OPTICAL FIBRE CABLES. for very-high bit transmission and FTTx networks

Transcription

1 OPTICAL FIBRE CABLES for very-high bit transmission and FTTx networks

2 OPTICAL FIBRE CABLES SILEC CABLE REFERENCES AND KNOW-HOW Since 1983, Silec Cable has successfully supplied the major telecom operators, contractors and distributors in more than 70 countries. All cables described in the present document can accomodate all optical fibre types available on the market (singlemode G 652 d - singlemode G 657x with small bending radius - singlemode G 655 and G 656 for DWDM - multimode 50/125 and 62.5/125 OM1, OM2 OM3 and OM4 types). The cable designs and the controlled manufacturing processes ensure maintaining the optical characteristics of the bare fibres (for example : no modification of attenuation and PMD values). Upon request, Silec Cable can offer a technical assistance : choice of solutions, information about laying and jointing of optical fibre cables, etc All Silec optical fibre cables can be installed using all existing laying and jointing techniques with no need of specific tools or devices. COMPREHENSIVE RANGE > ultra-compact cables (μsheath (*), μsheath ACCESS, μsheath MS and μcables) optimized to minimize installation and jointing costs > standard cables (loose tubes and UNIGAINE) > all applications : long haul, distribution networks, FTTx networks, and industrial purposes (installation in ducts, troughs, sewers, direct burial, building front, indoor, tunnels, aerial, ) > all environments (*) μsheath is a Silec Cable trademark. 2

3 FTTx NETWORKS OUTSIDE CABLE PLANT TRUNK CABLES Branching Point ACCESS CABLES Repartition Optical Node Flexibility Point Jointing Repartition DISTRIBUTION CABLES TRUNK CABLES DISTRIBUTION CABLES ACCESS CABLES μsheath CABLES (up to 864 OF) > Non armoured : ducts > Armoured (corrugated steel or glass yarns) : troughs, sewers, direct burial > Multi-purpose : all application and aerial installation μsheath ACCESS CABLES (up to 288 OF) > Non armoured : ducts and micro-ducts μcables (up to 12 OF) > Non armoured : micro-ducts & building fronts > Multi-purpose : all application and aerial installation 3

4 μsheath CABLES FOR LONG HAUL AND FTTx NETWORKS INNOVATIVE AND COST-EFFICIENT (OUTDOOR CABLE PLANT) μsheath CABLES ARE SUITABLE FOR ALL TELECOMMUNICATION NETWORKS : LONG HAUL BACKBONES, METRO RINGS, DISTRIBUTION AND LOCAL ACCESS. As compared to conventional cables, the μsheath design brings unique benefits inducing significant time- and cost-savings at all levels (engineering, civil works, laying, jointing), e.g. : > suitable to any type of fibre and environment, > ultra-compactness, lightweight, handleability, > modular design and easy entry/fibre access (both at cable end and mid-span), > suitable to all current laying and jointing techniques, > suitable to individual and mass splicing. Jelly filled coloured μsheath unit Bundle of units forming a coloured «super-unit» (if fibre-count > 288) + water- blocking swellable elements Tape (optional) Dielectric strength members embedded in a black PE sheath (*) for ducts and armoured cables or in an ivory LSZH sheath (*) for indoor cables Ripcords (optical) Corrugated steel tape or glass yarns for armoured cables Black HDPE sheath (*) for armoured cables (*) For specific requirements : please contact us. 4

5 DUCT DIELECTRIC μsheath CABLES Weight Outer diameter <_ 5.5 <_ 7.0 <_ 8.0 <_ 10.0 <_ 11.5 <_ 13.0 <_ 16.0 <_ 20.0 <_ 25.0 radius tensile load dan length (2) 12 8 Upon request STEEL TAPE ARMOURED μsheath CABLES Weight Outer diameter radius tensile load dan length (2) 6 4 Upon request GLASS YARNS ARMOURED μsheath CABLES Weight Outer diameter radius Upon request tensile load dan length (2) MULTI-PURPOSE (aerial, direct burial, ducts, ) μsheath CABLES (rigid flat FRP armoured) Weight Outer diameter radius tensile load (*) dan length (2) <_ 5 (*) for underground installation. HALOGEN-FREE ARMOURED μsheath CABLE PROTECTED AGAINST FIRE HAZARDS Up to up to up to up to 288 Weight Outer diameter radius tensile load dan length (2) 2 or 4 The maximum fibre-count is given for a 12 modularity. Other fibre-counts and modularities possible upon request. (2) Other delivery lengths possible depending on fibre types and reels required by customer. These cables can be tailored for specific requirements or to comply with Operator s Technical Specifications. Please contact us. 5

6 μsheath ACCESS CABLES, BLOWN μsheath MODULE and μcables FOR FTTx NETWORKS (OUTDOOR CABLE PLANT) μsheath ACCESS CABLES AND BLOWN μsheath MODULE FOR FTTx NETWORKS > μsheath ACCESS cables are downsized μsheath cables targeting low cost «last mile». > The Blown μsheath module is a micro-cable for indoor and outdoor installation, designed for subscriber access. > μcables are central tube micro-cables containing up to 12 optical fibres optimized for low-cost subscriber access and for all applications (ducts, building fronts, indoor, plinths, ). These 3 cable families are optimized for laying in micro-ducts. μsheath ACCESS CABLES FOR MICRO-DUCTS STANDARD μsheath ACCESS CABLES Jelly filled coloured μsheath unit containing up to 12 optical fibres Dielectric strength members Tape (optional) Black HDPE sheath (3) Fibre count Outer diameter (4), Maximum installation dan <_ <_ <_ <_ <_ <_ <_ <_ <_ <_ μsheath ACCESS CABLES FOR MICRO-DUCTS μsheath ACCESS II CABLES Jelly filled coloured μsheath unit containing up to 12 optical fibres Dielectric strength members Tape (optional) Ripcord (optional) Black sheath (3) Fibre count Outer diameter (4), Maximum installation dan <_ <_ <_ <_ <_ 144 Please contact us 6

7 BLOWN μsheath MODULE (MICRO-DUCTS) Strength members (models < 12 fibres) Filling compound Coloured inner sheath Outer transparent sheath with low friction coefficient Fibre count Outer diameter (4), Maximum installation tensile load, dan Watertightness Halogen free 1 up to YES YES <_ 2.05 μcables (DUCTS, BUILDING-FRONT, ) Filling compound Tube Dielectric strength members Black HDPE sheath (3) Fibre count Outer diameter (4), Maximum installation tensile load, dan Watertightness Stapling ability 1 up to YES YES <_ 5 μcables MULTI-PURPOSE CABLE (AERIAL, DUCTS, BUILDING-FRONT, ) Filling compound Tube Dielectric strength members Ripcord Black HDPE sheath (3) Fibre count Outer diameter (4), Maximum installation tensile load, dan Watertightness Span 1 up to YES 40 up to 60 M <_ 4.10 The maximum fibre-count is given for a 12 modularity. Other fibre-counts and modularities possible upon request. (2) Other delivery lengths possible depending on fibre types and reels required by customer. (3) For specific requirements : please contact us. (4) For other diameter values : please contact us. These cables can be tailored for specific requirements or to comply with Operator s Technical Specifications. Please contact us. 7

8 FTTx NETWORKS BUILDING CABLE PLANT DISTRIBUTION CABLE 2 LEVEL 0 / BUILDING CLOSURE 3 RISER CABLE Flame-retardant, halogen-free μsheath cable up to 288 OF or Flame-retardant, halogen-free μsheath MS cable (optimized for mid-span access) up to 144 OF or Flame-retardant, halogen-free μcable up to 12 OF or Blown μsheath module up to 12 OF or Outdoor cable suitable for building front installation 4 FLOOR CLOSURE 5 SUBSCRIBER CABLE Flame-retardant, halogen-free subscriber μcable with 1, 2 or 4 OF or Blown μsheath module with 1, 2 or 4 OF 6 SUBSCRIBER PLUG AND/OR HOME CABLING ACCORDING TO APPLICABLE STANDARDS 8

9 STANDARD μsheath CABLES, μsheath MS CABLES AND μcables FOR FTTX NETWORKS (INDOOR CABLE PLANT) STANDARD μsheath INDOOR CABLES FOR FTTX NETWORKS Standard μsheath indoor cables are dedicated to classical short-length mid-span access applications. They can be optimized for low bending radius applications requiring G 657 single mode optical fibres. INDOOR HALOGEN FREE (LSZH) μsheath CABLES Weight Outer diameter <_ 5.0 <_ 7.0 <_ 8.0 <_ 11.0 <_ 13.0 <_ 13.0 <_ 16.0 radius Upon request tensile load dan length (2) μsheath MS CABLES FOR FTTx NETWORKS μsheath MS cables are dedicated to long-length mid-span access applications. They can be optimized for low bending radius applications requiring G 657 single mode optical fibres. μsheath MS CABLES FOR MID-SPAN ACCESS Fibre count Outer diameter (4), (3) Maximum installation dan <_ 24 Please contact us <_ <_ <_ <_ 288 Please contact us 1. μsheath MS cable 2. Subscriber μcable 3. μsheath module inside a micro-duct 4. Splice(s) 5. Subscriber plug 6. Protection & routing 7. Closure 8. Floor closure μcables AND μsheath SUBSCRIBER CABLES These 2 cable families can be optimized for low bending radius applications requiring G 657 single mode optical fibres. INDOOR SUBSCRIBER FLAT μcable INDOOR SUBSCRIBER μcable μsheath SUBSCRIBER CABLE INDOOR μcable 1 up to 4 1 up to 4 1 up to 4 1 up to Outer (4) 2.5 x ,8 radius (3), dan Fire performance (LSZH) (3) YES YES YES YES Stapling ability YES YES YES YES Watertightness OPTIONAL OPTIONAL YES OPTIONAL <_ 5 <_ 5 <_ 5 <_ 5 The maximum fibre-count is given for a 12 modularity. Other fibre-counts and modularities possible upon request. (2) Other delivery lengths possible depending on fibre types and reels required by customer. (3) Smaller bending radius possible with G 657 optical fibres. (4) For other diameter values : please contact us. These cables can be tailored for specific requirements or to comply with Operator s Technical Specifications. Please contact us. 9

10 STANDARD LOOSE TUBE CABLES AND UNIGAINE CABLES Silec manufactures standard loose tube cables for all applications (duct, direct burial, tunnels, indoor, aerial, ) and an optimized family of central tube cables (UNIGAINE cables). LOOSE TUBE CABLES FOR LONG HAUL NETWORKS These cables are used for transport networks and long haul networks. Silec cable range includes the following models : dielectric cables for ducts, dielectric cables for direct burial, multi-purpose dielectric cables, steel armoured cables, cables protected against fire hazards (tunnels), self-supported and ADSS cables for aerial installation, underwater cables, and dual-purpose cables with metallic conductors. LOOSE TUBE CABLES FOR DUCTS GLASS YARNS ARMOURED LOOSE TUBE CABLES FOR DIRECT BURIAL AND DUCTS dan (3) 6 up to / 105 <_ 10 dan (3) 6 up to / 220 Consult us up to / 210 <_ 7 up to 144 Consult us STEEL ARMOURED LOOSE TUBE CABLES FIGURE «8» AERIAL LOOSE TUBE CABLES dan (3) 6 up to / 100 Consult us dan (3) 6 up to x (permanent) Consult us up to / 150 Consult us up to 144 Consult us MULTIPURPOSE (AERIAL, DUCTS, BURIAL) LOOSE TUBE CABLES (FLAT FRP ARMOUR) ALL DIELECTRIC SELF-SUPPORTING (ADSS) CABLES dan 6 up to / 770 Consult us up to 144 Consult us 6 up to 72 up to 144 dan Consult us (design & performance optimized versus climatic conditions and span up to 250 m or more) LOOSE TUBES CABLES FOR TUNNELS dan 6 up to / 100 Consult us up to 144 Consult us The maximum fibre-count is given for a 12 modularity. Other fibre-counts and modularities possible upon request. (2) Other delivery lengths possible depending on fibre types and reels required by customer. (3) Other values possible. These cables can be tailored for specific requirements or to comply with Operator s Technical Specifications. Please contact us. 10

11 UNIGAINE CABLES UNIGAINE CABLES FOR LONG HAUL NETWORKS AND INDUSTRIAL APPLICATIONS. UNIGAINE CABLES ARE DOWNSIZED AND COST-EFFICIENT CENTRAL TUBE CABLES CONTAINING UP TO 12 OPTICAL FIBRES. EXAMPLE : GLASS YARNS ARMOURED CABLE CABLE FOR DUCTS INDOOR / OUTDOOR CABLE (LSZH) STEEL TAPE ARMOURED CABLE GLASS YARNS ARMOURED CABLE DIELECTRIC UNIGAINE TT CABLES FOR DUCTS, DIRECT BURIAL, WIND-FARMS, FOR INDOOR / OUTDOOR INSTALLATION (LSZH) 1 up to 12 1 up to 12 1 up to 12 1 up to 12 1 up to 12 1 up to 12 Weight Outer diameter <_ 6.5 <_ radius tensile load dan Crush test dan/cm Impact test N.m Watertightness YES OPTIONAL YES YES YES OPTIONAL length 1 up to 10 1 up to 10 1 up to 6 1 up to 6 1 up to 6 1 up to 6 Jelly filled loose tube containing up to 12 fibres Dielectric strength members Black HDPE sheath (2) for outdoor cables (armoured or not) or ivory LSZH sheath (2) for indoor cables Corrugated steel tape or glass yarns for armoured cables Black HDPE sheath (2) for armoured cables Colour-coded optical fibres Jelly filled loose tube containing up to 12 optical fibres Glass yarns Dielectric strength members Black HDPE or LSZH sheath (2) Other delivery lengths possible depending on fibre types and reels required by customer. (2) For specific requirements : please contact us. These cables can be tailored for specific requirements or to comply with Operator s Technical Specifications. Please contact us. OTHER CABLES FOR INSTALLATION ON AERIAL HIGH-VOLTAGE POWER-LINES CABLES FOR WRAPPING (COE) AROUND HIGH / EXTRA-HIGH VOLTAGE AERIAL POWER LINES Fiber optic cable wrapping on phase or ground wires of aerial power lines (from low voltage to very-high voltage) is an interesting alternative for very-high bit rate counications in rural areas or between cities. Compared with traditionnal solutions (all dielectric self supporting cables, ), this solution brings cost-savings : no need of new civil-works, no need of poles reinforcement, OPTICAL PHASE GROUND WIRE (OPGW) FOR HIGH / EXTRA-HIGH VOLTAGE AERIAL POWER LINES General Cable group can offer a large range of OPGW cables up to 144 optical fibres. 11

12 TO CONTACT US ALGIERS Tel. : /22 info@enicab.dz ANGOLA Tel. : /7/8/9/17 condel@snet.co.ao EGYPT Tel. : elcairo@generalcable.es FRANCE Tel. : contact@sileccable.com GERMANY Tel. : info@nsw.com Tel. : remi.sibille@generalcable-de.com ITALY Tel. : rsalvaneschi@generalcable-it.com NORWAY Tel. : firmapost@generalcable.no PORTUGAL Tel. : info@generalcable-pt.com RUSSIA Tel. : info@generalcable-ru.com SPAIN Tel. : info@generalcable.es UNITED ARAB EMIRATES Tel. : sileccable@sileccable.ae UNITED KINGDOM Tel. : gward@generalcable-uk.com