LW Series offer flexibility in space-saving package
|
|
|
- Eunice Newman
- 6 years ago
- Views:
Transcription
1 ø22mm - W Series Oiltight W Series Switches and Pilot Devices: 22mm W Series offer flexibility in space-saving package Key features include: P board mount, solder or screw terminal ollective mounting saves space Non-reflective lens Highly visible marking plate Tamper proof construction ight touch reduces strain Gold or silver contacts emovable contacts simplify wiring and facilitate PB applications W Series switches and pilot lights can be mounted collectively on 1.0" centers. ombined with pcb terminals and locking lever removable contacts, this eases manufacture of pre-fab pushbutton arrays (as pictured). P Board tracing/soldering of contacts can be done in tandem with panel cutting/operator installation. All W series units mount by means of a locking ring that comes on from the rear of the panel, as such they can not be removed from outside the panel and are relatively tamperproof. ombining the snap action and tactile feel of miniature commercial pushbuttons with the size and ruggedness of industrial pushbuttons, W pushbuttons are a unique solution to many applications. hoose from standard silver contacts or low-level gold plated contacts. s available in.110" solder tab, M3 screw, or pcb pins. U ecognized File # E55996 SA ertified File No egistration No. J
2 Oiltight ø22mm - W Series Specifications Specifications Operating Temperature Storage Temperature Operating Humidity ontact esistance Insulation esistance Switch Unit Dielectric Strength Illumination Unit Vibration esistance Shock esistance Mechanical ife Electrical ife Degree of Protection Insulation Voltage 25 to +60 (without freezing) ED illuminated type: 25 to to to 85% H 50mΩ maximum (initial value) 100MΩ minimum (500V D megger) Between live part and ground: 2,500V A, 1 minute Between terminals of different poles: 2,500V A, 1 minute Between terminals of the same pole: 1,000V A, 1 minute Between live part and ground: 2,500V A, 1 minute Operating extremes: 5 to 55Hz, Amplitude 1.0mm p-p Damage limits: 1,000 m/sec 2 (Approx. 100G) Operating extremes: 100 m/sec 2 (Approx. 10G) Momentary: 1,000,000 operations minimum Maintained: 500,000 operations minimum Selectors: 250,000 operations minimum Momentary: 100,000 operations minimum (at 1,800 operations/hour) Maintained/Selector: 100,000 operations minimum (at 900 operations/hour) Watertight/oiltight IP65 (IE Pub529) (except key selectors) 250VA/D Materials Style enses Operators Marking Plates polyarylate polyacetate acrylic resin.110" Solder tab/quick connect P board terminal (gold contacts only) Screw terminal (DPDT units only) ontact atings ontact Material Thermal urrent ontact ating emarks 30VD/0.1A resistive Gold-clad cross-bar 3A Minimum applicable load (reference value): 5V, 1mA A/D. 125VA/0.1A resistive (Applicable range is subject to the operating condition and load.) ontact 5A 30VD/2A resistive 30VD/1A inductive 125VA/3A resistive(50/60hz) 125VA/2A inductive (50/60Hz) 125VD/0.4A resistive 125VD/0.2A inductive 250VA/2A resistive(50/60hz) 250VA/1.5A inductive (50/60Hz) A inductive load: PF=0.6 to 0.7, D inductive load: /=7ms maximum. amp atings ED Voltage 6V A/D ±10% 12V A/D ±10% 24V A/D ±10% 120V A ±10% 240V A ±10% urrent/wattage 17mA max 11mA max 11mA max 10mA max 10mA max U ecognized File # E55996 SA ertified File No Incandescent 6.3V A/D ±5% 1W 12V A/D ±10% 1W 24V A/D ±10% 1W egistration No. J ED lamps contains a built-in current-limiting resistor and reverse polarity protection diode. -109
3 Oiltight ø22mm - W Series ED and Incandescent Pilot ights (Sub-Assembled) emovable * + Operator + amp + ens = ompleted Unit * emovable terminals are applicable for PB terminated types only. Part Numbers: Pilot ight Operators Termination Style Solder P Board Screw ound W1P-00 W1P-0 W1P-00M Square W2P-00 W2P-0 W2P-00M 1. equires W-00V removable terminals in addition to operator. 2. Solder and screw terminals are unibody design (they do not use a removable terminal block). Part Numbers: enses Type ound W1A-P1-➁ Part Number Square W2A-P1-➁ In place of ➁, specify ens olor ode. Part Numbers: amps (not included in assemblies) Type Voltage Part Number ED 6V A/D±10% STD-6➁ 12V A/D±10% STD-1➁ 24V A/D±10% STD-2➁ 120V A±10% STD-H2➁ 240V A ±10% STD-M4➁ Incandescent 6.3V A/D IS-6 12V A/D IS-12 ➁ ED/ens olor ode olor ode Amber A Green G ed Blue S White W Yellow Y 24V A/D IS In place of ➁, specify the ED olor ode. 2. The ED contains a current-limiting resistor and reverse polarity protection diode. -115
4 ø22mm - W Series Oiltight Part Numbers: W1S Selector Switches Style Position ontact Material ontact Part Number Solder/Tab P Board Screw ound SPDT W1S-21 W1S-21V 90 2-position maintained Gold DPDT W1S-22 W1S-22V W1S-22M 3PDT W1S-23 W1S-23V SPDT W1S-25 DPDT W1S-26 W1S-26M 3PDT W1S position DPDT W1S-32 W1S-32V W1S-32M maintained Gold 3PDT W1S-33 W1S-33V DPDT W1S-36 W1S-36M 3PDT W1S Knob color: Black; Directional Indication olor: White 2. For contact operation, see next page. 3. For sub-assembly part numbers, see page Part Numbers: W1K Keylock Selector Switches Style Position ontact Material ontact Part Number Solder/Tab P Board Screw ound SPDT W1K-21A W1K-21VA 90 2-position Gold DPDT W1K-22A W1K-22VA W1K-22MA maintained 3PDT W1K-23A W1K-23VA SPDT W1K-25A DPDT W1K-26A W1K-26MA 3PDT W1K-27A 45 3-position DPDT W1K-32A W1K-32VA W1K-32MA maintained Gold 3PDT W1K-33A W1K-33VA DPDT W1K-36A W1K-36MA 3PDT W1K-37A Part Numbers: W1F ED and Incandescent Illuminated Selector Switches Style Position ontact Material ontact Part Numbers Solder/Tab P Board Screw ound SPDT W1F-210-➁ W1F-210V-➁ 90 2-position Gold DPDT W1F-220-➁ W1F-220V-➁ W1F-220M-➁ maintained 3PDT W1F-230-➁ W1F-230V-➁ SPDT W1F-250-➁ DPDT W1F-260-➁ W1F-260M-➁ 45 3-position maintained Selector and Keylock Switches (Assembled) 1. Every key selector uses an identical key. 2. The key is removable in all positions. 3. If a different configuration is required, contact an IDE representative for more information. 4. For contact operation, see next page. 5. For sub-assembly part numbers, see page Gold 1. In place of ➁, specify color code. See previous page for color codes. 2. amps must be ordered separately for all illuminated pushbuttons. See previous page. 3. For contact operation, see next page. 4. For sub-assembly part numbers, see page PDT W1F-270-➁ DPDT W1F-320-➁ W1F-320V-➁ W1F-320M-➁ 3PDT W1F-330-➁ W1F-330V-➁ DPDT W1F-360-➁ W1F-360M-➁ 3PDT W1F-370-➁ -116
5 Oiltight ø22mm - W Series ontact Operations ontact Operation: Selector and Keylock Switches Position 90 2-Position Maintained ontact SPDT DPDT 3PDT eft N Operator Position and ontact Position (Top View) eft enter ight N ight N eft enter ight N N N _ eft N N ight N eft enter ight N N N eft ight eft ight eft ight DPDT N N N N N N 45 3-Position Maintained 3PDT eft enter ight eft enter ight eft enter ight N N N N N N N N N Arrangements (Bottom View): W and W B Pushbuttons 3 pole illuminated 2 pole illuminated 3 pole non-illuminated amp (+) X1 N N N amp (+) X1 N N N N N amp ( ) amp ( ) SPDT has, and N only on the center. DPDT has,, and N only on the right and left. SPDT has, and N only on the right. DPDT has,, and N only on the right and center. -117
6 Oiltight ø22mm - W Series Dimensions: Selector and Keylock Switches, continued and ayouts W1F ED and Incandescent Illuminated Selector Switches M3 Screw over W-V2M over W-V P Board (solder) t Gasket ocking ing TOP OK Anti-otation ing 47 Tab (solder) Width t Panel Thickness: 0.8 to 6 mm ound ø25.8 OK 16.2 ound w/square Bezel Screw P Board Solder/Tab Screw P Board Solder/Tab X1 N N OK OK ayouts W P Board Drilling ayout P Board Bottom View 0.265" (6.8mm) 0.189" (4.85mm) 0.265" (6.8mm) 0.254" (6.5mm) W B P Board Drilling ayout P Board Bottom View 0.265" (6.8mm) 0.189" (4.85mm) 0.265" (6.8mm) Pilot ights P Board Drilling ayout P Board Bottom View 0.047" (1.2mm) 0.443" (11.35mm) ø0.047" (ø1.2mm) holes Mounting Hole ayout ø0.87" +0.02" - 0 (ø " mm) " (26mm) Note " (1.2mm) ø0.047" (ø1.2mm) holes 0.047" (1.2mm) 1. When determining mounting centerlines, allow for easy operation. 2. Mushroom (Ø 1.17" (Ø 30mm)) = 1.248" (32mm) Tab terminal = 1.014" (26mm) (with/without terminal cover) P board terminal = 1.014" (26mm) Screw terminal = 1.56" (40mm) 3. Mushroom (Ø 1.17" (Ø 30mm) = 1.248" (32mm) Tab terminal = 1.053" (27mm) (with terminal cover) Tab terminal = 1.014" (26mm) (without terminal cover) P board terminal = 1.014" (26mm) Screw terminal = 1.014" (26mm) ø0.047" (ø1.2mm) holes 1.014" (26mm) Note 3-123
Type Contact form Model
Low Signal Relay G6A High sensitivity can be driven by digital circuits. Low-profile design allows use in.70 mm (0.50 in) PC board rack. Surge withstand meets FCC Part 68 regulation. Units can be mounted
Magnecraft Power Relays
Description DPST-NO, 30 A; DPDT, 30 A (NO) / 3 A (NC) Description The series power relays offer a small package size and features Class F insulation for a maximum coil temperature of 55 C (3 F). These
Type Contact form Model PCB SPDT G6E-134P-ST-US G6E-134PL-ST-US. Type Contact form Model
Low Signal Relay G6E Subminiature 7.87 H x.1 W x 16 L mm (0.31 H x 0.3 W x 0.63 L in). High sensitivity with pick-up coil power of 8 mw. Surge withstand meets FCC Part 68 rule and Telcordia 2.5 kv Specifications.
Magnecraft General Purpose Relays 782 Power Series SPDT 20 A; DPDT 15 A
72 Power Series SPDT 20 A; DPDT 15 A UL listed when used with proper Magnecraft sockets The 72 Plug-in Power relays offer clear or full-feature covers with multiple mounting options and accessories. Feature
1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for
Type Contact form Model Ag (Au clad) Standard DPDT G6A-274P-ST-US Low-sensitivity DPDT G6A-274P-ST40-US
Low Signal Relay G6A Fullly Sealed Relay with High Impulse Withstand High sensitivity can be driven by digital circuits. Low-profile design allows use in 12.70 mm PC board rack. Surge withstand meets FCC
MILITARY SPECIFICATION SHEET
INCH POUND MIL-S-22885/100A 16 May 2003 SUPERSEDING MIL-S-22885/100 (USAF) 27 August 1982 MILITARY SPECIFICATION SHEET SWITCH, PUSH BUTTON, ILLUMINATED, 4-LAMP, SPDT AND DPDT, 7.5 AMPERES, SILVER CONTACTS,
Lighted Pushbutton Switch (Square) Ultra Bright LED Type
New Products Lighted Pushbutton Switch (Square) Ultra Bright LED Type Large Square-bodied Lighted Pushbutton Switches New models added with Ultra LEDs. New models with ultra bright LEDs added to single-screen
Ø50mm Shaft Multi-Turn Absolute Type
Ø50mm Shaft Multi-Turn Absolute Type Diameter Ø50mm Shaft Type Multi-Turn Absolute otary Encoder Features Total 23-bit resolution (8388608-division) of 10-bit single-turn (1024-division) and 13-bit multi-turn
Solid-State Digital Timer
Solid-State Digital Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay,
LH1D Series Surface Mount Indicators
Jumbo Dome LH1D Series Surface Mount Indicators IDEC LED Spider (100506) Excellent Visibility From the front and the side. New ø66 Jumbo Dome Ideal for Mounting on IP67 Protection Can be used in environments
Fiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements
NO: PH-165 PRODUCT: E3S-X3, E3X-NL, E3X-NM DATE: August 2012 TYPE: Discontinuation Update Fiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements Affected
3.5. Control Relays and Timers. Contents. 9575H Series 3000 Type AA, AC and DC. General Purpose Relays Type AA
.5 9575H Series 000 Relay Contents 9575H Series 000 Type AA, AC and DC Product Selection....................... Accessories............................ Technical Data and Specifications........... Dimensions............................
APPLIANCES /// MTA, CST-100 II AND SL-156 CONNECTORS. CONNECTORS/ APPLIANCES MTA, CST-100 II and SL-156 Connectors
PPLINCES /// MT, CST-100 II ND SL-156 CONNECTORS CONNECTORS/ PPLINCES MT, CST-100 II and SL-156 Connectors Contents Introduction This catalog has been designed to assist you, our customer, identify products
30 mm Push Buttons 9001 K and SK Selector Switches
30 mm Push Buttons 9001 K and SK Selector Switches NOTE: To order, add prefix 9001 to the beginning of the catalog number. Table 19.184: 4-Position Selector Switches Contact Block Position Side 2 Side
Contactors. Agency approvals. UL 508 Guide No. NLDX2, File # E CE/Semko Certified EN :1991 IEC DP 30 C 3P - 1 /B
Contactors Applications Type DP provide high performance with flexibility and reliability, designed to match numerous applications including: Motors Power supplies Food service equipment Compressors Business
Magnecraft General Purpose Relays 750R Series DPDT and 3DPT, 10 A
and 3DPT, 10 A UL Listed when used with proper Magnecraft s The 750R series octal base, plug-in relays offer clear or full-feature covers with multiple mounting options and accessories. 750R 750R Full-Feature
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES SGRF300 SGRF300D SGRF300DD SGRF303 SGRF303D SGRF303DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil
ALLEN BRADLEY TIMING RELAY
ALLEN BRADLEY TIMING RELAY Configuration Details Product: 700-HS12BA1 Description: 700-HS General Purpose Square Base Timing Relay, On Delay Timer, 1.0 to 180 seconds, DPDT, 120V AC 50/60Hz CONTROL RELAY
Bimetal Temperature Switch
Phone: +44 19 635533 Fax: +44 19 635262 Data sheet 608301 Page 1/8 Bimetal Temperature Switch Special features Electromechanical temperature switch with a fixed switching temperature Protection type IP52,
LoopBack Relay. SGLB363 Series. With Built-in AC Bypass Capacitors / DC LoopBack Relay
LoopBack Relay SGLB363 Series With Built-in AC Bypass Capacitors / DC LoopBack Relay SERIES DESIGNATION SGLB363 RELAY TYPE LoopBack Relay, Sensitive Coil, Surface Mount Ground Shield and J-Leads with AC
Interface Connectors for Miniature, Portable Terminal Devices
NEW Interface Connectors for Miniature, Portable Terminal Devices ST Series Strong locking mechanism Right Mating direction Left Top 9N max. Overview Developed as external input/output connectors for the
Agency approvals UL 508 Guide No. NLDX2, File # E CE/Semko Certified EN :1991 IEC DP 30 C 3P - 1 /B
11 Applications Type DP provide high performance with flexibility and reliability, designed to match numerous applications including: Motors Power supplies Food service equipment Compressors Business machines
SA1J-F: Full Color Fiber Optic Sensors
Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain ice: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com This new line of full color sensors offers
relays Electromechanical 2006 /2007
1 Electromechanical relays 2006 /2007 miniature relays industrial relays automotive relays interface relays plug-in sockets and accessories 2 Relays and Sensors - our business! Established in 1935 to manufacture
30 mm Push Buttons 9001K and SK Selector Switches
30 mm Push Buttons 9001K and SK Selector Switches NOTE: To order, add prefix 9001 to the beginning of the catalog number. Table 19.178: 2-Position Selector Switches Contact Block Required 1 Contact Closed
20 mm Beam Pitch General Purpose Area Sensor. Distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment)
OTHER SUNX PRODUCTS SERIES 0 mm Beam Pitch General Purpose Area Sensor Diagnosis Self-diagnosis Test input Interference prevention Wide sensing area of 7 m,60 mm with 0 mm beam pitch Refer to p.9l for
Automatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces
Automatic s 2004 Automatic. All rights reserved. pdf 1.0 3-18-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable Plugs...................
02/11/2015
DIN Rail Mount 17.5 mm MUS/MUSF 80 AC/DC Part number 84872141 Control relays monitoring their own power supply - MUS : Over/undervoltage control Selectable latching (memory) function - MUSF : Over/undervoltage
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-22885/111A 5 September 2000 SUPERSEDING MIL-PRF-22885/111(EC) 14 August 1992 PERFORMANCE SPECIFICATION SHEET SWITCHES, PUSHBUTTON, LIGHT EMITTING DIODE (LED) ILLUMINATED, STANDARD, NIGHT
Series CDP2 Definite Purpose Contactors
Series CDP2 Definite Purpose Contactors High performance economical contactors for commercial applications up to 90 Sprecher + Schuh s Definite Purpose contactors are ideal for commercial applications
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES SRF00 SRF00D SRF00DD SRF0 SRF0D SRF0DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient suppression
30 mm Push Buttons 9001 K and SK Selector Switches
www.schneider-electric.us 30 mm Push Buttons 9001 K and SK Selector Switches NOTE: To order, add prefix 9001 to the beginning of the catalog number. Table 19.181: 3-Position Selector Switches Contact Block
M-relays, 2, 3 or 4 pole, 7-12 A Datasheet
, 2, 3 or 4 pole, 7-12 A Datasheet Features Compact plug-in design 2, 3 or 4 C/O contacts Standard mechanical indicator Flat and silver relay pins for excellent connection in socket Wide range sockets
90 Series - Sockets and accessories for 60 series relays
90.0 olour BLUE BLAK BLUE BLAK lamp terminal socket: panel or mm rail (EN 00) mount 90.0 90.0.0 90.0 90.0.0 Identification tag 090.00. Modules (see table below) 99.0 Timer module (see table below).00,.0,.0
AC1036. Definite Purpose Contactors
Definite Purpose Contactors Definite purpose contactors Definite purpose Contactors Applications Type DP contactors provide high performance with flexibility and reliability, designed to match numerous
MILLITARY SPECIFICATION SHEET
INCH-POUND MILLITARY SPECIFICATION SHEET 10 November 2000 SUPERSEDING MIL-R-6106/14B 10 March 1989 RELAY, ELECTRIC, PERMANENT DRIVE, 50 AMP, SPDT (DB) DOUBLE MAKE DOUBLE BREAK AUXILIARY CONTACTS (5 AMP),
Magnetic and Hydraulic-Magnetic Circuit Breaker
Magnetic and Hydraulic-Magnetic Circuit Breaker 850-... Description Single, two, three and four pole magnetic and hydraulic-magnetic circuit breakers with trip-free-mechanism and toggle or rocker actuation.
ZN-PD. Smallest Air Particle Sensor in the Industry for In-line Measurement. Air Particle Sensor. Features
Air Particle Sensor Smallest Air Particle Sensor in the Industry for In-line Measurement Suitable for continuous measurement. With Realtime Clean Air Monitor. Be sure to read Safety Precautions on page
SERIES BNC 50, COAXIAL MINIATURE CONNECTORS
SERIES BNC 50, COAXIAL MINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER BNC is still one of the most popular connector series, featuring a two stud bayonet coupling mechanism, which is particularly
Series CDP2 Definite Purpose Contactors
Series 2 Definite Purpose High performance economical contactors for commercial applications up to 90 Sprecher + Schuh s Definite Purpose contactors are ideal for commercial applications including air
Non Magnetic Connectors Product Catalog
Non Magnetic Connectors Product Catalog Introduction Johnson s Non-Magnetic Connector Additions Offer Solutions to MR Imaging Technology Johnson, a product line of Cinch Connectivity Solutions, has expanded
EXPlora. Introduction
Introduction EXPlora The EXPlora range is most suited to manufacturers of ancillary electrical equipment such as motors, pumps, lighting equipment, process and control gear for use in factories and plant
PBC series. RoHS. Ready. IEC-Type Contactors & Accessories 9-80 Amp AC-3, Amp AC-1 AC Coils. P&B PBC Series IEC Type Contactors & Accessories
PBC series IEC-Type Contactors & Accessories 9-80 Amp AC-3, 25-125 Amp AC-1 AC Coils File E38802 (PBC) RoHS Ready Users should thoroughly review the technical data before selecting a product part number.
Super Side. Sense type
Front ense type Photoelectric ensor Photoelectric ensor series uper ide ense type uper ide-sense Type projects the beam from the mm (.9 inch) of wide edge of the sensor. M pig-tail connector types are
Model Number Structure
Cycle Control Units CSM DS_E_7_1 Refer to Safety Precautions for All Power Controllers. Used in Combination with the to Enable High-precision Temperature Control Use cycle control to achieve power control
10 SERIES. Light dependent relays A
10 SERES 10 SERES Relays for automatic control of lighting according to the ambient light level ntegral light sensor For pole or wall mounting 10.32-2 O 16 A output contacts 10.41-1 O 16 A output contact
AS09..S 3-pole Contactors - Spring Terminals
4 kw 5 hp AS09..S 3-pole Contactors - Spring AC Operated Description - 3-pole contactors with spring terminals, - N.C. or N.O. built-in auxiliary contact, - Rail-mounted, no tools required, - Additional
SECTION 4 TABLE OF CONTENTS
Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for
Proportional output thumbwheels - sprung to centre
New! HR series Distinctive features and specifications High reliability, long life HR-A-R Sealed to IP68 Backlighting option EMI/RFI shielding Other detent options on request Patented solution ENVIRONMENTAL
2 2 Relay outputs. M DIN W72 H7mm. LE7 Weekly/Yearly timer
LE7M-2 W72 H72mm, Weekly/Yearly Timer Features Easy to check and change the program setting Customizable weekly or yearly unit time setting and control by user Includes daylight saving time function Built-in
Assembly. Front view. LEDs. Parametrization interface. Power Bus
otation Speed Monitor Features Assembly 1-channel signal conditioner 2 V DC supply Input for 2- or -wire sensors Input frequency 10 mhz... 50 khz elay contact output Start-up override and restart inhibit
Photoelectric Sensors E3F2
Photoelectric Sensors E3F2 Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Switch M18 DIN-sized cylindrical housing Housing materials: plastic, nickel
Touch Panel Display Module
Touch Panel Display Module Introduction The E-Plex 367TPD series has a resistive touch panel, with s for status indication and a 4-digit, 7-segment numerical display allowing valuable information to be
Movable Contacts Heavy duty silver cadmium oxide composition to resist welding and contact erosion for greater reliability
Compare These Features Built-in Shock bsorber Reduces contact bounce for longer life. Coil Dust Cover Keeps dust and dirt away from magnet and coil area. Coil Class B (1300 C Insulation System) with wide
PERFORMANCE SPECIFICATION SHEET CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE THREE-POLE, AUXILIARY CONTACTS
INH-POUND MIL-PRF-39019/6H 14 May 0 SUPERSEDING MIL-PRF-39019/6G 27 ugust 1997 PERFORMNE SPEIFITION SHEET IRUIT REKERS, MGNETI, LOW-POWER, SELED, TRIP-FREE THREE-POLE, UXILIRY ONTTS This specification
Absolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm
Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Up to 6GHz Transmission Speed Mated Height Comparison (With E.FL series) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
Data Sheet. HSMW-C120, HSMW-C130, HSMW-C191, HSMW-C197, HSMW-C265 White ChipLEDs. Description. Features. Applications
HSMW-C12, HSMW-C13, HSMW-C191, HSMW-C197, HSMW-C265 White ChipLEDs Data Sheet Description These white ChipLEDs come in unique shades of white and provide product differentiation for backlighting application.
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-22885/112 1 April 2005 PERFORMANCE SPECIFICATION SHEET SWITCHES, PUSHBUTTON, WHITE LIGHT EMITTING DIODE (LED) ILLUMINATED, STANDARD, NIGHT VISION IMAGING SYSTEM (NVIS) AND SUNLIGHT READABLE
Weekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N
Weekly Timer 1/4 DIN Size Timer Features Prompted Programming and Large LCD Display 24 hours x 7 days programming using just 5 switches 16 program steps and cycle operation Two independent 15 A control
.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.
Optical SERIES 61K High Resolution, 4-Pin FEATURES 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available Sealed Version Available Rugged Construction Cable or Pin Versions 10 Million Rotational
SENSORS S62. Compact Sensors - S62. The most complete universal sensor in a compact 50x50 mm housing. Sensors with red, infrared LED or LASER emission
Compact Sensors - S6 S6 The most complete universal sensor in a compact x housing Sensors with red, infrared or LASER emission from 3 cm to m Polarized retroreflective up to 0 m Multivoltage 4-40Vac/4-60Vdc
Features. Applications
HSMx-C1/C177/C197/C265 High Performance Chip LEDs Data Sheet Description These chip type LEDs utilize Aluminium Indium Galium Phosphide (AlInGaP) material technology. The AlInGaP material has a very high
MaxiBridge mm Connectors. Ed Full-scale MaxiBridge 8 Pins Catalog E
MaxiBridge 2.54 mm Connectors Ed. 10 11.2014 Full-scale MaxiBridge 8 Pins Catalog E 074593 CABLE CONNECTOR SYSTEM GENERAL MaxiBridge Male and Female Connector The 2.54 mm single and dual row cable connector
Advantys STB DATA SHEET. Advantys STB Output Module. Description. Features
Advantys STB Advantys STB Output Module DATA SHEET Description The Advantys model STBDAO5260 Digital Output Module provides 2 isolated discrete output points that operate on a 115 VAC power source. The
Online data sheet SGS4-S108P3PS2W03 SLG SWITCHING AUTOMATION LIGHT GRIDS
Online data sheet SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS A B C D E F H I J K L N O P R S T Detailed technical data Features Technology Ordering information
SPACESCAN SERIES SS 02
Description 0-10 metre sensing range 12 to 384 channels Available with channel spacing of 5, 10 or 20 mm Active length of 225 mm to 1920 mm Housing length of 300 mm to 1980 mm Plug connection 18-30 V dc
PATCH PANEL Easy Patch INSTRUCTION MANUAL
Page 1 BDA82-0 PATCH PANEL Easy Patch 96 Bantam (TT) Jacks 50 pin D-subminiature NPPA-TT-SD50 Easy Patch NPPA-TT-SD50 Page 2 BDA82-0 Index page 1 Electrical configuration 3 2 Re-Configuration and Replacement
Single Point Flow Monitor SW118 SW119
SW8 SW9 SW8 SW9 Single point flow monitors with MIN/MAX monitoring function, suitable for water, oil, air and media with similar thermal conductivities (selectable by means of a medium switch). With either
HN Connectors. Automatic Connector. Introduction. Contents. 631/ FAX 631/
Connectors Introduction 2004 Automatic Connector. All rights reserved. pdf 1.0 4-13-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable
Photoelectrics Through-beam Type PA18C.T..., DC
Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:
HDRFI Series Tensolite High-Performance Cable & Interconnect Systems. High Density RF Interconnect
HDRFI Series Tensolite High-Performance Cable & Interconnect Systems High Density RF Interconnect HDRFI is a patented Tensolite connection system that transfers high frequency signals through a unique
Weekly Time Switch. Rated time Time setting range Time division 24 hrs x 7 days 00:00 to 23:59 1min
Weekly Time Switch Easy Programming with Large LCD Display and Interactive Functions Programming for 24 hrs x 7 days using just five switches. Sixteen program steps available. Power supply freely selectable
Amphenol. Amphenol-Tuchel Electronics GmbH. C 112 Series M12 - Connectors
Amphenol Amphenol-Tuchel Electronics GmbH C 112 Series M12 - Connectors We connect con The company Amphenol-Tuchel Electronics is a worldwide leader in electrical connectors and contacting devices. Our
INNOVATION IN MAGNETICS DS3434/5. Mag612. Miniature Three-Axis Fluxgate Probe.
INNOVATION IN MAGNETICS DS3434/5 Mag612 Miniature Three-Axis Fluxgate Probe www.bartington.com Mag612 Miniature Three-Axis Fluxgate Probes Mag612 Miniature Three-Axis Fluxgate Probe This miniature fluxgate
E8Y. Micropressure Sensor with Easy-to-Read Digital Display. Differential Pressure Sensor. Ordering Information. Sensors
Differential Sensor Micropressure Sensor with Easy-to-Read Digital Repeat accuracy of ±1% FS (setting resolution: 0.01 kpa), high-precision pressure control available. Compact design (31 mm) saves mounting
Features. Applications. Part Number Color Package Description
HSMF-C16x Miniature Bi-Color Surface Mount ChipLEDs Data Sheet Description This series of bi-color ChipLEDs is designed with the smallest footprint to achieve high density of components on board. They
EZ Encoder : Optical Incremental
1. Introduction The EZ25 Encoder is a 2.5 incremental optical encoder, designed for optical shaft encoder motion control and precision sensor systems. Our ET7272 available models are short circuit proof
FLEXISTRIP RGB 60 FLEXIBLE SERIES
FLEXISTRIP RGB 60 Our Flexistrip RGB 60 is a high brightness, high quality, yet slim-line and flexible LED profile, offering clients the ability of full colour change or pure white illumination with a
AA3528VR4AS-W2 3.5 x 2.8 mm Surface Mount LED Lamp
3.5 x 2.8 mm Surface Mount LED Lamp DESCRIPTIONS The source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use
Pluggable interface relays CR-M Miniature relays
2CDC 293 035 F0004 CR-M 1 2 4 3 5 Features Standard miniature relays with mechanical status indication 12 different supply voltages: DC versions: 12 V, 24 V, 48 V, 60 V, 110 V, 125 V, 220 V AC versions:
DIN Connectors DIN06 E-03
DIN Connectors DIN0 E-0 Contents Introduction HOSIDEN DIN connectors are supplied to electronic equipment manufacturers both in Japan and overseas and are very well accepted because of high quality, a
Safety dialogue solutions
Characteristics 5 Environment Conformity to standards Products XY2 CH, XY2 CE: EN/IEC 60947-5-1, EN/ISO 13850:2006, UL 508 and CSA C 22-2 n 14 (with suffi x H7) XY2 CB: EN/IEC 60947-5-1, EN/ISO 13850:2006,
Cylindrical Photoelectric Sensor CY-100 SERIES
Cylindrical Photoelectric Sensor CY-00 SERIES Listing (2 m cable length type only) Features Wide product range Shape: Standard type Side view type Connector: 2 m cable length type M2 plug-in connector
Data Sheet. HSMx-C280. Miniature ChipLED. Features. Description. Applications. Device Selection Guide
HSMx-C28 Miniature ChipLED Data Sheet Description The HSMx-C28 ChipLEDs are designed to 42 (1. x.5 mm) industry standard footprint. They are extremely small in size and the low.4 mm height makes them very
LED control gear Compact dimming. Uconverter LCAI 2x38 W 0500 K013 one4all ECO series. Ordering data
Product description Dimmable built-in for LED Constant current (with 2 adjustable output channels) Designed for outdoor and street luminaire Output power 2 x 38 W Suitable for mains voltage peaks (burst/surge)
Interface Relays and Optocouplers Product group picture
Interface Relays and Optocouplers Product group picture /1 ABB Catalog 2CDC 1 004 C0208 Interface Relays and Optocouplers Table of contents Interface Relays and Optocouplers Interface Relays and Optocouplers
Emergency lighting units EM powerled
CE CPS 12/15 W ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation
WP36BHD T-1 (3mm) Blinking LED Lamp
T-1 (3mm) Blinking LED Lamp DESCRIPTIONS The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is
0.4 mm Pitch, Horizontal mating, Board- to-fine Coaxial Cable Connectors
0.4 mm Pitch, Horizontal mating, Board- to-fine Coaxial Cable Connectors DF49 Series Reliable connection 0.7±0.1 (Mated height) (0.5) Effective mating length Figure. 1 Mis-insertion Prevention Features
Kingbright. L-7104YD-12V T-1 (3mm) Solid State Lamp DESCRIPTIONS PACKAGE DIMENSIONS FEATURES APPLICATIONS ATTENTION SELECTION GUIDE
T-1 (3mm) Solid State Lamp DESCRIPTIONS The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode Electrostatic discharge and power surge
7 SEGMENT LED DISPLAY KIT
ESSENTIAL INFORMATION BUILD INSTRUCTIONS CHECKING YOUR PCB & FAULT-FINDING MECHANICAL DETAILS HOW THE KIT WORKS CREATE YOUR OWN SCORE BOARD WITH THIS 7 SEGMENT LED DISPLAY KIT Version 2.0 Which pages of
LAMPS & INDICATOR LAMPS
LAMPS & INDICATOR LAMPS 10.5 M16 x 1.0 55-056-0 Bulk 12V140mA lead wire lamp 55-056-2 Display Package (2) 19.5 14.0 12.0 20.4 7.5 50.4 55-120-0 Bulk NE-2 Neon bulb 55-120-2 Display Package (2) T 3-14 (10mm)
C Connectors. Automatic Connector. Introduction. Contents. C Interface Options. 631/ FAX 631/
utomatic onnector onnectors Introduction 2004 utomatic onnector. ll rights reserved. pdf 1.0.1 3-23-04 ontents Specifications........................... 2 Straight Plugs...................... 3 Right ngle
Series MCX 50 micro miniature connectors
Series MCX 50 micro miniature connectors Description Content MCX 50 HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size,weight, durability and performance for applications
CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions
CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance
Hybrid Chart Recorder 250 mm (10")
Hybrid Chart Recorder 250 mm (10") RD5100 Series U High Speed Scanning at 36 Points/Sec and High-Speed Recording U High Accuracy of 0.05% U Various Industrial Values Can be Measured at the Same Time with