0.) 6.5 (0.).00 (0.).0 (0.5).69 (0.6) Ordering Information SFP Modules Standard Temperature (0 to 60 C) Wide Temperature (-0 to 5 C) 000BaseSX, 0.5 km 000BaseLSX, km 000BaseLX, 0 km 000BaseLH, 0 km Port 000BaseLHX, 0 km 000BaseZX, 0 km 000BaseEZX, 0 km SFP-GSXLC SFP-GSXLC-T* SFP-GLSXLC SFP-GLSXLC-T SFP-GLXLC SFP-GLXLC-T SFP-GLHLC SFP-GLHLC-T SFP-GLHXLC SFP-GLHXLC-T SFP-GZXLC SFP-GZXLC-T SFP-GEZXLC SFP-GEZXLC-0 * SFP-GSXLC-T: -0 to 5 C operating temperature WDM-type (BiDi) SFP Modules Standard Temperature (0 to 60 C) Availabe Models Wide Temperature (-0 to 5 C) 000BaseSFP, 0 km TX 0 nm, RX 550 nm TX 550 nm, RX 0 nm Port 000BaseSFP, 0 km TX 0 nm, RX 550 nm TX 550 nm, RX 0 nm 000BaseEZX, 0 km 000BaseSFP, 0 km TX 0 nm, RX 550 nm SFP-G0ALC SFP-G0ALC-T SFP-G0BLC SFP-G0BLC-T SFP-G0ALC SFP-G0ALC-T SFP-G0BLC SFP-G0BLC-T SFP-G0ALC SFP-G0ALC-T SFP-G0BLC SFP-G0BLC-T TX 550 nm, RX 0 nm The SFP-G series modules can be used with the following products: IM-GSFP, EDS-6/69 series, EDS-G509 series, EDS-5A series, EDS-50A series, EDS-P50 series, ICS-G6/G series, ICS-G56/G5 series, IM-G000-GSFP, IKS-G6 series, IKS-G65 series, IKS-656-GTXSFP series, PM-00-G/G series, EDS-G0 series, EDR-G90 series, IMC-0G series, PT-G509 Package Checklist SFP-G module Warranty card info@moxa.com

9 SFP-FE Series -port fast Ethernet SFP modules IEEE 0.u compliant Differential PECL inputs and outputs TTL signal detect indicator Hot pluggable LC duplex connector Class laser product; complies with EN 605- EN : 605 Specifications Ethernet Ports: Connectors: Duplex LC Connector Optical Fiber Fast Ethernet Standards and Certifications Safety: UL , TÜV Warranty Warranty Period: 5 years Details: See SFP-M SFP-S SFP-L Wavelength 00 nm 0 nm 550 nm Dimensions Unit: mm (inch) Max. TX - dbm 0 dbm 0 dbm Min. TX - dbm -5 dbm -5 dbm RX Sensitivity - dbm - dbm - dbm Link Budget 6 db 9 db 9 db Typical Distance km a 0 km b 0 km b Saturation 0 dbm - dbm - dbm a. 50/5 μm or 6.5/5 μm, 00 MHz * 00 nm multi-mode fiber optic cable b. 9/5 μm single-mode fiber optic cable Environmental Limits Operating Temperature: -0 to 5 C (-0 to 5 F) Storage Temperature: -0 to 5 C (-0 to 5 F) Ambient Relative Humidity: 5 to 95% (non-condensing). (0.5). (0.).0 (0.6). (0.). (0.5) Top View 5.0 (.) 55.5 (.) 56.6 (.) Side View Rear View TX 6. (0.) RX. (0.5) Ordering Information Wide Temperature (-0 to 5 C) 00BaseFX, Multi-mode, km Port 00BaseFX, Single-mode, 0 km 00BaseFX, Single-mode, 0 km SFP-FEMLC-T SFP-FESLC-T SFP-FELLC-T The SFP-FE series modules can be used with the following products: EDS-6/69 series, EDS-G509 series, EDS-G0-SFP, EDS-P50 series, ICS-G6/G series, ICS-G56/G5 series, IM-G000-GSFP, IKS-G6 series, IKS-G65 series, IKS-65-SFP series, PM-00-SFP, EDR-G90 series Package Checklist SFP-FE module Warranty card 9 Moxa Inc. All Rights Reserved. Updated Jun., 0. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.